USM-SA1 Series Compatibility

Hi, I wanted to know if the USM-SA1 OTG usb drives are compatible with the Xperia Z3/Z3+ series. Thanks,K

Hello there, Kshehab! Yes, the Sony USM-SA1 is compatible with the Sony Xperia Z3 and the Sony Xperia Z3+! You may check this link for further compatibility information: http://www.sony.net/Products/Media/Microvault/products/usm-sa1/compatibility/index.html Best regards,

Similar Messages

Which is the better lens for wildlife, sport action canon 70-200 is usm ii series L or Canon 100-400

Which would be a better for wildlife and sport action Canon 70-200 mm is usm ii serie L f/2.8 or Canon 100-400 mm f/4.5-5.6?

On what camera? It makes a big difference depending upon whether you are using full frame or a crop camera.
Also depends upon the particular sports and type of wildlife most commonly involved, how much reach you might need. Outdoor, daytime sports vs indoor and nightime sports is another key factor.
On a crop camera a 70-200 is generally a lot more usable than it is on full frame, for sports and wildlife. An f2.8 lens and 70-200 might be ideal for indoor sports even with a crop camera. It also might be plenty for large game that can be pretty closely approacted. But for small and more shy wildlife, sports on a larger playing field, you'll more likely need the 100-400. But as an f4.5-5.6 lens that's going to be more of a daytime-only lens.
The 100-400mm is unusual in that it's a push/pull zoom. This can be particularly fast to use and makes the lens popular among photograhers shooting fast moving subjects such as birds in flight and air shows.
If you give serious consideration to the 70-200/2.8 IS II in combination with teleconverter EF 2X III, I'd suggest renting and trying them toghether first. The reason is that a stronger 2X teleconverter has more effect on image quality than a weaker TC. The specific combination of the 70-200 Mark II lens and the 2X Mark III TC is pretty darned good.... better than the combo earlier versions of each item. But whether or not it's up to your expectastions is a judgment call only you can make. So it might be wise to rent before you buy, just to be sure.
If instead you start to take a hard look at the 100-400mm, once again you might want to rent it and give it a try. Some people really like the push/pull zoom design. Some don't. (I'm one of the latter... but to be fair this is largely an old prejudice from trying to use that type of zoom in the past, long before IS. I always found push-pull zooms hard to get a steady shot with.... But the 100-400's IS goes a long way toward solving that problem.)
And those two really aren't your only choices.
Personally I use a pair of crop cameras (7D), most of the time one fitted with a 70-200, and the other fitted with a 300/4 IS, sometimes in combination with an EF 1.4X II teleconverter. Or, when I don't need to be mobile and can set up a tripod, I'll use a 300/2.8 IS, both by itself and with EF 1.4X II or 2X II teleconverters.
Another possibility is two lower cost lenses... such as a 70-200/4 IS in combination with a third party lens such as the Sigma 120-400 OS or 150-500 OS. Those lenses are considerably less expensive than the 70-200/2.8 II and the 100-400, respectively. You might be able to afford both and still find they meet your needs very well.
I use the 70-200/4 IS, as well as a copy of the first version of the 70-200/2.8 IS, and they are excellent lenses too. No doubt about it, the 70-200/2.8 IS Mark II is top of the heap and exceptionally good... but rest assured those other 70-200s are no slouches.
If using a full frame camera, for large field sports and more distant, smaller wildlife.... better start saving up. You're going to need one or two of the super telephotos, such as the new EF 200-400/4L IS 1.4X that I'm saving up for!
p.s. By the way, if not already doing so you might want to try Back Button Focusing. It's a very popular technique among sports/action and wildlife photographers. I've been using it for years for virtually everything I shoot, and can't imagine using any other method now.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

NF3 & 6800(series) compatibility ???

here is a nice long thread to read for anyone who has a 6800(series) VGA crad that freezes on Directx games on an nforce3 chipset.
NF3 & 6800 compatibility
btw i have found that fastwrites do up my 3dmark scores so running with them off is not acceptable for me.
I can't wait for my MSI K8T NEO2-FIR motherboard.

Here is the old thread 6800 cards-a no-no with nforce boards?
My Asus 6800GTTD (16/6) run just fine with Dfi Infinity and Asus A8V ~410/870 but with Neo2 I had to run it ~350/850 so I switched it to X800 Pro Vivo (see sig).

