Using Yasu get user auth error after 10.4.4 update

I just updated to 10.4.4 and now when I try to run Yasu to gun maintenance scripts and stuff I get a user authentican failed error. Anyone else getting this? Any idea what I can try to fix it? I ran the daily, weekly, and monthly scripts from the command line (it didn't tell me it completed or errored out) and ran a permissions repair and also rebuilt the directory using diskwarrior but still can't get yasu to work. Any ideas?

NM got it

Similar Messages

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix

I am trying to link my PC to my Mac and Iphone and I pad. I can't use my Itunes account on my PC - when I try and enter Icloud on my computer i get a server error after I put in my e-mail and password.

Question - Trying to use Icloud on a PC - I get a server error after I put in my e-mail and password. Why? I can sync up all my devices from Itunes with my MaC, Iphone and IPad but I can't do it with my PC

I regret that you're having trouble setting up your email, corbad! You're on the right track with your incoming email address. You might also try incoming.verizon.net or incoming.yahoo.verizon.net as possible alternatives, and 995 as the port number. Please let me know how that goes!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

HT2101 i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not n

i got an iphone 5c last saturday. i noticed that after merely 5minutes of using facebook, my phone got warmer than the usual. i know that phones will get warm if being used but getting a warm phone after just 5minutes of surfing with 3G seems not normal. compared it with iphone 5 and 5s and they are not getting warm like that. is it a software or hadware issue?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

Getting a reistry error after installing telling me to reinstall itunes

I am getting a registry error after installing iTunes and tells me that the drivers and data associated with importing CDS or Burning CDs cannot be recoginized and to reinstall Itunes... I have done this about five times now and have removed my computer of all traces of iTunes and am still getting this error. if someone could help it would be greatly apperciated.
Thanks,

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HT1338 I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

I keep getting a Networking Error: when i run Software update. i have 10.5.8 and want to upgrade to at least 10.6 or later. i know the network is working perfectly.

Snow Leopard OS 10.6 is not available via Software Update, it is paid upgrade.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
OS 10.6 Snow Leopard is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

When updating iTunes to 11.4 I get the following error: "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

When updating iTunes to 11.4 I get the following error: "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

On My Mac Pro Getting an unknown error message when trying to update apps

On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
Settings>Store>Apple ID - tap your ID and sign out.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sign in again -Settings>Store>Apple ID - sign in.
If that doesn't work either, reset your iPad and see if that helps.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Portal 7.1 with AM in realm mode, getting HTTP 500 error after portal login

Hi!
I have installed AM in Realm mode and on another webserver Portal. Worked fine so far with the standard users (Enterprise sample and such)
Now I have created an organisation with ldap authentication module which points to corporate ldap and set the flag "Return User DN to Authenticate:" to false.
Now I get after Login on the edit User Page the following Universal ID:
Universal ID: id=rc017706,ou=user,o=internal,o=xxx,ou=services,o=portal
When I login to portal, I get a 500 error, and logfiles tells me:
[#|2007-09-02T19:47:15.996+0200|SEVERE|SJS Portal Server|debug.com.sun.portal.desktop|ThreadID=14; ClassName=com.sun.portal.desktop.DesktopServlet; MethodName=doGetPost; |PSDT_CSPD0017: DesktopServlet.doGetPost()
com.iplanet.am.sdk.AMException: Unable to get attributes from data store.
at com.iplanet.am.sdk.ldap.DirectoryServicesImpl.getAttributes(DirectoryServicesImpl.java:791)
amSDK:WARNING: Exception in DataLayer.getAttributes for DN: id=rc017706,ou=user,o=internal,o=xxx,ou=services,o=portal
How to I setup an external ldap for authentication in realm mode for use with portal 7.1? Can somebody tell me where my error lies?
Thanks for any hints, Christoph

Yes, copy config is enabled in all organisations.
I also tried to create an ldap data store instead of amsdk, but same behavior.
I have "fixed" the issue through a hack now by creating my own ldap login module, simply copied the original one and replaced LDAPPrincipal with my own version. It returns now a correct dn for the user in portal instead of the username only.
Works this way. Alas, it is just a hack...
As far as I can see, the problem is in the IDRepository. Its somewhat:
If (username is a DN) return username;
else return UniversalID;
This universal ID is then used by ps to get desktop information and since it is not a valid dn in ldap the desktop servlet cannot proceed...
I guess the problem does not appear in your environment. Maybe it was introduced with update 1? Do you use update 2?
Thanks, Chris

