Utlrp.sql script from OEM

Any users on how to create grid control job for recompiling object via below script:
@?/rdbms/admin/utlrp.sql
I tried few testing but all failing at
SQL> SQL> SQL> SQL> SQL> SELECT dbms_registry_sys.time_stamp('utlrp_bgn') as timestamp from dual
ERROR at line 1:
ORA-00904: "DBMS_REGISTRY_SYS"."TIME_STAMP": invalid identifier
Thanks,

i recreated sysaux because one of our developer add datafile (for sysaux) in home location not in +ASM, that is also only for prod1 not at both
the location then after some days i was getting ora-600 then i found that wrongly add datafile sysaux.
then i copied that datafile to other location also.after that ora-600 gone...but after some days i restarted database
that time it was asking for recovery of sysaux,as we dont have any and any kind of backup and archivelog
i made offline to that sysaux tablespace,after making offline we are facing problem at very activity so we recreated
sysaux . . . ..

Similar Messages

How to load SQL scripts from a text file.

Hi, i tried several time to load a text file/SQL script with 10 different tables and data, but 10g Express doesen't allows me to do that, any one can direct me or point out to me what i should do or do i need to adopt any special method to to get this done. i am sure there must be some thing where you can upload SQL scripts from a text file (in SQL command editor!). thanks

Hi,
see my other answer here:
SQL command editor doesn't take more than 1 insert command
This seems to be a duplicate question, right? Or am I missing something?
Regards,
~Dietmar.

Running sql script from pl/sql

Is there any standard way to run an external sql script from pl/sql
I really appreciate any assistance.

If you want, I did start writing a function reading and executing statements out of sql script with utl_file.
can I issue this command in PL/SQL: EXECUTE IMMEDIATE '@filename.sql';
the function could be extended for DDL, session setting, etc...
Regards
Laurent

Copying SQL Script from Oracle SQL Developer into Excel with formatting

I need to copy a SQL Script into Excel in order to develop some VBA code. Is there any nice way that I can copy SQL Script from Oracle SQL Developer into Excel and retain its formatting? I am a stickler for having legible, readable SQL and like to have all my columns lined up and aliases lined up. When we used to use SQL Navigator, the tab formatting seemed to copy and paste just fine. Now that we have migrated to Oracle SQL Developer, the formatting seems to get all messed up.
And suggestions are greatly appreciated and Thanks in advance for your review and am hopeful for an answer.
Thanks.
PSULionRP

I suppose you want a real tabulator instead of spaces. You can configure this in the preferences (SQL Formatter - Oracle). You have to apply it then to your existing code (e.g. CTRL-F7), but new code should get it right from the start.
Hope that helps,
K.

Getting windows error during running the sql scripts from form 6i

I made a little form application. The purpose of this application is to generate explain plan for a particular SQL. Some sql scripts run internally in order to populate the result on forms screen after pressing the forms button but I am getting windows error during running the sql scripts from form 6i.
I am using forms 6i with patch 17 with Oracle 10G database on windows 2000 professional on same computer.
This application runs fine with 8i.
Please inform me where the problem is and how to overcome it.
Zafri.

I am using Text_IO in my form's when button press trigger , inorder to create the
text file, then in the same when button press triger
I am calling RMAN via host command in order to run the script which was created by text_IO.
Below you find some of the code. I will appreciate if you solve the problem.
when button press trigger:
Declare
in_file3 Text_IO.File_Type;
linebuf3 VARCHAR2(1800);
output11 varchar2(1000);
BEGIN
     output11:='C:\EXPLAIN_PLUS\misc\rm_file.bat ';
Host(output11,no_screen);
:sql.execution_plan:= 'Working........................';
synchronize;
in_file3 := Text_IO.Fopen('c:\explain_plus\misc\create_table.txt', 'w');
Text_IO.Put_Line(in_file3, linebuf3);
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' run { sql "create table PLAN_TABLE (statement_id,...object_name varchar2(30),object_instance numeric,object_type varchar2(30),optimizer varchar2(255),search_columns number,id .....partition_start varchar2(255),partition_stop varchar2(255),partition_id numeric,other long,distribution varchar2(30)) "; } ');
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' ');
Text_IO.FCLOSE(in_file3)
          Declare
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
output VARCHAR2(1000);
output2 VARCHAR2(1000);
dummy varchar2(40);
in_file Text_IO.File_Type;
linebuf VARCHAR2(1800);
BEGIN
     Get_Connect_Info(un,pw,cn);
     /* for Plan_table Begg. Second INNER BLOCK */
     declare
          dummy2 varchar2(40);
     begin
     select table_name into dummy2 from all_tables where table_name='PLAN_TABLE';
     if dummy2 = 'PLAN_TABLE' then
     output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\MISC\TRUNC2.txt ' ;
Host(output2,no_screen);
     end if;
     exception
     when no_data_found     then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\misc\create_table.txt ';
Host(output2,no_screen);
     end; --

