Utilizing the Workspace for end users
Trying to see how can I utilize the existing workspace for "end users" who are supposed to access the application, I have two questions:
1- How to remove the extra regions, logos and etc.
2- How to add link to the application
Thanks,
Mehr
I'm not clear on your question, but I'm going to take a wild stab in the dark and think you would like to customise the workspace login
http://www.grassroots-oracle.com/2013/02/modifying-apex-workspace-login-page.html
Why not provide them the appropriate URL in the first place?
Similar Messages
-
I patched 2012 to the SP1 level and now I'm getting these warnings on many servers.
It seems to be considering these items as removable media?
DPM 2012, SP1, version 4.1.3313.0
Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
Affected area: skutter.pmuk.net
Occurred since: 11/01/2013 09:04:43
Description: Failed to update permissions used for end-user recovery on skutter.pmuk.net. Permissions update failed for the following reason: (ID 3123)
DPM is unable to enumerate contents in 2aad3f75a7e54a0f91b640d7f158f00a , 5702fef3756e4ca8af0554013951f32d , 78f9e6070fbd43aeb328700a88a3c926 , aquaria.pmuk.net_MTATempStore$ , ariel.pmuk.net_MTATempStore$ , atlantis.pmuk.net_downloads , atlantis.pmuk.net_MTATempStore$
, atlantis.pmuk.net_print$ , capricorn.pmuk.net_MTATempStore$ , CCM.pmuk.net_IvrDirectory , CCM.pmuk.net_MTATempStore$ , CHIRON.pmuk.net_MTATempStore$ , cpeserv-i03.pmuk.net_IMAGING , defiant.pmuk.net_idsc , defiant.pmuk.net_MTATempStore$ ,firebird.pmuk.net_Accts_serve
, firebird.pmuk.net_case , firebird.pmuk.net_Control ,firebird.pmuk.net_Fuel Cell , firebird.pmuk.net_HADCAD , firebird.pmuk.net_haddesign , firebird.pmuk.net_hadendurancelab , firebird.pmuk.net_HADEngCad , firebird.pmuk.net_HADPCLGainspeed ,firebird.pmuk.net_HADPCLProjects
,firebird.pmuk.net_HADPCLQuality , firebird.pmuk.net_HADPCLStandards , firebird.pmuk.net_hrXerox , firebird.pmuk.net_hs , firebird.pmuk.net_ITXerox , firebird.pmuk.net_JunHigashimura , firebird.pmuk.net_MTATempStore$ ,firebird.pmuk.net_office ,firebird.pmuk.net_OMPM
, firebird.pmuk.net_Outplacement ,firebird.pmuk.net_personal , firebird.pmuk.net_PJSESCANNER ,firebird.pmuk.net_pmuk ,firebird.pmuk.net_pwa ,firebird.pmuk.net_pwa2 , firebird.pmuk.net_scanfret ,firebird.pmuk.net_Siebel8 ,firebird.pmuk.net_Spares
,firebird.pmuk.net_test ,firebird.pmuk.net_TVDC ,firebird.pmuk.net_xeroxcpe$ ,firebird.pmuk.net_xeroxrd$ , HALLEY.pmuk.net_MTATempStore$ ,legion.pmuk.net_dfs ,legion.pmuk.net_MTATempStore$ , legion.pmuk.net_NETLOGON ,legion.pmuk.net_SYSVOL
, nemesis.pmuk.net_KEvin ,nemesis.pmuk.net_MTATempStore$ , PLEIDES.pmuk.net_Archive , PLEIDES.pmuk.net_DGHOME , PLEIDES.pmuk.net_MTATempStore$ ,PLEIDES.pmuk.net_print$ , roosevelt.pmuk.net_ARCserve$ ,roosevelt.pmuk.net_CHEYALERT$ , roosevelt.pmuk.net_HADQCEOLP
,roosevelt.pmuk.net_home3 , roosevelt.pmuk.net_MTATempStore$ ,roosevelt.pmuk.net_smssource , roosevelt.pmuk.net_WindowsEasyTransfer ,roosevelt.pmuk.net_XeroxScan , sagittarius.pmuk.net_MTATempStore$ ,sagittarius.pmuk.net_print$ , sakura.pmuk.net_MTATempStore$
,scorpia.pmuk.net_MTATempStore$ ,scorpion.pmuk.net_chandleram, scorpion.pmuk.net_Control ,scorpion.pmuk.net_CPE ,scorpion.pmuk.net_Digital ,scorpion.pmuk.net_Electrical , scorpion.pmuk.net_MTATempStore$ , scorpion.pmuk.net_NASUtils ,scorpion.pmuk.net_Personal
