USMT 4.0 Restore not happen while windows 7 migration through MDT 2012

As we are using MDT 2012 Update 1 with USMT 4.0 for XP to 7 migration. Capturing process is happened and save the user data to given network but restore will not happen. I am not found any restore log or error in the migration. I am unable to access
the Network Migstore path while the migration process, which i am getting prompt for user name and password.
As well as I have given credentials manually and Checked the remember the password again USMT restore not happen.
I have configure the bootstrap.ini with Domain credentials for access the network share. however i am MDT unable resolve the network path. Kindly help me to rid out of this issue.
Thanks for you understanting and Support.

Similar Messages

Automatic clearing not happening while doing invoice cancellation

Hi All,
When I reverse a billing document [normal invoice], the accounting document which gets generated is not getting cleared with the previous accounting document. The accounting document type in both original and reversal is u2018DDu2019. I have also checked the reversing document type settings in OBA7.
The above scenario is working fine with one company code [ABC], but with other company code [XYZ] the auto-clearing of accounting documents is not happening. The sales document types in both the cases are same.
On further analysis, I found that the reversal accounting document is having posting key 11(credit memo) instead of 12(Reverse invoice), but in other company code[ABC] the posting key is appearing correctly in the reversal accounting document i.e. posting key as 12.
Can you please confirm if this happening due to incorrect posting key? Also kindly suggest how this can be corrected?
Thanks in advance.
Dheeraj Tolani

Dear,
When I post the reverse billing, this message info me:
Automatic clearing of billing document and canc. doc. 90601784 not poss.
Automatic clearing of billing document 90601783 and canc. doc. 90601784 not poss.
    Message no. VF208
Diagnosis
    The system cannot clear billing documents and cancellation documents
    because, for example individual item updating is deactivated.
System Response
    The billing document can be created.
Procedure
    The FI documents are cleared manually
of curse, this message only occurs in company 1500, and in the other company 2000, the reverse billing can automatic clearing, and have nothing message occurs.

Skip Obtaining drivers from Windows Update using MDT 2012

Does anyone know how to disable windows from obtaining drivers online after MDT is done imaging, the reason why I ask is that after the image is done, it takes forever for a dell keyboard to install drivers because windows is searching online. I would like
to turn that setting off using MDT 2012 if possible.
Thanks,
Bobby

Dynamic update only works when you are upgrading from an existing OS, and it only downloads critical drivers; network, video, audio, and mass storage. It wouldnt help in a bare metal build and probably wouldnt have anything to do with plug and play detecting
a keyboard.
http://technet.microsoft.com/en-us/library/ee126093(WS.10).aspx
Our online driver search hasnt worked in a while, since they began configuring our browser with a .PAC file pushed down via GPO. WinHTTP can't pick up settings from the PAC file, and we can't hard code the settings into the OS, because there are
a number of different proxies depending on where in the world you are.
I actually hard code proxy and WinHTTP settings while I build the reference image and then remove them, just so I can do automatic updates. It's amazing how much more work "security" causes sometimes.

When printing page data in Schwab, the font is so tiny it's almost invisible - this does not happen in Windows Exploror.

On 2/20/2013 all printing was normal. On 2/21/2013 not only did the printing not work, but PDF files did not show up properly. Is this a new version of Firefox? I got the PDF reset so that works now, but not the printing. In Comcast email, the date field shifts way to the right and forces the font smaller. When I uncheck "shrink to fit" it does not wrap the text but rather chops it off when I increase the font size.
Today I tried printing pages from Schwab using their "Print Page" button which always worked in the past but today it was unreadable.
Can I go back to the previous version of Firefox?

https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox

How to make Parameter field not mandatory while running CFL through SAP B1

Hi Experts.......
I have a small doubt if anybody can help me.......
I have created a simple report for testing purpose by taking table OITM and it is diplayng CFL symbol in B1 scressn when I import. Upto this it is working fine and showing correct input.
Now I made some changes according to my logic is that When I select any value in condition parameter say any Item Group it shows me output for that particular ItemGroup. And when I select nothing in Parameter then it is displaying all data from all the group and this si what I want. But when I import the same CR in SAP and running same report it is not allwoing me to paas Null value so that I can get all the data as output.
This is giving right result if I dirctly run CR by refreshinh Parameter but same thing I run from SAP and put the parameter field blank it is giving me error that Parameter (ItemGroup) is mandatory
Can anybody assist me how to solve this?
Thanks & Regards,
Rahul Moundekar

Hi
I had the same issue. As noted by Julie SAP published a workaround.
See my original thread post below. Go straight to the last entry.
Crystal in B1 8.8 - optional parameters not working
The problem is that when called from B1 the hasvalue command always returns true, hence the checking for nulls and spaces etc. as well.
You keep the parameter definition as Optional.
This works find for character fields, both single select and ranges, and I have gotten around it for numerics etc by using a SQL formula to cast these to character fields in the data being queried.
I have yet to be motivated enough to see how to code around this for multi valued fields.
Hope this helps.
Rob

HT4796 My PC is not installing the Windows Migration Assistant.

