Utl_smtp.data ORA-06502: PL/SQL: numeric or value error
Hi there,
I am using utl_smtp to send a HTML email, I am passing in a clob to utl_smtp.data(), works fine for some relativley small emails nut not larger ones, which return the following error
ORA-06502: PL/SQL: numeric or value error
Anybody know what the limitation is on the size if the body paramater to utl_smtp.data(), and is there an alternative way of sending big emails?
Thanks...
Hi Aparm,
What is that big mail ? What data you sent in mail..
If you Sent the Table data, then you can divide it into small chunks and give it to utl_smtp.data().
And, I think the size of the utl_smtp.data() for varchar2 Type that can be assgined is 32767 .
Thanks,
Shankar
Similar Messages
-
UTL_SMTP , ORA-06502: PL/SQL: numeric or value error
Hi there,
I have a procedure that sends emails using UTL_SMTP. It is showing the "ORA-06502: PL/SQL: numeric or value error" whenever the message spans over the limit of the varchar2 type (32'767). I want to send in one email more than that limit, is there a way? any help?
Thanks in advancetry this procedure... it works to me!!
create or replace procedure po8.mail_files ( from_name varchar2,
to_name varchar2,
subject varchar2,
message varchar2,
max_size number default 9999999999,
filename1 varchar2 default null,
filename2 varchar2 default null,
filename3 varchar2 default null,
debug number default 0 ) is
This procedure uses the UTL_SMTP package to send an email message.
Up to three file names may be specified as attachments.
Parameters are:
1) from_name (varchar2)
2) to_name (varchar2)
3) subject (varchar2)
4) message (varchar2)
5) max_size (number)
5) filename1 (varchar2)
6) filename2 (varchar2)
7) filename3 (varchar2)
eg.
mail_files( from_name => 'oracle' ,
to_name => '[email protected]' ,
subject => 'A test',
message => 'A test message',
filename1 => '/data/oracle/dave_test1.txt',
filename2 => '/data/oracle/dave_test2.txt');
Most of the parameters are self-explanatory. "message" is a varchar2
parameter, up to 32767 bytes long which contains the text of the message
to be placed in the main body of the email.
filename{1,2,3} are the names of the files to be attached to the email.
The full pathname of each file must be specified. The files must exist
in one of the directories specified in the init.ora parameter
UTL_FILE_DIR. All filename parameters are optional: It is not necessary
to specify unused file parameters (eg. filename3 is missing in the above
example).
The max_size parameter enables you to place a constraint on the maximum
size of message, including all attachments, that the procedure will send.
If this limit is exceeded, the procedure will truncate the message at
that point with a '*** truncated ***' message. The default is effectively
unlimited. However, the text of message body is still limited to 32Kb, as
it is passed in as a varchar2.
Obviously, as with any Oracle procedure, the parameter values can (and
usually will be) PL/SQL variables, rather than hard-coded literals, as
shown here.
Written: Dave Wotton, 14/6/01 (Cambridge UK)
This script comes with no warranty or support. You are free to
modify it as you wish, but please retain an acknowledgement of
my original authorship.
Amended: Dave Wotton, 10/7/01
Now uses the utl_smtp.write_data() method to send the message,
eliminating the 32Kb message size constraint imposed by the
utl_smtp.data() procedure.
Amended: Dave Wotton, 20/7/01
Increased the v_line variable, which holds the file attachment
lines from 400 to 1000 bytes. This is the maximum supported
by RFC2821, The Simple Mail Transfer Protocol specification.
Amended: Dave Wotton, 24/7/01
Now inserts a blank line before each MIME boundary line. Some
mail-clients require this.
Amended: Dave Wotton, 4/10/01
Introduced a 'debug' parameter. Defaults to 0. If set to
non-zero then errors in opening files for attaching are
reported using dbms_output.put_line.
Include code to hand MS Windows style pathnames.
You may need to modify the following variable if you don't have a local
SMTP service running (particularly relevant to Windows 2000 servers).
Refer to http://home.clara.net/dwotton/dba/oracle_smtp.htm for more
details.
v_smtp_server varchar2(20) := 'doc148.xtec.es';
v_smtp_server_port number := 25;
v_directory_name varchar2(100);
v_file_name varchar2(100);
v_line varchar2(1000);
crlf varchar2(2):= chr(13) || chr(10);
mesg varchar2(32767);
conn UTL_SMTP.CONNECTION;
type varchar2_table is table of varchar2(200) index by binary_integer;
file_array varchar2_table;
i binary_integer;
v_file_handle utl_file.file_type;
v_slash_pos number;
mesg_len number;
mesg_too_long exception;
invalid_path exception;
mesg_length_exceeded boolean := false;
begin
-- first load the three filenames into an array for easier handling later ...
file_array(1) := filename1;
file_array(2) := filename2;
file_array(3) := filename3;
-- Open the SMTP connection ...
conn:= utl_smtp.open_connection( v_smtp_server, v_smtp_server_port );
-- Initial handshaking ...
utl_smtp.helo( conn, v_smtp_server );
utl_smtp.mail( conn, from_name );
utl_smtp.rcpt( conn, to_name );
utl_smtp.open_data ( conn );
-- build the start of the mail message ...
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: ' || from_name || crlf ||
'Subject: ' || subject || crlf ||
'To: ' || to_name || crlf ||
'Mime-Version: 1.0' || crlf ||
'Content-Type: multipart/mixed; boundary="DMW.Boundary.605592468"' || crlf ||
'' || crlf ||
'This is a Mime message, which your current mail reader may not' || crlf ||
'understand. Parts of the message will appear as text. If the remainder' || crlf ||
'appears as random characters in the message body, instead of as' || crlf ||
'attachments, then you''ll have to extract these parts and decode them' || crlf ||
'manually.' || crlf ||
'' || crlf ||
'--DMW.Boundary.605592468' || crlf ||
'Content-Type: text/plain; name="message.txt"; charset=US-ASCII' || crlf ||
'Content-Disposition: inline; filename="message.txt"' || crlf ||
'Content-Transfer-Encoding: 7bit' || crlf ||
'' || crlf ||
message || crlf ;
mesg_len := length(mesg);
if mesg_len > max_size then
mesg_length_exceeded := true;
end if;
utl_smtp.write_data ( conn, mesg );
-- Append the files ...
for i in 1..3 loop
-- Exit if message length already exceeded ...
exit when mesg_length_exceeded;
-- If the filename has been supplied ...
if file_array(i) is not null then
begin
-- locate the final '/' or '\' in the pathname ...
v_slash_pos := instr(file_array(i), '/', -1 );
if v_slash_pos = 0 then
v_slash_pos := instr(file_array(i), '\', -1 );
end if;
-- separate the filename from the directory name ...
v_directory_name := substr(file_array(i), 1, v_slash_pos - 1 );
v_file_name := substr(file_array(i), v_slash_pos + 1 );
-- open the file ...
v_file_handle := utl_file.fopen(v_directory_name, v_file_name, 'r' );
-- generate the MIME boundary line ...
mesg := crlf || '--DMW.Boundary.605592468' || crlf ||
'Content-Type: application/octet-stream; name="' || v_file_name || '"' || crlf ||
'Content-Disposition: attachment; filename="' || v_file_name || '"' || crlf ||
'Content-Transfer-Encoding: 7bit' || crlf || crlf ;
mesg_len := mesg_len + length(mesg);
utl_smtp.write_data ( conn, mesg );
-- and append the file contents to the end of the message ...
loop
utl_file.get_line(v_file_handle, v_line);
if mesg_len + length(v_line) > max_size then
mesg := '*** truncated ***' || crlf;
utl_smtp.write_data ( conn, mesg );
mesg_length_exceeded := true;
raise mesg_too_long;
end if;
mesg := v_line || crlf;
utl_smtp.write_data ( conn, mesg );
mesg_len := mesg_len + length(mesg);
end loop;
exception
when utl_file.invalid_path then
if debug > 0 then
dbms_output.put_line('Error in opening attachment '||
file_array(i) );
end if;
-- All other exceptions are ignored ....
when others then
null;
end;
mesg := crlf;
utl_smtp.write_data ( conn, mesg );
-- close the file ...
utl_file.fclose(v_file_handle);
end if;
end loop;
-- append the final boundary line ...
mesg := crlf || '--DMW.Boundary.605592468--' || crlf;
utl_smtp.write_data ( conn, mesg );
-- and close the SMTP connection ...
utl_smtp.close_data( conn );
utl_smtp.quit( conn );
end;
NOT MINE BUT COPY PASTE TO HELP YOU... -
Problem with error ORA-06502: PL/SQL: numeric or value error string
Hi,
I am running a loop to just spool output data using 'dbms_output.put_line' and I keep getting this error after a few records. I resorted it and it happen at a different interval. Could it have to do with the length of the item I am trying to spool? Thanks.