,scorpion.pmuk.net_QA ,scorpion.pmuk.net_QC , scorpion.pmuk.net_Technical , silverberg.pmuk.net_dfs ,silverberg.pmuk.net_MTATempStore$ ,silverberg.pmuk.net_NETLOGON , silverberg.pmuk.net_SYSVOL ,skutter.pmuk.net_dfs , skutter.pmuk.net_MTATempStore$ ,skutter.pmuk.net_NETLOGON
,skutter.pmuk.net_sharepoint-saver ,skutter.pmuk.net_SYSVOL , tempest.pmuk.net_MTATempStore$ , tempest.pmuk.net_Quarantine ,tempest.pmuk.net_SiteBackups , tempest.pmuk.net_tsdp , titania.pmuk.net_MTATempStore$ , valiant.pmuk.net_domino , valiant.pmuk.net_hadprod
, valiant.pmuk.net_MTATempStore$ ,valiant.pmuk.net_oracle ,vindaloo.pmuk.net_MTATempStore$ , virgon.pmuk.net_faxclient ,virgon.pmuk.net_FxsSrvCp$ ,virgon.pmuk.net_MTATempStore$ , xavier.pmuk.net_Address ,xavier.pmuk.net_downloads ,xavier.pmuk.net_drivers ,
xavier.pmuk.net_Exchange IS Starter ,xavier.pmuk.net_ExchangeOAB , xavier.pmuk.net_ExchangeUM , xavier.pmuk.net_MTATempStore$ , xavier.pmuk.net_out-arch , xavier.pmuk.net_Resources$ on the protected computer tower.pmuk.net. Recycle Bin, System Volume Information
folder, non-NTFS volumes, DFS links, CDs, Quorum Disk (for cluster) and other removable media cannot be protected. (ID 38 Details: )
Any Ideas? backups are OK, recovery points/sync's etc.
Mark.I am using DPM 2012 R2, what finally worked to me to resolve my problem with EUR was to:
In DPM I disabled EUR
In Computer Management delete all DPM Shares (\\?\c:\Program Files\...)
Using ADSI edit go to CN=MS-ShareMapConfiguration,CN=System,DC=X,DC=Y (Replace X & Y for your domain)
Delete all of the mappings within the container
In DPM enable EUR
In DPM on a protection group I created a new recovery point and selected “Only synchronize (available only for file data)”
Related article on ADSI Edit and DPM -
http://social.technet.microsoft.com/Forums/en-US/e0258384-8422-408c-8839-2580d616a9ec/edsi-edit-related-to-data-protection-manager?forum=dpmfilebackup
I hope this helps
JD Young -
NPS: Event 6274 - Network Policy Server discarded the request for a user
Intermittently I will get desktop (wired) and laptop (wireless) computers experiencing issues with NPS (they drop off the network).
Some computers are affected more than others, although they are identical hardware and based on a standard image.
In the event log of the NPS servers I can see the following messages:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 2/05/2014 8:47:58 a.m.
Event ID: 6274
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NT147.domain.local
Description:
Network Policy Server discarded the request for a user.Contact the Network Policy Server administrator for more information.User:
Security ID: NULL SID
Account Name: host/DPC0387.domain.local
Account Domain: DOMAIN
Fully Qualified Account Name: DOMAIN\DPC0387$Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 3c-xx-xx-xx-xx-xx
Calling Station Identifier: 00-xx-xx-xx-xx-xxNAS:
NAS IPv4 Address: 10.nnn.nnn.nnn
NAS IPv6 Address: -
NAS Identifier: ND246
NAS Port-Type: Ethernet
NAS Port: 71RADIUS Client:
Client Friendly Name: Network Device Management Subnet
Client IP Address: 10.nnn.nnn.nnnAuthentication Details:
Connection Request Policy Name: NAP 802.1X (Wired)
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: NT147.domain.local
Authentication Type: -
EAP Type: -
Account Session Identifier: 384F322E317838316564303034313030306230666632
Reason Code: 1
Reason: An internal error occurred. Check the system event log for additional information.
How do I debug when an internal error occurs but there is nothing in the system event log? Where else can I look?
