Utdsd segfault when trying to setup replication

Hi All,
I'm a new sysadmin at an organisation running SRSS 4.1 and around 350 SunRays (Sun Ray 100, 170, 2, 2FS) in a production environment which is very messy (outdated apps, poor performance due to software layering etc). I have been tasked with building a new environment based around RHEL 5.
First up here is my build environment:
Sun Blade 6000 Chassis
Sun Blade X6250 - Dual Xeon 5450 + 16GB RAM + 2x73GB SAS in RAID1
VMWare vSphere Hypervisor (esxi installable free) 4.1 + NFS datastore on EMC NAS
RHEL 5.3 64-bit - No updates apart from Firefox, and installing gajim from rpmforge repository.
All pre-requisites listed in install docs are installed, both 64-bit and 32-bit libraries
I'm setting up a dedicated primary server, and 4 - 8 secondaries for sessions.
I've successfully installed the SRSS software and configured it. Using either JRE 1.6.0 u 21 32-bit from sun's site, or the supplied 1.6.0 u 13 in the srss 4.3 tarball.
We are using a dedicated DHCP server with a bunch of sun ray vendor options set (ie not sun ray dhcp) on a shared LAN. I have run utconfig successfully and I can access the webadmin interface. A Sun Ray 170 and Sun Ray 2 can both get a session on the secondary server. (Only one secondary built right now)
When it comes time to setup replication between the primary and a secondary for failover group, the process fails on the master with:
[root@primary ~]# /opt/SUNWut/sbin/utreplica -p secondary01.domain.name.tld
Sun Ray Server Software 4.2
Administration Failover Configuration
Converting Administration Standalone Server to Administration Primary
<pregnant pause here - about 10 seconds>
utreplica: Warning, could not contact LDAP server on secondary01.domain.name.tld on port 7012.
Do you want to continue with configuration of this server as a primary? (y/[n])? n
[root@primary ~]#When checking the secondary01 server, utdsd has failed with a message in syslog:
Aug 10 11:33:08 secondary1 kernel: utdsd[8762]: segfault at 0000000000000010 rip 00000000f7f2684d rsp 00000000ffb26e80 error 4If I answer yes to the above question and then try to run replication setup from the secondary, utdsd segfaults on the primary. If I watch running processes, utdsd is running all the time and instantly crashes at the same time as the error message appears on the 'calling' machine.
Where do I begin to diagnose this problem? I can't see anything useful in logs (sun ray or system) apart from the kernel report of the utdsd segfaulting.
Any help appreciated.
Regards,
tifkat

Yes. I installed with firewall off and selinux off. the primary is definitely connecting to the secondary, and utdsd is crashing sometime after the connection.
I'd like to find out where/why the utdsd is segfaulting. Any ideas how to debug this?

Similar Messages

Issues when trying to setup alternate sync location of OneDrive for Business / SharePoint 2013 Libraries

Hello,
I have an issue that prevents me from choosing the alternate location of sync'ed OneDrive for Business folders. I'm trying to setup an alternate location for synchronization, using the guidelines found in the Office support web site.
The option to replace the default sync location appears the first time a SharePoint 2013 Library or OneDrive for Business is setup for synchronization.
Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443247
At this point, the Library or personal OneDrive folder syncs correctly and the files are stored in the alternate choosen location.
However, on when trying to setup an additionnal Library for synchronization, the alternate sync location has not been saved and reverts to the default sync location. Furthermore, the option to replace the default sync location does no longer appear
on the dialog box.
Here would be a link to a snapshot (since my account has not been verified): /Forums/getfile/443249
I have tried by first sync'ing a SharePoint 2013 Library (instead of the personal OneDrive for Business folder) with the same result. Meaning that the first SharePoint 2013 Library correctly sync's in the alternate location of my choosing. However,
any subsequent attempts to sync either a SharePoint 2013 Library or the OneDrive for Business folder results in them being sync'ed to the original default location in a folder under the user's profile directory.
I'm using Office Professional Plus 2013 (64bits). The version of Groove.exe is 15.0.4605.1000 (12th March 2014 - 13 383 360 bytes).
Is there something I'm missing ?
Thanks for any help on this issue.

