/usr/openwin/lib/libp missing

Hi -
Used to compile a program which uses /usr/openwin//lib/libp/xxxx.a successfully under Solaris 8 with Forte Dev 6. Now when I tried the same under Solaris with Sun Studio 10, error is generated as there is no libp directory. I checked and there is /usr/openwin/lib but no libp. Has this something got to do with Solaris 10 per se or is it part of Sun Studio 10 installation which has changed. Your help will be greatly appreciated.
Regards

Hi
Thanks a ton for your mail. Yes remembered about the static libraries and checked. There is no libp directory, but all the libraries under openwin/lib/libp are now in openwin/lib.
thanks once again for the pointer

Similar Messages

/usr/openwin/lib/libdga.so.1 been deleted by mistake, where to find one?

I accidently deleted the /usr/openwin/lib/libdga.so.1 (sorlaris 10 10/08, sparc), how can I get another one?
is it on the solaris 10 DVDs? or anyboday email me one ([email protected])?
thanks in advance.
y.zhang

y.zhang wrote:
I accidently deleted the /usr/openwin/lib/libdga.so.1 (sorlaris 10 10/08, sparc), how can I get another one?
is it on the solaris 10 DVDs? $ pkgchk -l -p /usr/openwin/lib/libdga.so.1
Pathname: /usr/openwin/lib/libdga.so.1
Type: regular file
Expected mode: 0755
Expected owner: root
Expected group: bin
Expected file size (bytes): 94996
Expected sum(1) of contents: 41876
Expected last modification: Jan 23 04:05:43 2005
Referenced by the following packages:
SUNWxwplt
Current status: installed
So look on the DVD for this package. A brute force fix would be to pkgrm the package [from a console. not an X11 session!] and then to pgdadd it from the DVD.
Paul

Solaris 10 GA/SunBlade 100 - /usr/openwin missing a lot of files.

Solaris 10 GA (CD-Media)
SunBlade 100, 500mhz, 768meg memory (problem)
SunBlade 100, 500mhz, 1024meg memory (problem)
SunBlade 150, 650mhz, 2048meg memory(success)
Complete install from CD Media on all 3 machines (default, Entire Group.) On the 100's, after final reboot, X-Server would not start on console. /var/dt/Xerrors showed "not found" libraries (libfont.so.1, libtypesclr.so.1) and Xsun would die. On the 150, no problems.
I compared (by size) /usr/openwin on the 100's and the 150 and revealed the 100's directory pretty much empty. (Sizes at end.)
I copied over /usr/openwin from the 150 to the 100, rebooted and JDS and CDE are working fine.
Happy to assist with any further testing! If my PSP order was here I'd file a bug report. :)
Doug
Size comparison -
/usr/openwin is the directory copied from the SunBlade 150.
/usr/ORIGINAL_openwin is the directory installed on both SunBlade 100's
root@dougsolx /> du -s /usr/openwin/*
29096 /usr/openwin/bin
2158 /usr/openwin/demo
1852 /usr/openwin/etc
13974 /usr/openwin/include
995378 /usr/openwin/lib
31354 /usr/openwin/man
4257108 /usr/openwin/platform
51674 /usr/openwin/server
1192 /usr/openwin/sfw
67404 /usr/openwin/share
root@dougsolx /> du -s /usr/ORIGINAL_openwin/*
24510 /usr/ORIGINAL_openwin/bin
2158 /usr/ORIGINAL_openwin/demo
2 /usr/ORIGINAL_openwin/etc
2 /usr/ORIGINAL_openwin/include
534564 /usr/ORIGINAL_openwin/lib
2 /usr/ORIGINAL_openwin/man
137388 /usr/ORIGINAL_openwin/platform
40268 /usr/ORIGINAL_openwin/server
406 /usr/ORIGINAL_openwin/sfw
52868 /usr/ORIGINAL_openwin/share
root@dougsolx />
.

