Utmpx error Kernel Reader uptime error

I have 12k System controllers both with the same issue; a black splat on the Kernel Reader->System block. The log file indicates:
warning Dec 15 03:01:49 agent data update error: .iso.org.dod.[...].kernelReader.load.uptime
warning Dec 15 03:01:49 agent data update error: Unable to get boot time from utmpx
Anyone experience this before? Any suggestions welcome.
Regards,
Jeff Grabell

Hi Jeff,
Does the regular Solaris "uptime" command work on those hosts? I think uptime (and the SunMC kr package that gets the data for that part of Kernel Reader) get their information from /var/adm/utmpx(wtmpx?) files. Have you done anything on those boxes that would erase/truncate those files?
I'm just guessing here - I've never seen your problem before. Please post the solution if you figure it out.
Regards,
Mike Kirk
Standard disclaimer: I am an employee of Halcyon (www.HalcyonInc.com)

Similar Messages

  • Kernel: Read-error on swap-device (8:0:2778448)

    Last night I started par2 to repairing part of a large collection of file to make sure that the set of recovery data was good. This morning I was checking on it and saw "bus error (core dump)". I checked the systemd journal and saw the following.
    Oct 01 00:12:10 {computer-name} systemd-timesyncd[513]: interval/delta/delay/jitter/drift 2048s/-0.005s/0.083s/0.005s/+6ppm
    Oct 01 00:36:39 {computer-name} kernel: ata2.00: exception Emask 0x0 SAct 0x36c SErr 0x0 action 0x0
    Oct 01 00:36:59 {computer-name} kernel: ata2.00: irq_stat 0x40000008
    Oct 01 00:36:59 {computer-name} kernel: ata2.00: failed command: READ FPDMA QUEUED
    Oct 01 00:36:59 {computer-name} kernel: ata2.00: cmd 60/38:40:48:65:2a/00:00:00:00:00/40 tag 8 ncq 28672 in
    res 41/40:00:48:65:2a/00:00:00:00:00/40 Emask 0x409 (media error) <F>
    Oct 01 00:36:59 {computer-name} kernel: ata2.00: status: { DRDY ERR }
    Oct 01 00:37:00 {computer-name} kernel: ata2.00: error: { UNC }
    Oct 01 00:37:00 {computer-name} kernel: ata2.00: configured for UDMA/133
    Oct 01 00:37:00 {computer-name} kernel: sd 1:0:0:0: [sda] Unhandled sense code
    Oct 01 00:37:00 {computer-name} kernel: sd 1:0:0:0: [sda]
    Oct 01 00:37:00 {computer-name} kernel: Result: hostbyte=0x00 driverbyte=0x08
    Oct 01 00:37:00 {computer-name} kernel: sd 1:0:0:0: [sda]
    Oct 01 00:37:00 {computer-name} kernel: Sense Key : 0x3 [current] [descriptor]
    Oct 01 00:37:00 {computer-name} kernel: Descriptor sense data with sense descriptors (in hex):
    Oct 01 00:37:00 {computer-name} kernel: 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
    Oct 01 00:37:00 {computer-name} kernel: 00 2a 65 48
    Oct 01 00:37:00 {computer-name} kernel: sd 1:0:0:0: [sda]
    Oct 01 00:37:00 {computer-name} kernel: ASC=0x11 ASCQ=0x4
    Oct 01 00:37:00 {computer-name} kernel: sd 1:0:0:0: [sda] CDB:
    Oct 01 00:37:00 {computer-name} kernel: cdb[0]=0x28: 28 00 00 2a 65 48 00 00 38 00
    Oct 01 00:37:00 {computer-name} kernel: end_request: I/O error, dev sda, sector 2778440
    Oct 01 00:37:00 {computer-name} kernel: Read-error on swap-device (8:0:2778448)
    Oct 01 00:37:01 {computer-name} kernel: Read-error on swap-device (8:0:2778456)
    Oct 01 00:37:01 {computer-name} kernel: Read-error on swap-device (8:0:2778464)
    Oct 01 00:37:01 {computer-name} kernel: Read-error on swap-device (8:0:2778472)
    Oct 01 00:37:01 {computer-name} kernel: Read-error on swap-device (8:0:2778480)
    Oct 01 00:37:01 {computer-name} kernel: Read-error on swap-device (8:0:2778488)
    Oct 01 00:37:02 {computer-name} kernel: Read-error on swap-device (8:0:2778496)
    Oct 01 00:37:02 {computer-name} kernel: ata2: EH complete
    Oct 01 00:36:56 {computer-name} systemd-coredump[2139]: Coredump of 667 (par2) is larger than configured processing limit, refusing.
    Oct 01 00:36:57 {computer-name} systemd-coredump[2139]: Process 667 (par2) of user 1000 dumped core.
    Oct 01 00:46:18 {computer-name} systemd-timesyncd[513]: interval/delta/delay/jitter/drift 2048s/+0.000s/0.071s/0.005s/+6ppm
    A quick Google search lead to the assumption that this is due to a bad block, however I just tested it for bad block a few months ago. I'll check it again this after noon after work, but for now I wanted to get some other opinions. See if there is some other explanaition beyound a bad block.
    [edit] The result of "smartctl -a /dev/sda". It looks like I might have an issue with my cable or something from the UDMA count.
    === START OF INFORMATION SECTION ===
    Model Family: Western Digital VelociRaptor
    Device Model: WDC WD6000HLHX-01JJPV0
    Serial Number: {redacted}
    LU WWN Device Id: 5 0014ee 658312eaa
    Firmware Version: 04.05G04
    User Capacity: 600,127,266,816 bytes [600 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: 10000 rpm
    Device is: In smartctl database [for details use: -P show]
    ATA Version is: ATA8-ACS (minor revision not indicated)
    SATA Version is: SATA 2.6, 6.0 Gb/s
    Local Time is: Wed Oct 1 15:29:50 2014 EDT
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x82) Offline data collection activity
    was completed without error.
    Auto Offline Data Collection: Enabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 7860) seconds.
    Offline data collection
    capabilities: (0x7b) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 84) minutes.
    Conveyance self-test routine
    recommended polling time: ( 5) minutes.
    SCT capabilities: (0x303d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
    3 Spin_Up_Time 0x0027 234 232 021 Pre-fail Always - 3291
    4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1120
    5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
    7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
    9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 3963
    10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
    12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1060
    192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 120
    193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 999
    194 Temperature_Celsius 0x0022 120 114 000 Old_age Always - 30
    196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
    197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 10
    200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
    # 1 Extended offline Completed without error 00% 5 -
    # 2 Extended offline Aborted by host 90% 4 -
    # 3 Conveyance offline Aborted by host 90% 4 -
    # 4 Short offline Completed without error 00% 0 -
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    [edit2] Just to make sure, I checked and found that none of the other drives have UDMA CRC errors, even the one that shares the same controller.
    [edit3] Badblocks came back negative, and the previous time I tried this, just the night before, I didn't have any issues. I forgot to mention that last bit.
    Last edited by nstgc (2014-10-01 20:02:58)

    nomorewindows wrote:Try smartctl to see if it is showing anything.
    I will when I get home.
    I just remembered that I have another thread on these forums about my Steam library disappearing. My steam library is on a raid0 btrfs volume that does not include the drive that the swap partition is on. The point being that if this is a drive issue, it is unrelated to the previous problem. if its a different hardware issue or a software issue, it could still be related.
    [edit] The SMART information is in the opening thread now. It looks like it may be a cable issue.
    [edit2] Just to make sure, I checked and found that none of the other drives have UDMA CRC errors, even the one that shares the same controller.
    [edit3] Badblocks came back negative, and the previous time I tried this, just the night before, I didn't have any issues. I forgot to mention that last bit.
    Last edited by nstgc (2014-10-01 20:03:09)

  • Virt-install hangs at "Write protecting the kernel read-only data",

    I am trying to Install Oracle Linux 5.4 as a Paravirtualized Machine on an Oracle VM Server (2.2.1).
    Following are the steps that I followed:
    I have the dvd iso file on /OVS/iso_pool
    1. mkdir -p /el/EL5-x86
    2. mount -t iso9660 -o ro,loop /OVS/iso_pool/Enterprise-R5-U4-Server-x86_64-dvd.iso /el/EL5-x86
    3. service portmap start
    4. service nfs start
    5. exportfs *:/el/EL5-x86
    6. mkdir /OVS/running_pool/vm01
    7. virt-install
    and gave the following details
    Name of the virtual machine: vm01
    RAM:7168
    disk path: /OVS/running_pool/vm01/system.img
    disk space: 80GB
    graphics support: yes
    install location- nfs:OVM server ipaddress:/el/EL5-x86
    It starts the install, but hangs at
    XENBUS: Device with no driver: device/vbd/51713
    XENBUS: Device with no driver: device/vbd/51714
    XENBUS: Device with no driver: device/vif/0
    XENBUS: Device with no driver: device/console/0
    Initalizing network drop monitor service
    Write protecting the kernel read-only data: 483k
    Can you please help
    Thanks,
    Radhika

    Yes I am able to connect to the guest vnc console, and proceed with the install.
    I did, Choose a language, choose a keyboard, configure TCP/IP, Manual TCP/IP configuration, after this I am getting a message "That directory could not be mounted from the server"
    I tried giving the IPAdress of the OVM Server where the directory was mounted, nothing is working. I cannot proceed any further.

  • Config Reader/Kernel Reader Alarm Files

    Where are the files located for your Alarm Action? We have several 72+ CPU machines and don't really feel like manually setting alarms via the gui. Can I edit a file?
    Thanks

    Hi lmd,
    Where are the files located for your Alarm Action? We
    have several 72+ CPU machines and don't really feel
    like manually setting alarms via the gui. Can I edit
    a file?SunMC's "Managed Jobs" feature (Tools --> Managed Jobs) lets you automate this type of thing 2 ways:
    -a "Data Property" Task lets you set all those thresholds once on the Server, then you just pick what Agents to apply it to. And those tasks are stored so you can run them over and over
    -a "Configuration" Task lets you set up one Agent the way you want and template it's configuration and save it on your SunMC Server. Then you can apply that template to other Agents.
    Data Property tasks are good when you want to go tweak a few things on a lot of systems. Configuration tasks are better to grab the entire config of an Agent as a template or backup (i.e. you can make a "web server" template, and "Oracle" template etc and apply them as you need them).
    If you really want to edit files, the thresholds you set are stored on the Agent in <module>.dat or <module>+<instance>.dat files in /var/opt/SUNWsymon/cfg. i.e. if you edit thresholds in the Kernel Reader module, they will be saved into kernel-reader.dat.
    You can set your thresholds once, then copy the resulting file to another (stopped) Agent and start it up. The syntax of the file is simple, so you could also edit it and put in the thresholds you want.
    Note: Configuration Tasks are actually moving files around under-the-hood just like you asked about (using the SunMC web server to store and retrieve them). Hint: after making a Configuration task go look in /var/opt/SUNWsymon/mcp on your SunMC Server... it will contain the relevent .dat files from the Agent you templated.
    Regards,
    [email protected]
    http://www.HalcyonInc.com

  • How to make use out of Kernel Reader Software Rules??

    Each of my agents have a Kernel Reader module loaded but there are only two software rules defined (rknrd105 & rknrd106). There are many other software rules available but I don't know how to make use out of them. How do I add them to the module?? Please assist.
    Thanks in advance.
    Tony

    Each of my agents have a Kernel Reader module loaded but there are only two software rules defined (rknrd105 & rknrd106). There are many other software rules available but I don't know how to make use out of them. How do I add them to the module?? Please assist.
    Thanks in advance.
    Tony

  • Update kernel and recieved a "Machine check error"

