Using volume control to work with MuVo MP3 Slim

I have a Audigy 2 ZS board with Creative T7700 speakers which work quite well. I also have a MuVo Slim MP3 player. The question is on the side of the volume control there looks to be a similar insert to a USB port. My instructions say I can use it with my MuVo but when I hook it up using the USB wire it does nothing. Does this work on only selected MP3 Players and if so I wish I knew before I bought this one. Actually it works excellent except for this feature.

william240,
I believe you are referring to the M-Port at the volume control. It's compatible with our MuVo NX player but not with MuVo Slim.
Jason

Similar Messages

Tecra P5 - Volume control doesnt work properly

Hi
Since upgrade to Windows 7 64 bit I can't turn the volume all the way down by using the volume control at the front of the notebook. Worked fine under Vista 32 bit.
The volume control still works but no matter how far I wind it to the left there is still sound coming from the speakers.
Any help appreciated.
Thanks
Warren

As far as I know volume control in the past was mechanical but now it works on different way and it is controlled by specific tool/utility.
To be honest Tecra P5 is not known to me but obviously it is Australian notebook model and according to Australian support page this notebook model is not supported for Windows 7.
That doesnt mean you cannot use it but this means there is not software package designed for Windows 7 that can be installed so I think there is no much you can do about it.
I know it is annoying but for volume control you can use Windows option placed in task bar.

How to handle the table control While working with LSMW?

How to handle the table control While working with LSMW?

its possible in lsmw,
Hi,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Thanks

Works with an mp3 tape cassette adapter?

Well i have two questions.
Will the Iphone work with an mp3 cassette adapter? The one you put in a cars tape deck for those who do not know what I am talking about.
I read that the a new 3G iphone will be released sometime 2008. Some sites have said it would be early 2008. Any credibility to this?

Yes the cassette tape will work but you must get a headphone adapter to make it compatable. I have heard the same rumors but no one really knows except apple.

Volume controls stopped working properly for my LED Display

The volume controls stopped working properly for my LED Display (Mac Pro OS-X 10.6.8). The sliders go up and down, and the clicks are audible, but the sound levels remain the same. The internal speaker sound settings/controls are working properly. I tried restarting to no avail.

Resetting NVRAM?
http://support.apple.com/kb/HT1379?viewlocale=en_US

Remote control's volume doesn't work with external soundcard

I use an external EDIROL FA-101 firewire soundcard connected to my macbook. Ofcourse I listen to music and watch movies with my computer just like we all do. But the problem is, that I can't control volume using apple remote. It only works for the integrated soundcard. It probably isn't hard for it to control volume of the iTunes, instead of the main volume (which doesn't control my external soundcard's volume). It just isn't comfortable at all (and I'm not going to use the integrated soundcard, because of what it sounds like).

I'm not sure there's anything we can do for you here. You may be able to do something with an additional remote, like a bluetooth phone and Salling Clicker, to execute AppleScripts to control the volume control on your card.
-Doug

DV9700 Volume Controls not working after motherboard replacement

I have a HP Pavilion DV9702ea, which I've had for just over two years now. It worked absolutely fine for me in every way since I got it until about one month ago when I installed some software that required me to restart Windows. The laptop shutdown but did not restart. I tried to switch it back on but it would not work - when I pressed the power button the power light would blink for perhaps half a second but that was it. After some internet searching I ascertained that this is a symptom of a common problem with these laptops and that it suggested that the GPU had failed, which meant I needed a new laptop.
So I ordered a new laptop using the model number shown on the sticker near the RAM ports. It arrived and I installed it. Now my laptop is fully working again - all except for the volume controls. On the control panel above the keyboard, all of the QuickPlay keys (Q, DVD, previous, Play/Pause, next and stop) are illuminated but the volume control keys (mute, - and +) are not. I have Windows Vista installed with the correct audio driver and it does not respond to me pressing these keys, so it's not just that they're not lit up, they're not working at all.
I've tried everything that I can think of to fix this - as far as I'm concerned it should not be a software issue, because these keys are supposed to be illuminated from power-on, so even without a hard drive or an operating system installed these keys should be lit up. Nevertheless I've tried making sure all the audio, QuickPlay, QuickLaunch and QuickTouch drivers are up to date and have tried alternate drivers for all of them. I've checked the cable leading from the motherboard to the controls - it appears to be intact, but I even ordered a replacement just in case and that has made no difference. I've extensively Googled the problem and the most promising fix that I could find (that is repeated on these forums several times) was to power off the laptop, remove the mains adapter and battery, hold the power button down for 30 seconds to discharge any static and then power on again. I've tried that a few times and it has not fixed the problem in my case.
So I'm at a loss now. My last resort will be to return the motherboard for a replacement, but that will obviously be a lot of hassle for me as I'll have to strip down the laptop to remove it and I'll be without a working laptop for a day or so. And then, if it's not a motherboard fault, I'll have put a lot of effort into not getting anywhere. So is there anything else I should try?
Any help would be much appreciated.

I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
Try buying the ribbon cable first, it is much cheaper compared to switch panel.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Volume control not working after I plug in speakers or headphones

When I turn on my 13 inch with Mac OS X version 10.6.8 or if I restart it, my volume works perfectly. However, whenever I plug in earphones or speakers the volume will be 'stuck' on the loudest it can go. When I use the volume controls on my keyboard or the slider at the top menu bar, it will make the clicking sound as if the volume is going up or down and will show the white speaker with the volume being adjusted but the volume will stay on the loudest possible setting. Even after I unplug my speakers/headphones the volume will continue to not work. There is no red light coming from the headphone jack and since it works upon startup, I'm inclined to think it's a software issue and not a hardware issue but then again, I don't know the first thing about computers. Since this has started, I've looked online for similar problems or suggestions but nobody has had this exact same issue, but I did follow the suggestions for similar issues. I repaired the disk (I could only do it for the Macintosh but I am running bootcamp with windows on the other side but I've used it maybe once for a pc only program and have never run the internet on it so I doubt the problem is coming from that side). It repaired a bunch of stuff but it didn't fix my issue. I also reset the PRAM and the NVRAM (I don't know what this does, but someone suggested it so I gave it a shot) and it did nothing. If you have a suggestion for something I can do, please be detailed, or point me to detailed instructions because my computer knowledge is very limited but I'm willing to work to fix this. Thank you!

