Utility cannot find airport extrme, how can I set it up? thanks

trying to setup the airport extreme but utility cannot find the deviceto begin setup , any suggestions be gratly appreciated

Which model AirPort Extreme is it, are you using a Mac to configure it, and if so what version of OS X is it running?
In general, start with a "hard reset" - hold its reset button depressed continuously, five to ten seconds, until its LED flashes rapidly. After it restarts the Extreme will create an open wireless network to which you must connect and subsequently use AirPort Utility to configure it.

Similar Messages

  • HT1178 Airport utility cannot find Airport Time Capsule base station

    I just purchased the new AirPort Time Capsule 2TB and after trying to set it up with my MAC I realized that the AirPort utility software was old and instead tried setting it up with my ipad that has iOS 6.1.3. However eventhow I remain connected in the internet, I cannot find any base station with the updated AirPort utility. Reseting Time Capsule and modem has not helped. Has anyone else had the same problem and how have you solved it?

    Sorry, can you please clarify, and provide a bit more information?
    You can "see" the Time Capsule using your iPad, but not using AirPort Utility on your Mac, correct?
    If yes, what version of AirPort Utility do you have on your Mac?  If you are not sure, open AirPort Utility, click the AirPort Utility menu in the upper left corner of the screen and click About AirPort Utility.
    Post back with the version number that you see there.

  • PC AirPort Utility cannot find Airport extreme w/ ethernet but has internet

    Hello, I have set up the airport extreme to use with a MacBook. I pluged everything in just fine (PC using ethernet) but had to configure the base station with the MacBook as the PC could not find it using the Utility. However the PC is connected to the internet just fine through the base station's ethernet port.
    My problem is trying to get the PC (running XP home 2002 sp2) to see the Airport Extreme using the Airport Utility in order to start configuring network printing and eventually AirTunes.
    I cannot seem to find this solution anywhere. Please help if you can. Thanks!

    Hi I don't know for sure if this is your answer, but with your mac go into setup again. Under wireless tab, then wireless options , make sure 'create a closed network' is unchecked. This may allow the pc to see any Apple base stations. Good luck
    Can you please tell me exactly where to find the "create a closed network" box? I am brand new to mac and am still finding my way around. Thank you so much!

  • Airport Utility CANNOT find Airport extreme?  HELP!

    I just bought a Airport Extreme (802.11n) and my Airport is just blinking amber... When I launch Airport Utility and scan for a wireless device it comes up with nothing. I cannot get past this step to setting up the Airport Extreme. Any help would be appreciated!
    What am i doing wrong? I have a feeling the Airport is not sending a signal out... is it defective? HELP.......

    Welcome to the discussions!
    The AirPort Extreme broadcasts a default wireless network with a name like Apple Network xxxxxx, where the 'x" can be either a number or letter. Look for this network and log onto it (there is no password required). Then open AirPort Utility to see if it can communicate with the AirPort Extreme.
    You may need to restart both the AirPort Extreme and your computer.
    An alternate (and probably better) method is to temporarily connect an ethernet cable from your computer to one of the LAN <-> ports on the AirPort Extreme to establish a direct connection. You can disconnect the ethernet cable when you have the AirPort Extreme configured.

  • When making a slideshow in iPhoto some iTunes files can no longer be found (cannot find link). How can I relink iphoto to the moved itunes files?

    Hello everyone :-)
    I am Using Iphoto 09 ver 8.1.2 & itunes ver. 10.2.2 in this situation.
    I have recently moved my iphoto library & Itunes library files to a large external hard drive.
    I have successfully set the computer to read / run both libraries from the hard drive & they are working well as a stand alone. ( I Have done this before)
    Unforntualey this time I foolishly moved some itunes album folders around from compulations / various artists into the main media file before checking into what the ramifications would be.
    After searching on here I learned that was not advised as itunes would not be able to automaticly find them since I moved them.
    In itunes clicked on some of the exclamtion marks of the songs that I moved & linked them up to the main media folder so they could be now found by itunes. I believe itunes asked to look there in that location for all missing files & I selected that option.
    It appears to have worked as when I click on them in itunes they now play.. yeah!
    But now I am finding that when I try to add certain songs for slideshows in iphoto & imovie that those moved songs cannot be found by those programs :-(
    ( I assume the same would be true for iDVD)
    So my questions are... Is there now a way to have those other programs find the moved songs?
    I do have a older backup of my itunes media & I can try & move the album folders back to the original place they where by comparing the two but it is a very large library of 40k songs... so I thought to ask the knowledge & wisdom of the community before I attempted any further fixes.
    It would take a bit of time but it could be done & I don't want to just use the older copy of my itunes as I have made many additions of albums to the library & added allot of album artwork as well. (Stuff that "itunes" & "tune up" couldn't automatically find)
    Thanks in advance for any advice on this silly mistake I made.
    Sal