    I was on Vacation this last weekend but was finally able to update today. Upgrade seemd fine, issued reboot command and instead of my normal reboot I was greeted with "machine check error" flashing in my upper left hand corner. Syslinux never came up. I powered off manually and pulled the battery, subsequent reboot went off without a hitch.
    pacman log
    [2013-09-09 18:12] [PACMAN] Running 'pacman -Syyu'
    [2013-09-09 18:12] [PACMAN] synchronizing package lists
    [2013-09-09 18:12] [PACMAN] starting full system upgrade
    [2013-09-09 18:13] [PACMAN] upgraded curl (7.32.0-1 -> 7.32.0-2)
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'default'
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck.img
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck.img
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'fallback'
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck-fallback.img -S autodetect
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Starting build: 3.11.0-1-ck
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck-fallback.img
    [2013-09-09 18:13] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-09 18:13] [ALPM-SCRIPTLET]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Thank you for using http://repo-ck.com/ for your linux-ck package needs.
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Note that the following CPU optimized packages are or could be available to you:
    [2013-09-09 18:13] [ALPM-SCRIPTLET] AMD : barcelona, bulldozer, kx, k10, piledriver
    [2013-09-09 18:13] [ALPM-SCRIPTLET] Intel : atom, core2, haswell, ivybridge, nehalem, p4, pentm, sandybridge, haswell
    [2013-09-09 18:13] [ALPM-SCRIPTLET]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Search via group name: pacman -Sg ck-ivybridge
    [2013-09-09 18:13] [ALPM-SCRIPTLET]
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> Post in the repo support thread if package group is unavailable for your architecture:
    [2013-09-09 18:13] [ALPM-SCRIPTLET] >>> https://bbs.archlinux.org/viewtopic.php?id=111715
    [2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge (3.10.10-1 -> 3.11-1)
    [2013-09-09 18:13] [PACMAN] upgraded linux-ck-sandybridge-headers (3.10.10-1 -> 3.11-1)
    [2013-09-09 18:13] [ALPM-SCRIPTLET] rmmod: ERROR: Module nvidia is not currently loaded
    [2013-09-09 18:13] [ALPM-SCRIPTLET] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2013-09-09 18:13] [PACMAN] upgraded nvidia-ck (325.15-5 -> 325.15-6)
    [2013-09-09 18:13] [PACMAN] upgraded parallel (20130722-1 -> 20130822-1)
    [2013-09-09 18:13] [PACMAN] upgraded portaudio (19_20111121-1 -> 19_20111121-2)
    [2013-09-09 18:13] [PACMAN] upgraded weechat (0.4.1-2 -> 0.4.1-4)
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Linux version 3.11.0-1-ck (squishy@ease) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Sep 9 08:00:27 EDT 2013
    [ 0.000000] Command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bac11fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bac12000-0x00000000bad8dfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bad8e000-0x00000000bad9bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bad9c000-0x00000000bad9dfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bad9e000-0x00000000bad9ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bada0000-0x00000000bade7fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bade8000-0x00000000baf2bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baf2c000-0x00000000baf91fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000baf92000-0x00000000baf97fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baf98000-0x00000000bafe7fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bafe8000-0x00000000baffcfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000baffd000-0x00000000baffffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffbfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. RC512/RC512, BIOS 06VQ.M024.20110212.SSH 02/12/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BC000000 mask FFC000000 uncachable
    [ 0.000000] 3 base 0BB000000 mask FFF000000 uncachable
    [ 0.000000] 4 base 100000000 mask F00000000 write-back
    [ 0.000000] 5 base 200000000 mask FC0000000 write-back
    [ 0.000000] 6 base 23FE00000 mask FFFE00000 uncachable
    [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbaffd max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b0d000, 0x01b0dfff] PGTABLE
    [ 0.000000] BRK [0x01b0e000, 0x01b0efff] PGTABLE
    [ 0.000000] BRK [0x01b0f000, 0x01b0ffff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23fc00000-0x23fdfffff]
    [ 0.000000] [mem 0x23fc00000-0x23fdfffff] page 2M
    [ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fbfffff]
    [ 0.000000] [mem 0x23c000000-0x23fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
    [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
    [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x40200000-0xbac11fff]
    [ 0.000000] [mem 0x40200000-0xbabfffff] page 2M
    [ 0.000000] [mem 0xbac00000-0xbac11fff] page 4k
    [ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
    [ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbad8e000-0xbad9bfff]
    [ 0.000000] [mem 0xbad8e000-0xbad9bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbad9e000-0xbad9ffff]
    [ 0.000000] [mem 0xbad9e000-0xbad9ffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbade8000-0xbaf2bfff]
    [ 0.000000] [mem 0xbade8000-0xbaf2bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbaf92000-0xbaf97fff]
    [ 0.000000] [mem 0xbaf92000-0xbaf97fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbafe8000-0xbaffcfff]
    [ 0.000000] [mem 0xbafe8000-0xbaffcfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x1fd18000-0x1fffefff]
    [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 SECCSD)
    [ 0.000000] ACPI: XSDT 00000000baffee18 0006C (v01 SECCSD LH43STAR 06222004 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000baf9bd98 000F4 (v04 SECCSD LH43STAR 06222004 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
    [ 0.000000] ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0xBAFE5E40/0x00000000BAFE5D40, using 32 (20130517/tbfadt-522)
    [ 0.000000] ACPI: DSDT 00000000baf84018 0866F (v01 SECCSD LH43STAR 00000000 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000bafe5e40 00040
    [ 0.000000] ACPI: APIC 00000000baffdf18 000CC (v02 SECCSD LH43STAR 06222004 MSFT 00010013)
    [ 0.000000] ACPI: HPET 00000000bafe6d18 00038 (v01 SECCSD LH43STAR 06222004 AMI. 00000003)
    [ 0.000000] ACPI: SLIC 00000000baf9cc18 00176 (v01 SECCSD LH43STAR 06222004 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000bafe6c98 0003C (v01 SECCSD LH43STAR 06222004 MSFT 00000097)
    [ 0.000000] ACPI: SSDT 00000000baf91018 00A1D (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000baf90018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000baf9a018 00D80 (v01 SgRef SgTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000baf98018 011E8 (v01 OptRef OptTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237400000-ffff88023f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xbac11fff]
    [ 0.000000] node 0: [mem 0xbad8e000-0xbad9bfff]
    [ 0.000000] node 0: [mem 0xbad9e000-0xbad9ffff]
    [ 0.000000] node 0: [mem 0xbade8000-0xbaf2bfff]
    [ 0.000000] node 0: [mem 0xbaf92000-0xbaf97fff]
    [ 0.000000] node 0: [mem 0xbafe8000-0xbaffcfff]
    [ 0.000000] node 0: [mem 0x100000000-0x23fdfffff]
    [ 0.000000] On node 0 totalpages: 2074398
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 157 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11879 pages used for memmap
    [ 0.000000] DMA32 zone: 760193 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20472 pages used for memmap
    [ 0.000000] Normal zone: 1310208 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbac12000-0xbad8dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbad9c000-0xbad9dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbada0000-0xbade7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaf2c000-0xbaf91fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaf98000-0xbafe7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbaffd000-0xbaffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffbfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffd7ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
    [ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s84096 r8192 d22400 u131072
    [ 0.000000] pcpu-alloc: s84096 r8192 d22400 u131072 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041826
    [ 0.000000] Kernel command line: initrd=/initramfs-linux-ck.img root=/dev/disk/by-uuid/0d909b36-6c1e-4652-abc6-5813297f38d5 rootflags=,relatime,data=ordered rootfstype=ext4 rw quiet vga=current elevator=noop BOOT_IMAGE=/vmlinuz-linux-ck
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8071168K/8297592K available (4912K kernel code, 725K rwdata, 1676K rodata, 1104K init, 1260K bss, 226424K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:1192 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1995.468 MHz processor
    [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.22 BogoMIPS (lpj=6651560)
    [ 0.000007] pid_max: default: 32768 minimum: 301
    [ 0.000051] Security Framework initialized
    [ 0.000058] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000069] Mount-cache hash table entries: 256
    [ 0.000253] Initializing cgroup subsys memory
    [ 0.000263] Initializing cgroup subsys devices
    [ 0.000265] Initializing cgroup subsys freezer
    [ 0.000267] Initializing cgroup subsys net_cls
    [ 0.000268] Initializing cgroup subsys blkio
    [ 0.000270] Initializing cgroup subsys bfqio
    [ 0.000294] CPU: Physical Processor ID: 0
    [ 0.000295] CPU: Processor Core ID: 0
    [ 0.000300] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.000303] mce: CPU supports 9 MCE banks
    [ 0.000318] CPU0: Thermal monitoring enabled (TM1)
    [ 0.000330] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 5
    [ 0.000467] Freeing SMP alternatives memory: 20K (ffffffff819cb000 - ffffffff819d0000)
    [ 0.001938] ACPI: Core revision 20130517
    [ 0.008675] ACPI: All ACPI Tables successfully acquired
    [ 0.016462] ftrace: allocating 19779 entries in 78 pages
    [ 0.027603] Switched APIC routing to physical flat.
    [ 0.028009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061003] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.061011] TSC deadline timer enabled
    [ 0.061026] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.061034] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.061036] ... version: 3
    [ 0.061037] ... bit width: 48
    [ 0.061038] ... generic registers: 4
    [ 0.061040] ... value mask: 0000ffffffffffff
    [ 0.061041] ... max period: 0000ffffffffffff
    [ 0.061042] ... fixed-purpose events: 3
    [ 0.061043] ... event mask: 000000070000000f
    [ 0.084503] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.071127] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7
    [ 0.164288] Brought up 8 CPUs
    [ 0.164293] smpboot: Total of 8 processors activated (31940.80 BogoMIPS)
    [ 0.172724] devtmpfs: initialized
    [ 0.174171] PM: Registering ACPI NVS region [mem 0xbaf2c000-0xbaf91fff] (417792 bytes)
    [ 0.174179] PM: Registering ACPI NVS region [mem 0xbaf98000-0xbafe7fff] (327680 bytes)
    [ 0.175128] RTC time: 1:14:39, date: 09/10/13
    [ 0.175188] NET: Registered protocol family 16
    [ 0.175350] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.175353] ACPI: bus type PCI registered
    [ 0.175355] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.175429] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.175432] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.185354] PCI: Using configuration type 1 for base access
    [ 0.186084] bio: create slab <bio-0> at 0
    [ 0.186285] ACPI: Added _OSI(Module Device)
    [ 0.186287] ACPI: Added _OSI(Processor Device)
    [ 0.186289] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.186291] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.187915] ACPI: EC: Look up EC in DSDT
    [ 0.189513] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.239236] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.241431] ACPI: SSDT 00000000badba718 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.241847] ACPI: Dynamic OEM Table Load:
    [ 0.241850] ACPI: SSDT (null) 00661 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
    [ 0.252823] ACPI: SSDT 00000000badbba98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.253271] ACPI: Dynamic OEM Table Load:
    [ 0.253273] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
    [ 0.266019] ACPI: SSDT 00000000badb9d98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 0.266428] ACPI: Dynamic OEM Table Load:
    [ 0.266430] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
    [ 1.207371] ACPI: Interpreter enabled
    [ 1.207386] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 1.207404] ACPI: (supports S0 S1 S3 S4 S5)
    [ 1.207406] ACPI: Using IOAPIC for interrupt routing
    [ 1.207438] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.207580] ACPI: No dock devices found.
    [ 1.221274] ACPI: Power Resource [FN00] (off)
    [ 1.221369] ACPI: Power Resource [FN01] (off)
    [ 1.222064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.222103] \_SB_.PCI0:_OSC invalid UUID
    [ 1.222105] _OSC request data:1 8 0
    [ 1.222659] PCI host bridge to bus 0000:00
    [ 1.222663] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 1.222665] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 1.222668] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 1.222670] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 1.222672] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 1.222674] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 1.222676] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 1.222678] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 1.222680] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 1.222682] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 1.222684] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 1.222686] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 1.222695] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 1.222797] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 1.222833] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.222921] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 1.222933] pci 0000:00:02.0: reg 0x10: [mem 0xf5400000-0xf57fffff 64bit]
    [ 1.222941] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 1.222951] pci 0000:00:02.0: reg 0x20: [io 0xe000-0xe03f]
    [ 1.223070] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 1.223097] pci 0000:00:16.0: reg 0x10: [mem 0xf760a000-0xf760a00f 64bit]
    [ 1.223179] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.223280] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 1.223304] pci 0000:00:1a.0: reg 0x10: [mem 0xf7608000-0xf76083ff]
    [ 1.223402] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.223495] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 1.223514] pci 0000:00:1b.0: reg 0x10: [mem 0xf7600000-0xf7603fff 64bit]
    [ 1.223588] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.223678] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 1.223764] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.223823] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 1.223866] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 1.223952] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 1.224010] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 1.224050] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
    [ 1.224135] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 1.224238] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 1.224262] pci 0000:00:1d.0: reg 0x10: [mem 0xf7607000-0xf76073ff]
    [ 1.224360] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.224451] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 1.224646] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 1.224668] pci 0000:00:1f.2: reg 0x10: [io 0xe0b0-0xe0b7]
    [ 1.224677] pci 0000:00:1f.2: reg 0x14: [io 0xe0a0-0xe0a3]
    [ 1.224686] pci 0000:00:1f.2: reg 0x18: [io 0xe090-0xe097]
    [ 1.224695] pci 0000:00:1f.2: reg 0x1c: [io 0xe080-0xe083]
    [ 1.224704] pci 0000:00:1f.2: reg 0x20: [io 0xe060-0xe07f]
    [ 1.224714] pci 0000:00:1f.2: reg 0x24: [mem 0xf7606000-0xf76067ff]
    [ 1.224763] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.224847] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 1.224866] pci 0000:00:1f.3: reg 0x10: [mem 0xf7605000-0xf76050ff 64bit]
    [ 1.224889] pci 0000:00:1f.3: reg 0x20: [io 0xe040-0xe05f]
    [ 1.225036] pci 0000:01:00.0: [10de:0dec] type 00 class 0x030200
    [ 1.225046] pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
    [ 1.225055] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 1.225065] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
    [ 1.225072] pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
    [ 1.225079] pci 0000:01:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
    [ 1.232978] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.232986] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.232994] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
    [ 1.233003] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 1.233136] pci 0000:02:00.0: [8086:0087] type 00 class 0x028000
    [ 1.233183] pci 0000:02:00.0: reg 0x10: [mem 0xf6c00000-0xf6c01fff 64bit]
    [ 1.233407] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 1.243003] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.243013] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.243022] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
    [ 1.243037] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
    [ 1.243204] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 1.243274] pci 0000:03:00.0: reg 0x10: [io 0xb000-0xb0ff]
    [ 1.243396] pci 0000:03:00.0: reg 0x18: [mem 0xe2c04000-0xe2c04fff 64bit pref]
    [ 1.243467] pci 0000:03:00.0: reg 0x20: [mem 0xe2c00000-0xe2c03fff 64bit pref]
    [ 1.243797] pci 0000:03:00.0: supports D1 D2
    [ 1.243799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.253026] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 1.253036] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
    [ 1.253045] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
    [ 1.253060] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
    [ 1.253163] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
    [ 1.253193] pci 0000:04:00.0: reg 0x10: [mem 0xf5800000-0xf5801fff 64bit]
    [ 1.253333] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    [ 1.263010] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 1.263020] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
    [ 1.263029] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
    [ 1.263043] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 1.263086] pci_bus 0000:00: on NUMA node 0
    [ 1.263130] \_SB_.PCI0:_OSC invalid UUID
    [ 1.263131] _OSC request data:1 1f 0
    [ 1.263135] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 1.263137] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 1.263659] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.263721] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 1.263779] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 1.263838] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 10 11 12 14 15)
    [ 1.263896] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.263956] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 1.264015] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 10 11 12 14 15)
    [ 1.264073] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 10 11 12 14 15)
    [ 1.264724] ACPI: Enabled 6 GPEs in block 00 to 3F
    [ 1.264732] ACPI: \_SB_.PCI0: notify handler is installed
    [ 1.264797] Found 1 acpi root devices
    [ 1.264842] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.264936] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.264940] vgaarb: loaded
    [ 1.264941] vgaarb: bridge control possible 0000:00:02.0
    [ 1.264981] PCI: Using ACPI for IRQ routing
    [ 1.266623] PCI: pci_cache_line_size set to 64 bytes
    [ 1.266695] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
    [ 1.266697] e820: reserve RAM buffer [mem 0xbac12000-0xbbffffff]
    [ 1.266700] e820: reserve RAM buffer [mem 0xbad9c000-0xbbffffff]
    [ 1.266702] e820: reserve RAM buffer [mem 0xbada0000-0xbbffffff]
    [ 1.266705] e820: reserve RAM buffer [mem 0xbaf2c000-0xbbffffff]
    [ 1.266706] e820: reserve RAM buffer [mem 0xbaf98000-0xbbffffff]
    [ 1.266708] e820: reserve RAM buffer [mem 0xbaffd000-0xbbffffff]
    [ 1.266710] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
    [ 1.266803] NetLabel: Initializing
    [ 1.266805] NetLabel: domain hash size = 128
    [ 1.266806] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.266821] NetLabel: unlabeled traffic allowed by default
    [ 1.266851] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.266857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.268893] Switched to clocksource hpet
    [ 1.273524] pnp: PnP ACPI init
    [ 1.273541] ACPI: bus type PNP registered
    [ 1.273643] system 00:00: [io 0x06a4] has been reserved
    [ 1.273646] system 00:00: [io 0x06a0] has been reserved
    [ 1.273650] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.273660] pnp 00:01: [dma 4]
    [ 1.273681] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.273705] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.273820] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.273850] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.273897] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.273900] system 00:05: [io 0x1000-0x100f] has been reserved
    [ 1.273902] system 00:05: [io 0xffff] has been reserved
    [ 1.273904] system 00:05: [io 0xffff] has been reserved
    [ 1.273907] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 1.273909] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 1.273911] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.273913] system 00:05: [io 0x0a00-0x0a03] has been reserved
    [ 1.273915] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.273918] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.273966] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.274009] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 1.274013] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 1.274065] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.274118] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
    [ 1.274348] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.274351] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
    [ 1.274353] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.274355] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.274358] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.274360] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.274362] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 1.274364] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.274367] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.274369] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.274372] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
    [ 1.274375] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.274919] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
    [ 1.274921] system 00:0b: [mem 0x40000000-0x401fffff] has been reserved
    [ 1.274924] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 1.274936] pnp: PnP ACPI: found 12 devices
    [ 1.274937] ACPI: bus type PNP unregistered
    [ 1.281089] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 1.281093] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.281097] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf50fffff]
