UsingSCSI for storing SAP Database MAXDB on NAS

Dear All,
We are working with ECC 6.0 on Linux RHEL5 &Database MAXDB 7.6.  For the SAP ECC 6.0 QA system we are planning to use  NAS box using ISCSI for installation of Database  storage,Is there any disadvantage in this? as we are planning to use  file system for sapdata files in NAS.  Any help in this highly appreciated.
Thanks a lot
Hany

Hi,
as you're a SAP employee, you should have really opened an internal message for this issue on the queue BC-DB-SDB(-INS).
Is this the very first MaxDB (or SAP DB) installation on this box? I think not, I think there might be some leftovers of an old installation that hasn't really been removed completely.
Note 599129 describes the steps needed to remove a SAP DB/MAXDB installation.
Currently, I think that you've still got some installation registry problem, very probably caused by the file /etc/opt/sdb still pointing to other Independent paths. I suggest you rename this file, to for example to /etc/opt/sdb.old and retry your installation.
Additionally, most of the new paths you've apparently chosen are far from the standard ones, probably the reason for your current issue:
Independent Program Path: /sapdb/NA8
Independent Data Path:    /sapdata/NA8
Database Kernel path
[opt/sdb/7600] should be : /sapdb/NA8/7600
Using the above will create a <b>very confusing</b> and mixed up installation. I strongly recommend against it. I would rather go for the standard/default options.
Regards,
Roland
Message was edited by: Roland Mallmann

Similar Messages

  • Best Practice for the database owner of an SAP database.

    We recently had a user account removed from our SAP system when this person left the agency.  The account was associated with the SAP database (he created the database a couple of years ago). 
    I'd like to change the owner of the database to <domain>\<sid>adm  (ex: XYZ\dv1adm)  as this is the system admin account used on the host server and is a login for the sql server.  I don't want to associate the database with another admin user as that will change over time.
    What is the best practice for database owner for and SAP database?
    Thanks
    Laurie McGinley

    Hi Laura
    I'm not sure if this is best practise or not, but I've always had the SA user as the owner of the database. It just makes it easier for restores to other systems etc.
    Ken

  • Advantage of using RAW devices for storing database

    Hi,
    Marry Christmas to all.
    Oracle 10g version 10.2.0.1.0 (rac)
    OS : HP-UX 11i
    I am new to this enviornment. We are using raw devices for storig the database.
    Please tell what are the advantages for using raw devices for storing the database?
    Thanks.

    http://www.fors.com/orasupp/unix/37914_1.HTM
    The above link explains the raw devices and advantages.

  • DI Events Service over several SAP Databases

    I have a problem with DI Events Services. I am developing an application that makes use of  DI Events Service, in the documentation of the application says that you can make use of it to notification events in multiple databases, simply instantiating
    B1DIEventsService object for each SAP database. At the time of the second instance and run the Connect method
    I get "already signed the TCP channel", I wonder if the applications have this functionality and that way you can implement this
    change.
    Edited by: Andres Naranjo on Dec 11, 2009 5:18 PM
    Edited by: Andres Naranjo on Dec 11, 2009 5:18 PM
    Edited by: Andres Naranjo on Dec 11, 2009 5:19 PM

    Hi Andres,
    Very good solution for the multiple database connections!!
    Thanks for sharing your findings.
    I'll implement this changes for the next release of DIEventService.
    Best Regards
    Trinidad.

  • R3load EXPORT tips for 1,5 TB MAXDB Database are welcome!