Hi SpringComp,
You can change the root path for libraries you sync to your computer, though you can do this only if you’re not currently syncing any libraries. If you’re already syncing at least one library and you want to change the path, you must first
stop syncing all libraries. Then, the first time you run the OneDrive for Business wizard to sync a library to your computer, you’ll see an option to change the location.
More information, please refer to the link:
http://office.microsoft.com/en-001/support/change-the-location-where-you-sync-sharepoint-libraries-on-your-computer-HA102893480.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

Help. Just got the latest and greatest ipod touch. When trying to setup icloud, my email address is verified but when I touch settings, icloud, account tries unsuccessfully to verify account.

Help. Just got the latest and greatest ipod touch. When trying to setup icloud, my email address is verified but when I touch settings, icloud, account tries unsuccessfully to verify account.

Why am I sometimes asked to verify my Apple ID by email?
When you create a new Apple ID or make certain changes to your account, Apple will require you to sign in by following the link in a verification email. This is to help protect your identity and keep your account secure. Some Apple services, such as FaceTime and GameCenter, require email validation.
How do I verify my Apple ID by email?
Simply follow the link in the verification email that says "Verify Now." Sign in with your current Apple ID and password, then click Verify Address. You can also verify by signing in at My Apple ID. You'll receive an email prompting you to verify.

I get an error 11556 when trying to setup a new account at the itunes store when trying to setup my ipad. Help!

I get an error 11556 when trying to setup a new account at the itunes store when trying to setup my ipad. Help!

There's some info on your error message number in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

I am getting a setup error when trying to setup outlook and the iCloud

I keep getting a setup error from Outlook 2007 when I am trying to setup the icloud.

Given that you're on XP, we'd better try the following document:
iTunes displays -50 error message when syncing iPod on Windows XP

Error message when trying to setup Airport Extreme Unit - Please Help

I have never tried to set an Airport Extreme, but expected it to be relatively simple.....
I have been given an Airport Extreme unit (model A1143 - 802.11n) to use to set up a wireless network in my home. I am using the airport utility app to try and set this up but recieve the following error message:
This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
I have downloaded the latest version of airport utility 6.3.1 as the old version would not install, but still i cannot get past the error message.
I am running a Macbook with OS X Lion 10.7.5 on it.
Could anyone help me with this issue and assist in getting me setup.
Thanks
Stuart

Unfortunately, things like this can happen when you try to use current software on a 6 year old product.
The solution is exactly as the message states:
You will need to use AirPort Utility 5.6 to update the firmware on the AirPort Extreme.
AirPort Utility 5.6 can be installed on a Mac running Leopard (10.5.x) or Snow Leopard (10.6.x) or a PC. If you do not have access to one of these devices, you might be able to take the AirPort Extreme to an Apple Store to have them update the firmware for you.
Once the firmware on the AirPort Extreme has been updated......then..... it will be possible to administer the AirPort Extreme using AirPort Utility 6.3.1.

White Screen when trying to setup Wifi on TX

Hi - I can't get to the wifi setup screen on my TX. As soon as I click enable radio, I get a white screen. I have tried a hard reset, and have also checked the router settings. I am able to connect wirelessly with other devices. I am not sure of what else to try - any thoughts?
Post relates to: Palm Pilot

Thank you! It worked for me as well. If I press down and hold on the back towards the left of the reset button, the white screen goes away. I was able to setup the connection.
The white screen comes back from time to time, and when I press on the back, the screen freezes sometimes too. It is very "unstable". Thank you for the tip though!

