Using wireless phone and PC in the same time

Hello, my mum would like to use a classic phone handset for skype calling and in the same time to use a computer for typing skype messages. Is it possible to do this with some phone divice? I have read that phone handsets usually do not need to be connected to the computer. But she needs to have skype program on PC (to read and write messages) and call with phone. Thank you very much for advice.

Using either a device like the Freetalk Connect Me or a Skype USB adapter allows you to utilize a standard home phone for use with Skype. Your mother would be able to utilize the handset to talk and at the same time continue to text chat with someone over the computer. If she's logged onto skype on more than one computer at a time, her chat messages will still go through. If she wants a wireless home phone to work, she would have to have the phone base station connected to one of those adapters.

Similar Messages

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

Hi everyone,
We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
We activate both, but the SC is not returned in SoCo.
Thanks,
Ivá

Hi Ivan
You can use both badi to change srm standard behavior.
but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
for example
shopping cart item has follow on document created as a contract But you need to create a another shopping cart to create a Purchase order w.r.t that contract .
Once follow on documents are created sourcing flag will be removed .- rule
BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
BBP_DETERMINE_LOGSYS - Determine your logical system.
Muthuraman

Can I use both cs and cc at the same time?

Can I use both cs and cc at the same time after upgrade to Adobe Creative Cloud?

Yep. I have CC and CS installed and they both work. However, I don't see why I should use cs.
Regards
Kasper

My wifi loses connection to my phone and laptop at the same time every 30 mins or so.

Hey all.
I have a WRT160 V2 router with firmware v2.0.02. I have had the router for years without any problems. A few months ago I have started to see an issue where I lose connection to my internet on my laptop, and wifi on my phone at the same time. I have wifi calling on my phone and it disconnects also at the same time. All of a sudden, everything will stop working, then about 40 seconds later, it all works again. I lost the connection maybe every 30 to 60 mins
Does anyone have an idea what can be causing this issue? Thank you.
It is really annoying because I rely on wifi calling for my primary phone, and I end up getting cut off when talking to people. BTW wifi calling is for all tmobile phones, but also normal wifi to surf the web on my laptop and phone drops too at the same time.

I would suggest that you isolate the problem. You may start the isolation by connecting a computer directly to the router (hard wired connection). Observe the connection for couple of hours. If the connection is stable, problem might be on the wireless settings of the rotuer. If the connection is not stable, do further isolation. Connect the computer directly to your modem. Observe the connection for couple of hours. If the connection is not stable, call your internet service provider. If the connection is stable, problem might be on the router itself. Upgrade the firmware first (firmware available in the website: Ver.2.0.03 Build 9). After the upgrade, reset and reconfigure your router.

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Using Aiport Express and internet at the same time?

I was just wondering if anyone could offer any advice on this subject please?
I've got a Macbook running through a wireless BT ADSL modem. I have also managed to connect the Macbook to my Aiport Express to allow me to wirelessly pipe iTunes through my stereo. I am aware that you cannot run both at once (i.e pipe music and browse the web) due to the Macbook being able to be only connected to one wireless network at a time.
My questions is whether there is anyway round this? If I bought an Aiport Extreme base station, connected that to my wireless router and used the Airport Extreme base station for the wireless connection would I be able to add the Aiport Express to that wireless network and subsequently have the internet and the Aiport Express running on the same wireless network - hence being able to pipe the music wirelessly and also browse the web at the same time?
Or is there another way round it?
Any info anyone could offer would be a great help
Thanks in advance
James

Ahh am I right in thinking this is the way to do it?
http://docs.info.apple.com/article.html?artnum=302153
Thanks
James

Can AE support wireless 'g' and 'n' at the same time?

Do I need a router or can I just plug an ethernet cable from the modem into an airport express and be ready to go (essentially making the Airport Express my router)?
Also, I'll have two laptop PC's connected to it. One has a 802.11g card, the other has an 802.11n card.
Can both 'g' and 'n' be used at the same time or will I be limited by the slowest card (in this case, the 'g')?