Here's the packet trace that matches the event log entry above:
No. Time Source Destination Protocol Length Time from request Info
1 0.000000 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
2 2.470423 Universa_xx:xx:xx Nearest EAPOL 60 Start
3 2.472870 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
4 2.539416 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
5 2.544206 Universa_xx:xx:xx Nearest EAPOL 60 Start
6 2.548804 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
7 2.550050 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
8 2.552597 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=249, l=208)
9 2.556043 10.NPS_Server 10.switch RADIUS 136 0.003446000 Access-Challenge(11) (id=249, l=90)
10 2.565876 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
11 2.569472 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=250, l=208)
12 2.572566 10.NPS_Server 10.switch RADIUS 136 0.003094000 Access-Challenge(11) (id=250, l=90)
13 2.580254 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
14 2.586544 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
15 4.564841 Universa_xx:xx:xx Nearest EAPOL 60 Start
16 4.568530 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Identity
17 4.569876 Universa_xx:xx:xx Nearest EAP 60 Response, Identity
18 4.582263 10.switch 10.NPS_Server RADIUS 254 Access-Request(1) (id=252, l=208)
19 4.586006 10.NPS_Server 10.switch RADIUS 136 0.003743000 Access-Challenge(11) (id=252, l=90)
20 4.591896 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Request, Protected EAP (EAP-PEAP)
21 4.592692 Universa_xx:xx:xx Nearest TLSv1 123 Client Hello
22 4.599634 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=253, l=315)
23 4.600887 10.NPS_Server 10.switch IPv4 1518 Fragmented IP protocol (proto=UDP 17, off=0, ID=07db)
24 4.609920 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 1514 Server Hello, Certificate, Certificate Request, Server Hello Done
25 4.610516 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
26 4.617407 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=254, l=216)
27 4.618352 10.NPS_Server 10.switch RADIUS 288 0.000945000 Access-Challenge(11) (id=254, l=242)
28 4.623650 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 176 Server Hello, Certificate, Certificate Request, Server Hello Done
29 4.643316 Universa_xx:xx:xx Nearest TLSv1 361 Certificate, Client Key Exchange, Change Cipher Spec, Encrypted Handshake Message
30 4.649607 10.switch 10.NPS_Server RADIUS 601 Access-Request(1) (id=255, l=555)
31 4.656950 10.NPS_Server 10.switch RADIUS 199 0.007343000 Access-Challenge(11) (id=255, l=153)
32 4.662734 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 87 Change Cipher Spec, Encrypted Handshake Message
33 4.681106 Universa_xx:xx:xx Nearest EAP 60 Response, Protected EAP (EAP-PEAP)
34 4.788536 10.switch 10.NPS_Server RADIUS 262 Access-Request(1) (id=2, l=216)
35 4.789735 10.NPS_Server 10.switch RADIUS 173 0.001199000 Access-Challenge(11) (id=2, l=127)
36 4.795723 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 61 Application Data
37 4.796372 Universa_xx:xx:xx Nearest TLSv1 93 Application Data
38 4.802368 10.switch 10.NPS_Server RADIUS 331 Access-Request(1) (id=3, l=285)
39 4.803363 10.NPS_Server 10.switch RADIUS 189 0.000995000 Access-Challenge(11) (id=3, l=143)
40 4.808905 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
41 4.809501 Universa_xx:xx:xx Nearest TLSv1 77 Application Data
42 4.817342 10.switch 10.NPS_Server RADIUS 315 Access-Request(1) (id=4, l=269)
43 4.822986 10.NPS_Server 10.switch RADIUS 189 0.005644000 Access-Challenge(11) (id=4, l=143)
44 4.828973 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
45 4.833318 Universa_xx:xx:xx Nearest TLSv1 829 Application Data
46 4.840610 10.switch 10.NPS_Server RADIUS 1073 Access-Request(1) (id=5, l=1027)
47 4.845946 10.NPS_Server 10.switch RADIUS 189 0.005336000 Access-Challenge(11) (id=5, l=143)
48 4.850938 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 77 Application Data
49 4.907924 Universa_xx:xx:xx Nearest TLSv1 141 Application Data
50 4.913390 10.switch 10.NPS_Server RADIUS 379 Access-Request(1) (id=6, l=333)
51 4.917535 10.NPS_Server 10.switch RADIUS 221 0.004145000 Access-Challenge(11) (id=6, l=175)
52 4.922877 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 109 Application Data
53 4.923472 Universa_xx:xx:xx Nearest TLSv1 61 Application Data
54 4.930319 10.switch 10.NPS_Server RADIUS 299 Access-Request(1) (id=7, l=253)
55 4.937348 10.NPS_Server 10.switch RADIUS 381 0.007029000 Access-Challenge(11) (id=7, l=335)
56 4.942543 JuniperN_xx:xx:xx Universa_xx:xx:xx TLSv1 269 Application Data
57 4.944791 Universa_xx:xx:xx Nearest TLSv1 125 Application Data
58 4.951408 10.switch 10.NPS_Server RADIUS 363 Access-Request(1) (id=8, l=317)
59 4.954022 10.NPS_Server 10.switch RADIUS 355 0.002614000 Access-Accept(2) (id=8, l=309)
60 4.981482 JuniperN_xx:xx:xx Universa_xx:xx:xx EAP 60 Success
61 32.590347 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
62 62.592420 10.switch 10.NPS_Server RADIUS 361 Access-Request(1) (id=251, l=315)
63 92.595043 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
64 122.597856 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)
65 152.600618 10.switch 10.NPS_Backup_Server RADIUS 361 Access-Request(1) (id=9, l=315)A belated thanks for your reply.
