Usrp driver 1.3 do not support for Labview 2013 64 bit ??

Hello, dear all
Is anyone install the latest USRP driver 1.3 for LV 2013 64 bit ? I found there is no version for 64 bit LV 2013.

Currently the 1.3 driver supports only LabVIEW 2013 32 bit (even on 64 bit computers.)
The LabVIEW 2014 version will support 64 bit and will be available to download very soon.
Please check here within the next week or so: http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnav:drv/q/usrp/

Similar Messages

NI-DNET support for LabVIEW 2013

We are using currently NI-DNET 1.6.6 with LabVIEW 2011. I installed now also LabVIEW 2013 on my computer and tried to sync the set of drivers with my LabVIEW 2011 installation.
Well, it seems that NI-DNET doesn't support LabVIEW 2013, at least officially. The NI-DNET and LabVIEW Version Compatibility shows that NI-DNET 1.6.6 supports LabVIEW 2011 and NI-DNET 1.6.7 supports LabVIEW 2012.
The NI System Driver Set November 2013 list NI-DNET 1.6.7 as part of the driver set. When I try to install it, there is no LabVIEW 2013 support.
My question is actually, if there is a plan to include NI-DNET support for LabVIEW 2013 or later in the driver set?
I copied the vi.lib\DeviceNet and vi.lib\nidnet directories from LabVIEW 2011 to 2013 and I can load my programs without any problems. I still didn't build an executable and didn't run them on the test fixture, but the projects can be loaded in LabVIEW 2013 without any brocken VIs. Should I expect any problems running LabVIEW 2013 with the NI-DNET 1.6.6 or 1.6.7 driver?
Nick
Solved!
Go to Solution.

I would update our drivers right away, but unfortunately the NI-Industrial Communications for DeviceNet doesn't support the PCI-DNET cards. We have probably close to 30 of those in the test fixtures. So, we need to use the NI-DNET 1.6.x driver anyway.
It will be nice if the NI-DNET installer can copy the NI-DNET VIs and supporting files to any LabVIEW version, well maybe any 201x. I hope until 2020 we can replace the old cards :-)
Nick

Is smb 3.0 already supported for exchange 2013

Hello,
We are looking to deploy exchange 2013. We have a netapp storage and vmware environment.
I was wondering if smb 3.0 is already supported for exchange 2013. I read in a blog of 2012 that it wasn't supported at the time. We would like to use it instead of a iscsi lun.

Hi,
Based on my knowledge, it is still not supported for Exchange 2013 up to now.
Here is an article for your reference, please refer to the "Exchange storage requirements" section.
Exchange 2013 Virtualization
http://technet.microsoft.com/en-us/library/jj619301.aspx#BKMK_Prereq
Another related article for your reference.
Exchange 2013 Storage Configuration Options
http://technet.microsoft.com/en-us/library/ee832792(v=exchg.150).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product

I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!

We only support ESXi
Sent from Cisco Technical Support iPad App

DMA from host to FPGA target is not supported for this remote system.

I am trying tocommunicate with my FPGA (on the cRIO 9002) from the RTOS. I setup up anOpen the correct VI reference with no error but as soon I try to access thefifo I receive error -63001 and the attached message says:
Error -63001 occurredat Open FPGA VI Reference in target - multi rate - variables - fileIO_old.vi
Possible reason(s):
NI-RIO FPGACommunications Framework: (Hex 0xFFFF09E7) DMA from host to FPGA targetis not supported for this remote system. Use another method for I/O or changethe controller associated with the FPGA target.
What other I/O optionsdo I have to move data asynchronously from the RTOS to the FPGA. I triedcreating memory but it appears that I can not write to the memory from the RTOSside.
We also have a 9012sitting around will using this cRIO instead solve this problem.
I am very very greenwhen it comes to LabView so I apologize if this is an easy question.
Solved!
Go to Solution.

