Using Volume Keys to Change Walkman Tracks

Hi Guys,
Is there a way to change the playing tracks in walkman app without going to the screen?
In my previous walkman phone, you could do that by long pressing a volume key or even shake control I heard in other models.
Not able to do that in Z1.
Suggestions?
Regards

Hi,
This is no function that Xperia Z1 or the preinstalled WALKMAN application have. Perhaps you can find another music player on Google play that have the functions that you are looking for.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Unable to use volume key

    N95- cannot increase the volume using the volume key.is there any other way i can increase the volume of music on music player.
    Message Edited by ashtraykid on 12-Aug-2008 01:18 PM

    Have you tried using the volume control on the remote that's supplied with the N95?
    If your volume key no longer works you should take it to a nokia care point for repair.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • Using + and - keys to change dates and times; Find and Replace event

    Hi all, \
    I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
    1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
    2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

    Don,
    ...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
    I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
    Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
    AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
    ;~)

  • How to set my volume keys to change volume rather than activating narrator

    is there a setting that i can change so that the narrator won't automatically activate when i press the volume button? i'm having windows 8 and i'm not used to it. i'm really getting annoyed that everytime i'm supposed to change the volume it suddenly
    activates the narrator

    Hi,
    If this just happened recently, this might be caused by some other applications, which result in keys conflict.
    In this case, I suggest to remove the applications to see the result.
    Regards
    Wade Liu
    TechNet Community Support

  • Using A Key To Change A Patch

    I'm using MainStage in a scenario that requires a number of quick patch changes in tightly scripted music.
    In one particular situation that change is so tight that I want to assign one of the keys on the (piano) keyboard to change the patch. That is, I want one of the notes in a passage that I'm playing to cause the patch to change to the next in line.
    This was pretty simple to accomplish.
    The problem is that when the command was mapped to the MIDI note at the patch level (not at the Concert or Set level) it disabled that note's ability to trigger audio from the soft-synths. This happened not only for that note in that patch, but for that note for all the patches in the concert.
    I want the key to both change the patch and continue to function as a playable note.
    Any idea on how to do this?

    The main thing that I'm trying to figure out is this:
    If I map a parameter to a note played on the keyboard, why does it disable that note from triggering a pitch as well? Keep in mind that the patch change command was set at the 'patch level' (not the 'concert' or 'set level'. I don't know why the mapping would affect anything outside of that patch.
    I haven't considered the multi-channel solution. It's not an important enough problem for me to search out a solution that could impose other unknown issues at this point.
    I know that Kurzweill's can easily use a MIDI note as a 'patch increment' command without disabling that note's sound-triggering function. I wonder how to do it in MainStage.

  • No longer able to use + and - keys to change dates or time?

    I recently upgraded from an igloo iMac running OS 10.3.9 to a new Mac mini with 10.5.8 (awaiting upgrade to Snow Leopard).
    I used to use the + and - keys all the time to change dates and time in iCal, but have been unable to since my upgrade. Has that functionality been deleted, or is there a way to do it that I have just not discovered yet?
    Thanks.

    Forgotten Passcode or device disabled after entering wrong passcode
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • APO DP - use of key figure change mode 'Redisaggregate'

    I am using the macrobuilder in APO DP V5.
    Here one can use a 'redisaggregate' change mode for a key figure.
    But what is a practical example where this could be relevant and useful?
    Thanks,
    Bob Austin, Atos Origin

    Srinivas,
    Thanks for this.
    I now understand the concept.
    But what does the 'redisaggregate macro' look like?
    Suppose I have key figure X with disaggregate key figure APODPDANT.
    I have a fcst run at high level, and I recalculate APODPDANT.
    What is the structure of the macro to now apply the new APODPDANT values?
    Is it something like key figure Y (change mode = redisagg) = key figure X?
    Thanks,
    Bob.

  • Using SHIFT Key to change/create libraries

    I recently moved my I-tunes from my PC HD to an EHD for more space. I used the "Hold Down Shift Key" when opening itunes to create a new library for the EHD. How do I delete the old library (all files are gone from it) so I can click on the Itunes desktop icon and open the new library without getting the dialog box to choose a library?

    I recently moved my I-tunes from my PC HD to an EHD for more space. I used the "Hold Down Shift Key" when opening itunes to create a new library for the EHD
    rAe you creating a new library or moving the old library?

  • Thinkpad T420 freezes when using FN keys to change brightness

    Had to reinstall Arch on my laptop. Now when I click on the FN+HOME (Brightness UP) or FN+END (Down) buttons the laptop locks up solid.
    My other FN keys seem to work fine although some are not defined properly.
    I've looked at the logs  and searched everywhere with no luck in figuring out why it's doing this. I'm sure it's something really simple but I'm stumped.
    Not sure what information you need so I'll provide what I can....
    From the Laptop article in the wiki I have "acpi_backlight=vendor" in my menu.lst file. I tried removing it but then my laptop hangs during bootup on loading udev.
    My DAEMONS line in /etc/rc.conf:
    DAEMONS=(hwclock syslog-ng netfs dbus acpid alsa lightdm hdapsd wicd crond)
    MODULES:
    MODULES=( thinkpad_acpi tp_smapi hdaps thinkpad_ec vboxdrv )
    I know this laptop has the Nvidia Optimus setup but I only have the Nvidia card enabled (which gives me really sucky battery life).
    # lsmod | grep nv
    nvidia              12066843  33
    i2c_core               20492  3 i2c_i801,nvidia,videodev
    nvram                   5869  2 thinkpad_acpi
    Any ideas?

    Hspasta wrote:I have a T420 and The blacklight controls worked for me out of the box without any configuration. Did you try these additional things because it didn't work out of the box?
    Not sure what you mean by 'additional things' but I hadn't tried using the brightness functionality until just recently when I noticed the problem.
    Some of the other modules, etc are so that I can do things like have the automatic hard drive parking enabled, etc.

