Using wpl files on line--Not

I have some music I put together for a  party using different playlists.  I have made a webpage for navagation. I have the songs linked seperately but I also have several sets developed with seperate wpl files.  When I open the html page locally
it works fine.  The songs and the wpl file open Media Player as would be expected.  However, when I upload and try it online the individual songs work fine but the link to the wpl does not work.  It does not open Media Center as it does locally. 
I have edited the wpl file and messed with the internal links but that did make any difference.  Can a wpl file work online? Am I trying to do something that is not possible?
I also tried moving the whole set up to a seperate computer and the wpl files do not work.  The only way I can get them to work is if I recreat them on the host machine.  This does not make sense to me. am I missing something? 
Needless to say any ideas would be appreciated.
   

Hi BerwynEd，
The main issue is how to make Windows Media playlist online ,right ?
Here is a link may be useful to you :
Using Windows Media Player Playlist Files in Web Playlists
http://www.iis.net/learn/media/web-playlists/using-windows-media-player-playlist-files-in-web-playlists
Best regards

Similar Messages

  • In CS4 Use of File Place Does Not Center Images

    I have been using CS3 for about 1 1/2 years, so of course had to give CS4 a try. I downloaded the trial. I immediately had an issue with File > Place.
    I often use File > Place to add additional items into a document. I believe the expected functionality of File>Place is that the file should then be centered in the document.
    Here is what I have done:
    + Create a 12"x12" document at 200ppi (I have also tried to create a document at 2400x2400 pixels)
    + Use File>Place to add a square 2400x2400 pixel image (JPG file) into the document
    + The added layer is now offset ever so slightly in the new document.
    + Further observation shows that the horizontal reference point is at 1202 (screen shot attached), thus creating an offset from center. I change it to 1200 and sure enough the paper is centered perfectly. I thought maybe changing it once would make it the same next time, but that is not the case.
    + When I used the File>Place command, I was zoomed out (25%), and the entire image was viewable on screen. If I zoom out further, say 8.33%, the offset is 1206.
    I am able to duplicate this on two different computers with the following configurations:
    Computer #1
    + Windows XP Professional Version 2002 SP2
    + AMD Athlon 64 X2 Dual Core Processor 6000+ (3.01GHz)
    + 4GB RAM
    + nVidia GeForce 8600 GT, driver version 6.14.11.5819
    Computer #2
    + HP Pavilion dv9843cl Laptop
    + Windows Vista x64 SP1
    + Intel Core Duo processor T8100 (2.1 GHz)
    + 4GB RAM
    + nVidia GeForce 8600M GS with 512MB DDR dedicated graphics memory, ForceWare version 167.43
    + Video BIOS version: 60.83.4f.00.22
    Operating System: Windows XP Professional
    Browser: Firefox
    Video display card / driver version: nVidia GeForce 8600 GT, driver version 6.14.11.5819
    Screen shot (not sure if this works in these forums):
    [IMG]http://cdn-1-service.phanfare.com/images/external/1466784_1419796_53071200_Full_3/0_0 _41325929f3d5a1780af10559af98d829_1[/IMG]
    Any ideas?????
    ~ Kathleen

    "Place" ..... It is not all the easy to understand how place works without studying its behavior.  Often it will work in a way your not expecting if you do not understand how it works. There is a setting in Photoshop preferences Resize Image during Place. Un Checking this setting does not mean the image will not be resize nor does checking  this setting mean that it will be resize. On top on top of that the seems to be something in Photoshop on My system that keeps changing the setting to the checked state.
    What the heck am I writing am I trying to make this worse.  No I'm not.  To prove that I first tell you it is very easy to center position a placed layer in an action after the Place step add a step select all the two layer>Align layers to selection>Horizontal Center then vertical center. The deselect...
    Place....
    There is a lot going on remember in Photoshop a Layer can be any size  Larger/smaler/same as the canvas and can have any aspect ratio. If the placed image has more pixels them a canvas side size and the preference is checked the placed image will be transformed to fit within the canvas size. If not checked the placed image will transformed to the same dpi resolution so no pixels will be changed.    The only time a place image is not transformed is when the the preference is not checked and the placed image file has the same dpi as the current Photoshop Document.  In this cast the image is placed in at 100% size be it smaller/larger/same as canvas size.

