Utilization
Hi ,
May i know how utilization triggers in J1IIN Automatically like export -Under letter of under taking,Deemed Export-EOU.Is it from Maintaining default excise grp & series grp?
Thks
Edited by: SDRAVI on Jun 12, 2009 4:44 PM
Ravi,
We have to make utilization determination based excise grp & series grp....
SPRO>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions--> Utilization -->Utilization Determination
For more infomation Do visit http://www.scribd.com/doc/2527809/CINcustomizing-1
Thanks,
Raja
Similar Messages
-
Report for calculating capacity utilization and Efficency
Hi,
We are following REM in our company. The production line is defined in the production version. While backflushing the production line is called automatically and hence backflushing is done.
We calculate the capacity utilization by using the formulae.
Capacity Utilization = (Backflushed Qty/ Available capacity)*100.
My queries are:
1. Is there any standard report to determine the capacity utilization of a production line.
2. Is there any standard report to calcualte the efficency of a production line.
waiting for reply.
With regards,
AfzalHi afzal
1. you have mentioned ; Available capacity = Std.time per piece * no. of working hrs
Let me explain with example
suppose per piece if it takes 10 mins, now according to your formula
A.C = 10* 24 * 60 = 14400 per day, but which is not correct
normally if 10 mins/ peice means 6 peices/hr and for 24 hrs 24*6 = 144.
so it must be A.C = no. of working hrs / Std.time per piece.
2. You have mentioned = capacity utlilised = total Backflushed qty per day., which means you are caluculating capacity utilization based on input material.
3. Utilization = (Avaliable capacity/ Capacity utilised) * 100
suppose let us consider Available capacity per day =100
capacity utilized = 50
Utilization = (100/50) * 100 = 200%, which is not correct it should be only 50%
Here my main doubt is why You are caluculating capacity based on input material.
Please explanin me you business process and whats the exact requirement so that I can help you out.
Please check the formulae -
Follow up on an old thread about memory utilization
This thread was active a few months ago, unfortunately its taken me until now
for me to have enough spare time to craft a response.
From: SMTP%"[email protected]" 3-SEP-1996 16:52:00.72
To: [email protected]
CC:
Subj: Re: memory utilization
As a general rule, I would agree that memory utilzation problems tend to be
developer-induced. I believe that is generally true for most development
environments. However, this developer was having a little trouble finding
out how NOT to induce them. After scouring the documentation for any
references to object destructors, or clearing memory, or garbage collection,
or freeing objects, or anything else we could think of, all we found was how
to clear the rows from an Array object. We did find some reference to
setting the object to NIL, but no indication that this was necessary for the
memory to be freed.
I believe the documentation, and probably some Tech-Notes, address the issue of
freeing memory.
Automatic memory management frees a memory object when no references to the
memory
object exist. Since references are the reason that a memory object lives,
removing
the references is the only way that memory objects can be freed. This is why the
manuals and Tech-Notes talk about setting references to NIL (I.E. freeing memory
in an automatic system is done by NILing references and not by calling freeing
routines.) This is not an absolute requirement (as you have probably noticed
that
most things are freed even without setting references to NIL) but it accelerates
the freeing of 'dead' objects and reduces the memory utilization because it
tends
to carry around less 'dead' objects.
It is my understanding that in this environment, the development tool
(Forte') claims to handle memory utilization and garbage collection for you.
If that is the case, then it is my opinion that it shoud be nearly
impossible for the developer to create memory-leakage problems without going
outside the tool and allocating the memory directly. If that is not the
case, then we should have destructor methods available to us so that we can
handle them correctly. I know when I am finished with an object, and I
would have no problem calling a "destroy" or "cleanup" method. In fact, I
would prefer that to just wondering if Forte' will take care of it for me.
It is actually quite easy to create memory leaks. Here are some examples:
Have a heap attribute in a service object. Keep inserting things into
the heap and never take them out (I.E. forgot to take them out). Since
service objects are always live, everything in the heap is also live.