Our environment doesn't have NPS accounting configured so that was easy to rule out.
The mid-day drop outs have stopped after I added "set protocols dot1x authenticator no-mac-table-binding" to our Juniper switches (which prevents mac address aging from clearing the active dot1x client session).
I believe the above error message occurs because the RADIUS session ID is rejected / ignored because of some quirks in the RADIUS standard. At the start of a dot1x authentication request a RADIUS session ID is created. For whatever reason the
RADIUS/NAP server stops responding and the Juniper switch fails over to the backup RADIUS/NAP server configured. The session ID is kept (per RADIUS standard) but the backup RADIUS/NAP server doesn't know about the session, so this event: "Network
Policy Server discarded the request for a user." occurs.
It would be nice to see a clearer error message "Invalid RADIUS session" or similar.
There is a Microsoft guide on how to set up RADIUS/NAP servers in a highly available configuration - something to do with RADIUS proxy servers.
It would be even nicer to see some kind of RADIUS session synchronisation between NAP servers... if it doesn't already exist?
I am having the same exact issue you posted on here except I have Extreme Network switches. Some of my computers, various hardware, will randomly not authenticate during re-authentication. The switch says that it failed to contact the NPS server so then it
switches to my backup server. The client has a random time on how long it waits to authenticate so sometimes I end up having the disable/re-enable the port they are connected to so that the session is started again. I see that you basically removed the option
to force clients to re-authenticate Any downfall disabling that?. Any idea why the NPS server is no longer responding? Are you using Windows Server 2012? -
Recording NWBC scripts for End User Experience
Hi Experts,
I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording the script. We only have option to "Close all session and LogOff" in NWBC client .
When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
Please help me achieve this.
Regards,
Manish KHi,
for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
Maybe a similar strategy works for NWBC.. but I don't know the UI in detail. -
Reset passwork for end user using XE version 2.1.0.00.39
Hi All,
I would like to create a link "Change Password" for end users to able to change their password anytime. I've followed the link below
Self Reset Password
but it still require the admin login before end users can change their password.
The following steps that I did:
1. Under "Shared Components", create a Navigation Bar entry name "Change Password".
2. On page 1, click on the "Change Password" link under Navigation Bar and entered
Target Type = URL
URL Target = javascript:popupURL('f?p=4350:53:&SESSION.:::53.F4350_P53_USER_NAME::APP_USER');
How do i make the "Change password" link go directly to reset password page after end users clicked on it without admin login require? I'm using a default authentication and all end users assigned to user group.
Thanks in advance,
KevinKevin,
You want the users to go to popup page 58 (in application 4350). See this thread: Re: Pop Up Change Password Window . But I don't know if that will work in 2.1.
In general, you're better off using other types of account management tools such as LDAP.
Scott -
Page customization for end user
is it possible to use other mechanism for end users to customize their own pages instead using the portal features since it's a little complicated cause each user needs to create new pages, add portlet, etc.
Can we use the mechanism like my cnn, my yahoo,excite and how to do that in a simple way?
thanks for helpingHi,
I have the same question, but I would like to have a seperate page or application, showing only predetermined portlets, for users to choose from and place on their page. I do not want the end user to ever see the customization process Oracle uses. Can this be done???