Calling sql script from pl/sql block

Hi
I want to call a sql script from pl/sql block.
like
CREATE OR REPLACE procedure DataBaseExport(user_name in varchar2, pwd in varchar2)
as
begin
execute immediate '@ C:\Documents and Settings\umesh\emp.sql';
end DataBaseExport;
/

Try something like this -
CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "Host" AS
import java.io.*;
public class Host
     public static void executeCommand(String command)
     try {
            String[] finalCommand;
               if (isWindows())
                    finalCommand = new String[4];
                    // Use the appropriate path for your windows version.
                    finalCommand[0] = "C:\\windows\\system32\\cmd.exe"; // Windows XP/2003
                    //finalCommand[0] = "C:\\winnt\\system32\\cmd.exe"; // Windows NT/2000
                    finalCommand[1] = "/y";
                    finalCommand[2] = "/c";
                    finalCommand[3] = command;
               else
                    finalCommand = new String[3];
                    finalCommand[0] = "/bin/sh";
                    finalCommand[1] = "-c";
                    finalCommand[2] = command;
          final Process pr = Runtime.getRuntime().exec(finalCommand);
         pr.waitFor();
         new Thread(new Runnable()
            public void run()
                  BufferedReader br_in = null;
               try
                    br_in = new BufferedReader(new InputStreamReader(pr.getInputStream()));
                    String buff = null;
                    while ((buff = br_in.readLine()) != null)
                              System.out.println("Process out :" + buff);
                           try {Thread.sleep(100); } catch(Exception e) {}
                    br_in.close();
               catch (IOException ioe)
                    System.out.println("Exception caught printing process output.");
                    ioe.printStackTrace();
             finally
                 try {
                          br_in.close();
                      } catch (Exception ex) {}
     ).start();
     new Thread(new Runnable()
       public void run()
            BufferedReader br_err = null;
            try
               br_err = new BufferedReader(new InputStreamReader(pr.getErrorStream()));
               String buff = null;
               while ((buff = br_err.readLine()) != null)
                    System.out.println("Process err :" + buff);
                    try
                       Thread.sleep(100);
                     } catch(Exception e) {}
               br_err.close();
           catch (IOException ioe)
               System.out.println("Exception caught printing process error.");
               ioe.printStackTrace();
          finally
              try
                      br_err.close();
               catch (Exception ex) {}
      ).start();
     catch (Exception ex)
              System.out.println(ex.getLocalizedMessage());
public static boolean isWindows()
          if (System.getProperty("os.name").toLowerCase().indexOf("windows") != -1)
          return true;
          else
          return false;
CREATE OR REPLACE PROCEDURE Host_Command (p_command IN VARCHAR2)
AS LANGUAGE JAVA
NAME 'Host.executeCommand (java.lang.String)';
--- THE PERMISSIONS ---
call dbms_java.grant_permission('SYSTEM', 'SYS:java.io.FilePermission', '<<ALL FILES>>', 'read ,write, execute, delete');
call dbms_java.grant_permission('SYSTEM', 'SYS:java.lang.RuntimePermission', 'writeFileDescriptor', '');
call dbms_java.grant_permission('SYSTEM', 'SYS:java.lang.RuntimePermission', 'readFileDescriptor', '');And, finally,
create or replace procedure call_sql_file(usr in varchar2,
                                          pwd in varchar2,
                                          host_str in varchar2)
is
begin
   host('sqlplus -s usr/pwd@host_str C:\UAX_Auto_Count.sql');
exception
when others then
    dbms_output.put_line(sqlerrm);
end;Now, you can pass all the argument in order to execute that file.
N.B.: Not Tested...
Regards.
Satyaki De.

Calling sql script from shell script

Hi,
I know this question has been asked many time in various forums, but I tried many combinations and not able to figure out what I'm missing.
Basically - I'm trying to call a sql script from a shell script.
This is my sql script (plsql.sql) -
DELCARE
v_empno NUMBER := '&empno';
BEGIN
select ename,sal from emp where empno = v_empno;
dbms_output.put_line('Inside the plsql file');
END;
This is my unix shell script - I'm caling the plsql.sql file with the parameter passed(97882). I don't get any output. at least I should be able to view the dbms output if not for the sql query inside the sql script.
#!/usr/bin/ksh
sqlplus -s sam/olo01 << HERE
@plsql.sql 97882;
HERE
What is it I am missing ?

