Using Windows: Send to -- Mail recipient, msg is sent OK, but not saved in Sent folder, with err msg about it. Sending from within Thunderbird: msg saved OK.

When using Windows 8.1 context menu: Send to --> Mail recipient, message is sent OK, but not saved in Sent folder, with error massage: There was an error saving the message to Sent. Retry? (selecting Retry doesn't help).
Similar issue happens when I open a ".eml" file and Reply of Forward it.
When composing a new message from within Thunderbird, all is OK, including saving in the Sent folder.
Already tried:
Compacting the Sent folder.
Compacting all folders of the account.
Uninstall Thunderbird and install the latest version (31.6.0).

Similar Messages

Messages stuck in outbox when using "Send to Mail recipient" and outlook is closed

A user who uses RPC over https all the time on his desktop in the office. In general
he has no problem to send/receive emails. But when he tried to send a File through right click - > send to -> Mail recipient , New Email window opens and He changes
the subject and add receipt and send email when outlook is close. The email stuck in outbox.
any idea and how to fix it?
Thanks in advance.

Hi,
As what Roady says, it is an expected behavior. This is because the
“spooler” which is something that manages the MAPI transports is working when Outlook is running. So when you sending messages when Outlook is not running, there is no spooler running, and so nothing is going to send your mail. The next time you launch Outlook,
you will see the mail in the Outbox.
For more information about this behavior, please refer to A trip back in time—the evolution of Outlook part of the following link:
http://blogs.technet.com/b/office_resource_kit/archive/2013/08/15/the-mysterious-outlook-outbox.aspx
Regards,
Winnie Liang
TechNet Community Support

Mail created with "Send to Mail Recipient" disappear and are not sent

I have a small setup with a SBS 2011 server (Exchange 2010) 10 users with Windows 8.1 and Outlook 2013.
One user is trying to send mails with attachments to his college´s
but they are never send, are not shown in sent items and can not be found on the server.
The user right click on a PDF file and press "Send to Mail Recipient" Outlook opens his mail is entered into the receiver (internal receiver) and press send. The mail do not show up and as mentioned even in sent items.
I then try to do the same but send through the address book in Outlook / Exchange and these messages appears as they should.
One week later, the disappeared mails suddenly appears in the college’s mailboxes and it turns out there are some mails to external addresses as well, which were not sent until a week. All messages are now in sent mail but they have not
appeared anywhere else before.
I did some tests with the "send to" function which also had the mails disappearing - those mails has not turned up until now. (a week ago)
Now the user (AND all colleagues) are very nervous that something is wrong with their system and the mail does not arrive.
It is only 1 user this has affected but he is responsible for the majority of sales in this company and they are very afraid that they are not responding correctly to large customers.
Is there anyone who can help with debugging in such a case?
I have tried repairing Outlook, started in safe mode, checked the mail server for hanging mails but nothing shows any errors.
Thanks in advance.
Michael Grøn
Michael Gron

Hi,
Have the user logon OWA and send the attachment, will this issue persist?
Please also confirm if the issue exists when inserting an attachment when composing a new email isntead of using the "Send to Mail Recipient" function.
Since only one user has been affected, use MFCMAPI to find if the message is stuck in the user's mailbox:
https://mfcmapi.codeplex.com/releases/view/118446
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

2012 RemoteApp: file associations Emal links and Send to Mail Recipient.

Hello
Is it possible to get Outlook 2013 Remote app to open when you use "send to Mail Recipient"and click email to links?
/Andreas
/Andreas

Hi,
Thank you for posting in Windows Server Forum.
As per my research, the way you are trying to open Outlook 2013 RemoteApp is not possible.
Thanks for your understanding and support!
Regards.
Dharmesh Solanki
TechNet Community Support

Right Click- Send To- Mail Recipient has disappeared!

I have Thunderbird v24.6.0 with Windows 7. I used to have the option to right click on a picture choose Send To->Mail Recipient then choose the size of the picture, etc. The Mail Recipient option is no longer available in the Send To menu. I have checked shell:sendto and the MAPIMAIL file is still there and correct, but it doesn't work.
I have added a shortcut to Thunderbird in the Send To folder and I now have this as a right click option, but doing it this way I cannot choose the picture size (which is why I used this process to begin with).
Is there any way to get the original Mail Recipient option back?

That menu is part of the Windows operating system and has nothing to do with Thunderbird.
Maybe this article will help you.
http://www.howtogeek.com/howto/windows-vista/customize-the-windows-vista-send-to-menu/
If not contact Microsoft.