    [ 1.281100] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 1.281104] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 1.281108] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.281114] pci 0000:00:1c.0: bridge window [mem 0xf6c00000-0xf75fffff]
    [ 1.281118] pci 0000:00:1c.0: bridge window [mem 0xe3700000-0xe40fffff 64bit pref]
    [ 1.281125] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 1.281129] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
    [ 1.281135] pci 0000:00:1c.3: bridge window [mem 0xf6200000-0xf6bfffff]
    [ 1.281140] pci 0000:00:1c.3: bridge window [mem 0xe2c00000-0xe35fffff 64bit pref]
    [ 1.281147] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 1.281150] pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
    [ 1.281156] pci 0000:00:1c.4: bridge window [mem 0xf5800000-0xf61fffff]
    [ 1.281161] pci 0000:00:1c.4: bridge window [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 1.281460] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.281462] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.281464] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.281466] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.281468] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.281470] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.281472] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.281474] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.281476] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.281478] pci_bus 0000:00: resource 13 [mem 0xbfa00000-0xfeafffff]
    [ 1.281480] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
    [ 1.281482] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.281484] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf50fffff]
    [ 1.281486] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 1.281488] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.281490] pci_bus 0000:02: resource 1 [mem 0xf6c00000-0xf75fffff]
    [ 1.281492] pci_bus 0000:02: resource 2 [mem 0xe3700000-0xe40fffff 64bit pref]
    [ 1.281494] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.281496] pci_bus 0000:03: resource 1 [mem 0xf6200000-0xf6bfffff]
    [ 1.281498] pci_bus 0000:03: resource 2 [mem 0xe2c00000-0xe35fffff 64bit pref]
    [ 1.281500] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.281502] pci_bus 0000:04: resource 1 [mem 0xf5800000-0xf61fffff]
    [ 1.281504] pci_bus 0000:04: resource 2 [mem 0xe2100000-0xe2afffff 64bit pref]
    [ 1.281541] NET: Registered protocol family 2
    [ 1.281696] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.281865] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.282015] TCP: Hash tables configured (established 65536 bind 65536)
    [ 1.282036] TCP: reno registered
    [ 1.282039] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.282068] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 1.282163] NET: Registered protocol family 1
    [ 1.282176] pci 0000:00:02.0: Boot video device
    [ 1.529060] PCI: CLS 64 bytes, default 64
    [ 1.529098] Unpacking initramfs...
    [ 1.590479] Freeing initrd memory: 2972K (ffff88001fd18000 - ffff88001ffff000)
    [ 1.591336] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.591340] software IO TLB [mem 0xb6c12000-0xbac12000] (64MB) mapped at [ffff8800b6c12000-ffff8800bac11fff]
    [ 1.591697] Scanning for low memory corruption every 60 seconds
    [ 1.592068] audit: initializing netlink socket (disabled)
    [ 1.592079] type=2000 audit(1378775680.569:1): initialized
    [ 1.605419] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.606685] zbud: loaded
    [ 1.606816] VFS: Disk quotas dquot_6.5.2
    [ 1.606867] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.607049] msgmni has been set to 15769
    [ 1.607262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.607320] io scheduler noop registered (default)
    [ 1.607324] io scheduler deadline registered
    [ 1.607360] io scheduler cfq registered
    [ 1.607365] io scheduler bfq registered
    [ 1.607452] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.607633] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.607648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.607731] intel_idle: MWAIT substates: 0x21120
    [ 1.607733] intel_idle: v0.4 model 0x2A
    [ 1.607734] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.607793] GHES: HEST is not enabled!
    [ 1.607848] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.608292] Linux agpgart interface v0.103
    [ 1.608376] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
    [ 1.611674] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.611689] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.611796] mousedev: PS/2 mouse device common for all mice
    [ 1.611968] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.611998] rtc_cmos 00:06: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 1.612007] Intel P-state driver initializing.
    [ 1.612017] Intel pstate controlling: cpu 0
    [ 1.612032] Intel pstate controlling: cpu 1
    [ 1.612043] Intel pstate controlling: cpu 2
    [ 1.612054] Intel pstate controlling: cpu 3
    [ 1.612065] Intel pstate controlling: cpu 4
    [ 1.612076] Intel pstate controlling: cpu 5
    [ 1.612089] Intel pstate controlling: cpu 6
    [ 1.612100] Intel pstate controlling: cpu 7
    [ 1.612312] cpuidle: using governor ladder
    [ 1.612573] cpuidle: using governor menu
    [ 1.612636] drop_monitor: Initializing network drop monitor service
    [ 1.612712] TCP: cubic registered
    [ 1.612809] NET: Registered protocol family 10
    [ 1.612992] NET: Registered protocol family 17
    [ 1.613001] Key type dns_resolver registered
    [ 1.613275] PM: Hibernation image not present or could not be loaded.
    [ 1.613285] registered taskstats version 1
    [ 1.613900] Magic number: 13:40:205
    [ 1.613944] acpi device:2d: hash matches
    [ 1.613991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.614015] rtc_cmos 00:06: setting system clock to 2013-09-10 01:14:41 UTC (1378775681)
    [ 1.614893] Freeing unused kernel memory: 1104K (ffffffff818b7000 - ffffffff819cb000)
    [ 1.614895] Write protecting the kernel read-only data: 8192k
    [ 1.619318] Freeing unused kernel memory: 1220K (ffff8800014cf000 - ffff880001600000)
    [ 1.620313] Freeing unused kernel memory: 372K (ffff8800017a3000 - ffff880001800000)
    [ 1.620314] BFS CPU scheduler v0.441 by Con Kolivas.
    [ 1.627488] systemd-udevd[77]: starting version 204
    [ 1.629471] SCSI subsystem initialized
    [ 1.630602] ACPI: bus type ATA registered
    [ 1.630697] libata version 3.00 loaded.
    [ 1.631357] ahci 0000:00:1f.2: version 3.0
    [ 1.631500] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 1.642171] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0WARNINGx5 impl SATA mode
    [ 1.642175] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 1.642181] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.649744] scsi0 : ahciWARNING
    [ 1.650013] scsi1 : ahci
    [ 1.650141] scsi2 : ahci
    [ 1.650269] scsi3 : ahci
    [ 1.650401] scsi4 : ahci
    [ 1.650493] scsi5 : ahci
    [ 1.650686] ata1: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606100 irq 41
    [ 1.650690] ata2: DUMMY
    [ 1.650694] ata3: SATA max UDMA/133 abar m2048@0xf7606000 port 0xf7606200 irq 41
    [ 1.650696] ata4: DUMMY
    [ 1.650698] ata5: DUMMY
    [ 1.650700] ata6: DUMMY
    [ 1.968795] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.968841] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.969674] ata1.00: ATA-9: M4-CT256M4SSD2, 010G, max UDMA/100
    [ 1.969683] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.970728] ata1.00: configured for UDMA/100
    [ 1.970980] scsi 0:0:0:0: Direct-Access ATA M4-CT256M4SSD2 010G PQ: 0 ANSI: 5
    [ 1.971592] ata3.00: ATAPI: TSSTcorp DVDWBD TS-LB23A, SC01, max UDMA/100
    [ 1.972317] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 1.972530] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.972535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.972581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.972980] ata3.00: configured for UDMA/100
    [ 1.974516] sda: sda1 sda2 sda3 sda4 sda5 sda6
    [ 1.975127] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.976456] scsi 2:0:0:0: CD-ROM TSSTcorp DVDWBD TS-LB23A SC01 PQ: 0 ANSI: 5
    [ 1.979211] ACPI: bus type USB registered
    [ 1.979276] usbcore: registered new interface driver usbfs
    [ 1.979339] usbcore: registered new interface driver hub
    [ 1.979451] usbcore: registered new device driver usb
    [ 1.980016] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 1.980024] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
    [ 1.980224] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X
    [ 1.980231] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
    [ 1.980237] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
    [ 1.980244] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
    [ 1.980251] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
    [ 1.980257] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
    [ 1.980264] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
    [ 1.980271] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
    [ 1.980520] xHCI xhci_add_endpoint called for root hub
    [ 1.980523] xHCI xhci_check_bandwidth called for root hub
    [ 1.980554] hub 1-0:1.0: USB hub found
    [ 1.980561] hub 1-0:1.0: 2 ports detected
    [ 1.980645] xhci_hcd 0000:04:00.0: xHCI Host Controller
    [ 1.980666] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
    [ 1.983135] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.983140] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.983305] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.983767] xHCI xhci_add_endpoint called for root hub
    [ 1.983769] xHCI xhci_check_bandwidth called for root hub
    [ 1.983799] hub 2-0:1.0: USB hub found
    [ 1.983808] hub 2-0:1.0: 2 ports detected
    [ 2.042830] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 2.075045] ehci-pci: EHCI PCI platform driver
    [ 2.075169] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 2.075177] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 2.075185] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 2.075200] ehci-pci 0000:00:1a.0: debug port 2
    [ 2.079109] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 2.079130] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7608000
    [ 2.088648] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 2.089496] hub 3-0:1.0: USB hub found
    [ 2.089505] hub 3-0:1.0: 2 ports detected
    [ 2.089935] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 2.089946] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 2.089954] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 2.089976] ehci-pci 0000:00:1d.0: debug port 2
    [ 2.093871] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 2.093888] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7607000
    [ 2.101986] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 2.102116] hub 4-0:1.0: USB hub found
    [ 2.102121] hub 4-0:1.0: 2 ports detected
    [ 2.134853] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 2.199793] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 2.201658] systemd[1]: Set hostname to <watson>.
    [ 2.268492] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 2.268851] systemd[1]: Starting Collect Read-Ahead Data...
    [ 2.269341] systemd[1]: Starting Replay Read-Ahead Data...
    [ 2.269709] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 2.269820] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 2.269852] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    [ 2.269873] systemd[1]: Starting Syslog Socket.
    [ 2.269927] systemd[1]: Listening on Syslog Socket.
    [ 2.269946] systemd[1]: Starting Remote File Systems.
    [ 2.269961] systemd[1]: Reached target Remote File Systems.
    [ 2.269975] systemd[1]: Starting Delayed Shutdown Socket.
    [ 2.270017] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 2.270038] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 2.270074] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 2.270088] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 2.270126] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 2.270140] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 2.270168] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 2.270210] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 2.270352] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 2.270370] systemd[1]: Starting Encrypted Volumes.
    [ 2.270384] systemd[1]: Reached target Encrypted Volumes.
    [ 2.270402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 2.270449] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 2.270464] systemd[1]: Starting Paths.
    [ 2.270478] systemd[1]: Reached target Paths.
    [ 2.270494] systemd[1]: Starting Journal Socket.
    [ 2.270543] systemd[1]: Listening on Journal Socket.
    [ 2.270567] systemd[1]: Mounting POSIX Message Queue File System...
    [ 2.270849] systemd[1]: Mounting Debug File System...
    [ 2.271238] systemd[1]: Starting Create static device nodes in /dev...
    [ 2.271494] systemd-readahead[136]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
    [ 2.271888] systemd[1]: Starting Journal Service...
    [ 2.272443] systemd[1]: Started Journal Service.
    [ 2.272532] systemd[1]: Mounting Huge Pages File System...
    [ 2.273048] systemd[1]: Starting udev Kernel Socket.
    [ 2.273080] systemd[1]: Listening on udev Kernel Socket.
    [ 2.273155] systemd[1]: Starting udev Control Socket.
    [ 2.273189] systemd[1]: Listening on udev Control Socket.
    [ 2.273294] systemd[1]: Starting udev Coldplug all Devices...
    [ 2.273733] systemd[1]: Starting Swap.
    [ 2.273754] systemd[1]: Reached target Swap.
    [ 2.273772] systemd[1]: Expecting device dev-disk-by\x2duuid-06ee03bc\x2dca64\x2d406d\x2dbe45\x2db2b645137e08.device...
    [ 2.273786] systemd[1]: Expecting device dev-disk-by\x2duuid-5aedfe61\x2d50f2\x2d47c7\x2d82ac\x2d79930ee37462.device...
    [ 2.294504] systemd-sysctl[154]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 2.298123] EXT4-fs (sda5): re-mounted. Opts: discard
    [ 2.306988] systemd-udevd[161]: starting version 204
    [ 2.330645] FS-Cache: Loaded
    [ 2.344801] ACPI: Requesting acpi_cpufreq
    [ 2.345279] wmi: Mapper loaded
    [ 2.345847] RPC: Registered named UNIX socket transport module.
    [ 2.345849] RPC: Registered udp transport module.
    [ 2.345850] RPC: Registered tcp transport module.
    [ 2.345851] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 2.355607] FS-Cache: Netfs 'nfs' registered for caching
    [ 2.358082] ACPI: Battery Slot [BAT1] (battery present)
    [ 2.358579] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 2.358604] ACPI: Lid Switch [LID0]
    [ 2.359113] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 2.359119] ACPI: Power Button [PWRB]
    [ 2.359456] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 2.359461] ACPI: Sleep Button [SLPB]
    [ 2.359772] ACPI: AC Adapter [ADP1] (off-line)
    [ 2.360090] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 2.360096] ACPI: Power Button [PWRF]
    [ 2.374300] ACPI: Fan [FAN0] (off)
    [ 2.374551] ACPI: Fan [FAN1] (off)
    [ 2.375124] ACPI: Invalid active2 threshold
    [ 2.377341] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
    [ 2.377349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377354] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
    [ 2.377358] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
    [ 2.377362] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377364] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
    [ 2.377368] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
    [ 2.377372] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377373] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
    [ 2.377377] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20130517/utaddress-251)
    [ 2.377381] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.377383] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.378357] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.378361] ACPI: Thermal Zone [TZ00] (52 C)
    [ 2.383745] ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)
    [ 2.383753] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.383911] mei_me 0000:00:16.0: setting latency timer to 64
    [ 2.383955] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X
    [ 2.386775] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 2.388164] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.388178] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.388494] r8169 0000:03:00.0: irq 51 for MSI/MSI-X
    [ 2.392549] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90004622000, e8:11:32:25:4e:78, XID 0c200000 IRQ 51
    [ 2.392554] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.394650] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.395234] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 2.396342] [drm] Initialized drm 1.1.0 20060810
    [ 2.397019] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.397023] ACPI: Thermal Zone [TZ01] (52 C)
    [ 2.403428] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.403432] Copyright(c) 2003-2013 Intel Corporation
    [ 2.403550] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 2.403625] iwlwifi 0000:02:00.0: irq 52 for MSI/MSI-X
    [ 2.413574] iwlwifi 0000:02:00.0: loaded firmware version 41.28.5.1 build 33926 op_mode iwldvm
    [ 2.414850] snd_hda_intel 0000:00:1b.0: irq 53 for MSI/MSI-X
    [ 2.459516] samsung_laptop: detected SABI interface: SwSmi@
    [ 2.459520] samsung_laptop: Backlight controlled by ACPI video driver
    [ 2.475073] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.475258] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.475342] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 2.479302] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.479307] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.479310] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.479312] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
    [ 2.479315] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84
    [ 2.479382] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 2.486443] [drm] Memory usable by graphics device = 2048M
    [ 2.486454] i915 0000:00:02.0: setting latency timer to 64
    [ 2.510361] iTCO_vendor_support: vendor-support=0
    [ 2.510974] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.511063] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.511169] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.515715] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.522955] hub 3-1:1.0: USB hub found
    [ 2.523029] hub 3-1:1.0: 6 ports detected
    [ 2.552940] i915 0000:00:02.0: irq 54 for MSI/MSI-X
    [ 2.552952] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.552953] [drm] Driver supports precise vblank timestamp query.
    [ 2.552974] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 2.553071] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 2.554259] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.582133] [drm] Wrong MCH_SSKPD value: 0x17050407
    [ 2.582136] [drm] This can cause pipe underruns and display issues.
    [ 2.582137] [drm] Please upgrade your BIOS to fix this.
    [ 2.591839] tsc: Refined TSC clocksource calibration: 1995.467 MHz
    [ 2.597052] fbcon: inteldrmfb (fb0) is primary device
    [ 2.631810] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 2.691536] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
    [ 2.697765] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
    [ 2.708392] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard
    [ 2.726771] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 2.732165] systemd-logind[678]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 2.732251] systemd-logind[678]: Watching system buttons on /dev/input/event2 (Power Button)
    [ 2.732373] systemd-logind[678]: Watching system buttons on /dev/input/event1 (Lid Switch)
    [ 2.732460] systemd-logind[678]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 2.733090] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 2.755620] hub 4-1:1.0: USB hub found
    [ 2.755733] hub 4-1:1.0: 6 ports detected
    [ 2.821911] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
    [ 3.108586] usb 4-1.3: new high-speed USB device number 3 using ehci-pci
    [ 3.308514] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
    [ 3.322812] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x15, 0x0c.
    [ 3.395720] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
    [ 3.568352] Console: switching to colour frame buffer device 170x48
    [ 3.574903] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 3.574905] i915 0000:00:02.0: registered panic notifier
    [ 3.575357] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 3.593033] Switched to clocksource tsc
    [ 3.594635] media: Linux media interface: v0.10
    [ 3.601441] Linux video capture interface: v2.00
    [ 3.607344] uvcvideo: Found UVC 1.00 device WebCam SCB-1110M (1210:0909)
    [ 3.612805] input: WebCam SCB-1110M as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input10
    [ 3.612886] usbcore: registered new interface driver uvcvideo
    [ 3.612889] USB Video Class driver (1.1.1)
    [ 3.624759] acpi device:47: registered as cooling_device10
    [ 3.628631] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 3.628749] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:45/LNXVIDEO:00/input/input11
    [ 3.631116] acpi device:51: registered as cooling_device11
    [ 3.631300] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 3.631373] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
    [ 3.631455] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 3.645951] i2400m_usb 4-1.3:1.0: WiMAX interface wmx0 (64:d4:da:24:b5:c0) ready
    [ 3.653985] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.654187] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
    [ 3.874277] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 3.874474] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
    [ 3.963960] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4.328298] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 7.107250] i2400m_usb 4-1.3:1.0: firmware interface version 9.3.2
    [ 7.117012] usbcore: registered new interface driver i2400m_usb
    [ 7.141746] wlan0: authenticate with 00:22:6b:70:c5:e9
    [ 7.151167] wlan0: send auth to 00:22:6b:70:c5:e9 (try 1/3)
    [ 7.197933] wlan0: authenticated
    [ 7.200356] wlan0: associate with 00:22:6b:70:c5:e9 (try 1/3)
    [ 7.201891] wlan0: RX AssocResp from 00:22:6b:70:c5:e9 (capab=0x11 status=0 aid=2)
    [ 7.205520] wlan0: associated
    [ 7.205524] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 16.681425] bbswitch: version 0.7
    [ 16.681440] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 16.681445] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
    [ 16.681454] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 16.681520] bbswitch: detected an Optimus _DSM function
    [ 16.681556] bbswitch: disabling discrete graphics
    [ 16.681559] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130517/nsarguments-95)
    [ 16.711802] pci 0000:01:00.0: power state changed by ACPI to D3cold
    [ 16.711812] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
    [ 41.636100] fuse init (API version 7.22)
    [ 440.485588] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 440.507912] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 453.967678] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 453.984936] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    I have never seen this error and my googlefu return issues with overclocking which I am not doing. Any info on the subject I'd love to hear.
    Cheers.
    EDIT: Was only happening when issuing 'systemctl reboot' so I switched back to 3.10.10-1-ARCH and reboot command now works.
    Last edited by doug piston (2013-09-10 02:05:56)

