Using with different operator

i am pedro from bolivia. My fried send me blackberry tour 9630 and this is blocked with network blocked of verizon it's possible unlocked this?.
For use with sim of my country?

 I am using TS 2010. FYI
ex:
Array XX [ A_Temp,
               B_Temp,
               C_Oil Pressure,
               D_Oilpressure,
Note : A_Temp, B_Temp,C_Oil Pressure,D_Oilpressure all these parameters will be getting  numerical values (dynamically) from the simulink models and also in future I may need to add parameters to this array.
Array YY [A_Temp_1,
               B_Temp_2,
               C_Oil Pressure_3,
               D_Oilpressure_4,
Note : A_Temp_1, B_Temp_2,C_Oil Pressure_3,D_Oilpressure_4 all these parameters will be getting  numerical values (dynamically) from the simulink models
So my question :
I would like to verify A_Temp >= A_Temp_1
                            B_Temp >= B_Temp_2
                            C_Oil Pressure  >= C_Oil Pressure_3  etc

Similar Messages

  • IPop Use with different operating systems Windows And Mac Osx

    so the quetion is this can i use my IPod with different Operatin systems?
    I have a MacBook at home where i keep all my Music in and at the office i have a Windows network i would like to carry some music from home to the office using my IPod. I thought that a solution is to Partition my Ipod 40G in 2 parts and have one of them FAT so that my Windows operating system can view it.
    Did any of you done it? and if so How? did you loose the use of some of the IPod functions?
    let me Know if there are ways to carry music using your Ipod from the MacOSX to Windows Prof or home edition thanks!
    Donatello

    Your problem has nothing to do with data vs music. Music IS data. I've used my iPod for data and music since the first iPod was released. There's no reason to think the two OS versions are involved either.
    Look at your usage practices - and I'm not necessarily suggesting you are abusing your computer. Has one of your computers crashed while the iPod was connected? This could cause data damage that might explain the problem. Have you ever disconnected the iPod without un-mounting it first?
    You might also be creating fragmentation problems if you frequently add and remove data files while at the same time adding and removing music. One decision I made when I was using my iPod to transport lots of movies and photos for a project was to NOT make any music changes during that busy two week period.

  • HELP!! Authorization in the same laptop with different operation systems

    My BF installed Win 7 operation system on his laptop yesterday and re-authorized it when he used iTunes. However, when he finished authorization, a dialog block showing that "*Including this one, you have authorised two computers out of your available 5*" appeared; what's worse, when he connected his iPhone to the laptop, it deleted all the bought apps in the iPhone, instead of synchronizating.
    I also want to install Win 7 operation system, but I'm afraid that the same thing would happen again (to my iTouch).
    We're quite confused that why the authorization in the same laptop with different operation systems is counted as two times. Friends who know please tell us whether this is the case.. If not, please tell us how to deal with it as we frequently re-install operation system for quicker operation.
    Message was edited by: Shiwen
    Message was edited by: Shiwen

    It's the *operating system* that is authorised, not the particular user profile or the hardware. Before upgrading/reinstalling deauthorise and you won't run out...
    tt2

  • Number of elements that can be used with 'in' Operator

    One of my SQL query having 'in' operator failed saying number of elements exceed.
    Is there a limit on number of elements that can be used with - 'in' operator.
    And if yes can it be increased?

    Parag Kalra wrote:
    One of my SQL query having 'in' operator failed saying number of elements exceed.
    Is there a limit on number of elements that can be used with - 'in' operator.
    And if yes can it be increased?You cannot have more than 1000 literals in an IN clause.
    Please check
    ORA-01795, limit on in clause
    Max number of values in IN clause
    Edited by: Rajesh Lathwal on May 24, 2010 12:28 PM

  • Can different music be used with different set of photos in a slide show?

    Can different music be used with different set of photos in a slide show?

    Yes. The basic idea is that you make a playlist of songs and choose that to use with the slideshow, rather than any particular song. In iPhoto 11 you can do this in iPhoto. In earlier versions you do this in iTunes.
    There is a limitation. Each song will play the full way through, you can't croassfade from one to another and so on.
    Alternatives to iPhoto's slideshow include:
    iMovie, on every Mac sold.
    Others, in order of price: PhotoPresenter  $29
    PhotoToMovie  $49.95
    PulpMotion  $129
    FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
    Final Cut Express  $199
    It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.