Thanks pterobyte!
Jan 21 13:52:46 clientdomain postfix/qmgr[58]: C8A7A13DC504: from=<[email protected]>, size=51528, nrcpt=1 (queue active)
Jan 21 13:52:46 clientdomain postfix/pipe[416]: C8A7A13DC504: to=<[email protected]>, relay=cyrus, delay=22, status=sent (mail.clientdomain.com)
Jan 21 13:52:46 clientdomain postfix/qmgr[58]: C8A7A13DC504: removed
Jan 21 13:52:50 clientdomain postfix/smtpd[420]: NOQUEUE: reject: RCPT from 64-95-124-91.pool.ukrtel.net[91.124.95.64]: 554 Service unavailable; Client host [91.124.95.64] blocked using zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=91.124.95.64; \
To me, it seems the last entry is not related and then the entries after didn't seem related either. Does the "C8A7A13DC504" identify the specific email (like an ID number or something).
Does the log entry tell you anything?
Message was edited by: MacWorks

/usr/openwin/bin/xmkmf: imake: not found

I'm trying to install TightVNC on Solaris 10 (sparc) and have ran into several issues. This was a fresh Solaris install, therefore I recently installed make, gzip, and gcc from the sunfreeware site.
# xmkmf
mv -f Makefile Makefile.bak
imake -DUseInstalled -I/usr/openwin/lib/X11/config
/usr/openwin/bin/xmkmf: imake: not found
PATH env:
# echo $path
.:/usr/sbin:/usr/bin:/usr/local/bin
I installed make in the /usr/local/bin folder.
I'm not exactly sure what imake is so I'm fairly stuck at this point.

I think I have an environment variable issue. Here is copy of the output of #env:
OPENWINHOME=/usr/openwin
PATH=/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/ucb/:/usr/css/bin:/usr/sfw/bin
PS1=#
and here is an echo:
# echo $path
.:/usr/sbin:/usr/bin:/usr/local/bin
I may be adding the variable wrong because I'm getting a "make not found" error now. Do you have a good link on adding / appending onto environment variables?
Thanks

Solaris10 missing /usr/openwin directories in non-global container

I created a global (default) and two non-global containers. The /usr/openwin directories in non-global containers are empty (while global one's are fine). Since /usr is read only in non-global containers, I can't add anything to it.
questions:
1. why is the /usr/openwin directories is empty in non-global containers, did I miss some steps in creating containers?
2. How do I make /usr/openwin visible now to the non-global containers?
appreciate your help.

What you observed is normal. The basic Solaris 11 zone install gives you a somewhat minimal install. If you want additional packages, you can install them. If you want the zone install to have what you would install from a CD I suppose you could do a the following:
pkg install slim_install
pkg uninstall slim_install
My understanding is that the slim_install package contains dependencies which loads all of the desktop software but doesn't contain any content itself - which is why you can (and should) remove it afterwards.
That said, normally one uses a zone for a particular purpose. A better approach might be to install only the software in the zone which is needed for that purpose. That would save space, limit security exposure and reduce maintenance overhead. If your purpose is to have a full user environment, that may be to include all the slim_install packages and maybe others as well.
I would recommend that you not install services by copying files. If you need a service find out what package contains that service and install the package in the zone. That way you won't break maintenance via pkg update.
So - your questions:
1. A Solaris 11 zone install is minimal, presumably to make it easy to set up simple single function zones. Additional packages can be added as needed using "pkg install" as needed to provide any necessary services.
2. Solaris 10 zones work differently and import most packages from the global zone. With Solaris 10 sparse zones, you actually use the same files from the global zone. Solaris 11 zones are different in that they are actually a separate install. The basic install is minimal, presumably to allow for small and simple single function zones. You are not doing anything wrong with respect to the basic install, this is just how things work.

Missing DIR /usr/X11R6/lib

Dear,
After installed OUL5-x64 and comparing with other server that was running ebs R12. My server was missing the DIR /usr/X11R16/lib and a library /usr/lib/libdb.so.2
Pleas advise which pakage that i need to install to get the two missing.
Thanks in advance.

