Usr_full_name not showing up in adapter mappings

I saw this thread about not able to map usr_full_name.
Re: Full Name(USR_FULL_NAME) is not showing up in User Defn of  "OID Process"
Is this still the case
KK

Hi Dewan.Rajiv,
is there any prediction of Oracle making this field available in the mappings?
Thanks in advance!
Cheers

Similar Messages

  • Sender File Adapter Not Showing in Decentral Adapter Engine

    Hi,
    We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
    However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
    I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box) 
    Here are the paramters I defined for the Sender File Adapter:
    - Transport Protocol: File System (NFS)
    - Message Protocol: File Content Conversion
    - Adapter Engine: (new Adapter Name)
    Source Directory: (
    server/drive/path)
    File Name: purchaseOrder.txt
    Quality of Service: Exactly Once
    Poll Interval (secs): 60000
    Poll Interval (msecs):
    Retry Interval (secs):
    Processing Mode: Archive
    Add Time Stamp (checked)
    Archive Direcotry: (
    server/drive/path/archive)
    Process Read-Only files: (not checked)
    Processing Sequence: By Name
    Fiel Type: Text
    File Encoding:
    Operating System Command:
    Additional Files (not checked)
    Content Conversion Parameters
    Document Name: MT_Request_File_Data
    Document Namespace: http://nxy.tots/fg_admin
    Document Offset:
    RecordSet Name: Purchasing
    RecordSet Namespace:
    RecordSet Structure: Purchase_Record,*
    RecordSet Sequence: Ascending
    RecordSets per Message: 1
    Key Field Name:
    Key Field Type: String(Case-Insensitive)
    Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
    Purchase_Record.fieldFixedType: char
    Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
    Purchase_Record.fileContentFormatting: trim
    Adapter Status: Active
    Advanced Mode: (not checked)
    Your help is much appreciated.

    Hi Alaa,
    look into this document:
    http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
    If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
    Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
    Regards
    Stefan

  • Satellite not showing wireless networks, adapter seems ok

    my satellite is not showing wireless networks and i can't figure out what networks are available. the adapter seems to be working properly according to windows device manager. i had to uninstall configfree, although i'm not sure that caused any problem. i have had to run a bunch of anti-spyware programs, registry cleaners etc., system seems much better but a few glitches.

    It's possible, but it might be a lot more work to do so.  It all depends on how soon you need to get it fixed.  I'm not a network specialist so I can't really offer much in the way of assistance other than what I already did.  It's possible someone else might have other ideas, but since you didn't post this in the Networking and WiFi Forum where it belongs it's quite possible that those networking specialists will never even see your post to respond to it.  I know that I rarely go into the Networking Forum as it isn't my strong suit. 
    If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

  • NVIDIA card not showing up, VGA adapter reports problem

    Hi all,
    I am running a W520 which has a NVIDIA Quadro 1000M, but I have an issue with installing the NVIDIA properly.
    In device manager, only the Intel HD Graphics family and Standard VGA Graphics adapter show up. The VGA Graphics adapter reports a "problem (10)".
    Link to picture
    When I try to install the latest driver from NVIDIA, I get an error message, stating: "You must install an Intel driver first."
    Link to picture
    The NVIDIA control panel states:
    Does anyone have the same issue? In general, my computer runs fine. I would like to use the NVIDIA only for the CUDA cores, not to hook up another display.
    I hope this will work finally without opening a can of worms.
    Thanks!
    Frank
    Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

    Hi, Frank
    Under the properties of the device as shown in your first picture, have you tried updating the driver by looking under the Driver tab? If so, try updating the driver and see if that helps.
    I also found this document from Microsoft that may assist you in solving this error.
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Decentral Adapter not showing up in RWB

    I have just installed a J2ee Decentral Adapter instance, configured the exchange profile to connect back to the main PI instance and connected it to the SLD (both the J2ee Decentral Adapter and main PI instance use the same SLD).
      One of the last steps is to check see if the Decentral Adapter shows up in the PI Instances Runtime Work Bench (RWB), but it does not.
      I've noticed that on the SLD, the J2ee Decentral Adapter shows up as a Technical System, but when going to the SLD > Administration > Content Maintenance > All Instances > Class: XI Adapter Framework, that only my main PI instances show up, not the recently installed J2ee Decentral Adapter.
      Anybody have any ideas of what else to check ?
    Thanks..SB