Have an exception handler that catches exceptions and doesn't do
anything
with the error manager stack (I.E. it doesn't call task.ErrMgr.Clear).
If the handler is activated repeatedly in the same task, the stack of
exceptions will grow until you run out of memory or the task terminates
(task termination empties the error manager stack.)
It seems to me that this is a weakness in the tool that should be addressed.
Does anyone else have any opinions on this subject?
Actually, the implementation of the advanced features supported by the Forte
product
results in some complications in areas that can be hard to explain. Memory
management
happens to be one of the areas most effected. A precise explanation to a
non-deterministic process is not possible, but the following attempts to
explain the
source of the non-determinism.
o The ability to call from compiled C++ to interpreted TOOL and back
to compiled C++.
This single ability causes most of the strange effects mentioned in
this thread.
For C++ code the location of all variables local to a method is not
know
(I.E. C++ compilers can't tell you at run-time what is a variable
and what
isn't.) We use the pessimistic assumption that anything that looks
like a
reference to a memory object is a reference to a memory object. For
interpreted
TOOL code the interpreter has exact knowledge of what is a reference
and what
isn't. But the TOOL interpreter is itself a C++ method. This means
that any
any memory objects referenced by the interpreter during the
execution of TOOL
code could be stored in local variables in the interpreter. The TOOL
interpreter
runs until the TOOL code returns or the TOOL code calls into C++.
This means
that many levels of nested TOOL code can be the source of values
assigned to
local variables in the TOOL interpreter.
This is the complicated reason that answers the question: Why doesn't a
variable that is created and only used in a TOOL method that has
returned
get freed? It is likely that the variable is referenced by local
variables
in the TOOL interpreter method. This is also why setting the
variable to NIL
before returning doesn't seem to help. If the variable in question is a
Array than invoke Clear() on the Array seems to help, because even
though the
Array is still live the objects referenced by the Array have less
references.
The other common occurrence of this effect is in a TextData that
contains a
large string. In this case, invoking SetAllocatedSize(0) can be used
to NIL
the reference to the memory object that actually holds the sequence of
characters. Compositions of Arrays and TextData's (I.E. a Array of
TextData's
that all have large TextDatas.) can lead to even more problems.
When the TOOL code is turned into a compiled partition this effect
is not
noticed because the TOOL interpreter doesn't come into play and
things execute
the way most people expect. This is one area that we try to improve
upon, but it is complicated by the 15 different platforms, and thus
C++ compilers,
that we support. Changes that work on some machines behave
differently on other
machines. At this point in time, it occasionally still requires that
a TOOL
programmer actively address problems. Obviously we try to reduce
this need over
time.
o Automatic memory management for C++ with support for multi-processor
threads.
Supporting automatic memory management for C++ is something that is
not a very
common feature. It requires a coding standard that defines what is
acceptable and
what isn't. Additionally, supporting multi-processor threads adds
its own set of
complications. Luckily TOOL users are insulated from this because
the TOOL to C++
code generator knows the coding standard. In the end you are
impacted by the C++
compiler and possibly the differences that occur between different
compilers and/or
different processors (I.E. Intel X86 versus Alpha.) We have seen
applications that
had memory utilization differences of up to 2:1.
There are two primary sources of differences.
The first source is how compilers deal with dead assignments. The
typical TOOL
fragment that is being memory manager friendly might perform the
following:
temp : SomeObject = new;
... // Use someObject
temp = NIL;
return;
When this is translated to C++ it looks very similar in that temp
will be assigned the
value NULL. Most compilers are smart enough to notice that 'temp' is
never used again
because the method is going to return immediately. So they skip
setting 'temp' to NULL.
In this case it should be harmless that the statement was ignored
(see next example for a different variation.) In more
complicated examples that involve loops (especially long
lived event loops) a missed NIL assignment can lead to leaking the
memory object whose
reference didn't get set to NIL (incidentally this is the type of
problem that causes
the TOOL interpreter to leak references.)
