Using WRE to send a wireless signal rather than expand a signal

Hi all, I'm hoping you might be able to help me out on this. I have a Linksys router and a WRE. The router does not have wireless, but i was curious if it's possible to trunk the router to the WRE, and have it send out a wireless signal, rather than pick up on and expand an existing signal. If so, what would i have to do to achieve this.
Thanks!

If the router does not have Wireless then you cannot use your Range Expander...In other word's, what you want to establish is not possible with the Range Expander...
However, this is possible with a Wireless Access Point(WAP54G)...You can connect an Access Point(WAP54G) to your router to send a Wireless Signal...

Similar Messages

  • How do I use my iSight camera through msn messanger rather than iChat?

    How do I use my iSight camera through msn messanger rather than iChat?

    Hi
    MSN for mac any version does not do video.
    aMSN and Mercury do video but no audio.
    if you are trying to video with a PC you will be better off using Skype
    Mac version http://www.skype.com/download/skype/macosx/index.html
    PC version http://www.skype.com/download/skype/windows/helloagain.html
    Tony

  • Wat is the use of sid in extended star schema rather than linking masterdat

    hi bw gurus,
    wat is the use of sid in extended star schema rather than linking masterdata with dimention tables?
    thanx in advace,
    i will assign points,
    srinivas

    hi,
        the sid are used instead of the data in order to avoid the redunduncy of data.
    and reduce the datastorage size.
    the data will be present in the sid table and the data is linked used the corerponding sid in the dimension.
    regards

  • TIME CAPSULE NOT SENDING A WIRELESS SIGNAL

    I am setting up a new time capsule machine 500m, and i have the green light on. have existing buffalo router connected to a dsl modem. the buffalo hands out via an ethernet connection to the wan port of the TC. i have an ethernet cable plugged into the TC and i get internet signal via hardwaire, but i can't see the TC wirelessly. when i open the airport it is not in the list of available wireless networks. i have tried resetting the TC, but no luck,,,, can anyone help shake this down?

    I need a little more info to help troubleshoot this one....
    Does the Buffalo router send out a wireless signal too? Is it in default configuration and can the computer connect to the internet through the router by simply plugging in a cable or choosing the wireless network?
    You'll have to connect wired to the TC for the next questions. In Airport Utility>Time Capsule manual setup>wireless tab, what is the setting for wireless mode & radio mode? And then under wireless options, is the box checked for create closed network?
    Now go to the Internet tab and what is the setting for connection sharing?

  • When I send a text message, the iPhone 4s sends it via email rather than to the mobile phone number I wish to message.  How do I change that default?

    My wife (who has a Droid) asked me to text a photo to her.  I went to Message on my 4s, selected my wife as the target for the text, selected the photo, and sent the text.  Rather than appearing on her mobile phone, the text went to her email.  When I selected my wife as the person I wanted to text, I was not given any choice of the target phone number or email address...it just defaulted to her email and did not tell me that is what it was doing!  I did find a solution, but it's more complicated.  I have to go to Contacts, select my wife, and then I'm given a choice of how I want to send the Message.  Why doesn't the iPhone do this in Messages in the first place?

    I am not sure what you mean.
    Do you mean the From field?
    You can change it by tapping it, it will give you options based on the other email accounts set up.
    You can set a default account here:
    Sttings > Mail, Contacts, Calendars > scroll down to the Mail section & you will see Default Account. You can change that to your gmail account.

  • Please send me ONE reply rather than two identical copies of that one reply

    Instead of sending me just ONE email as per "subscriptions," they are sending me TWO identical copies of the email. So if two people send me one reply each, A and B, I end up getting FOUR replies: AA, and BB. Yikes!
    I would like to receive just ONE copy. I tried deselecting all of my subscriptions, thinking that I could start fresh and that the problem would correct itself, but the problem persists.
    Please, send me only ONE copy rather than two copies.
    Thanks mucho.
    — Lorna in Southern California

    This web page will help you: http://samsoft.org.uk/iTunes/grouping.asp

  • Using Proposed Fields  - Flat File to DataSource rather than InfoObjects

    Hi Experts,
    We are doing one test project in which our source data is Flat Files. We want to load into DSO and InfoCube. Then our next step will be MultiProvider and produce reports on MultiProvider. Can you please clarify?
    From Flat File to DataSource(PSA) we are using Proposed Fields rather than InfoObjects to Transfer Data.
    From DataSource to InfoProvider we are using InfoObjects to Transfer Data.
    My question to you is, is it correct to use Proposed Fields rather than InfoObjects from Flat File to DataSource Transfer?
    Thank you,
    Srini.

    Hi, check in Proposal tab, you need to check if the field
    types and lengths are correct (If they match the file you have or will receive).In some cases, the proposal will not be accurate, and you will need to adjustthe fields type and length on the fields tab. This is the case with the field length and type.
    Thanks
    Reddy

  • Dock uses icon of first item in folder rather than folder's own icon. Fix??

