Utility can't 'see' any airports

Hello
I am online wirelessly, connected via my Airport Extreme. I also have an Express unit for printing and playing music through.
The problem is that my Powerbook can't print or play music to these units (even though I can connect to the internet). When I use Airport Utility to scan for the units, it can't 'see' them and keeps asking me to re-scan. I have downloaded and reinstalled Airport Utility, but no joy.
The strange thing is that other Mac's in our household can connect without problem, so I assume the issue lies with my Mac.
Does anyone have any ideas as to how I can fix this? Any .plist files I should delete?
Many thanks in advance!

Update - it seems another Mac on my network was experiencing the same issues last night... but it's fine today.
Airport Utility on my Powerbook remains unable to see either the Extreme or Express.

Similar Messages

Network works fine but Airport Utility can't see the Airport

If someone knows of an earlier discussion on this I'd be grateful for a pointer. My Airport Extreme network has been working fine, syncing with Apple TV, accessing the Internet, etc, but The AirPort Utility can't find it! I discovered this when I had trouble printing and started up the Utility to see if there was something I could do to fix it. The utility can't find it but the network is working fine. However I do need to connect a printer to it.
Any advise on what I can do?

iFelix wrote:
I know this may sound obvious and silly, but are you actually connected to your Airport wireless network and not a neighbouring network?
I thought of that myself and there are at least four networks around my house (three unprotected!) but no, I am connected to the AirPort network!
I'll try one other thing before I do a hard reset though. A week or two back I'd tried to connect an Airport Express manually by creating a WDS. Never got that to work and that may be a problem. I notice that if I do a soft reset the AirPort Extreme become visible in the Utility for a few minutes. I'll go th manual setup and see if I can't delete that WDS...

Airport Utility can't see the airport, nor are shares visible (Why is there no very extensive 'cookbook' on troubleshooting Airport Extremes?)

For quite a while my MBP (10.5.8) cannot see the Airport Extreme 802.11n (AE) (2nd ed) anymore when I start Airport Utility (AU) (v5.5.3). My solution was to lower security settings of the MBP to 'accept all incoming connections', knowing that this was not a nice solution. Normally I had selected 'acces for specific services and programs' (the lowest option - my AE differs in language). In the past I denied access for requests that regularly came from mDNSresponder (etc), as I could not easily find out how necessary they were. I am not sure whether Bonjour is running; I try to stick to TCP/IP (without Netbios); the same might be the case with other obscure network services...
Then I added another network drive (WD Mybooklive) that works based on shares. The installation program worked fine, I was able to set up the drive for Timemachine backups and -in the proces of upgrading to Snow leopard (I always stay one OS version behind)- my MP3 collection could be read from another drive that was connected to the AE.
I am not sure what exactly lead to the loss, but now I can not see the shares anymore in the finder. Unless I select 'connect to server' (Cmd-K) and fill in afp://ip-adres. I had some trouble with the MBP-drive and Disk Utily could not fix it in multi-user mode. Applejack-auto in single user mode finished after some repairs (catalog file and catalog hierarchy errors), but I doubt that causes the trouble.
In all cases, internetting and accessing the connected drive was no problem.
The funny thing is, my Mac Mini (10.5.8) however can see the AE with Airport Utility (different version) fine. Somehow I get the idea that the networkstack of my MBP has been messed up, but I don't know what it should be, nor how I could check it, or how to repair the stack. But maybe it is not the stack at all.
Right now, I've just reset the AE by holding the reset button for about 10 s. The name has returned to 'Base Station xx', which is visible in AU, but when I click on another button ('manual configuration' or 'continue'), first the message "Are you sure you want to connect to another wireless network?". Finally no connection appears and the error 'AU cannot find your Airport' shows up (while the Base Station is visible in the left column) - or does not show up when I refuse to switch to another network.
So, who can help me to reconnect to the Airport Extreme and/or repair the network stack?

WDS is a difficult setup for many users because it is so easy to make a mistake (while swearing that you are not).
Apple's instructions for WDS are here:
http://support.apple.com/kb/HT4262
I still think the instructions provided by Tesserax are the best available:
http://discussions.apple.com/thread.jspa?threadID=2422028&tstart=0
I can't add any more to this other than to say that long ago when I used WDS, I would swear that I had all the MAC addresses entered correctly, etc and would still have problems. So, I ask my wife to watch me and she immediately catches something like I entered a "l" (letter L) instead of a number "1", or a "O" (letter O) instead of a "0" (number zero).
Finally, there's always the possibility of device that is not holding settings...a defective device.
Hopefully, Tesserax will have some additional thoughts.

