Utility does not detect two Aiport express-g devices at the same time

All I can get is the utillity (5.3.2) to detect the device if I select the correspondiing Apple Network. After changing the name, when I plug the second device in it is detected by amongst the rest of wireless networks but not by the Aiport Utility app. Light in the undetected one flush meaning error.
Any ideas?
Thanks

fitnessdr wrote:
Thank you for the information. So if I were to return the new bluetooth keyboard, should I purchase the "Palm 3169WWZ Wireless Keyboard", or is there another model I should be looking for? (From what I can tell, I believe this one will use IR.)
THANKS!
Correct, that's the one I use.
Be sure to download the newest driver (1.13) for the keyboard from the Palm Support pages for the keyboard:
http://kb.palm.com/wps/portal/kb/na/keyboards/palmuniversalwirelesskeyboard/unlocked/downloads/page_...
Do not install the driver that comes with the device on the disk - 1.13 is designed for the TX and fixes a bug that existed in the original driver.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Using Aiport Express and internet at the same time?

I was just wondering if anyone could offer any advice on this subject please?
I've got a Macbook running through a wireless BT ADSL modem. I have also managed to connect the Macbook to my Aiport Express to allow me to wirelessly pipe iTunes through my stereo. I am aware that you cannot run both at once (i.e pipe music and browse the web) due to the Macbook being able to be only connected to one wireless network at a time.
My questions is whether there is anyway round this? If I bought an Aiport Extreme base station, connected that to my wireless router and used the Airport Extreme base station for the wireless connection would I be able to add the Aiport Express to that wireless network and subsequently have the internet and the Aiport Express running on the same wireless network - hence being able to pipe the music wirelessly and also browse the web at the same time?
Or is there another way round it?
Any info anyone could offer would be a great help
Thanks in advance
James

Ahh am I right in thinking this is the way to do it?
http://docs.info.apple.com/article.html?artnum=302153
Thanks
James

My airport utility does not find my airport express device

My airport utility does not find my airport express device

In order for the AirPort Utility on your iOS device to find the Express, both need to be connected to the same Wi-Fi network. By default, the Express will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN. Can you iOS device find this network?

I have a perfectly good wi-fi setup but it will not detect my Aiport Express no matter what aI try. Help!

I have a perfectly good wi-fi setup but it will not detect my Aiport Express no matter what aI try. Help!

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

Hello everyone, I just updated my 3GS from iOS 5.0.0 to 5.0.1 Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network. I tried restarting the phone se

Hello everyone,
I just updated my 3GS from iOS 5.0.0 to 5.0.1
Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

You do not need to keep posting the same thing over and over again.
Look to the right side of this page at "more Like this" or do a forum search.

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Unable to sync music in Library of MacBook Air with iPad and iPhone. Appears to start synchronising but does not actually do it. All devices run on same Apple ID. Suggestions please.

Unable to sync music in Library of MacBook Air with iPad and iPhone. Appears to start synchronising but does not actually do it. All devices run on same Apple ID. Suggestions please.

Re Outlook for Mac - can anyone confirm that this will acheive my aims to have emails and associated folders within email to synch across all devices and that calender will also sycn across all devices using iCloud ?

Can I export my sidecar files to two or more hard drives at the same time from one computer?

Can I export my sidecar files to two or more hard drives at the same time from one computer? How do I do this, if it is possible?

Each image is imported into the LR Catalog from just one stated location on disk. And that is where the sidecar gets written.
But if you want, outside of LR, you can have a file sync utility replicate all physical changes within those folders on disk, into other corresponding locations on other drives - which hold a copy of all the same images, and a copy of the sidecars too. This might happen continuously, periodically or on demand depending on the particular tool you use... for example, the Dropbox desktop app.
If you also want to have your LR Catalog replicated, I think this can only be done when LR is not running and using that.

IMac can't running any two fire wire hard disks at the same time . which

iMac can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????
Message was edited by: KennyG1983

Hi KennyG1983-
How are you connecting these drives?
This may help: What to do if your computer won't recognize a FireWire or USB device
Luck-
-DaddyPaycheck

Connecting to multiple Airport Express base stations at the same time?