    I have a folder with its own custom icon.  When I drag that folder to the right hand end of the dock (mine is set horizontally), Mavericks insists on setting the dock icon for that folder to the icon of the first item (alphabetically) in the folder, rather than the icon for the folder itself.  How do I fix this??
    Thanks!
    DM

    Hi William,
    Thanks for your reply. It's already displayed as a folder, but this has nothing to do with how the contents are displayed when I click the icon in the Dock. I'm talking about the icon that the Dock shows for my folder. Changing the display options has no effect on that.
    If I drag a new, empty folder from the Finder to the Dock, it has the standard OS X folder icon in the dock.  But as soon as I drag things into that folder (in the Finder), the dock icon changes to the icon for the first item in the folder. Even if I paste a custom icon into the folder's Get Info window in the Finder, the Dock ignores this and uses the icon for the first item in the folder.
    DM

  • Using JSP based PCR forms in ERP2005 rather than Adobe interactive forms

    We are currently upgrading from EP5.0 business package 50 to EP7.0 with ERP2005 (ECC 6.0) and are trying to configure our existing custom personal change request forms with our scenarios.
    Originally our custom PCR scenarios where JSP iView and we are hoping to use these again as part of ERP2005. The customisation seems to support this – transaction QISESCENARIO for each scenario you have the option ‘Entry Type in Web’ and you can set it to ‘Entry Using JSP iView’. We can configure the internet link and the portal component also for our JSP view.
    When we try to run this however we get the exception ‘No Adobe Form Is Assigned to the Scenario’. After a quick debug it seems that you always need the Adobe form to be configured.
    None of the documentation for ERP2005 suggests that you can use anything other than Adobe forms, which contradicts the configuration in QISESCENARIO.
    The ISR cookbook (written July 2004) details the creation and configuration of JSP request forms but not what versions they are compatible with.
    Developing you own PCRs for ERP2004 (Can’t find an ERP 2005 version) does not mention JSP iViews at all.
    The release notes for ERP2005 don’t give this a specific mention.
    So, my question is are the use of JSP based request forms permitted with ERP2005 ?

    Hi Phil,
       Interesting - I have a similar issue.  We want to use the Request for Transfer scenario in ERP 2005, but it has not been developed in Adobe forms by SAP yet (it isn't available in 2004 either)!  So, we have decided to use the old JSP PCRs instead.
    Your issue is probably because you're using the same 2005 iviews to create your PCRs.  The 2005 PCR iviews are written in WebDynpro, and appear to assume that each one will be an Adobe form!  If you assign the old PCR iviews to your manager (give them the old MSS role under Migrated Content->EP5.0... in the pcd if you have it installed), you will be able to create a PCR with the JSP forms (regardless of the "Entry in Web" setting in QISRSCENARIO).
    The next issue is the approval.  In 2005, transaction SWFVISU has task TS50000075 configured as Java Webdynpro.  You'll need to change that to iView, and specify ID = com.sap.pct.hcm.isrdispatcher.default.  I'm following the UWL item type guide for this at:
    http://help.sap.com/saphelp_nw04s/helpdata/en/b1/cc1357eead454bb144face4a66be7d/content.htm
    Having said this, my approval is not working!  The item type has clearly changed, because the workitem name is no longer a hyperlink (rather annoying), but when I hit the "Launch Task Page" button (default name I think) I get the error:
    "Unable to perform action because the system returned an invalid URL"
    I can't see this "invalid url" anywhere in the logs, so I can't see where it is getting it from, or what path, etc I'm meant to put!  In your old system, what did you have as the "Server for ISR call" under "Additional Data for Scenario" in QISRSCENARIO?  Also, what did you have in the "URL" box that appears under the Additional Data for Scenario button when you change the Entry Type to JSP?
    Many thanks,
    Russell.

  • Is there any specific docs for using iPlanet v5.1 as MTA only rather than as a MTA/IMAP server?

    We currently use PMDF on a couple of dedicated boxes as MTA's for our site. Licensing for iPlanet v5 is a little more favorable and a number of the former PMDF developers now work for iPlanet/Sun and these folks were great to work with. I'm reading the admin guide right now but am curious if there is more out there? Or if anyone is doing what I'm looking at doing?
    al

    There aren't any documents for installing the MTA portion of IMS only. In fact, out of the box, you can't install just the MTA in IMS 5.1. It may be possible in IMS 5.2.
    Currently, you have to install the MTA and the store (which you can later disable). Then you have to configure your mapping and dirsync and so on for the MTA.
    MTA configuration isn't drastically different in IMS (though I'm not familiar with SIMS or PMDF previous to IMS) so you will probably feel very comfortable with it after a read through the Admin Guide and the Reference Guide.
    If you have a specific question about something in the process, someone could probably provide a little more detail.