    Well, I can tell you that this kind of error is not OS related, but rather a HW thing.  It happens where there is a general detection of something going wrong.  Sometimes it can happen randomly and might not be an indication of a problem.  But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors. 
    Unfortunately I don't really know what to do about such things except give you machine a proper inspection.  But if things are working fine, and continue to do so, I wouldn't worry about it.  If it becomes a regular occurance, then I'd worry.

  • Kernel error in 3.6.4 (radeon TTM related)

    Nov 01 16:49:32 mainland kernel: [TTM] Failed to find memory space for buffer 0xffff88030d17c048 eviction
    Nov 01 16:49:32 mainland kernel: [TTM] No space for ffff88030d17c048 (2400 pages, 9600K, 9M)
    Nov 01 16:49:32 mainland kernel: [TTM] placement[0]=0x00070002 (1)
    Nov 01 16:49:32 mainland kernel: [TTM] has_type: 1
    Nov 01 16:49:32 mainland kernel: [TTM] use_type: 1
    Nov 01 16:49:32 mainland kernel: [TTM] flags: 0x0000000A
    Nov 01 16:49:32 mainland kernel: [TTM] gpu_offset: 0x40000000
    Nov 01 16:49:32 mainland kernel: [TTM] size: 131072
    Nov 01 16:49:32 mainland kernel: [TTM] available_caching: 0x00070000
    Nov 01 16:49:32 mainland kernel: [TTM] default_caching: 0x00010000
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00000000-0x00000001: 1: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00000001-0x00000011: 16: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00000011-0x00000111: 256: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00000111-0x00000211: 256: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00000211-0x0000024f: 62: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000024f-0x00000b19: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00000b19-0x00000b20: 7: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00000b20-0x00001480: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00001480-0x00001de0: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00001de0-0x00002740: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00002740-0x000030a0: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x000030a0-0x00003a00: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00003a00-0x00004360: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00004360-0x00004cc0: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00004cc0-0x00005290: 1488: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00005290-0x00005b5a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00005b5a-0x00005b60: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00005b60-0x000064c0: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x000064c0-0x00006e20: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00006e20-0x000076ea: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x000076ea-0x000076f0: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x000076f0-0x00008050: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00008050-0x0000891a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000891a-0x00008920: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00008920-0x00009280: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00009280-0x00009be0: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00009be0-0x0000a4aa: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000a4aa-0x0000a4b0: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000a4b0-0x0000ae10: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000ae10-0x0000b340: 1328: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000b340-0x0000bca0: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000bca0-0x0000c56a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000c56a-0x0000c590: 38: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000c590-0x0000ce5a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000ce5a-0x0000d724: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000d724-0x0000dfee: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000dfee-0x0000dff0: 2: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000dff0-0x0000e950: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000e950-0x0000f21a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000f21a-0x0000f220: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000f220-0x0000faea: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000faea-0x0000faf0: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0000faf0-0x00010450: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00010450-0x00010560: 272: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00010560-0x00010e2a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00010e2a-0x00010e30: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00010e30-0x00011790: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00011790-0x0001205a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001205a-0x00012060: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00012060-0x0001292a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001292a-0x00012930: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00012930-0x00013290: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00013290-0x00013b5a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00013b5a-0x00013b60: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00013b60-0x0001442a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001442a-0x00014430: 6: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00014430-0x00014d90: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00014d90-0x000156f0: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x000156f0-0x00015f2a: 2106: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00015f2a-0x000167f4: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x000167f4-0x00016800: 12: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00016800-0x00017160: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00017160-0x00017a2a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00017a2a-0x000182f4: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x000182f4-0x00018300: 12: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00018300-0x00018c60: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00018c60-0x0001952a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001952a-0x00019df4: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00019df4-0x00019e00: 12: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x00019e00-0x0001a760: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001a760-0x0001b02a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001b02a-0x0001b8f4: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001b8f4-0x0001b900: 12: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001b900-0x0001c260: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001c260-0x0001cb2a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001cb2a-0x0001d3f4: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001d3f4-0x0001d400: 12: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001d400-0x0001dd60: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001dd60-0x0001e62a: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001e62a-0x0001eef4: 2250: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001eef4-0x0001ef00: 12: free
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001ef00-0x0001f860: 2400: used
    Nov 01 16:49:32 mainland kernel: [TTM] 0x0001f860-0x00020000: 1952: free
    Nov 01 16:49:32 mainland kernel: [TTM] total: 131072, used 123679 free 7393
    Nov 01 16:49:32 mainland kernel: [drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation -12!
    Any ideas.