ORA-06502: PL/SQL: numeric or value error stringSD wrote:
Hi,
I am running a loop to just spool output data using 'dbms_output.put_line' and I keep getting this error after a few records. I resorted it and it happen at a different interval. Could it have to do with the length of the item I am trying to spool? Thanks.
ORA-06502: PL/SQL: numeric or value error stringyes, it is a data dependent error.
Handle: SD
Status Level: Newbie
Registered: Nov 21, 2001
Total Posts: 289
Total Questions: 189 (183 unresolved)
why do you waste time here when you rarely get your questions answered? -
ORA-06502: PL/SQL: numeric or value error: character string buffer too smal
Hi Guys I am getting error ORA-06502: PL/SQL: numeric or value error: character string buffer too small as it said i thought it would be issue with length of feild but i tried to change is nothihg work i am posing code here if any one can please help me on this
PROCEDURE REPORT
p_rpt_from_dt in varchar2,
p_rpt_to_dt in varchar2,
p_apvr_id in tc_wkr.tc_row_id%type default NULL,
p_rpt_type in varchar2 default NULL,
p_backto_pg in varchar2 default NULL
IS
v_rpt_from_dt date := var_to_date(p_rpt_from_dt);
v_rpt_to_dt date := var_to_date(p_rpt_to_dt);
v_time_str varchar2(15);
cursor period_cur
cp_from_dt date,
cp_to_dt date
is
select beg_dt, end_dt
from jmcs_wk_tprd
where beg_dt <= cp_to_dt -- report end date
and end_dt >= cp_from_dt -- report start date
BEGIN
if sys_security('tcsys', 'tc_reports') != 'GRANTED' then
apps_main.access_denied;
return;
end if;
if lg_debug_fl then
v_time_str := to_char(lg_sysdate, 'hh:mi:ss a.m.');
else
v_time_str := tc_time(lg_sysdate);
end if;
/* get the time card time periods applicable to the report */
lga_tc_strt_dt := lga_null_date;
for recs in period_cur(v_rpt_from_dt, v_rpt_to_dt) loop
lga_tc_strt_dt(lga_tc_strt_dt.count+1) := recs.beg_dt;
lga_tc_end_dt(lga_tc_end_dt.count+1) := recs.end_dt;
end loop;
--if p_apvr_id is NULL then
if p_rpt_type != 'D' then
tc_reporting.reports_header
1,
'Time Card Status Report',
'for '||dd_mon_yyyy(v_rpt_from_dt)||' through '||dd_mon_yyyy(v_rpt_to_dt)||'<BR>'||
'Report Date: '||dd_mon_yyyy(lg_sysdate)||' Time: '||v_time_str,
NULL,
NULL,
NULL,
'javascript:window.close()', /* Backto */
'alert(''Reminder! Click on logo when you are ready to return to previous page'')'
end if;
if p_apvr_id is NULL then
sub_STATUS_BD_ALPHA (v_rpt_from_dt, v_rpt_to_dt, TRUE, p_rpt_type, p_apvr_id);
else
htp.p('<!-- Selected Approver ('||p_apvr_id||') -->');
sub_STATUS_BD_APVR (v_rpt_from_dt, v_rpt_to_dt, p_rpt_type, p_apvr_id);
end if;
htp.p('</body></html>');
EXCEPTION
WHEN OTHERS THEN
error_proc(SQLERRM, SQLCODE, owa_util.get_cgi_env('PATH_INFO'));
htp.p('Error Code is :'||SQLERRM);
END REPORT;
This package in trun call other procedure like below
PROCEDURE sub_STATUS_BD_ALPHA
p_rpt_from_dt in date,
p_rpt_to_dt in date,
p_display_hdr in boolean,
p_rpt_type in varchar2 default 'B',
p_apvr_id in tc_wkr.tc_row_id%type default NULL,
p_tcs_user_id in tc_wkr.tc_row_id%type default NULL
IS
v_time_str varchar2(15);
v_apvr_id tc_wkr.tc_row_id%type := 0;
v_a_user_id tc_wkr.tc_row_id%type; -- approver tcs_user_id
v_cnt integer := 0;
v_people_cnt integer := 0;
v_stat_cd varchar2(2000);
v_display_fl boolean := FALSE;
/*===========================================================================*/
cursor people_cur
cp_from_dt in date,
cp_to_dt in date
is
select
d_full_nm_lfm as name,
tc_row_id as tcs_user_id,
tcw_typ as pay_typ,
tcw_id as pay_id,
sys_strt_date as sys_strt_dt,
sys_end_dt
from tc_wkr
where sys_strt_date <= cp_to_dt
and nvl(sys_end_dt, cp_to_dt) >= cp_from_dt
order by upper(d_full_nm_lfm);
/* find the current or the most recent (if no current) approver */
cursor apvr_cur
cp_tcs_user_id in tc_wkr.tc_row_id%type
is
select
a.f_tc_apvr_id as fk_tcs_apvr_id,
w.d_full_nm_lfm as apvr_name,
w.tcw_typ as apvr_pay_typ,
w.tcw_id as apvr_pay_id,
a.strt_dt,
a.end_dt
from tc_wkr w, tc_ap_asmt a
where a.f_tc_wkr_id = cp_tcs_user_id
and w.tc_row_id = a.f_tc_apvr_id
order by a.strt_dt desc;
/* list of existing time cards UNION required time cards */
cursor tc_cur
cp_tcs_user_id in tc_wkr.tc_row_id%type, /* who's time cards */
cp_from_dt in date, /* report period from date */
cp_to_dt in date /* report period to date */
is
select
stat_cd,
strt_dt,
end_dt
from tc
where strt_dt <= cp_to_dt
and end_dt >= cp_from_dt
and fk_tc_wkrtcw_id = cp_tcs_user_id
UNION
select
'Required' as stat_cd,
beg_dt as strt_dt,
end_dt
from jmcs_wk_tprd
where beg_dt <= cp_to_dt
and end_dt >= cp_from_dt
and beg_dt not in (
select strt_dt
from tc
where strt_dt <= cp_to_dt
and end_dt >= cp_from_dt
and fk_tc_wkrtcw_id = cp_tcs_user_id
order by strt_dt;
BEGIN
if lg_debug_fl then
v_time_str := to_char(lg_sysdate, 'hh:mi:ss a.m.');
else
v_time_str := tc_time(lg_sysdate);
end if;
if p_apvr_id > 0 then
lga_report_out := lga_report_out_null;
v_apvr_id := p_apvr_id;
lga_apvr := lga_apvr_null;
select
d_full_nm_lfm,
tc_row_id,
tcw_id,
tcw_typ
into
lga_apvr(1).apvr_name,
lga_apvr(1).apvr_tcs_id,
lga_apvr(1).apvr_pay_id,
lga_apvr(1).apvr_pay_typ
from tc_wkr
where tc_row_id = v_apvr_id;
if lga_apvr(1).apvr_pay_typ != 'S' then
select decode(bend_empl_fl, 'Y', 'E', 'W')
into lga_apvr(1).apvr_pay_typ
from empl
where empl_id = lga_apvr(1).apvr_pay_id;
end if;
end if;
if p_display_hdr then
if lga_tc_strt_dt.count > 6 then /* more than 6 time periods (1 month) */
lga_width(1) := to_char(.15 * lg_page_width_standard);
lga_width(2) := to_char(.08 * lg_page_width_standard);
for i in 1..lga_tc_strt_dt.count loop
lga_width(lga_width.count+1) := to_char(.09 * lg_page_width_standard);
end loop;
lg_page_width_standard := to_number(lga_width(1)) + to_number(lga_width(2));
if nvl(p_apvr_id, 0) = 0 then
lg_page_width_standard := lg_page_width_standard * 2;
end if;
htp.p('<!-- page width = '||lg_page_width_standard||'-->');
for i in 3..lga_width.count loop
lg_page_width_standard := lg_page_width_standard + to_number(lga_width(i));
htp.p('<!-- page width = '||lg_page_width_standard||'-->');
end loop;
lg_page_width := to_char(lg_page_width_standard);
else
lga_width(1) := '15%';
lga_width(2) := '8%';
lga_width(3) := '9%';
lga_width(4) := '9%';
lga_width(5) := '9%';
lga_width(6) := '9%';
lga_width(7) := '9%';
lga_width(8) := '9%';
end if;
sub_DETAIL_PAGE_HD(p_apvr_id);
end if;
/* cursor loop */
for p in people_cur(p_rpt_from_dt, p_rpt_to_dt) loop
/* is/was this person assigned to the selected approver for the report period */
v_display_fl := FALSE;
if nvl(p_tcs_user_id, 0) > 0 then
if p_tcs_user_id = p.tcs_user_id then
htp.p('<br>Selected User');
v_display_fl := TRUE;
end if;
elsif nvl(p_apvr_id, 0) = 0 then
if nvl(p_apvr_id, 0) = 0 then
v_display_fl := TRUE;
elsif p_apvr_id > 0 or p_apvr_id = -1 then