Make an appointment at the Genius bar at the Apple store.
Ciao.

Will remote control earphones work with the nano 5th gen?

I've been trying to figure out if the remote control earphones will work with the 5th generation nano. It doesn't look like it comes with it, which is very sad, so I'm wondering if it would be worth it to buy it separately. Does anyone know if you can still use it to change songs and volume etc. on the nano? Please help!

Good to know! Thank you very much

IPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!, iPad2 No Sound (7.0.4) even after Reset, YES I have tried using volume controls!

I have an iPad2 that has recently been updated with 7.0.4. After turning off my iPad, I lost all audio from the iPad. Speakers work because when in Setting>Sounds> the ringer options work. YES, I have tried using the volume controls. But now the volume controls only control the ringer options.
I have changed the option under settings for the lock out to mute and back to lock out.
I have reset all setting
I have turned off and on
I have done are hard reset (holding the 2 buttons down).
I have erased everything and started all over reset.
I still have now sound from my iPad. Again the speakers work, when I go to sound under setting and play with the volume of the ringer it plays the sound.
Why is my controls now only for a ringer after the UPDATE. Is my iPad2 a paper weight?

Alright I have made some progress. I used compressed air and then rubbing alcohol to clean contacts. I first powered off the iPad2 and cleaned with air. Then I used the new toothbrush and rubbing alcohol to clean the contacts (really not sure how that works, but I will try anything at this point). Twice the ipad turned on when cleaning contacts.
Outcome I now get sound from typing on the ipad like the typewriter sound. I did not have that before, but still no audio from apps or youtube, or anything else.

Iphone 4s side volume control not working

Hi,
I own iPhone4s and off late the side volume control keys have stopped responding. I am unable to change the volume using those keys (Option to change the volume using keys under settings tab in on). When I press them a notification flashes on the screen for ringer showing no bars. I miss any calls/messages/alerts due to this. I tried cleaning the charging port as suggested in other posts, but the problem still persists. Sometimes those keys start working automatically and at other times, they don't. It seems more of a software problem since I am able to click photos using those buttons. Please help.

Hello KookieMonsta187,
Thanks for the question. After reviewing your post, it sounds like there is a problem with the headset. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
If your headset isn't working - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Volume control doesnt work through headphones.....

hello
i have a iphone 3gs, and i am using the headphones i got with the phone,
the problem im having is, the volume control on the headphones dont work, the middle button works, like i can change songs and pause, but for some reason i cant up or down the volume through the headphones, i have done it before through the headphones but now they dont work,
is there something i need to do? like any settings or is it a fault in the headphones!!
please help meeeeeee!!!

Plug the headphones in and out a few times while a song or something is playing. This has worked a few times for me. If this doesn't work then turn the iPhone off and back on. This will more than most likely fix your problem.
Make sure you are on the most current firmware. If this doesn't fix it then you could back up your data and then do a restore. Still nothing ... make an appointment with Apple to look at it. Good Luck!

Remote Control does work with Sylvania Color TV/DVD Model 6520FDF

I cannot get the remote control to work the volume on a Sylvania Color TV/DVD Model 6520FDF TV. Can anybody help me?

Have you tried the scan mode to scan for the proper code?
TV/DVD combo units are notoriously hard to program to universal remotes. So if you did a scan and none of them worked then the likelihood is that the remote just will not work with that unit. If you have not tried a scan, here is the instructions to do so.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the TV key in step 2 and 3.) 1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK. 4. Release both keys. The Device Keys will blink twice.5. Press 9 - 2 - 2. 6. Point the remote at the TV.
7. Press PLAY.8. Press FASTFORWARD (FF). Every time you press FF the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off. (You can press REWIND to go back.) 9. When the TV turns off, you have found the right code. Press OK to store this code. Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing Exit.
Message Edited by spacedebrismark on 05-17-2009 02:26 PM
====================================================================================
Error exists between keyboard and chair.

Unable to use volume control ipod itouch 5.1.1

hello,
itouch didn't have a problem with volume slider until recently. through other websites, i have since located the volume slider in music playing mode by double tapping the home button and scrolling to the left but it lacks any button to scroll to increase the volume. music plays well via a sound dock but that has it's own volume controls. sometimes when docking it plays through the handset speakers until seated correctly so i know the internal speakers do work.
any light on the matter would be very much appreciated!!!

I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now.
Steve

What remote controls will work with the iMac 27inch.

Okay I hung the new iMac on the wall in my kitchen. Used the apple adapter I have a little apple remote control that works the dvd player fine. Of course the wireless keyboard and the wireless mouse work fine. I have an elgato tuner because this iMac is my dvr/tv does anyone have a remote that will work the iMac as a dvd and work the elgato hybrid tuner. Just trying to make this simple. Thanks

iTunes itself, that is it's built-in remote speaker function, will work only with an Airport Express. There may be other wireless speakers that have their own drivers or transmitter; someone else here may be able to make a recommendation.
Message was edited by: Dave Sawyer

Using volume control to work with MuVo MP3 Slim

Similar Messages

Maybe you are looking for