    Aaron,
    1.1 SAP XI AF CPA Cache are set at the defaults of the install.  The SLDAccess is set to true which according to the following SAP Help doc says that the entris are ignored: http://help.sap.com/saphelp_nw04s/helpdata/en/29/22ee41c334c717e10000000a155106/frameset.htm
    1.2 SLD DATA Supplier is set correctly.  I can do a CIM Test and trigger the data upload successfully.   Still no entry under the Content Maintenance though.
    2. SXI_CACHE > Adapter Engine still does not show the Decentral Adapter.  I've even bounced both systems and the SLD.
    per Chirag I've also double checked blog "Basic Steps In Decentralized Adapter Engine
    This Decentral adapter is in DMZ #1, so I must use the IP of my SLD for the SLD access and my Main PI is in DMZ #2.  I've checked to make sure ports 50000 and 3300 from Decentral to my PI system work - are there any other ports ? 
    Thanks...Scott B.

  • Broadcom wifi chipset not showing adapter

    I have a BCM4313 which is using the brcmsmac module, but iwconfig, ip addr, and 'ls /sys/class/net/' do not show my wifi adapter.
    For the record, in any other distro that has more automation my wifi card works right out of the box.
    I was able to setup a wifi connection in the network-manager, but I can't use it.
    [root@moniker ~]# ls /sys/class/net/
    eth0  lo
    I tried to rmmod and modprobe the module as some articles suggested, but that didn't do anything either.
    Any help would be appreciated.

    Gusar wrote:Did you blacklist the bcma module? The wiki says "The bcma module can prevent some cards from showing up and may need to be blacklisted" but there is no "can" and "may", bcma and brcmsmac are for sure in conflict, so you need to blacklist bcma.
    Yeah, I guess a reboot is all I needed after doing all that. Thanks.

  • Compaq 15 wifi icon not showing in windows 7

    Hello I have a PC Notebook Compaq 15 h000ss, I have just installed Windows 7 64 bits and the wifi icon is not showing, the wifi adapter is not showing either in device manager, and the light on the f12 wifi key is always on. Please, any idea on how can I get my wifi adapter working? (it was working before in Windows 8.1) Thank you 

    Hi: Please do the following and I will post the link to the wireless card driver you need... Go to the Device Manager and click on the Network Controller device.  At the top of the Network Controller window, click on the Details tab. Now you see a Property drop down list that is defaulted to Device Description. Drop down on that and select the second item (Hardware ID's). Now you see 3-4 lines of characters, the top line starting with PCI\VEN. Post that top line of characters.

  • DVI to Viedo adapter stoped working after upgrade to Mountain lion does not show up in displys any more

    I have a dvi to viedo adaptor that no longer shows up in the displays window, and on image shows up on the tv. How do I get the mac book to reconize the adaptor? The Mv book does respond to the adaptor beging pluged in but does not show up in the display window.
    Mike

    Hi there, You just need to update the drivers of your laptop's built-in wireless adapter..
    I assume you have got Athros AR5007 wireless adapter  
    Kashif Khan

  • Adapter Framework not showing in the SLD or RWB

    Hi,
    I am on XI3.0, This is referring the the central J2EE adapter.
    The adapter framework/engine is not showing up as a component in the runtime workbench or under the technical systems of type XI in the SLD. All other XI components are showing up in both places. What could be causing this? When I go the the adapterframework monitor itself, the adapters show as active.
    Regards,
    Mrudula

    I am not sure, but, can you check whether the exchange profile and the SLD Data Supplier service is configured properly on the central J2EE Engine where the Adapter Framework is running.
    Warm regards,
    Venki.

