Utilisation d'un .swf dans un un nouveau .fla (Flash CS5)

Bonjour,
J'espère que quelqu'un pourra me répondre.
Ajouter un fichier .swf dans une page Dreamweaver OK, Imorter un fichier vidéo dans un document Flash OK.
Mais Importer un fichier .swf dans un document Flash CS5 KO . J'ai essayé d'importer dans la bibliothèque ou dans le scénario et dans les deux on peut importer le fichier .swf mais lorsque j'en importe un que ce soit dans la bibliothèque ou dans le scenario, on ne peut pas le lire. Tester l'animation ne donne pas de résultat non plus.
Comment faut-il faire pour utiliser correctement l'importation?
Andres

Bonjour Hans,
D'abord inutile de t'excuser, je suis déjà content que tu essayes de m'apporter ton aide. Je suis aussi perplexe que toi mais peut être pas tout à fait pour les mêmes raisons.
D'abord, comme je l'ai dit le fichier swf lui m^me s'ouvre parfaitement dans media player ou dans une page html. En ce qui concerne l'importation, avec certaines anims .swf très simples je n'ai aucuin problème. Par contre avec d'autres à peine plus compliquées (quelques calques et des interpolations de mouvement) cela ne marche pas). J'ai le m^me problème avec des fichiers plus complexes créés avec bannerzest par ex.
Pour t'éviter des pertes de temps dues à mon incompétance, j'ai refait le fichier banner.swf dont l'anim fonctionne parfaitement et j'ai repris tout le processus avec exactement le m^me résultat>>> pas d'animation visible lors de l'importation dans un fichier flash (actionscript 3)
Je te joins un nouveau fichier pdf avec copies d'écran de ce que je fais et du résultat obtenu aussi bien par importation dans la scène que par importation dans la bibliothèque. Je te joins égalment le fichier banner.swf et les deux fichiers Fla de test.
Si cela ne te permet toujours pas de voir où est mon problème, je peux essayer de faire un fichier vidéo.
NB. Dernier fichier joint sur autre réponse si c'est possible.
Encore merci pour ton aide et en espérant que cette fois je te montre plus clairement ce qu'et mon problème. Autrement il ne rester aque la solution vidéo.
Amicalment,
Andres

Similar Messages

Adobe Flash CS5 generating SWF file size more then fla file?

Hi,
I have developed a video player in adobe flash cs4 and used all vector arts but when I open this fla file in Adobe Flash CS5 and published it, the swf file size more then fla file.
Please see the details below -
Adobe Flash CS4 -
Index.fla file size: 523 KB
Index.swf file size: 55 KB
Adobe Flash CS5 (Same file when open in CS5 and published)
Index.fla file size: 183 KB
Index.swf file size: 215 KB
Please suggest.
Thanks & regards
Sunil Kumar

Not working!
Thanks
Sunil Kumar

Swf dans PDF Comment faire pour que le swf ne ce redimensionne pas ?

Bonjour
Je travail sur la version CS5 de InDesign et voilà mon souci.
Quand on import un swf dans le fichier et qu'on export en PDF interactif le swf fonctionne correctement, bien sûr, sauf avec un gros problème de redimensionement du swf qui me semble incontrolable, à moins que qu'un génie d'ici ne nous explique ce qui se passe et comment y remédier.
Comment créer un fichier PDF a la bonne taille (du swf) ?
Comment faire que le swf ne se redimensionne pas ?
J'ai cherché sur plusieurs forum ou documentation et je n'ai rien trouvé qui reponde à mes questions.
Bien à vous

Bonjour,
Je crois que c'est un bug connu.
L'autre possibilité pour contourner ce problème est d'utiliser Acrobat. Ouvre le document PDF qui contient TOUS les éléments SAUF le SWF et ajoute le SWF dans Acrobat.

Lorsque je branche mon Iphone sur mon mac, ça me met qu'il faut une version de Itunes " 10.6.3" alors que j'ai télécharger la dernière version d'Itunes, que faut-il que je fasse pour que mon Iphone apparaisse dans Itunes de nouveau?

Lorsque je branche mon Iphone sur mon mac, ça me met qu'il faut une version de Itunes " 10.6.3" alors que j'ai télécharger la dernière version d'Itunes, que faut-il que je fasse pour que mon Iphone apparaisse dans Itunes de nouveau?

Bonjour, pour ne pas réinventer la roue, avez-vous un lien des documents d'aide déjà essayés?
celui-ci? http://helpx.adobe.com/fr/premiere-elements/kb/updated-installation-instructions-premiere- elements.html
Pour télécharger la version démo, un lien se trouve ici, il faut suivre exactement les instructions pour obtenir le cookie de téléchargement: http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Vous avez donc le programme PE 10 installer fix?

How to export swf file in different versions of flash like (6,7,8,9) ?

