Using Windows 2003 enterprise edition?
Hi,
I am about to install a SAP j2ee instance in windows 2003.
I was under the impression that only Windows 2003 enterprise edition was supported/recommended for SAP productive instances. Enterprise version is costly compared to standard version.
Now, it looks like standard edition is acceptable itf you can handle memory limits (4GB for 32-bit and 32GB for 64-bit).
Can someone confirm my assumption?
thanks.
Hi Eric. From instguide you can use this servers for 64 bit (example for Central System) :
Windows Server 2003 :
Windows Server 2003 Standard Edition
Windows Server 2003 Enterprise Edition
Windows Server 2003 Datacenter Edition
For any version of Windows Server, you need the
latest supported service pack.
A suitable Windows Resource Kit is strongly
recommended.
You can't use 32 bit for Production system, in any case for release NW SR3 -->
you can't even install on 32 bit platform.
P.S. for HA for example you can't use Standart Edition ...
P.P.S for example read this
Re: SAP's compatibility with Windows Server 2003
latest answer are from SAP member.
Regards.
Edited by: Sergo Beradze on Nov 12, 2008 10:54 PM
Similar Messages
-
What hardware is required to setup Fail over cluster using windows 2003 enterprise edition.
I want to setup fail over cluster...i have already installed HP 350 G6 server in my environment. now i want to know which hardware i may require to setup failover cluster for statefull application. and secondly, does my existing server can be utilized .
AN Update:
The Oracle Universal Installer shows the following in the screen before the error appears:
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
\MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
m
toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
.................................................Val: 0
. 79% Done.
Copy successful
Setup in progress (Wed Mar 02 16:26:05 IST 2011)
.....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
opmnctl: opmn started
Please help me.
Thanks and regards,
Adm -
Error while Installing R12.1.1 on Windows 2003 Enterprise Edition
Dear All,
I am installing R12.1.1 on Windows 2003 Enterprise Edition Server. I am using the media source that i have downloaded from Oracle Edelivery. I have done a MD5Sum check on the dowloaded files based the MD5SUM Check details given in site. (Not after staging).
I have the stage files in the same partition as the partition in which the OS & Oracle is being installed (Free space is 300GB after staging)
When the Installation reaches 53%, the installation fails with the following Error: "RW-50004: Error code received when running external process. Check log file for details. Running APPL_TOP Install Driver for VIS Instance"
Log File:
=====================
e:\oracle\VIS\inst\apps\VIS_r12\logs\03021433.log
================================
Processing Step 3 of 5
Executing: e:\oracle\VIS\inst\apps\VIS_r12\temp\adrunias.cmd
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
Statusstring Registering Applications Technology Stack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | D:\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -stage D:\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ApplyAppsTechStack_03021625.log
**** truncated *************
- 3% completed
\ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instance
ApplyAppsTechStack_03021625.log
=========================
Started ApplyAppsTechStack at Wed Mar 02 16:25:21 IST 2011
Version:
ApplyAppsTechStack.java : 120.23
Executing home registration for s_weboh_oh...
Registering using Registration Driver
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg1013.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl
setting permissions: 700
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
script returned:
Timed out( 3750000 ): Interrupted Exception
Beginning OUI CLI cloning for s_weboh_ohWed Mar 2 16:25:24 2011
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe -classpath D:\StageR12\startCD\Disk1\rapidwiz\jlib\java;e:\oracle\VIS\apps\tech_st\10.1.3\oui\jlib\OraInstaller.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;D:\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e e:\oracle\VIS\inst\apps\VIS_r12\appl\admin\VIS_r12.xml -nolink -oaVar s_weboh_oh -homestub weboh -log e:\oracle\VIS\inst\apps\VIS_r12\admin\log\ohclone.log
running OUI CLI home cloning:
e:\oracle\VIS\apps\tech_st\10.1.3\oui\bin\setup.exe -nowait -clone -silent -force -nolink -waitForCompletion session:ORACLE_HOME=e:\oracle\VIS\apps\tech_st\10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_r12_WEBOH oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_r12_WEBOH -J-Doracle.installer.noLink=true
Executing script in InstantiateFile:
e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\adouiweboh.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\ouicli.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\ouicli0.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\txkstubcfg1013.pl
dest : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone\txkstubcfg1013.pl to e:\oracle\VIS\inst\apps\VIS_r12\out\txkstubcfg10130.pl
setting permissions: 700
instantiate file:
source : e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\template\apachectl_sh_1013_oh.tmp
dest : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl
backup : e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\bin\apachectl to e:\oracle\VIS\inst\apps\VIS_r12\out\apachectl0
setting permissions: 700
e:\oracle\VIS\inst\apps\VIS_r12\admin\log\adcvmlog.xml does not exist. Ignore it
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread -I e:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib -I e:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl -I e:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\clone
ouicli.pl INSTE8_APPLY -1
AutoConfig is exiting with status 1
RC-50013: Fatal: Instantiate driver did not complete successfully.
e:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
I have gone through the meta link document [989752.1]. But I feel that document does not apply to me as i am not running the installation from a network storage area.
Pl. help me.
Thanks and regards,
Adm.AN Update:
The Oracle Universal Installer shows the following in the screen before the error appears:
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks w
ill be executed.
Preparing to launch Oracle Universal Installer from D:\DOCUME~1\ADMINI~1\LOCALS
~1\Temp\OraInstall2011-03-02_04-25-26PM. Please wait ... Oracle Universal Instal
ler, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
...............................................................Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
Val: 0
Val: 0
Val: 2
Val: 0
Val: 0
path: D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\jre\bin
;.;D:\WINDOWS\system32;D:\WINDOWS;D:\StageR12\startCD\Disk1\rapidwiz\unzip\NT;D:
\MVS\VC\bin;D:\cygwin\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbe
m
toload is D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2011-03-02_04-25-26PM\Win
dowsGPortQueries.dll
100% Done.
Copying files in progress (Wed Mar 02 16:25:59 IST 2011)
.................................................Val: 0
. 79% Done.
Copy successful
Setup in progress (Wed Mar 02 16:26:05 IST 2011)
.....Oracle JAAS [Wed Mar 02 16:26:28 IST 2011]: exception: 9
opmnctl: opmn started
Please help me.
Thanks and regards,
Adm -
Since 6 months, as soon as I open Firefox and type in a website, it just freezes. Its stops loading the website and also the whole firefox window freezes : it does not minimize and neither it pop backs. I have tried all the resolutions provided but none of them work for me. Really bad. If soon this does not resolve, I will trash out Firefox permanently from my laptop - though I do not want to do this :(
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Migrating windows 2003 standard edition to windows 2008 enterprise edition
Hi
We are using ECC 5.0 and our PRD system is running on windows 2003 standard edition,and recently we have got some physical memory problem.as windows 2003 standard edition supports only 4 GB of RAM. and we want to extend our RAM for that we are planning to upgrade os to windows 2008 enterprise edition,is that possible.and after upgrading OS what are the activities that need to be performed for SAP to run succesfully,kindly suggest.
Regards
PranavHi Markus
I read note SAP Note 690432 - Windows 2003 Support in it regarding upgradation of os windows 2003 standard edition to windows 2003 enterprise edition.
Upgrade of Your Operating System
If you upgrade an existing SAP system to Windows Server 2003 perform the
following actions:
o Install the latest R3DLLINS
You find the latest dynamic link libraries R3DLLINS for Windows
Server 2003 on the EXT-Kernel CD in the NTPATCH directory.
o Replace the R/3 kernel with the EXT-Kernel.
If you do not replace it you will get error "SICK" after the first
logon attempt after the start.
In this case, download the disp+work package(s) from the SAP
Service Marketplace at service.sap.com/patches and unpack the
patch(es) to directory usr\sap\exe:
dw*_<patch-level>
Use at least patch level 186.
o Use the latest saposcol version.
This version supports the changed performance counter of Windows
Server 2003 to determine values for ST06 and RZ20.
