Using vriables in To field when using "Schedule For" option

My Software:
Crystal Reprts Server XI R2
My Scenario:
I am using the "Schedule For" option when scheduling a report to a group of people.  The email address i want to use is based on the their user name.  That is
SI_USERID(AT)domain.com
So i tried setting the "To" field with the following
%SI_USERID%(AT)domain.com
this didn't seem to work.  Am i using the right variable?
As a note, when i used %SI_EMAIL_ADDRESS% in the "To" field it worked BUT as i'm trying to avoid entering an email address into every user i would rather use something like %SI_USERID%(AT)domain.com
Thanks
PS: Had to use (AT) instead of @ as the post was dissallowed for having email adresses in it.

Solution found:
%SI_OWNER% will return the user name. So
%SI_OWNER%(AT)domain.com will work
On a note the documentation on which variables are available seems scarce to me

Similar Messages

  • Using just the TV screen when using HDMI port?

    Hi,
    I have the Macbook Pro with retina display and I was wondering how I could use just the TV screen when using HDMI port. I don't want mirroring displays, just one on the TV.

    With the TV connected and the MBP plugged into the mains (i.e. not running on battery power) close the lid.  The MBP will go to sleep, wake it up with an external keyboard or mouse - which must be connected in advance, or paired in advance if a bluetooth keyboard/mouse.

  • On G71-340US: very low volume when using DVD player, but OK when using Windows Media Player.

    Just purchased new laptop G71-340US.  Volume (at full tilt) is decent when using Windows Media Player, but when using DVD player, volume is so low I can't really hear volume on a movie unless room is completely quiet, and I am right in front of laptop. Any suggestions, or is it really this bad?

    I don't have the answer, but I certainly agree. The G71-340us is severly under powered in the audio department. You would think with the extra room in the 17in. chasis they could have put a sound system with a lot more power. Other than that it's a great machine.

  • TS4268 Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

    Does Iphone4 support Facetime Audio/Video using 3G? Or only when using Wifi?

    iPhone 4 does not support FaceTime over cellular, only Wi-Fi.
    You need iPhone 4S or later and also only if the carrier supports it, 

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

  • PDF does not save filled out fields when using browser

    Hello! I have a couple PDFs that I've uploaded to my website for clients to fill out and download. I'm getting complaints that clients are filling out the form, saving it to their computer, but when re-opening the now saved form, none of the fields are filled out.
    Am I doing something wrong? I've provided the forms to be savable in the security functions, and I tested it myself after downloading the PDF and filling it out in the browser (as it automatically opens in browser), and saving to my PC, I re-open the PDF and it is empty of any of the fields I filled out.
    Please help! This is causing my clients to lose faith in me!
    Thank you!

    Which version of Acrobat are you using?
    Just to confirm, when you say "I've provided the forms to be savable in the security functions," did that mean you (using Acrobat XI as an example):
    File menu > Saved As Other... > Reader Extended PDF > Enable More Tools (includes form fill-in & save)

  • Why should we select all key fields when using for all entries

    Hi,
    Why should we select all key fields in our select query when using for all entries statement?
    I read about for all entries but this point was not clear in any post.
    Please explain me
    Regards,
    Subhashini

    Dear Subhasini,
    It is because FOR ALL ENTRIES deletes the duplicate entries before populating the target internal table.
    Please do an F1 on FOR ALL ENTRIES & read the SAP documentation.
    I mean how duplicate entries will not get deleted when we use this?
    Quite simple, if you select  all key fields then each entry will be unique & there will not be any duplicate entries to delete !!
    BR,
    Suhas
    Edited by: Suhas Saha on Oct 16, 2009 9:41 AM

  • Missing Search Field when using 3.1 Create App Wizard ?

    Hi
    2 points which look like bugs to me;
    1 - In all previous versions whenever I used the create app wizard to build up a list of pages, reports always included the 'search across any varchar field' funtionality. This seems to have disappeared when using the Classic form of reports. It is obviously there if you use an Interactive report.
    2 - Again when using the Create App wizard, if I use the Classic form (in order to be able to also 'Generate Analysis Pages') these do get built, but not linked in any way (tab, list region, button etc) to any other pages. I can link them myself, but I am demonstrating APEX here and it doesn't look so good....
    Can someone just quickly confirm I am not going mad here ?
    Jules

    Hi Jules,
    You're not going mad! I've reviewed the behaviour of the Search field and the Analysis Pages link using releases 3.0.1 and 3.1.1, and there is a difference in behaviour between the two versions.
    Classic Reports generated via the Create Application Wizard in 3.1.1 should have a Search text field above the report region, however this field is missing. I've logged bug 7185486 for this issue. Classic Report&Forms generated via the Create Application Wizard, with the "Include Analysis Pages" option selected, are missing a link to the Analysis pages in 3.1.1. I've logged bug 7185486 for this issue. I've updated both bugs with a workaround. A fix for these issues will be available in a future release. Thanks for bringing these two issues to our attention.
    Regards,
    Hilary

  • Splitting of text fields when using multiple fonts within a text field and exporting it to XFL.

    Hi All,
    I have been trying out  InDesign and exported files to XFL for use in Flash. If I use a single font for a text box then everything looks fine in flash, but if  I use multiple fonts for the same text box its split into multiple text boxes. For making this more clear I have attached an image.
    Any help to resolve this!!!

