Using wireless internet on macbook...its says i'm connected but cant pull up any web pages
I'm staying with a friend, using her internet connection wirelessly, worked fine for 2 days, now my macbook says I'm connected to the internet, but can't get any webpages to pull up at all. It just says connecting....them request timed out try again. I've logged out, logged back in...no luck, took out battery, no luck...help please!
katlyncarlson, Welcome to the discussion area!
Look at the IP address in your Network preference pane under AirPort and TCP/IP. Does the IP address start with 169?
Similar Messages
-
I'm at work and my MacBook Pro is connected wifi but a web page will not display. Other have the pros and is connect. Tried restarting but not working
You're not a liar. They should not charge you $90, it is within the 1-year warranty that comes with it and you are entitled to a free replacement. I have never had the problem myself on a 15 month old MacBook, so there must be SOMETHING that happened to it, maybe without you noticing. But might I recommend a wireless trackpad or Apple "Magic Mouse?"
-
I cant log into i-cloud using my apple id..its saying apple id valid but no i-cloud acct set up
please help me to create an i cloud acct using windows 7
You are getting this message because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.
-
Plzzzzz help
Does the iPod connect to other networks?
Do other devices now connect?
Did the iPod connect before?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am transfering data to new macbook pro from pc. During transfer my pc shut down. I restarted the pc. The macbook pro is now stuck at the transfer stating 44 minutes remaining and is not doing anything. i tried a control, alt, delete???
Wait for the Mac to 'timeout' if an hour passes with no change press the power button on the Mac and hold it for 10 seconds.
Start the migration again when the Mac restarts. -
Can connect to Internet but can't open any web pages
Hi there helpers, I was on my iMac this morning and everything was fine. I could open any browsers and it could load pages very fast, but after I downloaded and tried to install Xquartz ( recommended by apple) I went on my browser again any tried to open Facebook but it didn't work all it said on the browser was NO DATA RECEIVED. I thought it was only Facebook so I tried google but it wasn't, it was all of the websites. So I'm not sure if I've accidentally downloaded a virus or malware. By the way I use google chrome to do the things above but I did do it again in safari. Thanks
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK. -
My MacBook Air says it in connected to my wifi, but my wifi signal has a "!" sign on it. My computer will not allow internet access, help?
When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
Assuming that you've ruled out those possibilities, restart the computer and try again. If there's no change, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Applyand test.
If there's still no connection, and if you have control of the router, compare its settings to Apple's recommendations. Some third-party routers may be incompatible in 802.11b/g/n radio mode. Try setting the mode to 802.11n only. -
My macbook pro says I am connected to the internet but won't load pages
my macbook pro says I am connected to the internet with a strong signal but it won't load any pages. The internet works fine on my iPhone and other computers so it must be an issue with my macbook. Any suggestions??
Change your router channel number. Most times this works & is all you have to do.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using Linsys router contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.
-
I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable. This only occurs on my IPad. My desktop works fine.
Although it may ultimately be necessary to perform a Factory Default Reset on the AirPort Extreme and start over with a new configution, we can first try to see if things will work with the existing settings on the device.
Push the reset button (if present) on the cable modem
Power off the modem by pulling the power cable
Remove the internal battery from the modem (if easily accessible)
Power off the AirPort Extreme and every other device on the network....order is not important
Wait at least 20 minutes....longer is better
Re-install the battery in the modem if it was removed previously
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run 4-5 minutes buy itself
Power up the AirPort Extreme and let it run 4-5 minutes
Then power up each other network device one at a time about a minute apart
Check for a good Internet connection on the network with all devices
If still no luck, you will need to perfom a Factory Default Reset on the AirPort Extreme as follows:
Pull the power plug from the back of the AirPort Extreme
Hold in the reset button and keep holding it another 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
Release the reset button and allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
Then open AirPort Utility end reconfigure the AirPort Express again. -
I can't use my IPAD 4 because its say Icload backup isn't done last 2 weeks
I can't use my IPAD 4 because its say Icload backup isn't done last 2 weeks
Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
i am using and iphone 4 on ios 7.0.6 and i recently installed whats and its says "could not connect to whats app service. please try again later
According to WhatsApp, service is back up & running. Did have a 4 hour outage:
https://twitter.com/wa_status/status/437358172983279616 -
4th Gen won't connect to internet even though it says it's connected
Hello Apple Community!
I have been using my (4th Gen) Time Capsule to back up my devices and for my household WiFi for about 2 years now. The other day, after a storm, my connectivity was down. I thought it was my ISP, but after bypassing the TC and plugging the Ethernet Cable that would normally connect to the TC directly into my laptop, I was finally able to get back onto the web. (In fact, I am typing this question while hard-wired directly to my ISP modem... but I digress).