  • Can you use other disk drives on mac mini rather than the superdrive?

    I have just purchased a mac mini and am exploring the various options available to me regarding disk drives?
    Are you limited to just the Mac Superdrive or can you use other makes and models?
    i read somewhere that some drives will only let you install software and not let you Burn Music or play games?
    Is that correct.
    Mike Price

    I have three firewire burners daisy-chained to the mini for ripping my CD collection.

  • Using Mac to monitor family web traffic rather than A.Extreme

    I have two young sons who have various PSP, PS3, Wii and Nintendo DS Consols, which I want to make wireless with my new Airport Extreme. I colleague has told me I can set up a network via my Mac so I can monitor all their internet usage, plus all the websites they go to goes via my Mac and not directly through the AE.
    Is this true? If so, how can I set it up.
    Many thanks in advance.
    Matt

    I'm not sure I understand... as far as I can tell, after enabling Family Sharing and my wife and I now having different iCloud accounts on our phones, Photo Stream does not appear to be shared between us any more. It appears that only the "Family Photos" album is shared, and we have to manually add photos and videos to that.
    One of my favourite features of sharing the same iCloud account across multiple devices was that Photostream synced all our family's photos across all devices, no matter who took them. This appears to be a missing feature in Family Sharing for now -- perhaps Apple wasn't aware this was something people were doing?

  • When using 2 printers at 2 locations. Rather than make sure the correct printer is shown when I print is there a way to make one change when I change locations?s there a way to

    I have 2 residences each with a printer. When I move from one place to another and try to print I always have to make sure the correct printer is shown in the print window. What can I do to make one change on my MacBook Pro when I change locations so I am not bothered with this nuisance problem?

    There was a way from OS9 location manager to set a default printer for any given location. This is not the case in OSX.
    You can however, easily change the default printer in Terminal.app with lpoptions -d PRINTERNAME. To view all the printers type lpstat -p. Keep in mind that the name in lpstat -p may be a little different than the name in Printer Setup Utility. You must use the lpstat -p, PRINTERNAME when changing it in Terminal.app. Of course, if the names are the same, you don't need to worry about it.
    PowerBook G4   Mac OS X (10.4.9)   MacBook Pro

  • How can one use the physical memory of our system rather than virtual memory while running Labview?

    We have a Windows NT system with 2 Gb of physical memory and would like to utilize the RAM fully using Labview. What usually occurs is that Labview uses a tremendous amount of page file space while a majority of the physical memory is unused. Is there a way to configure Labview (or our system) to overcome this problem? It seems that our processes would be much faster if they were mainly using the physical memory. Is it possible to trick the system, by creating a RAM disk and allocating this as virtual memory space?

    > We have a Windows NT system with 2 Gb of physical memory and would
    > like to utilize the RAM fully using Labview. What usually occurs is
    > that Labview uses a tremendous amount of page file space while a
    > majority of the physical memory is unused. Is there a way to
    > configure Labview (or our system) to overcome this problem? It seems
    > that our processes would be much faster if they were mainly using the
    > physical memory. Is it possible to trick the system, by creating a
    > RAM disk and allocating this as virtual memory space?
    LabVIEW the application doesn't know anything about physical versus
    virtual memory. LV asks the OS for general purpose memory and goes
    from there.
    Drivers like DAQ and IMAQ will have a combination of general user
    memory and page lo
    cked physical buffers.
    I'm not up on the details, but this is something that the OS is in
    control of, so that is where you need to look for the solution. One
    of the things to look at is the disk cache. By default, I think that
    NT takes a percentage of the RAM to use for disk cache. With that
    much RAM, this is probably unnecessary and is using too much.
    Similarly, the OS may be attempting to keep the working set size
    to a fraction of the total RAM to reserve space for other things.
    It doesn't make sense to me, but then I don't work for MS.
    Greg McKaskle

  • Wireless Network rather than phone carrier

    Hi. I have organised my iphone to accept my wireless internet, however when I download Apps or view You Tube etc it reverts to my internet provider Telstra. How do I make the wireless take precedence over the phone carrier?

    Hello Cocky2,
    Welcome to the Discussions Boards.
    The iPhone software is configured to select WiFi before the cellular data network.
    If your iPhone switches to the cellular network when you try to access data, it is most likely because the iPhone is not actually connected to the WiFi network.
    Once you join your WiFi network, go to Settings > WiFi and tap on the blue arrow to the right of your network. If the IP Address is not present or begins with 169.254, then your WiFi router has not provided a working IP Address to the iPhone.
    See the following thread for some tips on getting your WiFi network to allow the iPhone to join it successfully:
    http://discussions.apple.com/thread.jspa?threadID=1914161
    Also, see this article:
    http://support.apple.com/kb/TS1398
    Hope that helps,
    Charles H.

Maybe you are looking for