    Try the following:  delete the iPhoto preference file, <b><i><font color="maroon">com.apple.iPhoto.plist</font></i></b>, that resides in your Home/Library/Preferences folder.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key.  You'll also have to reset the iPhoto's various preferences.
    Also delete the com.apple.iApps.plist file from the same Preferences folder.  Then launch iTunes and then iPhoto.  See if that will restore the links.
    OT

  • Airport utility cannot find airport express

    Just got new AirPort Extreme connected to comcast. It is hooked up to my new iMac via Ethernet.  Went to airport utility to add on an airport express -- it doesn't find it. When connecting it says "sorry error- try again". The tried connecting it by Ethernet cable to AirPort Extreme. It connected. Then I disconnected hoping it would still be able to be found. No luck. Any suggestions? Thanks. Rudy.

    Did you follow the step by step instructions that I provided above?
    Tap on Settings on the iPad / iPhone home screen
    Tap on WiFi
    Tap on AirPort Express under the heading of Setup a New AirPort Base Station
    Follow the prompts
    No where did I say to "open" AirPort Utility.

  • Airport Utility cannot find Airport Extreme

    So, I'm setting up my neighbor's Airport Extreme, and the Airport Utility isn't seeing any airport, even though it's plugged in.
    Any suggestions? It does not bode well if I'm stopped at the first step of setting up.

    Plugged in? Do you mean into a electrical outlet or via ethernet? Does your neighbor have a wireless card and is it turned on? What are you trying to set up? Wired? Wireless? Join a wireless network? I understand if these are a lot of questions and you may not know all these details since it is not your own setup.

  • HT4236 Hi, I have photo's on my i phone (that are in albums and not on the camera roll) that I want to backup to my computer. I do not seem to be able to move these pictures to the camera roll, and my computer cannot see them. How can I do this? Thanks fo

    Hello,
    I have photos on my i-phone in albums (not on the camera role, and I don't seem to be able to transfer them to the camera roll) that I want to back up to my computer, but neither my computer or i-tunes can see these albums.
    Any idea's as to how I can save these 500 odd photo's?
    Thanks for any help that you are able to offer.
    Chris

    There are only two ways pictures get on an iPhone.
    1) Pictures taken on the device that show up in the Camera Roll.
    2) Pictures synced from the computer via iTunes to the device that show up in other folders.
    There is no need to back these pictures up from the iPhone to the comptuer as they already exist on the computer.

  • AirPort Utility cannot find TC

    I'm having problems with connecting my Time Capsule with my Mac via ethernet cable. AirPort Utility cannot find the device, the Capsule is flashing amber only. I have tried to restart the device and modem but still no progress.. Do you know what might be the problem? I'm confused..

    I am having the same problem. No matter how I attempt to connect TC (ie. Ethernet connected to Linksys Router or as the hub for my network connected directly to my cable modem) , it seems to start correctly (brief green light) then solid amber and I can hear the disk coming up to speed....and then Blinking Amber.
    The really odd part is that it worked perfectly for the first month.
    Obviously, Airport Utility can't find it!
    It is the 1 TB model.
    Please, any suggestions?

  • Airport utility cannot find base station

    Hello. I upgraded to Leopard. I have normal internet access from airport extreme but airport utility cannot find my base station. How can I re-establish contact? Thanks

    Which base station do you have?
    The "AirPort Utility" is only compatible with the round 802.11b/gAirPort Extreme base station (AEBS), square 802.11b/g/n AEBS, and AirPort Express (AX).
    It is not compatible with the older graphite 802.11b AirPort base station (ABS) nor the dual-Ethernet (aka "snow") ABS.
    If you have a compatible base station, have you tried doing a reset on the base station and perhaps temporarily connect your computer via Ethernet to the base station?

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • Airport utility cannot find my Airport Express, repeated rescans, nothing, even with direct connect via Ethernet. Help!

    I use Airport Express to stream iTunes to my home stereo. This is the ONLY thing I use it for. It quit working and now Airport Utility cannot find the Airport Express unit, even after repeated re-boots of all components, resetting the Airport Express, even when connected directly to my router via Ethernet. I use a D-Link wirless router.
    I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
    The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it. Until Utility can find and recognize the Airport Express hardware, I cannot adjust or reset any settings, etc.
    Help!