Welcome to the discussion area!
+Do I need a router or can I just plug an ethernet cable from the modem into an airport express and be ready to go (essentially making the Airport Express my router)?+
The AirPort Express is a wireless router that will support up to 10 wireless connections simultaneously when connected to a modem.
+Can both 'g' and 'n' be used at the same time or will I be limited by the slowest card (in this case, the 'g')?+
The default wireless mode of the AirPort Express will support "b", "g" and "n" clients, so "n" devices will connect at faster "n" speeds while "g" devices connect at that speed. The "g" device may tend to slow down the "n" device a bit depending on how much data is being transferred from the AirPort Express to the 'g" device at any given time. When the "g" device is not active on the network, "n" devices will communicate at full "n" level speeds.

Can i use Firewire 800 and 400 at the same time?

I have a HD connected to my 800 port works fine and a GL-2 camera on the 400 and final cut pro won't see the camera. Can I have 2 devices hooked up at the same time?

Yes. But you did not say whether the camera works alone or not at all. In the latter case it could be the camera isn't compatible.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Using CS commercially and privately at the same time.

Hi all,
If I read it correctly you are allowed to use only 1 copy at the time if you have the CS installed on 2 computers.
I can understand completely that a double commercial use is not allowed. What if my friend wants to play a bit around with Photoshop? So only for having some fun with drawing or funny photo editing? Must I buy then 2 seperate Suites?
Thanks!

I think another way of looking at it is this (this isn't necessarily
exactly what this license says, but how I look at this sort of thing).
Most software is licensed to a single user. The "two computer" rule is
there for the convenience of that single user NOT to EVER allow two
peope to use it at the same time.
This "single user" can be one person, or one of a succession of people
not at the same time.
For example, you could have a work computer used by shifts. I'd expect
only one license to be needed, no matter who was working the shift.
In this case could you install a second copy anywhere at all? I don't
think so, because you could never know if someone was on shift using
the other copy.
Similarly, if a home computer is shared, it can never be right to also
install it on a work computer.
So - unless there are elaborate agreements about computer use time -
the only time you can install on two computers is where they are both
unshared, used only by a single person, ever.
Aandi Inston

Airport Express - using range extender and Ethernet at the same time?

So, I am thinking of buying an Airport Express. I am would be using it to extend the range (wirelessly) of my current Wi-Fi and also use the Ethernet ports on the back to connect my DVD player (so I can use the Internet-enabled apps on it). My question is whether the Airport Express can extend the range of my Wi-Fi as well as provide an internet connection to my DVD player simultaesnously.
My current setup in my house is:
- A wireless modem from my ISP (www.telenet.be)
- A Cisco range extender - however, this one often drops the connection so the Airport Express would be a replacement for this.
The current Cisco range extender is plugged in near my TV and it picks up the wireless connection from my ISP modem and extends it as well as being connected to the DVD player. However, I am tired of losing the connection so I thinking of buying an Airport Express.
I have no other Apple network devices (Airport Extreme, Airport Time Capsule, etc.)
Can you help me out?

No, Apple products will only wirelessly extend the signal from other Apple products.
Another way of saying the same thing is that you must have two Apple AirPort routers if you want to extend the signal wirelessly.

Use one software and grab at the same time

Hi everybody,
I have a little problem, I`m sure it is easy to resolve but I didn`t find the solution.
I have my first which use to open and close the gates..... But all the stuff is in a box, I can only check inside with one camera.
I would like to be able to see inside the box with my camera to be able to open or close the gate when I have to.
That`s my main software:
And I would like to add the code to acquire the images.
I know how to witte this code, but when i tried to add it. there are some problem. I can not see the picture pr use the motor.
Anyway I don`t know how to include the acquiring software.
Thanks you for yours solutions ^^