Airport Utility can't "see" base stations after Leopard 10.5.4

After upgrading to Leopard 10.5.4, Airport Utility can't "see" Airport Extreme UFO version and Airport Expresses. But the Expresses are glowing green, so I assume they're working. But if they can't be "seen" when scanned by Airport Utility, they can't be added as speaker options to iTunes.
Have unplugged and re-plugged in power to Airport Extreme and Expresses.
Oddly enough, at one point the sound through my eXpresses would kick in for five seconds and then disconnect for a minute, then play for five, then disconnect for a minute.
This same thing happened when I switched to Leopard.
Any solutions?

Well what do you know...after a week, it just magically decides to work, without even using Airport Utility.
Boy are these Airports touchy....and unreliable.
I still want to know: What makes these things drop in and out???

Airport Utility can't see Airport Express Device

I tried to print some documents and I received a message telling me the printer is not ready or may not exists, so I launch the Airport Utility to see what is going on and there is no Airport Express just my Time Capsule.
I already reset the airport express to factory settings and everything goes ok until the green light shows but the airport utility can't see it.
Any help will be appreciate
thanks
Dan
I already tried connecting the Airport Express to my computer with an ethernet cable

Connect an Ethernet cable between the wall jack and the WAN (circle of dots) port on the AirPort Express. Connect a second cable between the LAN (opposing arrows) port on the Express to your computer.
You should now be able to access the Express using the AirPort Utility to configure the Express as a WAP.

AirPort Utility can't see Extreme

Airport Utility can't see Extreme
I have reset the extreme, reboot the iMac, and while I have an internet connection, the AirPort Utility can the the extreme.
Light is flashing Amber.
AirPort Utility is 5.3.2

SoCal Web Developer wrote:
click on the AirPort icon (of your Mac) on the upper menu. See if the Extreme >> network shows up there. If so, log into that network...
SoCal Web Developer wrote:
So following your instructions I, disconnected everything, powered it up, and from the Airport icon I could see other wireless networks and join them.
Next I created a new network with the Extreme, and join that one.
I see nothing in his instructions about 'creating a new network'. Instead, I see the words: See if the *Extreme network* shows up there. If so, log into *that network*...
SoCal Web Developer wrote:
If that does not work, get an ethernet cable and connect the
Extreme to your computer.
SoCal Web Developer wrote:
I originally had it hard wired to the iMac and could not see it with AU.
Connect Mac to Ethernet LAN port on the AEBS. Make sure your Mac has IPv6 turned on (under System Preferences|Network|Advanced|TCPIP|Configure IPv6=Automatically). Open the Airport Utility.
If you still don't see the Airport, open a terminal windows and type:
mdns -B airport.tcp
If you get a response, look for something under the "instance name" column. Take that name and type (replacing the name you got above with 'thatname' below):
mdns -L thatname airport.tcp local.
and copy the result and post it here.
If you don't get a response from the first command, enter:
ifconfig
and copy the result and post it here.

Connected to TC but Airport Utility can't see it

My TC arrived today and it is all setup. I just noticed that, even though I am connected to it wirelessly, when I run the Airport Utility, it says it cannot see any Airport.
Has anyone else seen this? Any suggestions?

I had the same issue and Tech Support helped me resolve it. First, they had me connect an Ethernet cable between my iMac and Time Capsule. Apparently, setup is especially sensitive to wireless interference. Then they had me turn off AirPort (click on the pie-shaped icon at the top right next to the time). I went through the setup process and established a new network. At the end of the setup, Time Capsule restarts and the flashing amber light turns solid green. Then I turned on AirPort and opened Time Machine and my Time Capsule was finally there. Then I disconnected the Ethernet cable and my wireless connection is now working. I hope this helps!
PS: Support recommended doing the very first backup via Ethernet because it's faster than wireless.

Airport utility can not find my airport express...

Airport utility can not find my airport express...
I was trying to connect a PC (Windows XP) laptop to my wireless network via the airport express.
I have a Mac with an airport that I use to get internet in my other room. I am trying to get internet on the laptop too.
I somehow manage to erase my network & now my airport utilities won't even scan/recognize my airport??
ANY help would be appreciated, mac helpline wanted $59 to help & I live in a small northern community where they do not have anyone that will address a Mac issue!!
Thanks for your time.