  • When using a path, jagged lines, not smooth lines, uneven lines

    I am using a Mac, photoshop CS5
    I created a path with Curves with the pen tool.
    filled it in with a color light blue.
    than I use the paint bucket to change it to dark blue.
    This is when the curved lines become jagged, not smooth, uneven.
    also I would like to use this as a mask, but with bg color changing from time to time.
    any solutions?
    GC

    Enable the retain transparency option when applying fills or use alternate colorization methods like using adjustment layers or creating the layer as a shape layer in the first place. Not sure what you mean by your mask thingy. You simply load the selection by Ctrl+clicking on teh layer thumbnail. this works no different than with any other layer.
    Mylenium

  • Why can't I open file that I saved 'save as'?  When I go to use the file, it does not allow me to use???

    I have Adobe X.

    Hi jgrubbs760,
    Do you get an error message when you try to open the file? Do other files open for you?
    Please provide a little more information about what's happening, and we'll try to get this sorted out.
    Best,
    Sara

  • Warning: NetGear ReadyNAS major bug when using AppleShare File Protocol

    I own a large number of NetGear (formerly Infrant) NAS devices. After NetGear bought the company, they came out with a new version of the embedded OS of those devices that looks like it is mostly just a cosmetic update that changes the name Infrant to NetGear.
    Unfortunately, it also introduces a very serious and reproducible bug. When you mount one of the NAS boxes running the new version of the OS under AppleShare, a file copied to the NAS box always gets today's date as its creation date. Strangely, if you copy a folder, the folder date is set correctly to the original creation date of the source folder, but the files contained inside of it lose their original creation dates.
    This bug occurs ONLY under the new version of the OS (4.00), not under the previous version (3.01). It occurs both under OS X 10.4 and 10.5.
    I have spent considerable time on hold and on the phone with NetGear technical support, and they claim this is a problem with the AFS file protocol. I don't know how they can make this claim when quite evidently everything works just fine under the previous version of their own software, but the gentleman on the phone basically told me something to the effect of "nobody uses AFS anyway, so why should we care".
    If you are considering a NAS box, you may want to hold off on purchasing a NetGear device for the time being. And using Samba file sharing is not really an option either, because that severely limits your file naming possibilities.
    If Apple is reading this, I hope someone can contact people "higher up" within NetGear to fix the problem.
    Michael

    appreciate if someone can assist with my errors as mentioned in my first post.'
    Thanks.

  • Can't use my files in file manager

    hello. I find it weird and quite irritating that i can view all my files in file manager. But when i actually want to use a file they are not available.
    Solved!
    Go to Solution.

    The "tracker" thing maintains a database of all the media files on your device.. for example, artist, album, trackname, length, bit rate of music files... resolution of photos stuff like that.
    This is how the phone can quickly show you a complete list of photos, it lists the database, rather than scanning the phone for suitable files (which takes much longer)
    the tracker indexer process, iirc, also watches when files get added to the phone (NOT via USB.. I'll get to that in a mo) When a file gets changed / added, the tracker is woken up and examines the new file adding it to the database..
    If the tracker database becomes corrupted, everything gets a bit screwy
    When you use USB storage to copy on data, the tracker can't watch as it happens.. instead when you unplug the phone from your PC, it has to scan for new files.. its slower, but normally just as effective..
    the -r option instructs the tracker system to bin the old database and start from scratch.. it'll go and rescan your mass storage (and SD card if you have one) and put the stuff back in the database..
    If you have a broken file, there's always the risk that when it tries to "index" the file, it messes the database up and you end up with no files showing again..
    the -r is safe, especially since you can't see any files at the moment..
    it is NOT the same as rm -r
    it is an abbreviation for --hard-reset as in delete the data and reset.. but your files them selves will not be altered at all..
    How's it going? Looking better now?

