Using weblogic with HP m/c service guard
Hi,
We have installed weblogic 5.1 using the IP address of the service guard package which is different from either of the HP V class machines which our package runs on.When we start weblogic we get a license problem as weblogic is picking up the IP address of the current node which hosts the package. We need it to pick up the service guard IP address.Any suggestions ?
Thanks in advance
pavan
Hi,
This is a problem I also ran into. The only solution I recieved from Bea
Support up to now, is that I would have to convert the license into a
license containing the IP-Adresses of the clustred maschines. This again
opens a lot of new questions about licensing Bea WLS.
This is not a very desirable solution.
Yours,
Michael Strauß
pavan kumar wrote:
>
Hi,
We have installed weblogic 5.1 using the IP address of the service guard package which is different from either of the HP V class machines which our package runs on.When we start weblogic we get a license problem as weblogic is picking up the IP address of the current node which hosts the package. We need it to pick up the service guard IP address.Any suggestions ?
Thanks in advance
pavan
Similar Messages
-
Error while attempting to use WebLogic with EDS
Hello,Previously, I have installed EDS and used the default TomCat (which I would prefer was not automatically installed).Now I want to stop using TomCat and start using WebLogic 8.x . I've gone through the docuemented steps to create the application in WebLogic, but when I attempt to access the URL for WebLogic, I recieve the following Java error:javax.servlet.ServletException: Cannot initialize essbase deployment server framework. at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)I realize this is a generic error, but is there any documentation on this?
I encountered the similar error before.I replaced Tomcat with WebSphere and DB2 with MySql.After I installed the EDS according to the EDS install guide file and started it,there were a lot of error happened.I don't know whether the cause of your error is same as mine.But I can tell you that there are some errors and missings in the EDS install guide pdf file.You should get help from the WebLogic expert if you really don't familiar with WebLogic
-
Error testing webservice using ESB with Oracle apps adapter services
When creating a simple ESB project with Oracle Applications adapter service, i get the following error when testing the webservice via EM.
SOA suite 10.1.3.3
oracle EBS 11.5.10
Any pointer on how to fix this is very much appreciated.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:ESBMessageProcessingFailed</faultcode><detail><EventName>DefaultSystem.GetOrderRS.executeprocedure</EventName><Cause>An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/LoadCustomer_orappdorders/orappd11i.wsdl [ orappd11i_ptt::orappd11i(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'orappd11i' failed due to: Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec due to: Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec
Please verify the spelling of the property.
; nested exception is:
ORABPEL-12532
Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec
Please verify the spelling of the property.
; nested exception is:
org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate InteractionSpec oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec due to: Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec
Please verify the spelling of the property.
; nested exception is:
ORABPEL-12532
Error while setting JCA WSDL Property.
Property setIRepInternalName is not defined for oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpecFix is as pointed in Error reported during AP Invoice concurrent program.
-
Use OWB with java or web service
Instead of using Oracle warehouse builder GUI design and control center, may I use Java or Web services to access the functionality of warehouse builder.
where can I find these Java or web services API document.
ThanksI think I can answser my own question by some investigation now. Javadoc is here:
http://download-west.oracle.com/docs/html/B12155_01/index.html
but looks like this never been metioned. does it means code to Java API is not recommanded?
also, still not able to find any tutorial about using this APIs except javadoc -
Hi,
This is a problem I also ran into. The only solution I recieved from Bea
Support up to now, is that I would have to convert the license into a
license containing the IP-Adresses of the clustred maschines. This again
opens a lot of new questions about licensing Bea WLS.
This is not a very desirable solution.
Yours,
Michael Strauß
pavan kumar wrote:
>
Hi,
We have installed weblogic 5.1 using the IP address of the service guard package which is different from either of the HP V class machines which our package runs on.When we start weblogic we get a license problem as weblogic is picking up the IP address of the current node which hosts the package. We need it to pick up the service guard IP address.Any suggestions ?
Thanks in advance
pavan -
HI ,
Can any body please suggest me any website (post some links) where I can get some good knowledge on
using Weblogic with Flex (we are not using data services).
I googled a lot but could not find anything realy good.
Thanks
NashPlease don't double post. If you're not using data services, then the only
thing that you need to know is where Web logic webroot is located, which
should be pretty clear in that web server documentation. -
WebLogic Server 6.0sp2 Windows Service Failures
I am trying to run WebLogic (with SSL) as a service instead of a task. The installNTService
cmd script runs ok but when the service is started it fails without any error
messages. The service runs for about 5 seconds. I cannot find any error messages
in the log. Any ideas of where to start looking?
Thanks,
DebIt looks like you are mixing SP1 and SP4 components in the server classpath.
Leaving aside the issue of supporting WL 6.1 ( nearly 10 years old! ), you should look at the classpath which will be listed in the server's log file when it starts up.
If this error has just recently started, has there been a modification to the startup scripts, or has there been a new patch installed? -
Using WebLogic in HPUX-Cluster with MC Service Guard
Hi
I have the following problem:
Bea WLS is installed on a shared device with MC Service Guard
Integration. This Package has a distinct IP Address to which the License
File is pointing.
This IP Address belongs also to the maschine the shared device is
attached to.
When I start WebLogic it always uses the IP-Address belonging to the
maschine the shared device is mounted on rather than the one the package
has. This behavior leads to a license exception.
Is there a solution for using MC ServiceGuard IPs or do I have to
convert my license ?
Yours,
Michael Strauß
[strauss.vcf]We're running BEA Weblogic in a HP-UX cluster over here, and it works without any
problems.
Bart
"Narendra Ravi" <[email protected]> wrote:
>
Hi,
Did you find if it is possible to run BEA WLS on a UNIX cluster?
Thanks,
Michael =?iso-8859-1?Q?Strau=DF?= <[email protected]> wrote:
Hi
I have the following problem:
Bea WLS is installed on a shared device with MC Service Guard
Integration. This Package has a distinct IP Address to which the License
File is pointing.