As stated in the NI-RIO driver readme,
DMA is not supported from the host to the FPGA on the cRIO-900x series.
The cRIO-901x controller supports DMA transfers from host to FPGA and
FPGA to host while the cRIO-900x series controllers only support FPGA
to host DMA transfers. Therefore, LabVIEW returns an error if you try
to transfer using DMA from the cRIO-900x controller.
The 9012 looks like the ideal solution, you are very lucky to be having extra hardware laying around
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Selective XML Index feature is not supported for the current database version , SQL Server Extended Events , Optimizing Reading from XML column datatype

Team , Thanks for looking into this ..
As a last resort on optimizing my stored procedure ( Below ) i wanted to create a Selective XML index ( Normal XML indexes doesn't seem to be improving performance as needed ) but i keep getting this error within my stored proc . Selective XML
Index feature is not supported for the current database version.. How ever
EXECUTE sys.sp_db_selective_xml_index; return 1 , stating Selective XML Indexes are enabled on my current database .
Is there ANY alternative way i can optimize below stored proc ?
Thanks in advance for your response(s) !
/****** Object: StoredProcedure [dbo].[MN_Process_DDLSchema_Changes] Script Date: 3/11/2015 3:10:42 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- EXEC [dbo].[MN_Process_DDLSchema_Changes]
ALTER PROCEDURE [dbo].[MN_Process_DDLSchema_Changes]
AS
BEGIN
SET NOCOUNT ON --Does'nt have impact ( May be this wont on SQL Server Extended events session's being created on Server(s) , DB's )
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
select getdate() as getdate_0
DECLARE @XML XML , @Prev_Insertion_time DATETIME
-- Staging Previous Load time for filtering purpose ( Performance optimize while on insert )
SET @Prev_Insertion_time = (SELECT MAX(EE_Time_Stamp) FROM dbo.MN_DDLSchema_Changes_log ) -- Perf Optimize
-- PRINT '1'
CREATE TABLE #Temp
EventName VARCHAR(100),
Time_Stamp_EE DATETIME,
ObjectName VARCHAR(100),
ObjectType VARCHAR(100),
DbName VARCHAR(100),
ddl_Phase VARCHAR(50),
ClientAppName VARCHAR(2000),
ClientHostName VARCHAR(100),
server_instance_name VARCHAR(100),
ServerPrincipalName VARCHAR(100),
nt_username varchar(100),
SqlText NVARCHAR(MAX)
CREATE TABLE #XML_Hold
ID INT NOT NULL IDENTITY(1,1) PRIMARY KEY , -- PK necessity for Indexing on XML Col
BufferXml XML
select getdate() as getdate_01
INSERT INTO #XML_Hold (BufferXml)
SELECT
CAST(target_data AS XML) AS BufferXml -- Buffer Storage from SQL Extended Event(s) , Looks like there is a limitation with xml size ?? Need to re-search .
FROM sys.dm_xe_session_targets xet
INNER JOIN sys.dm_xe_sessions xes
ON xes.address = xet.event_session_address
WHERE xes.name = 'Capture DDL Schema Changes' --Ryelugu : 03/05/2015 Session being created withing SQL Server Extended Events
--RETURN
--SELECT * FROM #XML_Hold
select getdate() as getdate_1
-- 03/10/2015 RYelugu : Error while creating XML Index : Selective XML Index feature is not supported for the current database version
CREATE SELECTIVE XML INDEX SXI_TimeStamp ON #XML_Hold(BufferXml)
FOR
PathTimeStamp ='/RingBufferTarget/event/timestamp' AS XQUERY 'node()'
--RETURN
--CREATE PRIMARY XML INDEX [IX_XML_Hold] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index
--SELECT GETDATE() AS GETDATE_2
-- RYelugu 03/10/2015 -Creating secondary XML index doesnt make significant improvement at Query Optimizer , Instead creation takes more time , Only primary should be good here
--CREATE XML INDEX [IX_XML_Hold_values] ON #XML_Hold(BufferXml) -- Ryelugu 03/09/2015 - Primary Index , --There should exists a Primary for a secondary creation
--USING XML INDEX [IX_XML_Hold]
---- FOR VALUE
-- --FOR PROPERTY
-- FOR PATH
--SELECT GETDATE() AS GETDATE_3
--PRINT '2'
-- RETURN
SELECT GETDATE() GETDATE_3
INSERT INTO #Temp
EventName ,
Time_Stamp_EE ,
ObjectName ,
ObjectType,
DbName ,
ddl_Phase ,
ClientAppName ,
ClientHostName,
server_instance_name,
nt_username,
ServerPrincipalName ,
SqlText
SELECT
p.q.value('@name[1]','varchar(100)') AS eventname,
p.q.value('@timestamp[1]','datetime') AS timestampvalue,