[SOLVED] XFCE + Thunar: "Send to" mail recipient doesn't work

Hi all,
I'm not able to use the "Send to" -> "Mail recipient" Thunar's feature. Right-clicking on a file (or a group of files) and selecting the option, the following error is returned:
Failed to execute default Mail Reader. Input/output error.
I use Thunderbird as e-mail client (correctly configured into the "Preferred applications"), but the same happens with Sylpheed too, so I think this isn't an application-related issue.
Any hints?
Last edited by s@ndro (2010-11-01 07:41:40)

I found the following:
https://bugs.archlinux.org/task/7021?opened=834&status[0]=
It's not very clear to me if this is an Arch or Thunar or Exo bug, anyway installing 'perl-uri' works for me.
Marking as SOLVED

Send to - Mail recipient does not attach files on new mail

I'm browsing a network share containing some .txt files.
I have full access to this share (in fact I'm the Owner of these .txt files).
If right-click one of these and select "Send to - Mail recipient" Outlook open a new-message window but the .txt file is not attached.
I think that the problem occours only with files over network share because if files are on my local unit i don't have problems.
How can I fix?
O.S. Windows 7 Pro 64-bit - Office 2010 Standard
Thanks.

Send to - Mail recipient function is deponds on the simple MAPI:
http://msdn.microsoft.com/en-us/library/windows/desktop/dd296734(v=vs.85).aspx
Please run "fixmapi" in the Windows Search bar and press Enter and then check if the issue still persists. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane and it w

Hi, I have had an LG Octane for 4 years and loved it. I used it for email, surfing the web and facebook. But 6 weeks ago I stopped getting text messages, I could send but not receive. I was told it was just worn out. So I ordered another Octane from ebay, and it wouldn't connect to the internet. I was told by Verizon that the software had been changed. So I ordered a NEW in Box Octane and I am having trouble with that too. Bing won't work, nothing will work that will enable me to download Verizon Opera mini that still works on my old phone. I have a smart phone with another number but I LOVE the Octane for daily use. Why will my old Octane work but I can't get a NEW one to. Verizon guys are stumped too:( Please help!! Thanks!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

I want to use iCloud as my mail instead of Hotmail or Outlook, but ...

I want to use iCloud as my mail instead of Hotmail or Outlook, but it's not working out, because I only get an error message that it is a problem with activating my e-mail.

If by "merge accounts" you mean merge iTunes accounts (using your Apple ID), then the answer is no. If you bought songs, apps, etc. using both accounts over time, then your are stuck. You need to choose one account for your iTunes.

I am using Windows 8.1 and Prem Elements 13 and Elements is not seeing my recordings on a CF Card The camera is a Canon XF 100 recording in Mpeg2

I am using Windows 8.1 and Prem Elements 13 and Elements is not seeing my recordings on a CF Card The camera is a Canon XF 100 recording in Mpeg2. I have been told it is a codec clash?

jamesb
Premiere Elements 13 Windows 8.1 (assumed 64 bit).
From what I have read, the Canon XF100 uses the MPEG2 Long GOP video compression, however it uses a MXF file extension (container/wrapper format).
Premiere Elements (any version) does not support MXF files.
Based on existing information, you would need to convert the MXF file to another format which is supported by Premiere Elements.
Apparently lots of the MXF converters available online.
Have you been there and done that?
ATR

Ihave downloaded iCloud to my new PC and am using windows 7 and office 2010. I cannot get iCloud to come up on Outlook with the choices for CalendCar and contacrts, my iMail account is there, but not the general coud choices. What am I doing wrong.

I have downloaded iCloud to my new PC and am using Windows 7 and Offie 2010. I cannot get iCloud to come up on Outlook with the choices for Calendar and Contacts, my iMail accnt is there***.me.com, but not the general Cloud choices for calendar and contacts? What am I doing wrong?

I have I cloud 2.0.2.187 loaded just downloaded yesterday.

Hi, I have recently got myself a second hand computer MAC OS X Version 10.4.11,Processor 800 MHz PowerPC G4. Have only used windows before. Unfortunately I managed to uninstall Adobe but now can't seem to reinstall as this an older computer

Hi, I have recently got myself a second hand computer MAC OS X Version 10.4.11,Processor 800 MHz PowerPC G4. Have only used windows before. Unfortunately I managed to uninstall Adobe but now can't seem to reinstall as this an older computer and is not compatible with the new versions. Sorry to sound thick but really have never used Apple before. Would really appreciate any help at all. Thanks..

Windows or apple it makes no difference, if you don't have the install discs you can't install.
Did you buy the machine with Adobe (you don't say what adobe program you're talking about) installed? If so the vendor should have given you the discs or else it's technically a pirated copy. If you're talking about acrobat (which is free) then you should be able to find older versions on the adobe site.

Im using window vista and i've downloaded the new update but cant find it anywhere on my laptop?

im using window vista and i've downloaded the new update but cant find it anywhere on my laptop?

I have already tried removing firefox from my firewall. Even when I do that, my firewall doesn't detect firefox and prompt me to add it. And when I manually add it, it still doesn't work anyways. I've already tried the link as well, but it has been unhelpful. :/
I'm not sure if it matters, but a few weeks before this, I did download Microsoft Security Essentials.

I have the latest itunes and I use Windows and suddenly after working fine for years, itunes will not synch with OUtlook anymore. Any ideas?

I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Using Windows: Send to -- Mail recipient, msg is sent OK, but not saved in Sent folder, with err msg about it. Sending from within Thunderbird: msg saved OK.

Similar Messages

Maybe you are looking for