You can find the latest version in file saposcol_<Patch Level>.CAR.
in the SAP Service Marketplace.
o SAP DB only: See SAP Note 315237.o Compatibility of the Hardware with Windows Server 2003
You can perform the upgrade to Windows Server 2003 only if the
hardware has been explicitly released for this purpose. To check,
do one of the following:
- If the Windows Server 2003 CD is available, check compatibility
with WINNT32.EXE in the \I386 directory. The exact statement
is: <DRIVE:>\I386\WINNT32 /CHECKUPGRADEONLY. The result is
stored as text file WINNT32.LOC in the present Windows
directory (e.g. C:\WINNT).
- The hardware has successfully passed SAP hardware certification
(http://www.addon.de).
- The hardware is contained in the Microsoft Hardware
Compatibility List (http://www.microsoft.com/hcl).
- The hardware has been released for Windows Server 2003 by the
manufacturer. This information is published on the
corresponding website.
o Kerberos Single Sign-On
When the SAP system is installed on Windows Server 2003 you can
setup the Kerberos Single Sign-On. If you use the kerberos protocol
the information exchanged between the SAP frontend and the
application server for authentication is encrypted.
The procedure for setting up Single Sign-On is described in all
recent installation guides which you can download from the SAP
Service Marketplace at: service.sap.com/instguides.
o SAP domain under Windows Server 2003
Follow the instructions of the Windows documentation for the
migration of a Windows NT 4 domain to Windows 2003. For the SAP
environment some additional points need to be observed.
For Windows NT 4 there are two models for the SAP system domain:
- Single domain
All users and the SAP system build one single domain. This
domain can be migrated to Windows Server 2003 and exist there
as single domain.
- Additional domain
There is one domain for the users and a second domain for the
SAP system(s). For a migration to Windows Server 2003 the SAP
system domain has to be created as child domain under the user
domain. A "Top-down" procedure is to be used. The higher domain
(the user domain) must be migrated prior to the SAP child
domain. If the user and SAP domain is part of a larger domain
structure the complete domain structure for Windows Server 2003
needs to be planned in a preparing phase. Usually, the
structure created under Windows NT 4 has to be re-arranged and
consolidated.
The name space of the root domain and all sub-ordinated domains
has to be defined and the distribution of the DNS services
needs to be determined.
Note the following:
The SAP domain has to be created as child domain.
The SAP domain must not be converted into an organizational
unit (OU). OUs are not supported by R3SETUP and R3up.
in it nowhere it is mentioned about system copy so plz suggest. -
Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition
can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN
Hi,
Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
Check: System architecture
Node Name Available Required Comment
rac11 unknown 32-bit failed
rac22 unknown 32-bit failed
Result: System architecture check failed.
Can anyone throw more light to resolve this issue.
Note that i have successfully does this on Windows 2003.
Any help will be highly appreciable.
Thanks
Nilanjan -
Do I need the /3gb switch on Windows Server 2003 Enterprise Edition
I have an Oracle 10g database running on a Windows Server 2003 Enterprise Edition with 16gb of RAM. Do I need to set the /3gb and or /PAE switch in the boot.ini file for Oracle to use this memory?
This metalink doc talking pretty extensively about the setting
Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
Doc ID: Note:225349.1
As you might know 32bit system has limitation of 4G max addressable memory issue. In Windows that's 2G limit because Windows reserve 2G for system. With /3G switch you can let Application address 3G with 1G for OS, if your system has more than 4G you need to use /PAE to address memory beyond 4G.
Of course if you don't plan to allocate more than 2G to Oracle SGA then don't need the settings. -
Install Oracle 10g on Windows Server 2003 Enterprise Edition
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT) -
FMS on Microsoft Windows Server 2003, Enterprise Edition (64-bit)
Hi,
I am gotta buy Microsoft Windows Server 2003, Enterprise
Edition (64-bit) for my deployment of FMS 2.
As I read FMS 2 system requirement, it only support Microsoft
Windows Server 2003, Enterprise Edition (not mention 32 / 64-bit).
Does anyone got idea on this issue?
Thx a lot!
AlanAt this time, FMS is only officially supported on the 32 bit
version of Windows Server 2003. -
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
Dear all,
we are just trying to install IDES 4.7:
IDES 4.7 Installation under Windows 2003 Enterprise Server, Xeon 64 bit
But the installation break with error Message:
Error 5 (Access is denied.) in excution of a "NetServerGetInfo" function, line (233), with parameter (saptranshost, 101).