Crystal Report Using ECC Data has Auth error in Infoview

We've created a Crystal report that successfully accesses ECC data from a function module in our Dev environment when the report is executed from within Crystal Designer. When we try to execute the same report against the same development ECC system from within InfoView we get the following error:
ERROR: The Database Logon Information for this report is either incomplete or incorrect.
The connection information is the same as it is in designer. We are able to successfully run Crystal Reports over BW data within InfoView. Any ideas about what might be wrong?
Doug

Ingo,
The consumers of the report do have ECC access for order and inventory management so licensing should not be an issue.
We were able to resolve the issue. The problem was with our version of SAP GUI on the BO Dev server.
We had to update our u201CServices.dllu201D and our u201CSAPLogonTree.xmlu201D file with an accurate version. Once that was done, the report executed as expected in InfoView using LDAP.
Thanks,
Doug
Edited by: Douglas Eberle on Jun 13, 2011 6:54 PM

HT1689 I get an unknown error after typing my password..unable to purchase songs or apps.

I get "unknown error" after I input my password to buy songs or apps. Had no trouble last week.

I am having the same issues. My apple ID works from everywhere else (icloud, appstore, iphone, ipad), just does not work in iTunes.

I'm getting a 1048 error after upgrading MATLAB.

Hi-
I'm hoping someone might be able to help me. I have a VI that I've been using w/ no problems that has several MATLAB script nodes. Recently, MATLAB was upgraded on this machine from 2006b to 2008a. When I try to run the VI now, I get a 1048 error when the MATLAB script tries to execute. (I'm not clearing any variables or giving them the same names as existing MATLAB functions.) I'm currently running LabVIEW 8.6. Any ideas? I've tried just shutting down LabVIEW & restarting w/ no luck. Thanks in advance!
Erin

Hi Erin,
Usually ActiveX registration issues will cause an error 1047. But you could try reregistering the ActiveX components.
Take a look at the following KB: Why Do I Get Error 1047 When Trying to Use The MATLAB script node in LabVIEW?
Let me know if this helps at all.
Justin Parker
National Instruments
Product Support Engineer

Recently built a new pc, getting a 0xc0000001 error after installing windows 8

I recently upgraded pretty much my entire PC after having my old processor go out. Built a new PC off of a MSI Z77A-GD65 motherboard, which is why I registered on this forum. Pretty much all the parts are new besides my GPU which was somewhat recently upgraded anyways. Anyways I built this PC and everything in functioning perfectly hardware wise but for some reason Windows 8 just doesn't want to boot up after I ran the installer on a fresh hard drive. I keep getting this 0xc0000001 error and I tried all sorts of repair options which I fear may have screwed something up since I am now getting two windows 8 installations showing up.
Anyways I just want to get windows working so any help would be appreciated.

Here is one solution that you might try: http://techmell.net/how-to/fix-error-code-0xc0000001-windows-8/

I keep getting a 3014 or -1 error after I tried to update my phone and it went into recovery mode. What do I do?

I was updating from 6 to 6.1.2 and my phone went into recovery mode. I usually get a 3014 error but sometimes it gets past the USB screen and goes about halfway through the apple screen and gets a -1 error. I don't have firewalls, no antivirus, the only thing I have is a mandatory college internet connection program that I don't think I can get rid of. What should I do
Also, I already tried to "Hold both home and power button, let go of the home button at the apple screen" but it didn't work.

That is usually a result of an iPhone that at one time has been hacked, jailbroken, or rolled back. Try it on a different computer.

Cyrusdb error after 10.5.6 update

After update to 10.5.6 I suddenly have a user with a corrupt cyrus db account. I'm getting this: DBERROR: error fetching user.grandewoods: cyrusdb error
In Server Admin > Maintenance > Accounts: there are no accounts listed and under the Database tab it says that the Database location is not available. Most users are functioning normally though.
I have tried running several commands to fix the problem with no success:
# sudo -u cyrusimap /usr/bin/cyrus/bin/ctl_cyrusdb -c
# sudo -u cyrusimap /usr/bin/cyrus/bin/ctl_cyrusdb -r
# /usr/bin/cyrus/bin/reconstruct -i
Any ideas are appreciated.
jbk

does your dock even launch? see if you still have the application in system-library-coreservices-dock. the file should be around 7.4 megabytes. If there is nothing there, then i dont know what you could do. If it is there, try to open terminal and type in "killall Dock" (without the quotes, however follow capitalization) Most likely you will get the error again, however if not then you've made progress..
Kevin

Using Yasu get user auth error after 10.4.4 update

Similar Messages

Maybe you are looking for