  • Installing and Configuring Oracle stand alone grid  Using Response Files

    Hello ,
    I am looking for some help if you have done the oracle restart (standalone grid) installation using response file , when i tried to install using response files it is not creating the ASM disks , so i might be missing some steps . Can you please share if you have done this installation of if you have a right document to do this .
    Version i am using 11.2.0.3
    OS : Linux
    Thanks
    Venkat

    Use the following in response file, replace oracle_base,oracle_home,oracle_hostname,diskgroup name,redundancy,disks as per your
    environment
    oracle.install.responseFileVersion=/oracle/install/rspfmt_crsinstall_response_schema_v11_2_0
    ORACLE_BASE=/u01/oracle
    ORACLE_HOME=/u01/product/11.2.0/grid
    INVENTORY_LOCATION=/oracle/install/oraInventory
    ORACLE_HOSTNAME=rhel5
    oracle.install.option=HA_CONFIG
    SELECTED_LANGUAGES=en
    UNIX_GROUP_NAME=dba
    oracle.install.asm.diskGroup.name=DATA
    oracle.install.asm.diskGroup.redundancy=EXTERNAL
    oracle.install.crs.config.autoConfigureClusterNodeVIP = false
    oracle.install.asm.SYSASMPassword=test
    oracle.install.asm.monitorPassword=test
    oracle.install.asm.diskGroup.disks=/dev/oracleasm/disks/TEST01,/dev/oracleasm/disks/TEST02
    oracle.install.asm.diskGroup.diskDiscoveryString=/dev/oracleasm/disks/*
    oracle.install.asm.OSDBA=asmdba
    oracle.install.asm.OSOPER=asmoper
    oracle.install.asm.OSASM=asmadmin
    oracle.install.asm.upgradeASM=false
    oracle.install.crs.config.gpnp.scanPort=0
    oracle.install.crs.config.clusterName=
    oracle.install.crs.config.gpnp.configureGNS=true
    oracle.install.crs.config.gpnp.gnsSubDomain=
    oracle.install.crs.config.gpnp.gnsVIPAddress=
    oracle.install.crs.config.autoConfigureClusterNodeVIP=false
    oracle.install.crs.config.clusterNodes=
    oracle.install.crs.config.storageOption=
    oracle.install.crs.config.sharedFileSystemStorage.diskDriveMapping=
    oracle.install.crs.config.sharedFileSystemStorage.votingDiskLocations=
    oracle.install.crs.config.sharedFileSystemStorage.votingDiskRedundancy=NORMAL
    oracle.install.crs.config.sharedFileSystemStorage.ocrLocations=
    oracle.install.crs.config.sharedFileSystemStorage.ocrRedundancy=NORMAL
    oracle.install.crs.config.useIPMI=false
    oracle.install.crs.config.ipmi.bmcUsername=
    oracle.install.crs.config.ipmi.bmcPassword=
    oracle.install.crs.config.privateInterconnects=
    oracle.install.crs.config.gpnp.scanName=
    oracle.install.crs.upgrade.clusterNodes=

  • Anyone have experience using high-res files (eg line art) in Aperture?

    As I found at http://discussions.apple.com/thread.jspa?threadID=1741287&tstart=0 it seems that Aperture will choke on files over a certain size. I'll grant, I tried something that is outside the scope of Aperture---I tried using it to store a workflow starting with a scan rather than a photo. The scan is higher resolution than most digital photos (as line art must be).
    Does anyone have any experience with high-resolution photos or scans? I'm talking over a hundred MB, possibly upwards of a gigabyte. These are precisely the sort of files that I want to create lower-res versions for specific applications and have them be linked to the master file.

    I tried to use Aperture with my line art scans in the early versions of Aperture, but gave it up because Aperture did not seem to handle the file size.
    Instead I use another workflow for my artwork, Bridge, Photoshop, Illustrator and Version Cue in combination with Extensis Portfolio. This is a very pleasing solution for me and I would recommend it to others to try out as well.
    For me, Aperture is used for managing and adjusting my photographs.
    Regards
    Paul K

  • Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10

    Any help is appreciated.  Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ...
    using photoshop elements 10 on imac with OSX 10.8.2
    Thx

    Have you recently updated your Operating system? Please try repairing permissions for your hard disk.
    Please check the help document to know more about repairing permissions http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html#main_Solutio n_3__Repair_Disk_Permissions

  • Spreadsheet component - bottom grid line not displaying in swf file

    Hi,
    I'm having an issue with the spreadsheet component. I'm using the "Ignore blank cells in Values" option on the behavior tab. This works fine. The problem I'm having is the bottom grid line in the spreadsheet table is not displaying in the swf file. The bottom grid line displays correctly in Preview mode....but is not displaying in the swf file. Anyone have any ideas on why?
    Thanks