MOS-01224 Failed to add privileges "NetcbPrivilege SeAssignPrimaryTokenPrivile SeIncreaseQuotaPrivilege to account ....." ....
FJs-00012 Error when excuting script....
Any experience or help from your side?
Thanks in advance
HanseAtikHi. First login in your server with user "sid"adm after go to START --> RUN --> CMD
adn execute "R3trans -d" Tell what result .
About documentation read -->
service.sap.com/~form/sapnet?_SHORTKEY=00200797470000065912&
in left corner chek your release like :
"SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)"
After read the document for your release, for example if you use the Oracle on WIn and R/3 Enterprise 4.7 x 2.00 SR1 -->
Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
Regards.
Edited by: Sergo Beradze on Mar 21, 2008 10:55 AM -
CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server
Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
AhmedHi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed -
Admin Console errors in fresh install on Windows 2003 Enterprise.
I have attempted to install 6.1 SP4 on two different Windows 2003 Enterprise boxes. Neither has W2K3 SP1 on them. The installs proceed using a typical install with no errors reported. All defaults were accepted during the install. I can start the server for the Admin and web server instances. I can hit the default page on the web server instance. When I attempt to launch the admin console, I am prompted to logon, as expected. I enter my credentials and promptly get an HTTP 500 error. I check the logs in C:\Sun\WebServer6.1\https-admserv\logs\errors and find the following line:
[26/Apr/2005:12:43:26] failure ( 2596): for host 192.168.175.128 trying to GET /https-admserv/bin/index, cgi_scan_headers reports: HTTP4044: the CGI program C:\Sun\WebServer6.1\bin\https\admin\bin\index.exe did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal termination)
I searched for others reporting similar problems and the closest I could come to an answer was to make sure cookies were enabled on the brower (they are). I get the same error in IE and Firefox, both locally and remotely. After becoming frustrated with one W2K3 server, I decided to try on another. Exactly the same errors.
Increased loglevels in the server.xml provide no additional logging for this problem. Any pointers to a resolution would be most appreciated as I'm about ready to scrap Sun and move to Apache.
Thanks,
SeanYes, there appear to be problems where certain old versions of Netscape and iPlanet products can leave old DLLs lingering in the Windows system32 directory.
I'd check for the following files in the Windows system32 directory (typically C:\WINNT\system32 or C\WINDOWS\system32):
libnspr4.dll
libplc4.dll
libplds4.dll
nss3.dll
nssckbi.dll
smime3.dll
ssl3.dll
nsldap32v50.dll
nsldappr32v50.dll
nsldapssl32v50.dll
If you find any of these files, you can try replacing them with a copy from your Web Server install. Don't forget to backup first.
Please report back what you find! -
Physical to Virtual Migration Approach for Exchange CCR 2007 on Windows 2003 Ent Edition
Hi Team,
I am running Two exchange 2007 CCR in my environment on Physical node on windows 2003 ENT edition. MY Hardware is end of life and we are planning to migrate/Converting them into virtual environmnet running Vsphere 5.1.
can any one let me know the best approach to virtualize exchange CCR .
Exchange CCR details are :-
Windows 2003 Ent edition.
Excahnge 2007.
Quorum is configuraed on shared folder.
Exchange Primary replicating Data on Exchange Secondry ..Both Primary and Secondry are having Raid 10 Local Disks.Hi Ravi,
you can take a couple of approaches here. First off, I want to make sure you are not wanting to do a P2V conversion, that is taking the OS image that is running on the physical host and, using VMware Converter, create a virtual machine from it. You could do it that way but, depending on how much mail data is there it could take a long time and it's not the preferred approach for Exchange.
I'm going to make a couple of assumptions here:
I'm assuming upgrading to Exchange 2010 is out of the question (if it is not just do that and move mailboxes )
I'm assuming that there is plenty of storage in the vSphere environment to satisfy the requirements of Exchange. Obviously you would have to provide enough storage for all mail data x 2 if you want to continue with CCR.
