Using WPA wireless from Windows XP

Not sure what all is involved with this one, but my wireless will only work with WEP encryption from Windows.
No problems with WPA/WPA2 from OSX, but as soon as I reboot I can't connect to the same wireless network I had a minute ago. I can see them, I have good signal, but it just stays on the yellow ball and then tells me it couldn't find a certificate. It's definitely a WPA issue because I have connected to WEP from Windows.
Macbook Pro 15" got it new right before the latest series came out. Installed XP and the Apple supplied drivers.
Thanks.

If you're using a bootleg copy of XP (not saying that I am or anything), you cannot download that patch. Below is the direct link to the file that I had to dig up.
http://download.microsoft.com/download/9/e/b/9eb62d0b-61f0-4c9e-9c52-e3bef96d9e7 f/WindowsXP-KB893357-v2-x86-ENU.exe
Enjoy.

Similar Messages

Call ggsci using batch file from windows- get error

i create a script to use ggsci, start manager, extract and replicat.
i have success doing this in my linux.
here is one of my script : start_ext1.sh
cd /u01/app/oracle/ggs
./ggsci <<EOF
start manager
start ext_s
exit
EOF
clear
i have an error when i do this using batch file from windows.
here is the batch file :
@echo off
cd C:\putty
plink.exe -ssh -2 -P 22 [email protected] -pw oracle "./start_ext1.sh"
every time i try to enter ggsci when i run that batch file, i get this error :
./ggsci: error while loading shared libraries: libnnz10.so: cannot open shared object file: No such file or directory
i didn't get this error when i run the script in linux.
is there anybody can help me?
thanks a lot!

problem solved!
add : . ./.bash_profile before enter ggsci.
it's worked! :)

HP 6500 E709n can't print wireless from Windows 7

I have 3 computers on my home office network, and an HP 6500 E709n that has a wireless connection to the router. The printer does everything it's supposed to from the XP machine. From the 2 computers running Windows 7, the printer will scan and fax but not print.
When I used the USB cable to connect the printer to a Windows 7 computer, all functions worked fine. So it's apparently not just a matter of having the correct driver (and I've now reinstalled the Windows 7 driver twice after scrubbing my hard drive as best I could). I've checked absolutely everything, and all the recognitions seems to work going both ways. But every time I try to send a document to the printer from Windows 7, it just sits in the queue.
Do other users have this problem? Has anyone solved it? Thanks.
This question was solved.
View Solution.

Run this utility from the Win7 machines: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can I use product key from Windows 7 32bit to 64bit?

Hi, i have a Toshiba L505-10V and the original cds(2) with Windows 7 prenium 32-bit.
I have downloaded windows 7 prenium 64bit from here http://www.techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
I use the key from 32 bit but it says its not valid. Is it possible to work with the same key?
Also i download belarc to recoginise my 32bit windows key and it shows me different key from that is on the base of my pc.

Hi
According notebook specification your notebook was delivered with preinstalled Win7 64bit Home Premium and you got 32bit version on recovery DVD.
Both recovery versions are designed for your notebook model and both versions contain activation code so that both versions must not be activated.
I presume you didnt create recovery disc for preinstalled Win 7 64bit version.
You cannot use product key listed in 32bit version. If you use own Windows version you must enter valid product key that you must buy from Microsoft.

Errors using ICertView connection from Windows 7 to Server 2003 SP1

Hello!
I have a RootCA on windows server 2003 SP1. I connect to certificate store remotely using ICertView interface from Certadm.dll to retrieve issued certificates. This scheme works fine from windows XP, but when I call method openconnection (no matter which
way: from powershell, certutil, from code directly) I get following errors:
1. from host not in AD domain "CCertView::OpenConnection No more data available. 0x80070103 (WIN32/HTTP: 259)"
2. from AD domain joined host error is "0x800704C7 The operation was canceled by the user."
However, ICertAdmin interface works on Windows 7 without any problems.
Someone tells me that few years ago hi had checked this scheme and it`s worked!
after this article http://support.microsoft.com/kb/892500 I have a suspicion thah installed SP1 broke DCOM permissions. I configure permissions on COM host according to this article but connection won`t work...
On Windows 7 I have used 2 versions of certadm.dll - native windows 7 and from Server2003 - all the same :(
Can somebody help me make this work or explain why it is impossible?
Best regards.
-- Stanislav.