p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') AS objectname,
p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') AS ObjectType,
p.q.value('(./action[@name="database_name"]/value)[1]','varchar(100)') AS databasename,
p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') AS ddl_phase,
p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') AS clientappname,
p.q.value('(./action[@name="client_hostname"]/value)[1]','varchar(100)') AS clienthostname,
p.q.value('(./action[@name="server_instance_name"]/value)[1]','varchar(100)') AS server_instance_name,
p.q.value('(./action[@name="nt_username"]/value)[1]','varchar(100)') AS nt_username,
p.q.value('(./action[@name="server_principal_name"]/value)[1]','varchar(100)') AS serverprincipalname,
p.q.value('(./action[@name="sql_text"]/value)[1]','Nvarchar(max)') AS sqltext
FROM #XML_Hold
CROSS APPLY BufferXml.nodes('/RingBufferTarget/event')p(q)
WHERE -- Ryelugu 03/05/2015 - Perf Optimize - Filtering the Buffered XML so as not to lookup at previoulsy loaded records into stage table
p.q.value('@timestamp[1]','datetime') >= ISNULL(@Prev_Insertion_time ,p.q.value('@timestamp[1]','datetime'))
AND p.q.value('(./data[@name="ddl_phase"]/text)[1]','varchar(100)') ='Commit' --Ryelugu 03/06/2015 - Every Event records a begin version and a commit version into Buffer ( XML ) we need the committed version
AND p.q.value('(./data[@name="object_type"]/text)[1]','varchar(100)') <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND p.q.value('(./data[@name="object_name"]/value)[1]','varchar(100)') NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND p.q.value('(./action[@name="client_app_name"]/value)[1]','varchar(100)') <> 'Replication Monitor' --Ryelugu : 03/09/2015 We do not want any records being caprutred by Replication Monitor ??
SELECT GETDATE() GETDATE_4
-- SELECT * FROM #TEMP
-- SELECT COUNT(*) FROM #TEMP
-- SELECT GETDATE()
-- RETURN
-- PRINT '3'
--RETURN
INSERT INTO [dbo].[MN_DDLSchema_Changes_log]
[UserName]
,[DbName]
,[ObjectName]
,[client_app_name]
,[ClientHostName]
,[ServerName]
,[SQL_TEXT]
,[EE_Time_Stamp]
,[Event_Name]
SELECT
CASE WHEN T.nt_username IS NULL OR LEN(T.nt_username) = 0 THEN t.ServerPrincipalName
ELSE T.nt_username
END
,T.DbName
,T.objectname
,T.clientappname
,t.ClientHostName
,T.server_instance_name
,T.sqltext
,T.Time_Stamp_EE
,T.eventname
FROM
#TEMP T
/** -- RYelugu 03/06/2015 - Filters are now being applied directly while retrieving records from BUFFER or on XML
-- Ryelugu 03/15/2015 - More filters are likely to be added on further testing
WHERE ddl_Phase ='Commit'
AND ObjectType <> 'STATISTICS' --Ryelugu 03/06/2015 - May be SQL Server Internally Creates Statistics for #Temp tables , we do not want Creation of STATISTICS Statement to be logged
AND ObjectName NOT LIKE '%#%' -- Any stored proc which creates a temp table within it Extended Event does capture this creation statement SQL as well , we dont need it though
AND T.Time_Stamp_EE >= @Prev_Insertion_time --Ryelugu 03/05/2015 - Performance Optimize
AND NOT EXISTS ( SELECT 1 FROM [dbo].[MN_DDLSchema_Changes_log] MN
WHERE MN.[ServerName] = T.server_instance_name -- Ryelugu Server Name needes to be added on to to xml ( Events in session )
AND MN.[DbName] = T.DbName
AND MN.[Event_Name] = T.EventName
AND MN.[ObjectName]= T.ObjectName
AND MN.[EE_Time_Stamp] = T.Time_Stamp_EE
AND MN.[SQL_TEXT] =T.SqlText -- Ryelugu 03/05/2015 This is a comparision Metric as well , But needs to decide on
-- Peformance Factor here , Will take advise from Lance if comparision on varchar(max) is a vital idea
--SELECT GETDATE()
--PRINT '4'
--RETURN
SELECT
top 100
[EE_Time_Stamp]
,[ServerName]
,[DbName]
,[Event_Name]
,[ObjectName]
,[UserName]
,[SQL_TEXT]
,[client_app_name]
,[Created_Date]
,[ClientHostName]
FROM
[dbo].[MN_DDLSchema_Changes_log]
ORDER BY [EE_Time_Stamp] desc
-- select getdate()
-- ** DELETE EVENTS after logging into Physical table
-- NEED TO Identify if this @XML can be updated into physical system table such that previously loaded events are left untoched
-- SET @XML.modify('delete /event/class/.[@timestamp="2015-03-06T13:01:19.020Z"]')
-- SELECT @XML
SELECT GETDATE() GETDATE_5
END
GO
Rajkumar Yelugu

