Usmm: database error when reading the table TUMRES

Hi folks,
I´m getting this error when i´m trying to run the EXPORT to LAW FILE on a system measurement. What could be the problem because:
1. on my User classifications all my users on the column STATUS are not GREEN but silver like deactivated.
2. On the column CONTRACTUAL USER TYPE all are TEST
3. On the column CLASSIFICATION TYE TEXT are set as DEFAULT USER TYPE
4. When i run the System Measurement Statistics they show me a warning windows telling me that 1 MEASUREMENT JOB TERMINATED and when i get i can see that the ICM - Incident and Commissions Management is the one that has terminated.
5. There is nothing on the SM21 related with that.
6. The TUMRES table exist I checked with tcode SE16 but I could not certify if there is content or not.
7. On the tcode LICENSE_ADMIN  the COMBINE USERS and CONSOLIDATE ALL DATA are green but I need first to IMPORT DATA FROM SYSTEM.
Please what can i do,
nelson\

Hi Nelson,
This error message  "Database error reading table TUMRES" would occur usually  when any background jobs get terminated while performing measurement using transaction USMM.
I recommend you implement Note 1674661 - USMM: Application 900 (ETM) measurement result in short dump. and try to measure again
Regards,
Juan

Similar Messages

  • Error when reading the DDIC-data for table

    Hi Tobias
    We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
    To test initial load, we stopped replication for an existing table and then started replication for the same table.
    Mass transfer id connects ECC system to BW on HANA system.
    Replication errored with the following message:
    Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
    Looking for your guidance.
    Kind Regards
    Kamaljit Vilkhoo

    Was able to solve using oss note 1972533.

  • Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

    Hello All,
    While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
    Error 1 in update.
    Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
    Please let me know how can it be resolved.
    Regards
    Rohit Parti

    The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
    Error analysis                                                      
        You attempted to access an unassigned field symbol              
        (data segment 32821).                                                                               
    This error may occur if                                         
        - You address a typed field symbol before it has been set with  
          ASSIGN                                                        
        - You address a field symbol that pointed to the line of an     
          internal table that was deleted                               
        - You address a field symbol that was previously reset using    
          UNASSIGN or that pointed to a local field that no             
          longer exists                                                 
        - You address a global function interface, although the         
          respective function module is not active - that is, is        
          not in the list of active calls. The list of active calls     
          can be taken from this short dump.

  • Error when reading the ID of the business system from the SLD

    Hi,
    I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
    The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
    What could have gone wrong. Thanks in advance.
    Srini

    Hi,
    :::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
    1) SAP_XI_Developer_ABAP +
    2) SAP_XI_Developer_J2EE  +
    3) SAP_XI_MONITOR_ABAP   +
    4) SAP_XI_MONITOR_J2EE    +
    5) SAP_SLD_ADMINISTRATOR +
    6) SAP_XI_BPE_MONITOR_ABAP +
    7) SAP_XI_DEMOAPP
    8) SAP_XI_DISPLAY_USER_ABAP +
    9) SAP_XI_DISPLAY_USER_J2EE +
    Regards
    Sesh

  • Error when reading the access data for the Adapter Engine

    We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.xpd.dbcixpd</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Pls suggest if anyone has gone thru same problem.
    Regards
    Amar

    I got the same problem while using RFC lookup.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.tx1.netweaver</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Any idea ,when we get this error usually.

  • Error when reading the access data(URL,user, password) for Adapter Engine

    Hi,
    We are getting this error in production system 
    "SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
    Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
    Its urgent.  We are in support project.
    regards,
    john

    Hi jhon,
              please check the following threads to resolve the problem.
    AE_DETAILS_GET_ERROR
    Error : no_adapter_engine_found: Unable to find Adapter Engine
    regards
    mahesh.