LDAP Servers not listed when trying to setup new LDAP connection

Using SQL Developer: 1.5.1
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
Windows XP client environment
Can anyone clarify how to setup LDAP connections in SQL Developer. We use LDAP for our connections with all the other Oracle tools like SQL*Plus and other developer tools like forms. LDAP is working fine for all of those tools. However, when I try to setup an LDAP connection for SQL*Developer no servers are found for the drop down box. Do we need to put the sqlnet.ora and ldap.ora files somehwere so that SQL Developer can find them? Does SQL Developer even need them? How does the LDAP server get populated in SQL Developer? Thanks. I have tried looking at other posts on this issue and nothing really jumped out at how to do this. I do have some older version Oracle homes setup also. For example we have a Oracle 6i home setup on our machines for the old versions of forms and reports.

I set it to C:\Oracle10g_DevSuiteHome_1\NETWORK\ADMIN. This is under one of my Oracle Homes on this machine that contains the sqlnet.ora and the LDAP.ora files. This didn't appear to make any difference. Still no LDAP servers listed when you try to add or build a new connection. I tried some of my other Oracle Homes and still no effect. I have also tried copying the sqlnet.or and the ldap.ora files to other directories. I have switched my default Oracle Home to point to the 9i and above homes and this made no difference.
I have never had to do anything with an environment variable called TNS_ADMIN before. I almost remember a variable called TNS_ADMIN years ago in the registery that had to be modified and it was TNS_ADMIN if I remember correclty. When you said to set an environment variable you did mean to just set or create a new environment variable using the My Computer > Properties > Advanced Tab > Environment Variables on the client machine. I just want to make sure I set the right variable. Thanks for you help and suggestons.
By the way I can connect just fine using basic or advanced connections. I just would like to use LDAP so I don't have to maintain connections when port, server or SID change. For example we just failed over and the fail over database is on a different server. We do this as a test or when needed for failover purposes. If you are using the basic and advanced connections you need to go in a update connection information. If we use LDAP this is all maintained by the DBAs and individual clients shouldn't have to maintain any connection information as long as the have the right SID. The documentation for SQL Developer doesn't really seem to address how to setup LDAP connections it just mentions that you can do it and it sounds simple.

Error 10038 when trying to setup an ODBC Client DSN

TimesTen 7.0.5.0.0 as well as 11.2.1.4.0 on some PC's return a TCP Reset when an ODBC Client DSN attempts to connect. The trace in the tterrors.log file for the 11.2 release is:
10:54:59.64 Err : SRV: 13732: EventID=3| Socket send() failed. Error (10038). File: C:/ADE/pechan_install-pop/timesten/VisiChannel/oc/src/vostcpip.cpp; Line: 742
10:54:59.70 Err : SRV: 13732: EventID=5| Socket recv() failed. Error (10038). File: C:/ADE/pechan_install-pop/timesten/VisiChannel/oc/src/vostcpip.cpp; Line: 639
10:54:59.75 Err : SRV: 13732: EventID=68| Failed to read request from client. Closing connection without reply.
The Client displays a 10054 error code.
The errors with 7.0.5 are identical except for the line numbers:
10:56:35.87 Err : SRV: 10520: EventID=3| Socket send() failed. Error (10038). File: d:/TTBuild/main_0313/VisiChannel/oc/src/vostcpip.cpp; Line: 734
10:56:35.91 Err : SRV: 10520: EventID=5| Socket recv() failed. Error (10038). File: d:/TTBuild/main_0313/VisiChannel/oc/src/vostcpip.cpp; Line: 629
10:56:35.96 Err : SRV: 10520: EventID=68| Failed to read request from client. Closing connection without reply.
This happens when setting up the ODBC Client on Windows: when clicking the "refresh" button on the client screen. Tracing shows the TCP message going to the server and a TCP RST being returned. If anything other than the TT_INTERNAL_DSN message is sent, the server returns a TCP FIN, so it seems comms is ok.
We cannot find anything common on the PC's that do or do not work. Running Windows XP.
Any help would be appreciated.
Thanks
Lou

On another forum, I found the hint, "Another possible cause is the presence of layered winsock providers. "netsh winsock show" at a cmd prompt will show you the installed providers and you can try removing any non-microsoft ones."
Tried this and on examining the netsh output from the affected PC's, found that they have Embassy Trust Suite by Wave Systems installed. Evidently Dell pre-installed this on some of their PC's.
Anyway, on uninstalling this software, the problem has been solved.

