UT 2004 Hardware audio problems, aswell as some other gam

I have an Audigy 9000 (I bought it OEM so all I know is what it tells me in the control panel) and all my drivers are up to date. When in Unreal Tournament 2004 all the music and sound is perfect if I keep it in 3D audio mode but when I Change it to Hardware 3D or HW 3D+EAX it wont play any music and in the intro movie (and the rest of the game) no music plays and alot of the sounds are really quiet while some are rediculously loud. I can play it fine in 3D sound mode but I did not buy a good audio card to replace my integrated 5. sound card just to use the same settings. Does anyone else have this problem and how can I fix it's Also in World of Warcraft no sound comes out during movies and there is no music in the game but all the other sounds play. But UT 2004 is my primary concern, I even tried re-installing it and yes my UT2004 is the latest vers.

Quote from: Stu on 07-May-07, 20:41:21
Basically if you're having audio problems in Vista, you should look for latest Vista drivers from your chipset manufacturers website (links can be found in the Download forum here), and if you cannot obtain Vista drivers then you should look to buying a new sound card which does have Vista support
Wait and buy a new sound card. Test this first! Install lets say XP and then after your normal soundcard installation "copy" the installed sounddrivers folder for you specific card. Then you paste that folder on a usb drive/cd or another harddrive that you again c/p inside to Vista when thats installed. Check in the device manager for audio and Update that with the drivers from your copied drivers folder from XP if you dont get an automatic driverinstallation. If you do use that guide. Vista will prolly scream that the drivers where'nt checked etc. Skip that mess and just install anyway (on your own risk ofcourse! ) and then reboot the pc. If all goes well as it did for me the sound will now work flawless even if not a specific software that came with the card might do. If this tip didnt work well then its probably time for a total new soundcard that does support Vista 100%. Good Luck!
/UN

Similar Messages

Early 2009 software-hardware audio problems

I can't seem to put my finger on what is causing the output audio to cease functioning. The problem usually manifests as unable to make any changes to Perferences/Sound where Sound Effects - Output - Input are all greyed out and unselectable and the Audio volume icon (while being checked in the dialogue box) does not appear in the Menu bar (just the space the icon should occupy). Rebooting does not fix the issue, neither does repairing Priviledges/Permissions with Disk Utility.
Unplugging the computer and holding the power button (SMC reset?), then plugging in the power and holding the power ON button until the Mac chimes, has fixed the System Preferences issue, but as I was typing this, the audio started getting fuzzy and then quit.
Moving the Output volume control had no effect, but I was able to restore audio by fiddling with the external speaker cable plug. This procedure does not always fix the issue.
Is this possibly the beginning of the end of the audio board? I'm confused by the System Preferences behavior and the effect of physically pushing the audio jack in and out to restore audio.
Thanks for all replies.