The libraries which used to be in /usr/X11R6/lib are now found in /usr/lib and/or /usr/lib64.
The oracle documentation describes how to get past the libdb.so.2 problem:
3.4 Oracle HTTP Server on Oracle Enterprise Linux 5.0 and Red Hat Enterprise Linux 5.0
If you intend to use Oracle HTTP server, which is included in Companion CD of Oracle Database 10g Release 2 (10.2) Media pack, refer to the MetaLink note 317085.1 for more information on using Oracle HTTP server on Oracle Enterprise Linux 5.0 and Red Hat Enterprise Linux 5.0.
Legacy entry points required by this version of Apache (libdb.so.2) are moved to gdbm-1.8.0-26.2.1.i386. You must create a symlink using the following command:
$ ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2

Can I copy fonts from /usr/X11/lib/X11/fonts to /Library/Fonts ?

Hi,
Short Version
The short version of my question is in the subject (specifically, I'm referring to files of type afm, pfb, pfa and maybe some other sort of pf? located in /usr/X11/lib/X11/fonts/Type1/)
Long Version
Here's the long version, along with an explanation of why I'm interested. Please keep in mind that the only thing I know about fonts is what is contained in the xfig documentation.
I'm using LaTeX Equation Editor. (It, in turn, is using the TeXlive 2007 distribution of (La)TeX. Yes that replaced some "system files" like /usr/bin/pstopdf, but I recovered them from another Leopard Mac.) However, the equations which LaTeX Equation Editor is rendering just look wrong; for example, the equation $a=b$ renders in a boxy upright font, whereas the symbols are supposed to be italicized (math mode). Some symbols (for example $\epsilon$ a.k.a. ε) just don't appear. However, I found that the directory /tmp/random string of hyphenated numbers/ contained equation.tex, equation.eps and equation.pdf (among other files). Examining equation.eps using gv renders the equation correctly. However, viewing equation.pdf in Preview reproduces the faulty rendering. The faulty pdf is reproduced by regenerating equation.pdf using epstopdf (as supplied by TeXLive). Using (Apple's) pstopdf instead results in a slightly better result, but symbols like ε are still missing.
Just using the eps file is not useful (in addition to being kludgy) because the problem is also reproduced if I import the eps file into Keynote. Using Grab to take a screen shot of gv's successful rendering eliminates the transparent background, which results in an ugly import into Keynote.
Incidentally, I did not have this problem when using Tiger.
I'm assuming, particularly since gv didn't even work properly until I had installed fonts following the xfig documentation, that this is a font issue, and that, in particular, my X11 fonts are not transferring to Aqua. Is there a way of transferring the X11 fonts I installed for gv etc. to Aqua and if so how? Do I have to worry that font files in Aqua appear to be named after the name of the fonts, whereas under X11, the map from font name to font file appears to be the purpose of the extra file /usr/X11/lib/X11/fonts/fonts.dir?
Thanks!

You must in fact add your custom fonts, as the default font set will be the same on all macs running Lion.
You do not offer details, but I may confess what I do in order to have the same font set on all macs at home, just in case someone needs to work on another computer. Usually, they are linguistic fonts.
- I do not install additional fonts, bar the first time when I install a new Mac OS
- save all fonts stored in System/Library/Fonts and /Library/Fonts unto an xternal drive, just in case something wrong happems
- I have a folder with my custom fonts, which are added to all macs around
I do not know what you want to do, but I offered a hint.

