Using WinXP Pro 64 Beta and WinXP PRO SP2?

I could not get Games (Half life, Counter Strike, Doom) to work using my beta system. Every time I launch a game the OS gives me the DEP error. I select "allow all". Still no go.
I installed the HD from my old Pentium Based PC(as slave)which is loaded with WinXP Pro SP2 and everything else in the world. I don't have the origional CD because it was loaned to me from my company(Which is why I loaded Beta to this AMD system in the first place). I work from home sometimes. (good excuse?).
I can see all of the files in the old drive using explorer. I tried launching the games from the explorer and got the same negative results.
How do I get the correct Via, AMD, MSI, etc drivers on my XP-32 bit HD so I can boot to it?
Is There a way to run both OS at same time. This chip is hypertheading, so theoretically it acts like two processors?
I now have 3 80G HD. One with WinXP ProSP2, One, 64-bit Beta, One on SATA drive with XP Home SP2 (unregistered)lost that key too--it was a disk that came with a Dell Laptop.

hi
you should really do a clean install for the OSes as the CPUs are differant and need differant drivers etc, most poeple who try to transfer HDDs have probs, until the re partition, format and install.
Many systems can co exist, the boot under XP 64 will find installations and form a boot screen to access them all.  Your going to need a XP CD to reinstall I fear. but then you might be lucky,  if you formatted 1 disk, loaded XP 64 bit edition and let it set the C:> drive with Boot files and drivers you might get away with it.
cheers
jocko

Similar Messages

  • I'm using itools 2013  1115 beta and I'm using iTunes-10-6-3-25 before i was using iTunes 5-1-1 but my itools cannot transfer file to my iPhone it gives this message (unable to ascertain compatibility iTunes.) check out..... my iPhone 4 (16GB) has the lat

    I'm using itools 2013  1115 beta
    and I'm using iTunes-10-6-3-25
    before i was using iTunes 5-1-1
    and i was using iTools 2012
    but my itools cannot transfer file to my iPhone it gives this message (unable to ascertain compatibility iTunes.) check out.....
    my iPhone 4 (16GB) has the latest version 7.1.1
    can you please tell me how to transfer files from my pc to my iPhone?

    Not in a Public forum
    If you have access th Beta then you should be in the Developer Forum and posting there not here

  • Using files between OsX Beta and IOS : No Keyboard editing?

    My ipad is running IOS Ver 6.1.3(10B329). My Numbers for IOS ver 7.5.2. (752). I have an icloud account, and backing up numbers files to icloud.  I am also using Numbers for OSX Safari (Beta). These versions are current as of Aug 18th 2013.
    My spreadsheet is using text, and numbers in multiple tables and fields. When editing  the file on Safari OSX Numbers Beta, and the opening the same file later in Numbers IOS, once a field box is selected to lets say edit the text, it doesn't allow me to use the Keyboard. ??? Its as if, the ipad isn't allowing any ipad pop-up keyboard edits or entries at all in the document. Anybody having the same?

    Do you have a Bluetooth keyboard attached, or attached but forgotten about?
    Turn off Bluetooth in settings, and retest.
    --Sam

  • I just started using iCloud Photo Library (Beta) and am wondering if I can delete photos from my iPhone and have them remain on my iCloud Photo Library -- is this possible?

    I have iCloud Photo Library Beta on my iPhone 6.  Can I delete photos from my iPhone and have them remain in my Photo Library?

    Yes, that should be possible.
    Apple’s iCloud Photo Library- A Quick How-To Guide | Re-code
    iCloud Photo Library — Everything you need to know! | iMore
    iCloud Photo Library beta FAQ - Apple Support

  • IOS Beta and updating to public release?

    I am new to using iOS Beta. I used the iOS 5 beta and now that the public release is out what do I need to do to update to the public release instead of the Beta? Thanks

    Since you are either a beta tester or a developer you need to post your question in the Developer's Forum or contact the developer who got you the beta version.

  • Re: Installing WinXP Pro SP2 / Boot Camp - Drive Bay 2 - which partition?

    I am stuck and I can't seem to find the answer through Google searches.
    I have a Mac Pro and I am working on installing WinXP Pro SP2 on a second SATA drive. It is a 500gb drive by Western Digital and it happens to be the same size as the Mac OSX drive - 500gb.
    Because they are alike in size I can't tell which is which in the installer. Here are my options:
    476938mb Drive
    H: Partition 1 (Unknown) - 476938 free
    476938mb Drive
    I: Partition 1 (Unknown) - 200mb free
    C: Partion 2 (Unknown) - 476938 free
    My guess is to install WinXP on the H: partition and I just want to confirm this as I don't really wish to wipe out my MacOS on the drive in Bay 1.
    Can anyone confirm this? I wished this was addressed in the Boot Camp Installation Guide. They only address one drive that is partitioned, not two seperate drives. Also nothing listed shows up with the label BOOTCAMP.
    Thanks in advance.
    Rob

    Pull your OS X drive.
    XP and Vista 32-bit only give you 1.9GB of RAM.
    If you don't need native access or 3D you might just want to later use it with Fusion, VirtualBox or Parallels.
    Apple uses GPT (GUID) which creates those small 200MB and 128MB partitions you see that are essential.
    For me, I would just format the drive as MBR, and FAT/MSDOS or if you have NTFS from MacFUSE or Paragon, format as NTFS (preferable), and pull OS X and then install.

  • Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

    Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
    Thanks
    Jeff Pulera
    Safe Harbor Computeres

  • How to use ssd as boot drive and hdd as storage on a macbook pro 13

    Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one . by formatting using mac software . I would like to run all programs and OS but would love to have my downloads and useless data on run on my 1tb 5400rpm hdd without me have to manual send it there..

    Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one
    Each drive mounts as a separate volume. There is no convenient way to make them look like one contiguous volume.*
    Franky, with an hdd and a ssd I would recommend you put your home dir on the hdd and leave the ssd for the OS and your key applications.  It's relatively easy to do and I think better than moving only portions of your stuff.
    How to Move the Home Folder in OS X – and Why
    * There are ways to to make musltiple volumes appear as one large drive but I think it is beyond the scope of this discussion and not appropriate to this configuration.

  • I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

    I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

    Hi
    rmarlia wrote:
    I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
    Armadillosound wrote:
    To create a fade out press T to open the tool menu and select the fade tool.
    Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
    Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
    https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
    CCT

  • Using MacBook Pro to convert pdf to word doc...downloaded...converted, and what I got was illegible. What's the deal?

    Using MacBook Pro to convert pdf to word doc...downloaded...converted, and what I got was illegible. What's the deal? Did I miss a couple steps along the way?

    Hi Deborah,
    Please Elaborate your issue so that i can assist you better.
    Regards,
    Rahul

  • I'm using mac pro 3,1. can I update processor and ram as sam as mac pro 5,1?

    I'm using mac pro 3,1. I would like to upgrade to mac pro 5,1. However, I don't want to buy the new mac pro machine. I want to ask about the case I just want to upgrade the mainboard and ram only for cheaper price. I don't know that is possible or not. If yes, how much for the upgrade cost?

    $2100 for Special 5,1 2.8
    pull the 2.8 and slap in a 6-core 3.33 W3680
    Wait and save, you will wish you had when Ivy Bridge has PCIe 3.0 and everything
    Read what IDF and Intel are showing for 2012
    There isn't as huge a jump in 5,1 as I think you assume.
    Get some SSDs, RAM, PCIe 6G card
    And you should look into 5770 or better which you can take full advantage of.

  • How to remove shine or glare from face ( forehead cheeks and nose) using Premiere Pro?

    Hi there,
    I need to remore some glare from a person's face during a footage. This person has a darker skin tone and the lights we had in the room reflected on his forehead  and nose. Can I do that using Premiere Pro or any other adobe software? I would prefere to watcha  video tutorial or read some step by step instructions. If you know where I can find the answer to this I would apreaciate it !
    Thanks

    If you're just needing to bring down the highlights in some hot spots on the face, then using the Curves effect or the Three-Way Color Corrector to just pull down the highlights would be an easy thing to do. Since you probably only want to target the face and not modify the rest of the scene, you'd probably be better off doing this in After Effects because of its superior masking and adjustment layer features.
    Feel free to come on over to the After Effects forum to ask for specifics. Here are a couple of movies that show how to target just a face with an effect:
    using motion tracking and rotoscoping
    using Roto Brush

  • How would I add a arrow and a comment on a video clip using premier pro

    I am trying to edit a video clip and need to add an arrow and a comment onto it for a few seconds...  How can i do that...

    Hmmm, you would probably get a better response asking in the Premiere Pro forum. But before I move the thread, are you ONLY using Premiere Pro? Or are you really using Adobe Captivate but you are importing a video from Premiere Pro?
    Cheers... Rick

  • Just bought a used mac pro and it has 4 video cards?

    Hi all, I just bought a used mac pro and it has 4 Geforce 7300 GT video cards in it. Why would it have 4? Is it just to display on 8 monitors, or can OSX use the power of each card? Is there anything I can do to take advantage of these extra cards? sell them?!

    No, OS X cannot combine the four cards. All they are good for is to connect 8 monitors. If you don't plan to do that then you're better off removing three of them (only the upper three.) This will save energy - roughly 50-75 watts per card - and the computer will be cooler.

  • I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    I've uploaded Acrobat XI Pro and it freezes when I'm using it.  I uninstalled and re-installed.  When I login, it says that it is unable to validate the account and has an option to use the trial.  How do I fix this?

    This is an open forum, not Adobe support... you need Adobe staff support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for

  • Html files play in main stage of flash

    How can macromedia flash play html files? I have a problem my friends! First of all I should say that I know flash is not a browser!!! I have lots of internal and external html files next to my main swf movie and I made lots of botton for each html f

  • Need help with Cluster of Buttons displaying a message to which button is being pressed.

    Create a VI with a cluster of six buttons labeled Option1-Option6. When executing, the VI should wait for the user to press one of the buttons. When a button is pressed, use the Display Message To User Express VI to indicate which option was selected

  • Solid State Drive (SSD) on MacBook Pro unibody (and fast hard drives)

    I've reviewed the 80GB Intel X25-M solid state drive (SSD), along with the Hitachi 320GB Travelstar 7K320, Seagate 320GB Momentus 7200.3, Western Digital 320GB Scorpio Black and Western Digital 500GB Scorpio Blue. All of these are great drives for th

  • Why logical partition is a must for voting disk and OCR

    Hi Guys, I just started handling jobs for RAC installation, I have a simple question regarding the setup. Why does logical partition have to be used for voting disk and OCR? I tried partition the disk that were provisioned for voting disk and OCR wit

  • Room Finder Auto Notification Setting to Go to People Delegate

    Still looking for help! We are setting up Room Finder to work with 120 conference rooms over five cities. About 40% are managed rooms, meaning they require a delegate to approve the request, and the rest are self-service, auto approved based on avail