The second source is a complicated interaction caused by history of
method invocations.
Consider the following:
Method A() invokes method B() which invokes method C().
Method C() allocates a temporary TextData, invokes
SetAllocatedSize(1000000)
does some more work and then returns.
Method B() returns.
Method A() now invokes method D().
Method D() allocates something that cause the memory manager to look
for memory objects to free.
Now, even though we have returned out of method C() we have starting
invoking
methods. This causes us to use re-use portions of the C++ stack used to
maintain the history of method invocation and space for local variables.
There is some probability that the reference to the 'temporary' TextData
will now be visible to the memory manager because it was not overwritten
by the invocation of D() or anything invoked by method D().
This example answers questions of the form: Why does setting a local
variable to
NIL and returning and then invoking task.Part.Os.RecoverMemory not
cause the
object referenced by the local variable to be freed?
In most cases these effects cause memory utilization to be slightly
higher
than expected (in well behaved cases it's less than 5%.) This is a small
price to pay for the advantages of automatic memory management.
An object-oriented programming style supported by automatic memory
management makes it
easy to extended existing objects or sets of objects by composition.
For example:
Method A() calls method B() to get the next record from the
database. Method B()
is used because we always get records, objects, of a certain
type from
method B() so that we can reuse code.
Method A() enters each row into a hash table so that it can
implement a cache
of the last N records seen.
Method A() returns the record to its caller.
With manual memory management there would have to be some interface
that allows
Method A() and/or the caller of A() to free the record. This
requires
that the programmer have a lot more knowledge about the
various projects
and classes that make up the application. If freeing doesn'
happen you
have a memory leak, if you free something while its still
being used the
results are unpredictable and most often fatal.
With automatic memory management, method A() can 'free' its
reference by removing
the reference from the hash table. The caller can 'free' its
reference by
either setting the reference to NIL or getting another
record and referring
to the new record instead of the old record.
Unfortunately, this convenience and power doesn't come for free. Consider
the following,
which comes from the Forte' run-time system:
A Window-class object is a very complex beast. It is composed of two
primary parts:
the UserWindow object which contains the variables declared by the
user, and the
Window object which contains the object representation of the window
created in
the window workshop. The UserWindow and the Window reference each
other. The Window
references the Menu and each Widget placed on the Window directly. A
compound Window
object, like a Panel, can also have objects place in itself. These
are typically
called the children. Each of the children also has to know the
identity of it's
Mom so they refer to there parent object. It should be reasonably
obvious that
starting from any object that make up the window any other object
can be found.
This means that if the memory manager finds a reference to any
object in the Window
it can also find all other objects in the window. Now if a reference
to any object
in the Window can be found on the program stack, all objects in the
window can
also be found. Since there are so many objects and the work involved
in displaying
a window can be very complicated (I.E. the automatic geometry
management that
layouts the window when it is first opened or resized.) there are
potentially many
different reference that would cause the same problem. This leads to
a higher than
normal probability that a reference exists that can cause the whole
set of Window
objects to not be freed.
We solved this problem in the following fashion:
Added a new Method called RecycleMemory() on UserWindow.
Documented that when a window is not going to be used again
that it is
preferably that RecycleMemory() is invoked instead
of Close().
The RecycleMemory() method basically sets all references
from parent to
child to NIL and sets all references from child to
parent to NIL.
Thus all objects are isolated from other objects
that make up
the window.
Changed a few methods on UserWindow, like Open(), to check
if the caller
is trying to open a recycled window and throw an
exception.
This was feasible because the code to traverse the parent/child
relationship
ready existed and was being used at close time to perform other
bookkeeping
operations on each of the Widgets.
To summarize:
Automatic memory management is less error prone and more productive but
doesn't come totally for free.