  • Using volume keys to see messages on external display on 8220

    for some reason, this function sometimes work and sometimes doesn't work on my phone. I think I have the right settings as it sometimes work.
    anyone know what the issue is?
    thanks
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    What have you tried to resolve the problem?
    Start with a basic battery pull.
    Bifocals
    No data will be lost when doing the following: pull the battery while the device is ON. Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed.
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • How to set current row in table after use tab key on inputText

    Hello all,
    My first post .., I'm newbie in ADF and I will try to explain my problem.
    For the moment we use ADF 11g (11.1.1.4), in a jsff page I have a table with an inputText column.
    On the valueChangeListener of the inputText, I invoke a method in a viewScope bean which call an EJB method, make some services in the EJB on the line modified. After that I refresh the VO and the table (because others values on the line have been modified) and reset the focus on the same inputText modified by the user with javaScript because focus was lost after refresh.
    So far, everything works fine.
    When I use the arrow keys to change the selected row in the table, it's work fine (focus is still in the next or previous inputText), but if user try to use tab key to change the current line, the inputText on the next line have the focus but the current row of the table is not changed (I think it's normal).
    My question : how can I change the current row after tab key pressed in this case ?
    I don't know if it's really clear, not easy to explain, don't hesitate to ask more details.
    Thanks in advance.

    Frank Nimphius wrote:
    Hi,
    My question : how can I change the current row after tab key pressed in this case ?
    Use a client event to listen for the keyboard entry and intercept the tab. The use af:serverListener to call the server to set the rowKey on the table and issue a PPR for the table to re-paint
    See sample 11 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples
    to learn about how to use the client listener and server listener
    FrankHi,
    Thanks a lot for your advices, I used the client and server listener
    I used this code on the method call in order to change the selection after key tab pressed, I don't know if it can be easier, but it works.
              if (LOGGER.isDebugEnabled()) {
              LOGGER.debug("START changeSelectedRow");
              RowKeySet oldRowKeySet = myTable.getSelectedRowKeys(); // get oldRowKeySet
              if (oldRowKeySet == null) {
                   if (LOGGER.isDebugEnabled()) {
                        LOGGER.debug("oldRowKeySet is null");
                   return;
              RowKeySetImpl newRowKeySet = new RowKeySetImpl(); // The new RowKeySet use to change the selectedRow
              DCIteratorBinding bindingIterator = ADFUtils.findIterator(MY_ITERATOR);
              bindingIterator.setRangeSize(-1);
              // set the new index of the current row.
              int index = bindingIterator.getCurrentRowIndexInRange();
              if (index < bindingIterator.getAllRowsInRange().length - 1) {
                   index++;
              bindingIterator.setCurrentRowIndexInRange(index);
              // get the current row after changed the index
              Row currentRow = bindingIterator.getCurrentRow();
              if (currentRow != null) {
                   ArrayList nextLst = new ArrayList(1);
                   nextLst.add(currentRow.getKey());
                   newRowKeySet.add(nextLst);
                   // set the new selectedRow
                   myTable.setSelectedRowKeys(newRowKeySet);
                   SelectionEvent selectionEvent = new SelectionEvent(oldRowKeySet, newRowKeySet, myTable);
                   selectionEvent.queue();
                   AdfFacesContext.getCurrentInstance().addPartialTarget(myTable);
              if (LOGGER.isDebugEnabled()) {
                   LOGGER.debug("END changeSelectedRow");
    Best Regards
    Benjamin

  • Phone set on Vibration but switches to silent when volume keys pressed

    I have my phone set to vibrate for all my notifications but when I touch the volume keys it switches to silent. How do I disable the volume keys from changing the notification profile

    You can't.  That is a shortcut key to enable silent.  It happens when you turn the volume all the way down and then down one more.  With the latest update the volume keys are locked while the phone is locked unless media is playing.

  • Volume keys no longer functional?

    the volume keys quit working on my wired aluminum keyboard this morning.
    nothing new, just stopped wrking. other function keys seem to still be working.
    tested on 10.7 and 10.8.
    tried installing keymap to see if the keys could be tricked into returning, but sadly, no. volume not working with the keyboard any longer.
    this is a wired keyboard. F11 (volume down) now does some thing where it makes stuff on screen slightly larger to fill the screen.
    I am suddenly surprised how often i use volume keys now that they do not work.

    thanks, checked every possible combination to restore the volume keys using the keymap4macbook preference pane (what a dumb name, but it is free). working correctly again.

  • Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

    Hi , I cant use the music bar in the control center I can only change the volume but I cant skip tracks or pause the song or play it. anyone knows the solution or the reason please?

    That's normal.
    Use the Touch ID to unlock passcode.
    http://help.apple.com/iphone/7/#/iph672384a0b

  • How to change the key of a MIDI track

    There has to be an easy answer for this.
    I have a Midi drum loop that I am using. I have changed the instrument so instead of the MIDI notes playing through a drum synth it is using one of logic's piano software instruments.
    What I am trying to do is change the KEY of this loop. It seems to only play in C. If I go to the piano roll, copy all the notes of the loop and move the notes up or down, I was thinking I should be able to alter the key/chord that the loop is playing. However, no matter what I do, the loop still seems to be in C.
    What is going on? And what can I do to easily change the key of this loop?

    How is Space Designer keeping the MIDI track in the same key of C
    I have no idea. I would normally think that such a thing is not possible.
    What is the instrument? What happens if you create a new track, and load this instrument, and create a new midi region, and load SD? Same problem? What about if you do this in a new project? Same problem?

Maybe you are looking for