Using your scripts (and having to create and populate a table myself, that would have what your select statement implies),
oracle:oklacity$ cat plsql.sql
DELCARE
v_empno NUMBER := '&empno';
BEGIN
select ename,sal from emp where empno = v_empno;
dbms_output.put_line('Inside the plsql file');
END;
oracle:oklacity$ cat doit.sh
#!/usr/bin/ksh
sqlplus -s sam/olo01 << HERE
@plsql.sql 97882;
HERE
oracle:oklacity$ ./doit.sh
SP2-0042: unknown command "DELCARE" - rest of line ignored.
SP2-0734: unknown command beginning "v_empno NU..." - rest of line ignored.
oracle:oklacity$
This is the kind of information you should have put in your opening post.

Running a sql script from stored procedure

Hi everyone!
Has anybody tell me how to execute a sql script from a stored
procedure!
Thanks in advance!
Sasa

>
Hi everyone!
Has anybody tell me how to execute a .sql file from a stored
procedure!
Thanks in advance!
Sasa Sorry, a .sql file!!

Calling a SQL script from the PL/SQL block.

Hello All,
I am using oracle 11g database.
My requirment is as follows. I have a SQL script to alter the table. But before alter the table I need to test some condition , if the condition satisfy then I have to alter the table through the SQL script. For the checking the condition I have to use the plsql block and inside I need to call the SQL script.
Can I call a SQL script from PL/SQL block, if yes then how?
I am tring to use START, RUN and @ command but it is throughing error.
Thanks
SUN

[PL/SQL manual|http://download.oracle.com/docs/cd/B10501_01/server.920/a96540/functions55a.htm#77600] Ctrl-F start, finds nothing. [SQLPlus manual|http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/toc.htm] Ctrl-F start finds this. Isn't it wonderful that Oracle documents this stuff so we don't have to guess.
Can I call a SQL script from PL/SQL block, if yes then how? No.
You could call the stored procedure in a SQL*Plus script before the alter table and have it raise an exception if the condition is not met and have the script quit when there is an error.

Execute .sql scripts from a remote login

Hello,
1) How do I execute a remote sql script from sqlplus?
SQL>@remote_server:$HOME/test_sql.sql ...this did not work, which would work?
2) Another question, in sqlplus I can do...! echo testing123>$HOME/test123.txt.
How do I do this within a store procedure?
This does not work, which would work?
declare
v_test varchar2(300) := '! echo testing123>$HOME/test123.txt';
begin
execute immediate v_test;
end;
/

Re Q2.
I take it that's an sqlplus feature on unix as it doesn't work on windows:
SQL> ! echo testing123>$HOME/test123.txt
SP2-0734: unknown command beginning "! echo tes..." - rest of line ignored.
SQL>Also the reason this isn't working from within PL/SQL is that the execute immediate statement is used to send SQL statements to the SQL engine. What you are attempting to do is to send sqlplus commands to the SQL engine which obviously knows nothing about sqlplus commands. Those commands are very specific to the sqlplus executable and will only work in that environment.
;)

Generate SQL scripts from Designer 6

Hi all,
Does anyone know how to generate an SQL-script from Designer? I want to maintain the code in the repository, and also document usages against the script. I've found ways to document the script, but then I can't generate it....
Thanks in advance,
Ronald

Ronald,
How did you record the SQL script in designer? As undefined pl/sql module (type= "null")?
If so, you cannot generate the script with the ddl generator. To do so you could change the type to procedure and make post-generation changes to the script (cut of f the procedure header and trailer lines). An other way to generate it is to write your own SQL script generator as a headstart utility. You might take a look at the html help file generator utility which does a similar job (create a o/s file based on the repository contents).
Let us know if you succeed.
Regards, Marc
null

Executing sql script from file, with multiple queries

Hello,
I am trying to load an SQL script from a file, parse the script into separate SQL statements, and execute each of them. The final statement will always be a query, and thus will return a result.
Three problems arise:
1. I don't know what TYPE of statement each one is (i.e. whether it is an UPDATE or a QUERY), which seems to be required in order to execute it in java (via executeQuery and executeUpdate).
2. I am not sure of the best way to execute a series of statements (the Statement object has some "batch" functionality, but I'm not sure if there is a better way, or even of the proper way to use this).
3. I need to be able to make sure the final statement is a QUERY, and thus will return a ResultSet. Otherwise I need to be able to throw an exception.
This has been causing me a lot of trouble. Any help would be much appreciated.
Thanks,
Kevin

Hi Kevin,
Have you got any solution for your mentioned problem????
I am facing almost the same kind of problem like I have some sql files containg simple sql statements as well as code for writting Procs , triggeres, index...functions..and so on. I need to execute this XYZ.sql file from Java side.
Can you guide me about my problem?????
Thanks in advance.............
Mak

Executing sql scripts from url

A nice feature of isqlplus was that we could execute a sql script stored on a
server from a browser on a client, using dynamic. Is ther any comparable
facility in APEX for executing a sql script from a browser?