    Lone_Wolf wrote:
    please post the entire kernel log from a boot with the problems (you might want to use  a pastebin site since it will likely be big) .
    also post the output of lspci and which driver you are using (radeon or fglrx).
    I am using radeon.
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04)
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
    00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Barts PRO [Radeon HD 6800 Series]
    01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Barts HDMI Audio [Radeon HD 6800 Series]
    03:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
    04:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
    05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
    06:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)
    Is dmesg OK or you want the journald output?
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.4-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012
    [ 0.000000] Command line: root=/dev/sda3 ro rootfstype=ext4 add_efi_memmap quiet initrd=\EFI\arch\initramfs-linux.img
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de73afff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000de73b000-0x00000000dea32fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dea33000-0x00000000dea3efff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dea3f000-0x00000000deac6fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000deac7000-0x00000000dead6fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dead7000-0x00000000debe6fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000debe7000-0x00000000deecefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000deecf000-0x00000000def11fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000def12000-0x00000000df7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000031effffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by American Megatrends
    [ 0.000000] efi: ACPI=0xdea33000 ACPI 2.0=0xdea33000 SMBIOS=0xf0480 MPS=0xfc930
    [ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000008000-0x0000000000011000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000011000-0x0000000000048000) (0MB)
    [ 0.000000] efi: mem03: type=4, attr=0xf, range=[0x0000000000048000-0x0000000000059000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005f000) (0MB)
    [ 0.000000] efi: mem05: type=4, attr=0xf, range=[0x000000000005f000-0x0000000000060000) (0MB)
    [ 0.000000] efi: mem06: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem07: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
    [ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ed0000) (14MB)
    [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000002ed0000-0x0000000008000000) (81MB)
    [ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000008000000-0x00000000083fc000) (3MB)
    [ 0.000000] efi: mem14: type=3, attr=0xf, range=[0x00000000083fc000-0x0000000008400000) (0MB)
    [ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x0000000008400000-0x00000000089c1000) (5MB)
    [ 0.000000] efi: mem16: type=3, attr=0xf, range=[0x00000000089c1000-0x00000000089c3000) (0MB)
    [ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000089c3000-0x00000000089c9000) (0MB)
    [ 0.000000] efi: mem18: type=3, attr=0xf, range=[0x00000000089c9000-0x00000000089cb000) (0MB)
    [ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000089cb000-0x00000000089cc000) (0MB)
    [ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x00000000089cc000-0x00000000089d7000) (0MB)
    [ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000089d7000-0x0000000008dda000) (4MB)
    [ 0.000000] efi: mem22: type=3, attr=0xf, range=[0x0000000008dda000-0x0000000008ddb000) (0MB)
    [ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000008ddb000-0x0000000008ddf000) (0MB)
    [ 0.000000] efi: mem24: type=3, attr=0xf, range=[0x0000000008ddf000-0x0000000008de0000) (0MB)
    [ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000008de0000-0x0000000008de4000) (0MB)
    [ 0.000000] efi: mem26: type=3, attr=0xf, range=[0x0000000008de4000-0x0000000008de5000) (0MB)
    [ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000008de5000-0x0000000008de8000) (0MB)
    [ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x0000000008de8000-0x0000000008de9000) (0MB)
    [ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000008de9000-0x0000000008df0000) (0MB)
    [ 0.000000] efi: mem30: type=3, attr=0xf, range=[0x0000000008df0000-0x0000000008df2000) (0MB)
    [ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000008df2000-0x0000000008df9000) (0MB)
    [ 0.000000] efi: mem32: type=3, attr=0xf, range=[0x0000000008df9000-0x0000000008dfb000) (0MB)
    [ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000008dfb000-0x0000000008dff000) (0MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x0000000008dff000-0x0000000008e01000) (0MB)
    [ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000008e01000-0x0000000008e09000) (0MB)
    [ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x0000000008e09000-0x0000000008e0d000) (0MB)
    [ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000008e0d000-0x0000000008e0f000) (0MB)
    [ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x0000000008e0f000-0x0000000008e11000) (0MB)
    [ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000008e11000-0x0000000008e3e000) (0MB)
    [ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x0000000008e3e000-0x0000000008e3f000) (0MB)
    [ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000008e3f000-0x0000000008e4b000) (0MB)
    [ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x0000000008e4b000-0x0000000008e4e000) (0MB)
    [ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x0000000008e4e000-0x0000000008e67000) (0MB)
    [ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x0000000008e67000-0x0000000008e71000) (0MB)
    [ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x0000000008e71000-0x0000000008e74000) (0MB)
    [ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x0000000008e74000-0x0000000008e77000) (0MB)
    [ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000008e77000-0x0000000008e79000) (0MB)
    [ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x0000000008e79000-0x0000000008e7b000) (0MB)
    [ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000008e7b000-0x0000000008e84000) (0MB)
    [ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x0000000008e84000-0x0000000008e86000) (0MB)
    [ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x0000000008e86000-0x0000000008e89000) (0MB)
    [ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x0000000008e89000-0x0000000008e96000) (0MB)
    [ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x0000000008e96000-0x0000000008e9d000) (0MB)
    [ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x0000000008e9d000-0x0000000008e9e000) (0MB)
    [ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x0000000008e9e000-0x0000000008ea6000) (0MB)
    [ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x0000000008ea6000-0x0000000008ea9000) (0MB)
    [ 0.000000] efi: mem57: type=4, attr=0xf, range=[0x0000000008ea9000-0x0000000008eaa000) (0MB)
    [ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x0000000008eaa000-0x0000000008eae000) (0MB)
    [ 0.000000] efi: mem59: type=4, attr=0xf, range=[0x0000000008eae000-0x0000000008eb5000) (0MB)
    [ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x0000000008eb5000-0x0000000008eb8000) (0MB)
    [ 0.000000] efi: mem61: type=4, attr=0xf, range=[0x0000000008eb8000-0x0000000008ebd000) (0MB)
    [ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x0000000008ebd000-0x0000000008ebf000) (0MB)
    [ 0.000000] efi: mem63: type=4, attr=0xf, range=[0x0000000008ebf000-0x0000000008ec0000) (0MB)
    [ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x0000000008ec0000-0x0000000008ec3000) (0MB)
    [ 0.000000] efi: mem65: type=4, attr=0xf, range=[0x0000000008ec3000-0x0000000008ec8000) (0MB)
    [ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x0000000008ec8000-0x0000000008eca000) (0MB)
    [ 0.000000] efi: mem67: type=4, attr=0xf, range=[0x0000000008eca000-0x0000000008ecc000) (0MB)
    [ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x0000000008ecc000-0x0000000008ece000) (0MB)
    [ 0.000000] efi: mem69: type=4, attr=0xf, range=[0x0000000008ece000-0x0000000008ed2000) (0MB)
    [ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x0000000008ed2000-0x0000000008ed4000) (0MB)
    [ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x0000000008ed4000-0x0000000008ed9000) (0MB)
    [ 0.000000] efi: mem72: type=3, attr=0xf, range=[0x0000000008ed9000-0x0000000008eda000) (0MB)
    [ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x0000000008eda000-0x0000000008f17000) (0MB)
    [ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x0000000008f17000-0x0000000008f19000) (0MB)
    [ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x0000000008f19000-0x0000000008f1b000) (0MB)
    [ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x0000000008f1b000-0x0000000008f26000) (0MB)
    [ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x0000000008f26000-0x0000000008f33000) (0MB)
    [ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x0000000008f33000-0x0000000008f35000) (0MB)
    [ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x0000000008f35000-0x0000000008f36000) (0MB)
    [ 0.000000] efi: mem80: type=3, attr=0xf, range=[0x0000000008f36000-0x0000000008f3b000) (0MB)
    [ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x0000000008f3b000-0x0000000008f4a000) (0MB)
    [ 0.000000] efi: mem82: type=3, attr=0xf, range=[0x0000000008f4a000-0x0000000008f50000) (0MB)
    [ 0.000000] efi: mem83: type=4, attr=0xf, range=[0x0000000008f50000-0x0000000008f53000) (0MB)
    [ 0.000000] efi: mem84: type=3, attr=0xf, range=[0x0000000008f53000-0x0000000008f56000) (0MB)
    [ 0.000000] efi: mem85: type=4, attr=0xf, range=[0x0000000008f56000-0x0000000008f5c000) (0MB)
    [ 0.000000] efi: mem86: type=3, attr=0xf, range=[0x0000000008f5c000-0x0000000008f5d000) (0MB)
    [ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x0000000008f5d000-0x0000000008f5e000) (0MB)
    [ 0.000000] efi: mem88: type=3, attr=0xf, range=[0x0000000008f5e000-0x0000000008f62000) (0MB)
    [ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x0000000008f62000-0x0000000008f7f000) (0MB)
    [ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x0000000008f7f000-0x0000000008f92000) (0MB)
    [ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x0000000008f92000-0x0000000008f9a000) (0MB)
    [ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x0000000008f9a000-0x0000000008f9d000) (0MB)
    [ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x0000000008f9d000-0x0000000008fa5000) (0MB)
    [ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x0000000008fa5000-0x0000000008fa9000) (0MB)
    [ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x0000000008fa9000-0x0000000008fb4000) (0MB)
    [ 0.000000] efi: mem96: type=3, attr=0xf, range=[0x0000000008fb4000-0x0000000008fd7000) (0MB)
    [ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x0000000008fd7000-0x0000000008fd9000) (0MB)
    [ 0.000000] efi: mem98: type=3, attr=0xf, range=[0x0000000008fd9000-0x0000000008fe1000) (0MB)
    [ 0.000000] efi: mem99: type=4, attr=0xf, range=[0x0000000008fe1000-0x0000000008fe3000) (0MB)
    [ 0.000000] efi: mem100: type=3, attr=0xf, range=[0x0000000008fe3000-0x0000000008fe5000) (0MB)
    [ 0.000000] efi: mem101: type=4, attr=0xf, range=[0x0000000008fe5000-0x0000000008fe8000) (0MB)
    [ 0.000000] efi: mem102: type=3, attr=0xf, range=[0x0000000008fe8000-0x0000000008fee000) (0MB)
    [ 0.000000] efi: mem103: type=4, attr=0xf, range=[0x0000000008fee000-0x0000000008ff9000) (0MB)
    [ 0.000000] efi: mem104: type=3, attr=0xf, range=[0x0000000008ff9000-0x0000000008ffd000) (0MB)
    [ 0.000000] efi: mem105: type=4, attr=0xf, range=[0x0000000008ffd000-0x0000000008ffe000) (0MB)
    [ 0.000000] efi: mem106: type=3, attr=0xf, range=[0x0000000008ffe000-0x0000000009000000) (0MB)
    [ 0.000000] efi: mem107: type=4, attr=0xf, range=[0x0000000009000000-0x0000000009005000) (0MB)
    [ 0.000000] efi: mem108: type=3, attr=0xf, range=[0x0000000009005000-0x0000000009007000) (0MB)
    [ 0.000000] efi: mem109: type=4, attr=0xf, range=[0x0000000009007000-0x0000000009008000) (0MB)
    [ 0.000000] efi: mem110: type=3, attr=0xf, range=[0x0000000009008000-0x000000000900b000) (0MB)
    [ 0.000000] efi: mem111: type=4, attr=0xf, range=[0x000000000900b000-0x0000000009010000) (0MB)
    [ 0.000000] efi: mem112: type=3, attr=0xf, range=[0x0000000009010000-0x0000000009014000) (0MB)
    [ 0.000000] efi: mem113: type=4, attr=0xf, range=[0x0000000009014000-0x000000000901a000) (0MB)
    [ 0.000000] efi: mem114: type=3, attr=0xf, range=[0x000000000901a000-0x000000000901d000) (0MB)
    [ 0.000000] efi: mem115: type=4, attr=0xf, range=[0x000000000901d000-0x0000000009027000) (0MB)
    [ 0.000000] efi: mem116: type=3, attr=0xf, range=[0x0000000009027000-0x000000000902e000) (0MB)
    [ 0.000000] efi: mem117: type=4, attr=0xf, range=[0x000000000902e000-0x000000000902f000) (0MB)
    [ 0.000000] efi: mem118: type=3, attr=0xf, range=[0x000000000902f000-0x0000000009036000) (0MB)
    [ 0.000000] efi: mem119: type=4, attr=0xf, range=[0x0000000009036000-0x000000000903b000) (0MB)
    [ 0.000000] efi: mem120: type=3, attr=0xf, range=[0x000000000903b000-0x0000000009040000) (0MB)
    [ 0.000000] efi: mem121: type=4, attr=0xf, range=[0x0000000009040000-0x0000000009046000) (0MB)
    [ 0.000000] efi: mem122: type=3, attr=0xf, range=[0x0000000009046000-0x000000000904c000) (0MB)
    [ 0.000000] efi: mem123: type=4, attr=0xf, range=[0x000000000904c000-0x000000000904e000) (0MB)
    [ 0.000000] efi: mem124: type=3, attr=0xf, range=[0x000000000904e000-0x0000000009050000) (0MB)
    [ 0.000000] efi: mem125: type=4, attr=0xf, range=[0x0000000009050000-0x0000000009055000) (0MB)
    [ 0.000000] efi: mem126: type=3, attr=0xf, range=[0x0000000009055000-0x0000000009057000) (0MB)
    [ 0.000000] efi: mem127: type=4, attr=0xf, range=[0x0000000009057000-0x0000000009059000) (0MB)
    [ 0.000000] efi: mem128: type=3, attr=0xf, range=[0x0000000009059000-0x000000000905f000) (0MB)
    [ 0.000000] efi: mem129: type=4, attr=0xf, range=[0x000000000905f000-0x0000000009070000) (0MB)
    [ 0.000000] efi: mem130: type=3, attr=0xf, range=[0x0000000009070000-0x0000000009091000) (0MB)
    [ 0.000000] efi: mem131: type=4, attr=0xf, range=[0x0000000009091000-0x00000000090a9000) (0MB)
    [ 0.000000] efi: mem132: type=3, attr=0xf, range=[0x00000000090a9000-0x00000000090b3000) (0MB)
    [ 0.000000] efi: mem133: type=4, attr=0xf, range=[0x00000000090b3000-0x00000000090b5000) (0MB)
    [ 0.000000] efi: mem134: type=3, attr=0xf, range=[0x00000000090b5000-0x00000000090ca000) (0MB)
    [ 0.000000] efi: mem135: type=4, attr=0xf, range=[0x00000000090ca000-0x00000000090d0000) (0MB)
    [ 0.000000] efi: mem136: type=3, attr=0xf, range=[0x00000000090d0000-0x0000000009122000) (0MB)
    [ 0.000000] efi: mem137: type=4, attr=0xf, range=[0x0000000009122000-0x0000000009125000) (0MB)
    [ 0.000000] efi: mem138: type=3, attr=0xf, range=[0x0000000009125000-0x000000000913b000) (0MB)
    [ 0.000000] efi: mem139: type=4, attr=0xf, range=[0x000000000913b000-0x000000000913d000) (0MB)
    [ 0.000000] efi: mem140: type=3, attr=0xf, range=[0x000000000913d000-0x000000000916d000) (0MB)
    [ 0.000000] efi: mem141: type=4, attr=0xf, range=[0x000000000916d000-0x0000000009171000) (0MB)
    [ 0.000000] efi: mem142: type=3, attr=0xf, range=[0x0000000009171000-0x0000000009187000) (0MB)
    [ 0.000000] efi: mem143: type=4, attr=0xf, range=[0x0000000009187000-0x0000000009193000) (0MB)
    [ 0.000000] efi: mem144: type=3, attr=0xf, range=[0x0000000009193000-0x0000000009194000) (0MB)
    [ 0.000000] efi: mem145: type=4, attr=0xf, range=[0x0000000009194000-0x0000000009195000) (0MB)
    [ 0.000000] efi: mem146: type=3, attr=0xf, range=[0x0000000009195000-0x0000000009197000) (0MB)
    [ 0.000000] efi: mem147: type=4, attr=0xf, range=[0x0000000009197000-0x0000000009198000) (0MB)
    [ 0.000000] efi: mem148: type=3, attr=0xf, range=[0x0000000009198000-0x00000000091a9000) (0MB)
    [ 0.000000] efi: mem149: type=4, attr=0xf, range=[0x00000000091a9000-0x00000000091ad000) (0MB)
    [ 0.000000] efi: mem150: type=3, attr=0xf, range=[0x00000000091ad000-0x00000000091af000) (0MB)
    [ 0.000000] efi: mem151: type=4, attr=0xf, range=[0x00000000091af000-0x00000000091b4000) (0MB)
    [ 0.000000] efi: mem152: type=3, attr=0xf, range=[0x00000000091b4000-0x00000000091c0000) (0MB)
    [ 0.000000] efi: mem153: type=4, attr=0xf, range=[0x00000000091c0000-0x00000000091c7000) (0MB)
    [ 0.000000] efi: mem154: type=3, attr=0xf, range=[0x00000000091c7000-0x00000000091c9000) (0MB)
    [ 0.000000] efi: mem155: type=4, attr=0xf, range=[0x00000000091c9000-0x00000000091cc000) (0MB)
    [ 0.000000] efi: mem156: type=3, attr=0xf, range=[0x00000000091cc000-0x00000000091ce000) (0MB)
    [ 0.000000] efi: mem157: type=4, attr=0xf, range=[0x00000000091ce000-0x00000000091de000) (0MB)
    [ 0.000000] efi: mem158: type=3, attr=0xf, range=[0x00000000091de000-0x00000000091e0000) (0MB)
    [ 0.000000] efi: mem159: type=4, attr=0xf, range=[0x00000000091e0000-0x000000000920b000) (0MB)
    [ 0.000000] efi: mem160: type=3, attr=0xf, range=[0x000000000920b000-0x0000000009211000) (0MB)
    [ 0.000000] efi: mem161: type=4, attr=0xf, range=[0x0000000009211000-0x0000000009215000) (0MB)
    [ 0.000000] efi: mem162: type=3, attr=0xf, range=[0x0000000009215000-0x0000000009217000) (0MB)
    [ 0.000000] efi: mem163: type=4, attr=0xf, range=[0x0000000009217000-0x000000000921f000) (0MB)
    [ 0.000000] efi: mem164: type=3, attr=0xf, range=[0x000000000921f000-0x0000000009243000) (0MB)
    [ 0.000000] efi: mem165: type=4, attr=0xf, range=[0x0000000009243000-0x0000000009247000) (0MB)
    [ 0.000000] efi: mem166: type=3, attr=0xf, range=[0x0000000009247000-0x0000000009249000) (0MB)
    [ 0.000000] efi: mem167: type=4, attr=0xf, range=[0x0000000009249000-0x0000000012b7b000) (153MB)
    [ 0.000000] efi: mem168: type=3, attr=0xf, range=[0x0000000012b7b000-0x0000000012b7c000) (0MB)
    [ 0.000000] efi: mem169: type=4, attr=0xf, range=[0x0000000012b7c000-0x0000000012b7d000) (0MB)
