USING XML FOR EXCHANGING BUSINESS DATA AMONG APPLICATIONS

HI EVERYONE
I NEED YOUR ASSISTANCE. I AM DOING A PROJECT
ON THIS TOPIC BUT HAVE GOT STACK AS TO WHERE
TO START.
DO YOU HAVE SOME IDEAS?

OTN has some sample apps that might interest you:
[list][*]B2B with XML
[*]WebStore B2B Exchange
[*]XML Flight Finder
[*]Customizing Web Content
[list]
Regards,
-rh

Similar Messages

Why can't I use iCloud for exchange of data - like I could with MobileMe?

Why can't I use iCloud for exchange of data - like I could with MobileMe?
Oder auf Deutsch, warum kann ich keine Daten mehr in iCloud speichern bzw. zum Austausch bereitstellen, wie das bei MobileMe noch ging?
Danke für die Hilfe
Thanx in advance!

The purpose of iCloud is to sync data between your devices.
There is no "web address" to your files and no way to "share" them with others (except photos).

HT2589 We have purchase 5 apple minis and would like them all on one account. That way we can monitor the use of these units. they will be used strickly for a business application. can I use one account in itunes or must i have multiple.

We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units. They will be used strickly for a business application. Can I use one account in itunes or must i have multiple.

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Can't i use xml schema and oledb data connection at the same time?

Hello to all and thanks in advance.I use xml schema and oledb data connection at the same time and the problem is that when I try to export the xml, the outcome is not what i expect.Without the oledb connection everything is ok (just the schema) and the xml complies with the schema.
Can't i have both schema and oledb and the exported xml be as i want it?

You can use both at the same time, but not gor Internet access if that's what you're asking.
Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
Sorry.

Sender file adapter - Can I use *.xml for the file name

Hi Gurus,
I have some interfaces where I need to pick the file from a directory. The name of the file will have Data<i>time stamp</i> as the naming convention. Can I use *.xml to pick up my files from this directory?
The help.sap.com documentation says that we can use this naming convention.
<b>
● File Name
Specify the name of the file that you want to process. The name can contain placeholders (*, ? (placeholders for exactly one character)) so that you can select a list of files for processing.
</b>
I tried using *.xml for my file name in the communication channel, XI is not picking up this file.
Please let me know if you have the solution.
Thanks
Kalyan

Murthy,
Thanks for the reply.
I am using GuildFTP tool as my FTP server. In this tool, all the permissions were given for the file to pick up.
The status of the file is good.
Where in the file adapter configuration I have to select 'Read-only'?
The file adapter is working perfect with the exact name of the file.
Thanks
Kalyan

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remo

Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil.

"The Ipad is on a short cable to my projector."
Get a longer cable?

Interface Using BAPI for Uploading shipment datas

Can any1 send me the example code for Inbound Interface using BAPI for Uploading shipment datas.please kindly send me the programs which u using with BAPI

