Using Windows XP and working with Fireworks CS6 and Dreamweaver CS6.
I'm a student and only have Windows XP. I'm working with Fireworks CS6 and Dreamweaver CS6. Can I just get the two of them or do I need to subscribe to the Creative Cloud? Also, can I get Dreamweaver CS6 on the Cloud? I know I can't use Dreamweaver CC with XP.
Moving this discussion to the Creative Cloud Download & Install forum.
Afec1707 I am sorry but you must have Windows 7 or later for your operating system. You can find the system requirements to utilize Creative Cloud applications at System requirements | Creative Cloud.
Similar Messages
-
NW Portal not working with TLS1.0 enabled in IE and works with 1.1 and 1.2
Hi Experts,
We currently have Portal running on SAP NETWEAVER 7.0. When we have TLS 1.0 enabled IE doesn't load the secure webpage. If we have TLS1.0 disabled and TLS 1.1 and 1.2 enabled the page comes up.
The business wants to be able to open the webpage with TLS 1.0 enabled as other websites need that.
Any ideas?
Thanks,
AsadHi Samuli,
We are looking to upgrade but the business has a doubt about the following:
(1) What is the implication of applying the service packs? Is there a way to determine whether the functionality changed in the service packs are in use in the portal environment servicing PSE or the PCI Payment portals?
(2) The service pack option is not without risk considering the NetWeaver portal server for PSE shares the same dev/qa path as the PCI Payment portal application.
(3) Wouldn’t we want to apply the updates to all of the NetWeaver servers, including the production PCI Payment portals?
Thanks for your help!
Regards,
Asad -
Can I use InDesign cs6 to open and work with PM6.5 files?
Can I use InDesign cs6 to open and work with PM6.5 files?
Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager. After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image. Even vectored art. Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
It may be that any cropping gets lost, too? I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days! -
Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer
Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
I used to be able to choose a few photos and email them. Now I have to work with these templates and often do no want to. Could someone tell me the process for choosing to send photos without the templates?
Like Larry pointed out in iPhoto's General Preferences pane:
Click to view full size
OT -
Quicklook does not work with WMV files and quick look no longer maintains resized views when viewing from a folder using the up/down arrows. Any fixes?
Same problem here...
-
Please, I am in a very big problem
I designed the project by Adobe director
And you test the software on the computers on Windows and works with high quality
When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
But I have a problem too big
The project works on some devices and others show me messages mistakes and why chasm different operating system version
Apple's Macintosh and these messages
"biosegnatures" can't be opened becouse it 's from undefined developer "
others
shokwave player error
pleas what can i doWelcome to the Support Communities.
m.raslan wrote:
I tested the project on Apple Macintosh operating system
Click on the menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
Update your product list
m.raslan wrote:
"biosegnatures" can't be opened becouse it 's from undefined developer "
This Apple doc may help:
OS X: About Gatekeeper
m.raslan wrote:
shokwave player error
Is Shockwave Player installed?...
http://www.adobe.com/shockwave/welcome/
...If not, get it here:
http://get.adobe.com/shockwave/ -
What is a good wireless printer that will work with a macbook and windows laptops?
What is a good wireless printer that will work with a macbook and windows laptops?
Any printer that visibly supports OS X will work fine. My personal recommendation is Brother, followed rather distantly by Canon.
Recently I have grown to favor Brother printers over the others. They are inexpensive, their OS X integration is well-implemented, their consumables are reasonably priced, and their technical support is free forever. If you need to call them and explain that you have a Mac, you will immediately receive competent assistance.
The third and subsequent choices are so far down from those two they're not worth mentioning. I have grown to dislike HP printers, for all the above reasons.
Read user reviews from vendor websites - Amazon is a good place to start, since Amazon lets people write almost anything they want... right, wrong, or completely idiotic.
Read the reviews on the respective manufacturers' websites as well, but consider the likelihood of them deleting negative reviews.
Process all those user reviews employing your own common sense, and draw your own conclusions.
Consider AirPrint compatibility for future needs. Those features add very little to the price over a USB - only or wireless printer. Understand that not all wireless printers are AirPrint compatible - AirPrint must be specifically indicated. Choose among this list: http://support.apple.com/kb/ht4356
After OS X compatibility, the next consideration should be the cost of consumables. Laser printers are cheaper than inkjets in that regard.
Here is a list of AirPrint compatible Brother printers and multifunction devices -
unable to play video on www.iranibash.com, it says that MS Silverlight is not installed. But it is installed and works with IE9. I have uninstalled and reinstalled the plugin but it still says it's not installed in Firefox 5. When I try to install it, it says installation failed.
Forgot to mention that it won't play Netflix either.
-
Why does new Skype work with one user, and not another?
Running 19.4.5, I installed the latest version of Skype. (I do not activate it on login) This opens, but crshes/unexspectedly quits on "sign in". I tried the same with a "new user", and the app opened fine. I compared the two users to make sure that Skype was correctly featured in my usual user. No difference. Still crashes.
Does anyone have an idea what could be conflicting with Skype?Right, problem solved! . Am posting this as it may help in future. I use a useful little app called Window Dragon,(a haxie) which helps resize windows with the mouse. This was causing the conflict, but had not with earlier versions of Skype. All I had to do was exclude Window Dragon from working with the new updated version of Skype and everything back to normal.