Thank you SO MUCH Tesserax for taking the time to help!
I powered everything down, slowly powered everything else up from the modem to the airport then the computer. I then reset the airport & rescaned it through utilities. I set up a new network & voila! wireless up & running again.
I am going to try to connect the laptop to the network now.....well, mabey tomorrow night, I've had enough for 1 evening!
I will update....or possibly be begging for more help...we'll see!
Thanks again for your time!

Can not see my Airport in the list of Wifi networks and is blinking organge all the time

Can not see my airport on the list of WiFi networks and is blinking orange all the time. Tried to reset several times.

Do you have a Mac or idevice for setting up the Express? It does require a later utility than is available for windows.
You might be able to setup with the v5 utility in windows but there is no guarantee.
You should use a simple name both for the base and the wireless. eg AEXgen2 base name and AEXwifi for wireless name.. that is if you get access.

My iphone can't see any wifi networks

my iphone can't see any wifi networks ... i tried to reset network setting and reset all setting and update the ios system but no way

I, too, fear it might be a hardware problem . I removed all security from my router but still no networks appear in the list nor can I connect directly by typing in the SSID. Tried two routers: Apple Airport Extreme and a Linksys something-er-other provided by Bell.
I will give HP a call tomorrow and see if they can sort this out.
Thank you for your help/advice!
Edit: almost certain it's a hardware problem: I clicked on the Help button while on that "Scanning for networks" dialog during initial setup and as one of the "helpful" suggestions, it said my Mac address was 00:00:00:etc.

Mbp can't see my airport !

I've been using my mbp with AExtreme n for 6 months without any problems. Since 2 weeks, sometimes when I boot my mbp, it can't see the airport. I haven't changed or moved anything ! Strangely, my mbp can see other wifi networks and my colleagues have no problem seeing my airport. I have to reboot my computer at least 5 times so that it sees the airport again.
Any ideas why ?

Try the following:
1. Delete Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Delete the network(s) you regularly use from the list
2. Delete AirPort Keychain Entries
- Launch the "Keychain Access" application located in Applications/Utilties.
- Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
- Restart, or log out then back in.
3. Add Preferred Network(s)
- System Preferences > Network > AirPort > Configure
- In the "By default, join:" pull-down menu, select "Preferred networks"
- Add the preferred network(s) using the "+" button.
- Restart or log out then back in.

Can't see any words on finder menu

My finder menu, trash, and drop down menus are blank. I can't see any words or icons.
This is what it looks like
http://imgur.com/y9bMFi7,dHUismv

Try the following: boot into the Recovery volume (boot with the Command + R keys held down), select Disk Utility and repair both the disk permissions and disk. Reboot normally and check the menus.

Can not see any Data in OKE.OKE_K_FUND_ALLOCATIONS

I am looking in this table with SQLPlus and TOAD and can not see any rows.

Hi Hussein;
First I ran:
select fu.user_name, fr.responsibility_name
, fu.user_id, fr.responsibility_id resp_id
, furg.responsibility_application_id resp_appl_id, furg.security_group_id sec_group_id
from apps.fnd_user_resp_groups furg
, apps.fnd_user fu
, apps.fnd_responsibility_vl fr
where furg.user_id = fu.user_id
and upper(fu.user_name) = upper('&User_Name')
and furg.responsibility_id = fr.responsibility_id
order by 1, 3
Passing in SYSADMIN
Taking this row:
SYSADMIN,General Ledger Super User,0,20434,101,0
I ran:
I ran exec fnd_global.APPS_INITIALIZE (0,20434,101,0);
I still get no rows returned.
Is thier a way in the App to ensure the SYSADMIN,General Ledger Super User can see this data? Or am I missing something else?

How do I delete photo ALBUMS from my iPHONE 4? I sync via icloud and I can not see any folders selected in itunes. I searched the internet and basically there is no one who has the answer to how you delete the iphone photo library and misc albums

how do I delete photo ALBUMS from my iPHONE 4?
I sync via icloud and I can not see any folders selected in itunes.
I searched the internet and basically there is no one who has the answer (so far)
to how you delete the iphone photo library and misc albums
I have also had every iphone and I am not stupid.
charles altman

Replying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....

TS1506 I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments.

I just updated my IOS to 7.1 and now I can't open Microsoft attachments - I used to always do it. Help - I use my iPad for work and now can't see any attachments. I've tried opening straight into other apps and just get error messages, and I the mail preview there is just a grey screen telling me the file name and size. It worked fine until I did the IOS upgrade

Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
 Cheers, Tom

Utility can't 'see' any airports

Similar Messages

Maybe you are looking for