    Paragraph styles are tied to the paragraph, not the page.
    You don't say which version you are using, but here's something you could try in CS3 or CS4. Set up a baseline grid in the preferences to match the main pages. The spacing should match the leading of the body text. Make a special paragraph style (you can base it on the body text style) that you will apply to text onthe chapter start page, and as part of that style set it to align to baseline grid. Now for the trick. Select the  text frame onthe start page and define a custom baseline grid with the spacing you want. Save it as an object style, too, while you're at it. The strating text should align to the custom grid on the start page and the documetn grid on the next page.
    Peter

  • Tab key used as the shortcut key when using a text entry box

    When I use the Tab key as my shortcut key for a text entry box, it works fine in preview mode but does not work in the web browser preview mode.  I have tried to understand how I can take an existing project that is built for web browser application and make the tab key work.  The only thing I have been able to make my text feild entry take me to the next slide is to have the user click Enter instead of Tab and that is not the typical way we move between fields in the real application.  So....simulations is not accurate.  Can you give me step-by-step instructions on how to correct this problem in an already existing project?

    I think that you need to disable "Seamless Tabbing" in your file for it to work when published.
    You need to edit the HTML file that launches your course manually.
    Open your HTML file in notepad or equivalent
    Between the <object> </object> tags add:
    <param name="SeamlessTabbing" value="false">
    Save the HTML file again
    /Michael
    Click here to visit the www.captivate4.com blog

  • Why don't I see the 'Emoticons' and 'Format' tabs when composing a message in the new Yahoo Mail, using Firefox, but I do when using Internet Explorer?

    I have been using the new Yahoo Mail on Firefox. But today I noticed that when I write an email (Compose/Reply/Forward), I cannot format it. Only the 'Attachments' tab is present, but the 'Emoticons' and 'Format' tabs are not.
    But when I do it using Internet Explorer, all those tabs are present and I can format and do whatever.
    Is there something wrong with my Firefox? I have restarted my computer, I have shut it down, but my Yahoo Mail remains problematic when using Firefox.

    Firefox only allows you to save executable files. If you want to add an option to run them you can use the OpenDownload² add-on - https://addons.mozilla.org/firefox/addon/opendownload-10902

  • Lion quites when using excessive CPU, Lion quites when using excessive CPU

    When using my computer and have several programs open and reach around 60-80% cpu usage.. my computer will just quite and boot me to the log on page. This is quite a pain since I lose oeverything I was currently working on. Is this a known issue and is apple looking for a partch?

    When using my computer and have several programs open and reach around 60-80% cpu usage.. my computer will just quite and boot me to the log on page. This is quite a pain since I lose oeverything I was currently working on. Is this a known issue and is apple looking for a partch?

  • How to use alias in "From" field when I send a mail with utl_smtp ?

    Hi all,
    I'm using a PL/SQL package with an Oracle 11G database to send mails. It works fine but instead of use of my mail in "From" field like "[email protected]" as sender E-mail address, I would like to have "Toto" in the sender address. I tryied to use utl_smtp.mail(l_connection, '<toto> [email protected]') but it doesn't work. The only way I can send mail is when I set utl_smtp.mail(l_connection, '<[email protected]>') directly. When I use the Alias, I have an error from smtp server telling that I use a bad syntax address.
    Does someone know how to use the alias ? Where do I do a mistake ?
    Thank you for your help.
    sis2b

    Thank you, I find how to solve the problem thanks to your link.
    I try to send HTML E-mail so I had the From in the from field writen in the header of the mail and not to initialize the connection.
    sis2b.

  • How to hide selection fields when using logical database PNP

    hi.
    i m using a logical database PNP and report catagory 1PY_DEF in my program.
    but when i execute it , it shows to selection box. one name is period and second is selections.
    but i just want to show only period box selection fields , not the selection box fields.
    how it iz possible.

    HI,
    In my case i haved used the PNP logical database..in the selection box i don't wnat to display Contorling area,Cost Center & Organizational Unit. i have written this code to hide those fields..
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF screen-name CS 'PNPKOKRS' OR
           screen-name CS 'PNPKOSTL' OR
           screen-name CS 'PNPORGEH'.
          screen-active = '0'.
          screen-invisible = '1'.
          MODIFY SCREEN.
          CLEAR screen.
        ENDIF.
      ENDLOOP.
    Try modify hide the total block instead of individual fields in that block.

  • Why I cannot process a disabled field when using htmldb_item

    I have a report that has this in the select statement
    case when c.sec_lic_status in (1,2,7,505,1002,1004,1005) then
    htmldb_item.text(2,sum( distinct a.fee_variable),8,20)
    else
    htmldb_item.text(2,sum( distinct a.fee_variable),8,20,'disabled')
    end "Quantity 1"
    The above shows correctly. If there are 2 records one field is disable and the other is enabled.
    I have a process that fires on submit - after Computations and Validations. But the records don't changed when updating the enabled one.
    In debugging and writing to a file using the UTL_FILE package, I'm able to pinpoint that the disable fields are the problem.
    Is there a trick on manually processing disabled fields?
    I've found that when I uncheck the show box in the report, I cannot use the fields either. This is not a problem, just another comment.
    My main problem is what do I have to do to manually process a disabled field.
    Thanks for your help, comments, pointers, or anything that could help me or give me ideas.
    juan

    Juan - HTML items with the disabled attribute are not POSTed with the form so your after-submit processes never see them. Try 'readonly="readonly"' instead. Others may be able to suggest how to also give those cells a greyed-out appearance.
    Scott

Maybe you are looking for