    I downloaded the latest Airport Utility, but it will NOT work with XP (from the Apple website, not my words).
    The latest version of AirPort Utility.....5.6.1.....will only run on a Windows 7 machine.
    Try AirPort Utility 5.5.3 for Windows (make sure that  you have Service Pack 3 installed on your PC, otherwise the application will not run on an XP machine).
    The Airport Express will achieve a solid green indicator after reset, but Airport Utility cannot find it.
    After a "hard reset" or "factory default reset", the light will not be green.....it will be slowly flashing amber after it restarts. See this Apple support document for more information on various resets:
    Resetting an AirPort Base Station or Time Capsule FAQ

  • Airport utility cannot find Extreme nor Express, but internet is working?

    I have an airport extreme base station and and airport express (as a wireless extender and media speakers)
    When my iMac wakes up from sleep, airport utility cannot find any devices.
    - internet works as usual
    - airplay doesn't work (via my ipod or my iphone)
    - apple TV 2 can't find the itunes library.
    - in system preferences -> network - my network seems to be all ok and when I turn off airport and on again, both devices suddenly appear in the airport utility. But when the iMac goes to sleep, same problem happens.
    - I have made ensured that my network is the preferred network but still the problem persists.
    as the internet is working, there doesn't appear to be a problem. However, when airplay and apple TV are not working properly, this is a problem!
    Grateful for any help. Thanks.

    My Airport utility cannot find my base station either, and I can't print. But I can access the Internet!
    The base station just "vanished" one day after working perfectly for about two months. I first discovered this when I was unable to print - I began troubleshooting by entering the utility, only to discover the base station was not listed.
    I finally deleted my networking settings in Vista, and then did a factory reset on the Aiport Extreme. I then set everything up from scratch again to successful resolution.
    Then again one day a short time after that, it vanished again! In frustration, I disconnected Airport and put it away. I tried setting up a new Dlink I purchased to replace the Airport, but the Dlink didn't work either!!! Dlink tech support couldn't fix the problem and suggested I get my money back. I then, as a last ditch attempt, reconnected the Airport. It automatically found the base station without me doing anything besides just hooking it back up!
    It worked for about two weeks and now it vanished again! The utility upgrade released the other day has not fixed this problem. I guess I'll delete networking connections again in Vista, and do a factory reset to Airport again.
    I guess Airport and Vista just don't play well together.

  • Airport Utility cannot find my Extreme base station but everything works!

    I must be going crazty, but I can't figure this one out. I've had my Extreme and Express configured since November of 2007. Airport Utility would always find them and let me look at the configuration. I don't believe that anything major has changed on my laptop. Today I went to run Airport Utility and it cannot find my 2 stations. Again, everything is working, I can surf the net, from various laptops throughout my house.
    I had to do a factory reset to the extreme, and thankfully I remembered the 10.0.1.1/public and was able to reload a baseconfig I had. After this I still couldn't find the extreme nor the express with Airport Utility.
    Does anyone have any suggestions? Why would Airport Utility stop finding my stations?
    Any help would be amazing.
    Thanks,
    Frank

    My Airport utility cannot find my base station either, and I can't print. But I can access the Internet!
    The base station just "vanished" one day after working perfectly for about two months. I first discovered this when I was unable to print - I began troubleshooting by entering the utility, only to discover the base station was not listed.
    I finally deleted my networking settings in Vista, and then did a factory reset on the Aiport Extreme. I then set everything up from scratch again to successful resolution.
    Then again one day a short time after that, it vanished again! In frustration, I disconnected Airport and put it away. I tried setting up a new Dlink I purchased to replace the Airport, but the Dlink didn't work either!!! Dlink tech support couldn't fix the problem and suggested I get my money back. I then, as a last ditch attempt, reconnected the Airport. It automatically found the base station without me doing anything besides just hooking it back up!
    It worked for about two weeks and now it vanished again! The utility upgrade released the other day has not fixed this problem. I guess I'll delete networking connections again in Vista, and do a factory reset to Airport again.
    I guess Airport and Vista just don't play well together.

  • Cannot set up Time Machine because Airport Utility cannot find it.  What do I do now?

    Sorry, I meant to say Airport Utility cannot find Time Capsule.  The TC is not listed as an available drive in the TM setings panel.  Trying to set up a MBP.  iMac TM settings panel lists TC but if I search for it from either machine, iMac or MBP it is not found.  Repeated rescanning doesn't find it.  Also trid Airport Utility from iPad and iPhone, still not found.  When I first purchased it I set it all up so I have logged into it before.  That was a couple of months ago, now I've got around to setting up TM I can't access it.  It is continuing to provide my wireless network though.

    OK, turned off all devices, pulled the plug out of the TC, waited then plugged back in.  Started everything up again and Airport Utility can now find the TC.
    Thanks to you both for trying to help.  Next time I'll try this first but it didn't seem like a very elegant Apple solution to the problem.

Maybe you are looking for