Error - 6753 and 10057 when trying to setup airport express in XP

I keep having this problem when i try and use my airport express. My PC can pick up the airport but when i try and click manual setup or continue i get error -6753 or 10057.
Please can someone help me out with a step by step procedure to set an express up with Windows XP

Unfortunately, things like this can happen when you try to use current software on a 6 year old product.
The solution is exactly as the message states:
You will need to use AirPort Utility 5.6 to update the firmware on the AirPort Extreme.
AirPort Utility 5.6 can be installed on a Mac running Leopard (10.5.x) or Snow Leopard (10.6.x) or a PC. If you do not have access to one of these devices, you might be able to take the AirPort Extreme to an Apple Store to have them update the firmware for you.
Once the firmware on the AirPort Extreme has been updated......then..... it will be possible to administer the AirPort Extreme using AirPort Utility 6.3.1.

Getting OSS Status Error 28 when trying to setup backup drive to time capsule on wife's new macbook air, what is error 28?

Time Capsule--OSS Status Error 28 when attempting to set backup drive to time capsule data drive

It just means it is not available.. I think.. apple doesn't exactly give you a guide to errors.
What OS is on the MBA.. Yosemite??
That would be absolute bog standard problem.
Same as here.. Time Capsule OSStatus error 28
Even with older OS apple introduced some poor networking decisions at lion which have carried through.
1. Try a simple reboot of the TC.. then try a reboot of the whole network.
No luck.
2. Reset the TC to factory and redo the setup from MBA.
Use short names no spaces and pure alphanumeric names and passwords.. nothing more than 20 characters.
Use WPA2 Personal security only and password that conforms to the above.
No luck
3. Make sure the wireless is set to IPV6=Link-local only in the MBA.
Tell us if those all fail.

HT4527 Getting error code 12004 when trying to setup home share on a new laptop. Can't find what it means.

My daughter received a new macbook pro for Christmas and is trying to turn on home sharing in itunes and it is giving her an error code 12004 but we cannot find what that means. Does anyone know where to find error codes and their definitions?

First thing to do is get the CC off your system. Then try the direct download option linked below...
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Why I am getting an error stating incorrect media types when trying to setup playlists?

I recently created a new playlist I wanted to setup on my iPhone, but I get an error message telling me that iTunes & iCloud cannot use the playlist as it has file types it cannot use.
The only file types in the playlist are AAC's & MP3's.
I don't gget it. I understand that iCloud will not do really large files or videos, but I checked the file sizes, bit rates and types of each song and none of them are anything that iCloud says it cannot use.
What the heck is going on?

iCloud also doesn't do tunes with bitrates below 96 Kbps.

ERROR ( 0 :: 42) when trying to setup sound on MPEG-4 export

I got a project with an ac3 file and a YUV 10-bit uncompressed video file that are same lenght on my comp (2;37;04).
When I try to set up the option for sound for a QT MPEG-4 export ; AE crashes with error ( 0 :: 42 )
Any clues as to why? Anyone has has that same bug ?
Thnak you.

Any clues as to why?
Cyclic use of the same routines for encoding and decoding at the same time, when those routines are not properly made "safe" in terms of memory management. Or something up with the audio. The smart thing to do as a start would be to convert the AC3 file to a conventional WAV, then try that again.
Mylenium

Utdsd segfault when trying to setup replication

Similar Messages

Maybe you are looking for