  • Xpower ac adapter not showing in device manager

    Help!!
    this is my third board and have just reassembled this board yet again trying to get the Bluetooth/wifi adapter to work yet again.
    The adapter is not showing in board explorer or device manager. I have reseated this numerous times and have tried a different adapter with zero luck. I sthere a bios setting to enable this? I am currently using bios 1.5.
    Any help would be greatly appreciated 

    BIOS->Advanced- see if there is tab like Intel Ethernet ........... Go into it if it is there, and see if it shows if adapter is connected or not (Not link connection as this will bne disabled)
    Take adapter out and see if it has bent pins, as this might bre causing the issue. If all fine, get it bnack into the slot for it and take motherboard out of the case and test on non conductive material (motherboard box is ok, NOT Anti conductive bag).  Also >>Posting Guide<<, and you could also try second BIOS (little switch, flip it when PC is OFF)

  • File Adapter not showing in Adapter Monitoring

    I have created a basic scenario and when I go to check the file adapters they are not showing...  Why is this what should I do

    Hi Ricardo,
    Please check the adapters in RWB...Is the File adapter is avialble or not?
    If you can able to see then it should get appear in the Adapter list otherwise please deploye the the adapters once again.
    Please let me know if you have any queries.
    Regards,
    chandu.

  • Why my Local Adapter Engine not showed in SLD and Integration Directory?

    Hi guru,
    I have installed one Local Adatper Engine on Host B, then an XI is installed on Host A, but After I installed the local adapter engine and follow the standard configration step mentioned in this document:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/307deae3-604e-2a10-feae-f016fb9cadd4.
    After the configuration is done, I restart the local adatper engine, but this local adapter engine is not showed in integration directory.
    what is the problem?

    The post-installation configuration steps are not complex, I exactly followed.
    what other reason could it be? have any guru configured local adapter engine before?

  • Adapter Engine Not Showing up in SXI_CACHE

    Hi,
    The adapter Engine is not showing up in the Transaction SXI_CACHE and also when i create a RFC comm channel it is not showing up in the Adapter Engine Dropdown.Can anyone let me know whether these both are linked and is there any way to rectify the same ?
    Regards,
    Kittu.

    Hi Kittu,
    try restarting the J2EE Engine. This should register the AE with the SLD.
    If that does not work then check there are not SLD inconsistencies,
    i.e.,
    <b>#764176</b>  Error in XI due to inconsistent SLD contents
    If that does not help try calling the <b>FM - SAI_AE_DETAILS_GET</b>
    <i>e.g.</i>
    TCODE
      <b>SE37</b>
    SAI_AE_DETAILS_GET
    <b> Import parameters                  Value</b>
    AE_NAME                             AF.<SID>.<IS Hostname>
    BYPASSING_CACHE              X
    The result should be something like
    <b>Export parameters               Value</b>
    AE_MSG_URL                      http://<IS Hostname>:<J2EE port>/MessagingSystem/receive/AFW/XI
    IS_SERVICE_USER_NAME            XIISUSER
    IS_SERVICE_USER_PASSWORD       
    WAS_CACHED
    and the <b>AE</b> should be listed in
    TCODE
       <b>SXI_CACHE
        -> GoTo AE Cache</b>

  • Adaptation Mode HTML5 - deleted fields not show up anymore -Please Help

    Hi SAP,
    Hi was doing screen arrangements though the adaptation mode, and by mistake I dragged the label Purpose to an area out of the Expense Report screen area. the label and the field do not show up any more in the Expense Report from a non-Travel Related expenses and there is no way to add this field again, it doesn't show up either under the fields available to add.
    since it is a required field i can't create the documents any more.

    Hi,
    there is a function "discard screen" also on the same menu.
    Best regards,
    Sigi

  • Database Adapter Wizard does not show accessible table

    HI guys,
    in the wizard I am unable to see the tables which I need to use for database adapter.
    But I do have access to those tables, and able to select from them in SQL worksheet from with in Jdev.
    I dont own the tables, but my user id have readable access to those tables.
    Any help is appreciated.
    P.S. If I didnt explain it properly, plz let me know. It really creates lot of access issues if I can only create DB adapter on My owned tables.
    :)

    Hi there,
    please see the answer to your duplicate post on the BPEL forum:
    DB Adapter does not show selectable tables
    In general BPEL forum gets a lot more traffic but I will try to address questions on both equally.
    Thanks
    Steve

Maybe you are looking for