@@Version : ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2012 - 11.0.5058.0 (X64)
   May 14 2014 18:34:29
   Copyright (c) Microsoft Corporation
   Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
(1 row(s) affected)
Compatibility level is set to 110 .
One of the limitation states - XML columns with a depth of more than 128 nested nodes
How do i verify this ? Thanks .
Rajkumar Yelugu

The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU - SharePoint Foundation 2013

After sucessfulling installing the SharePoint Foundation 2013, when i try to access the Secure Stored Service Application i get the below error
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 Secure Store Service
Secure Store                  g0n6 High    The trial period for this product has expired or this feature is not supported in this SKU. b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       8nca Medium Application error when access /_admin/sssvc/ManageSSSvcApplication.aspx, Error=The
trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.   at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1
operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoi... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       8nca Medium ...nt.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs
e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.Office.Server.ProductExpiredException: The trial period for this product
has expired or Secure Store Shared Service is not supported for this SKU.    at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy
proxy, String& errorMessage)     at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()     at Microsoft.Office.SharePoint.ClientExtensions.SecureSto... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
Runtime                       tkau Unexpected ...reAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Office.Server.ProductExpiredException: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.Execute[T](String operationName, Boolean validateCanary, ExecuteDelegate`1 operation)     at Microsoft.Office.SecureStoreService.Server.SecureStoreServiceApplicationProxy.IsMasterSecretKeyPopulated()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.SSSAdminHelper.EnsurePrerequisite(SecureStoreServiceApplicationProxy proxy, String& errorMessage)     at Microsoft.Office.Sha... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    ...rePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.InitializeGridView()
at Microsoft.Office.SharePoint.ClientExtensions.SecureStoreAdministration.ManageSSSvcApplication.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.Htt... b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.84* w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       ajlz0 High    ...pApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) b3b6e19b-7de2-e016-ad32-0fc975829ef0
11/16/2012 18:13:02.86 w3wp.exe (0x1774)                       0x15E8 SharePoint Foundation
General                       aat87 Monitorable b3b6e19b-7de2-e016-ad32-0fc975829ef0
Is it a bug or any issue in configuration?
Raghavendra Shanbhag | Blog: http://moss-solutions.blogspot.com
Please click "Propose As Answer " if a post solves your problem or "Vote As Helpful" if a post has been useful to you.
Disclaimer: This posting is provided "AS IS" with no warranties.