    [ 0.000000] efi: mem170: type=2, attr=0xf, range=[0x0000000012b7d000-0x0000000012b7e000) (0MB)
    [ 0.000000] efi: mem171: type=4, attr=0xf, range=[0x0000000012b7e000-0x0000000012b80000) (0MB)
    [ 0.000000] efi: mem172: type=3, attr=0xf, range=[0x0000000012b80000-0x0000000012b94000) (0MB)
    [ 0.000000] efi: mem173: type=4, attr=0xf, range=[0x0000000012b94000-0x0000000012b96000) (0MB)
    [ 0.000000] efi: mem174: type=7, attr=0xf, range=[0x0000000012b96000-0x0000000012b99000) (0MB)
    [ 0.000000] efi: mem175: type=4, attr=0xf, range=[0x0000000012b99000-0x0000000012d4c000) (1MB)
    [ 0.000000] efi: mem176: type=7, attr=0xf, range=[0x0000000012d4c000-0x0000000012d4e000) (0MB)
    [ 0.000000] efi: mem177: type=4, attr=0xf, range=[0x0000000012d4e000-0x0000000012db3000) (0MB)
    [ 0.000000] efi: mem178: type=7, attr=0xf, range=[0x0000000012db3000-0x0000000012dba000) (0MB)
    [ 0.000000] efi: mem179: type=4, attr=0xf, range=[0x0000000012dba000-0x0000000012e60000) (0MB)
    [ 0.000000] efi: mem180: type=7, attr=0xf, range=[0x0000000012e60000-0x0000000012e68000) (0MB)
    [ 0.000000] efi: mem181: type=4, attr=0xf, range=[0x0000000012e68000-0x0000000012e93000) (0MB)
    [ 0.000000] efi: mem182: type=7, attr=0xf, range=[0x0000000012e93000-0x0000000012e95000) (0MB)
    [ 0.000000] efi: mem183: type=4, attr=0xf, range=[0x0000000012e95000-0x00000000130a9000) (2MB)
    [ 0.000000] efi: mem184: type=7, attr=0xf, range=[0x00000000130a9000-0x00000000130af000) (0MB)
    [ 0.000000] efi: mem185: type=4, attr=0xf, range=[0x00000000130af000-0x00000000132fe000) (2MB)
    [ 0.000000] efi: mem186: type=7, attr=0xf, range=[0x00000000132fe000-0x0000000013482000) (1MB)
    [ 0.000000] efi: mem187: type=1, attr=0xf, range=[0x0000000013482000-0x00000000137db000) (3MB)
    [ 0.000000] efi: mem188: type=7, attr=0xf, range=[0x00000000137db000-0x000000007fba7000) (1731MB)
    [ 0.000000] efi: mem189: type=2, attr=0xf, range=[0x000000007fba7000-0x0000000080000000) (4MB)
    [ 0.000000] efi: mem190: type=7, attr=0xf, range=[0x0000000080000000-0x00000000de73b000) (1511MB)
    [ 0.000000] efi: mem191: type=0, attr=0xf, range=[0x00000000de73b000-0x00000000dea33000) (2MB)
    [ 0.000000] efi: mem192: type=9, attr=0xf, range=[0x00000000dea33000-0x00000000dea3f000) (0MB)
    [ 0.000000] efi: mem193: type=0, attr=0xf, range=[0x00000000dea3f000-0x00000000dea5c000) (0MB)
    [ 0.000000] efi: mem194: type=0, attr=0xf, range=[0x00000000dea5c000-0x00000000dea61000) (0MB)
    [ 0.000000] efi: mem195: type=0, attr=0xf, range=[0x00000000dea61000-0x00000000deac7000) (0MB)
    [ 0.000000] efi: mem196: type=9, attr=0xf, range=[0x00000000deac7000-0x00000000deacc000) (0MB)
    [ 0.000000] efi: mem197: type=9, attr=0xf, range=[0x00000000deacc000-0x00000000deacd000) (0MB)
    [ 0.000000] efi: mem198: type=9, attr=0xf, range=[0x00000000deacd000-0x00000000dead7000) (0MB)
    [ 0.000000] efi: mem199: type=10, attr=0xf, range=[0x00000000dead7000-0x00000000debe7000) (1MB)
    [ 0.000000] efi: mem200: type=6, attr=0x800000000000000f, range=[0x00000000debe7000-0x00000000ded15000) (1MB)
    [ 0.000000] efi: mem201: type=6, attr=0x800000000000000f, range=[0x00000000ded15000-0x00000000dedd2000) (0MB)
    [ 0.000000] efi: mem202: type=6, attr=0x800000000000000f, range=[0x00000000dedd2000-0x00000000dedd3000) (0MB)
    [ 0.000000] efi: mem203: type=6, attr=0x800000000000000f, range=[0x00000000dedd3000-0x00000000dee4b000) (0MB)
    [ 0.000000] efi: mem204: type=5, attr=0x800000000000000f, range=[0x00000000dee4b000-0x00000000dee7c000) (0MB)
    [ 0.000000] efi: mem205: type=5, attr=0x800000000000000f, range=[0x00000000dee7c000-0x00000000deecf000) (0MB)
    [ 0.000000] efi: mem206: type=10, attr=0xf, range=[0x00000000deecf000-0x00000000def12000) (0MB)
    [ 0.000000] efi: mem207: type=4, attr=0xf, range=[0x00000000def12000-0x00000000df559000) (6MB)
    [ 0.000000] efi: mem208: type=3, attr=0xf, range=[0x00000000df559000-0x00000000df7e7000) (2MB)
    [ 0.000000] efi: mem209: type=4, attr=0xf, range=[0x00000000df7e7000-0x00000000df7ea000) (0MB)
    [ 0.000000] efi: mem210: type=3, attr=0xf, range=[0x00000000df7ea000-0x00000000df7ec000) (0MB)
    [ 0.000000] efi: mem211: type=4, attr=0xf, range=[0x00000000df7ec000-0x00000000df800000) (0MB)
    [ 0.000000] efi: mem212: type=7, attr=0xf, range=[0x0000000100000000-0x000000031f000000) (8688MB)
    [ 0.000000] efi: mem213: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
    [ 0.000000] efi: mem214: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem215: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
    [ 0.000000] efi: mem216: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem217: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem218: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
    [ 0.000000] DMI 2.7 present.
    [ 0.000000] DMI: /DZ77BH-55K, BIOS BHZ7710H.86A.0057.2012.0208.1904 02/08/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x31f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D3FFF write-protect
    [ 0.000000] D4000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask F00000000 write-back
    [ 0.000000] 2 base 300000000 mask FF0000000 write-back
    [ 0.000000] 3 base 310000000 mask FF8000000 write-back
    [ 0.000000] 4 base 318000000 mask FFC000000 write-back
    [ 0.000000] 5 base 31C000000 mask FFE000000 write-back
    [ 0.000000] 6 base 31E000000 mask FFF000000 write-back
    [ 0.000000] 7 base 0E0000000 mask FE0000000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fcd00-0x000fcd0f] mapped at [ffff8800000fcd00]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]
    [ 0.000000] [mem 0x00000000-0xdf7fffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1f8ff000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x31effffff]
    [ 0.000000] [mem 0x100000000-0x31effffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x31effffff @ [mem 0xde72d000-0xde73afff]
    [ 0.000000] RAMDISK: [mem 0x7fba7000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000dea33000 00024 (v02 INTEL)
    [ 0.000000] ACPI: XSDT 00000000dea33070 00064 (v01 INTEL DZ77BH 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000dea3cd30 000F4 (v04 INTEL DZ77BH 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000dea33168 09BC2 (v02 INTEL DZ77BH 00000057 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000debe5f80 00040
    [ 0.000000] ACPI: APIC 00000000dea3ce28 00092 (v03 INTEL DZ77BH 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000dea3cec0 0003C (v01 INTEL DZ77BH 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000dea3cf00 00038 (v01 INTEL DZ77BH 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000dea3cf38 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000dea3d2a8 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000dea3dc58 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: DMAR 00000000dea3e6f0 00080 (v01 INTEL SNB 00000001 INTL 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000031effffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x31effffff]
    [ 0.000000] NODE_DATA [mem 0x31effc000-0x31effffff]
    [ 0.000000] [ffffea0000000000-ffffea000c7fffff] PMD -> [ffff880312600000-ffff88031e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x31effffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xde73afff]
    [ 0.000000] node 0: [mem 0xdef12000-0xdf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x31effffff]
    [ 0.000000] On node 0 totalpages: 3137464
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 27 pages reserved
    [ 0.000000] DMA zone: 3892 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 16320 pages used for memmap
    [ 0.000000] DMA32 zone: 893033 pages, LIFO batch:31
    [ 0.000000] Normal zone: 34752 pages used for memmap
    [ 0.000000] Normal zone: 2189376 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000de73b000 - 00000000dea33000
    [ 0.000000] PM: Registered nosave memory: 00000000dea33000 - 00000000dea3f000
    [ 0.000000] PM: Registered nosave memory: 00000000dea3f000 - 00000000deac7000
    [ 0.000000] PM: Registered nosave memory: 00000000deac7000 - 00000000dead7000
    [ 0.000000] PM: Registered nosave memory: 00000000dead7000 - 00000000debe7000
    [ 0.000000] PM: Registered nosave memory: 00000000debe7000 - 00000000deecf000
    [ 0.000000] PM: Registered nosave memory: 00000000deecf000 - 00000000def12000
    [ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    [ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
    [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
    [ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88031ec00000 s84608 r8192 d21888 u262144
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3086301
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: root=/dev/sda3 ro rootfstype=ext4 add_efi_memmap quiet initrd=\EFI\arch\initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 12078164k/13090816k available (4726k kernel code, 540960k absent, 471692k reserved, 4143k data, 768k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 50331648 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 3392.183 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6787.04 BogoMIPS (lpj=11307276)
    [ 0.000003] pid_max: default: 32768 minimum: 301
    [ 0.009763] Security Framework initialized
    [ 0.009766] AppArmor: AppArmor disabled by boot time parameter
    [ 0.010390] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.013203] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.014466] Mount-cache hash table entries: 256
    [ 0.014589] Initializing cgroup subsys cpuacct
    [ 0.014590] Initializing cgroup subsys memory
    [ 0.014595] Initializing cgroup subsys devices
    [ 0.014596] Initializing cgroup subsys freezer
    [ 0.014597] Initializing cgroup subsys net_cls
    [ 0.014598] Initializing cgroup subsys blkio
    [ 0.014616] CPU: Physical Processor ID: 0
    [ 0.014616] CPU: Processor Core ID: 0
    [ 0.014620] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.014881] mce: CPU supports 9 MCE banks
    [ 0.014891] CPU0: Thermal monitoring enabled (TM1)
    [ 0.014897] process: using mwait in idle threads
    [ 0.014900] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift is 0x1
    [ 0.015624] ACPI: Core revision 20120711
    [ 0.019068] ftrace: allocating 18347 entries in 72 pages
    [ 0.025291] dmar: Host address width 36
    [ 0.025292] dmar: DRHD base: 0x000000fed90000 flags: 0x1
    [ 0.025297] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
    [ 0.025298] dmar: RMRR base: 0x000000dea3f000 end: 0x000000dea5afff
    [ 0.025367] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
    [ 0.025368] HPET id 0 under DRHD base 0xfed90000
    [ 0.025425] Enabled IRQ remapping in x2apic mode
    [ 0.025426] Enabling x2apic
    [ 0.025426] Enabled x2apic
    [ 0.025430] Switched APIC routing to cluster x2apic.
    [ 0.025840] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.058747] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz stepping 09
    [ 0.163213] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
    [ 0.163217] ... version: 3
    [ 0.163218] ... bit width: 48
    [ 0.163219] ... generic registers: 4
    [ 0.163219] ... value mask: 0000ffffffffffff
    [ 0.163220] ... max period: 000000007fffffff
    [ 0.163220] ... fixed-purpose events: 3
    [ 0.163221] ... event mask: 000000070000000f
    [ 0.189880] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.203109] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
    [ 0.376086] Brought up 8 CPUs
    [ 0.376089] smpboot: Total of 8 processors activated (54296.38 BogoMIPS)
    [ 0.382556] devtmpfs: initialized
    [ 0.383577] PM: Registering ACPI NVS region [mem 0xdead7000-0xdebe6fff] (1114112 bytes)
    [ 0.383587] PM: Registering ACPI NVS region [mem 0xdeecf000-0xdef11fff] (274432 bytes)
    [ 0.384246] NET: Registered protocol family 16
    [ 0.384331] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.384333] ACPI: bus type pci registered
    [ 0.384373] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.384374] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.388307] PCI: Using configuration type 1 for base access
    [ 0.388706] bio: create slab <bio-0> at 0
    [ 0.388738] ACPI: Added _OSI(Module Device)
    [ 0.388739] ACPI: Added _OSI(Processor Device)
    [ 0.388740] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.388740] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.389651] ACPI: EC: Look up EC in DSDT
    [ 0.390665] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.392478] ACPI: SSDT 00000000dea67018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.392707] ACPI: Dynamic OEM Table Load:
    [ 0.392708] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.392884] ACPI: SSDT 00000000dea68a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.393126] ACPI: Dynamic OEM Table Load:
    [ 0.393128] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.393224] ACPI: SSDT 00000000dea6dc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.393447] ACPI: Dynamic OEM Table Load:
    [ 0.393449] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.394177] ACPI: Interpreter enabled
    [ 0.394180] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.394193] ACPI: Using IOAPIC for interrupt routing
    [ 0.397706] ACPI: Power Resource [FN00] (off)
    [ 0.397749] ACPI: Power Resource [FN01] (off)
    [ 0.397791] ACPI: Power Resource [FN02] (off)
    [ 0.397832] ACPI: Power Resource [FN03] (off)
    [ 0.397874] ACPI: Power Resource [FN04] (off)
    [ 0.398137] ACPI: No dock devices found.
    [ 0.398139] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.398334] \_SB_.PCI0:_OSC invalid UUID
    [ 0.398335] _OSC request data:1 8 1f
    [ 0.398337] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.398659] PCI host bridge to bus 0000:00
    [ 0.398661] pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
    [ 0.398663] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.398664] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.398665] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.398666] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.398667] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.398668] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.398669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.398670] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
    [ 0.398671] pci_bus 0000:00: root bus resource [mem 0x31f000000-0xfffffffff]
    [ 0.398677] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
    [ 0.398704] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
    [ 0.398725] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.398761] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.398782] pci 0000:00:14.0: reg 10: [mem 0xf7f20000-0xf7f2ffff 64bit]
    [ 0.398849] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.398869] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.398890] pci 0000:00:16.0: reg 10: [mem 0xf7f3b000-0xf7f3b00f 64bit]
    [ 0.398960] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.398988] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
    [ 0.399004] pci 0000:00:19.0: reg 10: [mem 0xf7f00000-0xf7f1ffff]
    [ 0.399011] pci 0000:00:19.0: reg 14: [mem 0xf7f39000-0xf7f39fff]
    [ 0.399019] pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
    [ 0.399077] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.399100] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.399119] pci 0000:00:1a.0: reg 10: [mem 0xf7f38000-0xf7f383ff]
    [ 0.399208] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.399230] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.399244] pci 0000:00:1b.0: reg 10: [mem 0xf7f30000-0xf7f33fff 64bit]
    [ 0.399307] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.399327] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.399400] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.399423] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
    [ 0.399497] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.399522] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
    [ 0.399601] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.399628] pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
    [ 0.399707] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
    [ 0.399733] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.399752] pci 0000:00:1d.0: reg 10: [mem 0xf7f37000-0xf7f373ff]
    [ 0.399837] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.399860] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
    [ 0.399976] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
    [ 0.399992] pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
    [ 0.399999] pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
    [ 0.400006] pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
    [ 0.400014] pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
    [ 0.400021] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
    [ 0.400028] pci 0000:00:1f.2: reg 24: [mem 0xf7f36000-0xf7f367ff]
    [ 0.400070] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.400085] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.400099] pci 0000:00:1f.3: reg 10: [mem 0xf7f35000-0xf7f350ff 64bit]
    [ 0.400118] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
    [ 0.400155] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-3e]
    [ 0.400166] pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
    [ 0.400177] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.400186] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit]
    [ 0.400192] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
    [ 0.400203] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref]
    [ 0.400231] pci 0000:01:00.0: supports D1 D2
    [ 0.400249] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
    [ 0.400260] pci 0000:01:00.1: reg 10: [mem 0xf7e40000-0xf7e43fff 64bit]
    [ 0.400312] pci 0000:01:00.1: supports D1 D2
    [ 0.405867] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.405871] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.405874] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
    [ 0.405879] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.405933] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-3e]
    [ 0.405936] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.405984] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-3e]