/usr/cluster/lib/amd64/libdsdev.so.1: symbol free_rpc_args: referenced symb

We are running SC 3.2 on AMD 64 We keep getting this relocation error: file /usr/cluster/lib/amd64/libdsdev.so.1: symbol free_rpc_args: referenced symbol not found are we missing any patch.
Thanks a lot
bash-3.00# scswitch -e -j ms-server
ld.so.1: ims_svc_start: fatal: relocation error: file /usr/cluster/lib/amd64/libdsdev.so.1: symbol free_rpc_args: referenced symbol not found
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: Method <ims_svc_start> on resource <ms-server> terminated due to receipt of signal <9>
Connecting to watcher ...
Warning: Cannot connect to the watcher process
job_controller server is not running
dispatcher server is not running
sched server is not running
http server is not running
pop server is not running
imap server is not running
purge server is not running
store server is not running
ld.so.1: ims_svc_stop: fatal: relocation error: file /usr/cluster/lib/amd64/libdsdev.so.1: symbol free_rpc_args: referenced symbol not found
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: Method <ims_svc_stop> on resource <ms-server> terminated due to receipt of signal <9>
Jan 2 07:46:09 pgimpy2 ip: TCP_IOC_ABORT_CONN: local = 010.011.161.138:0, remote = 000.000.000.000:0, start = -2, end = 6
Jan 2 07:46:09 pgimpy2 ip: TCP_IOC_ABORT_CONN: aborted 0 connection
scswitch: (C969069) Request failed because resource group MS_RG_zones is in ERROR_STOP_FAILED state and requires operator attention
------------ snip --------------
10) Messages from '/var/adm/messages'
------------ snip --------------
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <ims_svc_start> for resource <ms-server>, resource group <MS_RG_zones>, node <pgimpy2>, timeout <300> seconds
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/sun/comms/msg_scha/bin/ims_svc_start>:tag=<MS_RG_zones.ms-server.0>: Calling security_clnt_connect(..., host=<pgimpy2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 650825 daemon.error] Method <ims_svc_start> on resource <ms-server> terminated due to receipt of signal <9>
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <ms-zones-gimpy-161-4a>, resource group <MS_RG_zones>, node <pgimpy2>, timeout <300> seconds
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <ms-zones-hasp>, resource group <MS_RG_zones>, node <pgimpy2>, timeout <90> seconds
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <ims_svc_stop> for resource <ms-server>, resource group <MS_RG_zones>, node <pgimpy2>, timeout <300> seconds
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_monitor_stop>:tag=<MS_RG_zones.ms-zones-gimpy-161-4a.8>: Calling security_clnt_connect(..., host=<pgimpy2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/sun/comms/msg_scha/bin/ims_svc_stop>:tag=<MS_RG_zones.ms-server.1>: Calling security_clnt_connect(..., host=<pgimpy2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hastorageplus/hastorageplus_monitor_stop>:tag=<MS_RG_zones.ms-zones-hasp.8>: Calling security_clnt_connect(..., host=<pgimpy2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_stop> completed successfully for resource <ms-zones-hasp>, resource group <MS_RG_zones>, node <pgimpy2>, time used: 0% of timeout <90 seconds>
Jan 2 07:46:08 pgimpy2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for resource <ms-zones-gimpy-161-4a>, resource group <MS_RG_zones>, node <pgimpy2>, time used: 0% of timeout <300 seconds>
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 650825 daemon.error] Method <ims_svc_stop> on resource <ms-server> terminated due to receipt of signal <9>
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_stop> for resource <ms-zones-hasp>, resource group <MS_RG_zones>, node <pgimpy2>, timeout <1800> seconds
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hastorageplus/hastorageplus_stop>:tag=<MS_RG_zones.ms-zones-hasp.1>: Calling security_clnt_connect(..., host=<pgimpy2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_stop> completed successfully for resource <ms-zones-hasp>, resource group <MS_RG_zones>, node <pgimpy2>, time used: 0% of timeout <1800 seconds>
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ms-zones-gimpy-161-4a>, resource group <MS_RG_zones>, node <pgimpy2>, timeout <300> seconds
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_stop>:tag=<MS_RG_zones.ms-zones-gimpy-161-4a.1>: Calling security_clnt_connect(..., host=<pgimpy2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Jan 2 07:46:09 pgimpy2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 010.011.161.138:0, remote = 000.000.000.000:0, start = -2, end = 6
Jan 2 07:46:09 pgimpy2 in.routed[203]: [ID 970160 daemon.notice] unable to get interface flags for bge0:1: No such device or address
Jan 2 07:46:09 pgimpy2 in.routed[203]: [ID 472501 daemon.notice] bge0:1 has no ifIndex: No such device or address
Jan 2 07:46:09 pgimpy2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ms-zones-gimpy-161-4a>, resource group <MS_RG_zones>, node <pgimpy2>, time used: 0% of timeout <300 seconds>
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <ms-zones-hasp>, resource group <MS_RG_zones>, node <pgimpy2>, timeout <1800> seconds
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hastorageplus/hastorageplus_postnet_stop>:tag=<MS_RG_zones.ms-zones-hasp.11>: Calling security_clnt_connect(..., host=<pgimpy2>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Jan 2 07:46:09 pgimpy2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <ms-zones-hasp>, resource group <MS_RG_zones>, node <pgimpy2>, time used: 0% of timeout <1800 seconds>
bash-3.00#