Solutions to apps that "quit unexpectedly" or crash often mention that haxies can often come into conflict with apps. So best to start with any haxies one has installed, disable, test etc.. -
Working with AVCHD: Log and Transfer FAQs
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information. -
Crystal Reports Version to Work With Vb 6 and VS 2008
Hi,
We have some legacy VB 6 applications which are too large to port over to Visual Studio which use Crystal 7.0
Recently at one site there have been problems with another application which uses a new version of Crystal. Either one or the other will work but not both. This might be solved by ugrading to Crystal XI R2 ( I believe that newer versions can run side by side). However, we also have new projects starting that are to be developed in VS 2008. As I understand it, Crystal XI R2 will not work with VS 2008 and CR 2008 will not work with VB 6.
We really donlt want to have to buy both versions !!
Anyone got any ideas ?
Many Thanks
PaulCR 7 did not support side-by-side installs. Likely what is happening is the your app and the other app is loading crpe32.dll from the \windows\system32 folder. Which obviously will not support each other. This is the only dll that is common among all versions of CR, see below for more info, and that due to it's location can cause issues like this. Newer versions from 8.5 do version checking and athough the dll's have the same name XI R2 will not load other versions, there are exceptions. The exceptions are UFL and some legacy database drivers that will work in any and all versions.
A few possible work arounds, in your app do version checking when loading crpe32.dll or specifically if crpe32 is residing in a memory space that some other app has loaded it and Windows will share, check the version of the dll and if in your case it's not 11.5.x.x. then pop up a message indicating they must close the other Crystal app before continuing.
Move all the runtime files into the applications startup folder, what's specified in the Icon on the your desktop or short cut. Moving them there may fix this, we start looking for our runtime where your EXE is located and then in the working Folder, then in the \system32 folder and finally down the PATH statement. We also have hard coded specific location in our load methods. In this case you may have to rename the \windows\crystal folder from the CR 7 install. But I don't recall if this will break the CR 7 app.
Also if you are moving the version 7 runtime or the other app it may break that application so make note what you did so you can restore it. Also highly suggested to back up everything and test this on a test machine before applying to the production PC's.
You can use tools like Filemon and modules from our site. You can get filemon from www.sysinternals.com.
Other than that it will not likely work due to 7 not supporting side-by-side and will load anything it finds. And of course, Don't support or install both versions of software on the same PC. -
Safari won't work with CNN Pipeline and other sites all of a sudden?
Safari won't work with CNN Pipeline and other sites all of a sudden? A few weeks ago Safari was working OK but now I often have to use Firefox to visit certain webpages.
Anyone else having this same problem?
Is there a quick fix?
I'm using Safari 2.0.4
Thanks.Hi QuickTimeKirk,
I have WMP version 9, as well. I do not use F4M, for many users f4mac is what helps.
I find some items work while others do not. I always get an alert about the wmp , which version it is, takes very long to load, I find it is not consistant with Safari, as seems the poster of this topic has found.
Quoted from ms Mactopia site:
http://www.microsoft.com/windows/windowsmedia/player/mac/
Download and find information about Windows Media Player for Mac and playing Windows Media files in your QuickTime Player. Which download is right for you?
Windows Media Components for QuickTime
Windows Media Player 9 for Mac OS X
Windows Media Player 7.1 for Mac
Important Information
Microsoft will continue to offer Windows Media Player for Mac as a download free of charge, but has no plans to provide future updates or product support.
We are pleased to offer Windows Media® Components for Quicktime, by Flip4Mac™, as an alternative for Mac OS X users wanting to play Windows Media Audio and Windows Media Video.
~•~
Validation of the cnn home page using the W3C Validatior, http://validator.w3.org/
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.cnn.com%2F
though 41 errors is not as poor as some, Firefox handles the site better than Safari, imo.
Some sites just work better with Firefox or an other browser.
Cheers,
Eme '~[ ) -
Im trying to install windows 7 in on my macbook pro, i thought it just install like intel based PC, so i use windows 7 DVD, i format the harddisk, and installation failed. When i reboot, OS X is missing, because i've format my harddisk. So what should i do to make my MBP is with windows 7
Thanks for all of your help! Big time!
Guys, I been in the business working on PC and MAC for years. So I am not green at this, I was looking for some kind of option to get past the boot loader.. Which is failing.
I know how to boot into these modes.. Done tons of research before posting and couldn't find anything.
It will not go into Internet Recovery, or any thing else. I hear the sound .. then that is it.. I get nothing else..
I have tried clearing the NVRAM which is Option + Command + P + R
Still nothing..
So I thought I would try here to see if maybe there was some trick out there someone might know of that would work.
What else guys? I am hitting th keys right..
Maybe you are looking for
-
Hi there. I wanted to know if it is possible to define a tolerance limit for accounts payable ? Pls let me know the steps involved
-
Seeburger BIC Mapping Designer Material & Further Validations
Hi Guys, I was hoping if someone can point me to more material on BIC Mapping designer as only thing i have the standard PDF which came with it. However I need to do more stuff e.g. enhance validations and put a few more checks in. Was wondering If o
-
Safari - attempting to upgrade but getting bill of material error
please help. i am attempting to upgrade my safari to the latest release. i have been receiving error message stating i don't have the Bill of Materials. I reloaded all the software that came with the laptop yesterday and still having the same issues.
-
Formatted search case statement help
Hi all, I am trying to write a case statement in a formatted search, but am running into an error when I add a condition involving the item code. The code works find with the first WHEN statement involving the customer code $[$4.0.0] however, I recei
-
Things have suddenly changed on my Firefox. My taskbar has disappeared completely from the bottom of the screen. How do I get it back?