  • Lightroom 5 Darkens Photos after Importing Images Used with Different Camera [NOT SHOOTING IN RAW NOR B

    I seriously need help, my whole entire catalog of photos just got darkened for some reason after importing photos used with a different camera. What happened is that I imported photos taken with a different camera (Canon EOS 60D) and when I did that, it darkened all the rest of my photos (taken with Canon EOS Rebel T3). Why did this happen? This is making my photos insanely hard to edit.

    If you always want Camera Neutral picture style to be applied, then open one of your images that you have imported and have changed nothing else in Lightroom.  Set the camera profile to Camera Neutral and save new camera default settings.  Then whenever you import that setting will be applied to all of your images.
    If you don't always want that style, you could save a preset that applies the Camera Neutral picture style, and then you could choose to use that preset during the import process.
    It is simply a matter of determining your workflow and then setting things the way you want them to work.

  • How to compare 2 arrays with different operator options using parameters in Teststand

    Pls let me know how to compare 2 arrays using different operators like <= or >= or ==......

     I am using TS 2010. FYI
    ex:
    Array XX [ A_Temp,
                   B_Temp,
                   C_Oil Pressure,
                   D_Oilpressure,
    Note : A_Temp, B_Temp,C_Oil Pressure,D_Oilpressure all these parameters will be getting  numerical values (dynamically) from the simulink models and also in future I may need to add parameters to this array.
    Array YY [A_Temp_1,
                   B_Temp_2,
                   C_Oil Pressure_3,
                   D_Oilpressure_4,
    Note : A_Temp_1, B_Temp_2,C_Oil Pressure_3,D_Oilpressure_4 all these parameters will be getting  numerical values (dynamically) from the simulink models
    So my question :
    I would like to verify A_Temp >= A_Temp_1
                                B_Temp >= B_Temp_2
                                C_Oil Pressure  >= C_Oil Pressure_3  etc

  • Buying iPhone in US using with European operator??

    Hi,
    If I buy an unlocked iPhone in the US, will I be able to use it with my european operator in Europe? I know in the pas there were some issues with it but from what I understand it has now been resolved. I prefere to ask as the unlocked phones are sold through an American operator (T-mobil).
    Thanks a lot guys
    Agnes

    There is currently no unlocked iPhone 6 available in the US. The T-mobile iPhone
    is not unlocked - you must be a customer in good standing for 40 days before you
    can request an unlock.
    Warranty will be valid only in the US - you must personally bring the iPhone back to the
    US for warranty evaluation or repair.
    LTE/4G will not work in Europe. Prices on US website do not include taxes, which can
    run as high as 9% or more.
    Buy your iPhone where you intend to use it to avoid these and other problems.

  • Sharing iTunes between different iTunes accounts on different computers with different operating systems

    I have an iTunes account on my home pc (Windows XP) that I sync with my iPhone. My wife has an iPhone with a different iTunes account that she syncs with her Mac at work. Is there any way to share my iTunes library with my wife's iPhone even though she has her own iTunes account and syncs her phone with a Mac?

    thanks, zevoneer. apparently, I gave up too early in my own search. I'm trying it now - the copy process is taking some time. Well, I had hoped to narrow the access down to only one other account but at least this should provide the access that is needed.

  • Release Skype to Go number to use with different p...

    I have a skype to go number that I use to take business calls when at the computer or to divert when I am out of the office. I have now moved into an office with a landline. Is there any chance that I can get skype to release my number so that I can use it with a BT line so that I do not have to change all of my promo material?
    Thanks
    Guy

    Hello,
    I'm afraid that wouldn't be possible.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • How do you sync itunes between a MacBook and ipad mini with different operating systems ?

    I own a Macbook with OS X 10.5.8 operating system, and have recently bought an ipad mini but I cant sync itunes because it operates on the 10.6.8 system, is ther an upgrade for the Macbook, or is there another way of syncing the two ?

    You need to be running Snow Leopard 10.6.8 to sync with your iPad.
    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether further updates are required.

  • Format version to use in different operation systems

    What Format version do I need to use in OS X and Windows 8.1 ? . Meaning :
    I want to save to a USB device PDF files and be able to see them both in OS X and Windows 8.1
    Thanks

    exFAT would also be a supported format between the 2 operating system.
    NOTE:  FAT32 or exFAT is ONLY good for an external disk or USB Flash Drive that you are going to connect to one system, then disconnect and connect to the other.
    If you do not have a lot of data to transfer save at once (and it is not super sensitive), you might just consider getting a DropBox.com account and use the network to transfer your files.
    If the Mac and the Windows systems are on the same network, then you can also use file sharing from either system.