The mini has been shut down for a week. When I shut it down, sound was working beautifully.
Just booted computer up and back to the problem of no Sound effects, no output, no input in the Preferences pane. And there was no "bong" thru the speaker.
Restart, get "bong" and get Audio preferences window to mostly work, but each and every time I try and change the Output volume with the cursor, get a spinning wheel of death and no or minimal output change. Try the keyboard sound up and down keys, get the icon window, but can't move volume much at all, and my key inputs are greatly delayed, up to 2 minutes. Only sound slider that works is on the menu bar, and it is inhibited as the volume icon continues to flash on the screen, reflecting key inputs made minutes ago. The sound icon in the menu bar is still selected, but can't get slider to drop down to make change because color wheel of death is still spinning.
Checked the Force quit, but nothing is shown as "not responding". This looks more and more as if there were some software corruption, but no idea where to look.
The console log is filling up with line after line of failure notes. A small sampling is below:
Sep 15 18:18:32 halfway-mini kernel[0]: Sound assertion ""( kRequestStateCORB == fCodecRequest->state ) = CORB engine stuck or response was missing"" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDAController/AppleHDAController.c pp" at line 2013 goto handler
Sep 15 18:18:32 halfway-mini kernel[0]: Sound assertion "0 != err" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/IOHDAFamily/IOHDACodecDevice.cpp" at line 128 goto Exit
Sep 15 18:18:32 halfway-mini kernel[0]: Sound assertion "0 != runVerb ( kIOHDAVerbSetPinWidgetControl, savedPinWidgetControlValue, &savedPinWidgetControlValue )" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDA/AppleHDAWidget.cpp" at line 2028 goto handler
Sep 15 18:18:32 halfway-mini kernel[0]: Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDA/AppleHDAEngine.cpp" at line 8255 goto handler
Sep 15 18:18:38 halfway-mini kernel[0]: Sound assertion ""( kRequestStateCORB == fCodecRequest->state ) = CORB engine stuck or response was missing"" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDAController/AppleHDAController.c pp" at line 2013 goto handler
Sep 15 18:18:38 halfway-mini kernel[0]: Sound assertion "0 != err" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/IOHDAFamily/IOHDACodecDevice.cpp" at line 128 goto Exit
Sep 15 18:18:38 halfway-mini kernel[0]: Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDA/AppleHDANode.cpp" at line 370 goto Exit
Sep 15 18:18:38 halfway-mini kernel[0]: Sound assertion "0 != fHDAFunctionGroup->powerState ( &restorePowerState )" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDA/AppleHDADriver.cpp" at line 333 goto handler
Sep 15 18:18:39 halfway-mini kernel[0]: Sound assertion ""( kRequestStateCORB == fCodecRequest->state ) = CORB engine stuck or response was missing"" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDAController/AppleHDAController.c pp" at line 2013 goto handler
Sep 15 18:18:39 halfway-mini kernel[0]: Sound assertion "0 != err" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/IOHDAFamily/IOHDACodecDevice.cpp" at line 128 goto Exit
Sep 15 18:18:39 halfway-mini kernel[0]: Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDA/AppleHDAWidget.cpp" at line 1935 goto handler
Sep 15 18:18:40 halfway-mini kernel[0]: Sound assertion ""( kRequestStateCORB == fCodecRequest->state ) = CORB engine stuck or response was missing"" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDAController/AppleHDAController.c pp" at line 2013 goto handler
Sep 15 18:18:40 halfway-mini kernel[0]: Sound assertion "0 != err" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/IOHDAFamily/IOHDACodecDevice.cpp" at line 128 goto Exit
Sep 15 18:18:40 halfway-mini kernel[0]: Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDA/AppleHDAWidget.cpp" at line 2208 goto Exit
Sep 15 18:18:40 halfway-mini kernel[0]: Sound assertion "0 != result" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDA/AppleHDAWidget.cpp" at line 1938 goto handler
Sep 15 18:18:41 halfway-mini kernel[0]: Sound assertion ""( kRequestStateCORB == fCodecRequest->state ) = CORB engine stuck or response was missing"" failed in "/SourceCache/AppleHDA/AppleHDA-171.1.2/AppleHDAController/AppleHDAController.c pp" at line 2013 goto handler
I have no concept of what the reports indicate, other than is seems to be related to the sound issues. Are there some plist files that could be corrupted?

AWARE 5.2/ Audio problem running on some local computers

Hi everyone,
I received emails from clients saying that when they run the
packaged pieces
from the CD, it works great. When they copy the whole CD
contents into some
of their local machines, some audios are not playing. This
occurs on
lessons loaded on the hard drives of certain computers. It
doesn't happen
when the lessons are run from a CD.
The error message they receive is: A problem was encountered
while trying
to play the sound in icon "1-010a.wav". The internal sound
driver reports
the following error: "The filename format is incorrect,
possibly because
long filenames are not supported on this volume".
But 1-010a.wav is only 6 characters long, so I'm not sure
what the problem
is. Has anyone has had this problem before? any solution to
this?
Thanks in advanced,
Omar

> Does it matter what Operating System they're using? I
believe they use
> Windows 98SE and Windows 2000 Pro for their local
workstations. Also, I'm
> not sure yet but i am guessing they might be pulling the
lessons from a
> network drive (server). Could that also cause a problem
with audio
> pathnames?
The length of the path to My Documents or Desktop varies
between different
versions of Windows, so you could, for instance, experience
the error on
Windows 2000, but not on Win 98.
Simply pulling from the server wouldn't necessarily cause the
problem, but
if the files are buried deep on the server then path length
could still be
your problem.
However - what are the filenames for the files that fail? And
what about
files that play OK? Do they all have the same filename length
or are they
different?
Steve

Audio problem only with some application and with games

Hi,
Some days my ipad2 presents this problem: audio is ok with itunes and when I look a video on youtube but it not work when I use some app (for example, Sky Go, app for cinema to look trailer) or with games.
What should I do?
Thanks

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Xfi Xtreme Audio Problems with Microphone and other things NEED HELP!!!!