Hi
Except hiring (or new joinee) for all other actions you can use below Function Module.
HR_INFOTYPE_OPERATION.
~~~Ganesh Kumar K.

Can I use Skype for my business?

Hi,
I have a SKype number and been using it for my business for a year already. Today I've received an email from Skype saying that I can't use Skype for commercial purpose. I'm confused because I've seen so many people saying that they use Skype for their business. Here's the message I've just received:
"We have noticed some prohibited usage of your subscription.
We will continue to monitor your account, your calling behavior and your overall activity using Skype. If the prohibited usage still continues, your subscription will be disconnected. You will no longer be able to use or purchase any of Skype’s paid-for products.
The suspension of your access to Skype paid-for products will be permanent and you will be unable to transfer any existing products to a new Skype account, or receive a refund. However, you will be able to continue to make Skype-to-Skype calls and send instant messages.
We remind you that Skype’s products are for personal, individual and non-commercial use only. Our Fair Usage Policy can be found within our term of uses. Our subscriptions cannot be shared or used for commercial gain, such as telemarketing or call centre operations"
Do I have to register for a business account or what? Or what should I do now? This number have been using as my business contact and I can't change it. Please help.

Hello and welcome to the Skype Community.
What type of business are you engaged in?
https://support.skype.com/en/faq/FA34551/what-s-the-difference-between-skype-and-skype-for-business
http://www.skype.com/en/legal/tou/
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Using xml iView to get data from URL generating rss feeds

hi,
I have a URL
http://xml.weather.yahoo.com/forecastrss?p=USCA1116
from the yahoo weather site.
It opens XML data.
I then created an XML iView in the following way:
In step 3 in XML source; i typed the above URL. Clicked on Next.
In Step 4 for Selected XML translation format I chose MY_RSS_TO_XHTMLB.
When I preview it gives the message : Error while using XML iView, please contact your system administrator.
I have Portal SP14.
So as mentioned before in a forum, I went to System Administration -> System Configuration -> Service Configuration -> Applications -> com.sap.portal.ivs.httpservice-> proxy
and changed "HTTP Proxy Host" to "proxy" and "HTTP Proxy Port" to 8080.
Then to re start I right clicked com.sap.portal.ivs.httpservice, went to Administrate and restarted the services.
But I still get the same message
Error while using XML iView, please contact your system administrator.
Can you please let me know if these 2 settings are correct.
thx.

Hi,
Could you please let me know if you were able to solve this issue. Inspite of all the suggested configuration we are still getting the same error, as stated by you.
Anyone able to overcome this issue, please reply. Also let me know if we need to consider any specific versions of portal & browser, JRE etc..
Thanks,
KSK

Using XML File as a Data Server

OK - here's my scenario:
- Have an XML file that I am holding parameters (i.e log file folder) in
- I have set the XML file as a data server (which test connects OK) and created physical and logical schemas in Topology Manager
- In Designer, have created a data model for this file
What I am trying to do is populate/refresh a global variable with a value from the XML file; however, when I make a change to the value in the XML file, the value does not get passed into the variable.
In the global variable, it is set to refresh from the xml data source and in a package I am using a variable step set to refresh but still the data does not update with the current values in the file.
Couple of other things - if I go to the data model and view the data, it sees the value that is in the xml file but the variable is not getting the same value - it seems to be using some kind of cached value. Also, if I close any open ODI apps (Designer, Operator, etc.) and re-open, the values (sometimes) seem to reflect what is in the file.
Crux of the post - am I missing something so obvious that I cannot see it or has anyone else experienced this kind of issue.
Thanks,
Gee

OK - I got this working but in order to do this I followed some info from another post and changed the structure of the XML.
Previously, it was structured as:
<params>
<param>
<name>Test1</name>
<value>Some Value</value>
</param>
<param>
<name>Test2</name>
<value>Some Value2</value>
</param>
</params>
Now I have changed it to:
<params>
<param name="Test1" value="Some Value" />
<param name="Test2" value="Some Value2" />
</params>
I also added the dod=true value into the JDCB url.
Now, one of these circumstances fixed my issue (of which I am very glad) but I don't know which one :-) .... and I currently don't have the time to find out.
I may investigate this further in the future (and post accordingly).
Thanks,
G

Hi, i am using Microsoft outlook 2011, version 14.3.9 on my Mac. i use outlook for my business mails but facing problem of viruses. plz advise.

Hi,
I have OsX 10.9 installed and use Microsoft office for Mac 2011 for my business emails. before i not installed the antivirus as i thought MAC not get infected but my IT People always advice to install the Symantec anti virus. 2 months back out e-mail server get down as my system created too many junk E-mails (as per my IT staff).
now i have installed Symantac antivirus and no such E-mails. still everytime i scan my system i get visuses detected in outlook datafile.
shall appreciate your advice on the same to avoid viruses.
Regards,
Ali.

Any and all viruses in your Outlook email database would be from incoming attachments. Virtually 100% of them from Windows users who forward them, or get an email virus on their end which sends out the same email to everyone in their contact list. A few randomly come in with spam, such as a fake FedEx or UPS email saying the attachment is some sort of missed delivery notice, but is actually a Windows .exe file.
Any such email viruses do not work on the Mac OS. They can't. They require .dll files in the Windows OS, and Windows as the active OS itself to work. On your Mac, they're just a small amount of wasted disk space that can't do anything. The only way you could send them out is by forwarding an email you received with the attachment still in place.
As such though, a lot of businesses require Mac users to have AV software to catch such attachments so you know they exist and don't forward them. Otherwise, OS X still has very little need of AV software.
It's also not uncommon for AV software to report false positives. The viruses Symantec is detecting could be just that. Or, they still actually are on your Mac, but you can't see them. In a very odd decision, neither Entourage, or the new replacement Outlook for Mac actually delete anything from the email database, even after you remove it from the Deleted folder.