After I run the setup wizard the only thing that shows up is a shortcut in the start menu. No program. Any ideas on what is going wrong? Tried everything I could think of and no success.

Thanks but I'm following the instructions and its not working. Its an old PC I am transfering for my sister. Its XP though and I have mountain lion - so it should be working, but it is just spinning, not finding the PC. The only trouble shooting provided is "to make sure they are on the same network". Its plugged into the ethernet cable so maybe that doesn't count? I'd rather not have to run off and buy a wireless key just for this!

After closing Firefox with the red "x" in the upper right corner, every time I start firefox again it launches the last page(s) I was (yes I have it set to go to homepage in my settings, this does not happen if I close through the menu).

I have a Win 7 PC using FF 4.0.1.

I have noticed something similar with my Macs. If I close with the red X, I get a popup message asking if I want to close the tabs or cancel. If I close with Firefox > Quit or Cmd-Q, I get a message asking if I want to Save and Quit, Quit, or Cancel. The thing is, using the red X, is just supposed to close the interface, not the underlying process.

Failed to install drivers in Windows Vista using MDT 2012 update 1

I am trying to deploy physical machine with Windows vista along with drivers. After completion of deployment i see deployment is successful with no error and warnings, but it still do not install driver in the machine. To test weather i have selected correct
driver i checked manual installation of drivers and this install the driver in the machine. But the drivers are not installing when i am tried to install driver using MDT. In windows 7 and Windows XP drivers are installed correctly but not in Windows Vista.
I have shared my log files in one drive. Please look this and tell what mistake i am doing.
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!107
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!109
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!108
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!110
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!112
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!111
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!114
https://onedrive.live.com/?cid=BD291DD4A63B1353&id=BD291DD4A63B1353!113

Can you be specific as to what drivers are not installing? An issue that can be had when doing PNPEnum is that child devices of something that does not have a driver installed are not visible to the PNPEnum. A way to get around that is you can force the
injection of drivers that are not getting installed. Something like you can add a second Inject Driver step but, have it be a selection profile of drivers that always get missed because they are children.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Negative Value Fields Not Displaying on Windows XP / Adobe Reader 10+

Hi,
We have some PDF forms for invoices. At the bottom of the forms, there is a table with various totals (items total, discount total, restocking fee, etc).
This is a pretty strange one to me. Here is what I am seeing:
If the dollar amount is negative in those totals, the dollar value will not show up. It's only negative values, but it's consistent across all fields in this totals table. I've confirmed this by manipulating values in the debugger. So we would expect the table to look like this:
Items Total: 10.00 USD
Discount:    -1.00 USD
Amount Due:   9.00 USD
Instead we see:
Items Total: 10.00 USD
Discount:          USD
Amount Due:   9.00 USD
Even stranger, this only happens in our quality and production environments, not in our development environment. It only happens when the user chooses to print preview, not if the output is triggered in the background.
To further add to the confusion, it does not happen on Adobe Reader 9 or lower. It does not happen on Windows 7. This problem is reproducible only if the user is running Adobe Reader 10 and Windows XP.
I'm reasonably confident this has something to do with ADS, but I don't even know where to start looking.
Thanks
Bryan

The amount field in the interface is CURR 15.
On the form, the amount field is a decimal field BUT this field is hidden. The display field is defined as:
Thanks,
Bryan

Windows Vista is not installing using MDT 2012 update 1

I have created a media using selection profile in MDT 2012 update 1, but it is not deploying my physical machine. I get error message that Windows Cannot copy files required for installation. Make Sure all files required for installations are available.
However i have successfully deployed Windows & and Windows XP with MDT 2012.
I also used different iso image of vista but still i get same error message.