    [ 0.406040] pci 0000:03:00.0: [1283:8892] type 01 class 0x060401
    [ 0.406422] pci 0000:03:00.0: supports D1 D2
    [ 0.406423] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.406485] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
    [ 0.406490] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 0.406579] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 03-04]
    [ 0.406611] pci 0000:04:02.0: [104c:8023] type 00 class 0x0c0010
    [ 0.406656] pci 0000:04:02.0: reg 10: [mem 0xf7d04000-0xf7d047ff]
    [ 0.406679] pci 0000:04:02.0: reg 14: [mem 0xf7d00000-0xf7d03fff]
    [ 0.406868] pci 0000:04:02.0: supports D1 D2
    [ 0.406869] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot
    [ 0.406985] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
    [ 0.407005] pci 0000:03:00.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 0.407019] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
    [ 0.407020] pci 0000:03:00.0: bridge window [mem 0xf7d00000-0xf7dfffff] (subtractive decode)
    [ 0.407021] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
    [ 0.407022] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
    [ 0.407076] pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-3e]
    [ 0.407132] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.407182] pci 0000:05:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 0.407358] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.412531] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.412539] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.412595] pci_bus 0000:06: busn_res: [bus 06] is inserted under [bus 00-3e]
    [ 0.412621] pci 0000:06:00.0: [1b4b:9172] type 00 class 0x010601
    [ 0.412639] pci 0000:06:00.0: reg 10: [io 0xd040-0xd047]
    [ 0.412653] pci 0000:06:00.0: reg 14: [io 0xd030-0xd033]
    [ 0.412666] pci 0000:06:00.0: reg 18: [io 0xd020-0xd027]
    [ 0.412680] pci 0000:06:00.0: reg 1c: [io 0xd010-0xd013]
    [ 0.412693] pci 0000:06:00.0: reg 20: [io 0xd000-0xd00f]
    [ 0.412707] pci 0000:06:00.0: reg 24: [mem 0xf7b20000-0xf7b201ff]
    [ 0.412721] pci 0000:06:00.0: reg 30: [mem 0xf7b00000-0xf7b1ffff pref]
    [ 0.412786] pci 0000:06:00.0: PME# supported from D3hot
    [ 0.419165] pci 0000:00:1c.7: PCI bridge to [bus 06]
    [ 0.419170] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
    [ 0.419175] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
    [ 0.419216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.419284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.419302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [ 0.419321] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03.ITEE._PRT]
    [ 0.419348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.419367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
    [ 0.419384] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
    [ 0.419441] \_SB_.PCI0:_OSC invalid UUID
    [ 0.419442] _OSC request data:1 1f 1f
    [ 0.419444] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.419445] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.421948] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.421978] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.422006] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.422032] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.422058] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.422084] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.422110] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.422136] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.422188] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.422190] vgaarb: loaded
    [ 0.422190] vgaarb: bridge control possible 0000:01:00.0
    [ 0.422209] PCI: Using ACPI for IRQ routing
    [ 0.423568] PCI: pci_cache_line_size set to 64 bytes
    [ 0.423644] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
    [ 0.423645] e820: reserve RAM buffer [mem 0xde73b000-0xdfffffff]
    [ 0.423646] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
    [ 0.423647] e820: reserve RAM buffer [mem 0x31f000000-0x31fffffff]
    [ 0.423701] NetLabel: Initializing
    [ 0.423702] NetLabel: domain hash size = 128
    [ 0.423703] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.423710] NetLabel: unlabeled traffic allowed by default
    [ 0.423723] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.423726] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.425731] Switching to clocksource hpet
    [ 0.428846] pnp: PnP ACPI init
    [ 0.428852] ACPI: bus type pnp registered
    [ 0.429022] pnp 00:00: [bus 00-3e]
    [ 0.429024] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.429025] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.429026] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.429028] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.429029] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.429029] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.429030] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.429031] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.429032] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.429033] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.429034] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.429035] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.429036] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.429037] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.429038] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.429039] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.429040] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.429041] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
    [ 0.429042] pnp 00:00: [mem 0x31f000000-0xfffffffff window]
    [ 0.429071] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.429083] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.429109] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.429111] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.429118] pnp 00:02: [io 0x0000-0x001f]
    [ 0.429118] pnp 00:02: [io 0x0081-0x0091]
    [ 0.429119] pnp 00:02: [io 0x0093-0x009f]
    [ 0.429120] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.429121] pnp 00:02: [dma 4]
    [ 0.429132] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.429136] pnp 00:03: [mem 0xff000000-0xffffffff]
    [ 0.429146] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.429189] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.429201] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.429207] pnp 00:05: [io 0x002e-0x002f]
    [ 0.429208] pnp 00:05: [io 0x004e-0x004f]
    [ 0.429209] pnp 00:05: [io 0x0061]
    [ 0.429210] pnp 00:05: [io 0x0063]
    [ 0.429211] pnp 00:05: [io 0x0065]
    [ 0.429211] pnp 00:05: [io 0x0067]
    [ 0.429212] pnp 00:05: [io 0x0070]
    [ 0.429213] pnp 00:05: [io 0x0080]
    [ 0.429214] pnp 00:05: [io 0x0092]
    [ 0.429215] pnp 00:05: [io 0x00b2-0x00b3]
    [ 0.429216] pnp 00:05: [io 0x0680-0x069f]
    [ 0.429217] pnp 00:05: [io 0x0200-0x020f]
    [ 0.429217] pnp 00:05: [io 0xffff]
    [ 0.429218] pnp 00:05: [io 0xffff]
    [ 0.429219] pnp 00:05: [io 0x0400-0x0453]
    [ 0.429220] pnp 00:05: [io 0x0458-0x047f]
    [ 0.429221] pnp 00:05: [io 0x0500-0x057f]
    [ 0.429222] pnp 00:05: [io 0x164e-0x164f]
    [ 0.429243] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.429244] system 00:05: [io 0x0200-0x020f] has been reserved
    [ 0.429246] system 00:05: [io 0xffff] has been reserved
    [ 0.429247] system 00:05: [io 0xffff] has been reserved
    [ 0.429248] system 00:05: [io 0x0400-0x0453] has been reserved
    [ 0.429249] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.429250] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.429251] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.429253] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.429257] pnp 00:06: [io 0x0070-0x0077]
    [ 0.429264] pnp 00:06: [irq 8]
    [ 0.429276] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.429291] pnp 00:07: [io 0x0454-0x0457]
    [ 0.429309] system 00:07: [io 0x0454-0x0457] has been reserved
    [ 0.429311] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.429339] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.429340] pnp 00:08: [io 0x0a00-0x0a0f]
    [ 0.429341] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.429359] system 00:08: [io 0x0a00-0x0a0f] has been reserved
    [ 0.429360] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.429571] pnp 00:09: [io 0x03f8-0x03ff]
    [ 0.429576] pnp 00:09: [irq 4]
    [ 0.429577] pnp 00:09: [dma 0 disabled]
    [ 0.429608] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.429657] pnp 00:0a: [io 0x0010-0x001f]
    [ 0.429658] pnp 00:0a: [io 0x0022-0x003f]
    [ 0.429659] pnp 00:0a: [io 0x0044-0x005f]
    [ 0.429660] pnp 00:0a: [io 0x0062-0x0063]
    [ 0.429661] pnp 00:0a: [io 0x0065-0x006f]
    [ 0.429661] pnp 00:0a: [io 0x0072-0x007f]
    [ 0.429662] pnp 00:0a: [io 0x0080]
    [ 0.429663] pnp 00:0a: [io 0x0084-0x0086]
    [ 0.429664] pnp 00:0a: [io 0x0088]
    [ 0.429665] pnp 00:0a: [io 0x008c-0x008e]
    [ 0.429666] pnp 00:0a: [io 0x0090-0x009f]
    [ 0.429666] pnp 00:0a: [io 0x00a2-0x00bf]
    [ 0.429667] pnp 00:0a: [io 0x00e0-0x00ef]
    [ 0.429668] pnp 00:0a: [io 0x04d0-0x04d1]
    [ 0.429690] system 00:0a: [io 0x04d0-0x04d1] has been reserved
    [ 0.429691] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.429695] pnp 00:0b: [io 0x00f0-0x00ff]
    [ 0.429700] pnp 00:0b: [irq 13]
    [ 0.429713] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.429827] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
    [ 0.429828] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
    [ 0.429829] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
    [ 0.429830] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
    [ 0.429831] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
    [ 0.429831] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
    [ 0.429832] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
    [ 0.429833] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
    [ 0.429834] pnp 00:0c: [mem 0xff000000-0xffffffff]
    [ 0.429835] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
    [ 0.429836] pnp 00:0c: [mem 0xf0000000-0xf0000fff]
    [ 0.429867] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.429869] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.429870] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.429871] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.429872] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.429873] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.429874] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.429876] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.429877] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.429878] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.429879] system 00:0c: [mem 0xf0000000-0xf0000fff] has been reserved
    [ 0.429881] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.429953] pnp: PnP ACPI: found 13 devices
    [ 0.429954] ACPI: ACPI bus type pnp unregistered
    [ 0.435749] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.435751] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.435752] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.435794] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.435795] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.435796] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.435799] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0100000-0xf02fffff]
    [ 0.435801] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0300000-0xf04fffff 64bit pref]
    [ 0.435802] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.435804] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.435805] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.435807] pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
    [ 0.435809] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.435811] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.435814] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.435818] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf02fffff]
    [ 0.435822] pci 0000:00:1c.0: bridge window [mem 0xf0300000-0xf04fffff 64bit pref]
    [ 0.435828] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.435838] pci 0000:03:00.0: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 0.435857] pci 0000:00:1c.2: PCI bridge to [bus 03-04]
    [ 0.435862] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
    [ 0.435869] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.435874] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.435881] pci 0000:00:1c.7: PCI bridge to [bus 06]
    [ 0.435884] pci 0000:00:1c.7: bridge window [io 0xd000-0xdfff]
    [ 0.435888] pci 0000:00:1c.7: bridge window [mem 0xf7b00000-0xf7bfffff]
    [ 0.435926] pci 0000:03:00.0: setting latency timer to 64
    [ 0.435940] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.435941] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.435942] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.435943] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.435944] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
    [ 0.435945] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
    [ 0.435946] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfeafffff]
    [ 0.435947] pci_bus 0000:00: resource 11 [mem 0x31f000000-0xfffffffff]
    [ 0.435949] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.435950] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
    [ 0.435951] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.435952] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.435953] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf02fffff]
    [ 0.435954] pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf04fffff 64bit pref]
    [ 0.435955] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 0.435956] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
    [ 0.435957] pci_bus 0000:04: resource 5 [mem 0xf7d00000-0xf7dfffff]
    [ 0.435958] pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 0.435959] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.435960] pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff]
    [ 0.435976] NET: Registered protocol family 2
    [ 0.436320] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.437211] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.437322] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.437331] TCP: reno registered
    [ 0.437344] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.437382] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.437459] NET: Registered protocol family 1
    [ 0.472336] pci 0000:01:00.0: Boot video device
    [ 0.482023] PCI: CLS 64 bytes, default 64
    [ 0.482054] Unpacking initramfs...
    [ 0.536299] Freeing initrd memory: 4452k freed
    [ 0.536637] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.536639] software IO TLB [mem 0xda72d000-0xde72cfff] (64MB) mapped at [ffff8800da72d000-ffff8800de72cfff]
    [ 0.536945] audit: initializing netlink socket (disabled)
    [ 0.536955] type=2000 audit(1351839266.433:1): initialized
    [ 0.544744] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.546095] VFS: Disk quotas dquot_6.5.2
    [ 0.546127] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.546208] msgmni has been set to 23974
    [ 0.546329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.546352] io scheduler noop registered
    [ 0.546353] io scheduler deadline registered
    [ 0.546380] io scheduler cfq registered (default)
    [ 0.546450] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
    [ 0.546692] efifb: probing for efifb
    [ 0.546971] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000b300000, using 3752k, total 16384k
    [ 0.546971] efifb: mode is 800x600x32, linelength=3200, pages=1
    [ 0.546972] efifb: scrolling: redraw
    [ 0.546973] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.548273] Console: switching to colour frame buffer device 100x37
    [ 0.549517] fb0: EFI VGA frame buffer device
    [ 0.549520] intel_idle: MWAIT substates: 0x1120
    [ 0.549521] intel_idle: v0.4 model 0x3A
    [ 0.549522] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.549552] GHES: HEST is not enabled!
    [ 0.549586] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.549921] Linux agpgart interface v0.103
    [ 0.549969] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.553031] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.553049] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.553102] mousedev: PS/2 mouse device common for all mice
    [ 0.553145] rtc_cmos 00:06: RTC can wake from S4
    [ 0.553260] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 0.553286] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.553362] cpuidle: using governor ladder
    [ 0.553468] cpuidle: using governor menu
    [ 0.553533] drop_monitor: Initializing network drop monitor service
    [ 0.553577] TCP: cubic registered
    [ 0.553635] NET: Registered protocol family 10
    [ 0.553723] NET: Registered protocol family 17
    [ 0.553729] Key type dns_resolver registered
    [ 0.553908] PM: Hibernation image not present or could not be loaded.
    [ 0.553913] registered taskstats version 1
    [ 0.554567] rtc_cmos 00:06: setting system clock to 2012-11-02 06:54:26 UTC (1351839266)
    [ 0.555363] Freeing unused kernel memory: 768k freed
    [ 0.555445] Write protecting the kernel read-only data: 8192k
    [ 0.557779] Freeing unused kernel memory: 1408k freed
    [ 0.558859] Freeing unused kernel memory: 568k freed
    [ 0.563885] systemd-udevd[76]: starting version 195
    [ 0.565470] [drm] Initialized drm 1.1.0 20060810
    [ 0.567991] [drm] radeon defaulting to kernel modesetting.
    [ 0.567992] [drm] radeon kernel modesetting enabled.
    [ 0.568011] checking generic (e0000000 3aa000) vs hw (e0000000 10000000)
    [ 0.568012] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
    [ 0.568021] Console: switching to colour dummy device 80x25
    [ 0.568239] [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x174B:0x174B).
    [ 0.568289] [drm] register mmio base: 0xF7E20000
    [ 0.568289] [drm] register mmio size: 131072
    [ 0