To really clear out the database, close Outlook. Hold down the Option key and launch it again. Instead of Outlook's normal interface, you'll get this:
Most users have only the one account, so this is likely what you'll see. Click the Rebuild button. It should only take a few seconds to run. More if your email database is large. When it's done, it will show two entries. One that again simply says "Main Identity", and another with a date after it. The one with the date is the original before rebuilding.
Close the MS Database Utility and launch Outlook normally. If everything looks as it should (check out your contacts list and live email you expect to be there), then the rebuild worked as expected without creating errors in the newly rebuilt database. Close Outlook.
Now go into your user account at:
/Users/your_account/Documents/Microsoft User Data/Office 2011 Identities/
You will find the same two folders there you saw in the utility. Main Identity, and Main Identity [date]. If you want, highlight both folders and do a Get Info (Command+I) on them and look at the size difference. If you've deleted hundreds, or thousands of emails from the Deleted folder within Outlook, especially if they were lots of attachments in them, the size difference could be huge. That difference is all of the inaccessible deleted emails that were still part of the database.
Put the Main Identity [date] folder in the trash and delete it. Now run your AV software. Any viruses that were still part of that old database are now truly gone and won't show up in a report.

Use Skype for a business. What is the best way to ...

We have a new business that is starting and a lot of the work will be done by people in different parts of the United States. We would like to have incoming calls be to 1 number, and have them be able to select whom or which department they need. If a calling tree is not available not a big problem.
We also would like to have control of the skype account so it can be assigned, and if then reassigned based on personnel change. We are unsure of how you control this or if it can be controlled. We are assuming that would could simply change a password and then someone new could use it. We know that on a personal account the user would be able to take control as they can see the account info and change the primary email and reset the password. Unable to find anything out about a business account.
We would like to set up each account on a subcription, that has a number and unlimited calling in the US and voicemail.
Would love to be able to talk to any business person that has used skype on a business level so we know what it can do well, and what it can't do at all.
Thank You,
Kevin

If you have an SSD you can run the cache and programs on the same drive. However, many recommend a scratch disk size of 100-200 gigs so that will not work here unless you opt for a larger SSD. Otherwise an internal spinner is recommended that does not contain the program files, or idealy any other files that may want to get acessed at same time (only one read/write head per drive).
With 32 gig of RAM you may not need the constant use of the scratch drive unless working on large images with lots of layers. So see no advantage to moving folder to SSD for temp work environment.
From what I read the new crop of SSD do not have the wear problems of the older versions.

I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

Embie wrote:
I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware. Great. I will replace my faulty hardware manufacturer. Simple, HP never again.
In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you. Please read this post then provide some details in a new thread. What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth? What is the problem you are having (with the printer...)?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

What does "Personal Use Only" for small business owners mean?

For small businesses or Sole-Proprietors, computers they use for business are also the machines being used for personal use. If I understand the new Mac App Store license correctly, you cannot ethically purchase an app on the App Store that will be used for business use. If that is the case, the greatest oxymoron is that they have a "Business" section in the App Store.
I truly LOVE how easy the App Store makes managing one's apps, but if I have to now deal with seperating all purchases based on it's overall use, they have just complicated the small business scene for small business owners.
I fully understand them wanting to discourage a large business from purchasing, for example, Aperture, once and installing it on 100+ machines. But if that is what they're trying to avoid, why not be more specific in the terms of the updated App Store license info. Instead, they are shooting down any and all use of anything purchased in the App Store for business.
Any other small business owners facing the same situation?

Here is a clause from the Terms and Conditions, which can be found at http://www.apple.com/legal/itunes/us/terms.html#APPS
*Begin quote*
(ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use either (a) by a single individual on each of the Mac Product(s) that you own or control, or (b) by multiple individuals on a single shared Mac Product that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Product and laptop Mac Product, or multiple students may serially use the Product on a single Mac Product located at a resource center or library.
*End quote*
It seems that as long as you abide by these guidelines, you can use App Store apps for business.

Can't use Mail for Exchange With E71

I downloaded MFE for My nokia E71, and as i am using Microsoft Exchangelabs.com as my exchange server. unfortunately MFE is not working, i mailed a couple of MS technical support and the final remark was
(the implementation of the Exchange ActiveSync is not compatible with Exchange Labs. For example, E71 may not support wild card certificate (*.exchangelabs.com) Exchange Labs uses for ActiveSync.)
I installed Roadsync to check on the exchangelabs.com service, It works smothly. However I would prefer to Use MFE. Could any one help me on this issue.

After playing around for a while, I'm now able to get my exchange mails working.
The issue was:
I installed MfE by using my phone browser which was working synced but didn't give me the icon to check my mails.
Solution to this particular issue is:
Un installed the MfE which i previously downloaded.
I downloaded MfE from Nokia web site and used Nokia PC Suite to install in on my phone.
Re created the profile
Synced it.
and I was able to see the Mail for exchange icon to check my mails.

USING XML FOR EXCHANGING BUSINESS DATA AMONG APPLICATIONS

Similar Messages

Maybe you are looking for