N series compatibility in USA & Canada

hi. can somebody to tell me exactly if one of the following N series models as: N80, N73 ME, N95, bought in United Emirates, are full compatible in USA or Canada? I'll do appreciate for any answer. I wanna also to mention: these all models are not locked in any network

To my knowledge, Nokia has not released a single phone compatible with the funky 3G frequencies in the US. And the only SIM card enabled (UMTS not WCDMA) network in the US is AT&T Wireless (formerly Cingular). Verizon and Spring both have 3G capability, but they are WCDMA (meaning only their phones).
I use my N95 (and previously an E70) with T-Mobile and get access to EDGE. It's no 3G, but I am not holding my breath. In America, mobile phone technology is still in the 20th century.
Anyway, in the US, you can use an unlocked phone with AT&T Wireless and T-Mobile. In Canada, I believe Rogers is one provider on a GSM network and there may be others.

[Athlon64] HyperX and Neo2 Series Compatibility?

Hey, I recently got a 1gb set of PC3200(KHX3200AK2/1G) for my K8T Neo2 Series Board and they don't work. The system stops at early chipset initialization. I talked to Kingston and MSI, hey both gave me things to try; changing the CAS latency to 3, Enabling the IT timing; and still no luck. They both said they should work. Any ideas or things I'm doing wrong? Cheers
System- VIA K8T800 Pro Chipset Based- K8T Neo 2 series
- AMD 64 3000+
- 512 PC3200 400mhz Kingston (trying to get the hyperx to work)
- ATI 9550 AGP Graphics Card

https://forum-en.msi.com/index.php?topic=84584.0
https://forum-en.msi.com/index.php?topic=84599.msg603441#msg603441
https://forum-en.msi.com/index.php?topic=88896.0
Sticky posts contain a lot of superb info. One only has to click and read...

Intel Pentium D 9xx series Compatibility with MSI 955x?

Hi All,
I just wanted to get some feedback from others who may be running an Intel Pentium D 9xx series processor on a MSI 955x board. What processor are you running and have you had any compatiblity problems, strange quirks, etc?
I found this link as well but wanted to get some real world opinions!
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=664&kind=1
Thanks!!

They are compatible and won't have any issues.

Hp pavalion g6 compatable with windows 8

is my pavalion g6 series compatable with windows 8 its a 64bit system

Hi,
Microsoft has a tool which is similar to Windows 7 Advisor for Windows 8 called Windows 8 Upgrade Assisstant . Please download the Assisstant and run on your machine:
http://windows.microsoft.com/en-US/windows-8/upgrade-to-windows-8
Please also read this:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03451712
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Interop Matrix W2012 R2, C-Series C220-M3 UCSM managed

Interop tool http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
Would like to know, if C220-M3 managed by UCSM 2.2.1b is supporting W2012 R2
Q1: I cannot specify C220-M3 ?? why
Therefore I look at Standalone C220-M3
Q2. What is the logic here ? Are the relevant driver embedded in the W2012 R2 iso ? whereas for B-Series, I have to install enic/fnic ??
Please clarify

Hello Walter
From the PDF file
Hardware and Software Interoperability for UCSM Managed Servers in Release 2.2(1)
http://www.cisco.com/en/US/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2.21.pdf
-------- snip ---------
For C-Series servers managed by UCSM, unless otherwise indicated in this document, the supported firmware
and drivers are those listed in the 1.5(4) C-Series Compatibility guide, l
I believe HCL tool will list it once standalone server HCL for 1.5.4 version is published
Padma

Is the Mac iBook G4 series compatible with iCloud?

Is the Mac iBook G4 series compatable with iCloud? Currently it has mobile me

No.
System requirements for iCloud - Apple Support

Boa noite. O problema ocorre com qualquer navegador. Hoje liguei para a Microsoft, para pedir ajuda na configuração do e-mail que aparece o erro #872. O técnico

