Using Wireless in Windows 7 on Macbook White

Hi, I recently purchased a Macbook white and have both Mac OS 10.6.2 and Window 7 installed using Bootcamp.
However after setting up everything in the Windows 7, including drivers from the Mac OS installation disc; the network adapter (Broadcom 43xx) has no driver, i scan thru the disc, found a Broadcom driver and reloaded it, and yet did not help. So the Windows 7 could not setup wireless except connect directly to the router.
Can someone advice.
Thanks and Regards
Jonathan Ong

I hv found a way to install the driver from the Mac OS disk...

Similar Messages

  • What drivers do I use when installing windows 7 on macbook pro late 2013?

    I purchased a new macbook pro from bestbuy. I would like to install windows 7 using bootcamp. Now I have read online that macs come with a driver cd well mine didn't and I got it new in sealed apple box..
    What or how can I go about getting windows 7 to fully work on bootcamp.. I've yet to try to install windows 7 yet beacuse I am lost when it comes to this cd and the drivers...

    See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
    In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
    The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
    Good luck,
    Clinton

  • Question on using bootcamp and windows on 15" macbook pro retina (late 2013)

    So i just bought a new macbook pro 15" retina (late 2013) and i want to play games on it like LOL, WOW, and SC2. i was wondering if i really need to play them on bootcamp using windows 7.

    Open Boot Camp Assistant (in Utilities) print out the instructions, setup Windows on its own partition, insall and run Windows natively, not much difference than on any laptop.
    Mac 101: Using Windows on your Mac via Boot Camp
    https://support.apple.com/kb/HT1461
    http://www.apple.com/support/bootcamp/
    Helpful Apple Support Resources (Forum Overview)
    Boot Camp Support 
    Boot Camp Manuals
    Forum that is devoted to Windows Boot Camp:
    https://discussions.apple.com/community/windows_software/boot_camp

  • Windows 8.1 on Macbook White Mid 2010!

    Hey! I installed Windows 7 on my Macbook White unibody mid 2010 model. When I got it I noticed that I needed Windows 8 an application I'm using alot so I installed it. When I installed it I had to install boot camp to get my sound to work and the special keys on my built in keyboard. But the Boot Camp driver I installed says that it's not compatible with this computer model. What do I do now? How do I get it to work? Is there any way for me to use Windows 8 or do I have to re-install Windows 7 and if so how?

    Quick update -- I've tried resetting the pram, running the windows startup repair, and running bootrec.exe through the command prompt. No luck with those so far.
    Just opened disk utility and saw the screenshot below....could be part of it, but I've deleted the partitions several times...

  • Windows XP on MacBook Pro - Can't connect to wireless after bootcamp, why?

    1)I just bought MacBook Pro, just did a boot camp with windows xp. With Windows xp installed, it can't detect wireless network. What went wrong?
    2)When setting the boot camp, do i need to have the boot camp driver? Why?
    3)Can Windows xp on Macbook pro use the same built-in modem, or do i need to get a modem/ adaptor for windows on mac, so the wireless (on window xp on mac) would be able to work.

    hannah llc wrote:
    1) I just bought MacBook Pro, just did a boot camp with windows xp. With Windows xp installed, it can't detect wireless network. What went wrong?
    2) When setting the boot camp, do i need to have the boot camp driver? Why?
    Did you install Apple's bootcamp drivers after you installed Windows? You should be able to accomplish that by booting into Windows and then inserting the installation disc that came with your MacBook Pro. Without Apple's drivers, Windows may not know how to use the wireless circuitry on your Mac.
    3) Can Windows xp on Macbook pro use the same built-in modem, or do i need to get a modem/ adaptor for windows on mac, so the wireless (on window xp on mac) would be able to work.
    With the proper drivers Windows should be able to use the wireless equipment that came with your Mac.

  • White screen after Windows 7 on MacBook Pro

    HI,
    I bought MacBook Pro on Apr 2011 and I am trying to install Windows 7 by using boot camp, but after installation in first boot of Windows it stuck at white screen with some kind of beep sound and keep repeating the same at same point.
    Can I get help in resolving this? I am new to Mac book and trying to resolve the issue from past one month.
    I appreciae all your inputs in resolving the issue.
    Thanks
    Brahmaji

    nevermind anyone... I've already found out how. Once i remembered that taking out the battery resets a couple of things I did just that and my brightness is now back to the way it used to be.