There are things that the programmer can do that assists the memory
manager:
o Set object reference to NIL when known to be correct (this
is the
way the memory is deallocated in an automatic system.)
o Use methods like Clear() on Array and SetAllocatedSize()
on TextData to
that allow these objects to set their internal
references to NIL
when known to be correct.
o Use the RecycleMemory() method on windows, especially very
complicated
windows.
o Build similar type of methods into your own objects when
needed.
o If you build highly connected structures that are very
large in the
number of object involved think that how it might be
broken
apart gracefully (it defeats some of the purpose of
automatic
management to go to great lengths to deal with the
problem.)
o Since program stacks are the source of the 'noise'
references, try
and do things with less tasks (this was one of the
reasons that
we implemented event handlers so that a single task
can control
many different windows.)
Even after doing all this its easy to still have a problem.
Internally we have
access to special tools that can help point at the problem so that
it can be
solved. We are attempting to give users UNSUPPORTED access to these
tools for
Release 3. This should allow users to more easily diagnose problems.
It also
tends to enlighten one about how things are structured and/or point out
inconsistencies that are the source of known/unknown bugs.
Derek
Derek Frankforth [email protected]
Forte Software Inc. [email protected]
1800 Harrison St. +510.869.3407
Oakland CA, 94612I beleive he means to reformat it like a floppy disk.
Go into My Computer, Locate the drive letter associated with your iPod(normally says iPod in it, and shows under removable storage).
Right click on it and choose format - make sure to not have the "quick format" option checked. Then let it format.
If that doesnt work, There are steps somewhere in the 5th gen forum( dont have the link off hand) to try to use the usbstor.sys to update the USB drivers for the Nano/5th gen. -
How to set up notification email for Full CPU utilization on OEM12c?
I have found a Oracle Doc,Is that's the way email notifications are setup?How can i check that after setting the notifications?
4.1.2.3 Subscribe to Receive E-mail for Incident Rules
An incident rule is a user-defined rule that specifies the criteria by which notifications should be sent for specific events that make up the incident. An incident rule set, as the name implies, consists of one or more rules associated with the same incident.
When creating an incident rule, you specify criteria such as the targets you are interested in, the types of events to which you want the rule to apply. Specifically, for a given rule, you can specify the criteria you are interested in and the notification methods (such as e-mail) that should be used for sending these notifications. For example, you can set up a rule that when any database goes down or any database backup job fails, e-mail should be sent and the "log trouble ticket" notification method should be called. Or you can define another rule such that when the CPU or Memory Utilization of any host reach critical severities, SNMP traps should be sent to another management console. Notification flexibility is further enhanced by the fact that with a single rule, you can perform multiple actions based on specific conditions. Example: When monitoring a condition such as machine memory utilization, for an incident severity of 'warning' (memory utilization at 80%), send the administrator an e-mail, if the severity is 'critical' (memory utilization at 99%), page the administrator immediately.
You can subscribe to a rule you have already created.
From the Setup menu, select Incidents, then select Incident Rules.
On the Incident Rules - All Enterprise Rules page, click on the rule set containing incident escalation rule in question and click Edit... Rules are created in the context of a rule set.
Note: In the case where there is no existing rule set, create a rule set by clicking Create Rule Set... You then create the rule as part of creating the rule set.
In the Rules section of the Edit Rule Set page, highlight the escalation rule and click Edit....
Navigate to the Add Actions page.
Select the action that escalates the incident and click Edit...
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/notification.htm#CACHDCADMake sure you have correct thresholds...
from target home>monitoring>"Metric and Collection Settings"
Check the incident rule for warning and critical events for host targets
Setup>Incident>Incident Rules -
Material com múltipla utilização - Determinação do CFOP
Olá experts!
Gostaria de validar aqui a solução na qual chegamos para determinação automática do CFOP para material de venda para múltipla utilização.
Ocorre que na empresa em que trabalho, o mesmo produto pode ser vendido:
1) para consumo final e para revenda
2) para industrialização e para revenda.
No mestre de materiais esta configuração está na visão de Contabilidade(2) e possibilita a identificação de apenas uma utilização. Dá a impressão que a SAP espera que criemos múltiplos materiais, porém por razão de planejamento, preço e etc isto não é possível.