Boa noite.
O problema ocorre com qualquer navegador.
Hoje liguei para a Microsoft, para pedir ajuda na configuração do e-mail que aparece o erro #872.
O técnico entrou remotamente e fez todos os estes possíveis e imagináveis.
Fiquei remotamente durante uma hora e trinta minutos. E ele não conseguiu resolver.
O problema não é com o outlook é com o GMAIL.
Após vários testes, agora aparece a seguinte mensagem de erro:
“Servidor respondeu: 421 4.7.0 Temporary S” pelo outlook e pelo GMAIL (#872)
O técnico da Microsoft informou que o problema é com o GMAIL.
Por favor estou desesperada, desde 10 de julho de 2014 não recebo e envio e-mail da conta:
Tenho essa conta para trabalho e pessoal, isso esta causando muito prejuízos.
POR FAVOR ME AJUDE A RESOLVER ISSO.
Desde já muito obrigada
Elisabeth
De: ****** [mailto:******] Em nome de Cesar JB via Fórum de Ajuda do Gmail
Enviada em: segunda-feira, 28 de julho de 2014 07:57
Para: *****
Assunto: Re: ERRO (@872)
Olá Elisabeth,
O mesmo problema ocorre quando você utiliza um navegador (Chrome, Firefox ou Internet Explorer) ou somente quando você utiliza um programa cliente de email (ex: Outlook).
Se estiver usando um navegador, experimente fazer a limpeza do cachê e veja se a referência abaixo sobre erros no Gmail te auxilia.
Abraço,
Cesar JB
On Sunday, July 27, 2014 10:48:00 PM UTC-3, Elisabeth Reboucas wrote:
gmail
recebo uma mensagem de erro. (@872).
sempre que mando email da minha conta principal. POR FAVOR QUEM PODE AJUDAR.
A RESPOSTA POSTADA EM 20/07/14 NAO RESOLVEU O PROBLEMA.
"Erro
Ops... ocorreu um erro de servidor e seu e-mail nao foi enviado. (#872)
OK"
a mensagem de erro esta escrita acima.
Por favor preciso de ajuda.
Obrigada.
Elisabeth
<hr>
''emails removidos para privacidade dos mesmos'' - Diego Victor

Boa Noite Elisabeth,
Sua explanação sobre o seu problema está um pouco confusa e com poucas informações, o que dificultada a melhor resposta e/ou a resposta correta. Porém que você está com problemas no uso do Gmail pelo seu aparelho Mobile, eu pesquisei alguns problemas e pré requisitos para que esse uso seja feito sem maiores complicações.
Você pode acessar o Gmail pela Internet em navegadores como Google Chrome, Firefox, Internet Explorer e Safari no seu computador. Para acessar o Gmail com um navegador instalado em um dispositivo móvel, esse dispositivo deve atender a estes requisitos mínimos.
'''Requisitos Mínimos'''
Para acessar o Gmail para celular, o navegador de seu celular deve atender a alguns requisitos mínimos.
Primeiramente, verifique se seu navegador é compatível com XHTML. Caso não tenha certeza, visite http://www.google.com/xhtml e faça uma pesquisa. Se não funcionar, seu navegador pode não ser compatível com XHTML.
Você pode entrar em contato com seu provedor de serviços para celular para verificar os seguintes requisitos:
1. Seu navegador deve ter os cookies ativados e sua rede também deve permitir cookies. A configuração de cookies geralmente está localizada nas configurações do navegador de seu telefone.
2. Sua rede deve permitir tráfego SSL seguro.
3. O navegador de seu celular deve ter um comprimento de URL de 2000 bytes.
4. O navegador de seu celular deve permitir redirecionamentos de 10.
Para usar o Gmail, ative os cookies e o JavaScript'''
Independentemente do tipo do seu navegador, você precisa estar com os cookies ativados para usar o Gmail. Além disso, se seu navegador for compatível, ative o JavaScript. Pesquise instruções no Google sobre como ativar os cookies e o JavaScript no seu navegador.
Espero que com isso você resolva o seu problema ou a menos tenha ajudado a ajuda-lo.
Um grande abraço.

New Msi Neo2 Platinum....many problems

Here`s my setup:
A64 3200 939 winny watercooled
Msi Neo2 Platinum bios ver 1.4 vcore 1.50 HTT x4
2x512 corsair xmspc3200xlpt timings 2.5-3-3-7 1T vdimm 2.85 235x10 fsb 1:1 in the first 2 slots next to the cpu and tried the last 2 also
BFG 6800 GT OC 256mb 1.65 volts
SB Audigy 2 zs in the third pci slot
80 gig Maxtor
80 gig WD SE
Truepower 550 about 2 yrs old 12v amps are rated at 24a
6 case fans
waterpump is on the 12 volt rail
VC is on its own rail or leg
hdd`s and floppy are on thier own rails or leg
Fans and water pump is on its own rails or leg
Cd rom and burner is on its own rail or leg
i ran memtest on my on my sticks seperate and together and passed at 250 fsb 1:1 for 5 hrs and they are a matched set
im getting random errors,device driver errors and crashes in HL2 and in 3dmark05 and in 03 i get as high as 2500mhz and my rig reboots itself tried changing ram timings to 3-3-3-8 and no change
curious my psu not enough for the job amp wise ? i checked my 12v5v and 3.3v rails with a dvom and im getting 11.96 on the 12v rail under load, 4.98 under load and 3.28 under load but the bios reads about .20 to .27 under what my meter says
this psu ran flawless with a NF7-S ver2 ,barton xp2500 mobile@2477mhz and a 9800 pro
im new to the board but not new to o/cing and this board has me baffled any ideas would be helpful