After enabling debug logging for enrollment by certutil
-setreg enroll\debug 0xffffffe3 and running certutil –view I have get following
1. from host in domain:
certutil –view :
========================================================================
402.511.948: Начало: 19.05.2014 13:34 43.913s
402.516.0: certutil.exe
402.520.0: GMT + 4,00
301.3888.0: certcli.dll: 6.1:7601.17514 retail
301.3888.0: certutil.exe: 6.1:7601.18151 retail
301.3788.465:<2014/5/19, 13:34:43>: Командная строка: CertUtil -config hostname\caname -view
419.5898.0:<2014/5/19, 13:34:43>: 0x0 (WIN32: 0)
705.1857.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
705.2226.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
705.3007.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
1207.632.0: 0x800704c7 (WIN32: 1223)
1207.705.0: 0x800704c7 (WIN32: 1223)
443.258.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
316.1383.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
301.3792.0:<2014/5/19, 13:34:43>: 0x800704c7 (WIN32: 1223)
301.3807.509:<2014/5/19, 13:34:43>: Состояние команды: Операция была отменена пользователем. 0x800704c7 (WIN32: 1223)
402.377.949: Конец: 19.05.2014 13:34 43.991s
2. from standalone host
402.511.948: Начало: 19.05.2014 14:01 22.908s
402.516.0: certutil.exe
402.520.0: GMT + 4,00
301.3888.0: certcli.dll: 6.1:7601.17514 retail
301.3888.0: certutil.exe: 6.1:7601.18151 retail
301.3788.465:<2014/5/19, 14:1:22>: Командная строка: CertUtil –config
hostname\caname -view
429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904DC, comment: AcceptSecurityContext error, data 52e, v1db1
429.2457.0:<2014/5/19, 14:1:23>: 0x31 (WIN32: 49): 8009030C: LdapErr: DSID-0C0904F8, comment: AcceptSecurityContext error, data 52e, v2580
812.494.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
805.233.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
804.293.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044)
705.429.0:<2014/5/19, 14:1:23>: 0x8009030c (-2146893044): Ignored!
705.2231.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
705.3007.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
1207.632.0: 0x80070103 (WIN32/HTTP: 259)
1207.705.0: 0x80070103 (WIN32/HTTP: 259)
443.258.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
316.1383.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
301.3792.0:<2014/5/19, 14:1:23>: 0x80070103 (WIN32/HTTP: 259)
301.3807.509:<2014/5/19, 14:1:23>: Состояние команды: Дополнительные данные отсутствуют. 0x80070103 (WIN32/HTTP: 259)
402.377.949: Конец: 19.05.2014 14:01 23.457s
any advise?
-- Stanislav.

Error 807/800 - using PPTP VPN from Windows 7/XP t...

Hi,
I wonder if someone could help me? I've had this issue for about 3 months now and I’m completely at a loss now. I’m trying to connect remotely to a Windows 2003 server via Windows VPN (PPTP) from home. This had been working fine for months (Draytek 2830n purchased in Feb 2011), there has been no configuration changes beforehand to cause the problem.
Problem
From Windows 7 PC – I receive Error 807 – “The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Please try to reconnect to the VPN server. If this problem persists, contact the VPN administrator and analyze quality of network connectivity”
From a Windows XP PC – I receive Error 800 - Unable to establish the VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection”
Steps Taken
I have carried out the following steps to trying and resolve the issue:-
Setup port 1723 on router(s)
Swapped out router for a completely different model
Upgraded firmware on Drayek 2830N
Tried various laptops and desktop PCs running Windows XP and Windows 7
Switched off local windows firewalls and Norton Anti-virus software
Opted out of BT Web Address Help service
Rebuilt the Windows 2003 Server and setup remote access again.
Tested the desktops and laptops that didn’t work at home from various locations (work, friends houses) and they work fine from another location (so this rules out the Windows 2003
The only thing that I can’t swap out is my BT line to the Exchange. Any ideas or suggestions would be extremely helpful. I’m thinking it must be a problem with my ADSL connection, perhaps the traffic is being blocked (for some reason) as I’ve explored all other avenues. I’m out of contract with BT now (although I don’t want to move ISP) I might end up having to if it solves the problem.
Many thanks for looking.
Steve

posted in error as you've already looked at BT web address help. Sorry
-+-No longer a forum member-+-

Cannot print wirelessly from Windows 7 (64 bit) laptop to Officejet 6000 Wireless (E609n)

The printer is a HP Officejet 6000 Wireless (E609n) and is connected via usb to a Windows 7 (64 bit) desktop and the laptop has Windows 7 (64 bit) loaded.
No changes were made that I'm aware of other than the usual Windows updates.
Server is offline is displayed next to the printer icon on the laptop when printing is attempted.
The wireless network test report shows no problems.
I have rebooted the desktop and printer with no success.
The laptop used to print wirelessly without a problem.

