Using Wireless under Parallels

Hi
I jus installed Parallels, and subsequently Win XP Pro SP2.
I can't seem to use the wireless network. Under Network Connections, I don't see Wireless Connection. Only a Local Area Connection.
I am also using Parallel Tools. Or should I use the native network?
What should I do to get wireless network?
Thanks in advance
Jimmy

did you install the "additional software" from within parellels? (I forget what it is called, don't have it infront of me)
In your vertual machine, you have to select wireless - looks something like 0.1 or something.
maybe someone else can have a look at their settings.
A quick look on their site:
http://download.parallels.com/GA/ParallelsDesktop_for_Mac_Quick_StartGuide.pdf
shows installing the additional Tools. Have you installed these? (page 23)
and on page 28 it shows that Network adaptor needs to be set for en1 Airport/Wireless
Message was edited by: R. Berardi

Similar Messages

Workflow using Photoshop under Parallels Desktop

Photoshop under Parallels
As a switcher from Windows, I still have some programs only for windows, one of them being Photoshop. So if I want to do some professional retouching I have to go to windows, which I'm running under paralells Desktop.
My problem is the following:
I do not really know the best way to access the photos that are stored in the iPhoto Database under Originals or Modified.
Do you have any workflow suggestions?
Thank you!!
Macbook Mac OS X (10.4.7)

Macbook Guy:
Welcome to the Apple Discussions. If you had an external HD, formatted for PCs but one that Macs can read, Fat32 I think, you could store your photos on that drive and then use iPhoto in it's alias mode (see iPhoto's Advanced preferences section) so that the source files would be left on that external HD where Windows could access them.
However, you would not be able to move or rename the source files in either Windows or Mac's Finder. Any editing on the Windows side would be visible by iPhoto but the thumbnail in iPhoto would not represent the edit. Any edit by iPhoto would stay in iPhoto (the modified file is saved in iPhoto's library folder) and not be available to the Windows side.
I don';t know if this method would work if the source files were stored on the Windows partition as I don't know if the Mac has access to that partition when you're in OS X. It might, however, eliminating the need for an external HD. Here are some Tutorials on the alias system that might be of use to you if you go that route.
Do you Twango?

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel

using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel.
double-click opens Excel Office 2011 for mac without the document.
It should open the document in Excel 2010 for Windows.

In Parralells, choose the file you want to open.
Right Click on it and choose Properties.
In the General Tab you will see "Opens with:"
Click the "Change ... " button.
Then choose Excel 2010. The checkbox below should be set to "Always use ... "

Multiple input by using wireless

Hi,
My group members and me are try to develop a project which call wireless data acqusition.
Our main objective is to take are multiple measurement from substation using sensors and converter it to digital by usind ADC.
Then transmit it using wireless device which we try to use such as wifi or zigbee. After that receive it from develop Pc's and do some analysis example measure voltage and cureent. Then this VI's can be monitored and control from the remote Pc's.
I'm manage to do the the remote Pc's application, which I'm applied the web server technique. But my major concern is how to communicate with the routers device. Beside that how to transmit, received input and control the multiple devices from the substation during taking the measurement?
Hope to hear from you guys.
MF Hussin,
"Knowledge Grow When We Share With Others"

MF Hussin,
From what I can understand of your device, there are three
different interface boards you can use. There is the USB, RS-232(serial) and
the Ethernet interfaces. Which one of these are you using?
You can use VISA in
LabView to communicate through all of them but you can also use TCP to
communicate with the Ethernet interface. All of these should be available in
LabVIEW 8.0. There are some good examples about using VISA in the example
finder under ‘hardware input and output’. Examples on TCP can be found under 'hardware input and output - Networking - TCP and UDP'.
There are also some good knowledge bases on VISA and communication
with wireless sensor networks.
I hope this proves useful to you. Please don't hesitate to post should you have any more problems.
LeeM

Performance Using Windows and Parallels?

We are getting new computers at work and are fighting to stay on the Mac, but we are running more and more Windows apps. How does performance of Windows apps under Parallels compare (relatively) to the old days of running Virtual PC? Seems to me that having an Intel processor would provide a big boost in performance, since you no longer have to emulate an Intel. I'm talking about RoboHelp, PowerPoint, and web-based applications, nothing too graphic or processor intensive.