I want to be able to use wireless internet and stream music to my stereo at the same time, but I only have a single internet connection behind my stereo and it's connected to the Pay TV. My options seem to be getting a new line installed behind the stereo so I can insert this into the same Airport Express base station I use for my music, or buying a second Airport Express base station and connecting it to one of the other internet connections in the room, then connecting to both Airport Express base stations at the same time.
Is this possible? Are there other alternatives?
Many thanks

Nate, Welcome to the discussion area!
Once you have a network, you can connect multiple AirPort Express (AX) to that network (wirelessly or via Ethernet). When your computer joins that network it can access all the AX.
You could take your current internet connection and run it into an inexpensive router with multiple Ethernet ports (not the AX). If this is a wireless router then your AXs could be located elsewhere and connect as wireless clients to that network. Once you computer joined that network it could stream music to the AXs.

Mac Pro can't running two fire wire hard disks at the same time .

Mac Pro can’t running any two fire wire hard disks at the same time . which two hard disks have extra power from power socket . If i just insert one of them .No problem . If connect two Hds at the same time. Leopard cant find it and the Hds seem no problem. the machine must be restarted and then use one . No problem . I have formated the HD many times .even if which format is Fat 32 or Mac issue persists .Boot from installation CD used the disk utility . Issue stills . If i used one fire wire HD that get power from power socket and used one fire wire device . Leopard was no problem during this time . Whether is this design problem or my machine hardware problem?My Mac has been changed the logic board by Apple service . Do you have similar case in here????

I connect both hard disks that get power from power supply normally. Also have ever changed the format as GUID. Which always use the power cord . I felt confusion why the issue just happened connect both hard disks with extra power at the same time. If i used one hard disk connect to firewire port . Another firewire port connect other firewire device . No problem at all.

HT2508 Airport express for more than one device at the same time.

I just set up my Airport Express on my MacBook, but when I try to use this wireless connection on my iPad, I have to disconnect from my existing connection on my MacBook first. How can I use both devices at the same time without having to disconnect?

Hi,
Yes.
Jim

When I use a projector via a VGA adapter I can not run my Bluetooth speaker or other Bluetooth devices at the same time. Can anyone help me with this?

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

I try to find help. I can not run a projector and a Bluetooth device at the same time. Even though my Bluetooth speaker is recognized, and I have changed the settings to this speaker, it wont play any sound. I have got also problems using other Bluetooth devices when I use the projector via a VGA adapter.