Se este parâmetro estivesse na visão de vendas as coisas seriam mais fáceis e lógicas a nosso ver.
Outro ponto interessante é que na J1bTax > SD > Visão SD, a utilização cliente só está como Consumo e Industrialização. Não trás revenda, porém da visão de MM a revenda é considerada.
Pergunta: O conceito deste ponto com o do mestre de materiais é o mesmo?
Como não conseguimos configurar a determinação do CFOP por estes pontos, a ainda seguindo uma solução dentro do standard, fizemos o seguinte:
1) Configuramos uma nova utilização de material: ZL01 u2013 Resale exception
2) Criamos uma nova categoria de item ZBN e associamos à utilização ZL01
3) Em localização > Determinação do CFOP incluímos a exceção para esta nova categoria de item
4) E depois de tudo isto foi possível em Cliente/Material (VD51) fazer a associação do material com esta utilização.
O problema é que isto demandará replicar um volume grande de dados, para todos os clientes que compram na exceção. E tememos que a manutenção disto no futuro não fosse 100% confiável.
Vocês indicam outra solução?
Desde já agradeço
Emerson ZaniniDeterminação de CFOP com múltipla utilização.
Boa tarde pessoal,
Tenho um problema parecido em MM.
Hora compro o material para consumo, hora compro o mesmo material para ativo.
Gostaria de saber se alguém tem uma solução para resolver esse problema.
A criação de 2 cadastros de materiais é inviável.
Att:.
Bruno Viol -
VPN IPSEC - Contabilizar a utilização
Vocês saberiam me responder como faço para contabilizar o período de utilização de uma VPN IPSEC entre dois roteadores Cisco?
Antecipadamente grata,
AlineVocês saberiam me responder como faço para contabilizar o período de utilização de uma VPN IPSEC entre dois roteadores Cisco?
Antecipadamente grata,
Aline -
Relatório de utilização do SAP por usuário
Bom dia pessoal,
Sou novo aqui no forum e tenho uma dúvida que não estou encontrando a resposta em lugar nenhum,
preciso fazer um levantamento da utilização do SAP por usuários, para realizar um limpeza, ou seja,
levantar quais usuário utilizam muito pouco o sistema.
Existe uma maneira de eu levantar quantas horas no mês cada usuário utiliza, ou então quantas vezes por dia eles entram no sistema, preciso de uma maneira de ver quem realmente utiliza o sistema.
Alguém sabe como posso ter essas informações?
Obrigado pela ajuda.Amigo, dessa forma tão especifica como você quer, eu não conheço. Porém talvez possa aparecer algum BASIS aqui e te prover outra solução.
Por ora, sem pesquisar muito o assunto e sem considerar desenvolvimentos Z, posse te recomendar como solução paliativa tentar as transações RSUSR200 e S_BCE_68002311.
Use a RSUSR200 para ver o último acesso do usuário.
A S_BCE_68002311 eu recomendaria que usasse da seguinte forma: coloque todos usuários para renovar senha em um período adequado ao teu interesse, então na S_BCE_68002311 você poderia ver quem está acessando na frequência que te interessa pois ela registra as alterações de senha.
Considere analisar com calma a transação SUIM. -
Código de utilização do material - 1 - Industrialização - 2 - Consumo
Boa tarde a todos,
Por gentileza, alguém conhece uma transação no SAP que mostre a utilização do material? exemplo
Pedido Item Utilização material
4507001234 10 1
Muito Obrigado pela atenção
Davi ParaguaiOlá Davi,
Serve consulta direto na tabela? Via SE16 ou SE16n você pode consultar na EKPO esta informação, conforme imagem abaixo
Ou diretamente no pedido, na aba Brasil (por item):
Se não for suficiente, explique melhor o seu objetivo para buscar esta informação.