FYI:
This turns out to be caused by a Sun Studio Solaris linker bug which has now been fixed. Unfortunately the problem exists with the compiled agent. The recommended fix will be to use the version of the agent that comes out with the next release of the Solaris Cluster software as this will probably appear sooner than a patch would.
Regards,
Tim
---

/usr/bin/install is missing!

Well, I don't know how this one happened. I was trying to "make install" a program I had just finished compiling, and then I get a message saying that /usr/bin/install is missing. I checked /usr/bin for "install", and it isn't there, even though it was before. How do I fix this problem?
Last edited by Falcata (2008-01-25 22:02:46)

Problem solved. I made a link to /bin/install under /usr/bin, and it worked fine.
Now then, another question: why did Nodoka get installed under /usr/local/lib, rather than /usr/lib?
EDIT: Should have waited a moment before posting, I guess. How do you install packages from AUR? Or packages that you downloaded onto your system?
Last edited by Falcata (2008-01-25 23:41:26)

Cannot open registry key and /usr/bin/lib: invalid option --N patch 7237313

Hi,
I am trying to install autoconfig TXK patch 7237313 for cloning an EBS 12 on windows server 2003.
When I run adpatch it returns 2 errors:
*1 -*
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
*2 -*
Relinking module 'CONCSUB.exe' in product fnd ...
gnumake -f E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk E:/o
racle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe
Starting link of fnd executable 'CONCSUB.exe' on Fri Feb 5 09:25:07 SAST 2010
/usr/bin/lib: invalid option -- N
Try `/usr/bin/lib --help' for more information.
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:2901: warning:
overriding commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/
CMDCART.dll'
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:752: warning: i
gnoring old commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin
/CMDCART.dll'
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:2948: warning:
overriding commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/
FNDRTR45.exe'
E:/oracle/PROD/apps/apps_st/appl/admin/PROD/out/link_fnd_2548.mk:1333: warning:
ignoring old commands for target `E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bi
n/FNDRTR45.exe'
link.exe -MAP:E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.map -NODEF
AULTLIB -NOLOGO -SUBSYSTEM:CONSOLE -ENTRY:mainCRTStartup -OUT:E:/oracle/PROD/app
s/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe E:/oracle/PROD/apps/apps_st/appl/fnd/1
2.0.0/lib/fdpocr.obj \
E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/lib/FNDCORE.lib E:/oracle/PR
OD/apps/tech_st/10.1.2/precomp/lib/msvc/orasql10.lib E:/oracle/PROD/apps/tech_st
/10.1.2/precomp/lib/msvc/orasqx10.lib E:/oracle/PROD/apps/tech_st/10.1.2/RDBMS/l
ib/oraclient10.lib E:/oracle/PROD/apps/tech_st/10.1.2/RDBMS/lib/oracommon10.lib
E:/oracle/PROD/apps/tech_st/10.1.2/NETWORK/lib/oranro10.lib E:/oracle/PROD/apps/
tech_st/10.1.2/NETWORK/lib/oran10.lib E:/oracle/PROD/apps/tech_st/10.1.2/NETWORK
/lib/oranl10.lib E:/oracle/PROD/apps/tech_st/10.1.2/lib/oranls10.lib E:/oracle/P
ROD/apps/tech_st/10.1.2/lib/oracore10.lib /LIB/MSVCRT.LIB /LIB/OLDNAMES.LIB /P
latformSDK/LIB/KERNEL32.LIB /PlatformSDK/LIB/USER32.LIB /PlatformSDK/LIB/ADVAPI3
2.LIB /PlatformSDK/LIB/WINSPOOL.LIB /PlatformSDK/LIB/COMDLG32.LIB /PlatformSDK/L
IB/GDI32.LIB /PlatformSDK/LIB/VERSION.LIB
link: invalid option -- M
Try `link --help' for more information.
gnumake: *** [E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin/CONCSUB.exe] Error
1
Done with link of fnd executable 'CONCSUB.exe' on Fri Feb 5 09:25:08 SAST 2010
Relink of module "CONCSUB.exe" failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory E:/oracle/PROD/apps/apps_st/appl/fnd/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
egrep version is 2.5.1 and gnumake is 3.80.
please help,
regards,
Hassane Cabir