  • Hooking up a projector on macbook white running windows XP SP3 via bootcamp

    Dear friends:
    I have a question related on how to set a macbook (white) computer to recognize a projector while runnning windows XP SP3 (using bootcamp).
    I'm using a mini DVI to VGA adapter.
    The first I did was to plug the cable of the projector on the adapter, then I selected second monitor option in display properties (tab settings) and the best I got from there was to extend windows desktop onto the projector, but the thing is that I want to mirror both screens in order to show a full screen presentation on power point.
    I played with the screen resolutions of both monitors and I got no success, so I decided to restart the macbook. Initially on both screens from the projector and that of the macbook it appeared the logo of windows xp when booting, but then when the session was started the screen of the projector got black.
    I attempted by using F7 key but still got no success.
    Could you give me a suggestion on how to solve this problem??, I hope my english was clear so you can understand my problem.
    Best regards.
    Oscar

    Oh k thanks alot for your input. I think my only option is running XP through VM Fusion on my Time Capsule like Eric mentioned. I would have loved to exclude Mac OS X from running at all in the background while I'm on Windows since the programs I'm planning to run on Windows are Memory intensive. That's the whole reason I'm trying not to have windows installed on my macbook HD and have it run independently like it would on bootcamp. Thanks for all your help tho.
    If anyone has a different suggestion pls feel free to comment. Thanks

  • Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Im completely new to Mac. Im swapping my windows laptop for macbook pro and looking for network storage solution which the Time Capsule seems to do. Is it possible to use this as NAS for my desktop Windows PC - windows 7

    Broadly speaking I want some sort of network storage( wireless or through my existing wifi router) that I can access files for both my windows PC and Macbook and also to access files to my iPad/ iPhone. Some sort of backup and sychronisation so that I can access certain files remotely.
    Buy a real NAS.. synology or QNAP are the standard... although companies like Netgear and Western Digital and Seagate make them as well.
    There is no problem sharing between Mac and PC now.. you do not even need a NAS to do that.. you simply share the hard disk directly. Mac talk SMB.. everything talks SMB nowadays.. so it is easy.
    ipad and iphone are not designed to use NAS.. they are designed to backup only to the cloud or itunes.. but you can load an app like file browser if you want.
    http://www.stratospherix.com/products/filebrowser/
    Remote access to the Apple TC is somewhere between difficult, to impossible from a PC.. Apple use BTMM and iCloud but the service is not offered to PC.
    A real NAS will offer HTTPS or SFTP or several other methods.. that both Mac and PC can use.
    You simply plug it into the current wireless router.. it is a network device and assessable over the network. It is not necessary to buy another router.. in fact that is a waste.

  • I just boot camp my macbook white unibody to windows 7 but I can't setup my wifi plz help!

    I just boot camp my macbook white to windows 7 home premium.
    Used to run on windows XP(no problem with the wifi)
    Plz help~~

    Howdy demccll,
    If your Windows side is not seeing your Airport Extreme, I'm wondering if the Boot Camp drivers (Windows support software) was installed correctly.  That is what installs the Airport drivers among other things.
    Boot Camp: Install Windows on your Mac
    Install Windows support software
    After installing Windows, the support software installs Boot Camp drivers to support your Mac hardware, including AirPort devices, the built-in camera, the Apple Remote, the trackpad on a portable Mac, and the function keys on an Apple keyboard. The software also installs the Boot Camp control panel for Windows and the Apple Boot Camp system tray item.
    You can download the support software by selecting the “Download the latest Windows support software from Apple” option in Boot Camp Assistant. The support software must be copied to an external USB drive formatted as MS-DOS (FAT).
    After you configure Windows, if you kept the external USB drive that has the Windows support software inserted, an installer starts automatically. Otherwise, insert the external USB drive, then double-click the setup.exe file located in the BootCamp folder.
    Follow the onscreen instructions. Important: Do not click the Cancel button in any of the installer dialogs.
    If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
    You don’t need to respond to installer dialogs that appear only briefly during the installation.
    If nothing appears to be happening, there may be a hidden window that you must respond to. Look behind open windows.
    When the support software finishes installing, click Restart, then click Yes.
    After your Mac restarts, follow the instructions for any other installers that appear.
    Check for updated Windows support software by using Software Update or going to the Boot Camp Support site.
    Best regards,
    Nubz

