Using your Palm as a wireless Modem. :) (Rogers AT&T)

I have read a couple of times that it was possible to use the my treo us a wireless modem for my laptop..
Since Rogers recently started selling the Iphone, their $30 dataplan is now 6 gigs!! (up from the just 200 mb)..
I REALLY REALLY wanted to see if I could do this.. (surf the internet on my laptop wirelessly).
first I purchased a USB Bluetooth adapter. the Dlink DBT-122..
It took me hours to finally find out the secret on how to use the "dial up networking"..
"pairing" the laptop and my treo 680 worked fine.. the rest I had to guess and find on the internet.
1.) The phone number to dial was   *999***1#
2.) the username was :"wapuser1".. (which I took from my palm in the PREFERENCES::NETWORK)
a password wasnt needed,
Post relates to: Treo 680 (Rogers)

http://blog.treonauts.com/2007/02/palm_treo_softw.​html
"USB Dial Up Networking (DUN) software for Palm OS smartphones is not compatible with Windows Vista at this time.  This includes carrier-branded DUN software for Sprint and Verizon, as well as the software for Bell, Telus and other carriers."
From Treonauts
Post relates to: Centro (Sprint)

Similar Messages

  • Using iPhone3Gs as a broadband wireless modem

    I read somewhere that it was possible to use the iPhone 3Gs as a broadband wireless modem for a notebook/laptop PC. Is this true, and can anyone verify that it works?
    I am thinking about getting a 3Gs for myself and giving my 3G to my wife. But in order for that to be cost effective we have to get rid of her verizon phone and my broadband wireless card, both of which are with Verizon.

    Tethering is not supported yet.
    From AT&T's website:
    " in the future, AT&T will offer tethering capability for iPhone 3GS and iPhone 3G."

  • How to use time capsule with Verizon wireless modem

    What is best setup for TC and Verizon's Ultraline wireless modem.  Thanks!

    Bridge the TC..
    I am assuming this is cable internet.. not wireless.
    Just leave the Verizon doing what it is doing.. with the TC bridged you just plug it into the modem with ethernet.
    To bridge the TC go to dhcp and NAT page for v6 utility.. or Internet tab for v5 utility and pick the connection sharing off bridge mode.

  • Can I use an Airport as a wireless modem, and will it improve a slow internet connection (from the source)

    Living on a acerage outside of the city, we have a weak internet signal. It takes days to download a movie from iTunes. Will using the new Airport actually improve our internet, or are we limited to the poor incoming internet connection?
    I'm not very skilled in network stuff, so apologies if this question is really stupid.
    Thanks

    There is no modem in the Airport router. You cannot use it alone. You must have a modem and the speed will be set by the type of broadband, and factors like distance.
    Ring your ISP and ask if there is any way to get a faster connection.
    Often 3G/4G wireless will be faster than adsl but will cost many times more.

  • HT2497 i have a new macbook air occasionally I have trouble with slow internet and trouble with connecting to the internet.  I use Verizon Fios and a wireless modem

    I have a New macbook air, purchased last week.  There are time when internet runs slow or not at all.  It is not the Verizon Fios as my IPAD's work fiine during these times.

    Turn off the router. Turn back on. Wait until all the lights are lit properly.
    Restart the computer.
    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Best.

  • Connecting WRT54g to Wireless Modem

    I am having a hard time. I have always had me WRT54G hardwired with the internet, but now my new service provider told me that I had to hook up their modem to the phone line an use their wireless modem (Motorola 3347). Now when I initially set it up and hardwired the modem and the router together my internet worked. Now I seperated them and I cannot get the WRT54G to see the modem. It isn't acting like a wireless modem.
    What am I doing wrong?

    To get your WRT54G router to work with the wireless modem is to get a Third party firmware , Like the DD-WRT firmware which has a feature that you can use to connect to the wireless modem , I have the same modem & I have used the dd-wrt firmware on two wrt54g routers , ver 3 & ver 8 , they have been working with the modem & I have had no problems yet. the feature of the dd-wrt firmware is a Repeater Bridge & It does work.