Hi!
Here are some other threads to look at. Make sure to also look at the blog at the bottom of the 2nd thread. In the forum search set the date range to "all" and search on "run_cmd". You might have to look thru a few pages but there are several threads.
How to execute sqlplus command in html_db
Re: Returning dbms_output.putline type output to apex page
Re: RUN A DOS BATCH FILE FROM PLSQL...
Also go to ASKTOM (Tom Kyte) and search on "run_cmd":
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:3361193268672
This will give you several ideas!
Let us know if you can't get it working.
Dave Venus

How to execute sql scripts from Powershell across multiple databases

Re: How to execute sql scripts from Powershell across multiple databases
I have an tsql script that I want to run across a list of databases. How is the best way to do this in Powershell? Thanks.

My example below, using just the SMO and not breaking up the batches, the ExecuteWithResults give the following error when the .sql file contains a GO. My script files are as simple as a DECLARE and then a GO.
WARNING: SQL Script Failed
The object of type "Microsoft.PowerShell.Commands.Internal.Format.FormatStartData" is not valid or not in the correct sequence. This is likely caused by a user-specified "format-list" comm
and which is conflicting with the default formatting.
+ CategoryInfo : InvalidData: (:) [out-lineoutput], InvalidOperationException
+ FullyQualifiedErrorId : ConsoleLineOutputOutOfSequencePacket,Microsoft.PowerShell.Commands.OutLineOutputCommand
Also, when executing from the ISE, is there a way to force the ISE to release the files. I am having to close the ISE and reopen my script every time I want to make a testing change to the .sql file.
[reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo")
$scriptspath = "C:\temp\psExecuteSQLScripts\scripts"
$SQLServer = "fidevc10"
$SQLDB = "Bank03"
# Create SMO Server Object
$Server = New-Object ('Microsoft.SQLServer.Management.Smo.Server') $SQLServer
# Get SMO DB Object
$db = $Server.Databases[$SQLDB]
# Load All SQL Scripts in Directory
$scripts = Get-ChildItem -Path (Join-Path $scriptspath "*") -Include "*.sql" -Recurse
# Loop through each script and execute
foreach ($SQLScript in $scripts)
$fullpath = $SQLScript.FullName
# Read the Script File into Powershell Memory
$reader = New-Object System.IO.StreamReader($fullpath)
$script = $reader.ReadToEnd()
# Execute SQL
Write-Host "Executing $SQLScript on $SQLDB...."
try
$ds = $db.ExecuteWithResults($script)
Foreach ($t in $ds.Tables)
Foreach ($r in $t.Rows)
Foreach ($c in $t.Columns)
Write-Host $c.ColumnName "=" $r.Item($c)
Write-Host "Complete"
catch [Exception]
Write-Warning "SQL Script Failed"
echo $_.Exception|format-list -force
Write-Host " " -BackgroundColor DarkCyan

How to call SQL script from PL/SQL block

Hi All,
I have a pl/sql block from which i need to call a *.sql script file.
Please tell me that how can i do this?
Thanks and Regards.

> Though just for knowledge sake, would you please tell if there is a way
to call a sql script from a pl/sql block.
This question stems usually from a confusion about client-server and which is which in Oracle.
SQL*Plus is a client. PL/SQL is a server side language. SQL is a server side language.
When entering either one of these two languages in SQL*Plus (or TOAD, SQL-Developer, etc), the content is shipped to an Oracle server process, is parsed there, and is executed there.
The Oracle server process servicing the client can accept a single SQL statement or PL/SQL block at a time.
It cannot accept a block of SQL statements delimited with a semicolon. That is a client concept where the client will read each delimited statement and send that, one after the other (in synchronous call mode) to the Oracle server for execution.
The Oracle server does not have a "script parser". It understands SQL. It understands PL/SQL. And that is what it expects from the client.
Whether the client supports the SET command, the HOST command, SPOOL command, ability to run scripts, and so... have no bearing on what the server itself is capable of doing. The server does not care what feature set the client has. It is tasked with servicing the client via SQL and PL/SQL.
It is not tasked to support or emulate client features like running SQL scripts.
Nor confuse PL/SQL with the very limited command set of SQL*Plus. The two has nothing in common. And just as PL/SQL cannot understand C# or Delphi commands, it cannot understand SQL*Plus commands.

Utlrp.sql script from OEM

Similar Messages

Maybe you are looking for