Hi,
Are the application services down?
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLEyes, the services are down, using adstpall.cmd and Maintenance mode enabled using adadmin.
Get the version 3.80-1 of the make file -- See (Note: 414992.1 - Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows).The make is already 3.80-1.
regards,
Hassane Cabir

Ld.so.1: sudo: fatal: /usr/local/lib/libintl.so.8: wrong ELF data format

I have installed sudo version 1.6.9p5.
after the configuration, when i'm trying to sudo, i get the below error:
ld.so.1: sudo: fatal: /usr/local/lib/libintl.so.8: wrong ELF data format: ELFDATA2LSB
================================
background of the server is as :
# uname -a
SunOS buildman 5.10 Generic_147440-01 sun4u sparc SUNW,Sun-Fire-V440
# ldd /usr/local/bin/sudo
libpam.so.1 => /usr/lib/libpam.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libintl.so.8 => /usr/local/lib/libintl.so.8 - wrong ELF data format: ELFDATA2LSB
libsocket.so.1 => /usr/lib/libsocket.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libc.so.1 => /usr/lib/libc.so.1
libcmd.so.1 => /lib/libcmd.so.1
libmp.so.2 => /lib/libmp.so.2
libmd.so.1 => /lib/libmd.so.1
libscf.so.1 => /lib/libscf.so.1
libdoor.so.1 => /lib/libdoor.so.1
libuutil.so.1 => /lib/libuutil.so.1
libgen.so.1 => /lib/libgen.so.1
libm.so.2 => /lib/libm.so.2
/platform/SUNW,Sun-Fire-V440/lib/libc_psr.so.1
/platform/SUNW,Sun-Fire-V440/lib/libmd_psr.so.1
Please help.

installed the libintl for sparc mc and it worked fine.. thanks for the help..

[svn:cairngorm3:] 16142: Insync Refactorings, Module lib: Added missing parameters from IModuleInfo interface.

Revision: 16142
Revision: 16142
Author:   [email protected]
Date:     2010-05-16 14:21:40 -0700 (Sun, 16 May 2010)
Log Message:
Insync Refactorings, Module lib: Added missing parameters from IModuleInfo interface. Maven: Take Persistence out.
Modified Paths:
    cairngorm3/trunk/libraries/Module/src/com/adobe/cairngorm/module/ModuleInfo.as
    cairngorm3/trunk/libraries/ModuleTest/.actionScriptProperties
    cairngorm3/trunk/libraries/lib-parent/pom.xml
    cairngorm3/trunk/samples/insync/insync-basic/src/InsyncContext.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/application/RefreshSearchAfterSav eController.as
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ContactList.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ContactsNavigator.mx ml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/PictureInput.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/Toolbar.mxml
    cairngorm3/trunk/samples/insync/insync-basic/src/insync/presentation/ToolbarPM.as
    cairngorm3/trunk/samples/insync/insync-basic/test/insync/application/RefreshSearchAfterSa veControllerTest.as
    cairngorm3/trunk/samples/insync/insync-basic/test/insync/presentation/ToolbarPMTest.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/.actionScriptProperties
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/src/insync/contacts/appli cation/RefreshSearchAfterSaveController.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/src/insync/contacts/prese ntation/ContactFormPM.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/src/insync/contacts/prese ntation/PictureInput.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-contacts/test/insync/contacts/appl ication/RefreshSearchAfterSaveControllerTest.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/.actionScriptProperties
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/src/ExpensesModule.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/src/ExpensesModuleRig.mxm l
    cairngorm3/trunk/samples/insync/insync-modularExtended-expenses/src/ExpensesRigContext.mx ml
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/.actionScriptProperties
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/src/ComposeMessageModule .mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/src/ComposeMessageModule Rig.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-messaging/src/ComposeMessageModule RigContext.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/application/Compo seMessageController.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/presentation/Cont entViewStack.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/presentation/Tool bar.mxml
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/src/insync/presentation/Tool barPM.as
    cairngorm3/trunk/samples/insync/insync-modularExtended-shell/test/insync/presentation/Too lbarPMTest.as