Hi,
    System Specification :
    -XP with SP3
    -MS Office 2003
    -Flash V.10
    -Xcelsius Engage 2008 ( 5.3.0.0 )
    -Xcelsius Build number 12,3,0,670
   When I export output in swf format then xcelsius generating swf file of version 9. I want to export swf file in different versions of flash like (6,7,8,9) . I tried to install older versions of flash to do this but I am not able to open xcelsius in older version. I am getting error saying 'Install latest flash player'.
Is there any way to export swf files in different versions?
Is this build is compatible with only flash 10?
Thanks,
Ganesh

Xcelsius only support Flash version from 9 on. There is no way to export to 6,7 or 8.

Flash CS5.5[Publish Settings]: How to include custom Metadata tags in swf?

In Flash CS5, the 'Publish Settings' for the fla had an 'Export SWC' checkbox that took care of that.
The option is missing. Why was it removed and how can that be done in 5.5?

Thanks sinious, but, it doesn't work.
Let me elaborate on what I want to do:
I'm trying to create a swf in Flash CS5.5, that's using a flex library (swc) that relies on Metadata tags (anotations).
I need to use the metadata tags in my as3 code (in the fla), and They need to be compiled into the swf (by Flash CS5.5 compiler...).
Although, when I load that swf, the metadata tags aren't compiled into it (I'm using describeType to check if tags are available in the swf).
In flex, I would use the '-kepp-as3-metadata+=' compiler setting to do that, in Flash CS4 & CS5 I used the 'Export SWC' in the publish settings, but that's removed (WHY???).
Checking XMP Metadata didn't change that, the tags are still not included in the compiled swf.
Anyone?

Importing a flash Catalyst .swf file in Flash CS5 ?

Hi,
I found Flash Catalyst by luck while browsing the Adobe website and downloading the Flash CS5 trial...
One simple question....
Can I import a .swf file created in Flash Catalyst into a Flash CS5 .fla as an element ?
I created a scrolling text attached to a custom made scrolling bar in Flash Catalyst, and I would now like to use it in my Flash CS5 project...
Well, I will be waiting for your responses...
Thanks in advance for your help !
Gilbert Gour

Unfortunately you can't import an SWF from Flash Catalyst into Flash CS5. Flash Catalyst uses the Flex Framework for building the its SWF. Flash CS5 does not use the Flex Framework and doesn't know what to do with that kind of file. You can load an SWF from Flash CS5 into your Flash Catalyst project, though.

Why an imported SWF created in Flash CS5 doesn't works fine?

perhaps I am not lucky. I find no answer.. perhaps im a noob (daaaah) please if you can help it would be appreciated!
I'm new in flash and flash catalyst.. but i'm not bad at all hehe. After publishing a swf from flash CS5 (that works perfect when i preview it) i want to import it in flash catalyst...
... i click on import swf and i select my swf. When i execute the project (CTRL+ENTER) in flash catalyst the motion tweens created in Adobe Flash doesn't start
Even if it works well when i run the SWF from desktop or in Adobe Flash directly

A detail that could help you guys..
I used FlashEFF2 in Adobe Flash CS5 (as a Text Effect (it's awesome)) and this effect only starts and works fine in Flash Catalyst. The motions tweens created in Adobe Flash CS5 doesn't starts in Flash Catalyst
Thanks to read it!
Max

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?

Can I import binary in Flash CS5 and export swf, without AS code likes "Embed" ?
I know I can use AS code,likes "[Embed]" metadata to embed binary in swf. But , how can I do that in Flash CS5 ?

Have a look at this: http://stackoverflow.com/questions/7816231/how-to-use-as3-to-load-binary-data-from-web-ser ver

Using a swf generated by Flex from a Flash component

I know you can include and control a swf generated by Flash
within a Flex component. But can you do the inverse? Can you use a
swf generated by Flex within a Flash project/component?
We plan to develop a "core" module that would be used in a
lot of other Flash and Flex components we'll develop in the future.
This core would be a package of classes that could be easily
re-used by the components. There would be nothing visual in it,
only standard classes.
Even if this core would not contain any visual components, we
would like to develop it using Flex since we prefere Flex Builder
to the Flash editor to code and debug.
But I'm not sure if:
1) A core module like this, developped in Flex, could be used
by our Flash components or only by other Flex components?
2) If we use Flex to generated this core, will the resulting
.swf be bigger than if we would have used Flash to develop it?
Since there will be no Flex visual components in it, maybe it will
be as small? Is there a compiler parameter to tell Flex to only
include the minimum things possible in the generated .swf?
Any help or link about this would be really appreciated!
Thanks you in advance!
P.S. I apologize to those aware that this message was also
posted on another Flex related forum, but I received no reply on
it!

try this. for me it has worked.
import flash.net.URLRequest;
import flash.utils.Timer;
var loader:Loader = new Loader();
var timer:Timer;
var myclip:MovieClip;
//load the Flex Component
loader.load(new URLRequest("IS.swf"));
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
loaderDone);
addChild(loader);
function loaderDone(e:Event) {
timer = new Timer(100);
timer.addEventListener(TimerEvent.TIMER, handleTimer)
timer.start();
function handleTimer(event:TimerEvent):void {
//cast the loader.content into MovieClip to access
currentFrame.
myclip = loader.content as MovieClip;
if (myclip.currentFrame == 2)
however, i need to access properties of IS.mxml..
any data member would work..
or if i could dispatch an event in IS.mxml and catch it in
flash through IS.swf, it would work.
Pls somebody suggest.