v_display_fl := fct_ASSIGNED_APVR(p.tcs_user_id, p_apvr_id, p_rpt_from_dt, p_rpt_to_dt);
end if;
if v_display_fl then
v_people_cnt := v_people_cnt + 1;
lg_tcs_owner_info.USER_ID := p.tcs_user_id;
lg_tcs_owner_info.PAY_ID := p.pay_id;
lg_tcs_owner_info.PAY_TYPE := p.pay_typ;
lg_tcs_owner_info.SYS_STRT_DT := p.sys_strt_dt;
lg_tcs_owner_info.TERM_DT := p.sys_end_dt;
if p.pay_typ = 'S' then
begin
select wrk_hire_dt
into lg_tcs_owner_info.hire_dt
from subcntr
where sub_id = p.pay_id;
exception
when no_data_found then
tc_debug.html_message('subcntr.pay_id('||p.pay_id||')');
end;
else
select
wrk_hire_dt,
decode(bend_empl_fl, 'Y', 'E', 'W')
into
lg_tcs_owner_info.hire_dt,
lg_tcs_owner_info.pay_type
from empl
where empl_id = lg_tcs_owner_info.PAY_ID;
end if;
if lga_report_out.count = 0 then
lga_report_out(lga_report_out.count+1) := '<table border="1" cellpadding="3" width="'||lg_page_width||'">';
end if;
if mod(v_people_cnt,2) = 1 then
lga_report_out(lga_report_out.count+1) := ('<tr bgcolor="'||lg_odd_bgcolor||'">');
else
lga_report_out(lga_report_out.count+1) := ('<tr bgcolor="'||lg_even_bgcolor||'">');
end if;
lga_report_out(lga_report_out.count+1) := ('<td valign="top"><font size=-2>'||p.name||'</font></td >');
lga_report_out(lga_report_out.count+1) := ('<td valign="top"><font size=-2>'||p.pay_typ||'-'||lpad(p.pay_id,4,'0')||'</font></td >');
if nvl(p_apvr_id, 0) > 0 then /* Single Approver */
/* need approver ID for time card "status" */
lga_apvr := lga_apvr_null; /* clear the approver id array */
lga_apvr(1).apvr_tcs_id := p_apvr_id;
elsif nvl(p_apvr_id, 0) = 0 then /* ALL Approvers */
lga_apvr := lga_apvr_null; /* clear the approver id array */
v_cnt := 0;
for ap in apvr_cur (p.tcs_user_id) loop
if v_cnt = 0 then
/* most recent approver may not be the applicable approver */
v_cnt := 1;
lga_apvr(v_cnt).apvr_name := ap.apvr_name; -- identify multiple approvers for the "status"
lga_apvr(v_cnt).apvr_tcs_id := ap.fk_tcs_apvr_id; -- identify multiple approvers for the "status"
lga_apvr(v_cnt).apvr_pay_id := ap.apvr_pay_id; -- identify multiple approvers for the "status"
v_apvr_id := ap.fk_tcs_apvr_id;
if ap.apvr_pay_typ = 'S' then
lga_apvr(v_cnt).apvr_pay_typ := ap.apvr_pay_typ; -- identify multiple approvers for the "status"
else
select decode(bend_empl_fl, 'Y', 'E', 'W')
into lga_apvr(1).apvr_pay_typ
from empl
where empl_id = lga_apvr(1).apvr_pay_id;
end if;
end if;
if ap.strt_dt <= p_rpt_to_dt and nvl(ap.end_dt, p_rpt_to_dt) >= p_rpt_from_dt then
/* approver record */
lg_tcs_owner_info.APVR_ID := ap.fk_tcs_apvr_id;
lg_tcs_owner_info.APVR_STRT_DT := ap.strt_dt;
lg_tcs_owner_info.APVR_END_DT := ap.end_dt;
don't enter same approver name multiple times
when same approver has been assigned more than once
Example: approver1, approver_2, approver_1 (change back to approver 1)
for i in 1..lga_apvr.count loop
v_apvr_id := ap.fk_tcs_apvr_id;
if lga_apvr(i).apvr_tcs_id = ap.fk_tcs_apvr_id then
/* don't add again */
v_apvr_id := NULL;
exit;
end if;
end loop;
if v_apvr_id is not NULL then
v_cnt := v_cnt + 1;
lga_apvr(v_cnt).apvr_name := ap.apvr_name; -- identify multiple approvers for the "status"
lga_apvr(v_cnt).apvr_tcs_id := ap.fk_tcs_apvr_id; -- identify multiple approvers for the "status"
lga_apvr(v_cnt).apvr_pay_id := ap.apvr_pay_id; -- identify multiple approvers for the "status"
lga_apvr(v_cnt).apvr_pay_typ := ap.apvr_pay_typ; -- identify multiple approvers for the "status"
end if;
end if;
end loop;
/* list approver pay IDs */
lga_report_out(lga_report_out.count+1) := ('<td valign="top"><font size=-2>');
if lga_apvr.count = 0 then
lga_report_out(lga_report_out.count+1) := 'Approver Unassigned';
else
for i in 1..lga_apvr.count loop
if i > 1 then
lga_report_out(lga_report_out.count+1) := '<br>';
end if;
lga_report_out(lga_report_out.count+1) := (lga_apvr(i).apvr_name);
end loop;
end if;
lga_report_out(lga_report_out.count+1) := ('<td valign="top"><font size=-2>');
if lga_apvr.count = 0 then
lga_report_out(lga_report_out.count+1) := 'N/A';
else
for i in 1..lga_apvr.count loop
if i > 1 then
lga_report_out(lga_report_out.count+1) := '<br>';
end if;
lga_report_out(lga_report_out.count+1) := (lga_apvr(i).apvr_pay_typ)||'-'||lpad(lga_apvr(i).apvr_pay_id,4,'0');
end loop;
end if;
lga_report_out(lga_report_out.count+1) := ('</font></td >');
end if;
for t in tc_cur(p.tcs_user_id, p_rpt_from_dt, p_rpt_to_dt) loop
htp.p('<! '||t.strt_dt||', '||t.end_dt||', '||t.stat_cd||' -->');
--lga_report_out(lga_report_out.count+1) := ('<td valign="top"><font size=-2>');
--lga_report_out(lga_report_out.count+1) := (t.stat_cd);
--lga_report_out(lga_report_out.count+1) := ('</font></td >');
/* has the selected approver has completed processing */
if p_apvr_id > 0
and v_apvr_id = p_apvr_id
and v_a_user_id != p_apvr_id
then
exit;
end if;
for ap in apvr_cur (p.tcs_user_id) loop
if apvr_cur%rowcount = 1 then
/* most recent approver assigned */
lg_tcs_owner_info.apvr_id := ap.fk_tcs_apvr_id;
end if;
if ap.strt_dt <= t.end_dt and nvl(ap.end_dt, t.end_dt) >= t.strt_dt then
/* approver assigned during time card period */
lg_tcs_owner_info.apvr_id := ap.fk_tcs_apvr_id;
exit;
end if;
end loop;
lg_tc_status.strt_dt := t.strt_dt;
lg_tc_status.end_dt := t.end_dt;
lg_tc_status.stat_cd := t.stat_cd;
v_stat_cd := fct_TC_STATUS(nvl(p_apvr_id, 0));
lga_report_out(lga_report_out.count+1) := ('<td align="center" valign="top" bgcolor="'||lg_tc_status.bg_color||'">');
lga_report_out(lga_report_out.count+1) := ('<font size=-2 color='||lg_tc_status.font_color||'>');
lga_report_out(lga_report_out.count+1) := v_stat_cd;
lga_report_out(lga_report_out.count+1) := ('</font></td >');
end loop;
lga_report_out(lga_report_out.count+1) := '</tr>';
end if; /* v_display_fl */
end loop;
if p_rpt_type in ('B', 'S') then
lg_page_cnt := lg_page_cnt + 1;
sub_DISPLAY_STATUS_SUMMARY;
end if;
if lga_report_out.count > 0 then
lga_report_out(lga_report_out.count+1) := '</table>';
end if;
if lga_report_out.count > 0 then
if p_rpt_type = 'B' or p_apvr_id > 0 then
if p_display_hdr then
if lg_page_cnt > 0 then
if p_apvr_id > 0 then /* selected individual approver */
htp.p('</table>');
end if;
htp.p('<br style="page-break-after:always">');
htp.p('<!-- &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& -->');
htp.p('<!-- &&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& -->');
end if;
lg_page_cnt := lg_page_cnt + 1;
tc_reporting.reports_header
1,
'Time Card Status Report',
'for '||dd_mon_yyyy(p_rpt_from_dt)||' through '||dd_mon_yyyy(p_rpt_to_dt)||'<BR>'||
'Report Date: '||dd_mon_yyyy(lg_sysdate)||' Time: '||v_time_str,
NULL,
NULL,
NULL,
NULL, -- p_backto_pg, /* Backto */
'focus()',
lg_page_cnt
end if;
end if;
if p_rpt_type in ('B', 'D') then