Telnet two devices at the same time 1 C# program

Hi, currently I have one 100% working program used to telnet my Arduino circuit.
I use this C# class found somewhere around the web: Anyway, without this forum, I wouldn't be able to finish my program.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Net.Sockets;
namespace USSR
enum Verbs
WILL = 251,
WONT = 252,
DO = 253,
DONT = 254,
IAC = 255
enum Options
SGA = 3
class TelnetConnection
TcpClient tcpSocket;
int TimeOutMs = 100;
public TelnetConnection(string Hostname, int Port)
tcpSocket = new TcpClient(Hostname, Port);
public string Login(string Username, string Password, int LoginTimeOutMs)
int oldTimeOutMs = TimeOutMs;
TimeOutMs = LoginTimeOutMs;
string s = Read();
if (!s.TrimEnd().EndsWith(":"))
throw new Exception("Failed to connect : no login prompt");
WriteLine(Username);
s += Read();
if (!s.TrimEnd().EndsWith(":"))
throw new Exception("Failed to connect : no password prompt");
WriteLine(Password);
s += Read();
TimeOutMs = oldTimeOutMs;
return s;
public void WriteLine(string cmd)
Write(cmd + "\n");
public void Write(string cmd)
if (!tcpSocket.Connected) return;
byte[] buf = System.Text.ASCIIEncoding.ASCII.GetBytes(cmd.Replace("\0xFF", "\0xFF\0xFF"));
tcpSocket.GetStream().Write(buf, 0, buf.Length);
public string Read()
if (!tcpSocket.Connected) return null;
StringBuilder sb = new StringBuilder();
do
ParseTelnet(sb);
System.Threading.Thread.Sleep(TimeOutMs);
} while (tcpSocket.Available > 0);
return sb.ToString();
public bool IsConnected
get { return tcpSocket.Connected; }
void ParseTelnet(StringBuilder sb)
while (tcpSocket.Available > 0)
int input = tcpSocket.GetStream().ReadByte();
switch (input)
case -1:
break;
case (int)Verbs.IAC:
// interpret as command
int inputverb = tcpSocket.GetStream().ReadByte();
if (inputverb == -1) break;
switch (inputverb)
case (int)Verbs.IAC:
//literal IAC = 255 escaped, so append char 255 to string
sb.Append(inputverb);
break;
case (int)Verbs.DO:
case (int)Verbs.DONT:
case (int)Verbs.WILL:
case (int)Verbs.WONT:
// reply to all commands with "WONT", unless it is SGA (suppres go ahead)
int inputoption = tcpSocket.GetStream().ReadByte();
if (inputoption == -1) break;
tcpSocket.GetStream().WriteByte((byte)Verbs.IAC);
if (inputoption == (int)Options.SGA)
tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WILL : (byte)Verbs.DO);
else
tcpSocket.GetStream().WriteByte(inputverb == (int)Verbs.DO ? (byte)Verbs.WONT : (byte)Verbs.DONT);
tcpSocket.GetStream().WriteByte((byte)inputoption);
break;
default:
break;
break;
default:
sb.Append((char)input);
break;
My UI Code:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.IO;
using System.Linq;
using System.Net;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Net.Sockets;
namespace USSR
public partial class mainForm : Form
TelnetConnection tc;
public bool keyPressChecker = false;
public bool connectedChecker = false;
public mainForm()
InitializeComponent();
// webBrowser1.Navigate("http://admin:[email protected]");
this.tc = null;
this.connectedChecker = false;
private void radioButton2_CheckedChanged(object sender, EventArgs e)
try
if (submarineRadioBtn.Checked)
System.Diagnostics.Process.Start("dummySub.exe");
catch (Exception ex)
MessageBox.Show(ex.ToString());
private void centerBtnCamera_Click(object sender, EventArgs e)
private void forwardBtn_Click(object sender, EventArgs e)
if (connectedChecker)
this.tc.WriteLine("W");
private void connectToolStripMenuItem1_Click(object sender, EventArgs e)
try
//create a new telnet connection
tc = new TelnetConnection("192.168.0.102", 23);
if (tc.IsConnected)
connectedChecker = true;
catch (Exception ex)
MessageBox.Show(ex.ToString());
private void controlKeyDownCheckBox_CheckedChanged(object sender, EventArgs e)
if (controlKeyDownCheckBox.Checked == true)
keyPressChecker = true;
else
keyPressChecker = false;
private void controlKeyDownCheckBox_KeyDown(object sender, KeyEventArgs e)
if (keyPressChecker == true)
if (e.KeyCode == Keys.W)
if (connectedChecker)
tc.WriteLine("W");
if (e.KeyCode == Keys.S)
if (connectedChecker)
tc.WriteLine("S");
private void reverseBtn_Click(object sender, EventArgs e)
if (connectedChecker)
tc.WriteLine("S");
private void disconnectToolStripMenuItem_Click(object sender, EventArgs e)
try
tc = null;
connectedChecker = false;
catch (Exception ex)
MessageBox.Show(ex.ToString());
private void controlKeyDownCheckBox_KeyUp(object sender, KeyEventArgs e)
if (keyPressChecker == true)
if (e.KeyCode == Keys.W)
if (connectedChecker)
tc.WriteLine("O"); //decrease to MID PT.
if (e.KeyCode == Keys.S)
if (connectedChecker)
tc.WriteLine("P"); //decrease speed to MID PT.
private void exitToolStripMenuItem_Click(object sender, EventArgs e)
Application.Exit();
Now, what I want to know is this: IS IT POSSIBLE FOR MY C# PROGRAM TO TELNET TWO DEVICES AT THE SAME TIME?
Thanks
Glenn

try this links :
http://www.codeproject.com/Articles/19071/Quick-tool-A-minimalistic-Telnet-library
http://stackoverflow.com/questions/25116077/send-and-receive-commands-via-telnet-in-c-sharp
http://stackoverflow.com/questions/12283241/ssh-to-server-then-telnet-to-device

Airport utility is not detecting my airport express

it worked fine in the past. then I tried to switch to time capsule. I had problem with this. Probably I deleted in the airport utility programme my old airport express (pressing ignore).
Now when I want to use again my airport express in order to have a wlan network the utility programme is not detecting my airport express. I already pressed the reset button at my airport express, but it still doesn't work.
What can I do that the utility programme discovers again my airport express?

Be sure you perform the reset correctly. While the Express is powered up, press and hold the reset button and keep it depressed continuously, for at least five seconds, until its LED flashes rapidly. After a moment or two, the LED will flash amber, slowly. The Express will then appear as an unconfigured base station in AirPort Utility.
Depending on your version of Mac OS X the Express will appear in your AirPort menu as "Apple Network nnnnnn" or "New Airport Express..." Select it, and launch AirPort Utility to configure it.

Utility does not detect two Aiport express-g devices at the same time

Similar Messages

Maybe you are looking for