    Hello to ALL;
    this post is addressed to ALL MAXDB-GURU's !!
    I'v few questions to MAXDB Performance-Guy's for R3load Export on MAXDB!
    (remark to my person:
    I'm certified OS/DB migration consultant and have already done over 500 OS/DB migrations since 1995 successfully)
    BUT now I'm face with following setup for Export:
    HP- IA64 BL870c,  4 CPUu2019s Dual-Core + Hyperthreading activ (mean's 16 "CPU'S" shown via top or glance)
    64 GB RAM, HPUX V11.31;
    MAXDB  7.7.07
    ECC 5.0; Basis/Aba 640.22
    SAP-Kernel 640-Unicode Patch 381
    8 sapdatas are configured on unique 200GB LUN's and VG's in HP-UX; on storage-side the 8 220GB LUN's are located on (only) 9 300GB-Disks with Raid-5 Level and within HP-UX each VG/LVOL is mirrored via LVM to a second desasterdatacenter (200m distance)
    LOGFILES:
    2 x 4 GB LUN Raid-1 on Storage and via LVM  also mirrored to failover-center
    MAXDB-Datasize: 1600 GB Overall and within this 1350 GB used, TEMPUsage about 25 GB !
    MAXDB-Parameter-Settings
    MAXCPUu2019s 10  (4 x IA64 QuadCore+Hyperthreading shows 16 Cores within top and galcne
    Cache_SIZE= I/O Buffer Cache = 16 GB (2.000.000 Pages)
    Data-Cache-HitRatio:  99.61%
    Undo-Cache = 99,98%
    the following sapnote for MAXDB Peformance and Migrations are well known and already processes
    928037, 1077887, 1385089, 1327874, 954268, 1464560, 869267,
    My major problem is the export-runtime with over 4 days on the first dry-run (6 R3load's running on Linux-APPL-Server), and 46h on second runtime, 6 R3loads running on DB-Server IA64)
    the third trail-run was aborted by me after 48hours and 50% export-dump-space was written. In all 3 dry-runs, no more than approx 3.5GB DUMP-Space were written per hour!
    My first question to all MAXDB-Guru'S: How can I influence/optimize the TEMP - Area in MAXDB?? I didn't find any hint's in SDN or SAPNOTES or MaxDB Wiki or google....As fare as I know, this TEMP area "resides" within MAXDB-datafiles, thus it's seperated on my 48 datafiles, spreaded over 8 LUN/VG/disks. But I see LESS throughput on disk's and MAXDB-Kernel uses only ONE of ten's cpu-cores (approx 80% - 120% of 1000%).
    The throughput or cpu-usage doesn't change when I use 2 or 4 or 10 or 16 R3load' processes in parallel. The "result" is always the same: approx. 3,5 GB Export-Dump and 1 CPU MAX-DB Kernelprocess is used !
    so the BIG Question for me: WHERE is the bottleneck ?? (RAID-5 Disk-LUNS mirrored with LVM ???)
    on HP-UX scsi_queue_depth_length I'v increased default value from 8 to 32 to 64 to 128 --> no impact
    2nd question:
    I'v read  OS-Note 1327874 - FAQ: SAP MaxDB Read Ahead/Prefetch, and we are running MAXDB 7.7.07.19! (MaxDB 7.8 is not suppored via PAM for IA64 640-UC-Kernel) and as far as I understood, this parameter will no HELP me on EXPORT with primary-key-sequence ! is this correct?  THUS: which parameter HELPS for speeding up Export-Runtime?
    MAXCPU is set to 10, but ONLY 1 of them is used??
    so this post is for ALL MAXDB GURU'S!
    who will be intrested to contriubte on this "high-sophisticated" migration-project with 1.5TB MAXDB-Database-size and ONLY 24h Downtime !!
    all tips and hints are welcome and I will give us coninued updates to this running project until WE did a successfull migration job.
    PS: Import is not yet started, but should be done within vSphere 5 and SLES 11 SP1 on MAXDB 7.8 ....and of yours in parallel to export with migration monitor, BUT again a challenge: 200km distance from source to traget system !!!
    NICE PROJECT;
    best regards Alfred

    Hi Alfred,
    nice project ... just some simple questions:
    Did you open a message at SAP? Maybe you could buy some upgrade support, this could be usefull to get direct access to the SAP support...
    Which byte order do you use? I know Itanium could use both. But it should be different, otherwise you would use a backup for the migration.
    And the worst question, I do not even want to ask: What about your MAXCPUS parameter? Is it set to more than 1? This could be the problem why only one CPU is used.
    Best regards
    Christian

  • Missing IDES ECC5 installation disk for SAP Kernel - MaxDB Version

    Hi,
    Our HQ sent us installation disks for IDES ECC5.  We copied them all onto our server and started installation.  The system is now informing us that it can't find the SAP kernel information.
    I can only assume that we're missing one of the installation disks.
    We're desperate to get this installed and it will take another week for our HQ to send through another disk.  Does anyone know whether we can download this from somewhere?  We have had a look on SAP marketplace but you only seem to be able to download the kernel for Oracle, MSSQL and DB2....no MaxDB.
    Additionally, if there is somewhere in Asia we can download this, then that would be better as we are having internet problems when connecting to Europe and the US.
    Thanks in advance!
    Tristan