? Alright i have exhausted my search for an answer for my problems.... This is a last resort now!
Im running Windows 7
st Problem: I was having problems with my microphone where people heard themselves through my microphone. Ok well i have a creative Fatility series headset with a supposed noise canceling mic. So last night i was like screw it imma put in the install disk for my sound card Xfi Xtreme Audio.
This Arose my 2nd Problem: Now that the drivers were installed and i finaly got a volume panel it says im running Windows Vista. The name next to my card says Sound Blast X-Fi Xtreme Audio (Vista). Alright so i am running windows 7.... What the heck! Next thing is my microphone doesnt even work! This is just awsome btw and im pretty sure the volume panel isnt even the way it was when i was on an XP system.
So if anyone has a fix to this problem let me know it would be great!

A quick update i was able to fix Problem 2, i had to get rid of what i installed so im just back to Problem . I dont have the VOlume Panel anymore but my microphone still seems to make it so that people can hear themselves....

Bizarre problem - port 80 & some others blocked in...

I've been suffering from a very odd problem for the last week.
Without warning (or any changes on my end) I lost connectivity on port 80 both in and out of my adsl modem.
So no web access outbound and no access inbound to the small website I host. Port 80 on the modem is forwarded so that's not the inbound problem.
Various other ports do work in and out (e.g. SSH, FTP, SMTP, POP and some higher numbers too) but 8080 and 8081 are also blocked (inbound at least).
It doesn't appear to be the modem as I've reset it to factory settings and get the same behaviour and also replaced it with a brand new modem.
Equally I can't understand how it could be in the exchange either as surely that's not port-dependent (unless there's some very weird port-misconfiguration on an SBC or similar).
Anyone heard of this sort of problem before?
thanks
Paul

I've been suffering from a very odd problem for the last week.
Without warning (or any changes on my end) I lost connectivity on port 80 both in and out of my adsl modem.
So no web access outbound and no access inbound to the small website I host. Port 80 on the modem is forwarded so that's not the inbound problem.
Various other ports do work in and out (e.g. SSH, FTP, SMTP, POP and some higher numbers too) but 8080 and 8081 are also blocked (inbound at least).
It doesn't appear to be the modem as I've reset it to factory settings and get the same behaviour and also replaced it with a brand new modem.
Equally I can't understand how it could be in the exchange either as surely that's not port-dependent (unless there's some very weird port-misconfiguration on an SBC or similar).
Anyone heard of this sort of problem before?
thanks
Paul

Audio problems with SBLive! 5.1 and Windows XP Pro,

I just reinstalled Windows XP Pro from a slipstreamed CD with SP2 on it. (That means I can't just remove SP2 without reinstalling Windows.) Now, when I play a game the audio skips and stutters for the first 5-0 min of gameplay. The skipping and stuttering goes away eventually, but its REALLY annoying. This is the only hardware problem I've had with SP2, and I would like to know if there is a patch in the planning to fix all the SP2 Sound Blaster problems, or do we all have to find our own work around for these things.
If anyone has a solution for this please let me know. I've already installed the UniDriver thing, and it still acts up. I've tried removing and reinstalling everything, cleaning out my registry, and rebooting. Defragging my HD did not work either. Nothing seems to work.
CPU= AMD Athlon XP 2600+
RAM=704Mb
Video=GeForce 4 MX440 AGP 28DDR
Please help soon.

I think I may have solved my problem. I recently installed Full Spectrum Warrior. I installed it to a different dri've than all of my other games. Lo and behold, no audio problems. After some further investigation, I believe that the audio problem lies in an old hard disk dri've that is in the beginning stages of failure. After I actually thought about it, my load times from this hard disk have been taking forever, but Full Spectrum Warrior loads very quickly. The dri've is going to die! But I guess it's ok, the dri've is almost 0 years old, and this is the 3rd computer its been in.
Thanks for your help,
Josh

Workaround for some W510 Audio Problems. Lenovo, please take a look at this!