Here's the problem (and screenshot's provide a thousand words) -
The Time Capsule SAYS it is connected, but every single device that is connected to it {iPhones, MacBook, Xbox, etc.} will not connect to the internet. Each device is giving an error saying "Cannot connect to internet" or "Unable to connect to internet".
Remedies I have tried already:
Contacted ISP and verified that the internet was still working
Reset ALL devices including - modem and TC (like... 100 times)
Checked update for TC (and I am current with update 7.6.4)
Switched from DHCP to Static IP
Programmed DNS server to recommended addresses (99.196.99.99 and 99.197.99.99) and released them back to automatic
Turned OFF security password for WiFi and set network to OPEN
Factory Reset TC
Rebooted both TC and modem through both Apple recommended and ISP recommended power cycle instructions
Read through all current, passed and relevant 4th Gen Time Capsule connectivity issues throughout thread
I am about to see how the TC floats in the pond out back soon... (not kidding).
I have tried everything and it wont work! The only way I am typing this to the community is directly connecting to the ISP modem. Any suggestions, please help!
{P.S. - I took the screenshot of the router by pugging the cord back into the AirPort TC so you could see what I see, but again, to no avail.. I couldn't connect to the internet via the WiFi)Electrical storm could have blown the WAN port of the TC, without the TC diagnostics showing it up.. hence the green led.
If you have not already done so, try powering down the TC for several hours. You need it cold, so overnight is a good idea.
Power up the TC and quickly test it.. you have around 10min before issues start if it has heat issues.
No luck quickly change the TC to bridge mode.. ie on the Network tab.. make sure it is off (bridge mode).
Plug the modem to another port of the TC.. LAN 1 2 or 3.. does the light come on?? From a computer, test if you have internet access. In this mode only one computer should have internet. Tell me how that test goes.
Do you have a computer running any OS prior to Mavericks? Even windows would do so you can load 5.6 airport utility.
In 5.6 utility you can set wan port speed to 10mbit half duplex.. I want you to do that.
And then test it again in router mode.
What modem are you using?? -
Went on the internet on Friday but a box appeared saying firefox could not verify web page and somebody could be trying to impersinate the web page this was my home page it gave me two options the first was get me out of here or that I understood the risks and to continue I clicked the latter and my home page came up this box continued to appear on each occasion I tried to acess any web pages but when I tried to acess Facebook the box only gave me the option of get me out of here it also did this when I tried to acess Mozilla Firefox to see whether there was a problem with the browser I tried to reinstall the browser but the problem persisted I finally got round the problem by reinstalling my computer to an earlier time before I did this I also have the option for Google chrome on my computer and this browser worked fine Facebook etc I prefere Firefox but although the warning box hasn't materialised since I reset my computer Firefox has become unstable where it has frozen on a web page and the only way I can get out is to start the task manager and end the programme even though the task manager is saying that the page is still working correctly but after I have ended the running of the programme it will not reload the firefox browser but again google chrome is fine I have to restart the computer to fix this problem any ideas thanks.
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
*Use a compressed image type like PNG or JPG to save the screenshot
*Make sure that you do not exceed the maximum size of 1 MB
Check the date and time and time zone in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
Check out why the site is untrusted and click "Technical Details" to expand this section.
If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the <b>issuer of the certificate</b>.
You can see more Details like intermediate certificates that are used in the Details pane.
If <b>"I Understand the Risks"</b> is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
*Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
*Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate. -
My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load
Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
Videos I burnt to disc on my pc won't play on my macbook, when I insert the disc into the macbook it says it's blank but plays fine on the pc, does anyone know how to fix this? The photo's I burnt on the exact same type of disc work fine in both pc and macbook but the videos will only play on the pc.
If you are trying to play these on quicktime then what video format are those videos?
Wmp's? You need to install Flip4Mac.
Most other formats? Install Perian.
Or just use vlc instead. It's a much better, more powerful, and more general video player.
Maybe you are looking for
-
Filter Project Server custom field based on current user?
I've got a Project Server 2013 custom field, and I'd like to create a view that only shows me projects where the value in that custom field equals the current user. Simply put: I'm trying to find functionality similar to the [Me] filter in SharePoint
-
Hi All, How can I create extractor on the VBFA table supporting delta mode? Thanks in advance Regards
-
i have created my gmail account on my Nokia C5, all my other folders have mail in them apart from my inbox. Could someone please assist me on what to do as all my other email accounts are working fine.
-
LOGLINE in the Notification's long text
Can the content of the Notification's long text "Log Line" be changed? Standard SAP gives: Date, Time, Username, SAP User ID and Phone number Requirement is to add "User department" the log line. Would this be customization or is configuration?
-
SYNONYM name, VIEW name and TABLE name
Can I have SYNONYM name and VIEW name same as TABLE name within same schema? ...Vivek