This IP Address belongs also to the maschine the shared device is
attached to.
When I start WebLogic it always uses the IP-Address belonging to the
maschine the shared device is mounted on rather than the one the package
has. This behavior leads to a license exception.
Is there a solution for using MC ServiceGuard IPs or do I have to
convert my license ?
Yours,
Michael Strauß
Content-Description: Card for Michael Strauß
begin:vcard
n:Strauß;Michael
tel;work:069-29985-183
x-mozilla-html:FALSE
url:http://www.santander.de
org:Santander Direkt Bank ;Anwendungsentwicklung Anlagen
adr:;;Gräfstraße 97;Frankfurt;;60282;Germany
version:2.1
email;internet:[email protected]
fn:Michael Strauß
end:vcard -
Web services with Jdeveloper using weblogic as server
Hi,
I try to test creating PL/SQL web services by using a connection hosted by weblogic server instead of OC4J. The problem is what I try to publish a package of the database in the second stage when it asks for the connection to use, in the list I don't found the connection I create to weblogic . It presents as choice only connections used the server OC4J.
I do not Know if it is possible to publish a package as web service by using weblogic server connection, and how to do it.
can anyone help me please .
NawalWeb services can only be published to BEA if you install Apache SOAP on BEA and use the Apache SOAP option of JDeveloper. The J2EE Web Services implementation framework is specific to Oracle9iAS.
The PL/SQL Web Services server implementation is based on the J2EE Web Services option and as a result is not really portable to BEA.
To publish a PL/SQL Web service on BEA with JDeveloper you would have to write the Java wrapper code to invoke the stored procedure using standard JDBC and then publish that Java class as a Web service using Apache SOAP. Then if you had Apache SOAP installed on BEA you would be set.
Portability of Web services implementations is a big feature coming with JAX-RPC - currently what most vendors have is interoperability between implementations because of things like SOAPBuilders and WS-I. When JAX-RPC becomes part of J2EE 1.4 roughly in June and vendors start putting out implementations on it you should get closer to portability.
In the meantime, the easiest way to get portability is to use the same SOAP server on both servers - Apache SOAP is a good example.
Hope this helps.
Mike -
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
Using EJB with Hibernate on Weblogic Server ADF platform
Hi all,
We use Jdeveloper 11.1.1.4 and WLS 10.3
I tried to use Hibernate on my project according to this link well, EJB with Hibernate On Weblogic
I wanto use Hibernate tool because toplink and eclipselink can not achieve the issue about generating update* ddl on schema, they can just only re-create the tables -not real update.
Firstly i got the related jars from internet: http://www.2hotfile.com/di-LSBU.png
cglib-2.2
antlr-2.7.6
commons-collections-3.1
dom4j-1.6.1
hibernate3
hibernate-validator-4.1.0.Final
javassist-3.9.0.GA
jta-1.1
slf4j-api-1.5.11
slf4j-nop-1.5.11
Then i added to model project as library dependencies: http://www.2hotfile.com/di-GMSZ.png
configured persistence.xml as below:
<?xml version="1.0" encoding="windows-1252" ?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_2_0.xsd"
version="1.0">
<persistence-unit name="VakkoEJBModel" transaction-type="RESOURCE_LOCAL">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>jdbc/VakkoDS</jta-data-source>
<properties>
<property name="hibernate.jndi.url" value="t3://127.0.0.1:7001" />
<property name="hibernate.connection.datasource" value="jdbc/VakkoDS" />
<property name="hibernate.transaction.manager_lookup_class" value="org.hibernate.transaction.WeblogicTransactionManagerLookup" />
<property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect" />
<property name="hibernate.hbm2ddl.auto" value="update" />
<property name="hibernate.current_session_context_class" value="jta" />
</properties>
</persistence-unit>
</persistence>
weblogic-application.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<weblogic-application>
<prefer-application-packages>
<package-name>antlr.*</package-name>
<package-name>org.hibernate.*</package-name>
<!-- package-name>org.apache.commons.logging.*</package-name -->
<!-- package-name>org.w3c.dom.*</package-name -->
</prefer-application-packages>
</weblogic-application>
weblogic-ejb-jar.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<weblogic-ejb-jar xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-ejb-jar http://www.bea.com/ns/weblogic/weblogic-ejb-jar/1.0/weblogic-ejb-jar.xsd"
xmlns="http://www.bea.com/ns/weblogic/weblogic-ejb-jar">
</weblogic-ejb-jar>
ejb-jar.xml
<?xml version="1.0" encoding="windows-1252" ?>
<ejb-jar/>
And i added to setDomainEnv.cmd that line:
set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
deployment profile could be seen by clicking those links:
http://www.2hotfile.com/di-XV68.png
http://www.2hotfile.com/di-8YC9.png
http://www.2hotfile.com/di-ADR4.png
And i tried to manipulate the ear file contents according to these informations: http://middlewaremagic.com/weblogic/wp-content/uploads/2010/06/EAR_Application_Diagram.jpg
under ear\META-INF\application.xml
<?xml version = '1.0' encoding = 'windows-1252'?>
<application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/application_5.xsd" version="5" xmlns="http://java.sun.com/xml/ns/javaee">
<display-name>ejb1</display-name>
<module>
<ejb>ejb1.jar</ejb>
</module>
</application>
under ear\META-INF\weblogic-application.xml
<?xml version = '1.0' encoding = 'windows-1254'?>
<weblogic-application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/weblogic-application http://www.bea.com/ns/weblogic/weblogic-application/1.0/weblogic-application.xsd" xmlns="http://www.bea.com/ns/weblogic/weblogic-application">
<prefer-application-packages>