Hi all
I believe most or all of the people are affected with poor sound quality of W510. I do believe there are some people who bring their laptops along and not convenient to get a external sound card and external speakers on the road. I am not too sure, but what I think that causes audio problem in W510, T410 or T510 is due to the implementations of Combo Audio/Mic Jack. So far, I have not heard any audio problems from X201 or W701/W701ds with a separate mic and audio jack (1 green and red, instead of 1 combo) Listed machines are using Conexant 20585 SmartAudio HD Sound Card.
The workaround is to force install Conexant 20561 SmartAudio HD Driver through Device Manager
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73721
Problem Partially Resolved
1. Using Audio Director - Classic mode enables you to use both internal speakers and external speakers/headphone simultaneously. (By right, this should be in Multi-Stream mode, due to this driver not programmed for W510). However, the volume of the internal speaker will be reduced by half if an external speakers/headphone is plugged.
2. The sound quality is improved (tested with internal speakers).
3. Solved Irregular Volume Problems.
Drawback of using this driver
1. Using Multi-Stream mode in this case would not enables you to use both internal speakers and external speakers/headphone simultaneously. However it would just make your internal speaker to be louder. External speaker/headphone would not work if Multi-Stream mode is selected.
2. Custom EQ is not usable, if used, only the right channel of internal speaker, external speaker/headphone would work, and the sound quality will be like a spoilt radio.
3. Only Voice (VoIP) EQ is optimized for external speaker/headphone. Using Off, Jazz, Dance or Concert EQ would make you feel that the vocal (singer's voice) is diffused, blurred like excessive 3D effects.
4. Even if any preloaded EQ is selected, after system has been restarted, the selected EQ would still be saved, but the band (31Hz - 16KHz would be changed back to Off EQ) It is ok as it just affects the graphics, not the sound.
I know that Forum Administrators, Lenovo Staff, Community Moderators, Gurus and Volunteered Moderators/Users would be surfing around and looking for new post. Please take a look and leave a post or PM to me, thank you very much.
It is alright if Lenovo don't think that there is any problems regarding the sound in W510. However, I do believe most users/owners of W510 would appreciate if the sound system could be further improved through a better driver or new revision of hardware to something like a T400 standards or something. Some users would spent so much $ just to get all-in-a-box solution and would not want to invest further just for a external card to sacrifice portability and use more $. Finally, I still do believe that W510 audio problems can be resolved.
Best Regards
Peter

Hi ckhordiasma
Thanks for reviving ths old thread. How about trying Dolby drivers? It sounds great and could possibly resolve those issues without going through too much troubleshooting.
The link is under my signature.
Hope it helps!
Happy 2012!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

Audio Problems with some HD channels (HBO mostly)

I'm experiencing sporadic audio problems with a handful of HD channels. Most noticably on HBO.
When the audio is output through the television itself, it sounds OK... however if the audio is output through my home theater receiver and speakers, I can hear a lot of static and "crackling" on certain movies and shows.
The issue isn't the home theater setup, as I have several other components that use it (AppleTV, Bluray, Xbox, etc.) and the audio sounds perfect from them.
The only device that displays that poor audio is the FiOS Set Top Box and even then it's only on a few channels.
I thought maybe that the optical audio cable between the set top box and the receiver may have been bad, so I replaced that. Same problem even with the new cable.
The problem is either with the Set Top Box itself or the audio levels on the stream from the channel provider.
Has anyone experienced anything similar to this, and if so... did you resolve it somehow?
Any help you could provide would be most appreciated.
Thanks!

Check the following.
Help & Settings > Settings > Entitlement Information
Here are possible entitlements mapped to channels.
101 - 104 : PSB HD
407 - 433 : Essential Extra / Unlimited Extra
446 - 453 : HD Extra
501 : Sky Sports 1
502 : Sky Sports 2
507 - 509 : BT Sport SD
510 - 512 : BT Sport HD
513 - 514 : Essential Extra / Unlimited Extra
530 - 540 : Sky Movies
555 - 563 : Kids Extra
You need 'HD Extra' for channels 446 - 453. I have the free 'BT Sport HD' but that does not cover entertainment HD channels. You need to subscribe to the HD Extra bolt-on for £3 for them. Have you ordered HD Extra (it only became available from last Sunday)?