Ld: cycle in dylib re-exports with /usr/X11/lib/libGL.dylib liker error

Hello,
I found out that some open source applications when tied to be installed from source or trough fink or mac ports simply fail at linking with the error:
ld: cycle in dylib re-exports with /usr/X11/lib/libGL.dylib
However, when I force the linker to use /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib instead it works.
I am wondering what is the problem since /usr/X11/lib/libGL.dylib has to be exported from /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib.
It is very painful to force configure to use right version of libGL.dylib. Since the two libraries are of
different size the should be different. Simple replacement of /usr/X11/lib/libGL.dylib by /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib would work, but what are the consequences for the other applications?
I would be very happy is someone from OS X developement would reply to this and address this problem in the future.
Regards,
Slobodan

Post to the Unix forum under OS X Technologies and you should get a knowledgeable answer.

/usr/local/lib/libgfortran.3.dylib: mach-o, but wrong architecture

Hello every one,
I am an absolutely new mac user. I need to run a couple of softwares for my research but I faced errors that I really can not understand. There is an Unix executable and a .f Fortran file in each folder that I use. As I run the executable the following error appears:
dyld: Library not loaded: /usr/local/lib/libgfortran.3.dylib
Referenced from: /Users/somaiehbeladi/Desktop/100601stereo/combine_segments/combinesegs
Reason: no suitable image found. Did find:
/usr/local/lib/libgfortran.3.dylib: mach-o, but wrong architecture
/usr/local/lib/libgfortran.3.dylib: mach-o, but wrong architecture
Trace/BPT trap
logout
However, the libgfortran.3.dylib is already in the mentioned directoty and I used the File command on it which gives
Somaieh-Beladis-MacBook:lib somaiehbeladi$ File libgfortran.3.dylib
libgfortran.3.dylib: Mach-O dynamically linked shared library ppc
Then I tried the otool -L command
Somaieh-Beladis-MacBook:combine_segments somaiehbeladi$ otool -L combine_segs
-bash: otool: command not found
So, could you please let me know how I should find out the proper architecture for my executable and then how to change the architecture.
Many thanks in advance.

It looks as though you are using an executable compiled for an Intel processor but have the PowerPC versions of the gfortran libraries installed.
How did you install this software?
Which version of OS X are you using?
Ar you using a PowerPC-based Mac, or an Intel-based Mac?

Problems with /usr/ccs/lib/cpp

HI,
I have problems with /usr/ccs/lib/cpp
I want get the pre-compiled program
I used a simple program
$ cat x.p
#include <stdio.h>
main()
printf ( "Process\n" );
When I used the command
$ /usr/ccs/lib/cpp x.p > y.c
The file y.c has 0 bytes.
Pls your help. I am using Sun forte 6 Update 2

You should also consider whether you should be using cpp at all.
/usr/ccs/bin/cpp is the old K&R prepocessor, not the standard C preprocessor that is part of the C compiler. To use the standard C preprocessor, run "cc" using the -P or -E option.
The -P option creates a .i file and includes only the prepocessed code.
The -E option writes to standard output, and include file and line directives showing the source of all included text.

/usr/openwin/lib/libp missing

Similar Messages

Maybe you are looking for