I am not sure the Officejet 6000 can have both the wireless and USB ports active at the same time. You could try disconnecting for the USB cable and then power cycling the printer and trying to connect wirelessly. If you have the desktop connected to a router that also provices wireless capability you could connect the desktop with the network connection.
One other thing you might consider is sharing the printer on your network from the desktop computer. Next on the laptop computer do the following: go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the computer and printer), OK, then select HP (not Hewlett-Packard) for the manufacturer and select the appropriate HP Officejet 6000 series model.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't connect to iMac wirelessly from Windows XP laptop

I am trying to connect my laptop with Windows XP wirelessly to my iMac for internet access.
I am able to connect to my iMac with my iPhone, iPod touch and another friends iPhone, and I have access without any issues. (Of course!)
I have deleted out the wireless accounts completely in the PC and rebooted. Tried again, and the PC sees my iMac's SSID. I click on connect and I input the network key as I have it set for WEP security. It takes a while to try to connect then it seems to time out.
On my iMac I have internet and file sharing enabled. I have also enabled Share files and folders using SMB (Windows).
I know that the PC is also able to connect to open networks without security.
My iMac is plugged into the modem, and I am using Airport for the wireless access point. I have unplugged the modem and let it sit for a few minutes then plugged it back in along with a restart.
I have tried to find information reading through various forums but the answer is eluding me. Help or a nudge in the right direction would truly be appreciated!

Welcome to the Apple DIscussions!
If the other wireless devices have no issues connecting wirelessly to your Mac's shared internet connection then it is most likely configured it properly, so the issue would be with the PC's configuration.
Have you tested the network without security? Does the PC connect and have access to the internet? If so then you may be using a WEP key that the PC cannot use. Non-Apple devices need a 5 character password for a 40 bit WEP key and a 13 character password for a 128 bit WEP key. Those instructions show in AirPort Options of the Sys Prefs/Sharing pane when you configure Internet sharing from Ethernet to AirPort.
Dah•veed

Windows Server 2012 Used: Error Message from Windows 7 PC: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator.

We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.

Hotfix Released here:
http://support.microsoft.com/kb/2916846

Tried to use iTunes library from Windows and Mac - lost everything

My iTunes Library is on a NAS (Dlink DNS-323) and until last night, I was only using it with my two macs (both running 10.5.6).
Last night, I wanted to use it from my Vista laptop so I looked up online and realized I can easily do it by renaming the "iTunes Library" file to iTunes Library.itl and double clicking from iTunes on Windows.
It seemed to work because when iTunes opened, I could see my playlists and I saw the message "updating library". I was afraid about the update to the library, so I just exit iTunes at the time thinking it would all be ok.
Guess not. This morning when I opened iTunes from my iMac, it opened with and empty library. I tried to do Library/Import Playlist and it did nothing but add the "standard" playlists to my library. I tried it a few times, with different settings (trying to re-rename the .itl back to just iTunes Library for example) and nothing worked.
Do I have any hope to recreate the library? From now on I will be backing up the NAS also, but meanwhile any ideas?

Your library file was being converted from Mac-based paths to Windows-based paths; apparently iTunes isn't courteous enough to work on a temp file while doing that conversion. You're not going to get it back. (And now you've learned the hard lesson of making backups of your important stuff
If the "iTunes Music Library.xml" file is still in one piece, you can use File menu -> Library -> Import playlist and point the file dialog to the xml file. Just about all the previous iTunes-only metadata will be imported (IIRC, about all you lose is some "Skip" info, and of course, Date Added will reflect the new date of import).