  • Macbook white, Bootcamp 3.1, Windows 7 - trackpad doesn't work

    Hello.
    I am using macbook white (bought in 2008), Mac Os X 10.5.8 (russian). I installed Windows Ultimate 7 (russian) via bootcamp, trackpad was working. Then installed Bootcamp 3.0 drivers, trackpad was working still. I installed Bootcamp 3.1, now trackpad doesn't work at all. I reinstalled Bootcamp 3.1 but It didn't help.
    Please help.

    I found the solution.
    1. Uninstall all bootcamp drivers
    2. Change language of interface in regional settings to English.
    3. Install bootcamp drivers
    4. Switch language back to Russian
    Unfortunatly two-finger tap for right-click still doesn't work

  • My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

    my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
    And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

    You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
    A recent version iPhone or iPad could also be used for this task.
    From the Specifications on the Time Capsule:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

  • HT3231 I am migrating about 450GB from my MacBook White to my MacBook Pro, wirelessly and it will take over three days, having spent 18 hours on the first 15%. Is it possible to interrupt this migation without damaging either source or target?

    I am migrating about 450GB from my MacBook White to my MacBook Pro, wirelessly and it will take over three days, having spent 18 hours on the first 15%. Is it possible to interrupt this migation without damaging either source or target?
    On reflection I should have used a wired connection or migrated at a later time but is it possible to interrupt the process now and rerun with a wired solution without damaging either laptop?

    I have two iTunes libraries - about 172GB that I keep on my MacBook Pro and 500GB+ that I keep on an external drive. If you wanted to do something similar - keeping that precious internal space to a minimum - you can just create two libraries and hold down the option key when opening iTunes: this allows you to select which library you want to open.
    Just a thought...
    Clinton

  • I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

    iCloud requires OS X 10.7.2.

  • How do I convert my Windows 7 Folder to an ISO image to burn to a USB, in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    How do I convert my Windows 7 Folder to an ISO image to burn to my  USB Flash drive (16GB)  in order to use Bootcamp Assistant to partition my MacBook Pro for Mac and Windows?

    Sorry - confusing - My question has NOT been solved yet - can anyone help?

  • Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

    Hi jayhrab,
    Currently, the system requirements listed for an Apple Thunderbolt Display are:
    Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
    OS X v10.6.8 or later
    Apple - Thunderbolt Display - Read the tech specs.
    Regards,
    - Brenden

Maybe you are looking for

  • Trying to get help over the phone!

    Hi! How on earth do you get help with a general enquiry by phoning BT?  All I get is multiple choices to connect and not one of those multiple choices allow anyone to connect to an operator if the question you have is not included in those multiple c

  • Can I buy a Macbook pro retina 13" with 16gb RAM and i7 processor in an physical Apple Store in Spain?

    I´m looking a Macbook pro 13 inch, but I would buy it with an i7 processor and 16Gb ram. Can I buy it in a spanish physical Apple Store or only in the Apple Store online? Thanks

  • CAF Business Objects in Separate Database

    We currently have an application written in CAF which is using Business Objects/Entity Services using local persistence. I believe the local persistence automatically uses the default datasource defined in the SAP WAS portal server and creates the ta

  • How to create a JMS persistent file store using WLST in WLS 9.0?

    Anybody have a good example of this? When I try to create a fileStore and set it on my jms server I am getting the following error: "TypeError: setPersistentStore(): 1st arg can't be coerced to weblogic.management.configuration.PersistentStoreMBean'

  • Product category replication

    Hi Guys, I want to replicate the product category from ECC to the SRM system, can you please tell me the steps to do this? Also is it possible to have both the long and short description from material group in ECC to SRM system? Thanks in advance. Re