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Karthika Siva ([email protected]):
A simple way to do this:
1. Create a page that will become the default page for end users. This page will have your branded look & feel (style) and contain a default set of portlets. These are portlets that you think your typical user will find useful.
2. Create portal user.
3. Grant one of the following privileges on the page to the user. Grant 'Full Customization' or 'Add Only Customization' depending on how much control you want to give the end user. Keep in mind that both of these privileges allow the end user to only customize their PRIVATE VERSION of the page. Others will see the default, or their own version if they have also personalized it. See the online help on the Access tab of the Customize Page screen for a description of the privileges.
4. Once that is done, set this page as the default home page for the user. You can do this using the Preferences tab on the edit user screen.
Now the portal user can log into the portal, and personalize his/her page by customizing portlets on the page, hiding/showing default portlets, and even adding other portlets to the page.<HR></BLOCKQUOTE>
null -
Afternoon all, i've recently installed cProjects as a add on to a WEBAS system, i'm after some useful links/information about how to use the product at all, as i've no real experience of it.
Any help would be much appreciated, the SAP guides don't seem to be suited for end users thats all....Hello James,
From your post I cannot make out which release of cProjects have you installed (3.1 or 4.0). Any way pl find below the links to the help.sap.com portal which is a detailed guide to cProjects Suite.
cProjects Suite 3.1
http://help.sap.com/saphelp_cpro31/helpdata/en/home.htm
cProjects Suite 4.0
http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
Hope this helps.
Rgds
Deepak -
SCSM 2012 SSP Permission for End users
Hello Experts,
I have an issues with SSP - SCSM 2012 SP1.
As an admin user, I can see theOfferings, see the pending requests, can see the requests I have submitted, Approve them etc. But when I am an end user, browsing from my laptop, I see a blank Home page. I dont see the Service offerings in the
homepage..even I dont see the Need Help? text. What is the issue? FYI : Silver light is already installed on my laptop.
Interestingly, I see the Need Help? text with the same end user credential when I am opening the browser inside the server wher SSP is installed.
But, in both the cases, whether I browse in the server or from my laptop, I dont see the service offerings anywhere when i am an end user. I followed the below article..but no success.. :(
http://systemcentertech.com/2012/06/28/scsm-2012-portal-service-catalog-empty-for-end-users/
Please help...
Thanks!
ThanksHi,
Did you add the Service Offerings and Request Offerings to the Catalog Group? Here is another good blog on this you can reference:
http://www.concurrency.com/blog/scsmportalpermisions/
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing! -
Applet Debugging Option for End Users
Users in our 12.0.4 development system that only have the 'xMII Users' role can see and use the 'Applet Debugging' option under the System Management menu. I'd prefer them to only have the options under the Support menu.
I'm puzzled why this one option is availble for end users. What am I missing?
David MacindoeWhat am I missing?
I guess nothing.
Its just that it is designed this way. Moreover the option is harmless from a Security point of view.
May be you will find this 'fixed' in later versions. -
How do enter the adobe pdf end user liscense agreement?
i do not know how to look for the adobe pdf end user liscense agreement?
help?Depending on which Adobe application you are using, the EUA will vary somewhat
and there are several applications that handle PDF products, Adobe Reader is one.
You could check into the results linked here that show several end-user-agreements
with Adobe over a few product lines; to see what may apply to whatever you're using.
•Adobe pdf end user agreement -- google results link:
https://www.google.com/?gws_rd=ssl#q=Adobe+pdf+end+user+license+agreement
In the open application, near where the name of the product appears, you should be
able to check into such places as "about Adobe..." when you click on the Name.
Since I only have Adobe Reader, not any of their retail application programs, what
little that tells me may not be anywhere near enough to answer your open question.
In Adobe Reader, if it were not to work on initial installation, I'd likely have to open the
application from its location in the Applications folder (in Adobe reader folder) and then
agree to the terms of the EUA in a small window that would appear at that point... and
after that any use of the Reader should simply be almost automatic if another application
sends a PFD request for the Reader to run and let me read content. Mine is set to not
do anything automatically, for security purposes, though. Hope the search links help.
Good luck & happy computing! -
Training Material for end-users
Hi SAP Gurus,
I need to prepare a Online Quick Reference (OLQR)/questionnaire/FAQ's (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM), for the end-users, which they will refer to after Go-Live.
