Utilities - Business Functions for SAP Customer Relationship Management - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
Best Regards,
Sigrid

Similar Messages

Intellectual Property Management - Business Functions for SAP Customer Relationship Management - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
Best Regards,
Sigrid

Application Component - Enterprise Services in SAP Customer Relationship Management - SAP Library

To add a comment, please log in or register on the top of this page and choose Reply. Please write your comment in English.
You can also go back to the SAP help page.

Hi,
It is a CRM Addon: Desktop Connection for SAP CRM – SAP Help Portal Page
Best Regards,
Sigrid

Active business functions for IS-OIL Downstream

Dear all,
I have system NW701/ECC6, and upgrade EhP4.
Now I want to active business functions for Downstream, in tcode swf5, I select Business functions set OIL&GAS, I found a lot of business functions:
BUSINESS_FUNCTION_BASIS_COM               Business Function Basis (COM)
COMMODITY_MGMT_&_BULK_LOGISTIC       Commodity Management and Bulk Logistics
COMM_MGMT&BULK_LOG_1                         Commodity Management and Bulk Transports
ISR_RETAILSYSTEM                                       Other Enhancements for SAP Retail
LOG_COMMODITY_TRANSPORT_MGMT_4   Commodity Management and Bulk Transports 2
OIL_PRODUCTION                                           Upstream Production Management
OIL_REVENUE_ACCOUNTING                         Upstream Revenue Accounting
REMOTE_LOGISTICS_MANAGEMENT             Remote Logistics Management
Can any one help me, what business functions do I need to active for Downstream ?
Thanks all,
Thanh.

I create customer message ask SAP and these are downstream functions need to active:
1. COMMODITY_MGMT_&_BULK_LOGISTIC (ECC 6.0 )
2. BUSINESS_FUNCTION_BASIS_COM (EhP3)
3. COMM_MGMT&BULK_LOG_1 (EhP3)
4. LOG_COMMODITY_TRANSPORT_MGMT_4 (EhP4)
Thanh.

How to find Exits in CRM (Customer Relationship Management)

How do we find Exits in CRM ( Customer Relationship Management)

Hi,
Try these links below
http://www.sap-img.com/ab038.htm
http://abapcode.blogspot.com/2007/06/program-to-get-user-exit-for-any.html
Regards,
Tush

Function module to give all partner functions for given customer

Can anyone tell me function module name which gives all partner functions for a customer. For ex if we give customer number and sales area then it should give the list of all partner functions of this customer.
I know 'CUSTOMER_PARTNERFS_GET' function module. But I want other than this.

Hi,
U can join VBAK and VBPA table and get the parrtners of the customer..
Regards,
Nagaraj

Adding Inventory functionality to a custom Order Management Menu

We have custom menus set up to limit access for users. We currently have a user that needs the 'Move Order' functionality from the Inventory module. This user does not have access to any inventory functionality. I would like to add the 'Move Order' submenu to a custom order management menu she does have access to. Would this work as anticiipated or would this introduce issues in one or both modules? Thanks.

Hi,
There should be no issue if you add the proper submenu. You may also need to add some functions which could be relevant to this submenu for accessing it properly from the custom responsibility.
I would suggest you try this on test instance first, then move it to your production environment.
Regards,
Hussein

Business Functions for EHP 4 and EHP 5

Hi Friends,
We are planning to implement LSO, ECM, Travel, PMS and E Recruitment.
What are all the business functions available in EHP4 and EHP5 for these modules.
Please help me with your inputs.
Thanks,
Charle

Hello Charle,
Following are the business functions available :
HCM_ECM_CI_1     For ECM EHp4
HCM_ECM_CI_2     For ECM EHp5
HCM_ERC_CI_2      For EREC EHp4
HCM_ERC_CI_3     FOR EREC EHP4
HCM_ERC_CI_4       For EREC EHP5
HCM_ERC_SES_1   For Search in EREC
HCM_OSA_CI_1     For Performance Managemt EHP4
HCM_OSA_CI_2     For Performance Managemt EHP5
HCM_LSO_CI_2   For LSO EHP4
HCM_LSO_CI_3 For LSO EHP5
These are BF, which you are looking for, you can get more information on help.sap.com
Best Regards,
Deepak.

Business Functions For Empty and DSD

Hi
We have installed ECC 6 at one of our client and the client's business is related to Beverage Industry and in order to use the functionalities of Empties and DSD we want to be sure about ECC Business Functions available for the Beverage Industry. Kindly reply with the related Business Functions available and need to be activated for Empties and DSD.
Regards,

Hello Charle,
Following are the business functions available :
HCM_ECM_CI_1     For ECM EHp4
HCM_ECM_CI_2     For ECM EHp5
HCM_ERC_CI_2      For EREC EHp4
HCM_ERC_CI_3     FOR EREC EHP4
HCM_ERC_CI_4       For EREC EHP5
HCM_ERC_SES_1   For Search in EREC
HCM_OSA_CI_1     For Performance Managemt EHP4
HCM_OSA_CI_2     For Performance Managemt EHP5
HCM_LSO_CI_2   For LSO EHP4
HCM_LSO_CI_3 For LSO EHP5
These are BF, which you are looking for, you can get more information on help.sap.com
Best Regards,
Deepak.