Audio Problem on Ubuntu 12.04

Hello all
I have problems with audio playback on Ubuntu 12.04
On earlier Ubuntu 10.04 I used pulseaudio to aquire Java Sound System mixer.
But I have not succeeded in getting Java Sound System mixer on Ubuntu 12.04
Using one of the hardware mixers that AudioSystem.getMixerInfo() returns is not a good solution.
Those mixers seems to have problems swallowing the audio packages I write into them.
Therefore the audio queue is growing, and the sound is getting behind the picture in time.
Thankful for any suggestions I can get.
Best regards
Per-Jarle

As a really wild guess that probably has something to do with a system driver thus not a java problem really. Still guessing - there might be a way to configure the driver, perhaps via Java, or some other method that fixes the problem.

Audio Problem since upgrading to Mountain Lion

Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though.

Severe audio problems in After Effects CS4 and MXF and more...

Hi!
I've been experiencing a lot of problems lately with several CS4 products.
First, and the worst, is that there seems to be some severe audio bug in After Effects when handling mxf-files. I pre-cut a project in premiere CS4, shot with a Sony EX1, and then imported the project in After Effects CS4.
In premiere everything worked fine and I had all the audio. In AE however the audio matched with the MXF-files disappeared (Yes I had the import audio box checked). All other audio worked fine from the music tracks and so on, but the MXF-files (MXF for NLE) was completely blank, the waveforms were completely flat. I checked every option there is in AE regarding audio and tried enabling and disabling XMP ID's and so on. After a lot of tweaking and testing I understood that the problem was not with any settings anywhere, the MXF-files lacked audio even if I started a new project and just imported the MXF-file.
The problem seems to be connected to when importing from Premiere. My colleague was editing a similar project on his computer in After Effects without problems, and he started out fresh in AE (didn't pre-cut in premiere). However, we tried to move my project to his computer, to see if the problem was connected with incompability with my hardware or such, and he got the same problem as me when he opened the project. Waveforms on MXF-files were completely flat. Certain confirmation that the problem was not connected with my computer appeared when he later reopened his own project, that had worked fine before, and audio was now completely gone - waveforms flat. An hour later, by chance, his audio suddenly popped back.
I have experienced this problems in two different projects in different forms (but both pre-cut in premiere). In the first, audio disappeared while previewing but was there when I ctrl-scrolled and rendered (no I hadn't muted audio in the preview panel). In the second, audio was completely gone even when rendered.
In both cases I tried saving and restarting the computer, reimporting from premiere, starting a fresh after effects project and only importing the mxf-files, changing the project settings, fps fixed to the correct instead of auto, changing output audio mapping, changing XMP, and so on in every possible way and combination I could imagine.
At my company our suspicion is that After Effects flags mfx-files imported from Premiere in some wierd way, to strengthen and ensure compatibility between the two - regarding different audio tracks, settings and effects from premiere (and this is almost what you could suspect that the XMP ID is for, but as explained with or without doesn't change a thing regarding this). We have no problem with the pure MXF support for AE, as MXF-files work just fine in After Effects if you import them directly and have not imported them through premiere earlier (but after a file has been "flagged" you seem to be sc***ed)
Anyone else experiencing this? Or am I missing something huge?
As additional notes, the dynamic link function seems extremely buggy and both premiere both sometimes complains about "dynamic link already in use and only one connection blah blah" even though only one link is used, and even though you restart the projects, programs, computer, whatever.
In furher addition Adobe Media Encoder (which also seems to be using some sort of dynamic link offspring) is super-buggy and most codec formats either doesn't start to render or just renders partially and then the program hangs. The problem have a connection with a process named pproheadless.exe eating upp all the RAM (4gbs).
(My workstation has been working smoothly for one and a half years and I have had very little problems with CS3 and "just" AE CS4. I am cautious of updates, don't have spyware and use Quicktime 7.5 as 7.5.5 is superbuggy and people seems to have problems with 7.6 and it doesn't fix the gamma issues anyway.)
Sorry if this was a long post but the problem is compl

Dude, that's what these forums are all about. Everyone in here says they dont work for Adobe, but they all act like apologists for what is clearly a disaster of a software release. My complaints aren't as specialized as yours, just very basic, and I wont go into all of them, because the list is long, and includes nearly every program in CS4.
I'm going for a refund, either from the retailer or my credit card company. Releasing software like this is dishonest.