    I'm not sure if I've interpreted your response correctly.  Our entire dashboard app is built on the swf files being called from the URL buttons.  We are not using HTML files.  Are you saying that if I do a file export to HTML that the swf file generated from this will display the bottom grid lines?
    I noticed that the spreadsheet component grid lines display correctly in the swf when not checking the ignore blank cells option in the behavior tab.
    So what would be our options here.....either uncheck the display grid lines for the spreadsheet component to not display the grid lines at all, or do not use the ignore blank cells option in the behavior tab to display a fixed number of rows each time?
    Thanks for the response, Matt.

  • Feature request : import of multi-line notes in CSV or tab-delimited file

    This is a feature request to the AddressBook development team:
    Following a question posted here and asked to support (thanks to Barry and Julia from ADC), it turns out that AddressBook is not ready yet to import multi-line notes from a CSV or tab-delimited file.
    I would like to kindly suggest the AddressBook development team to update the import methods for such flat files to parse the text of what is assigned to the Notes field, and convert documented escape sequences to their pre-determined corresponding special character.
    I would think that the following would be pretty easy to implement, and easy for the targeted audience (enthousiasts power-users and up) to remember:
    "\n " : mark a new line (same as ^p in Word)
    "\t " : replace by a tab
    I would keep the trailing space to avoid problems with DOS-type file path problems.
    and of course...
    "\\n " and "\\t " for whoever would want to import notes about \n and \t
    For example, in a Notes column, the text:
    "Escape sequence \\n :\n move the text to a new line\n \n while escape sequence \\t :\t move the text to the next horizontal tab"
    would give the following (just consider text between <Note> marks):
    <Note>
    Escape sequence \n:
    move the text to a new line
    while escape sequence \t: move the text to the next horizontal tab
    </Note>
    Thanks for reading...
    Frédéric Denis

    The developers do not necessarily read these USER discussion pages. If you want to make suggestions and know they will be read (which is at least a step towards implementation) use the OS X feedback page.
    AK

  • File.exists() is not accurate on smb2 network share (use WatchService?)

    Hi,
    According to this document: SMB2 Client Redirector Caches Explained File.exists() is not accurate on a smb2 network share. I am not able to change any register settings, so I want to deal with it. According to the document there is an API to get the notifications from the file system. I assumed that the WatchService is the Java implementation of this API. Am I correct?
    I started with the WatchDir example from the jdk samples and stripped it a bit. I only need to know when a file is created and delete (I don't care about file modifications). For testing I have added new File.exists() when a new event has been triggered. I also start a separated Thread which test the file existence also. When I don't start this separated thread the file exists returns true immediately. When the extra thread is started it is not accurate any more. I need a more accurate file.exists check in the whole application and all running threads.
    The output for my test case is this:
    FileExistsThread: subdir\test.txt == false
    watch registered for dir: subdir\
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    WatchDir event: ENTRY_CREATE: test.txt
    WatchDir: subdir\test.txt exists == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == false
    FileExistsThread: subdir\test.txt == true
    FileExistsThread: subdir\test.txt == true
    FileExistsThread: subdir\test.txt == true
    FileExistsThread: subdir\test.txt == true
    As you can see the file test.txt  is created on line 9. The FileExistsThread have seen it on line 20, (at least 10 x 300 ms later).
    For testing I have used 2 Windows 7 pc's (with smb2 enabled which is default). The working directory must be on the remote pc and the file test.txt must be created (or copied from another folder) on the remote pc (not using the network drive, but on the pc itself).
    Here is my test code:
    package nl.test.main;
    import static java.nio.file.StandardWatchEventKinds.ENTRY_CREATE;
    import static java.nio.file.StandardWatchEventKinds.ENTRY_DELETE;
    import static java.nio.file.StandardWatchEventKinds.OVERFLOW;
    import java.io.File;
    import java.io.IOException;
    import java.nio.file.ClosedWatchServiceException;
    import java.nio.file.FileSystems;
    import java.nio.file.Path;
    import java.nio.file.Paths;
    import java.nio.file.WatchEvent;
    import java.nio.file.WatchKey;
    import java.nio.file.WatchService;
    public class WatchDir
      private final WatchService _watcher;
      private final String _dir;
      public WatchDir( String dir ) throws IOException
        _dir = dir;
        _watcher = FileSystems.getDefault().newWatchService();
        Paths.get( dir ).register( _watcher, ENTRY_CREATE, ENTRY_DELETE );
        System.out.println( "watch registered for dir: " + dir );
      public void run()
        try
          while ( true )
            WatchKey key = _watcher.take();
            for ( WatchEvent<?> event : key.pollEvents() )
              WatchEvent.Kind<?> kind = event.kind();
              if ( kind == OVERFLOW )
                continue;
              @SuppressWarnings( "unchecked" )
              WatchEvent<Path> ev = (WatchEvent<Path>)event;
              Path fileName = ev.context();
              System.out.println( "WatchDir event: " + kind.name() + ": " + fileName );
              if ( kind == ENTRY_CREATE )
                String realPath = _dir + fileName;
                System.out.println( "WatchDir: " + realPath + " exists == " + new File( realPath ).exists() );
            key.reset();
        catch ( ClosedWatchServiceException x )
          return;
        catch ( InterruptedException ex )
          return;
      public static void main( String[] args )
        Thread t = new Thread( new Runnable()
          @Override
          public void run()
            try
              while ( true )
                String filename = "subdir\\test.txt";
                boolean fileExists = new File( filename ).exists();
                System.err.println( "FileExistsThread: " + filename + " == " + fileExists );
                Thread.sleep( 300 );
            catch ( InterruptedException e )
              e.printStackTrace();
              return;
        t.start();
        try
          new WatchDir( "subdir\\" ).run();
        catch ( IOException e )
          e.printStackTrace();
    Any idea's?
    Thanks,
    Olaf