Folder path for developing custom UI in SAP OEE

Hi,
recently I was developing in a scenario where I need to add a custom UI in OEE Dashboard. For that I followed the SAP How to guide for Custom UI. As per the guide I developed the view.js file controller.js file and then set them in activity configuration. It was stated in the how to doc that we have to put upto the name of the view page not the extension. Interestingly I found one thing here.
OEE always expects a folder path for that view file is such a way http://<host>:<port>/<Project name>/Web/WebContent/customActivity/<View page>.
Main problem to use that is, we can't add any specific folder in between any of the folder and even we can't change the name of the folder. I have tried with "customactivity", it didn't work.
I think this kind of limitation anyone can't expect while developing. I just post this here to explore that if I am doing anything wrong or that is a issue. Another point is in the how to doc it is not mentioned anywhere.
Thanks and Regards,
Suman

Hi All,
This is for everyone's update.
I have raised this point to the SAP, they have sent the confirmation that they have wrote their logic in such a way, so we have to mention the same path while developing any custom UI for SAP OEE. But as per my understanding it is kind of limitation they are giving.
So the standard path to keep the custom UI code for any SAP OEE Custom UI is :
http://<host>:<port>/<Project name>/Web/WebContent/customActivity/<View page>
Regards,
Suman

Business Function for Business Context

Dear All,
I have a technical question regarding business function FIN_SSC_AIC_1.
This Business Function is activated on the ERP side, my doubt is if this business function is not activated can we use business context on the service request to add a FI document from the ERP?
Many Thanks and Best Regards,
João Graça

You should decide the flow in your action class only based on the configuration parameters of struts-config.xml

SAP business function for X-docking.

Can anyone tell me what we have to install to get the X-docking function? I know it is in Extension 2.00 for WM, but they are asking me now what the BF is for that.
Extension 2.00 consists of YM, TRM and X-Docking.
I did my best and came this far. The rest is too technical for me.
Any help will be appreciated.
Thanks in advance.
Frank Jonker
Edited by: Frank Jonker on Oct 10, 2011 8:19 AM

cross docking means based on the requirement of crertain material the good receipt is directly moved to good issue area insted of first moving it into the storage type where its usually placed
for example: You have customer requirement for Material x1 for whcih you have created a Sales order/delivery and probably a TO for picking.
Now you have posted GR for the PO for material X1 so now insted of moving the material to storage type lets say high rack you will rather move the stock to a storage type known as XCD or cross docking from where the goods will be picked for the sales order to supply to customer.
So it benfits you in a way that the extra efforts of moving the material to warehouse and then moving it to good issue area.
the case i explained is done in 2 steps but there is an option of 1 steps as well where in steps are furthere reduced.

Variants functionality for a custom made report

Hello everybody,
i want to integrate the variant functionality we all know from reports in a custom made report (Dynpro). Is there any kinda generic functionality available you can hook up with? Like FMs or something?
best regards,
Markus

Hello,
maybe i should start from the very beginning. I am developing an application/report which has besides standard input fields a table (editable Grid Control) as selection fields.
I started off using the selection-screen functionality and integrated the Grid Control as a subscreen. Working great. But as it come to developing the functionaility "variant saving" i went into a problem. The standard input field were covered by the SAP standard functionalities, but not the table (grid control).
What i managed to implement using the possibility of custom code at the standard events AT SELECTION-SCREEN and AT SELECTION-SCREEN OUTPUT was when you click on the save button in a report to save my table content in a own database table with the link to the name of the standard variant. (Systemfield VARI hold the data). I even was able to load my saved table data, when loading a variant. This worked only on the first run (event initialization), as clicking on the load variant button in a report does NOT give me any return-code, like pressing the save button. It just raises the event PBO, as does pressing the enter button. So my problem is, i do not have the info at runtime, whether someone has pressed the load variant button and selected a variant or whether someone just pressed the return key, both do invoke PBO and i cant tell the difference.
So i had the idea of instead of using a report, developing a own dynpro application (Module pool).
best regards,
Markus

BUSINESS RULES FOR Vendor, Customer & PRODUCT

Hi,
Can any one help me to provide Business Rules(Validation Rules) of Vendor, Customer & Product domain to be considered in integrating with other technologies.
Thanks & Best Regards,
Giri

Hi Joseph,
First tell me how you want to maintain Inventory size wise?? If it is your A is Length, B is Width and C is your Height and you are not maintaining size wise stock then use Length,Width and Height which is in Item master here you can set fix values and activate same columns in document and you can change it in document. But in this case you cannot maintain size wise stock
If you are maintaining stock size wise then you have to create new item code every time.
You cannot use BP catalog number for this.
Thanks
Sachin

A business case for billing customer for asset use

One of my clients has a equipment which he hires it out for customers . Based on its usage (like if customers uses it for for more than some quantity ) then he wants to bill customer automatically . He says while service confirmation if quantity is of usage is more than some X unit , then automatic billing is to be triggered else no billing .
For equipment maintenance he wants PR to be created automatically from service order .After vendor invoicing , at service confirmation he wants to bill the customer with vendor invoice amount .
I am aware of PM order process , but can any one pl suggest step by step solution for the scenario ?
Thanks in advance
This is a duplicate [thread|http://forums.sdn.sap.com/thread.jspa?threadID=2084697&tstart=0]
Edited by: Paul Meehan on Nov 23, 2011 4:45 PM

regarding the selection of the servers based on the content requested, the current CSM is limited to match only 6 - 10 host name while the CSS has no limitation except the size of the config.
The only protocol that can be loadbalanced based on content - so layer 5-7 is HTTP and RTSP.
IF your citrix application makes use of these protocols, you can do L5/7 content rules.
My favorite between CSS and CSM is the CSM because of its ability to link a vserver/content rule to a vlan and because there is no such thing as garbage collection which is annoying on the CSS with long lasting flows.
Regards,
Gilles.

Utilities - Business Functions for SAP Customer Relationship Management - SAP Library

Similar Messages

Maybe you are looking for