<package-name>org.hibernate.*</package-name>
<package-name>antlr.*</package-name>
<!-- package-name>org.apache.commons.logging.*</package-name -->
<!-- package-name>org.w3c.dom.*</package-name -->
</prefer-application-packages>
<listener>
<listener-class>oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener</listener-class>
</listener>
<listener>
<listener-class>oracle.mds.lcm.weblogic.WLLifecycleListener</listener-class>
</listener>
<library-ref>
<library-name>adf.oracle.domain</library-name>
</library-ref>
</weblogic-application>
The files which existed in ejb1.ear\ejb1.jar\META-INF\ directory same with source folder of model project (these were created by jdeveloper deployment process according to deployment profile which previously explaint)
ear contents shown that link : http://www.2hotfile.com/di-23X6.png
When i deploy the project to weblogic by using JDeveloper or http://127.0.0.1:7101/console/ method. But occured exception
<10-Dec-2012 16:31:54 o'clock EET> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=AppDeploymentsControlPage.>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1355149965087' for task '2'. Error is: 'weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'ejb1'.>
<10-Dec-2012 16:32:45 o'clock EET> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
Truncated. see log file for complete stacktrace
Caused By: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
Truncated. see log file for complete stacktrace
>
<10-Dec-2012 16:32:45 o'clock EET> <Error> <Console> <BEA-240003> <Console encountered the following error weblogic.application.ModuleException: Exception preparing module: EJBModule(ejb1.jar)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:469)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused by: weblogic.deployment.EnvironmentException: Error processing persistence unit VakkoEJBModel of module ejb1.jar: Error instantiating the Persistence Provider class org.hibernate.ejb.HibernatePersistence of the PersistenceUnit VakkoEJBModel: java.lang.ClassNotFoundException: org.hibernate.ejb.HibernatePersistence
at weblogic.deployment.BasePersistenceUnitInfoImpl.getPersistenceProvider(BasePersistenceUnitInfoImpl.java:375)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:393)
at weblogic.deployment.BasePersistenceUnitInfoImpl.initializeEntityManagerFactory(BasePersistenceUnitInfoImpl.java:386)
at weblogic.deployment.BasePersistenceUnitInfoImpl.<init>(BasePersistenceUnitInfoImpl.java:158)
at weblogic.deployment.PersistenceUnitInfoImpl.<init>(PersistenceUnitInfoImpl.java:39)
at weblogic.deployment.AbstractPersistenceUnitRegistry.storeDescriptors(AbstractPersistenceUnitRegistry.java:349)
at weblogic.deployment.AbstractPersistenceUnitRegistry.loadPersistenceDescriptor(AbstractPersistenceUnitRegistry.java:263)
at weblogic.deployment.ModulePersistenceUnitRegistry.<init>(ModulePersistenceUnitRegistry.java:69)
at weblogic.ejb.container.deployer.EJBModule.setupPersistenceUnitRegistry(EJBModule.java:223)
at weblogic.ejb.container.deployer.EJBModule$1.execute(EJBModule.java:324)
at weblogic.deployment.PersistenceUnitRegistryInitializer.setupPersistenceUnitRegistries(PersistenceUnitRegistryInitializer.java:62)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:393)
What are my mistake/s or incompletes?
Please help me and excuse my poor English. Thanks in advanceThanks again for your consideration.
I double checked CLASSPATH. And seen starting wls with classpath which i defined, but no change about ecxeption.
you can see wls starting classpath through the link: http://www.2hotfile.com/image.php?di=BQNE
setDomainEnv.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
@REM *************************************************************************
@REM This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
@REM
@REM This script initializes the following variables before calling commEnv to set other variables:
@REM
@REM WL_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
@REM this script to switch between Sun or BEA or just have the default be set.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server. Depends directly on which JAVA_VM value is set by default or by the environment.
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DOMAIN_PRODUCTION_MODE
@REM - The variable that determines whether the workshop related settings like the debugger,
@REM testconsole or iterativedev should be enabled. ONLY settable using the
@REM command-line parameter named production
@REM NOTE: Specifying the production command-line param will force
@REM the server to start in production mode.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
set COMMON_COMPONENTS_HOME=C:\Oracle\Middleware_11.1.1.4\oracle_common
for %%i in ("%COMMON_COMPONENTS_HOME%") do set COMMON_COMPONENTS_HOME=%%~fsi
@REM C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
set CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;%CLASSPATH%;
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set PORTLET_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WC_ORACLE_HOME=C:\Oracle\Middleware_11.1.1.4\jdeveloper
set WL_HOME=C:\Oracle\Middleware_11.1.1.4\wlserver_10.3
for %%i in ("%WL_HOME%") do set WL_HOME=%%~fsi
set BEA_JAVA_HOME=
set SUN_JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
if "%JAVA_VENDOR%"=="Oracle" (
set JAVA_HOME=%BEA_JAVA_HOME%
) else (
if "%JAVA_VENDOR%"=="Sun" (
set JAVA_HOME=%SUN_JAVA_HOME%
) else (
set JAVA_VENDOR=Sun
set JAVA_HOME=C:\Program Files\Java\jdk1.6.0_30x64
@REM set JAVA_HOME=C:\Oracle\Middleware_11.1.1.4\jdk160_21
@REM We need to reset the value of JAVA_HOME to get it shortened AND
@REM we can not shorten it above because immediate variable expansion will blank it
set JAVA_HOME=%JAVA_HOME%
for %%i in ("%JAVA_HOME%") do set JAVA_HOME=%%~fsi
set SAMPLES_HOME=%WL_HOME%\samples
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