    Hello Tristan,
    This is not the correct forum to post your question.
    You was not asked about the database(MAXDB) kernel software.
    You need SAP kernel software
    -> Review the installation guides at service.sap.com/instguides ->
    mySAP Business Suite Applications -> mySAP ERP -> mySAP ERP 2004
    -> SAP ECC 5.0 ->
      Installation Guides of SAP ECC 5.0 SR1
    -> < Please see the steps 'How to Proceed' > ->
    -> MySQL MaxDB
    < Part I: Planning and Preparation
      Part II: Installation and Post-Installation  >
    -> select the documents for the OS of your server.
    And the document from the 'Part I: Planning and Preparation' you will get information that you need the SAP kernel CD & & what is the minimum required version & the reference to the location at the SAP Marketplace to download it, if you don't have the required SAP kernel CD.
    < You could download the CD from service.sap.com/installations ->
    Entry by applicataion group ->
    Installations and Upgrades -> SAP NetWeaver -> SAP NETWEAVER->
    SAP NETWEAVER 04 ->
    Installation and Upgrade ->
    < OS> -> < database > -> CD 'SAP Kernel ... <database><OS>.
    SAP kernel software is database, platform, Unicode specific.   >
    In the 'Part II: Installation and Post-Installation' document you will find the the list of the required DVDs for the SAP system-ABAP installation.
    -> Are you running the installation of the the 'Central Instance', 'Dialog Instance' or 'Database instance' ?
    For the 'Database instance' Installation you need:
    SAP Installation Master DVD
    SAP Kernel DVD
    RDBMS DVD
    SAP Export DVD
    -> What CD/DVD do you have for the installation?
    <  You could download the CDs from service.sap.com/installations ->
    Entry by applicataion group ->
    Installations and Upgrades -> Entry by Application Group
    -> SAP Application Components -> SAP ERP-> SAP ERP 2004 -> Installation and Upgrade -> <OS> ->SAP DB  >
    You could also order the CD, if you have problems with download from the SAP Marketplace.
    Thank you and best regards, Natalia Khlopina
    PS: SAP Note 19466 will give you information about download of SAP Kernel Patches.
    Message was edited by:
            Natalia Khlopina

  • ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM.

    Dear Experts,
       I am in the process of ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM. Since the solman database is increasing randomly i need to archive the old tickets amd also the tables and also the other objects.
    Can any one help me how to archive and also what are all the objects to archive in the solution manager system.
    Regards,
    Umesh

    Dear ALL,
      I have got he table ARCDEL_OBJ ( Control Table for Archiving / Deletion) table I guess in this table  the archiving objects will be stored.
    The objects i got in this table are
    CA_BUPA
    CMS_PRJASM
    CRM_ACT_ON
    CRM_COMP
    CRM_IPMCON
    CRM_IPMPUC
    CRM_IPMSAC
    CRM_LEAD
    CRM_LEAS
    CRM_MKTPL
    CRM_MKTSC
    CRM_OPPT
    CRM_RAGR
    CRM_SACONT
    CRM_SALDOC
    CRM_SDBPBL
    CRM_SDBSOL
    CRM_SERORD
    CRM_SRCONT
    CRM_SRVCON
    CRM_SUR
    CRM_UBBPOL
    CRM_WTYCLM
    PRODUCT_MD
    CAN I ARCHIVE ALL THESE OBJECTS OR WHICH OBJECT HAS TO TO BE ARCHIVED IN THIS..............?????
    PLEASE LET ME KNOW THE  IMPACT OF ARCHIVING THESE OBJECTS.
    Regards,
    umesh

  • For best performance what's the size of an image to be stored in database?

    Hi all,
    can any one tell me..for best performance what's the size of an image to be stored in database?
    is it <256kb  or >256mb?
    when i google  we can store image as varbinary(max) and its limit upto 2GB..
    Can anyone exlain it?
    is it performance wise better..
    thanx in advance..
    lucky

    Your question does not seem apparently meaningful. If you need to store a 5MB image in the database, you store a 5MB image, not a 200 KB image or a 200 MB image. Business needs always trumph performance.
    Not surprisingly, the larger the image the more resources it takes to read and write it.
    What is a meaningful question is whether you should use the FILESTREAM feature or not. The cut-off limit here is usually given as 1MB. That is, if your images typically exceeds 1MB you should use FILESTREAM and access the data through Win32
    API. If your images are generally below this size, you should stick to regular T-SQL.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • How to reload archived data into SAP database for object FI_DOCUMNT