Loading child SWFs with TLF content (from Flash CS5.5) generates reference errors in FB4.6

I am currently producing e-learning content with our custom AS3-Framework.
We normally create content files in Flash CS5.5 with dynamic text fields, which are set at runtime from our Framework (AS3 framework in FB4.6).
Now we are in the progress of language versioning, and since one of the languages is Arabic we are changing the dynamic text fields to TLF fields.
Then all my problems started.
In Flash I have chosen to include the TLF engine and to export in frame 2.
(see to: http://helpx.adobe.com/flash/kb/loading-child-swfs-tlf-content.html )
I get this error:
VerifyError: Error #1053: Illegal override of getEventMirror in flashx.textLayout.elements.FlowLeafElement.
at flash.display::MovieClip/gotoAndPlay()
I guess it is because our framework wants to gotoAndPlay before the TLF engine has been loaded.
Can this be it?
Any good suggestions on how to handle loading child SWFs with TLF content.

Please refere to the following articles .. you may find some help.
http://www.stevensacks.net/2010/05/28/flash-cs5-tlf-engine-causes-errors-with-loaded-swfs/
http://www.adobe.com/devnet/flash/articles/preloading-tlf-rsl.html
I also faced similar problem and posted a question at the following link, but, I still couldn't find the solution.
http://forums.adobe.com/message/4367968#4367968

Importing anything (swf, swc, etc) compiled from Flash CS5.5 into FB 4.5 throws Errors

I'm using FB 4.5 with sdk 4.1.0.16076.
I've tried importing an swc file, using the "convert symbol to flex component" command and it throws a VerifyError: Error #1053: Illegal override.
I've tried just compiling an swf and embedding it in a Flex compoent, again i get a VerifyError: Error #1053: Illegal override.
I've tried changing a number of compile settings in Flash CS5.5 but with no luck.
Does anyone have any ideas how to fix this error?

with the swf it is: Illegal override of createTextLine in flashx.textLayout.compose.ComposeState.
the swc is Illegal override of FTETextFieldHostFormat in FTETextField.as$134.FTETextFieldHostFormat.
these errors seem arbitrary, since the first time i loaded an swc i got a different Illegal override error regarding some kind of CSS object that i can't remember.
i have read other threads that indicate this problem may occur when compiling objects using different SDKs in the same project. Does Flash CS5.5 compiled objects need to be imported to the 4.5 sdk maybe? (i'm using sdk 4.1).

Flash CS5 SWF File not functioning in Captivate 5

Hi,
I have an Interactive SWF File created in Flash CS5 that has an Intro screen with a button to continue etc and it opens to a presentation with several buttons, and works fine.
I bring the SWF file into Captivate 5. It shows fine in the Slide, but when I test it or publish it, two things happen.
It stops after a second and disappears. I have set it to play for the duration of the animation, but it makes no difference.
If I extend the timeline out to several minutes then it will stay, but although the Start button works, nothing happens, it just sits there.
how do I get the Slide to stop and stay so that the user can take their time interacting with the animation. ( I dont how long someone will spend on the presentation)?
Why doesn't the interactivity actually work?
Cheers

Take a look at this other thread: http://forums.adobe.com/message/3606274#3606274
It may explain the reason for the issue and what you can do about it.

Flash cs5 swf not running properly in captivate 5

Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
Maedhbh

See http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.

Flash CS5.5 publishing incomplete SWF

Hello,
I have an FLA that has 20 scenes in it. When I publish it, the resulting SWF plays fine up to scene 16. At that point, I get the streaming audio, but the animation just stops. The scenes after 16 are empty.
This is a simple, voice narrated movie that is linear. The buttons at the bottom are AS2 pause/play/nextscene/prevscene. It works fine till I get to scene 16 and that's where it seems like it's just incomplete.
I noticed when it's publishing that the progress bar seems to get a bit over halfway and then the publishing dialog just disappears as if it's finished. It doesn't move the progress bar all the way to 100%.
If I do a test scene each one of those scenes publishes fine and plays fine inside Flash CS5.5. This only happens when I publish the whole thing. If I copy the timeline of scene 16 and paste it into a new movie, that single scene also publishes and plays fine. Again, it's only when it is publishing all 20 scenes.
Anyone run into this?
I have a Mac Pro with 10 gigs RAM and OS X Lion.
Thanks!
Scot

OK, I found on another thread that Flash has a 16,000 frame limit in any SWF. That was my problem.

Utilisation d'un .swf dans un un nouveau .fla (Flash CS5)

Similar Messages

Maybe you are looking for