Abs,
Eduardo Hartmann -
ADS service (XMLForm.exe) Utilizes 30 to 40 % of Java Stack CPU
We are currently on ECC 6 and EP 7.0; we have started using ADS service (Generating buld PDF forms) and we are noticing that it utilizes upto 30% of CPU on the Java stack.
One thing to inform is that we are using the same Java Stack for Portal, BI and R/3.
30% of CPU seems abnormal to me (At the peak of its usage the Portal Performance goes down).
Will this issue get solved if we use a dedicated Java Stack for R/3? Your Thoughts Please.
Regards,
DeepakSAP recommends very accurate (I better say pessimistic) sizing for server running productive ADS.
The best approach is to use standalone server for productive ADS usage.
IMHO, in that case you still can use the same ADS for productive, quality and even development usage.
Regards,
Petr Perstnev -
Information Broadcaster Utilizes 60 to 90 % of Java Stack CPU
We are currently on BI 7.0 and EP7.0; we have started using Information Broadcaster and we are noticing that it utilizes 60 to 90% of CPU on the Java stack.
One thing to inform is that we are using the same Java Stack for Portal, BI and R/3.
90% of CPU seems abnormal to me (At the peak of its usage the Portal Performance goes down).
Will this issue get solved if we use a dedicated Java Stack for BI? Thoughts Please.
Regards,
DeepakDeepak,
We too facing the same problem.
After proper analyzation our experts decided to go for a dedicated Java Stack for BI to increase the performance.
Regards,
Ramkumar. -
Forms 6.0 - how to have forms utilization statistics?
I would like to know how i can retrieve statistics of form utilization during one period without recompile any form. I wanna know for instance the 20 forms more used on a Oracle Forms 6.0 app. Is it possible?
thanks
Luis ReisFrank
thanks for your answer but the problem is that one . I have 800 forms and we have no time to open all them and make this script ( I am a CIO and not a tech guy so I presume that you are saying that we must write code in the Form, no?)
Luis Reis -
High CPU utilization with JDesktopPane.OUTLINE_DRAG_MODE
Hello there,
since I updated from Java SDK 1.4.0 to 1.4.1_01 I recognized a problem with MDI Java applications using a JDesktopPane with JInternalFrames. When the drag mode of the internal frames is set to OUTLINE_DRAG_MODE, which should have a better performance than the LIVE_DRAG_MODE the cpu utilization goes nearly up to 100% an the drag of the frame is quite slow.
Does anybody else experience this problem?
(The problem exists in the application I develop and also in the IDE Netbeans, I use for development)
I am not sure if this is the right place for my problem, so if there is a better one to post it to, please tell me.
Thanks
R�digerHi,
I've also noticed this. It happens on Windows 2000 with 1.4.1, but not with version 1.4.0. Have you found a solution yet?
Martin -
How do I network my MacBook Air to a PC to utilize the PC's LAN connection?
Want to connect MacBook Air (10.8) to a PC over the PC's USB port.
Need to utilize the PC's LAN connection to connect to the internet.
Not allowed to connect the MAC directly to internet via Ethernet or WiFi.
PC is allowed to be connected to netowk.This video will guide you to get the Ipad to print from a printer connected to the windows pc- http://www.youtube.com/watch?v=P_64MdjFoL0
-
Create a site utilization report for SharePoint Site with these conditions
HI,
How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report
a) The list of users who are accessing the site
b) The list of users who have not accessed the site ( Can we do some filtration based on some conditions )
c) When was the last date the user has accessed the siteHi Kalpana,
Sorry for delay in reply. I don't think this can be possible from front end without involving SQL dbo users table. If you found any other alternate please share here.
You can get site collection / sub site user details via
SP user manager tool and for last access date - time you can use SharePoint object model. - ref : http://blogs.msdn.com/b/varun_malhotra/archive/2010/05/12/moss-2007-get-last-accessed-date-for-a-site.aspx
Let us know if this helps
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful. -
CUCM 8.6(2) - High CPU utilization - CCM process
Hello,
Process name ccm is peacking 91% of CPU utilization in one of Subscribers.
