Utilisation CPU et Ram non utilisé à 100%

Bonjour à tous !
Je m'excuse par avance d'exposer mon problème car en regardant sur ce forum d'autre personne ont eu le même soucis mais comme toutes les machines sont différentes, j'ai voulu vous parler du mien avec ma config.
J'utilise donc Cs5 (Première et After effects) et je me rends compte lorsque je fais une compilation rendu pour exporter mon montage finale (avec adobe encoder) que mon CPU et ma ram ne sont pas exploités à 100 % (ça ne dépasse jamais 25 ou 30% de CPU)...et du coup pour les montages lourd avec des effets (Denoise, light, ect...) ça prend beaucoup de temps (surtout si je mets en 2 pass).
[IMG]http://imageshack.us/a/img845/9032/ad04n.jpg[/IMG]
[IMG]http://imageshack.us/a/img836/2494/ad0vy.jpg[/IMG]
Voici ma config :
-Windows 7 home 64bit SP1
-Intel i7 CPU 960 @ 3.2
-12 GB de ram
-Nvidia GTX 580
Pour C: Le logiciel est installé sur mon SSD (vertex 4 sata6 160GB) ou il y a windows.
Pour D: (Raid0 de 2 disque dur de 500gb à 7200t) J'ai fait mettre les tmp de adobe ainsi que les fichiers projets.
Pour E: Disque 2To ou se trouve mes fichiers vidéos ou audio.
Alors ou est le problème?
quelqu'un pourrait me dire ou j'ai gaffé ?
Voici les réglages que j'ai fait dans adobe :
[IMG]http://imageshack.us/a/img854/8805/ad01s.jpg[/IMG]
[IMG]http://imageshack.us/a/img826/7163/ad02f.jpg[/IMG]
Merci encore pour votre aide car je trouve ça dommage d'avoir investi dans du matos pour qu'il ne soit pas exploiter à fond.
Eric

Vous avez tenté avec Google Translate ? Sinon, tentez sur des forums spécialisés en vidéo (ou sur le forum Premiere (en anglais))

Similar Messages

  • CPU utilizing 100% memory after cloning

    Hi,
    I did cloning two days before.After that the server utilizing 100% CPU.So that unable to do any work on that instance.Can any one please suggest what is the root cause of the problem ?
    oracle ebs 12.1.3
    database 11.2.0.2
    RHEL 5.8
    Thanks

    Sivamani wrote:
    Hi,
    I did cloning two days before.After that the server utilizing 100% CPU.So that unable to do any work on that instance.Can any one please suggest what is the root cause of the problem ?
    oracle ebs 12.1.3
    database 11.2.0.2
    RHEL 5.8
    ThanksStop the CM only and see if you notice any improvement in the performance.
    Also, please see https://forums.oracle.com/forums/search.jspa?threadID=&q=CPU+AND+High&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • HELP: Premiere Pro CC not using all CPU and RAM during rendering and export

    Hello,
    I am using Premiere Pro CC on a Windows 7. My timeline is quite simple with two videos, one with the movie (mpeg) and the other with the subtitles (avi).
    When I render the sequence in PP or export, the rendering time is way too slow and it only uses around 15-20% of the CPU and 3 GB of RAM.
    My hardware config is :
    - CPU : i7-4770k 3.50Ghz
    - RAM : 8 GB
    - Disk : 2 x 3 TB SATA (no raid)
    RAM is not the bottleneck, neither the disk access.
    I have tried rendering and exporting the same project on an iMac (with an i5 2.7 Ghz and 4 GB RAM and only 1 disk) and the result is 4x faster !!!
    The CPU usage is close to 100% as well as RAM usage.
    So how come PP uses all resources availble on an iMac and not on a Windows 7 ?
    Is there any known bug or software bottleneck on Windows 7 ?
    My machine is brand new and nothing much installed besides Adobe products.
    Any help is very much appreciated.
    Thanks,

    I just rendered out a a 2 minute sequence with about 100 clips in it and Colorista effects on everything to the Vimeo 1080 H264 preset. It took about 5 minutes to render straight from Premiere, it used all the recourses it could, my CPU was running at near %100, same with my ram and GPU, I was happy.
    Then I did another render with Red Giant Denoiser and it now wants to take 30 mins and it is only using about %20 of the recourses available. My problem isn't that its taking longer with Denoiser but that its not using all of my computers CPU and GPU.
    Im rendering at maximum render quality and bit dept to H264 (Im happy to wait the extra time), if I try to use VRB 2 it encodes 1 pass at a time and wants to take up to 40 minutes.
    I would appreciate some advice on this.
    Premiere Pro CC 2013
    2.6 GHz Intel Core i7
    NVIDIA GeForce GT 750M 2048 MB (CUDA GPU enabled in Premiere)
    16 GB 1600 MHz DDR3
    OS X 10.9.4 (13E28)

  • Adobe utilizes my CPU over RAM, this normal?