  • Using an iBook as a wireless router

    I recently found that i could use another computer like a base station. so i want to ask ppl some questions before i do this to make sure that no one will be able to try to use my slow AOL access as i have been using other people's wireless internet (firewalls=no problem). I want to make this a closed network but i do not know how to do this. Also please tell me how to do this, I know you go to shared and the internet section and create a computer to computer network... other than that how do i do this?

    To use your iBook as a wireless router you can use the internet sharing feature. You can setup a WEP password if you click the Airport Options button.
    Goto SystemPrefences->Sharing->Internet Tab.
    From the drop down menu select 'Share your connection from Built in ethernet'
    In the section 'To computers using' check Airport.
    Then choose the 'Airport Options' setup a wep password.
    Finally click the 'start' button.
    However WEP encryption can be cracked so it is not really secure.I see the internet sharing feature built into the Mac OS as an on the fly temporary thing you can use for example if a friend comes round who needs to get online.
    The best solution is to invest in a wireless router.

  • Using Imac intel based as wireless router?

    Can you use your imac as a wireless router? If anyone knows,email me.

    One more thing..... Does using your Imac as a wireless router reduce your processing speed signicantly with only one laptop sharing your internet connection? Would buying a separate wireless router be preferred?
    Hi
    You can, if the following are true:
    - The iMac receives its internet through the ethernet
    port
    - It has a built-in Airport card
    If so, you can use Internet Sharing. Launch System
    Preferences, go to Sharing, then Internet. Select:
    - Share your connection from: Built-in Ethernet
    - To computers using: Airport
    Click Airport Options to set a name and encryption
    settings for your new network. Then click Start.
    Other wireless-enabled computers should now be able
    to see and connect to your new wireless network.
    Matt
    One more thing..... Does using you Imac as a wireless router reduce your processing speed signicantly with only one laptop sharing your internet connection?

  • HT3546 can you use your wireless modem and a airport to extend wifi or do you need two airports?

    please help

    If you require a wireless connection, then you would need a second AirPort to accomplish this. The first AirPort would connect to the existing wireless modem via Ethernet. It would be configured as a bridge and also configured to be extended by the second AirPort. You can use any combination of 802.11n AirPort models for either of the AirPort to configure an extended network. Finally, you will want to disable the wireless radio in your wireless modem to prevent Wi-Fi interference between the two wireless networks.

  • How to set up email, add apps, use web through wireless modem?

    Hi,
    Have a new 8310. OS is v4.5.0.37 Platform 2.7.0.55I'm in Australia, currently with Telstra but in the process of changing.
    I have not purchased a data plan for the phone. I have a wireless modem for my desktop & wondering if I can use this to connect my phone to the web without purchasing data?
    Do I need a data plan to send emails? Can I use my existing online email acct(yahoo), or do I need to set up a special one for the phone? If so, please explain where/how? If not, what other info do I need to configure the existing one? It seems I need a PIN as well as e-addy & password(& assuming it's the yahoo password?)
    TIA
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    Some useful reading:
    http://na.blackberry.com/eng/support/blackberry101/
    http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
    loosie wrote:
     I have a wireless modem for my desktop & wondering if I can use this to connect my phone to the
    No
    loosie wrote:
    I have not purchased a data plan for the phone.
    Do I need a data plan to send emails?
    Yes. Basically, to do anything other than use the phone, you need a data plan. Period.
    loosie wrote:
     Can I use my existing online email acct(yahoo),
    Yes...see the above reading material.
    loosie wrote:
      or do I need to set up a special one for the phone?
    No...not required.
    loosie wrote:
     It seems I need a PIN as well as e-addy & password(& assuming it's the yahoo password?)
    PIN...hmmm...there are many definitions for that acronym in the BB world. The most usual one is a unique identifier, much like an IP address or phone number, that is assigned at the factory to your BB. It is used to register your BB for various services (yes, via a data plan) so as to identify your BB on the network.
    I hope that helps.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Can I use an airport extreme to extend the range of my wireless modem

    Can I use an Airport Extreme to extend the range of my wireless modem?
    At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
    Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
    Regards
    Michael

    Thanks Tesserax,
    Your answer has confirmed my suspicions.
    Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices. 
    I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
    However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
    The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

  • I recently bought an external hard drive and attached it to a wireless modem router. The problem is that i can't access it from my macbook. I get a "connection failed" and "the server is available on your computer. Access the volumes and files locally".