for i in 1..lga_report_out.count loop
htp.p(lga_report_out(i));
end loop;
end if;
end if;
END sub_STATUS_BD_ALPHA;
Some veriable
type report_tc_rec is record
tc_owner_name tc_wkr.d_full_nm_lfm%type,
o_user_id tc_wkr.tc_row_id%type,
o_pay_id varchar2(10),
o_sys_strt_dt date,
o_sys_end_dt date,
tc_apvr_name tc_wkr.d_full_nm_lfm%type,
a_pay_id varchar2(10),
a_user_id tc_wkr.tc_row_id%type,
tc_strt_dt date,
tc_end_dt date,
tc_stat_cd varchar2(50),
ap_strt_dt date,
ap_end_dt date
/* time card owner information */
TYPE tcs_owner_info_rec IS RECORD
USER_ID tc_wkr.tc_row_id%type,
PAY_ID tc_wkr.tcw_id%type,
PAY_TYPE tc_wkr.tcw_typ%type,
HIRE_DT date,
SYS_STRT_DT date,
TERM_DT date,
APVR_ID tc_wkr.tc_row_id%type,
APVR_STRT_DT date,
APVR_END_DT date
/* status code determines report cell font and background colors */
TYPE tc_status_rec IS RECORD
STRT_DT date,
END_DT date,
STAT_CD tc.stat_cd%type,
FONT_COLOR varchar2(16),
BG_COLOR varchar2(16)
/* count of all time card status for report summary */
TYPE tc_status_summary_rec IS RECORD
APPROVED_CNT integer := 0,
REJECTED_CNT integer := 0,
SUBMITTED_CNT integer := 0,
POSTED_CNT integer := 0,
VERIFIED_CNT integer := 0,
OPEN_CNT integer := 0,
NEW_CNT integer := 0,
REQUIRED_CNT integer := 0,
TOTAL_CNT integer := 0
/* determine multiple approvers for individual for selected report period */
TYPE apvr_rec IS RECORD
apvr_name tc_wkr.d_full_nm_lfm%type,
apvr_tcs_id tc_wkr.tc_row_id%type,
apvr_pay_id tc_wkr.tcw_id%type,
apvr_pay_typ tc_wkr.tcw_typ%type
TYPE apvr_id_array_table IS TABLE OF apvr_rec
index by binary_integer;
type output_array is table of varchar2(1000)
index by binary_integer;
type date_array is table of date
index by binary_integer;
type status_array is table of varchar2(1000)
index by binary_integer;
type apvr_array is table of number(8)
index by binary_integer;
lga_report_out output_array; /* array of HTML code to be output to browser */
lga_report_out_null output_array; /* null array of HTML code */
lga_tc_status status_array;
lga_null_status status_array;
lga_tc_strt_dt date_array;
lga_tc_end_dt date_array;
lga_tc_disp date_array; /* start dates of displayed TC for selected user */
lga_null_date date_array; /* null array used to clear other date arrays */
/* LOCAL GLOBAL VARIABLES */
lg_tcs_owner_info tcs_owner_info_rec; /* time card owner information */
lg_tc_status tc_status_rec; /* time card status information */
lg_tc_status_summary tc_status_summary_rec; /* time card count by status */
lg_tc_rec report_tc_rec; /* time card */
lga_apvr apvr_id_array_table; /* array of approver Names and Payroll IDs */
lga_apvr_null apvr_id_array_table; /* clear the lga_apvr array for each user */
lg_sysdate date := sysdate;
lg_debug_fl boolean := FALSE;
lg_debug_owner_id tc_wkr.tc_row_id%type := 9905;
lg_debug_apvr_id tc_wkr.tc_row_id%type := 1000;
The chnages i have done its in bold
Please Advice
Thanks
Edited by: Purvik on Aug 25, 2009 11:59 AMThere is not a chance in the world, especially not knowing column definitions that I, and I suspect most anyone else, is going to wade through this much unformated code looking for an error you couldn't bother to copy in full.
Either tell us, specifically, the line on which the error is occurring or, better yet, start whacking stuff out of your code until you find the offending definition. That is certainly what I would do. Commenting out sections is a marvelous way to quickly find an issue.
Before you post again please read the FAQ. It will explain to you how to properly post and use the tags. -
Hi Team,
I am running one conc programme.
After running I am getting below error. I checked the issue on metalink and other, seems that it is an size related issue. I have increased the size of formula columns and placeholdder too.
But still getting issue.
My requirement is to get comma seperated values using SQL query itself. Neither i wanted to create layout of the report , since it is a XML publisher report and nor I am including it on RTF template.
I want the CF_10 formula column to be populated with comma seperated values.
MSG-00187: From Date 01-Sep-2014
REP-1401: 'cf_10formula': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
And Here is my code for CF_10
function CF_10Formula return Number is
begin
SELECT NVL(TO_CHAR(sum(Amount),'99,99,99,999'),0) into :CP_5 --NVL(ROUND(sum(Amount)),0) into :CP_5
-- xxhw_Coll_cat(category) "Intercat Catg"
FROM hhxw_Region_col_v
WHERE Category IN ('Intercompany - CATV')
AND trunc(gl_date) BETWEEN TO_DATE(:P_FROM_DATE, 'DD/MM/RRRR') AND TO_DATE(:P_TO_DATE, 'DD/MM/RRRR');
RETURN ROUND(:CP_5);
end;
Anyone please suggest me.
Regards,
SachinHi,
1)Why are you selecting the value into a report item? Select into a local variable and return that
RETURN :CP_5 --> This one!!
2)And you should avoid applying functions to DB columns in where clauses wherever possible, so oracle can use indexes on them if applicable:
AND gl_date >= To_date(:P_FROM_DATE, 'DD/MM/RRRR')
AND gl_date < To_date( :P_TO_DATE, 'DD/MM/RRRR') + 1;
I think you are taking 2 column in the Layout CF_10 and CP_5 right? if so, then use below Query.
FUNCTION cf_10formula
RETURN NUMBER
IS
v_amount NUMBER:null;
IS
BEGIN
BEGIN
SELECT nvl(round(SUM(amount)), 0)
INTO v_amount --> Retruns the value for CF_10 column
FROM hhxw_region_col_v
WHERE category IN ( 'Intercompany - CATV' )
AND gl_date >= to_date(:P_FROM_DATE, 'DD/MM/RRRR')
AND gl_date < to_date( :P_TO_DATE, 'DD/MM/RRRR') + 1;
:CP_5 := nvl(trunc(v_amount),0); --> Retruns the value for CP_5 column
EXCEPTION
WHEN OTHERS THEN
v_amount := 0;
srw.message(1003,'Error in Getting :' ||p_from_date);
END;
END;
And
If you've got a number function returning into a number field then all you should need to do to make the comma appear is to change the number format mask in field.
From 40000 to 40,000 -
I'm attempting to dynamically generate a rather large SQL query via the "PL/SQL function body returning SQL query" report region option. The SQL query generated will possibly be over 32K. When I execute my page, I sometimes receive the "ORA-06502: PL/SQL: numeric or value error" which points to a larger than 32K query that was generated. I've seen other posts in the forum related to this dynamic SQL size limitation issue, but they are older (pre-2010) and point to the 32K limit of the DNS (EXECUTE IMMEDIATE) and DBMS_SQL. I found this post (dynamic sql enhancements in 11g) which discusses 11g no longer having the 32K size limitation for generating dynamic SQL. Our environment is on 11gR2 and using ApEx 4.2.1. I do not know which dynamic SQL method -- DNS or DBMS_SQL -- ApEx 4.2.1 is using. Can someone clarify for me which dynamic SQL method ApEx uses to implement the "PL/SQL function body returning SQL query" option?