Audio problem and macbook pro very slow

Hello,
I have a macbook pro for less than a year.
The latter has begin to be very slow. In addition, I have no sound which are emitted from my Mac, setting apart the opening gong. By the jack, there is no red light that are emitted. I tried to go in the program "audio setup midi" but it does not even want to open. So I tried to open the configuration panel go to select a new audio output device, but to my surprise, after an interminable waiting times, I got a list of blank audio device .. .
I noticed that it started when I put my Mac to version 10.7.4 ... So this is very recent ...
When downloading the update, I was editing a script with automator and my Mac was rammed by an HDMI cable has a television, if it ever can help.
I was wondering how to solve my problem.
thank you
Bonjour,
j'ai un macbook pro depuis moins d'un an.
Ce dernier a commencer a être très lent. De plus, je n'ai plus aucun son qui es émis de mon Mac, mise a part le gong d'ouverture. Par la prise jack, il n'y a pas de lumière rouge qui es émis. J'ai essayé d'aller dans le programme "configuration audio midi" mais celui-ci ne veux même pas ouvrir. J'ai donc essayé d'ouvrir le paneau de configuration pour aller sélectionner un nouveau périphérique de sortie audio, mais a ma grande surprise, après un délais d'attente interminable, j'ai eu droit a une liste de périphérique audio vide...
J'ai remarqué que cela a commencé lors que j'ai mis mon Mac à la version 10.7.4... Donc, c'est tout récent...
Lors du téléchargement de la mise à jours, j'éditais un scripte avec automator et mon Mac était banché par un cable HDMI a une télévision, si jamais ça peux aider.
Je me demandais comment résoudre mes problème.
Merci

The startup drive is failing, or there is some other internal hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Adobe CS6 audio problem

Hey guys, I'm really new to Adobe, I've been using SonyVegas for a long time now. I thought I'd try out a different program. I really like CS6's interface, it feels really natural. However, I can't use it for what I want to do. I record game footage from my Hauppauge HDPVR and commentate games on Youtube. Whether I save the recording as an .MP4 or .MT2S when I open up a new project in Adobe and import the video it will not drag the audio in with it. It works fine in Vegas, and when I watch the video the sound plays along just fine.
This may be a really no-brainer kind of problem, but I've never had an issue importing anything into Vegas, it just simply knows the video is coupled with audio. Adobe seems to only see there is a video.
If computer specs help rule out hardware incompatibilty I'm using two GTX 670's SLI. 3rd gen i7 processor, and 16gb of ddr3 2333 ram.

Something is going on here because cs6 supports AC3 audio. Can you upload a small test file to yousendit or some other share site, so I can see if it has audio on my system.
I'm thinking something might have gone wrong with your install process. Although please try doing this although this is supposed to only apply to AVCHD media it can't hurt to try.
This solution was originally posted in another thread by a adobe employee, and even though he was talking about AVCHD media it's worth a shot IMO.
1) Quit Premiere. Launch Premiere again. Go to the Help menu and verify that you are activated (towards bottom, should see "Deactivate..." that signifies that you are activated).
2) Go to Preferences > Media > Media Cache Database. Click the "Clean" button. Import your file(s) again and see if you get audio now.
3) If 1 and 2 do not work, then could you please try to uninstall and then install Premiere Pro again.

Audio problem with T61 running windows 7

hello,
After installing windows 7 Enterprise on my T61, I have no sound.
Driver seems to be installed correctly (Device manager), speakers taskbar icon looks & functioning OK, but i can't hear nothing.
I've installed the suggested Vista driver from Lenovo web site, but the problem remains...
I must mention that there was no problem while using Windows 7 RC, the problem started after installing a clean copy of Win 7 pro.
Any suggestions?
Thanks in advance,
Eyal.

I've installed win7 over a dozen times on T61 models and never had a problem. Perhaps if you can provide more information, did you reformat your drive before install, or install overtop an existing windows version? If it helps, all my installations are on a freshly formatted partition. Windows installs working drivers on everything except the ricoh card reader, for that you just need to manually install the vista drivers from device manager and it will work. I then run system update and it installs newer drivers for some of the hardware, but like I said, never had an audio problem.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

UT 2004 Hardware audio problems, aswell as some other gam

Similar Messages

Maybe you are looking for