    So i ill start by saying i have a quad core i7 3.4ghz system with a 2gb Nvidia EVGA Geforce GTX 750ti FTW GPU and 16gb of ram.
    when ever i render a project i have begun to notice that my system is utilizing my cpu over my RAM
    my CPU will be ranging from 90-99% when rendering while my ram is only at 50% tops
    when i have designated 13gb of RAM to adobe and 3gb of ram to everything else.
    is this just how its going to be? or should my adobe be utilizing my ram over my cpu first?

    Rendering/exporting is mostly a CPU process ... RAM is simply a fast in/out temp storage place for data that's partly "cooked" and waiting it's next step of processing ... in the CPU. If it needed more of the RAM, it would use it ... but as it is running up to and above 90% of the actual processing capability, it's not needing more.
    GPU is also not used very much in exporting ... with a few exceptions. So ... exporting is primarily about your CPU, the front-side-bus (fsb) getting data moved from disc to CPU to RAM & back ... and your disc in/out sustained capabilities.
    If  your CPU is nearly maxed, this is as fast as that machine's going to go.
    Neil

  • Where to see CPU and RAM usage in IPAD 1

    Hi:-)
    While i have Apps running , I would like to be able to see CPU and RAM in use..and ideas how/where?
    Thanks

    There are several apps in the app store that can show you cpu and ram usage of your device, e.g. "system info"

  • What is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?

    I currently have a 2011 Mac Mini Server. When using FCP X, what is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?
    Thanks people,
    TZ

    Hi Tom,
    I just wanted to ask you about what you said about the color correction. To be quite honest I'm not sure what the best workflow is, and I haven't gotten my feet wet in multi-cam editing. Basically my work-flow has been.
    1) Import from the camera as optimized media - I found that adding color-correction at the import stage cause a severe hang with my tape-based Canon unit.
    2) Color-correct the imported files before loading any files into a project
    3) Drag files onto the timeline
    4) Click on the color-correction box
    5) Start editing - Usually I have one camera zoomed a little tighter on the singer, one on the whole band, and my iPad or iPhone camera at different angles so I start cutting things according to who is the focus of the moment, add a Ken Burns effect every here and there, Titles, an occassional transition effect.
    6) Add music effects after the looks are taken care of
    7) Export
    Are you recommending clicking on the color-correction box after everything is done?
    Thanks - TZ

  • Export Results-Not Enough Memory (1).  I need HELP with this please.  Using Windows 7 32-bit.  Intel i5 4690K CPU 16GB RAM 120 SSD and 1 TB harddrive.

    Everytime I go to export a photo, I get an error.
      "Export Results:  Not enough memory (1)
    Using Windows 7 32-bit.  Intel i5 4690K CPU 16GB RAM 120 SSD and 1 TB harddrive.

    Even though you have 16gb of ram installed, 32 bit Windows can only use 4gb of it so 12gb is wasted.  This is the reason you are getting not enough memory errors and is a known problem with Lightroom an 32 bit Windows during export.   You need to change to 64 bit Windows.

  • Z77A-gd65A boot error code 15 rebthing i removed all except cpu and ram and oot

    my pc used to work fine yesterday i shut it down and started it today and it kept cycling rebooting at code 15 on debug i changed to bios B and the same thing did clear cmos both ways even removed  the battery the same also removed all except cpu and ram but still the same result please help !

      I have no idea how you possibly could corrupt bios A if you weren't running Live Update or manually attempted to flash. if bios is really corrupted follow: >>Flashing a Corrupted bios when the alternate bios still works<<

  • What causes my instability? CPU? RAM? PSU?

    Hallo community,
    let me start with a short description of my problem:
    I am unable to get my system (see signature for details) working stable in synchronous mode: when both, CPU and RAM, are working at a FSB (or HTT) of 200 MHz, the system crashes randomly with various error messages (mostly memory related). It is possible to reduce the number of crashes by using memory slot 2 or 3 instead of 1, but the system is still unstable. The currently only way to solve this is setting the memory to 166 MHz in the BIOS. It should be mentioned that with the former motherboard (K8X800 PRO 2 from ALBATRON based on VIAs K8T800) everything was fine.
    What i have already tried:
    First of all, i replaced the motherboard with the AN51R from SHUTTLE - no difference, as long as CPU and RAM works with 200 MHz, the system is highly unstable. I tried various RAM sticks -A-DATA, CORSAIR, GEIL and KINGSTON- but also without success.
    What i consider to try:
    I feel unsure. In one of the guides it was recommended to use a PSU that deliveres at least 24A on the 12V rail - my TAGAN deliveres "only" 22A. Since i can solve my problem by reducing the memory frequency, i do not believe that replacing the PSU will help. What remains ist the CPU: i own a CLAWHAMMER stepping and i know well that the newer NEWCASTLE stepping uses a revised memory controller. On the other hand, this CPU did fine while using a different chipset. As i told - i feel unsure.
    Any help is highly welcome.
    Thank you in advance,
    JePe

    One stick (512 mb) in currently slot 3 - since this worked best for me. And no, i did nor ran memtest until now, since ... i do not own a floppy drive . Beside this, i really cant imagine that all memory sticks i tried had the same weaknesses.
    Greetings,
    JePe

  • Dreamweaver : css non utilisé

    Est ce qu'il y a une solution pour supprimer les css non utilisé dans les pages de mon "site" ?
    Plugins ?
    Version Dreamweaver CC 2014

    Oui mais apparement Dreamweaver ne sait pas faire d'analyse sur des Css non utilisé ou même des JS.
    La seul analyse qu'il sait faire c'est vérifier les liens (images…)
    Voilà une fonction qui manque à Dreamweaver et à faire remonter pour une prochaine version
    Sur les forums Adobe US,  j'ai pu constaté que je ne suis pas le seul !
    J'ai aussi trouvé, dans ce même forum, une extension qui permet de faire une analyse complète sur un site via FireFox
    http://www.brothercake.com/dustmeselectors/
    Bonne journée

  • Bonjour, comment puis-je annuler mon abonnement mensuel en ligne et être remboursé du mois non utili

    bonjour, comment puis-je annuler mon abonnement mensuel en ligne et être remboursé du mois non utilisé?

    Contact your regional support by phone to cancel your subscription. There is no refund for "unused months". It's your own fault if you haven't used the software.
    Mylenium

  • CPU and RAM size for database

    How can we see what is the CPU and RAM size for the database?
    <div class="jive-quote">select * from v$version</div>
    BANNER                                                          
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
    PL/SQL Release 10.2.0.5.0 - Production                          
    CORE     10.2.0.5.0     Production                                        
    TNS for HPUX: Version 10.2.0.5.0 - Production                   
    NLSRTL Version 10.2.0.5.0 - Production

    cat /proc/meminfo
    root:     total:      used:      free:           shared:     buffers:     cached:
    Mem:      1055760384     1041887232     13873152     0     100417536      711233536
    Swap:      1077501952      8540160      1068961792
    MemTotal:          1031016 kB     
    MemFree:          13548 kB
    MemShared:          0 kB
    Buffers:          98064 kB
    Cached:               692320 kB
    SwapCached:          2244 kB
    Active:               563112 kB
    Inact_dirty:          309584 kB
    Inact_clean:          79508 kB
    Inact_target:          190440 kB
    HighTotal:          130992 kB
    HighFree:          1876 kB
    LowTotal:          900024 kB
    LowFree:          11672 kB
    SwapTotal:          1052248 kB
    SwapFree:          1043908 kB
    Committed_AS:          332340 kB
    cat /proc/cpuinfo
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 15
    model : 31
    model name : AMD Athlon(tm) 64 Processor 3000+
    stepping : 0
    cpu MHz : 994.927
    cache size : 512 KB
    fpu : yes
    fpu_exception : yes
    cpuid level : 1
    wp : yes
    flags : fpu vme de pse tsc msr pae mce (snipped)
    bogomips : 1956.97
    TLB size : 1024 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 40 bits physical, 48 bits virtual
    power management: ts fid vid ttp

  • MOVED: getting most ffrom my cpu and ram cinfigd in the bios

    This topic has been moved to Overclockers & Modding Corner.
    getting most ffrom my cpu and ram cinfigd in the bios

    You can use CPU-Z to check your settings.  I find it best to just use good ole bios overclocking.  Set ram 1:1(FSB/Dram ratio) and FSB to 200 that that should give you 2200Mhz.