  • Error when reading the data of infoprovider

    Hello,
    I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
    Error reading the data of InfoProvider ZDPPTGR1
    Message no. DBMAN305
    Diagnosis
    Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
    It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
    Procedure
    Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
    If an SQL error is listed in the previous message, see the procedure for SQL errors.
    Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
    Thanks for answering!
    Kind regards
    Heinz

    Hi,
    Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
    Remote cube - uncaught exception
    DBMAN350 Error reading MultiCube data over aggregate
    Error reading the data of InfoProvider 0TCT_VC01
    Regards,
    Arpit

  • I am getting an error when reading the preview cache and the program shuts down.

    I had to reload Lightroom on a new computer and after I did that it gives me an error when reading from its preview cache and then it shuts the program down.  How can I fix this problem?

    Delete the preview cache ... it is a folder whose name ends with Previews.LRDATA in the same folder as your catalog file.

  • RSA7 Delta Quere error when reading the data

    I am working on BW3.5
    I have six datas sources which extracts data from R/3 to BW
    one of the datasource is failed. when checked RSA7, selected the failed datasource and executed, throws the short dump error.
    I have analysed the error.
    The shortdump is creating when it is reading data from the datasource.
    There is a problem in the standard RFC table TRFCQOUT and ARFCSSTATE.
    The table TRFCQOUT has one record for Payment for the ARFCTIME which is missing in the ARFCSSTATE table.
    The table ARFCSSTATE has no record for the payment
    When extracting data for the payment data source short dump error is thrown because of mismatch entries in both the tables.
    Kindly let me know what exactly the tables are taken into account when the data is moved from R/3 to BW
    I think if the data can be deleted from the TRFCQOUT table then if will go fine but I am sure what could be implications
    Kindly let me know how best I can resolve the issue.

    Hello Pavan ,
    You can delete the Records from Deleted from TRFC* and the load will be fine BUT you are not suppose to do that, this simply would mean that we have lost the record , hence this is not advisable.
    Instead check and analyse the record there to see if :
    1.The record is an old one hence not useful anymore
    2.The record has correct values that are suppsoed to be
    If the record seems to be obviously redundant or useless we can delete it , else the correction should eb done on the source system side.
    Regards,
    Tapish

  • Error when displaying the table

    hellow,
        here i have to .htm pages, in first page i am entering the table name, and it has to display the table details in second page.
    but in second page i am getting error like field catalog not found
    plz help me.
    with regards
    babu

    hi babu rs
    Please post the code of the two bsp page with the layout as well as abap code. Only than anybody can help you.

  • Database error when updating table ADRC

    Hi,
    We are on ECC 5.0 & are facing a problem whille maintaining anything relevant to table ADRC.
    For eg., if we try to maintain storage location or create a vendor code (XK01), for some inputs it works ...but most times the update just terminates with a message "Database error when changing table ADRC".
    Pls. help.
    Thanks,
    Saba.

    Hi
    You can refer to following SAP Notes in case they help:
    385440   Repairing inconsistencies in Customizing addresses
    417809    Customizing objects display incorrect addresses
    186910    Customers / vendors with incorrect address
    Otherwise i want to know more about the error you are getting to help you in better way.
    Thanks and Regards
    Esha Rajpal

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

  • I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath  that is "Lightroom will attempt to fix this problem the next time when it launches."

    I'm unable to open up Lightroom 5, I get this message in a pop up box: "Lightroom encountered an error when reading from it's preview cache and needs to quit" Underneath  that is "Lightroom will attempt to fix this problem the next time when it launches."  It hasn't, what should I do? Thanks Shawn (Irish Se7en) .

    Can you try to rename (not delete!) the folder named "YOUR_CATALOG_NAME Previews.lrdata" and restart Lightroom?

  • I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

    I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

    Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

  • It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

    how do i fix this. It says Lightroom encountered an error when reading from a previous cache and needs to quit. Light room will attempt to to fix the problem the next time it launches.

    Have a look at this thread.
    Lightroom encountered an error when reading from its preview cache and needs to quit.  Lightroom will attempt to fix this problem the next time it launches"."

Maybe you are looking for