As a test, I created a page on apex.oracle.com with a report region with the following source:
declare
l_stub varchar2(25) := 'select * from sys.dual ';
l_sql clob := l_stub || 'union all ';
br number(3) := 33;
begin
while length ( l_sql ) < 34000 loop
l_sql := l_sql || l_stub || 'union all ';
end loop;
l_sql := l_sql || l_stub;
for i in 1 .. ceil ( length ( l_sql ) / br ) loop
dbms_output.put_line ( dbms_lob.substr ( l_sql, br, ( ( i - 1 ) * br ) + 1 ) );
end loop;
return l_sql;
end;
The dbms_output section is there to be able to run this code in SQL*Plus and confirm the size of the SQL is indeed larger than 32K. When running this in SQL*Plus, the procedure is successful and produces a proper SQL statement which can be executed. When I put this into the report region on apex.oracle.com, I get the ORA-06502 error.
I can certainly implement a work-around for my issue by creating a 'Before Header' process on the page which populates an ApEx collection with the data I am returning and then the report can simply select from the collection, but according to documentation, the above 32K limitation should be resolved in 11g. Thoughts?
Shane.What setting do you use in your report properties - especially in Type and in Region Source?
If you have Type="SQL Query", then you should have a SELECT statement in the Region Source. Something like: SELECT .... FROM ... WHERE
According to the ERR-1101 error message, you have probably set Type to "SQL Query (PL/SQL function body returning SQL query)". In this situation APEX expects you to write a body of a PL/SQL function, that will generate the text of a SQL query that APEX should run. So it can be something like:
declare
mycond varchar2(4000);
begin
if :P1_REPORT_SEARCH is not null THEN
mycond:='WHERE LAST_NAME like :P1_REPORT_SEARCH ||''%''';
end if;
return 'select EMPLOYEE_ID, FIRST_NAME, LAST_NAME from EMPLOYEES ' ||mycond;
end;
And for escaping - are you interested in escaping the LIKE wildcards, or the quotes?
For escaping the wildcards in LIKE function so that when the user enters % you will find a record with % and not all functions, look into the SQL Reference:
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14200/conditions007.htm
(You would than need to change the code of your function accordingly).
If you are interested in escaping the quotes, try to avoid concatenating the values entered by the user into the SQL. If you can, use bind variables instead - as I have in my example above. If you start concatenating the values into the text of SQL, you are open to SQLInjection - user can enter anything, even things that will break your SQL. If you really need to allow users to choose the operator, I would probably give them a separate combo for operators and a textfield for values, than you could check if the operator is one of the allowed ones and create the condition accordingly - and than still use bind variable for inserting the filtering value into the query. -
ORA-06502 : PL/SQL: numeric or value error in Report formattrigger
Hi guys,
I have a Format Trigger code to not display any amount less than 1.00 at a group frame level and outside of the group frame is the Grand Total in my report but I am getting
" REP-1401: ' r_headerformattrigger ' : Fatal PL/SQL error occurred.
"ORA-06502 : PL/SQL: numeric or value error"
every time I try to run it.
function R_headerFormatTrigger return boolean is
begin
if :c_header_amount_accrual1_disp > 0.99 then
return (TRUE);
else
return (FALSE);
end if;
end;
Does any one have any idea as why?read this code
Cause: An arithmetic, numeric, string, conversion, or constraint error occurred. For example, this error occurs if an attempt is made to assign the value NULL to a variable declared NOT NULL, or if an attempt is made to assign an integer larger than 88 to a variable declared NUMBER(2).
Action: Change the data, how it is manipulated, or how it is declared so that values do not violate constraints
Rizwan -
Package Returning Error ORA-06502: PL/SQL: numeric or value error
Hi,
I create a package to export to spread sheet .xls, The package work for simple query if i pass the query to package.
There is no error in package please create the package and do the following as mentioned below
create or replace
PACKAGE export_pkg_spread_sheet
AS
procedure download_excel(vsql in clob );
PROCEDURE excel_header(p_header in out nocopy clob);
procedure excel_content(p_content in out nocopy clob,
vsql in clob );
procedure excel_footer(p_footer in out nocopy clob);
procedure get_usable_sql (p_sql_in IN clob,
p_sql_out OUT clob);
END export_pkg_spread_sheet;
create or replace
PACKAGE body export_pkg_spread_sheet
AS
PROCEDURE excel_header (p_header IN OUT nocopy CLOB)
AS
BEGIN
p_header := '<html><body>';
END;
procedure download_excel( vsql in clob )
as
p_header clob;
p_footer clob;
p_content clob;
begin
owa_util.mime_header( 'application/octet', FALSE );
htp.p('Content-Disposition: attachment; filename="report.xls"');
owa_util.http_header_close;
excel_header( p_header);
excel_content(p_content,vsql);
excel_footer(p_footer);
dbms_output.put_line(p_header ||p_content|| p_footer);
HTP.PRN( p_header ||p_content|| p_footer);
htmldb_application.g_unrecoverable_error := true;
end;
procedure excel_content(p_content in out nocopy clob,
vsql in clob)
as
p_sql_stmt clob;
cur PLS_INTEGER := DBMS_SQL.OPEN_CURSOR;
cols DBMS_SQL.DESC_TAB;
ncols PLS_INTEGER;
TYPE varColumn IS TABLE OF varchar2(32000);
vtab varColumn;
v_column_count NUMBER DEFAULT 0;
v_status INTEGER;
BEGIN
htp.prn('am here');
/* SELECT region_source into p_sql_stmt
FROM apex_application_page_regions
WHERE region_id = p_region_id AND
page_id = p_page_id AND
application_id = p_app_id; */
get_usable_sql (vsql,p_sql_stmt);
p_content := p_sql_stmt;
-- Parse the query.
DBMS_SQL.PARSE(cur, p_sql_stmt , DBMS_SQL.NATIVE);
-- Retrieve column information
DBMS_SQL.DESCRIBE_COLUMNS (cur, ncols, cols);
-- Display each of the column names
p_content := '<table> <tr>';
FOR colind IN 1 .. ncols
LOOP
p_content := p_content || '<td>' || cols(colind).col_name || '</td>';
END LOOP;
p_content := p_content || '</tr>';
vtab := varColumn(null);
for i in 1..ncols
loop
vtab.extend;
DBMS_SQL.DEFINE_COLUMN (cur, i, vtab(i), 2000);
--dbms_output.put_line(vtab(i));
end loop;
v_status := DBMS_SQL.EXECUTE (cur);
LOOP
p_content := p_content || '<tr>';
EXIT WHEN (DBMS_SQL.FETCH_ROWS (cur) <= 0);
FOR i IN 1 ..ncols
loop
DBMS_SQL.COLUMN_VALUE (cur, i, vtab(i));
-- p_content := p_content || '<td>' || 'xyz' || '</td>';
p_content := p_content || '<td>' || vtab(i) || '</td>';
END LOOP;
p_content := p_content || '</tr>' ;
END LOOP;
p_content := p_content || '<table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
exception
when others then
p_content := '<td>Exception Error in printing data</td><table>' ;
DBMS_SQL.CLOSE_CURSOR (cur);
end;
procedure excel_footer( p_footer in out nocopy clob)
as
begin
p_footer := '</body></html>';
end;
PROCEDURE get_usable_sql (p_sql_in IN clob, p_sql_out OUT clob)
IS
v_sql clob;
v_names DBMS_SQL.varchar2_table;
v_pos NUMBER;
v_length NUMBER;
v_exit NUMBER;
BEGIN
v_sql := p_sql_in;
v_names := wwv_flow_utilities.get_binds (v_sql);
FOR i IN 1 .. v_names.COUNT
LOOP
<<do_it_again>>
v_pos := INSTR (LOWER (v_sql), LOWER (v_names (i)));
v_length := LENGTH (LOWER (v_names (i)));
v_sql :=
SUBSTR (v_sql, 1, v_pos - 1)
|| v_names (i)
|| SUBSTR (v_sql, v_pos + v_length);
v_sql :=
REPLACE (v_sql,
UPPER (v_names (i)),
'(SELECT v('''
|| LTRIM (v_names (i), ':')
|| ''') FROM DUAL)'
IF INSTR (LOWER (v_sql), LOWER (v_names (i))) > 0
THEN
GOTO do_it_again;
END IF;
END LOOP;
p_sql_out := v_sql;
END;
END export_pkg_spread_sheet;
After creating the package pass the parameter to package like this
begin
export_pkg_spread_sheet.download_excel('select * from emp');
end;
Package will allow to download the spread shreet. If i try to pass the a complex query to package it is returning error as mentioned below
ORA-06502: PL/SQL: numeric or value error
In the above package there is a procedure called procedure excel_content which actuall prints the data in the spread sheet this is where the error is coming from there is a variable called vsql have declared it as clob to hold large string but still i am getting the same error when trying to pass a big string.