Hello
something should be related wuith this service, take a llok at my visual studio output whne I try to deplay and autohosted sharepoint app: (anyone can help)
1>------ Build started: Project: MySharePointAppWeb, Configuration: Debug Any CPU ------
1> MySharePointAppWeb -> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\bin\MySharePointAppWeb.dll
2>------ Build started: Project: MySharePointApp, Configuration: Debug Any CPU ------
2>C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config(34,4): warning : No element in the source document matches '/configuration/connectionStrings'
2> Transformed Web.config using C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\Web.Debug.config into obj\Debug\TransformWebConfig\transformed\Web.config.
2> Auto ConnectionString Transformed obj\Debug\TransformWebConfig\transformed\Web.config into obj\Debug\CSAutoParameterize\transformed\Web.config.
2> Copying all files to temporary location below for package/publish:
2> obj\Debug\Package\PackageTmp.
2> Packaging into C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.zip.
2> Adding sitemanifest (sitemanifest).
2> Adding IIS Application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Creating application (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding virtual path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\en\Microsoft.IdentityModel.resources.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.IdentityModel.Extensions.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\Microsoft.SharePoint.Client.Runtime.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.dll).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\bin\MySharePointAppWeb.pdb).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\packages.config).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Pages\Default.aspx).
2> Adding directory (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\jquery-1.7.1.min.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Scripts\_references.js).
2> Adding file (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp\Web.config).
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding ACL's for path (C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointAppWeb\obj\Debug\Package\PackageTmp)
2> Adding declared parameter 'IIS Web Application Name'.
2> Package "MySharePointApp.Web.zip" is successfully created as single file at the following location:
2> file:///C:/_works/visual%20studio%202012/Projects/MySharePointApp/MySharePointApp/obj/WebDeploy
2> To get the instructions on how to deploy the web package please visit the following link:
2> http://go.microsoft.com/fwlink/?LinkId=124618
2> Sample script for deploying this package is generated at the following location:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.deploy.cmd
2> For this sample script, you can change the deploy parameters by changing the following file:
2> C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\obj\WebDeploy\MySharePointApp.Web.SetParameters.xml
2> Successfully created package at: C:\_works\visual studio 2012\Projects\MySharePointApp\MySharePointApp\bin\Debug\app.publish\1.0.0.0\MySharePointApp.app
3>------ Deploy started: Project: MySharePointApp, Configuration: Debug Any CPU ------
3>Active Deployment Configuration: Deploy App for SharePoint
3>Uninstall app for SharePoint:
3> Skipping the uninstall step because the app for SharePoint is not installed on the server.
3>Install app for SharePoint:
3> Uploading the app for SharePoint...
3> Creating a trusted root authority in SharePoint for IIS Express.
3> Installation is in progress (00:00:00)
3> Installation is in progress (00:00:01)
3> Installation is in progress (00:00:02)
3> Installation is in progress (00:00:03)
3> Installation is in progress (00:00:05)
3> Installation is in progress (00:00:06)
3> App failed to install, cleaning up...
3> App installation cleanup failed due to errors. Please see the app on the SharePoint site’s “Site Contents” page for details.
3> App installation encountered the following errors:
3>
3> @"Error 1
3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3>        ErrorDetail: The remote hosting service is not configured.
3>        ErrorType: Configuration
3>        ErrorTypeName: Configuration
3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3>        Source: RemoteWebSite
3>        SourceName: Remote Web Site Deployment
3>
3> @"Error 2
3>        CorrelationId: ceeeafab-3834-40ea-b360-c29d103e2248
3>        ErrorDetail: The remote hosting service is not configured.
3>        ErrorType: Configuration
3>        ErrorTypeName: Configuration
3>        ExceptionMessage: The trial period for this product has expired or Secure Store Shared Service is not supported for this SKU.
3>        Source: RemoteWebSite
3>        SourceName: Remote Web Site Deployment
3>Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. Please see the output window for details.
========== Build: 2 succeeded, 0 failed, 0 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========

"error: thread-local storage not supported for this target"

I have a program that uses the __thread specifier, to be run on a Solaris 9/UltraSprac.
I am not able to compile it using gcc 3.4.4 or 4.0.4, it emits the msg "error: thread-local storage not supported for this target".
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o func_stack.o func_stack.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v7 -auxbase-strip func_stack.o -Wall -version -o /var/tmp//cc0poHSN.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this target
xs@gamera% gcc -v -D_REENTRANT -c -o func_stack.o func_stack.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -I. -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS func_stack.c -quiet -dumpbase func_stack.c -mcpu=v9 -auxbase-strip func_stack.o -version -m32 -o /tmp/ccjsdswh.s -r /tmp/cc2w4ZRo.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
func_stack.c:16: error: thread-local storage not supported for this target
func_stack.c:17: error: thread-local storage not supported for this target
func_stack.c:19: error: thread-local storage not supported for this targetJust as comparison, the corresponding output of compiling another file which does not have __thread declaration is as follows:
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Reading specs from /opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/specs
Configured with: ../srcdir/configure --prefix=/opt/gcc/3.4.4 --disable-nls
Thread model: posix
gcc version 3.4.4
/opt/gcc/3.4.4/libexec/gcc/sparc-sun-solaris2.8/3.4.4/cc1 -quiet -v -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v7 -auxbase-strip common.o -Wall -version -o /var/tmp//cc4VxrLz.s
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/../../../../sparc-sun-solaris2.8/include"
#include "..." search starts here:
#include <...> search starts here:
/opt/gcc/3.4.4/include
/opt/gcc/3.4.4/lib/gcc/sparc-sun-solaris2.8/3.4.4/include
/usr/include
End of search list.
GNU C version 3.4.4 (sparc-sun-solaris2.8)
        compiled by GNU C version 3.4.4.
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/usr/ccs/bin/as -V -Qy -s -xarch=v8 -o common.o /var/tmp//cc4VxrLz.s
/usr/ccs/bin/as: Sun WorkShop 6 update 2 Compiler Common 6.2 Solaris_9_CBE 2001/04/02Note that the last 2 lines seem to suggest that a Sun assembler is used as the back-end of gcc. I am not sure whether the failure to compile the first file (with __thread) was due to the incompatibility of this Sun assembler. In the first case, the error msg was emitted before these 2 lines are printed.
I further read a post about gcc 3.3.3's inability to compile code that has __thread in it, on a HP-UX 11.11: http://forums12.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1216595175060+28353475&threadId=1148976 The conclusion seems to suggest that "the 2.17 GNU assembler did not support thread local storage" and gcc sees that and thus disallows TLS.
If the assembler is the culprit, then does anyone know whether this "Sun WorkShop 6 update 2" assembler in my installation can work with TLS? And how come a Sun assembler becomes the back-end of gcc? I read that gas (the GNU assembler) is the default backend of gcc. (How) can one specify the assembler to be used for gcc?
As an aside, I am able to compile my file on this same Solaris 9/UltraSparc platform using the Sun Studio 12 C Compiler:
xz@gamera% cc -V -# -D_REENTRANT -c -o func_stack.o func_stack.c
cc: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12
### Note: NLSPATH = /pkg/SUNWspro/12/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/pkg/SUNWspro/12/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
###     command line files and options (expanded):
### -c -D_REENTRANT -V func_stack.c -o func_stack.o
/pkg/SUNWspro/12/prod/bin/acomp -xldscope=global -i func_stack.c -y-fbe -y/pkg/SUNWspro/12/prod/bin/fbe -y-xarch=generic -y-xmemalign=8i -y-o -yfunc_stack.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly -V -D_REENTRANT -m32 -fparam_ir -Qy -D__SunOS_5_9 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix -D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun -Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/pkg/SUNWspro/12/prod/include/cc "-g/pkg/SUNWspro/12/prod/bin/cc -V -D_REENTRANT -c -o func_stack.o " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
acomp: Sun C 5.9 SunOS_sparc Patch 124867-01 2007/07/12Interestingly, the output no longer mentions the "/usr/ccs/bin/as: Sun WorkShop 6 update 2" assembler.

Just as another comparison, I compiled a file without __thread on the Solaris 9/UltraSparc platform using gcc 4.0.4. Not surprisingly it worked. But I no longer see the mention of the Sun assembler as in the case of gcc 3.4.4. Nor did I see the mention of "GNU assembler" as in the case of gcc 4.0.4/Solaris 10/x86. Instead, I saw something called "iropt" and "cg". Does anyone know what they are?
xz@gamera% gcc -v -Wall -D_REENTRANT -c -o common.o common.c
Using built-in specs.
Target: sparc-sun-solaris2.9
Configured with: /net/clpt-v490-0/export/data/bldmstr/20070711_mars_gcc/src/configure --prefix=/usr/sfw --enable-shared --with-system-zlib --enable-checking=release --disable-libmudflap --enable-languages=c,c++ --enable-version-specific-runtime-libs --with-cpu=v9 --with-ld=/usr/ccs/bin/ld --without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
/pkg/gcc/4.0.4/bin/../libexec/gcc/sparc-sun-solaris2.9/4.0.4/cc1 -quiet -v -iprefix /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/ -D__sparcv8 -D_REENTRANT -DMESS common.c -quiet -dumpbase common.c -mcpu=v9 -auxbase-strip common.o -Wall -version -m32 -o /tmp/ccSGJIDD.s -r /tmp/ccKuJz76.ir
ignoring nonexistent directory "/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/../../../../sparc-sun-solaris2.9/include"
ignoring nonexistent directory "/usr/local/include"
ignoring nonexistent directory "/usr/sfw/lib/gcc/sparc-sun-solaris2.9/4.0.4/include"
ignoring nonexistent directory "/usr/sfw/lib/../sparc-sun-solaris2.9/include"
#include "..." search starts here:
#include <...> search starts here:
/pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4/include
/usr/sfw/include
/usr/include
End of search list.
GNU C version 4.0.4 (gccfss) (sparc-sun-solaris2.9)
        compiled by GNU C version 4.0.4 (gccfss).
GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/iropt -F -xarch=v8plus -xchip=generic -O1 -xvector=no -xbuiltin=%none -xcache=generic -Qy -h_gcc -o /tmp/ccUl4mVM.ircg /tmp/ccKuJz76.ir -N/dev/null -is /tmp/ccSGJIDD.s
/pkg/gcc/4.0.4/SUNW0scgfss/4.0.4/prod/bin/cg -Qy -xarch=v8plus -xchip=generic -OO0 -T3 -Qiselect-C0 -Qrm:newregman:coalescing=0 -xcode=abs32 -xcache=generic -xmemalign=8i -il /pkg/gcc/4.0.4/bin/../lib/gcc/sparc-sun-solaris2.9/4.0.4//gccbuiltins.il -xvector=no -xthreadvar=no%dynamic -xbuiltin=%none -Qassembler-ounrefsym=0 -Qiselect-T0 -Qassembler-I -Qassembler-U -comdat -h_gcc -is /tmp/ccSGJIDD.s -ir /tmp/ccUl4mVM.ircg -oo common.o