I also need to prepare training material for end-users for (SAP R/3 4.7 -FICO and integration of FI-SD & FI-MM),to be used during the training session's prior to Go-Live.
I would appreciate, if someone could please send me project documents related to the same on my email id [email protected]
This is very urgent and I have to complete the documents ASAP, so please reply at the earliest.
Thank you all in advance.
-- SJ
nullHi Ravi,
Thanks alot for your help.
But, I was looking for some Project documents that I can refer to for preparing Training Material and questionnaire/FAQ's/online documents (SAP R/3 4.7 -FICO, SD & MM) for the end-users, which they can refer to after Go-Live.
It would be great, if you could please send me some project documents on my email id: [Email removed by moderator]
Thanks,
--SJ
Message was edited by:
Mario Herger -
I have a requirement to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages for some of the users and allow the access for some of the users.
I have applied the below code on the web.config file but this modification impacting only on the web application level not on the site collection and sub site level.
<location path="_layouts/15/InPlaceRecordsSettings.aspx">
<system.web>
<authorization>
<deny users="*" />
</authorization>
</system.web>
</location>
<location path="_layouts/15/InPlaceRecordsListSettings.aspx">
<system.web>
<authorization>
<deny users="*" />
</authorization>
</system.web>
</location>
When I tried the access on
:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx">http://<servername>:<portno>/sites/<scname>/_layouts/15/InPlaceRecordsSettings.aspx page allowed the access for all users.
Please suggest the possible solution to restrict the access of "InPlaceRecordsListSettings.aspx" and "InPlaceRecordsSettings.aspx" pages on SharePoint2013.
Thanks
RamasubbuYou can't do it from OOTB.
_layout folder is accessible to the users if they have read access in any of the site even subsite.
You can modify *.aspx file, add your custom control which will check user.
[custom.development] -
What is the password for 'oracle' user created during XE installation?
Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
NHi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N -
Seeding the cache for all users
We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ?We are facing some performance issues (even after using aggregate tables) and are looking into seeding the cache for all users so that the dashboard pops up immediately.
So far I couldn't make it work. As Administrator I created an iBot to run a report for 1 month (dashboard has a dashboard prompt on the period) with Data Visibility set to 'Personalized (individual data visibility)' as I understood from the manual this is the way to seed the cache for all users. Now when I log on with my personal userid and set the prompt value to that specific period it is not using the cache.
Obviously destination was set to 'Oracle BI Server Cache' and cache has been turned on.
Does anyone have any suggestions ? -
GLOBAL TEMPORAY TABLE with the ability for a user to see others's entries
I have a list of record available for many user at the same time for them to work on.
Every one has the tendency to chosse the first record...
I want each of the users to be able to chose a different record once the preceding record has been selected by another user.
It would have been somthing like a GLOBAL TEMPORAY TABLE but with the ability for every user to see others records
so I would do and anti-join...
Does anyon have an idea on how I could implement such a behavior?You will not be able to use a global temporary table for such a requirement.
It sounds like you will need a permanent table, which you will need to lock certain records (prohibiting users from taking those already in use), you can look at using the DBMS_LOCK package for this.
That's just speculation based on what you've typed, if you provide more details you make get more specific help.
Maybe you are looking for
-
So my phone got damaged and I sent it for repair. This is not the issue. Meanwhile, I'm using my Dad's previous iPhone 4. I placed the SIM card in and used a carrier app to transfer all my contacts. After my contacts replaced the one on my Dad's prev
-
How can i make this stored procedure work
Im using MSSQL 2000 im trying to write a stored procedure which first checks if a certain day is already stored if not store the day and the owner and return something to show if it was stored or not create procedure dbo.pickDay @day datetime, @owner
-
Different Unit of weight, Delivery KG and LB
Hi all, we're working with a material master record within several countries. Managed and also used in Europe. So MARA-GEWEI is posted with KG, therefore the sales order and at the end the delivery refers to this weight unit. Our US friends using a s
-
Query regarding file content conversion using file adapter
Hi All I have a question regarding file content conversion in file adapter. I have a file coming in the following format. AA,111,222,333 BB,444,555,666 CC,777,888,999 My incoming message structure has a hierarchy. The CC record is a structure part of
-
IPhoto will not load with old library
Help! When I try to open iPhoto, the white box appears (with no albums or icons), the wheel never stops spinning, and I have to force quit. When I created a new library, it worked perfectly fine, so i think it's the old library thats messed up. I hav