set LONG_DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
if "%DEBUG_PORT%"=="" (
set DEBUG_PORT=8453
if "%SERVER_NAME%"=="" (
set SERVER_NAME=DefaultServer
set DERBY_FLAG=false
set enableHotswapFlag=
set PRODUCTION_MODE=
set doExitFlag=false
set verboseLoggingFlag=false
for %%p in (%*) do call :SET_PARAM %%p
GOTO :CMD_LINE_DONE
:SET_PARAM
for %%q in (%1) do set noQuotesParam=%%~q
if /i "%noQuotesParam%" == "nodebug" (
set debugFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "production" (
set DOMAIN_PRODUCTION_MODE=true
GOTO :EOF
if /i "%noQuotesParam%" == "notestconsole" (
set testConsoleFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noiterativedev" (
set iterativeDevFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noLogErrorsToConsole" (
set logErrorsToConsoleFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "noderby" (
set DERBY_FLAG=false
GOTO :EOF
if /i "%noQuotesParam%" == "doExit" (
set doExitFlag=true
GOTO :EOF
if /i "%noQuotesParam%" == "noExit" (
set doExitFlag=false
GOTO :EOF
if /i "%noQuotesParam%" == "verbose" (
set verboseLoggingFlag=true
GOTO :EOF
if /i "%noQuotesParam%" == "enableHotswap" (
set enableHotswapFlag=-javaagent:%WL_HOME%\server\lib\diagnostics-agent.jar
GOTO :EOF
) else (
set PROXY_SETTINGS=%PROXY_SETTINGS% %1
GOTO :EOF
:CMD_LINE_DONE
set MEM_DEV_ARGS=
if "%DOMAIN_PRODUCTION_MODE%"=="true" (
set PRODUCTION_MODE=%DOMAIN_PRODUCTION_MODE%
if "%PRODUCTION_MODE%"=="true" (
set debugFlag=false
set testConsoleFlag=false
set iterativeDevFlag=false
set logErrorsToConsoleFlag=false
@REM If you want to override the default Patch Classpath, Library Path and Path for this domain,
@REM Please uncomment the following lines and add a valid value for the environment variables
@REM set PATCH_CLASSPATH=[myPatchClasspath] (windows)
@REM set PATCH_LIBPATH=[myPatchLibpath] (windows)
@REM set PATCH_PATH=[myPatchPath] (windows)
@REM PATCH_CLASSPATH=[myPatchClasspath] (unix)
@REM PATCH_LIBPATH=[myPatchLibpath] (unix)
@REM PATCH_PATH=[myPatchPath] (unix)
call "%WL_HOME%\common\bin\commEnv.cmd"
set WLS_HOME=%WL_HOME%\server
set XMS_SUN_64BIT=256
set XMS_SUN_32BIT=256
set XMX_SUN_64BIT=512
set XMX_SUN_32BIT=512
set XMS_JROCKIT_64BIT=256
set XMS_JROCKIT_32BIT=256
set XMX_JROCKIT_64BIT=512
set XMX_JROCKIT_32BIT=512
if "%JAVA_VENDOR%"=="Sun" (
set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
echo this is suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuun
) else (
set WLS_MEM_ARGS_64BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
set WLS_MEM_ARGS_32BIT=-Xms256m -Xmx600m -XX:PermSize=128M -XX:MaxPermSize=256M
echo this is noooooooooooooooooooooooooooooooooooooooooooooooot sun
if "%JAVA_VENDOR%"=="Oracle" (
set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_JROCKIT_64BIT%m -Xmx%XMX_JROCKIT_64BIT%m
set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_JROCKIT_32BIT%m -Xmx%XMX_JROCKIT_32BIT%m
) else (
set CUSTOM_MEM_ARGS_64BIT=-Xms%XMS_SUN_64BIT%m -Xmx%XMX_SUN_64BIT%m
set CUSTOM_MEM_ARGS_32BIT=-Xms%XMS_SUN_32BIT%m -Xmx%XMX_SUN_32BIT%m
set MEM_ARGS_64BIT=%CUSTOM_MEM_ARGS_64BIT%
set MEM_ARGS_32BIT=%CUSTOM_MEM_ARGS_32BIT%
if "%JAVA_USE_64BIT%"=="true" (
set MEM_ARGS=%MEM_ARGS_64BIT%
) else (
set MEM_ARGS=%MEM_ARGS_32BIT%
set MEM_PERM_SIZE_64BIT=-XX:PermSize=128m
set MEM_PERM_SIZE_32BIT=-XX:PermSize=128m
if "%JAVA_USE_64BIT%"=="true" (
set MEM_PERM_SIZE=%MEM_PERM_SIZE_64BIT%
) else (
set MEM_PERM_SIZE=%MEM_PERM_SIZE_32BIT%
set MEM_MAX_PERM_SIZE_64BIT=-XX:MaxPermSize=512m
set MEM_MAX_PERM_SIZE_32BIT=-XX:MaxPermSize=512m
if "%JAVA_USE_64BIT%"=="true" (
set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_64BIT%
) else (
set MEM_MAX_PERM_SIZE=%MEM_MAX_PERM_SIZE_32BIT%
if "%JAVA_VENDOR%"=="Sun" (
if "%PRODUCTION_MODE%"=="" (
set MEM_DEV_ARGS=-XX:CompileThreshold=8000 %MEM_PERM_SIZE%
@REM Had to have a separate test here BECAUSE of immediate variable expansion on windows
if "%JAVA_VENDOR%"=="Sun" (
set MEM_ARGS=%MEM_ARGS% %MEM_DEV_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="HP" (
set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
if "%JAVA_VENDOR%"=="Apple" (
set MEM_ARGS=%MEM_ARGS% %MEM_MAX_PERM_SIZE%
@REM IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
set USER_MEM_ARGS=-Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
if NOT "%USER_MEM_ARGS%"=="" (
set MEM_ARGS=%USER_MEM_ARGS%
set ORACLE_DOMAIN_CONFIG_DIR=%DOMAIN_HOME%\config\fmwconfig
for %%i in ("%ORACLE_DOMAIN_CONFIG_DIR%") do set ORACLE_DOMAIN_CONFIG_DIR=%%~fsi
set WLS_JDBC_REMOTE_ENABLED=-Dweblogic.jdbc.remoteEnabled=false
if "%WC_OHOME_ARGUMENT%"=="" (
set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%PORTLET_OHOME_ARGUMENT%"=="" (
set PORTLET_OHOME_ARGUMENT=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dportlet.oracle.home=%PORTLET_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
if "%WC_OHOME_ARGUMENT%"=="" (
set WC_OHOME_ARGUMENT=-Dwc.oracle.home=%WC_ORACLE_HOME%
set EXTRA_JAVA_PROPERTIES=-Dwc.oracle.home=%WC_ORACLE_HOME% %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=-Dplatform.home=%WL_HOME% -Dwls.home=%WLS_HOME% -Dweblogic.home=%WLS_HOME%
set ALT_TYPES_DIR=%COMMON_COMPONENTS_HOME%\modules\oracle.ossoiap_11.1.1,%COMMON_COMPONENTS_HOME%\modules\oracle.oamprovider_11.1.1
set PROTOCOL_HANDLERS=oracle.mds.net.protocol
if "%JAVA_VENDOR%"=="Sun" (
set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
) else (
if "%JAVA_VENDOR%"=="Oracle" (
set EXTRA_JAVA_PROPERTIES=-Djrockit.codegen.newlockmatching=true %EXTRA_JAVA_PROPERTIES%
) else (
set EXTRA_JAVA_PROPERTIES=-XX:+UseParallelGC -XX:+DisableExplicitGC %EXTRA_JAVA_PROPERTIES%
set PROTOCOL_HANDLERS=%PROTOCOL_HANDLERS:;="|"%
@REM To use Java Authorization Contract for Containers (JACC) in this domain,
@REM please uncomment the following section. If there are multiple machines in
@REM your domain, be sure to edit the setDomainEnv in the associated domain on
@REM each machine.