Authentication with Edge, weinre is not supported for Fiddler

Environment
laptop- laptop Windows 7
mobile- iOS iPad
I installed Edge, the iOS client, chrome extension, as well as Fiddler and CharlesProxy. We have an app that requires authentication, and the UN/PW cannot be passed via URL params. I configured the iPad to use a proxy, as detailed in http://blogs.adobe.com/edgeinspect/2012/05/16/shadow-charles-proxy-virtual-hosts-workflow/ Both proxy apps use port 8888 by default. The site I am trying to hit is external and not a localhost. Here is what I am seeing so far.
Using Fiddler, I am able to connect remotely, and essentially, what is shown on the iPad is a mirror of my laptop's chrome browser. The problem is that I am unable to initiate remote inspection using weinre, specifically, under the weinre remote button, my device is not listed
Using Charles Proxy, again, I can connect remotely, but am unable to get past the authentication screen. However, weinre's remote inspection is working and my device is listed under devices. The request looks correct, but when I try to enter a valid UN/PW in the iPad, an error dialog shows with "server returned incorrect response type [200]".
How is the correct way to authenticate with Charles? Or is there a way to have weinre attach correctly using Fiddler2?
TIA.

Hi Christian,
The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
http://azure.microsoft.com/en-us/support/options/
You can check the following links for similar issues.
The operation is not supported for your subscription offer type
Could not submit the request to create database
DBNAME. The operation is not supported for your subscription offer type
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell wh

I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?

Apple Menu --> About this Mac.
Mylenium

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2)

Is 11.1.2.1 (32 bit) not supported for windows xp professional (SP2).
Edited by: 867760 on Aug 18, 2011 3:36 PM

No, it is not supported as a server.
Please refer: http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls for supported versions.
HTH-
Jasmine.

Since Flash CS6 Is not supported for OSX 10.8, can cloud members have Flash CS5?

Since Flash CS6 Is not supported for OSX 10.8, can cloud members have Flash CS5?
I see that Flash CS6 is not supported (http://helpx.adobe.com/flash/kb/mountain-lion-support-flash-professional.html ) . My coworkers and I are not able to see some fonts and the colorpickers are not working properly as mentioned at the URL.
Can you make the previous version of Flash available for download and use with cloud membership just for this OS X 10.8 issue.
It'd be more of a hassle for us to revert back to an older OS then to just get an extra older version of Flash on our system.
Thanks ahead,
-Line

flash looks like the only adobe victim: http://www.adobe.com/products/creativesuite/faq.html#lion-os

Not able to create database even with a subscription. (The operation is not supported for your subscription offer type)

Hi,
I am trying to create a SQL server database, but are not able to. I get this message: The operation is not supported for your subscription offer type.
I have to azure accounts and this is only happening in one of them.
I have created a subscription, but I can see that I have 1250 NOK in credit that is expiring in 29 days.
Regards
Christian
ChristianLLoyd

Hi Christian,
The error you saw should only occur for a subscription used with a free trial offer type. Please use the below link to open a support ticket.
http://azure.microsoft.com/en-us/support/options/
You can check the following links for similar issues.
The operation is not supported for your subscription offer type
Could not submit the request to create database
DBNAME. The operation is not supported for your subscription offer type
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

The requested action is not supported for this object. [message 131-171]

Hi,
One user is having the below error message appear when she attempts to print remittances. This has only started happening since yesterday and all other documents are still printing.
"The requested action is not supported for this object. [message 131-171]"
Any ideas what could be the problem?
Regards,
Mohan

Hi Johnson,
I have not tried your suggestion till now as I am waiting for the database copy from my client.
Just a quick question, As I already mentioned earlier and I also keep getting the issues from the users reporting that the user's get this error only if they print 'remittance advise reports' has multiple invoices.
The report prints fine if it has single invoice even if it is a check payment.
Will your suggestions address this as well?
Regards,
Mohan

Usrp driver 1.3 do not support for Labview 2013 64 bit ??

Similar Messages

Maybe you are looking for