Your message says "local disks", so I'm guessing the RAID 10 you mention is not available for use for these virtual machines and that you will provide some type of shared storage.
So, if you have enough compute within a vSphere cluster and enough storage (capacity and IO) to satisfy CCR I see two options:
Leapfrog approach
1. Shutdown passive
2. Evict passive from CCR cluster
3. Create new VM, Clustering services, Exchange/add as passive to the cluster (you could run setup in recovery mode /m:recoverserver, but I don't see why you would want to in a cluster)
4. Seed databases
5. Failover
6. Repeat for other physical
New Cluster
1. Create two new VMs
2. Create new CCR Cluster
3. Install Exchange active/passive
4. Move mailboxes
5. Decomm physicals
Obviously these are very high level but the approaches are straight forward. If this is your only set of Exchange servers in the environment you will have to account for any public folders/system folders, etc. Take some time and check out compute usage in the current environment so you are sure you have plenty of compute in the vSphere environment, especially if you are moving into a shared environment.
-alex -
Installing Oracle 11.2.0.1.0 on Windows 7 Enterprise Edition 64bit
My workstation is running on Windows 7 Enterprise Edition with 64 Bit & 4 GB RAM
On installing of of Oracle 11.2.0.1.0 it throws errors below;
Physical Memory - This is a prerequisite condition to test whether the system has at least 922MB (944128.0KB) of total physical memory.
Expected Value : n/a
Actual Value : n/a
List of errors:
- PRVF-7531 : Physical memory check cannot be performed on node "My_Workstation"
- Cause: Could not perform check of physical memory on the node indicated.
- Action: Ensure ability to access the node specified and view memory information.
Any help much appreciated.The following steps usually worked for me when installing on Windows:
1) Copy installation to a staging area.
2) Turn off Norton or whatever security software you have.
3) Right click install and run install as administrator.
Please remember to turn back on your security software.
http://www.idbasolutions.com/ -
FMIS on Windows 2003 Enterprise SP2 (will it install?)
Hi all,
Might be a dumb question but a client has Windows 2003 Enterprise SP2 R2 and I was wondering if Flash Media Interactive Server will install and run fine on it?
The requirements on the site say Microsoft® Windows Server® 2003 with Service Pack 2 but no about "Standard" or "Enterprise".
Thanks for your help!
RyanJayCharles you mentioned installed FMIS on Windows 2003.
I installed FMIS 3.0 on Windows 2003.
CPU is Sempron 3500, 2gig Mem, 1gig ethernet card.
The streaming videos on VOD play fine internally within local lan.
Duration is over 1hour encoded in .flv format
I published swf's to wwwroot on Windows Server on C:\
the VOD's are in on E:\ in .flv format
DSL speed is up at about
Download Speed: 1741 kbps (217.6 KB/sec transfer rate)
Upload Speed: 434 kbps (54.3 KB/sec transfer rate)
Latency: 57 ms
The question is why the sound/video to outside world is not smooth.
Sample is here http://auffant.selfip.org/flvs/poly1.swf
Any suggestions to improve the quality, Where I am missing the boat?
Thanks
Maybe you are looking for
-
Wher is the place holder option to set output encoding in PI 7.1?
Hi In 7.0 we had an place holder to set the output encoding (i.e. ctrlshftrightclick). where is that option in 7.1? please help Regards Osman Abdul Aziz Jabri
-
My trace statements inside my for each loop won't show. Please someone check my code. I"m getting no errors in flex builder. When i debug all vars are holding prober data. Thanks so much
-
Export t_temp to memory id 'Y2'.
i used these export and import parameters in my program !! this is the export syntax.. export t_temp to memory id 'Y2'. refresh t_temp. import t_temp from memory id 'Y2'. delete from memory id 'Y2'. when I'm not passing any values in the export the
-
Cisco WS-C6513 taking long time to save the configuration
HI, cisco WS-C6513 taking long time to save the configuration. Any ideas? Thank you
-
Saving chart data and reload after restart of server?
Hi I have a vi that communicate with another program called EES through DDE and sometimes EES mess up the server. My solution is to automatically restart the server once a day [this is good enough for me]. My question is: How do I get all my data in