@REM
@REM -Djava.security.manager
@REM -Djava.security.policy=location of weblogic.policy
@REM -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
@REM -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
@REM -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.tagging.scopeTags=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Doracle.webcenter.analytics.disable-native-partitioning=false %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-DUSE_JAAS=false -Djps.policystore.hybrid.mode=false -Djps.combiner.optimize.lazyeval=true -Djps.combiner.optimize=true -Djps.auth=ACC -Doracle.core.ojdl.logging.usercontextprovider=oracle.core.ojdl.logging.impl.UserContextImpl -noverify %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dwsm.repository.path=%DOMAIN_HOME%\oracle\store\gmds %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Dcommon.components.home=%COMMON_COMPONENTS_HOME% -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=%DOMAIN_HOME% -Djrockit.optfile=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=%ORACLE_DOMAIN_CONFIG_DIR%\servers\%SERVER_NAME% -Doracle.domain.config.dir=%ORACLE_DOMAIN_CONFIG_DIR% -Digf.arisidbeans.carmlloc=%ORACLE_DOMAIN_CONFIG_DIR%\carml -Digf.arisidstack.home=%ORACLE_DOMAIN_CONFIG_DIR%\arisidprovider -Doracle.security.jps.config=%DOMAIN_HOME%\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=%DOMAIN_HOME%\servers\%SERVER_NAME%\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=%ALT_TYPES_DIR% -Djava.protocol.handler.pkgs=%PROTOCOL_HANDLERS% %WLS_JDBC_REMOTE_ENABLED% %EXTRA_JAVA_PROPERTIES%
set EXTRA_JAVA_PROPERTIES=-Djps.app.credential.overwrite.allowed=true %EXTRA_JAVA_PROPERTIES%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %EXTRA_JAVA_PROPERTIES%
set ARDIR=%WL_HOME%\server\lib
pushd %LONG_DOMAIN_HOME%
@REM Clustering support (edit for your cluster!)
if "%ADMIN_URL%"=="" (
@REM The then part of this block is telling us we are either starting an admin server OR we are non-clustered
set CLUSTER_PROPERTIES=-Dweblogic.management.discover=true
) else (
set CLUSTER_PROPERTIES=-Dweblogic.management.discover=false -Dweblogic.management.server=%ADMIN_URL%
if NOT "%LOG4J_CONFIG_FILE%"=="" (
set JAVA_PROPERTIES=%JAVA_PROPERTIES% -Dlog4j.configuration=file:%LOG4J_CONFIG_FILE%
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %CLUSTER_PROPERTIES%
set JAVA_DEBUG=
if "%debugFlag%"=="true" (
set JAVA_DEBUG=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=%DEBUG_PORT%,server=y,suspend=n -Djava.compiler=NONE
set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole...
) else (
set JAVA_OPTIONS=%JAVA_OPTIONS% %enableHotswapFlag% -da
if NOT exist %JAVA_HOME%\lib (
echo The JRE was not found in directory %JAVA_HOME%. ^(JAVA_HOME^)
echo Please edit your environment and set the JAVA_HOME
echo variable to point to the root directory of your Java installation.