Please check the error and let me know.
Thanks
SudhirHi Praveen,
This is the query i am using to pass
Declare
qry clob;
Begin
qry := ' 'SELECT
AR.REGION_CODE,
AR.DISTRICT_CODE,
AR.TERRITORY_CODE,
CASE
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.REGION_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NULL THEN
AR.DISTRICT_NAME
WHEN AR.REGION_NAME IS NOT NULL AND AR.DISTRICT_NAME IS NOT NULL AND AR.TERRITORY_NAME IS NOT NULL THEN
AR.TERRITORY_NAME
END TERR_NAME,
AR.EMPLOYEE_ID,
AR.LAST_NAME,
AR.FIRST_NAME,
AR.GENDER,
AR.DATE_OF_HIRE,
AR.PROJECT_EMPLOYEE_TITLE_ID,
AR.COMPANY_ID,
AR.CUSTOMER_EMAIL,
AR.BUSINESS_EMAIL,
AR.CUSTOMER_VOICEMAIL,
AR.CUSTOMER_VOICEMAIL_EXT,
AR.QUINTILES_VOICEMAIL,
AR.QUINTILES_VOICEMAIL_EXT , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,1 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Shipping_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,3 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Storage_ZipCode" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_1(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_1" , complete_roster_pkg_report.AR_F_ADDRESS_GET_LINE_2(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ADDRESS_TYPE_2" , complete_roster_pkg_report.AR_F_ADDRESS_GET_PHONE(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Phone" , complete_roster_pkg_report.AR_F_ADDRESS_GET_CITY_TOWN(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_City_Town" , complete_roster_pkg_report.AR_F_ADDRESS_GET_COUNTRY_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_Country_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_STATE_NAME(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_State_Name" , complete_roster_pkg_report.AR_F_ADDRESS_GET_ZIP_POSTAL(AR.PROJECT_ID,AR.EMPLOYEE_ID,4 ,TO_DATE(AAH.EFFECTIVE_DATE)) "Home_ZipCode" FROM AR_V_ROSTER AR
LEFT JOIN AR_V_ADDRESS_HISTORY AAH
ON
(AR.PROJECT_ID = AAH.PROJECT_ID AND
AR.EMPLOYEE_ID = AAH.EMPLOYEE_ID)
WHERE
UPPER(AR.USER_EMPLOYEE_ID) = ''Q766730'' AND
AR.PROJECT_ID = 81 ';
export_pkg_spread_sheet.download_excel(qry);
End;
Praveen you can pass your DB table query to check the error. I am trying to pass as mentioned above.
Please let me know if my question is not clear.
Thanks
Sudhir -
ORA-06502: PL/SQL: numeric or value error While Exporting in Oracle 10g
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in AR8MSWIN1256 character set and AL16UTF16 NCHAR character set
server uses AR8ISO8859P6 character set (possible charset conversion)
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions
. exporting system procedural objects and actions
. exporting pre-schema procedural objects and actions
. exporting cluster definitions
. about to export SYSTEM's tables via Conventional Path ...
. . exporting table DEF$_AQCALL 0 rows exported
. . exporting table SRC_RQST_SEQ 1 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table SRC_USERS 6 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table SRC_YEAR_LOOKUP 40 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table TENDER_DETAIL_TABLE 36 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table TENDER_MASTER_TABLE 34 rows exported
EXP-00091: Exporting questionable statistics.
. . exporting table TENDER_NEW_DETAIL_TABLE 4 rows exported
EXP-00091: Exporting questionable statistics.
. exporting synonyms
. exporting views
EXP-00056: ORACLE error 6502 encountered
ORA-06502: PL/SQL: numeric or value error
LPX-00210: expected '<' instead of 'n'
ORA-06512: at "SYS.UTL_XML", line 152
ORA-06512: at "SYS.DBMS_METADATA_INT", line 7195
ORA-06512: at "SYS.DBMS_METADATA_INT", line 9135
ORA-06512: at "SYS.DBMS_METADATA", line 1882
ORA-06512: at "SYS.DBMS_METADATA", line 3707
ORA-06512: at "SYS.DBMS_METADATA", line 3689
ORA-06512: at line 1
EXP-00056: ORACLE error 6502 encountered
ORA-06502: PL/SQL: numeric or value error
LPX-00210: expected '<' instead of 'n'
ORA-06512: at "SYS.UTL_XML", line 152
ORA-06512: at "SYS.DBMS_METADATA_INT", line 7195
ORA-06512: at "SYS.DBMS_METADATA_INT", line 9135
ORA-06512: at "SYS.DBMS_METADATA", line 1882
ORA-06512: at "SYS.DBMS_METADATA", line 3707
ORA-06512: at "SYS.DBMS_METADATA", line 3689
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Plz reply me the appropriate Solution
Edited by: user8920919 on May 3, 2010 12:27 AMhi,
EXP-00091: Exporting questionable statistics The client character set(NLS_LANG) does not match the server character;
select parameter,value from nls_database_parameters where parameter like '%CHARACTERSET%';
and check the client system character set
- Pavan Kumar N
- ORACLE OCP - 9i/10g
https://www.oracleinternals.blogspot.com -
Hi,
I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
My Approach is :
a) Create a record type variable ( concists of multiple segments)
b) Create a pl/sql table type of the records type in a)
c) Created a cursor of same structure as pl/sql table type ( collects data)
d) BULK CoLLECT data from cursor into pl/sql table
e) Print the data
But during Bulk Collect i get the below error :
Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated BindAshish_Apps wrote:
Hi,
I am trying toceate an interface which collects data from database make some transformation and populated seeded tables in the same database.
My Approach is :
a) Create a record type variable ( concists of multiple segments)
b) Create a pl/sql table type of the records type in a)
c) Created a cursor of same structure as pl/sql table type ( collects data)
d) BULK CoLLECT data from cursor into pl/sql table
e) Print the data
But during Bulk Collect i get the below error :
Unexpected error in xxc_hr2hr_populate_elements.main at FLOW TRACE-1.120. Error: ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-20003: Unexpected error in xxc_hr2hr_populate_elements.get_data at FLOW TRACE-1.1.100. Error: ORA-06502: PL/SQL: numeric or value error: Bulk Bind: Truncated BindVerify the rows you are fetching are having the same data types as your Record like Dates should go to date , decimal should not be fetched in type defined as number etc. -
-6502 ORA-06502: PL/SQL: numeric or value error when using 'Create CAPI Definition'
I get an error when I try to create a CAPI definition with Headstart untilities (6i). I use HSU_CAPI revision 6.5.2.0
The detailed information says the following:
Message
BLAPI.OPEN_ACTIVITY
Start HSU_CAPI.run
Number of Tables to create CAPI for 1
Initial checks for table KCS_TENDERS with id 692754610572409851363604771392473242
HSU_CAPT.initial_checks for table KCS_TENDERS
HSU_CAPF.initial_checks for table KCS_TENDERS
HSU_CAPC.initial_checks Custom Services for table KCS_TENDERS
HSU_CAPB.initial_checks BRDD for table KCS_TENDERS
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDIPLS
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
KCS_TENDERS Business Rule Design Definition BR_TNR001_CEV does not have any Trigger Columns. Rule will fire when any column is updated.
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDIPLS
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
bltext.get_line_containing
Creating CAPI for table KCS_TENDERS with id 692754610572409851363604771392473242
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Insert-stmt, Open transaction.
Write Text for element type APPLOG with id 753236628580304413262318236391196826 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580304413262318236391196826 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Update-stmt, Open transaction.
Write Text for element type APPLOG with id 753236628580332747461215454262479002 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580332747461215454262479002 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Delete-stmt, Open transaction.
Write Text for element type APPLOG with id 753236628580361081660112672133761178 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580361081660112672133761178 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-After-Insert-stmt, Close transaction.
Write Text for element type APPLOG with id 753236628580389415859009890005043354 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580389415859009890005043354 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-After-Update-stmt, Close transaction.
Write Text for element type APPLOG with id 753236628580417750057907107876325530 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580417750057907107876325530 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-After-Delete-stmt, Close transaction.
Write Text for element type APPLOG with id 753236628580446084256804325747607706 - Text type: ALCODE number of text lines = 6 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580446084256804325747607706 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Before-Delete-row, Save old data.
Write Text for element type APPLOG with id 753236628580474418455701543618889882 - Text type: ALCODE number of text lines = 404 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580474418455701543618889882 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Insert, Call CAPI.
Write Text for element type APPLOG with id 753236628580568865785358936523163802 - Text type: ALCODE number of text lines = 4 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580568865785358936523163802 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Update, Call CAPI.