Hi,
Ok I will try to give you more information. I am not an expert so my apologize if sometimes it is not clear or complete....
1. The camera is one "Point grey flea 3 usb 3.0", For the interface, all my stuff have to do with LabVIEW, so I have to acquire the video with LabVIEW.
2. So how to explain clearly everything. Well with picture it is probably better.
First here you will see on what I am working.
My motor is connected with and other piece of metal (inside the white block). In this piece there are some holes. With the motor I am going to shift all this piece of metal and the holes will be just in front off the way. (There are some flies at the beginning, and when I open the gates, they are able to go in the Y.
Then, my motor is connected to Arduino and I connected Arduino with LabVIEW. (it exist one Package)
In this code, there is not only one motor like in the previous picture but two, because there are two side in the white plastic block.
It is a simple code, at the beginning the doors of the piece of metal are close, when I push on "open", the motor turn, pull the peice of metal and the gates are open. and when I push on "Close behind door" or "Close front door" I can choose which one I want to close. The motor turn in the other sens and push the piece of metal to close the doors.
In this code, everything works very well, no trouble with that.
3. and 4. Ok think I explained almost everything.
5. Yes I start with one example in Find Example. the Keyword are "Arduino" and "sevo". I just modified a little, but it is approximately the same.
6. Not really, I began with Labview two month ago, I watched a lot of video, read a lot of post in this forum, and posted a lot of question..... But Yes I should but time flies!!!!! and I`m here only four month to work.
Anyway, All my system is in a closed crate, and above there is one camera to see inside. So Before to close the gate, all my flies have to be in the "Y", and I can only see inside with this camera. So I would like to add in this software, one code to be able to see inside my box when i have to open and close the gate.
I hope really it is more clear for you,
Thanks
Gerday M
EDIT: By the way, probably it will be not really necessary, my boss would like to put one timer, So everything will be done automatically. But It doesn`t matter, I would like to know how to do.
It will not be some lost time for me.

Using a Router and Airport at the same time

Hi
I have a problem. I have a wireless setup in my house and I need a faster internet connection for my podcast. Since wireless has 1 Gigabit Ethernet (I think) I need 100 Gigabit Ethernet through a regular Ethernet cable (I think). Can I plug a regular wired router into my internet reciever and then plug my airport base station into the router. Also can I plug an ETHERNET Cable into the router and into my laptop. I need the wireless so my iMac G3 can still acess the internet. Is this all possible?

I have a problem. I have a wireless setup in my house
and I need a faster internet connection for my
podcast.
How fast is your current internet connection, upload and download?
Virtually all internet connections are slow in comparison to network speeds and therefore increasing the speed of the internet network will have a negligible impact on the speed of any internet activity.
Since wireless has 1 Gigabit Ethernet (I
think)
802.11g is only 54 Mbps and nowhere near 1024Mbps of a gigabyte ethernet connections
I need 100 Gigabit Ethernet through a regular
Ethernet cable (I think).
I think you mean 100Mbps ethernet.
Can I plug a regular wired
router into my internet reciever and then plug my
airport base station into the router.
Yes and as stated uncheck distribute IP addresses on the Airport base station, I am presuming you have an Airport Express, as the Airport Extreme Base Station already has the LAN port you would require.
Also can I plug
an ETHERNET Cable into the router and into my laptop.
Yes

Has anyone used Firefox Sync and Xmarks at the same time?

Firefox is my primary desktop browser. On my desktops, I use Xmarks because I use Firefox, IE and Chrome. It enables me to keep my bookmarks synced across browsers as well as use home/work profiles, etc. However, I'd like to use Firefox Sync so I can sync the bookmarks to my smartphone. Has anyone successfully tried this? I thought I'd ask before trying it myself just in case. Thanks!

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

Use phone and ical at the same time?

Are you able to be in the middle of a call and check your icalendar for an event without dropping your call? If so, please walk me through how you do this.
Thank you!!

Yes - it's easy
Hit the round home button to get you back to your home page when on the call
Then select iCal as usual (or any other app) - and it will open right up for you to review the schedule

Using wireless phone and PC in the same time

Similar Messages

Maybe you are looking for