popd
pause
GOTO :EOF
if "%DERBY_FLAG%"=="true" (
set DATABASE_CLASSPATH=%DERBY_CLASSPATH%
) else (
set DATABASE_CLASSPATH=%DERBY_CLIENT_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar;%POST_CLASSPATH%
) else (
set POST_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jrf_11.1.1\jrf.jar
if NOT "%PRE_CLASSPATH%"=="" (
set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;%PRE_CLASSPATH%
) else (
set PRE_CLASSPATH=%COMMON_COMPONENTS_HOME%\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar
if "%PORTLET_ORACLE_HOME%"=="" (
set POST_CLASSPATH=%WC_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar;%POST_CLASSPATH%
) else (
set POST_CLASSPATH=C:\Oracle\Middleware_11.1.1.4\jdeveloper\webcenter\modules\wcps_11.1.1.4.0\wcps-connection-mbeans.jar
set POST_CLASSPATH=%PORTLET_ORACLE_HOME%\webcenter\modules\oracle.portlet.server_11.1.1\oracle-portlet-api.jar;%POST_CLASSPATH%
set POST_CLASSPATH=%DOMAIN_HOME%\wcps-lib\derby-10.6.1.0.jar;%DOMAIN_HOME%\wcps-lib\derbytools-10.6.1.0.jar;%POST_CLASSPATH%
if NOT "%DATABASE_CLASSPATH%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%DATABASE_CLASSPATH%
) else (
set POST_CLASSPATH=%DATABASE_CLASSPATH%
if NOT "%ARDIR%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%ARDIR%\xqrl.jar
) else (
set POST_CLASSPATH=%ARDIR%\xqrl.jar
@REM PROFILING SUPPORT
set JAVA_PROFILE=
set SERVER_CLASS=weblogic.Server
set JAVA_PROPERTIES=%JAVA_PROPERTIES% %WLP_JAVA_PROPERTIES%
set JAVA_OPTIONS=%JAVA_OPTIONS% %JAVA_PROPERTIES% -Dwlw.iterativeDev=%iterativeDevFlag% -Dwlw.testConsole=%testConsoleFlag% -Dwlw.logErrorsToConsole=%logErrorsToConsoleFlag%
if "%PRODUCTION_MODE%"=="true" (
set JAVA_OPTIONS= -Dweblogic.ProductionModeEnabled=true %JAVA_OPTIONS%
@REM -- Setup properties so that we can save stdout and stderr to files
if NOT "%WLS_STDOUT_LOG%"=="" (
echo Logging WLS stdout to %WLS_STDOUT_LOG%
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stdout=%WLS_STDOUT_LOG%
if NOT "%WLS_STDERR_LOG%"=="" (
echo Logging WLS stderr to %WLS_STDERR_LOG%
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.Stderr=%WLS_STDERR_LOG%
@REM ADD EXTENSIONS TO CLASSPATHS
@REM set EXT_PRE_CLASSPATH=C:\jarlar\hibernate-3.3.2\antlr-2.7.6.jar;C:\jarlar\hibernate-3.3.2\commons-collections-3.1.jar;C:\jarlar\hibernate-3.3.2\dom4j-1.6.1.jar;C:\jarlar\hibernate-3.3.2\hibernate3.jar;C:\jarlar\hibernate-3.3.2\javassist-3.9.0.GA.jar;C:\jarlar\hibernate-3.3.2\jta-1.1.jar;C:\jarlar\hibernate-3.3.2\slf4j-api-1.5.11.jar;C:\jarlar\hibernate-3.3.2\slf4j-nop-1.5.11.jar;C:\jarlar\hibernate-3.3.2\bytecode\cglib\cglib-2.2.jar;C:\Oracle\Middleware_11.1.1.4\modules\ejb3-persistence-3.3.1.jar;hibernate-validator-4.1.0.Final.jar;
if NOT "%EXT_PRE_CLASSPATH%"=="" (
if NOT "%PRE_CLASSPATH%"=="" (
set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%;%PRE_CLASSPATH%
) else (
set PRE_CLASSPATH=%EXT_PRE_CLASSPATH%
if NOT "%EXT_POST_CLASSPATH%"=="" (
if NOT "%POST_CLASSPATH%"=="" (
set POST_CLASSPATH=%POST_CLASSPATH%;%EXT_POST_CLASSPATH%
) else (
set POST_CLASSPATH=%EXT_POST_CLASSPATH%
if NOT "%WEBLOGIC_EXTENSION_DIRS%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.ext.dirs=%WEBLOGIC_EXTENSION_DIRS%
set JAVA_OPTIONS=%JAVA_OPTIONS%
@REM SET THE CLASSPATH
if NOT "%WLP_POST_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%WLP_POST_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%WLP_POST_CLASSPATH%
if NOT "%POST_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%POST_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%POST_CLASSPATH%
if NOT "%WEBLOGIC_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
) else (
set CLASSPATH=%WEBLOGIC_CLASSPATH%
if NOT "%PRE_CLASSPATH%"=="" (
set CLASSPATH=%PRE_CLASSPATH%;%CLASSPATH%
if NOT "%JAVA_VENDOR%"=="BEA" (
set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
) else (
set JAVA_VM=%JAVA_VM% %JAVA_DEBUG% %JAVA_PROFILE%
startWebLogic.cmd
@ECHO OFF
@REM WARNING: This file is created by the Configuration Wizard.
@REM Any changes to this script may be lost when adding extensions to this configuration.
SETLOCAL
@REM --- Start Functions ---
@REM set JAVA_OPTIONS=-javaagent:C:\jarlar\jrebel\jrebel.jar %JAVA_OPTIONS%
@REM set CLASS_CACHE=false
GOTO :ENDFUNCTIONS
:stopAll
@REM We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if NOT "X%ALREADY_STOPPED%"=="X" (
GOTO :EOF
@REM STOP DERBY (only if we started it)
if "%DERBY_FLAG%"=="true" (
echo Stopping Derby server...
call "%WL_HOME%\common\derby\bin\stopNetworkServer.cmd" >"%DOMAIN_HOME%\derbyShutdown.log" 2>&1
echo Derby server stopped.
set ALREADY_STOPPED=true
GOTO :EOF
:classCaching
echo Class caching enabled...
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dlaunch.main.class=%SERVER_CLASS% -Dlaunch.class.path="%CLASSPATH%" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp %WL_HOME%\server\lib\pcl2.jar
set SERVER_CLASS=com.oracle.classloader.launch.Launcher
GOTO :EOF
:ENDFUNCTIONS
@REM --- End Functions ---
@REM *************************************************************************
@REM This script is used to start WebLogic Server for this domain.
@REM
@REM To create your own start script for your domain, you can initialize the
@REM environment by calling @USERDOMAINHOME\setDomainEnv.
@REM
@REM setDomainEnv initializes or calls commEnv to initialize the following variables:
@REM
@REM BEA_HOME - The BEA home directory of your WebLogic installation.
@REM JAVA_HOME - Location of the version of Java used to start WebLogic
@REM Server.