Sounds like you are suffering from the NF3 + 6800 combination problem.
Theese things that gives troubles are dx9 it seems.
Interesting thread:
NF3 & 6800(series) compatibility ???

Required compat RPMS for p- series machine

Hi,
I am planning to test one of the products on IBM p series machine(64 bit). On p series machine i am able to install oracle 10g without any problem ( actually i am not able to get the compatability RPMS what oracle document has suggested under software requirements).
But when i am testing the product, the modules which are using sqlapi's are not coming up because of segmentation fault.
If any one can say the solution or provide some information where the following RPMS will be available i would be thankful.plz post the reply to my personal id as it is urgent(if u don't mind)
compat-db-4.0.14-5
compat-gcc-7.3-2.96.128
compat-gcc-c++-7.3-2.96.128
compat-libstdc++-7.3-2.96.128
compat-libstdc++-devel-7.3-2.96.128

[email protected] is my e- mail id

Creative Audigy 2 ZS digital OUT connector compatibility with Bose Lifesytle Series

Hi all,
I am a SoundBlaster fan and have been using their SB cards for a long time.
I recently got a new SoundBlaster 2 ZS Card from my friend, I hooked it up to a 5. Logitech Speakers (analog), it works fine.
I tried connecting it to my Bose LifeStyle (35) Series II system.
I bought a Phono plug to /8" Mono Plug Cable and connected the Digital Out (of Audigy) to the Coax digital-In of Bose System.
There's no sound.
I tried many combinations like,
SPDIF passthru,
Changing Sampling Rate
Re-installing the Drivers
I know well that the BOSE system works fine, as I am using the Digital Coax connector to connect to my DVD Player and I also connect it to the SPDIF connector on the ASUS System (onboard 5. audio). I have'nt faced any problems there.
The only difference between the DVD Player / ASUS system and Audigy is the the first two use a standard SPDIF while Audigy does not.
I am wondering if this connector difference is a problem or is it a compatibility issue between Bose Lifestyle 35 and Audigy 2ZS.
I am posting this to see if anyone had similar experience, or have any suggestions.
Thanks
Bobby

Hi everybody, I have a similar question:?I'm building a mediacenter pc, and I need a Creative audio card for carry out 5. surround signal from the pc to my Bose Lifestyle SPDIF connector... case is similar to above, except for I don't have a Soundblaster card embedded in the motherboard... ?I've read something in the Forum, but still can't figure out which sound card should be the best for me AND which cable should I use to connect them... Any help will be really appreciated...
Many thanks and sorry for my english... :smileytongue:

WiSM compatibility with 3600 series APs

Hi All,
We have WiSM cards installed at rel 7.0.116.0 currently and i'm wondering if they'll support the newer 3602I & E AP variants.
I think I know the answer to this already but, before you ping the release notes over to me for he later revision of WiSM2 software, I'm curious to know if anyone has actually TRIED to use the 3602 series with eh older WiSM cards?
We have just deployed 14 of the newer APs and i'm having a sinking feeling over whether or not i'll need the cabling guys to swap them all out!!!
HELP!

The 3602's don't support any code that the WiSM can use. v7.2 is required for the 3600 and the WiSM 2, 5508, 2504, 7500 and 8500's will support these AP's. The Converged access wlc's will also too.
Here is a compatibility matrix for all wireless equipment.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Sent from Cisco Technical Support iPhone App

I need to download a driver for the 5069 printer. which series is compatable?

without a disk, can one of the other series printer download be used for the 5069 photosmart printer?

I assume you mean the D5069.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=1843569&

USM-SA1 Series Compatibility

Similar Messages

Maybe you are looking for