  • Mac Pro - CPU and Ram Utilisation (don't appear to be fully used)

    Hi,
    We've recently purchase and set-up a Mac Pro running OS X 10.4.8 (latest patches), FCP 5.1.2 and don't seem to be getting quite the performance we were expecting. (Caveat - I'm a IT tech not a video specialist so apologies if I get something wrong).
    A few background details
    Our configuration is as follows:
    Mac Pro Dual Proc/Dual Core 3.0GHz intel
    5GB Ram configured as:
    Riser A Dimm 1 - 1GB
    Riser A Dimm 2 - 1GB
    Riser B Dimm 1 - 1GB
    Riser B Dimm 2 - 1GB
    Riser A Dimm 3 - 512MB
    Riser A Dimm 4 - 512MB
    (think AFAIK this should be the best config for the ram we have?)
    (Slot 1 (in x16 mode)) ATI Radeon X1900 512MB graphics
    500GB Internal SATA HD
    (Slot 3(in x4mode)) FC 2 GB/s Apple card to XRAID (7x500GB RAID 5 with one spare)
    (Slot 4(in x4 mode))Blackmagic Decklink HD Pro
    Xraid seems fine performance wise - Blackmagic disk test shows 145MB/s Read about 100MB/s write.
    Anyhow we have been doing some test rendering but don't seem to get the CPU utilisation above 150% (out off 400%) and also note the RAM utilisation also seems a little on the low side (not using more than 200MB 'Real memory' (as noted in Activity monitor) and any more than 1.2GB 'virtual Memory' despite having lots available (nothing else running)).
    The (DV PAL) file we are rendering is simple consisting of over an 1 hour of Sat TV footage (bout 15GB worth just to test) captured via DV to which we applied some plugin effects (Chroma key, Light Ray and Scrub) once again just to test perfomance.
    Have checked all the settings I can think of -i.e. system settings > Memory and Cache is set to Application = 100% (2560MB) and Still Cache = 20% (482MB). Scratch is Xraid etc. but can't seem to find anything obvious that could bee affecting this. (Also as an aside does anyone know if FCP limited to 50% of total sys memory as it appears to be (looking at the app = 100% = 2580MB) as it seems we could utilise more (in generall)).
    Is this situation be normal? - bit hard to benchmark as our other machines are still 10.3.9 / G5 based with FCP 4.x. The Video tech seems to think its not as big a difference from his Dual 2.0Ghz G5 2GB Ram (3 years old) as he thought it would be (apologies for his vagueness)
    Anything I can look to change/improve - I am concerned mainly about the lack of utilisation? Everything is freshly built straight after delivery
    thanks - Pete
    Mac Pro DP 3.0Ghz     Mac OS X (10.4.8)

    It probably is mostly a 32-bit versus 64-bit thing in that the big boys like Final Cut Pro, Photoshop, After Effects, etc. won't "see" more than just under 4 gigs of RAM. So they won't use memory as efficiently. A nice side effect to this is that you can multitask well with several of these apps open at once if you have a around 8 gigs of RAM.
    Also DV (NTSC or PAL) isn't going to tax the system much as far as bandwidth so your maximum RAM usage probably won't be as high.
    Compressor will push the CPUs harder, as will using some other codecs that are more sophisticated than DV.
    Also, I'd think that the new Intels are still new enough that a lot of software might not be fully optimized yet. And in general the G5 PPC machines have a really fat memory to processor bus so that you aren't necessarily going to see a radical speed increase with these new Intel motherboards for some tasks.
    If you have any CPU-based 3D apps like Cinema 4D or similar I'd try rendering tests to benchmark your CPU usage. 3D isn't as RAM intensive but it will push the four cores in my Quad G5 nicely. I'd expect the new Intel Quads to outrun my PPC Quad.

  • 10.5.3 update: Finder pegs CPU at 100% and RAM at almost 100%

    Ever since my update to 10.5.3 Finder goes nuts causing the CPU to max out and RAM usage to nearly max out, sometimes for hours at a time. I have searched high and low on the discussion boards and there is some chat but no fixes for my situation. This happens right after login with no apps other than background apps running. This never happened with Tiger and only happened for very short periods of time with Leopard prior to the 10.5.3 update. Disabling Finder is an option but its like cutting your arm off because it hurts for a few hours a day and no doctor can cure it. Not a good option.

    Have you tried reinstalling using the [10.5.3 combo update|http://support.apple.com/kb/index?page=search&src=support_site.home&q=10 .5.3%20combo%20updater]?
    Sometimes doing this will cure anomalies. You might also want to reset your SMU by shutting the computer down, pulling all the peripherals off and then disconnecting the power cord. Wait 15 seconds, reconnect the cord, then turn the computer on again.
    Please post back with results,

Maybe you are looking for