    Well I believe I described the problem above. I want only to add that the external hard drive is a Seagate FreeAgent GoFlex Drive 1TB and the wireless modem router is a Belkin N Plus (model F5D8635-4 v1). Also, in the finder window under "shared" I see a "belkinserver" and when I click it, it says "connection failed". If I click "connect as" I get the "the server "belkinserver" is available on your computer..." which I mentioned above. I tried to connect macbook via ethernet to the modem router and then when I typed "smb://belkinserver" it immediately prompted me for a username and a password and when I typed them finally I got to enter the contents of the hard drive! So what's the problem wirelessly? 

    If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
    Cheapest option:
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
    If you don't have enough ports to use this, try the next cheapest option:
    Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
    Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

  • Using 8530 as wireless modem

    Hi there,
    I'm trying to use my wife's 8530 as a wireless modem for my laptop.
    Data plan turned on through Koodo - fine.
    Run BB desktop, connect the phone, select wireless internet - get a message that "the radio is not turned on"...
    What??
    Help please...
    Thanks,

    Hey Chefmikey,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    This article will assist you on how to tether your BlackBerry® as a modem to your PC: www.blackberry.com/btsc/KB24629
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Using 6300 as Wireless Modem

    Heya guys, I own a Nokia 6300 with a working GPRS contract with TPG.
    I want to somehow use my Nokia 6300 as a wireless modem so that my iPod Touch can use its internet so I can surf the web on a larger and better screen. Using bluetooth perhaps?
    Is there any way I can do this?
    Regards,
    Josh

    You can use the supplied USB cable to use your phone as a modem to connect your desktop or laptop to internet. There is an app for symbian devices called 'joikuspot' through which you can do wireless tethering. I haven't come across an application like, or itself, for non-symbian devices. So if you want wireless tethering better buy any latest symbian smartphone.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Set up wireless modem without using a network card

    How can I set up my wireless router (WRT54G v8) if I do not have a working network card on my laptop? The wireless card works fine, but the wired ethernet card is shot. I have been connecting to the Internet via the USB port.
    The set up instructions assume you can connect to the Internet using your computer's ethernet card.
    I have a Comcast cable Internet modem.

    You can setup the router through a wireless connection although it is not ideal.
    With default settings the default SSID is "linksys" with no encryption. You connect to this network and open http://192.168.1.1/ Then you configure the router for your internet connection, change the SSID, enable wireless security, change the router configuration password, etc.
    It is a little bit more complicated as you have to make sure you configure your router and not your neighbor's who may also use a Linksys router in default configuration and you have a couple of disconnects after changing the SSID and after enabling the wireless security.

Maybe you are looking for

  • SetProperties method invoked only in debug mode

    Hey, This is a strange problem so i'll try to be clear. I wrote a custom tag. running under degub mode, runs the tag well, and all is well. but when i run un normal mode (not degub) it does not work. i found that the setProperties method is not been

  • Adding a Bookmark Link

    Hello, I've been looking all over for how to create a bookmarking link for IE7 using Flash CS4 Action Script 3. I'm creating the button using the following code: BookMark_mc.addEventListener(MouseEvent.CLICK,gotoBookMark_mc); function gotoBookMark_mc

  • How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

    Hi guys, I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The HP says that I can update or install this printer using the Apple Software Update anyway I don't see any update or installation on

  • Re: oracle installer

    This is probably the wrong place to ask this question, but ever since you changed the web site I have been unable to find the general form lists. Where have they gone? Also, my main question is, why is the solaris 2.6 oracle 8.1.5 installer so painfu

  • 'Park' option is greyed out

    Hi, I am passing advance to vendors in F-48. After filling all the details, i went on document tab. There i can see 'park' option. But i am unable to click on it. Other things like Simulate & Post under document tab, i am able to select. Let me know