    Hi..could any one plz let me know how can i reload the archived data  which is on third party storage into sap database back. The archived data is related to FI_DOCUMNT. We don't have the Reload program for this object. The requirement is : Some of the FI documents are archived before being cleared. So, we want to reload the archived data back to SAP database and then do some modifications.
    Please tell me how this is possible..thanks a lot in advance.
    It's urgent.
    Thanks,
    Shamim

    Thanks Mylene. I've already gone through the same note..i was just looking out for the new standard program or any one have created any new program for the same. I think it's better we must wait for SAP to launch its reload program or else it's not possible to reload the archived data for this object.
    Thanks
    Shamim

  • How to setup Data guard for SAP database?

    Can someone please tell me how to setup data guard for SAP databases?
    Thanks,
    Abhi

    Hi Abhi,
    have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
    14
    Oracle Data Guard
    You can use "Physical Standby".
    You cannot use "Logical Standby".
    You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
    You can use Data Guard Broker.
    You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
    Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
    regards
    Kay

  • Which is better datatype for storing Images in 11gr2 Database ?

    Can anyone tell me which datatype should be maintained for storing images in database in terms of
    1. Space
    2. Speed.
    And, Is there another way for storing images instead of database ?
    Thanks/Regards in advacne.

    982164 wrote:
    Which one have better speed, database system or file system ?Database is better all around. It is not just a question of speed. It is a question of storage, security, flexibility, scalability, robustness and so on.
    If you use ASM and raw devices from a storage array or SAN, how do you get o/s files onto that? (requires a file system on the SAN/array LUNs)
    If it is inside the database, database security, concurrency and consistency apply to the image. Outside the database? How do you control who has access? Prevent someone with slippery fingers from accidentally deleting/renaming/moving images files? How do you backup up the image data with the image attribute data in the database?
    Having all this inside the database, part of the database, managed by the database, provides you with more flexibility, robustness, and security. After all a RDBMS is a data management system - it is designed for managing data. And that includes managing binary data.
    As for speed. Reading a 24MB image is reading 24MB worth of data. Whether that data is read by process A from disk1, or process B from disk2 - the amount of data is the same. So if you want faster I/O, then use faster disks. If disk1 is faster, process A will perform better reading the image than process B. If disk2 is faster, the roles are reversed.
    So I/O speed is not a direct function of process A or process B. It is a direct function of the I/O storage and fabric layer. Yes, a process's method of I/O can make a difference (e.g. using block reads not aligned with the physical blocks on disk). But this is more a configuration issue than process doing badly designed I/O calls.
    So the speed question is a bit loaded as it has more to do with the architecture and design of the I/O system - and less to do with the process doing that I/O. You can have a highly optimised I/O process doing poorly using an old and slow I/O layer, and poorly written I/O process doing pretty well on a SSD I/O layer.
    Databases like Oracle is designed for dealing with data - and thus effectively dealing with I/O. Lots of it. For lots of data. So I/O process design is not a consideration. The database processes will use the I/O layer as optimally as possible and as configured.

  • Best Oracle datafile size for a SAP ECC6 database.

    Hello,
    We plan to migrate our ECC6 SAP database on a new Windows X64 plateforme running with :
    - Windows 2008 R2
    - Oracle 10.2.0.5.
    The actual Oracle database size is more 2 Tbytes.
    Please could help me to find the best size for the Oracle datafile in this new plateform ?
    Today we create Oracle Tablespace for SAP with 8 GBytes datafiles but we have too many datafiles to managed.
    Do you have experimented 16 GBytes, 32 GBytes, 64 Gbytes datafiles for Oracle Tablespaces on this kind of SAP Plateform ?
    Thank you very much for your reply.
    Best regards.
    Jean-Pascal.

    Hello Jean-Pascal,
    well the answer as usual - it depends )
    We already discussed that topic some time ago - please check this thread:
    big file or small file
    Your storage sub system and stripping matters of course too.
    Regrds
    Stefan

  • SAP database cluster for oracle 10g

    Dear Experts,
    Can anybody give me some idea on how do SAP database clustering for oracle 10g on two different remote system.
    Is there any sapnote for this or any other help document. Is it possible to do on two different remote system.
    Please guide me.
    Thanks n regards
    Bhaskar

    Hi Bhaskar,
    do you have SDN account, that allow you to access customer available information in SDN?
    If yes,  please look at the
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8cd93-f1e9-2910-c186-86bfff3dac63">MSCS Configuration and Support Information for SAP NetWeaver '04 and 7.0</a>
    On page 20 you will find some helpful information.
    best regards