@REM JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
@REM PATH - JDK and WebLogic directories are added to system path.
@REM WEBLOGIC_CLASSPATH
@REM - Classpath needed to start WebLogic Server.
@REM PATCH_CLASSPATH - Classpath used for patches
@REM PATCH_LIBPATH - Library path used for patches
@REM PATCH_PATH - Path used for patches
@REM WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
@REM JAVA_VM - The java arg specifying the VM to run. (i.e.
@REM - server, -hotspot, etc.)
@REM USER_MEM_ARGS - The variable to override the standard memory arguments
@REM passed to java.
@REM PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
@REM DERBY_HOME - Derby home directory.
@REM DERBY_CLASSPATH
@REM - Classpath needed to start Derby.
@REM
@REM Other variables used in this script include:
@REM SERVER_NAME - Name of the weblogic server.
@REM JAVA_OPTIONS - Java command-line options for running the server. (These
@REM will be tagged on to the end of the JAVA_VM and
@REM MEM_ARGS)
@REM CLASS_CACHE - Enable class caching of system classpath.
@REM
@REM For additional information, refer to "Managing Server Startup and Shutdown for Oracle WebLogic Server"
@REM (http://download.oracle.com/docs/cd/E17904_01/web.1111/e13708/overview.htm).
@REM *************************************************************************
@REM Call setDomainEnv here.
set DOMAIN_HOME=C:\Users\Dijitaluser\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain
for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
set SAVE_CLASSPATH=%CLASSPATH%
@REM Start Derby
set DERBY_DEBUG_LEVEL=0
if "%DERBY_FLAG%"=="true" (
call "%WL_HOME%\common\derby\bin\startNetworkServer.cmd" >"%DOMAIN_HOME%\derby.log" 2>&1
set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS%
set SAVE_JAVA_OPTIONS=
set CLASSPATH=%SAVE_CLASSPATH%
set SAVE_CLASSPATH=
if "%PRODUCTION_MODE%"=="true" (
set WLS_DISPLAY_MODE=Production
) else (
set WLS_DISPLAY_MODE=Development
if NOT "%WLS_USER%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.username=%WLS_USER%
if NOT "%WLS_PW%"=="" (
set JAVA_OPTIONS=%JAVA_OPTIONS% -Dweblogic.management.password=%WLS_PW%
if NOT "%MEDREC_WEBLOGIC_CLASSPATH%"=="" (
if NOT "%CLASSPATH%"=="" (
set CLASSPATH=%CLASSPATH%;%MEDREC_WEBLOGIC_CLASSPATH%
) else (
set CLASSPATH=%MEDREC_WEBLOGIC_CLASSPATH%
echo .
echo .
echo JAVA Memory arguments: %MEM_ARGS%
echo .
echo WLS Start Mode=%WLS_DISPLAY_MODE%
echo .
echo CLASSPATH=%CLASSPATH%
echo .
echo PATH=%PATH%
echo .
echo ***************************************************
echo * To start WebLogic Server, use a username and *
echo * password assigned to an admin-level user. For *
echo * server administration, use the WebLogic Server *
echo * console at http:\\hostname:port\console *
echo ***************************************************
@REM CLASS CACHING
if "%CLASS_CACHE%"=="true" (
CALL :classCaching
@REM START WEBLOGIC
echo starting weblogic with Java version:
%JAVA_HOME%\bin\java %JAVA_VM% -version
if "%WLS_REDIRECT_LOG%"=="" (
echo Starting WLS with line:
echo %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
) else (
echo Redirecting output from WLS window to %WLS_REDIRECT_LOG%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS% >"%WLS_REDIRECT_LOG%" 2>&1
CALL :stopAll
popd
@REM Exit this script only if we have been told to exit.
if "%doExitFlag%"=="true" (
exit
ENDLOCAL
Edited by: webyildirim on 11.Ara.2012 02:38 -
Listener configuration with service guard
Hello
We plan to work here with HP service guard on a cluster (oracle version 7.3 and hp UX 11). We want to distribute databases accross the nodes of the cluster and let them protected by service guard.
Here's my main question.
I have a cluster with two nodes (A and B) and service guard but without OPS. Instance InstA is running on A protected by service guard. Instance InstB is running on B protected by service guard. I I use TNSNAMES.ora with the adresses of the packages guarding my instances.
If, after a problem, service guard switches for example instA from A to B, what will happen with the listener ?
Will we have now two listeners running on node B ?
Or
will we have just one listener ?
In this later case, the listener running on B should be ready to accept connexions to instB but also to instA when instA is moved to B.
Any hint is welcome.If anyone else comes across this problem and they are trying to get SSL connections to the oracle database working but it is failing with ‘cannot hand off connection’, then in my experience the problem is most likely to be because of a firewall configuration.
It turns out that in a non-SSL environment, Oracle can seamlessly hand off the connection to another port without dropping the connection on it’s own side, and therefore the ports open on the the firewall can remain constrained to the initial connection port (usually 1521). However, in an SSL environment Oracle needs to hand off the connection to a different port number, and because of the SSL handshake required, that port not only needs to be open on the firewall, Oracle needs to be told to use that port number explicitly which is done using the DISPATCHERS setting.
For example, for one dispatcher, that could be run on 24841 while the listener is run on 2484. In this case, set up the firewall with ports 2484 and 24841 open. Set up the listener for TCPS on port 2484. Then to set up the dispatcher, connect as sys (sysdba) to oracle and run
alter system set dispatchers=‘(ADDRESS=(PROTOCOL=TCPS)(HOST=myhost.domain.tld)(PORT=24841))(INDEX=1)’ scope=both;
The index=1 makes sure that you add this dispatcher in a new slot without clobbering your existing TCP listener (which will be in index=0). You will obviously
Good luck. TCPS is a pain in the posterior to get working. -
How to use authid with rwservlet via WebLogic Thin Client
1. Using J2EE Thin Client for WebLogic (WL) to submit interactive requests for Oracle Reports (App Server 10g) running on another server without SSO.