On cluster there are 1 Pub, 2 Subs, and 2 TFTP.
CCM service was already restart, and Subs reload, but problem remain.
We have checked and removed association with phones not registered, but problem remain.
Proc,PID,CPU,Status,SharedMem,Nice(Level)VmRSS,VMSize,VMData,ThreadCount,DataStackSize,PageFault
ccm,32687,90,SLEEPING,87380,0,426792,605276,468544,47,418345,744
VMware Installation:
1 vCPU: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
Disk 1: 80GB
4096 Mbytes RAM
admin:show process name ccm
PID PPID TID %CPU S COMMAND
32687 1 32687 0.0 S ccm
32687 1 19549 0.0 S ccm
32687 1 19570 0.0 S ccm
32687 1 19639 0.0 S ccm
32687 1 20057 0.0 S ccm
32687 1 20331 0.0 S ccm
32687 1 20332 0.0 S ccm
32687 1 20333 0.0 S ccm
32687 1 20354 0.0 S ccm
32687 1 20360 0.0 S ccm
32687 1 20361 0.0 S ccm
32687 1 23336 0.0 S ccm
32687 1 23337 0.0 S ccm
32687 1 23338 0.0 S ccm
32687 1 23339 1.0 S ccm
32687 1 23340 0.1 S ccm
32687 1 23341 0.2 S ccm
32687 1 23342 0.0 S ccm
32687 1 23349 0.0 S ccm
32687 1 23988 0.0 S ccm
32687 1 23989 21.6 S ccm
32687 1 23990 0.7 S ccm
32687 1 24013 0.0 S ccm
32687 1 24043 0.0 R ccm
32687 1 24044 0.0 S ccm
32687 1 24045 0.0 S ccm
32687 1 24046 0.0 S ccm
32687 1 24047 0.0 S ccm
32687 1 24048 0.7 R ccm
32687 1 24049 0.2 S ccm
32687 1 24050 0.1 R ccm
32687 1 24051 0.0 S ccm
32687 1 24052 0.0 S ccm
32687 1 24053 0.0 S ccm
32687 1 24054 0.0 S ccm
32687 1 24091 0.0 S ccm
32687 1 24092 0.0 S ccm
32687 1 24093 0.0 S ccm
32687 1 24181 0.0 S ccm
32687 1 24182 0.0 S ccm
32687 1 24192 0.0 S ccm
32687 1 24277 0.1 S ccm
32687 1 24278 0.0 S ccm
32687 1 24279 0.0 S ccm
32687 1 24280 0.0 S ccm
32687 1 24281 0.0 S ccm
32687 1 24282 0.0 S ccm
admin:
Are there any specific tests, or logs prior to isolate this issue?Hi,
A few points:
> Use one of the recommended OVA templates
> Check if the spike is random or occurs at a specific time. If it occurs at a specific time it could be coinciding with something like DRS backup, CDR load, busy hours etc.
> Minimum set of logs needed for one such high CPU spike instance are:
Detailed ccm traces from all nodes
RisDC Perfmon logs
Proglogs
Also, capture the output of the following:
utils diagnose test
utils core active list
show process load
HTH
Manish -
Report on Cost And Utilization in PM Module
Hi Experts,
I want some help in generating a report called Cost And Utilization in PM Module.
Any body can help me with some documents or if any body created same kind of report in Pm just do provide me some details on how create the report.
The requirement of this report is as follows,
This Report is generated from the service order or the notification which ever is latest on the equipment in the date range given by the user.
In Report I want to calculate the field Estimated Hours.The main problem we are having here is the Hour Meter infobject is of Type characteristic it is not key figure.
Based on the User input Date range the Estimated Hours calculation needs to be done.The Estimated Hours are calculated from Estimated Hours Begin and Estimated Hours End.