  • Database distribution for several SAP Systems

    Hi gurues, we have a very important concern about SAP on Z systems, it is possible/recommended to have on on Z system only one DB engine with several databases that correspond to several SAP Systems running on the machine?
    Because we have AIX platform right now  and we can not have that kind of database landscape, we only can choose between MCOD or one dataabase engine with one datase in one machine (we can not share db engine).
    Hope this question is clear enoguh for you.
    Regards
    Gustavo

    Gustavo,
    Sadly yes. You'll have to forgive some of my terminology. I actually work on the Basis team at my company and I am not a DBA. We happen to be running DB2 z/OS and we are using datasharing. For a sandbox ECC system we might have SID SE1 and DB2 sub-systems SE11 and SE12. For another sandbox BI system we might have SID SB1 and DB2 sub-systems SB11 and SB12. Even if datasharing is not used (and hence the 12 member would not exist, SE12 for instance), I would strongly recommend against MCOD and instead suggest using a different DB2 system for each SAP SID.
    We have spoken to at least 1 customer that implemented their ECC (ABAP only) and Portal (Java only) SIDs as MCOD in the same DB2 z/OS system. Unfortunately, DB2 z/OS has some somewhat arbitrary limits for things like thread storage which MUST exist under the "2gig bar" (apparently due to some 31bit code still in use). Effectively, this limits the number of threads (and in the SAP world the number of SAP work processes) that a single DB2 member can service. I believe the limit is around 800 threads. Of course, with datasharing you can spread the load to multiple instances (SB11, SB12, SB13, SB14, etc), but then you must also plan for extra resources to be available in a planned failover for maintenance type situation. This particular customer ended up needing to fine-tune some java database threads and ended up needing an extra DB2 instance or two to handle the load during maintenance using planned failover.
    Brian

  • Disp+work.EXE stopped when installing NW07 for CRM 2007 on Maxdb Windows

    Hi,
    I am installing NW07 for CRM 2007 on Maxdb 7.7 and Windows 2004 64bit.
    The installer cannot start the dispatcher on step 32. The dispatcher starts with green and is running  a while but Dialog queue is standstill. After few secodes the dispatcher changes to yellow as become disp+work.EXE stopped.
    Any advice? I have checked the RAM and log sizes etc and they seem to be ok. Database is running ok.
    System cannot connect the database?
    Here is dev_w0 file contets:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        XCR
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2260
    Sun Nov 16 16:56:01 2008
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2260) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3901
    Sun Nov 16 16:56:06 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >ESITV016LAB_XCR_01                      <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE70050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000EE70050
    DpShMCreate: allocated wp_adm at 000000000EE72150
    DpShMCreate: allocated tm_adm_list at 000000000EE783A0
    DpShMCreate: allocated tm_adm at 000000000EE78400
    DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
    DpShMCreate: allocated comm_adm at 000000000F3E3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
    DpShMCreate: allocated gw_adm at 000000000F46ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000F46ACE0
    DpShMCreate: allocated wall_adm at 000000000F46ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Sun Nov 16 16:56:07 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( ESITV016LAB) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >ESITV016LAB_XCR_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    Sun Nov 16 16:56:47 2008
    ERROR => DpHdlDeadWp: W0 (pid 1608) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 3940) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W2 (pid 636) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W3 (pid 3484) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W4 (pid 3504) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W5 (pid 1108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 3512) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W7 (pid 3592) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W8 (pid 3616) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W9 (pid 3608) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => DpHdlDeadWp: W10 (pid 3368) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => DpHdlDeadWp: W11 (pid 1388) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => DpHdlDeadWp: W12 (pid 3276) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W13 (pid 1256) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W14 (pid 3400) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => DpHdlDeadWp: W15 (pid 2376) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => DpHdlDeadWp: W16 (pid 3032) died [dpxxdisp.c   14532]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:56:57 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Sun Nov 16 14:56:57 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     1608 Ended         no      1   0        0                                                                         
    1 DIA     3940 Ended         no      1   0        0                                                                         
    2 DIA      636 Ended         no      1   0        0                                                                         
    3 DIA     3484 Ended         no      1   0        0                                                                         
    4 DIA     3504 Ended         no      1   0        0                                                                         
    5 DIA     1108 Ended         no      1   0        0                                                                         
    6 DIA     3512 Ended         no      1   0        0                                                                         
    7 DIA     3592 Ended         no      1   0        0                                                                         
    8 DIA     3616 Ended         no      1   0        0                                                                         
    9 DIA     3608 Ended         no      1   0        0                                                                         
    10 UPD     3368 Ended         no      1   0        0                                                                         
    11 ENQ     1388 Ended         no      1   0        0                                                                         
    12 BTC     3276 Ended         no      1   0        0                                                                         
    13 BTC     1256 Ended         no      1   0        0                                                                         
    14 BTC     3400 Ended         no      1   0        0                                                                         
    15 SPO     2376 Ended         no      1   0        0                                                                         
    16 UP2     3032 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Sun Nov 16 14:56:57 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    2
    2000
    6
    6
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    Dump of tm_adm structure:               Sun Nov 16 14:56:57 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Sun Nov 16 14:56:57 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:02 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >ESITV016LAB_XCR_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4076) (SOFT_KILL)
    Stop icman
    killing process (3800) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4076  HANDLE:388)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:03 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4076  HANDLE:388)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:04 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:06 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:07 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:08 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:09 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:10 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:11 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:12 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:13 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3800  HANDLE:396)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=421
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Sun Nov 16 16:57:14 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3800  HANDLE:396)
    DpStartStopMsg: send stop message (myname is >ESITV016LAB_XCR_01                      <)
    NiIMyHostName: hostname = 'ESITV016LAB'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Sun Nov 16 16:57:15 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12168]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 312 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 312 (pos=2)
    SiSelNRemove: removed sock 312
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 312
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 2260) [dpxxdisp.c   10421]
    Good Bye .....
    BR,
    Kari

    Hi,
    here is the right log content:
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Mon Nov 17 10:24:39 2008
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M sysno      01
    M sid        XCR
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    144
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        2184
    M
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2184) [dpxxdisp.c   1305]
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M 
    M Mon Nov 17 10:24:40 2008
    M  DpShMCreate: sizeof(wp_adm)          25168     (1480)
    M  DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010E70050, size: 6348592)
    M  DpShMCreate: allocated sys_adm at 0000000010E70050
    M  DpShMCreate: allocated wp_adm at 0000000010E72150
    M  DpShMCreate: allocated tm_adm_list at 0000000010E783A0
    M  DpShMCreate: allocated tm_adm at 0000000010E78400
    M  DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
    M  DpShMCreate: allocated appc_ca_adm at 00000000113E2060
    M  DpShMCreate: allocated comm_adm at 00000000113E3FA0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 000000001146AC30
    M  DpShMCreate: allocated gw_adm at 000000001146ACB0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 000000001146ACE0
    M  DpShMCreate: allocated wall_adm at 000000001146ACF0
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Mon Nov 17 10:24:41 2008
    M  ThInit: running on host ESITV016LAB
    M  calling db_connect ...
    B  create_con (con_name=R/3)
    B  *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
    [dbcon.c      4537]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10468]
    M 
    M  Info for wp 0
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server ESITV016LAB_XCR_01 on host ESITV016LAB (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Nov 17 10:24:41 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10688
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 2184) [dpnttool.c   327]
    BR,
    Kari

Maybe you are looking for

  • Using parallels with multiple OS partitions

    Hello i have OSX, XP and Vista on my macbook pro. is it possible to use parallels or fusion to access these while in OSX. or can you only do this with a single bootcamp OS installation? thanks John

  • Airport express 6.3 speakers will not connect in itunes sometimes

    I set up 2 airport express for a friend and they are conf to connect to his wireless net. Both work fine with printing and Airtunes speakers will play from several tested iPhones. However iTunes gives me a connection error when trying to play to the

  • P_ABAP_70 vs C_TAW12_70?

    Hello everyone! 1) Does anybody know whether I have to pass C_TAW12_70 before I can take P_ABAP_70? Or I can take P_ABAP_70 without any previous exams? 2) On the page about P_ABAP_70 it's said that "Professional Certifications are targeting profiles

  • Error in profit centre document

    Hi All, We have created a billing doc. corresponding accounting document, profit centre document are getting generated. But if we look at the profit centre doc no values are found and it is a blank completely. Can any explain us what is the cause res

  • Lion free upgrade

    I purchased a new iMac recently and bought Lion on the AppStore. Then I realized that I am eligible for free upgrade. Is there any way I could get my money back?