Unless the Windows software you want to use is incredible CPU intensive, using Parallels or VMWare (or even the free VirtualBox) will probably suit you fine. I use PD and Win7 with a number of applications on a 2011 MBA. The ony time I notice any speed degredation is when Win7 is booting up or coming out of hibernation; once it is running there's no noticable performance hit. I can move back and forth between Windows and the Mac smoothly and the programs run fine. (There is, however a noticable hit on battery life because PD is a heavy CPU user.) BootCamp, because it allows you to run Windows natively, has no affect on the Mac because when you are running Windows in BootCamp you aren't running the Mac OS. With BootCamp you run one or the other at one time unlike PD which lets you run multiple OS versions at one time

Disk ikon disappears under Parallels

My optical disk icon disappears when I launch Windows under Parallels. I mean in coherence mode wher the Mac desktop is visible, the icon disappears from the Mac desktop. I can't find it anywhere. On my laptop I can't eject the disk using the eject button when Parallels is running. I don't know if this is really a OSX or Parallels sort of problem, but it's the Mac desktop so I thought I could ask here. All other feature of the Mac and Mac desktop work under coherence mode.

Hi Ray;
Yes, running with only 137.3 MB in your system partition can cause all sorts of problems. I would suggest you get rid of enough of your files to get at least 10 GB free.
Since you are not using the Windows partition that might be a good place to move your photos and music to.
Allan

How do you get the two step security to work with virtual machines running under parallels?

I use Quickbooks running on a virtual PC under Parallels. I have always have Quickbooks interface with Thunderbird on the PC side to email invoices to customers using my apple email account.
Once I switched to two-step verification security, Apple doesn't recognize the "new" computer trying to access my mail account, but it also doesn't send any kind of code to a second device to authorize the access.
For now, I've had to switch back to the traditional security and the above process immediately works again 9without asking me any security questions).
Is there a way to have Apple recognize the virtual PC (or any other non-Mac computer) with two-step verification security?

You have to go to your Apple ID and generate application specific passwords.
Apple ID - Manage

C306g PhotoSmart printing slow using wireless

Printer would print very slow to not at all when using wireless. Wired directly to my router it would perform as expected. I am using a Cisco Linksys E3000 N router with simultaneous Dual-band (2.4 & 5.0 GHz). Hp found the dual band was causing the issue. Found this printer will only operate under the 2.4 GHz. Had to disable the 5.0 GHZ to make the wireless function work. Also make sure the channel selection of the router is set to eleven (11). Channel default setting is six (6).
I do a lot of video streaming to multiple devices (TVs, Laptops, DVD players). This change did not seem to effect the performance of the other devices.

Hello , Welcome to the HP Community. I hope you have a pleasant experience here. I understand you are having an issue with slow printing on your HP Photosmart C6150 All-in-One printer. I'd love to help you with this. First, I'd like you to try printing a self test page again: HP Photosmart C6100 All-in-One Series - Printing the Self-Test Diagnostic Page If the test page printed in less than 60 seconds, then I would suggest following the steps here to troubleshoot the driver and settings on your computer:HP All-in-One Printers - Slow Printing in Windows: Computer Issues If the issue persists after these steps, I'd recommend replacing your USB cable (with a smaller one if it is over 6ft long). If the test page took longer that 60 seconds to print, then I would suggest following the steps here to troubleshoot an issue you may be having with the printer hardware:HP All-in-One Printers - Slow Printing in Windows: Hardware Issues Another thing I would suggest, if the printer is slow even from the printer, would be to make sure the printer is plugged directly into a wall outlet. The printer does have a power moderator built in, so when plugged into a power surge or battery backup, it can often not get enough power. Please respond to let me know if these steps help to resolve your issue!Have a great day.

Activate bluetooth using Wireless Switch?

I'm getting really frustrated now because my laptop seems to have forgotten that a thing called Bluetooth exists. I noticed the bluetooth wasn't working so I tried to install the newest driver but it fails to install saying I need to "Activate bluetooth using Wireless Switch". As far as I can tell this means pressing fn+f2 which turns on/off the wifi and blutooth but this does nothing and besides that is always on.
Next I went to mobility center and found this: .
Bluetooth appears to be on but I still can't connect anything with it or install the latest driver. When I click launch it takes me to my PC settings in which there is nothing about bluetooth. Search bluetooth yields two results: set up a connection or network and turn on or off wireless devices. Under wireless devices there are only two settings, airplane mode and wi-fi. Under Set up a connection everything is related to LAN and Wi-Fi, nothing about bluetooth.
If I go to services.msc I find this: So bluetooth defintiely exists in some form but for some reason I just can't access it and it can't pick up bluetooth devices. Someone please tell me I'm an idiot and I'm missing something obvious, please I've been at it for an hour.