Write Text for element type APPLOG with id 753236628580597199984256154394445978 - Text type: ALCODE number of text lines = 4 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580597199984256154394445978 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Pre-Delete, Call CAPI.
Write Text for element type APPLOG with id 753236628580625534183153372265728154 - Text type: ALCODE number of text lines = 17 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580625534183153372265728154 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-Insert, Call CAPI.
Write Text for element type APPLOG with id 753236628580653868382050590137010330 - Text type: ALCODE number of text lines = 7 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580653868382050590137010330 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-Update, Call CAPI.
Write Text for element type APPLOG with id 753236628580682202580947808008292506 - Text type: ALCODE number of text lines = 144 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580682202580947808008292506 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
Recreating KCS_TENDERS Table API/Trigger Logic - Event: Post-Delete, Call CAPI.
Write Text for element type APPLOG with id 753236628580767205177639461622139034 - Text type: ALCODE number of text lines = 282 - REPLACE
Deleted old text
Write Text for element type APPLOG with id 753236628580767205177639461622139034 - Text type: ALCMNT number of text lines = 1 - REPLACE
Deleted old text
HSU_CAPF.create_or_find_capi_pack
hsu_capi.find_plm (kcs_tnr_capi, 692754610572409851363604771392473242, CAPI).
capi package found in the context folder
BLPLM.UPD
FREE_FORMAT_TEXT_FLAG......... = Y
IMPLEMENTATION_NAME........... = kcs_tnr_capi
PLSQL_MODULE_TYPE............. = PACKAGE
SCOPE......................... = PUBLIC
COMPLETION_STATUS............. = COMPLETED
NAME.......................... = kcs_tnr_capi
PURPOSE....................... = Custom API package for implementing Business Rules and supporting TAPI
Recreated Package KCS/ KCS_TNR_CAPI, preserving only the Revision History.
HSU_CAPF.add_tags_er_av
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
bltext.get_lines_from_repository, p_text_type=CDINOT
bltext.get_line_containing
bltext.get_line_containing
HSU_CAPF.create_specification
HSU_CAPF.create_c_tabalias
HSU_CAPF.create_c_tabalias_all
HSU_CAPF.create_aggregate_value
HSU_CAPF.create_aggregate_value
HSU_CAPF.create_aggregate_value
Activity aborted with ORACLE internal errors.
-6502 ORA-06502: PL/SQL: numeric or value error: character string buffer too small
What can I do about it???
Thanks in advance.
Menno HoogsteenWorking on the same project as Menno, I had the time to look into the problem.
The problem is caused by the creation of the capi-function agregate_char_value in the packages hsu_capf. While creating this function the following code is executed:
add(' -- allowable values:');
add(' -- '||l_col_name_list);
This last statement causes the problem because this table is very big. L_col_name_list contains 2391 characters wich is 393 characters to long. So i changed this code into:
add(' -- allowable values:');
add(' -- '||substr(l_col_name_list,1,1990));
add(' -- '||substr(l_col_name_list,1990));
and everything works fine. Perhaps something for a patch?
Kind regards,
Ruben Spekle -
ORA-06502: PL/SQL: numeric or value error
HI All,
I am facing the following issue and looking forward for help to find the cause.
We are converting PDF documents in our repository to HTML using Oracle API
ctx_doc.ifilter (v_datablob, v_dataclob);
a highly simplified version of our code will be something like this..
1) Create table to store the BLOB(Binary PDF documents)
create table tbl_pdf_store(pdf_doc blob);
2) Insert a row and store a PDF.
3) Convert the PDF into HTML and store it in a CLOB object..
DECLARE
v_datablob BLOB;
v_dataclob CLOB;
BEGIN
--Create temporary clob objects
DBMS_LOB.createtemporary (v_dataclob, TRUE, DBMS_LOB.SESSION);
DBMS_LOB.createtemporary (v_datablob, TRUE, DBMS_LOB.SESSION);
--get the pdf to be converted from store table
SELECT pdf_doc
INTO v_datablob
FROM tbl_pdf_store
WHERE rownum < 1;
--convert the BLOB to HTML and store it in CLOB
ctx_doc.ifilter (v_datablob, v_dataclob);
exception
when others then
dbms_output.put_line(sqlerrm||' - '||sqlcode);
end;
Now the issue I am facing is, the above code works fine for few documents and for few others I get this cryptic error message
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "CTXSYS.DRUE", line 180
ORA-06512: at "CTXSYS.CTX_DOC", line 1142
ORA-06502: PL/SQL: numeric or value error - -6502
I cant reproduce the exact code here, but if anyone had faced the similar issue, then it would be great if they help me out.
thanks,
Prashant> Billy, its not just plain wrong its a sin :). "When
others" should itself be avoided if possible(it just
shows you don't know what error can occur). In the
actual code, we are using separate package to handle
and log errors. Here it was just for simplification I
added that putline code.
Phew.. You had me worried there... :-)
> I ran my procedure in debug mode and it throws this
exception when its executing the Oracle API
ctx_doc.ifilter
And there is very little you can do debugging that, as that source code is encoded (wrapped).
Which means that unfortunately you have to treat that code as a black box and investigate the bug with respects to:
a) the "environment" from which the call is made (ito of session settings, the sequence of calls made, etc)
b) the data and parameters passed
> this is not the case with all the PDFs..I was able to
convert more than 11 thousand documents without any
issues. I have this for only few hundred documents.
This would seem to point to a bug in Oracle's CTX conversion/filter code. Maybe those PDFs are a newer version and is not correctly supported. Maybe they're an older version that is not supported.
Which is why I said you need to isolate the error. Determine which PDFs are failing. Create a test harness (simplified code as you've posted) to perform a conversion (and nothing else).
Determine which PDFs fail and which works. Look at the differences between PDFs. E.g. can those problem PDFs be opened with different Acrobat Reader version - or do some of them fail?
> Another issue is I cannot view the content of the
these documents to check if anything is different :(.
You can with Acrobat Reader.. right?
> so no sure how to go from here...is there a
printstack method in Oracle 9i(similar to 10g I
guess) which can give me more information as I am
currently lost and not sure where to look.
Dumping the stack will not be of much help. In fact, the error message sequence you pasted already show the call sequence. And as these are in Oracle PL/SQL code, there is nothing really you can do about it.
My suggestion is to
a) isolate the error
b) consult the manual(s) to ensure that the Oracle PL/SQL s/w is used correctly
c) determine if this is data related (e.g. different PDF versions for example)
d) log a SR (Service Request) with Oracle Support
The more you can do ito of (a) - (c), the better the chance for finding the root cause, and the quicker resolution when you have no choice but to do (d). -
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
I have an HTMLDB report that errors with the above message. The query is over 7000 characters long so I'm guessing this is the cause. If I retrieve the query from a query table, replace the variables in the LONG query using PL/SQL and execute using dynamic SQL, are the HTMLDB reporting features the same as if I was using a simple SQL query? Is there a better way? I will need to 'drill-down' from this report so how do I create the links? The only HTMLDB PL/SQL package I can find mentioned in the User's Guide is HTMLDB_PLSQL_JOB.
Cheers, PaulHello All,
I have the same problem.
For me it started when i got about 500 rows in the table
on which the LOV is based.
With a lot of trying with substr I managed to find the size of the string which it still accepted, which was 51 characters.
So I thought it was some glitch in the APEX insides, and since I had no time to resolve it further, I went on working.
But I have to resolve it now, because the following mysterious behaviour is occurring:
Every few records added to the base table, the problem occurs again, and I can resolve it by cutting down the string
with one character.
I have now reached 39 characters !?
I am afraid that I will end up with 1 character or even null.
If I switch to Popup list based on LOV there's no problem, and the complete strings are shown.
The maximum length of the string in my basetable is 252, but the data in it now reaches 55 at most.
Any idea welcome!