Looks like you have a *NEW* issue that is unrelated to this thread. Generally I recommend that you open a new thread.
How to Debug missing Drivers in MDT Litetouch
I see that you say there are *Problems* but you don't list which devices or drivers are missing.
From your Bdd.log file I can see that the following drivers are getting copied locally:
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6" "C:\Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315" "C:\Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A" "C:\Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9" "C:\Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4" "C:\Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4"
However I can't tell what the problem is.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

MDT 2012- windows update not working

Windows 2008 r2
MDT 2012
Steps I have completed:
1.applied patch for WSUS sp 3
2. made sure folder browsing is disabled in IIS7
3. restarted server
4. looking at the wsus console I see the new computer. they are listed in "Unassigned Computers" which is correct. These workstations have not been added to the domain yet.
Also, I am running LUP on the WSUS server
Any suggestions appreciated!
Ran solar winds WSUS diagnostic utility and received the error below
Forbidden (Incorrect proxy client configuration - use settings tab to test proxy configuration settings; may also be caused by misconfigured SSL implementation or access rights on WSUS server)

thanks for the reply,
When deploying an Image, get an ZTI error "Unhandled error return by ZTI windowsupdate. Object does not support this property or method?
Also, I noticed error message on WSUS server "Client computers are installing updates with a higher than 25 percent failure rate. This is not normal."
I ran the solar diag on the client and got this message:
Forbidden (Incorrect proxy client configuration - use settings tab to test proxy configuration settings; may also be caused by misconfigured SSL implementation or access rights on WSUS server)
I ran the solar diag on the server:
# Solarwinds® Diagnostic Tool for the WSUS Agent
# 3/26/2013
Machine state
User rights:                                       User has
administrator rights
Update service status:                             Running
Background Intelligent Transfer service status:    Running
OS Version:                                        Windows
Server 2008 R2 Standard Service Pack 1
Windows update agent version:                      7.6.7600.256 (WU Agent is OK)
Windows Update Agent configuration settings
Automatic Update:                                  Not found (There is no such key)
Options:
Not found (There is no such key)
Use WSUS Server:                                   Not found (There is no such key)
Windows Update Server:                             Not found (There is no such key)
Windows Update Status Server:                      Not found (There is no such key)
WSUS URLs are identical:                           Values are empty
WSUS Server Connectivity -- Connectivity check is impossible
Error description:                                 Connectivity check is impossible because
of invalid Windows Update Agent configuration

MDT 2012 - Failure 9701: Unable to find any version of USMT, unable to perform user state migration. Failed to run the action Restore User State. DNS Record does not exist. (Error: 000025E5; Source: Windows)

I am having trouble trying to capture a new Windows 8 image with WDT 2012.
My Setup -
Server 2012
WDS
MDT 2012
Windows 8 ADK
Hyper-V
I have created a new task and I can get the image to successfully deploy the image to a VM but it seems to fail at the Restore User State task.
Once the install Applications task has finished I added a Suspend task so I could customize the image a little. Upon resuming the task sequence is where the above failure message appears. I can see it gets to the next step (which is 'Restore User State')
but that seems to be where is crashes.
Does anyone have any advice on what I might be doing wrong or what I can do to resolve the above issue?

WAIK being installed was probably your issue so I wouldn't bother disabling the restore task. It is used to migrate user data, docs, and settings on refreshes, not new builds. It doesn't affect CopyProfile, just note that data will be migrated on refreshes so
some aspects may change, ie wallpaper, shortcuts, etc but what gets migrated with USMT can also be configured.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

My mac repeatedly reflows the screen and all the open file windows. why is this happening and how do I fix it? it happens while using Adobe InDesign 3.

this happens from time to time and I think in the past I have done a restart to make it stop. it's possible it only happens while using Adobe InDesign CS3 but I have not watched diligently enough to say for sure. the hard disk repeatedly, every 30 seconds or so, spins up and the entire screen reflows, finishing on the finder with open windows all opening in order. everything moves. then I need to go back to InDesign only to have it happen again. I don't necessarilly touch any keys or the mouse. as I type here it has stopped so maybe it really is an InDesign issue. does anybody know what's going on?

BDAqua and old comm guy,
thanks so much for the good advice. I used both of these and now the problem has stopped. first I checked the finder crash logs and yes, my finder had been crashing repeatedly.
next I removed the preferences files from the library, rebooted from the CD and ran disk utility to repair preferences. since then my computer has been stable.
there were some preferences that didn't get repaired when I ran disk utility. I am copying them here to refer to later if I need to. I don't understand what these mean to me:
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.

Restoring iPod Shuffle using windows vista if the device is not showing on itunes?

Hello fellow iPod users
I had this problem in the past, using different computers. Whenever I change the computer, this happens with my iPod... and the solution is always to restore it to factory default.
Currently my iPod shuffle first generation is showing on Windows (Computer), but not on iTunes. I am operating. I tried all the procedures on the support website (re installed itunes, quicktime and all other apple software, changed security software, plugged and unplugged the iPod, reinstalled the usb ports)... after I tried extra procedings such as restoring system and changing to another computer, but the problem seems to continue. When I turn on iPod, it flashes the green and yellow light.
When I plug another iPod on the computer, on the same USB port, iTunes recognizes it and it works perfectly.
So the problem seems to be the same that I had in the past, exactly the same.
My question then is this:
I try to use the restore utilty provided on apple website, but it is not compatible with Windows Vista nor 7. The option given by Apple is to use iTunes to restore the device, but hey, it doesn´t show on the device list, so how can I restore it if it doesn´t show???
I already had this exact same problem and the solution was always the same, but this time I don´t have an Windows XP computer available...
I also had iTunes run a device connectivity diagnosis and it reported all positive results, including: iPod found and USB ports checked.
Orion Noise is the iPod name, since its creation...
Here is all the diagnosis info (in portuguese.... esta sendo executado means is being executed, is working, properly...
funcionando corretamente means it is working correctly.... let me know if you would like anything else translated):
Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
LG Electronics R405-A.BPSPP1
iTunes 10.4.1.10
QuickTime 7.7
Número de Série do iTunes (edited to post in the forum)
iPodService 10.4.1.10 está atualmente sendo executado.
iTunesHelper 10.4.1.10 está atualmente sendo executado.
Dispositivo Celular da Apple service 3.3.0.0 está atualmente sendo executado.
Controladores Universal Serial Bus:
Standard Enhanced PCI to USB Host Controller. O dispositivo está funcionando corretamente.
Standard OpenHCD USB Host Controller. O dispositivo está funcionando corretamente.
Standard OpenHCD USB Host Controller. O dispositivo está funcionando corretamente.
Standard OpenHCD USB Host Controller. O dispositivo está funcionando corretamente.
Standard OpenHCD USB Host Controller. O dispositivo está funcionando corretamente.
Standard OpenHCD USB Host Controller. O dispositivo está funcionando corretamente.
Nenhum Controlador de Host FireWire (IEEE 1394) foi encontrado.
Informações do Dispositivo Conectado:
ORION NOISE (F:\), iPod shuffle executando versão de firmware 1.1.5
Número de Série: (edited to post in the forum... but it shows the right one)
Velocidade do Barramento: 61440
Cheers

Yes. See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Note you may have problem with some apps since some apps are not available in all countries.

Hi, dears i have a problem in itunes is not opening while i am trying to open it nothing happens i also tried to remove the sc info file but still i have the same problem

hi dera i have a problem whit itunes is not opening.
whil i am trying to open it nothing happens.
i also removed sc info files still i have the same problem
i any one know to how plz..........

You can try mp3val, that might fix them up.
Alternatively, if the files are in a standard <Artist>\<Album>\## <Name> layout then turn off Copy to iTunes Media folder when adding to library and use my script TagFromFilename to fill in the missing information.
iTunes often has an issue handling files with multiple tags. These may be introduced by other software such as Windows Media Player, Winamp, or MediaMonkey. Files may have both ID3v1 and ID3v2.x tags, and if I read the ID3 specification correctly, there is also support for multiple ID3v2.x tags each coded for a different language. When there are multiple tags iTunes behaviour can sometimes be unpredictable. In some cases edits to the metadata can be written to one tag, and visible in Windows Explorer, but iTunes insists on reading back unchanged values from the other. In such cases you can use Convert ID3 Tag > None several times followed by Convert ID3 Tag > v2.3 and whatever iTunes knows about the file will be written back to a clean tag. Embedded artwork is erased so needs to be reattached. Using my script CreateFolderArt before and then after the tag conversions is one way to workaround that part of the problem.
Also of note is that certain pre-defined genres are represented by a code number rather than text so that they can be presented in the local system language. There is always a possibility that Windows and iTunes have slightly different values in the look-up tables for some of these.
tt2

USMT 4.0 Restore not happen while windows 7 migration through MDT 2012

Similar Messages

Maybe you are looking for