AirTunes not working over wireless from Windows 7

Setup:
Dell Inspiron 15 laptop (Windows 7 Home Premium)
Airport Express
Network:
ADSL router
+- Desktop PC (ethernet to router)
+- Airport Express (ethernet to router)
+- Dell laptop (wireless to Airport Express)
The Airport Express creates a wireless network (802.11n, 2.4GHz). The Dell laptop can't see the speakers. My Macbook Pro works fine. I've determined that the problem is that IPv6 isn't working over wireless. The Dell laptop can't see the Airport Express with the Airport Utility either.
When I plug the Dell laptop into the ethernet on the ADSL router, everything starts working fine. If you look at the interface information DHCPv6 is up.
Without the cable plugged in my wireless connection says:
IPv6 Connectivity: No network access
When a cable is plugged in:
IPv6 Connectivity: No internet access
(which is how it should be).
I am pulling my hair out here and have absolutely no idea why this won't work.
Firewall is completely disabled. The router also creates an 802.11g network but it's settings shouldn't matter (wireless isolation, which is turned off, and so on).
Any suggestions?

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

What does Outlook 2007 really use or need from Windows Desktop Search Engine

1) What will I lose if I don't intall this product
2) What will I gain if I use this product
3) How can I turn off all the non Outllook 2007 functions of this product
4) What other functions in Office 2007 are used by this product

Hi,
First of all, you need to have the following specifications for using Outlook 2007: -
256 MB RAM.
500 MHz Processor.
3.5 GB free hard disk space.
Microsoft Windows(R) XP with Service Pack SP(2), Windows Server(R) 2003 with SP1.
I hope that this may be helpful to you.
Regards
Ashish@V

What program can l use to make cards, presentation cards in my Mac? something equivalent to Corel Draw from Windows

I used to use Corel Draw from Windows to make cards, birthday cards, invitation cards, etc.
Now l want do the same in my Macbook pro, people told me Mac has something equal to Corel Draw. I wonder which program l can use to do that.

Mary --
I used PrintShop for years. Here's the link to the Apple Store page on "drawing."
http://store.apple.com/us/browse/home/shop_mac/software/design_publishing
Also "Print Explosion" is good. It's included in this link:
http://www.ehow.com/about_5206227_card-making-software-mac.html
iPhoto has a beautiful card making function, using your own photos. It's stunning really.
If you have iPhoto, it's free. If not, you can get it easily and cheaply via the AppStore.
You can also do photo books & calendars through iPhoto.
Also, Pages -- a program in iWork. I haven't used it, but those who have, love it.
http://www.apple.com/iwork/pages.
I'll bet that's the one you heard about.

WPA wireless connection

Hi,
I have a wireless connection problem. I am using S10e. Windows XP Professional (English) with SP3 was installed. Public/open wireless access points were detected and connected successfully. WEP wireless connection at home was fine. However, while configured WPA wireless connection, Windows do not allow me to enter user ID and password. (I am using the default Windows wireless configuration software.)
Remark:
1. Windows Update was run. All critical patches and latest drivers were installed.
2. In device manager of Control Panel in Windows, all drivers of devices were installed. (No exclamation mark next to devices).
Pls help.
Thanks
Regards,
Simon

Had the same or a similar problem on my S10
Excellent connection to my wireless router, but no way to enter WEP key.
Right click to icon on taskbar to "View Available Wireless Networks"
Click on "Change Advanced Settings"
Click on the "Wireless Networks" tab
Highlight your network and click "Properties". (You may need to delete your network here, Can't remember.)
At the "Association" tab, UNCLICK "This key is provided for me automatically"
Now type in your exact SSID network name, even if it already shows up (very important)
Type in your Network WEP key twice to verify.
I need to do this the first time I use any XP machine on my wireless network.
Its probably a setting in my D-Link wireless router. I don't understand these things, I just try and try.

Windows 7 Professional downgrade from Windows 8.1 Pro OEM

Hi,
I purchased new computers for a small business with Windows 8.1 Pro OEM licenses and disks. I was intending to install windows 7 Pro using downgrade rights but when I enter the product key that came with Windows 8.1 it gives me an error with "Invalid
Character".
How can I activate Windows 7 Pro using downgrade rights from Windows 8.1 Pro?
Thank you.
André Gomes

You cannot use a Windows 8.1 product key with a Windows 7 installation. You must "activate by phone" and hold on to speak with a Microsoft Activation
Specialist and explain your desire to invoke your downgrade rights to Windows 7. The Microsoft Activation Specialist will then review your request and if approved, will issue you an activation code for Windows 7.
Carey Frisch

Using WPA wireless from Windows XP

Similar Messages

Maybe you are looking for