Hi,
If you still haven't been able to resolve this, have you tried physically removing the card, deleting all the drivers, etc., rebooting the system, and after that shutting down. Then physically reinstall the card, either let Windows find the drivers or install them yourself, and see if it straightens out the issue?
You can also check Microsoft's article on troubleshooting bluetooth issues.
Other than that, honestly I'm not sure what you may have missed. Let me know if you've resolved the issue (and if so, how, so that others with the same problems can find your solution). If not, like I said, physically remove the card and uninstall the drivers to see what happens.
Hope this helps.
Todd

Having a problem with commandButton attribute when i am using it under tabl

Having a problem with {color:#800000}commandButton {color}{color:#339966}attribute {color}when i am using it under{color:#ff0000} table{color}
I am using a command button under a table.
here is the example
<h:dataTable value="#{wlmHandler.plexes.plexes}" var="{color:#ff0000}onePlex{color}" border="0" cellspacing="0" cellpadding="0" width="100%" border="0">
<h:column>
<h:panelGrid border="0" cellpadding="0" cellspacing="0" columns="5">
<h:commandButton action="" styleClass="tixbutton" value="#{labels.ADD}" onclick="#{onePlex.tran}"/>
<f:verbatim> </f:verbatim>
<h:commandButton action="#{createTransaction.transactionCommand}" styleClass="tixbutton"
value="#{labels.SUBMIT}" actionListener="#{createTransaction.processAction}">
<f:attribute name="dbName" value="#{wlmHandler.dbName}"/>
<f:attribute name="plexName" value="{color:#ff9900}#{onePlex.name}"{color}/>
</h:commandButton>
</h:panelGrid>
<h:/column>
</h:dataTable >
when i am using this plex name atribute it is giving nullPointerException
{color:#ff9900}this value #{onePlex.name} i cant able to access inside the command button{color}

balu i have tried by seeing u r blog.
this is my structure of tables
plexes (if i iterate plexes table gives plex object)
|
------ plex (plex table gives transaction object)
|
------transactions(transactions table gives transaction table)
|
here i will have a command link to this link i have to pass the plex name which
will come from
i tried in this command action with HTMLDataTable getRowData()
i am not getting the selected row data .i am downcasting this getRowData() to plex.

I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

I have OS 10.8.2 and use wireless at home just fine.
When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
What do I need to do connect via a cable modem?

You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

How do I identify the ports to open on my cisco router from Rogers to allow access through my apple tv - I am not using wireless!

I only have spotty access at best through m Apple TV to itunes, netflix and utube. I am Rogers subscriber (feel my pain) and am now using their CISCO DCP3825 router. Apple TV purchased this past Christmas. I am not using wireless. No issues prior to replacing my old router and Rogers modem to go to DCP3825.
Apple TV is up to date - updated by connecting to my Macbook Pro.
Rogers tech support was of no help - suggested I open some ports - where do I go for the list(s)?
Any help would be much approeciated.

did this search for you
https://www.google.dk/search?client=opera&q=control+open+ports+on+cisco+router&s ourceid=opera&ie=utf-8&oe=utf-8&channel=suggest#client=opera&hs=N7P&channel=sugg est&sclient=psy-ab&q=+open+ports+on+cisco+router&oq=+open+ports+on+cisco+router& gs_l=serp.3..0i7l3.16726.16726.0.16996.1.1.0.0.0.0.49.49.1.1.0...0.0...1c.1.9.ps y-ab.olPaFzjSlmE&pbx=1&bav=on.2,or.r_cp.r_qf.&bvm=bv.45175338,d.bGE&fp=43d9a4347 e8aaeda&biw=1535&bih=773
this may be of intrest
http://www.tek-tips.com/viewthread.cfm?qid=1163449

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV through IPad wherever by using wireless and App Remote

I want to buy an Apple TV device but I need to be sure of its benefits. I have contracted a Satellite TV. Is it true that if I connect Apple TV to system, I can watch TV in my IPad wherever by using wireless and App Remote??

If you have an iPad 2 you can wirelessly mirror it to your TV via the ATV device. If you have an iPad 1 then you can use airplay but not all apps are enabled to push video, as the developer needs to do this.
You can also view all local content from iTunes or your iPad, pushed via airplay/home-sharing.
The other services available are iTunes movie rentals, TV shows (past purchases viewable from the cloud), Photo Stream, Netflix, Vimeo, Podcasts, Youtube, Sports etc.
More info
http://www.apple.com/appletv/

Using Wireless under Parallels

Similar Messages

Maybe you are looking for