For calculating the Begin and End Hours we need to have some fields.The fields required for calculating the Begin and End are,
Initial Hour Meter,Adjusted Hour Meter,Fleet Management Date these three fields are picked from the Equipment Master data for a particular Equipment and the Hour Meter Reading is the latest Meter Reading of the equipment it is populated from the Service Order or Notification which ever is latest in the date ange given by user.
There are some conditions in calculating the Hour Meter Reading Begin and End.
If the Fleet Management Date (Start-up Date on EM) started before the input date Date Range (From-Date), calculate the average usage (in hours) based on the initial hours and
If the Fleet Management Date started after the From-Date, use the Hour Meter (EM) as the Estimated Hours Begin.
If the last PMN (or SO) fell short of the Date Range (To-Date), obtain the Estimated Hours End by applying the average usage to fill the time-gap.
If the last PMN (or SO) fell after the Date Range (To-Date), get the Estimated Hours End by getting the next to last PMN performed inside the window parameter,
Adjusted Hours, if not zero or null, needs to be added to the Ending Hours to achieve the real number.
The example for calculating the above requirement is below,
User Input Date Range: Jan. 1, 2006 - Dec. 31, 2006
Initial Hour (Equipment Master): 10
Adjusted Hours (Equipment Master): 0
Fleet Management Date (Equipment Master): Dec. 1, 2005
1st PM Notification (Feb. 1, 2006): 410
Last PM Notification (Feb. 1, 2007): 2810
Second to last PMN (Dec. 1, 2006): 2410
Equipment was put into service (12/1/05) before the Date Range, needs to find the Estimated Hours Begin.
The first PM was performed (2/1/06) exactly two months from in-service date (12/1/05).
Average monthly usuage from first PMN = (410 - 10) / 2 = 200
Estimated Hours Begin = 200 + 10 = 210 (estimated Hour Meter Reading on Jan. 1, 2006)
Average monthly usuage from the last 2 PMN = (2810 - 2410) / 2 months = 200
Estimated Hours End = 2410 + 200 + 0 (adjusted hours) = 2610 (estimated Hour Meter Reading on Dec. 31, 2006)
Estimated Hours Total = 2610 - 210 = 2400
If you have any queries regarding the requirement just let me know i will let you know.
Thanks in advance
BobbyMahee,
We have maintained all personnel no of the employess working under a particular Maint.Work center in HRMS tab. Employee master data for all Infotypes are maintained in Personnel Management in HR module. So wen the Employee enters Time details of his working hours per day, he has to mention the maintenance order Or it is like a standing order on the time sheet per line item. Wen transfer of working hours will be done on a particular order the entire cost will be reflected in Cost tab page. Since me have maintained different Activity type/Activity price per employee I am confused about the flow of cost...
Ur suggestions were valuable.... hope to get some more clearity...
Maybe you are looking for
-
How do I not let certain users run an installed application?
I have a computer lab at a school that is running Snow Leopard and a Snow Leopard server. Is there a way in Workgroup Manager to disallow the student group from running an installed application? I know that I can "always allow" all the rest of the
-
Profit Center is not updating in Vendor line item
Hi Experts, For my GL postings in F-43, F-41, F-53 ,F-54 and F-28 the 1st line item corressponds to Vendor or Customer, the profit center is not updaitng the values and shows nill. We have given check in Exit and Substitution but its not updating in
-
Apple has the best devices and software in today's ICT scape. Sadly, people in my University hardly use them. For some time now I have been teaching and sensitizing members of my university community, mostly professors and lecturers to use Apple devi
-
How to re-install Yosemite without external hard drive?
My rMBP has been having battery issues the last couple of months, and I believe that it's due to my installation of Yosemite. I'd like to do an fresh install of it, but I don't have enough money to buy an external hard drive for Time Machine. What
-
SP3 install causes error in WL Commerce Server
Hi Support, After we installed SP3 for our Weblogic Server and Commerce Server, our Example portal failed at the login step with the following error on html page: Error 500--Internal Server Error From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1: