Utility no longer sees WPSM54G after firmware upgrade!!!

Hello,
I had a perfectly working system of :
WPSM54G (hw 1.1, fmrw 1017)
Utility version 1.1
XP desktop
XP laptop
Following the guidelines for allowing Windows7(x64) to connect I upgraded to the "mandatory" firmware version 1019. From that point the PrinterUtility cannot see/connect to the WPSM54G! Neither the original one (version 1.0), nor the newer (version 1.003) that came with the newer software "WPSM54G_Wizard_fw_2008_05_16"!
The WebUtility is accessible and working! The WPSM54G has a fixed IP in my LAN behind the WRT610N.
Before upgrading the firmware I tried to save its current version 1017 but there was no such option on the WebUtility.
How to solve this?
The support Linksys "provides" is outrageous. There is absolutely no way I can contact support - neither email, nor livechat for my country. These basic connectivity issues are absent from any documentation, and the latter is lacking anything useful.
Thank you in advance,

The Utility of the Printserver that you have WPSM54G will not work with Windows 7…. In order to setup the Printserver you need to open up the ports manually…
Click on Start - Control Panel - Devices and Printer... Under Printer and Faxes you need to right click on your Printer and then click on "Printer Properties" and then click on the "Ports" tab and then below you need to click on "Add Ports" and select "Standard TCP/IP Port" and click on "New Port" and in the "Printer Name or the IP address" you need to input the IP address of your "Print Server" and click on Next... then click on 'Customer" and click on “Settings" and Under Protocol Select "LPR" and below in the "LPR Queue Name" type "LP1" and check the box "LPR Byte Counting Enable" and click on OK.... and click on Next and Click on Finish and click on Apply and Close...
Once you are done with the Settings... Now you can try to print from your computer

Similar Messages

  • T410i SSD user and master password problem after firmware upgrade

    Hello.
    I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
    Previous firmware version: 1.3
    Current firmware version: 1.3.3
    SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

    My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
    You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

  • No Services and Touch ID no longer working anymore after i upgraded my Iphone 6 from IOS 8.00 to 8.02 today!!!!

    OMG!  No Services and Touch ID no longer working anymore after i upgraded my Iphone 6 from IOS 8.00 to 8.02 today!!!! Any Idea how to fix this?

    Go to settings do a reset after that tou will need to enter you Router wireless key Then wait for iPhone to come on. This worked for me on iPhone & ipad. Bsydd uk

  • PC-Suite sync fails after Firmware upgrade of E65

    After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
    - PC-Suite updated to 7.0.9.2
    - Outlook 2003
    - XP Prof.
    Any ideas?
    Solved!
    Go to Solution.

    The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
    Does somebody has an idea?

  • Why does PDF Optimizer no longer reduce size after CS4 upgrade?

    I've been able to successfully reduce the size of the PDFs created from my Illustrator files for years using Advanced> PDF Optimizer in Acrobat Pro. Upgraded to CS4 last week. Now it seems to have reduced everything, but the files are still huge. When I check Space Audit 96% or more is taken up by "piece information".
    I've tried changing the Adobe PDF presets, the Document Raster Effects settings, and outlining all text in Illustrator to see if that made a difference. Nothing. The frustrating thing is i've done this for years with no problem. HELP?!?!

    From: Riannosda <[email protected]>
    Reply-To: <[email protected]>
    Date: Wed, 22 Jul 2009 07:06:34 -0600
    To: Pamela Myhre <[email protected]>
    Subject: Why does PDF Optimizer no longer reduce size
    after CS4 upgrade?
    Hi, I've found the solution because today it happened to me as well.
    Just go to "PDF Optimizer", then click to "Discard user data" and finally to
    "Discard private data from other applications": in this way you delete any
    information left by Illustrator and your file's size will get reduced.
    It works.
    Good luckThanks so much! That works like a charm!!
    Pamela

  • Crippled 192.168.1.1 page after firmware upgrade

    hi,
    i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
    but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

    It is good to know that the issue is resolved
    After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

  • After the Airport update today, Airport Utility no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green?

    After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green?  I'm running Lion on my iMac and updated when Airport Utility prompted me to do so a few hours ago.  After applying the updates is when Airport Utility stopped seeing my routers.  But they are working?  Thoughts?

    Did you remember to completely power cycle the entire network?
    You would want to do this after any update or change to the network.
    If you did not do this yet......things are out of sequence.
    Power off everything on the network.....all devices.....power down order is not important
    Wait a few minutes
    Start the modem first and let it run a minute or two by itself
    Start the next device connected to the modem the same way
    Work your way out on the network starting each device about a minute apart
    Check the network

  • HP Laserjet p1102w - after firmware upgrade / Smart Install update - down to 1MB free memory

    Hello,
    I have a Laserjet p1102w running off a laptop with Windows 7 64-bit. Just bought the printer this month.
    After updating the firmware to 20120814 version and updating the SmartInstall update utility for the 20120814 version as well, I am now down to 1 MB free memory (out of 8MB originally). [Another LJ p1102w updated prior to these updates has 3MB free memory.]
    Because I have 1MB free memory, the printer is almost a brick. It can print simple text based pages - however, printing any page with a graphic or a PDF file will cause the printer to take forever to receive data - essentially preventing printing a page on  my new printer (while printing the same page instantaneously on my older nonupdated p1102w).
    Is there any way to fix this problem, given there is no memory upgrade option? Otherwise, this printer is a brick.
    Thank you in advance for a reply - especially from HP.

    Hi cyskim,
    Did you tried turning the printer off and on after updating the firmware? This should clear its memory, including any memory may affected during the firmware upgrade proccess .
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • AirPort Express constantly restarting after firmware upgrade

    Hello,
    I have an AirPort Express that extends a wireless network created by a Time Capsule. They are identified by AirPort Utility 5.6 as "AirPort Express 802.11n" and "Time Capsule 802.11n (4th Generation)". The AirPort Express has worked properly for several years, but after updating the firmware to 7.6.1 a few weeks ago, it regurlaly hangs for a while, but works fine again for hours or days in between (so it isn't broken). The Time Capsule was upgraded to 7.6.1 at the same time and works without problems.
    When the AirPort Express hangs, it's restarting itself all the time: the status light is solid amber for about a minute (starting up), then flashes two times amber (connecting), becomes green (ok) for half a second, and then solid amber again (restarting). This cyclic restarting can last for hours. Very strange behavior... During such cyclic restarting, it is on so shortly that it never shows up in AirPort Utility and it is impossible to connect and read the log file.
    A factory default reset is possible and allows to configure it with AirPort Utility. But after reconfiguring, the AirPort Express entrers the cyclic restarting again. The same happens when configuring to join (instead of extend) the wireless network. After trying to factory-reset and reconfigure several times and finally letting it in its cyclic restarting for a while, it suddenly comes back on and will work again for several hours or even days (until the problem comes back again).
    My next try will be to revert to firmware 7.6 (AirPort Utility 5.6 > Base Station > Upoad Firmware...). Any other ideas around?
    P.S.
    I didn't find several (advanced) functionalities of the original AirPort Utility (5.6) in the new version (6.x): for example "Upload Firmware", "Logs and Statistics", "Use dynamic global hostname", "Disconnect disk users", etc. I hope 5.6 will be available and maintained for a while...

    At the next hang of the AirPort Express and after a factory reset, I tried to revert to firmware 7.6 (AirPort Utility 5.6 > Base Station > Upoad Firmware… > select firmware from a list of available versions). After a while, it failed with the following error message:
         An error occurred while updating the firmware.
         Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-1)
    The Airport express was hanging again. After another factory reset, the menu item Upload Firmware… didn't show available firmware versions anymore, but asked to open a file in a finder pane. Is this expected behaviour?
    The event log of the Time Capsule shows the following entries during the cyclic restarting of the AirPort Express (which doesn't give me a clue about the cause of my problem):
    Jun 20 19:07:19
    Severity:5
    Associated with station 00:1f:f3:f4:bd:13
    Jun 20 19:07:23
    Severity:5
    Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
    Jun 20 19:07:23
    Severity:5
    Disassociated with station 00:1f:f3:f4:bd:13
    Jun 20 19:08:24
    Severity:5
    Associated with station 00:1f:f3:f4:bd:13
    Jun 20 19:08:28
    Severity:5
    Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
    Jun 20 19:08:28
    Severity:5
    Disassociated with station 00:1f:f3:f4:bd:13
    Jun 20 19:09:27
    Severity:5
    Associated with station 00:1f:f3:f4:bd:13
    Jun 20 19:09:31
    Severity:5
    Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
    Jun 20 19:09:32
    Severity:5
    Disassociated with station 00:1f:f3:f4:bd:13
    Jun 20 19:10:30
    Severity:5
    Associated with station 00:1f:f3:f4:bd:13
    Jun 20 19:10:34
    Severity:5
    Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
    Jun 20 19:10:35
    Severity:5
    Disassociated with station 00:1f:f3:f4:bd:13
    Does anybody have a suggestion what to try next? Any idea would be greatly appreciated!

  • Toshiba 47M7463DG no Cloud service after firmware upgrade

    Hi All,
    I have a problem with my Toshiba 47L7463DG. The Cloud services (accessible from the Home button) stopped working after the recent firmware upgrade. Is there something I can do to roll back to the previous firmware version or fix this problem?
    Details:
    Toshiba 2014-051
    May 21 2015
    Software Version 8.1.97.09.01.1
    MBoot Version 00813201
    Shipout G
    Thanks in advance.
    hysten

    Hello,
    I have the same problem.
    I have above mentioned TV since 3 months So far, everything was wonderful.
    Yesterday an update is installed automatically.
    After that all stations were adjusted and I no longer get into the cloud menu.
    So if I press the button with the "house", nothing happens.
    Wi-Fi is enabled and network test was successful. The Red button also works. So I'll be over in the individual libraries.
    Three times I set back the TV .Without Success.
    Once I was able to get into the cloud menu. When I went out of it and want into the menu again nothing happened.
    I also can not access the contents of my USB flash drive.
    The latest firmware is installed.
    Did someone have an idea?
    Thanks in advance
    Jan

  • SG300-28 switch in boot loop after firmware upgrade

    After performing a firmware upgrade on an SG300-20 switch from ver 1.1.0.73  to 1.2.5.70 the switch now boots up with the following error and resets:
    30-Aug-2011 10:47:33 %L1Mngr-F-PARAMTOOLONG: csco-sb parameter %s is too long.
    The attached file contains a full output of the console boot process.
    I have tried loading different versions from the console, but all produce the same error.
    Has any one any idea how to resolve this issue?
    Thanks
    Des

    Hello Tom, Thanks for your reply,
    I had done the process before with the 3 firmwares offered in the cisco website. I did it again, and i get a boot loop again, with following error:
    %L1Mngr-F-PARAMTOOLONG: csco-sb parameter serialNo is too long.
    Any ideas?
    Thank you,
    Nico
    Console
         Startup Menu
    [1]  Download Software
    [2]  Erase Flash File
    [3]  Password Recovery Procedure
    [4]  Set Terminal Baud-Rate
    [5]  Stack menu
    [6]  Back
    Enter your choice or press 'ESC' to exit:
    Downloading code using XMODEM.
    -- Download complete --
    Calculating file's checksum...OK
    Erasing FLASH ->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Writing to flash 0x6aa500 records...
    Setting checksum: 0x350925f6 , Address: 0x0
    OK.
    Flash programming success.
    Perform WARM BOOT ...
    Boot1 Checksum Test...............................PASS
    Boot2 Checksum Test...............................PASS
    Flash Image Validation Test.......................PASS
    BOOT Software Version 1.0.0.4 Built  08-Apr-2010  16:37:57
    Networking device with Marvell ARM CPU core. 128 MByte SDRAM.
    I-Cache 16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.
    MAC Address   :  58:35:d9:96:7f:5d.
    Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
    Preparing to decompress...
    100%
    Decompressing SW from image-1
    100%
    OK
    Running from RAM...
    Board ID is 22
    Device ID 0xdf5111ab
    *** Running  SW  Ver. 1.2.7.76  Date  19-Jul-2012  Time  17:54:43 ***
    HW version is V
    Base Mac address is: 58:35:d9:96:7f:5d
    Dram size is  : 128M bytes
    Dram first block size is  : 101376K bytes
    Dram first PTR is  : 0x1900000
    Dram second block size is  : 4096K bytes
    Dram second PTR is  : 0x7C00000
    Flash size is: 16M
    19-Jul-2012 17:54:46 %CDB-I-LOADCONFIG: Loading running configuration.
    19-Jul-2012 17:54:47 %CDB-I-LOADCONFIG: Loading startup configuration.
    Device configuration:
    Slot 1 - SF302-08MP
    Device 0: GT_98DX1005 (AlleyCat)
    -- Unit Standalone                --
    Tapi Version: v1.9.5
    Core Version: v1.9.5
    19-Jul-2012 17:55:02 %L1Mngr-F-PARAMTOOLONG: csco-sb parameter serialNo is too l
    ong.
    ***** FATAL ERROR *****
    Reporting Task: ROOT.
    Software Version: 1.2.7.76 (date  19-Jul-2012 time  17:54:43)
    ***** DEBUG *****
    DEBUG LOG IS EMPTY
    0x16a614
    0x167054
    0x6bdc18
    0x490518
    0x4959e4
    0x495bac
    0x815674
    0x816b10
    0x817e64
    0x1d51e8
    0x1cb010
    0x121d3c
    *****************  SYSTEM RESET  *****************

  • No power after firmware upgrade on nomad jukebox zen xtra

    I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

    I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

  • No contacs after firmware upgrade on N70

    Hi
    I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
    I did the upgrade again just to make sure that everything went OK with the same result.
    Can some help or has the same problem?
    Firmware V 5.0638.3.0.1 18-09-06 RM-84
    PC Windows XP SP2
    Nokia PC Suite 6.82.22.0
    NSU 1.2.0en
    Best regards
    Chris

    not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

  • HP 5524 Wireless does not work after firmware upgrade

    HI,
    I have just purchased an HP5524.  After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
    The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully. 
    However, ever since wireless will not work.  Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum.  The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
    Thank you

    Hi,
    Thank you for posting you query,
    In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen  instructions.
    If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup  and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Fans And Voume after FirmWare Upgrade

    Hey there!
    I have two very positive pieces of information, some repeated:
    1) The volume of my speakers and "line out" was weak at best prior to the FirmWare upgrade. Now, it is positively explosive! I mean, the volume control works just like I would have expected. Perfect...
    2) The fans are coming on more consitantly. I can actually hear them now, which makes me wonder... The temp on the Hard Drive has not gone above 92 since I upgrade the firmware (not that I have noticed however).
    Bob

    Hi Bob!
    What did you use to check the temperature?
    I installed the 10.4.6 and the firmware, and now I could cook an egg on the keyboard. I didn't have the heat problem before, now after the updates, I am fried (literally).
    Gus

Maybe you are looking for