    If you donot have access to note 45172.1 as specified by Laurent Schneider.
    Snippet from note
    a. Mapped Drive : To use a mapped drive, the user that the service starts as
    must have setup a drive to match UTL_FILE_DIR and be logged onto the server
    when UTL_FILE is in use.
    b. Universal Naming Convention : UNC is preferable to Mapped Drives because
    it does not require anyone to be logged on and UTL_FILE_DIR should be set to
    a name in the form :
    \\\<machine name>\<share name>\<path>
    or
    "\\<machine name>\<share name>\<path>"

  • Out-file to a line not the end

    Hi guys,
    I have a script problem I'm trying to resolve. I want it so that a user can edit a single line of a txt tile. Is this possible using the out-file command?
    "out-file 'C:\temp.txt' -append -inputobject $user_input"
    This will add the line to the end of the file, but that's not what I want it do. Suppose I have a text file that looks like this.
    1.Hello
    2. Dad
    3. Mum
    and I want to edit it so hello is now bye. Why can't i just do:
    "out-file 'C:\temp.txt'[0] -append -inputobject $user_input"
    When I run this nothing happens. Any ideas?

    The heading and content description is little confusing
    are you looking for code which write on top of the line
    Eg:
    Line1 - This is user input value
    Line2
    Line3
    $content = Get-Content C:\Temp\See.txt
    $userinput = Read-Host 'User Value'
    $userinput | Set-Content C:\Temp\See.txt
    $content | Add-Content C:\Temp\See.txt
    Note: As
    Gareth Fletcher<abbr
    class="affil"></abbr> suggested it's not possible using Out-File
    If you want to replace as you mentioned in description you can use Venu's code
    Regards Chen V [MCTS SharePoint 2010]

  • Is there a way to send a large video file through email, not using websites?

    Hey guys,
    Just wondering if there is an easy way to send a large video file through email, not using websites such as yousendit.com.
    If anyone knows please respond, would be greatly appreciated! Thank you

    No there isn't. Most all Email providers, whether your ISP or some other provider like Google, Yahoo, Microsoft with their Outlook.com or Office365 and Apple's own iCloud system, have a linit on the max size a email can be. Most are around 10MBs some slightly larger but if the vieo you want to send to someone it larger than that you will have to upload it to a website and then have the people you want to view it download it from that website.

  • I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
    People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
    ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
    Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
    So IMO we can divide image processing into:
    operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
    operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
    When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
    Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
    ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
    RP

Maybe you are looking for