  • Sharing a printer with computers with different operating systems

    Hello,
    I am trying to setup my printer so that the three computers in my network can share it.
    This how my network is setup:  I have one desktop that is running Windows XP Service Pack 2.  It is connected to a Linksys BEFW11S4 Wireless-B BroadBand Router with a wired ethernet connection. The printer, Lexmark x1185 is connected to this computer(Windows XP) by USB connection.
     I also have a laptop and desktop that are running Windows ME.  The laptop is connected by wired connection with a Zonet ZEN1200 10/100 Mbps cardbus PCMCIA card.  The desktop with Windows ME is connected with a wireless connection using a WUSB11 adapter.  All connect to tthe internet with no problems, but  i cannot get them to share a printer.
    Please Help.
    Thank you.
    George

    check whether they ping each other's ip add ... if yes , then go ahead and enable file and printer sharing between the computers...
    if not able to ping , ensure that the firewalls on all the computers is turned off ..

  • Concat strings for use with ternay operator

    Hi,
    depending on a boolean i want to output an welcome message for a user logged in or "login failed".
    problem: ternary operator only acceps one expression for each argument.
    so, this is ok:
    <t:outputText  value="#{login.loggedIn ? bundle.loginWelcome  : bundle.loginFailed}" />but i want to output the username also, like:
    <t:outputText  value="#{login.loggedIn ? bundle.loginWelcome login.user : bundle.loginFailed}" />but this throws this:
    ERROR - Servlet.service() for servlet jsp threw exception
    javax.faces.el.ReferenceSyntaxException: Invalid expression: '${login.loggedIn ? (bundle.loginWelcome login.username) : bundle.loginFailed}'
    Caused by: org.apache.commons.el.parser.ParseException: Encountered "? ( bundle . loginWelcome login" at line 1, column 18.
    Was expecting one of:
    ...is there a way to concat strings in EL?
    thx

    Why don't you create a method on the managed bean that do that for you?

  • Using Modulus (%) arithmetic operator with decimals

    When trying to use the arithmetic operator modulus with decimals there seem to be some errors in the results. Is there a restriction on the number/value of decimals that can be used with this operator? Am I perhaps just using it incorrectly?
    example ...
    Double valA= new Double("12.4");
    Double valB = new Double("1236");
    double result = valB.floatValue() % valA.floatValue();
    System.out.println("valB : " + valB );
    System.out.println("valA: " + valA);
    System.out.println("result : " + result);
    produces :
    valB : 1236.0
    valA : 12.4
    result : 8.40003776550293
    But :
    Double valA= new Double("12.5");
    Double valB = new Double("1236");
    double result = valB.floatValue() % valA.floatValue();
    System.out.println("valB : " + valB );
    System.out.println("valA: " + valA);
    System.out.println("result : " + result);
    produces :
    valB : 1236.0
    valA : 12.5
    result : 11.0

    Floating point arithmetic in general is not exact. The problem is that you are expecting exact results.
    In the second example where you use 12.5 and 1236.0 is just so happens that both of those numbers can be represented exactly, so you do get an exact result.

Maybe you are looking for

  • How do i get artwork to show on every album

    in itunes, i have successfully assigned the artwork to all my albums, has taken me ages! but ive done it. however, it only shows it for one of my albums wen ive taken the ipod out and looked to see if it has worked. how do i get it to work for all my

  • How to pass a dynamic value to jrxml file???

    Hi all, let me know a thing,How to pass a dynamic id value to the query in jrxml file. <queryString> <![CDATA[select currency_id from currency]]> </queryString> Because for every user,we have to generate a jasper report based on their loginId.So we h

  • Static or Dynamic IP Address

    My remote users are using DSL to get out to the internet.  However, all computers are setup with the private IP address.  Is there a way to find out if the public IP address is static or dynamic? Thanks. Diane

  • ODI IKM SQL to Planning Issue

    Can anyone help me out with this one? I'm trying to run an IKM to Planning to update a Planning dimension metadata outline and am using the IKM SQL to Planning. After executing it, the Operator shows the status completed but an exception occured from

  • Returning a whole vector

    I want to print out the objects in vector from a class called repeat in a class called output. Should I have a get method in repeat.Then in my output class have a repeat variable called repeat then say repeat.getVector and then print the items in the