I did already recreate the master-detail form from scratch, but there the same behaviour.
greetings,
Richard Kloostra -
ORA-06502: PL/SQL: numeric or value error : Not able to run a script
Hi All,
I want to run a script like this:
DECLARE
I_so_status_dtl RIB_SOStatusDtl_REC;
BEGIN
I_so_status_dtl := RIB_SOStatusDtl_REC('0' --Cust Order No
,'1000000014' --Dest ID
,'100010222' --Item ID
,1 --Order Line Number
,1 --Unit Quantity
,'R' --Status
,'RMS12DEV' --User ID
,'06-May-2001' --Updated Date
End;
I am trying to run this script. Actually this script is supposed to generate an XML message, which I require. Here's the definition for the TYPE RIB_SOStatusDtl_REC:
create or replace TYPE RIB_SOStatusDtl_REC UNDER RIB_OBJECT (
cust_order_nbr VARCHAR2(10),
dest_id VARCHAR2(10),
item_id VARCHAR2(25),
order_line_nbr NUMBER(3),
unit_qty NUMBER(12,4),
status VARCHAR2(2),
user_id VARCHAR2(10),
updated_date DATE,
overriding member procedure appendNodeValues( i_prefix in varchar2)
,constructor function RIB_SOStatusDtl_REC (rib_oid number, cust_order_nbr VARCHAR2, dest_id VARCHAR2, item_id VARCHAR2, order_line_nbr NUMBER, unit_qty NUMBER, status VARCHAR2) return self as result
,constructor function RIB_SOStatusDtl_REC (rib_oid number, cust_order_nbr VARCHAR2, dest_id VARCHAR2, item_id VARCHAR2, order_line_nbr NUMBER, unit_qty NUMBER, status VARCHAR2, user_id VARCHAR2) return self as result
This TYPE has a body which actually generates an XML message.
But whenever I am trying to run this, I am getting the following message:
Error report:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at line 6
06502. 00000 - "PL/SQL: numeric or value error%s"
*Cause:
*Action:
Therefore I am not able to run the following script. Here I am passing hard coded value within the TYPE, as I have run similar kind of scripts, which accepts this and creates an xml message. Can anyone help me what's the wrong with this script?
Thanks & Regards,
DebabrataHi,
Create one constructor same as with 8 parameters as you have constructor for only 7 and 8 9 parameters.
Regards
RK -
ORA-06502: PL/SQL: numeric or value error(Run Time Error)
Hi,
Intially the table structure goes something like this.
CREATE TABLE CLARITY_RESPONSE_LOG
REQUEST_CODE NUMBER,
RESPONSE_FILE BLOB,
DATE_CRATED DATE NOT NULL,
CREATED_BY NUMBER NOT NULL,
UPDATED_BY NUMBER DEFAULT 1,
)The content of the RESPONSE_FILE column which is a BLOB data type has some XML content(XML file).
The compiled proc which uses the above table is as follows.
CREATE OR REPLACE PROCEDURE "MWF_ONLINE_RESPONSE_XML"
AS
v_file UTL_FILE.FILE_TYPE;
v_text VARCHAR2 (20);
v_filename VARCHAR2 (200);
v_delimitedchar CHAR (1);
----log
v_process_name VARCHAR2(100) := 'MWF_ONLINE_RESPONSE_XML';
v_sqlerrorcd VARCHAR2(10);
v_sqlerrormsg VARCHAR2(255);
v_seq_auto_email_job NUMBER;
v_cnt NUMBER := 0;
v_user_name VARCHAR2(30);
BEGIN
--- for log use
SELECT sys_context('USERENV','OS_USER') INTO v_user_name FROM dual;
INSERT INTO PROCESS_ERROR_LOG
(seq_num,
process_name,
status,
process_date,
user_name)
VALUES (seq_dataxprocesslog.NEXTVAL,
v_process_name,
'STA',
SYSDATE,
v_user_name);
v_delimitedchar := CHR (124);
v_filename := 'online_response_xml.txt';
v_file := UTL_FILE.FOPEN ('MWF_DATA_EXTRACTS', v_filename, 'W');
UTL_FILE.PUT_LINE
(v_file,
'online_response_xml'
FOR online_response IN
(SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
FROM CLARITY_RESPONSE_LOG
WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)
LOOP
UTL_FILE.PUT_LINE (v_file, online_response.Online_Respone_xml);
v_cnt := v_cnt + 1;
END LOOP;
UTL_FILE.FCLOSE(v_file);
INSERT INTO PROCESS_ERROR_LOG
(seq_num,
process_name,
status,
process_date,
cnt,
user_name)
VALUES (seq_dataxprocesslog.NEXTVAL,
v_process_name,
'COM',
SYSDATE,
v_cnt,
v_user_name);
COMMIT;
EXCEPTION
WHEN OTHERS THEN
v_sqlerrorcd := SQLCODE;
v_sqlerrormsg := SUBSTR(SQLERRM,1,255);
INSERT INTO PROCESS_ERROR_LOG
(seq_num,
process_name,
status,
process_date,
error_msg,
error_id,
user_name)
VALUES (seq_dataxprocesslog.NEXTVAL,
v_process_name,
'ERR',
SYSDATE,
v_sqlerrormsg,
v_sqlerrorcd,
v_user_name);
COMMIT;
END;The above code has been compiled without any compilation errors but at run time I am getting the error:
ORA-06502: PL/SQL: numeric or value error.
Is it because of below statement in the above proc:
SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
FROM CLARITY_RESPONSE_LOG
WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)Please advicevine wrote:
Is it because of below statement in the above proc:
SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
FROM CLARITY_RESPONSE_LOG
WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)Please adviceto see where the line code that gets the error try using dbms_output.put_line() and before you run your procedure use the SQL*Plus command set serveroutput on. see this example below using the dbms_output.put_line().
CREATE OR REPLACE PROCEDURE "MWF_ONLINE_RESPONSE_XML" AS
v_file UTL_FILE.FILE_TYPE;
v_text VARCHAR2 (20);
v_filename VARCHAR2 (200);
v_delimitedchar CHAR (1);
----log
v_process_name VARCHAR2(100) := 'MWF_ONLINE_RESPONSE_XML';
v_sqlerrorcd VARCHAR2(10);
v_sqlerrormsg VARCHAR2(255);
v_seq_auto_email_job NUMBER;
v_cnt NUMBER := 0;
v_user_name VARCHAR2(30);
BEGIN
--- for log use
SELECT sys_context('USERENV','OS_USER') INTO v_user_name FROM dual;
dbms_output.put_line('1');
INSERT INTO PROCESS_ERROR_LOG
(seq_num,
process_name,
status,
process_date,
user_name)
VALUES (seq_dataxprocesslog.NEXTVAL,
v_process_name,
'STA',
SYSDATE,
v_user_name);
dbms_output.put_line('2');
v_delimitedchar := CHR (124);
v_filename := 'online_response_xml.txt';
v_file := UTL_FILE.FOPEN ('MWF_DATA_EXTRACTS', v_filename, 'W');
UTL_FILE.PUT_LINE(v_file,'online_response_xml');
dbms_output.put_line('3');
FOR online_response IN
(SELECT XMLTYPE (response_file, NLS_CHARSET_ID ('char_cs')).getclobval () AS Online_Respone_xml
FROM CLARITY_RESPONSE_LOG
WHERE TRUNC(date_crated ) = TRUNC(SYSDATE-1)) LOOP
UTL_FILE.PUT_LINE (v_file, online_response.Online_Respone_xml);
v_cnt := v_cnt + 1;
dbms_output.put_line('4');
END LOOP;
UTL_FILE.FCLOSE(v_file);
dbms_output.put_line('5');
INSERT INTO PROCESS_ERROR_LOG
(seq_num,
process_name,
status,
process_date,
cnt,
user_name)
VALUES (seq_dataxprocesslog.NEXTVAL,
v_process_name,
'COM',
SYSDATE,
v_cnt,
v_user_name);
COMMIT;
dbms_output.put_line('6');
EXCEPTION
WHEN OTHERS THEN
v_sqlerrorcd := SQLCODE;
v_sqlerrormsg := SUBSTR(SQLERRM,1,255);
INSERT INTO PROCESS_ERROR_LOG
(seq_num,
process_name,
status,
process_date,
error_msg,
error_id,
user_name)
VALUES (seq_dataxprocesslog.NEXTVAL,
v_process_name,
'ERR',
SYSDATE,
v_sqlerrormsg,
v_sqlerrorcd,
v_user_name);
COMMIT;
END;
Maybe you are looking for
-
Macbook Pro doesn't recognize my fast track pro c400
Hello I am using Fast track pro c400 from M-audio. When I use the fast track pro c400 it works. However, when I disconnect it from my Macbook Pro and reconnects it, MIDI setting recognizes it again but this time with out any available input and outpu
-
G5 wont boot to desktop- Final results
Hi everyone! My story started at this post http://discussions.apple.com/thread.jspa?threadID=2206583&start=0&tstart=0 I just wanted to post what happened in the end. I finally got the tool to remove the processor and when i did finally do it now when
-
What kind of cables do I need to hook up the mac mini and stereo speakers
I
-
Browse man pages in Lion's Terminal
Just read about this, thought it was worth sharing: Browse man pages in Lion's Terminal
-
Last time my lack of an admin password to alter the desktop interfered with the download and now it says the invitation has already been accepted so I can't retry... The team administrator says there's no resend option. What do I do?