2. After starting basic Infrastructure, we start rwserver in batch mode (no other mid-tier components are used).
3. It appears that the cgicmd.dat file in the Thin Client conf directory on the WL server controls the DB access with the key:connect string info it has.
4. We had been allowing the testers to come in via the web through a SunOne (iPlanet/Netscape) web server instance, which in turn connects to the WL server running the Thin Client instance.
5. We noticed that anyone could run rwservlet to view report status with the showjobs command via a URL through the same mechanism as point #4 above, and were concerned about security of the reports - "bad".
6. Then someone realized the showmap command could also be specified, and thus see the DB connect string (Id/pw/SID) - "worse".
I researched securing Reports, and read through the white paper, "Securing Oracle9i Reports", and although it discusses security without using SSO, all it says is "users accessing a secured instance of Oracle9iAS Reports Services will be challenged to identify themselves by the Reports Servlet, using its own authentication mechanism (as with Reports6i)", but I can find no explanation of how that works, nor how it would work with the WL Thin Client.
Questions:
1. How are the Id's/passwords set up under AS 10g "as with Reports6i" in this environment going through the WL Thin Client?
2. Is there anything else that needs to be done to secure the created reports, and the connect string info (i.e. using authid with rwservlet?showjob, and not allowing the rwservlet?showmap to be executed at all)?
TIA,
ROCthe JDBC Developer's Guide (11gR2)
gives an example in chapter 9 under "JDBC Thin Driver Support for Encryption and Integrity", sub- "Setting Encryption and Integrity Parameters in Java"
from Oracle SQL Devloper, without redirecting the client to use the OCI/thick driver, choose, new database connection, connection type Advanced. add the entry from the example noted above to the Custom JDBC URL form.
for example:
Properties prop = new Properties();
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_LEVEL,"REQUIRED");
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_TYPES,"(AES128)");
OracleDataSource ods = new OracleDataSource(); ods.setProperties(prop); ods.setURL(jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=xxxx)(INSTANCE_NAME=xxxx))));
Connection conn = ods.getConnection();
strange side note!, we could not get this to encrypt unless the sqlnet.ora file included the SQLNET.ENCRYPTION_SERVER=required. if this was set to default(accepted), and even though the jdbc thin client properties set to required, the network traffic was still clear text.
good luck -
Programming Weblogic with jmx without using weblogic api?
Hi,
I want to know if it is possible to program weblogic management service without
using weblogic api but just rely on standard JMX interface and methods.
Currently, I am relying on weblogic api weblogic.jndi.Environment and weblogic.management.MBeanHome
interface to get the context and access the MBean Server subsystem. Can I find
the equivalent using jmx?
My code is as follows:
Environment env = new Environment();
env.setProviderUrl(url);
env.setSecurityPrincipal(username);
env.setSecurityCredentials(password);
Context ctx = env.getInitialContext();
MBeanHome home = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
String domain = home.getDomainName();
homeServer = home.getMBeanServer();
Thank you.Hi Ryan,
I have looked through the documentation.
It told me that I need to use weblogic.management.MBeanHome interface to get MBeanHome
and from there then I can only use jmx interface.
I presume it is not possible not to use weblogic.jar if I want to establish the
initial connection with Weblogic server?
Thanks.
ryan upton <[email protected]> wrote:
YongLeong wrote:
Hi,
I want to know if it is possible to program weblogic management servicewithout
using weblogic api but just rely on standard JMX interface and methods.
Currently, I am relying on weblogic api weblogic.jndi.Environment andweblogic.management.MBeanHome
interface to get the context and access the MBean Server subsystem.Can I find
the equivalent using jmx?
My code is as follows:
Environment env = new Environment();
env.setProviderUrl(url);
env.setSecurityPrincipal(username);
env.setSecurityCredentials(password);
Context ctx = env.getInitialContext();
MBeanHome home = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
String domain = home.getDomainName();
homeServer = home.getMBeanServer();
Thank you.I think you'll find your answer here:
http://edocs.bea.com/wls/docs81/jmx/index.html
HTH
~Ryan -
Hi,
I would like to know if anybody has used iFS with weblogic before. If so could you please share the information like how to make it work. I would like to know the classpath settings etc...
Any help will be greatly appreciated.while i don't work for Oracle, i would suggest this is not a supported configuration. ;)
having said that, it should be easy enough to accomplish. just make sure your classpath (better yet, your WAR or EAR file) includes the required runtime iFS jars (repos.jar, adk.jar, utils.jar and email.jar), and then use JDBC to get iFS service configuration information. (See my response to Satya in the "custom JSP in OC4J" thread.)
that should work just fine.
.rich
Maybe you are looking for
-
Unable to initialize video deck, (can not capture from camera)
Hello All, I am using a quad core G5 and am trying to capture some footage into Final Cut Pro version 5.0. I have two Panasonic DVX 100B mini DV cameras. I normally capture with a JVC BR-DV3000 mini DV deck but it is currently not working. So I'm try
-
As you can tell from the title of my post, I don't know much at all about itunes or apple products in general. I am in the market for an ipad2 and would like to download movies from itunes to the ipad2. However, I have been told that even the 64gb
-
Hi, Is it possible to have a service object checking permanently for events posted by other service objects? I have not been able to start this type of object. Thanks, Guillermo Turk To unsubscribe, email '[email protected]' with 'unsubscribe forte-u
-
Changing Appraiser Name in the Appraisal Document
Hi, I am able to change the appraiser name as per the BADI implementation. I am unable to see that in the Portal link. Any thought what is missing? Joe
-
MappedSuperclass inheritance problem
Using Oracle TopLink Essentials - 2006.6 (Build 060608) Here is the hierarchy: @MappedSuperclass public abstract class AbstractEntity implements Serializable, Persistable { @Version @Column(name="VERSION") private Integer version; @Entity @TableGener