  • How do I/Do I need to fix "ata#.00 status { DRDY }" error?

    I've got an old server that used to be running windows that I have received to set up with linux for myself.  As I was working with it, I remembered that I had an old computer that I was just going to trash/give away anyways, of which many components would be better.  I have since set up a computer that's a mash of components between the two and everything seems to run perfectly except for one problem: I keep getting this error: (Where "#" is either 2, 3, or 4)
    ata#.00: exception Emask 0x50 SAct 0x0 SErr 0x48900 action 0x6 frozen
    ata#: SError: {UnrecovData HostInt 10B8B Handshk }
    ata#.00: failed command WRITE DMA
    ata#.00: cmd ca/00:88:9f:ca:8d/00:00:00:00:00/e8 tag 0 dma 69632 out
    res 50/00:88:9f:ca:8d/00:00:9e:c9:8d/e8 Emask 0x50 (AtA bus error)
    ata#.00: status: { DRDY }
    This error occurred once for each of the three numbers (which also happens to correspond to the three sata ports my HDs are plugged into): 2 and 3 while I was using dd to zero them (I zeroed all three but 4 didn't give any errors), and 4 just after installing grub onto a mirror raid composing of HDs 2 and 3. 
    All of the HDs originally used IDE so I used a converted to switch them (Model number CB-IS100)
    Additionally, when deconstructing the computers, one of the sata cables tore the first female connector out of the motherboard (hence why they start at 2), but while I know that's not preferable, I don't think it would cause this error.
    Finally, this motherboard was in a computer that had, as far as I could tell, a poor power supply that cause it to reboot when using a lot of CPU power.
    My question is really this: Will this cause any major problems or can I ignore it?  Also, is there anything I can do to fix it?
    This is my dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-i686-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Oct 19 00:29:46 CEST 2013
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000987ff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000098800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfedf7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cfedf800-0x00000000cfedffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: HP Pavilion 061 ER879AA-ABA M7457C/EMERY, BIOS 3.15 06/23/2006
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0xcfedf max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0CFF00000 mask FFFF00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f5f80-0x000f5f8f] mapped at [c00f5f80]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
    [ 0.000000] Base memory trampoline at [c0094000] 94000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x00877000, 0x00877fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7ef2f000-0x7fffffff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x3672d000-0x377fddaf]
    [ 0.000000] Move RAMDISK from [mem 0x7ef2f000-0x7ffffdaf] to [mem 0x3672d000-0x377fddaf]
    [ 0.000000] ACPI: RSDP 000f82e0 00014 (v00 HP-CPC)
    [ 0.000000] ACPI: RSDT cfee3040 00030 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP cfee30c0 00074 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT cfee3180 0505D (v01 HP-CPC AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS cfee0000 00040
    [ 0.000000] ACPI: MCFG cfee8340 0003C (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC cfee8240 00084 (v01 HP-CPC AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 2438MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x00878000, 0x00878fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0xcfedefff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00097fff]
    [ 0.000000] node 0: [mem 0x00100000-0xcfedefff]
    [ 0.000000] On node 0 totalpages: 851574
    [ 0.000000] free_area_init_node: node 0, pgdat c06d7740, node_mem_map f4d2d020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3991 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 4878 pages used for memmap
    [ 0.000000] HighMem zone: 624353 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x00098000-0x00098fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00099000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
    [ 0.000000] e820: [mem 0xcff00000-0xefffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f4ce3000 s33536 r0 d23808 u57344
    [ 0.000000] pcpu-alloc: s33536 r0 d23808 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 849798
    [ 0.000000] Kernel command line: BOOT_IMAGE=boot/i686/vmlinuz archisobasedir=arch archisolabel=ARCH_201311 initrd=boot/i686/archiso.img
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 6813424 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000cfedf)
    [ 0.000000] Memory: 3346976K/3406296K available (4262K kernel code, 426K rwdata, 1356K rodata, 608K init, 948K bss, 59320K reserved, 2497412K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc06e9000 - 0xc0781000 ( 608 kB)
    .data : 0xc0529d5e - 0xc06e8a00 (1787 kB)
    .text : 0xc0100000 - 0xc0529d5e (4263 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f4008000 soft=f400a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3000.893 MHz processor
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6004.86 BogoMIPS (lpj=10002976)
    [ 0.003342] pid_max: default: 32768 minimum: 301
    [ 0.003402] Security Framework initialized
    [ 0.003416] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003418] Yama: becoming mindful.
    [ 0.003442] Mount-cache hash table entries: 512
    [ 0.003753] Initializing cgroup subsys memory
    [ 0.003767] Initializing cgroup subsys devices
    [ 0.003771] Initializing cgroup subsys freezer
    [ 0.003774] Initializing cgroup subsys net_cls
    [ 0.006675] Initializing cgroup subsys blkio
    [ 0.006723] CPU: Physical Processor ID: 0
    [ 0.006727] CPU: Processor Core ID: 0
    [ 0.006731] mce: CPU supports 4 MCE banks
    [ 0.006745] CPU0: Thermal monitoring enabled (TM1)
    [ 0.006763] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
    tlb_flushall_shift: 6
    [ 0.006919] Freeing SMP alternatives memory: 20K (c0781000 - c0786000)
    [ 0.008197] ACPI: Core revision 20130517
    [ 0.012076] ACPI: All ACPI Tables successfully acquired
    [ 0.013370] ftrace: allocating 19099 entries in 38 pages
    [ 0.023450] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.057502] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz (fam: 0f, model: 06, stepping: 02)
    [ 0.059999] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
    [ 0.059999] ... version: 0
    [ 0.059999] ... bit width: 40
    [ 0.059999] ... generic registers: 18
    [ 0.059999] ... value mask: 000000ffffffffff
    [ 0.059999] ... max period: 0000007fffffffff
    [ 0.059999] ... fixed-purpose events: 0
    [ 0.059999] ... event mask: 000000000003ffff
    [ 0.076727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083427] CPU 1 irqstacks, hard=f40ce000 soft=f40d8000
    [ 0.006666] Initializing CPU#1
    [ 0.083431] smpboot: Booting Node 0, Processors #1
    [ 0.096604] Brought up 2 CPUs
    [ 0.096610] smpboot: Total of 2 processors activated (12008.72 BogoMIPS)
    [ 0.096819] devtmpfs: initialized
    [ 0.096976] PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
    [ 0.100507] RTC time: 20:09:02, date: 05/19/14
    [ 0.100577] NET: Registered protocol family 16
    [ 0.100840] ACPI: bus type PCI registered
    [ 0.100846] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.100944] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
    [ 0.100950] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
    [ 0.100954] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
    [ 0.100956] PCI: Using MMCONFIG for extended config space
    [ 0.100959] PCI: Using configuration type 1 for base access
    [ 0.102090] bio: create slab <bio-0> at 0
    [ 0.102090] ACPI: Added _OSI(Module Device)
    [ 0.102090] ACPI: Added _OSI(Processor Device)
    [ 0.102090] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.102090] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.103853] ACPI: EC: Look up EC in DSDT
    [ 0.110158] ACPI: Interpreter enabled
    [ 0.110189] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
    [ 0.110213] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.110217] ACPI: Using IOAPIC for interrupt routing
    [ 0.110269] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.110379] ACPI: No dock devices found.
    [ 0.118318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.118328] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.118332] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.118461] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.118466] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.118470] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.118474] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [ 0.118478] acpi PNP0A08:00: host bridge window [mem 0xcff00000-0xfebfffff] (ignored)
    [ 0.118481] PCI: root bus 00: using default resources
    [ 0.118486] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.118696] PCI host bridge to bus 0000:00
    [ 0.118703] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.118707] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.118710] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    [ 0.118725] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
    [ 0.118895] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
    [ 0.118957] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.119125] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    [ 0.119148] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
    [ 0.119231] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.119317] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.119384] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    [ 0.119433] pci 0000:00:1d.0: reg 0x20: [io 0xff00-0xff1f]
    [ 0.119532] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.119597] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    [ 0.119646] pci 0000:00:1d.1: reg 0x20: [io 0xfe00-0xfe1f]
    [ 0.119745] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.119808] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    [ 0.119857] pci 0000:00:1d.2: reg 0x20: [io 0xfd00-0xfd1f]
    [ 0.119955] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.120030] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    [ 0.120079] pci 0000:00:1d.3: reg 0x20: [io 0xfc00-0xfc1f]
    [ 0.120178] pci 0000:00:1d.3: System wakeup disabled by ACPI
    [ 0.120251] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    [ 0.120273] pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
    [ 0.120360] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.120440] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.120507] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.120640] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.120712] pci 0000:00:1f.0: [8086:27b0] type 00 class 0x060100
    [ 0.120948] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
    [ 0.120966] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
    [ 0.120978] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
    [ 0.120990] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
    [ 0.121002] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
    [ 0.121014] pci 0000:00:1f.1: reg 0x20: [io 0xfb00-0xfb0f]
    [ 0.121164] pci 0000:00:1f.2: [8086:27c3] type 00 class 0x010400
    [ 0.121185] pci 0000:00:1f.2: reg 0x10: [io 0xfa00-0xfa07]
    [ 0.121196] pci 0000:00:1f.2: reg 0x14: [io 0xf900-0xf903]
    [ 0.121206] pci 0000:00:1f.2: reg 0x18: [io 0xf800-0xf807]
    [ 0.121217] pci 0000:00:1f.2: reg 0x1c: [io 0xf700-0xf703]
    [ 0.121228] pci 0000:00:1f.2: reg 0x20: [io 0xf600-0xf60f]
    [ 0.121238] pci 0000:00:1f.2: reg 0x24: [mem 0xfdffe000-0xfdffe3ff]
    [ 0.121284] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.121418] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    [ 0.121478] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
    [ 0.121706] pci 0000:01:00.0: [10de:0a65] type 00 class 0x030000
    [ 0.121722] pci 0000:01:00.0: reg 0x10: [mem 0xfb000000-0xfbffffff]
    [ 0.121737] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.121752] pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
    [ 0.121762] pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
    [ 0.121773] pci 0000:01:00.0: reg 0x30: [mem 0xfcf00000-0xfcf7ffff pref]
    [ 0.121887] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
    [ 0.121903] pci 0000:01:00.1: reg 0x10: [mem 0xfcffc000-0xfcffffff]
    [ 0.126691] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.126697] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.126703] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
    [ 0.126709] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
    [ 0.126783] pci 0000:02:01.0: [1106:3044] type 00 class 0x0c0010
    [ 0.126806] pci 0000:02:01.0: reg 0x10: [mem 0xfdeff000-0xfdeff7ff]
    [ 0.126819] pci 0000:02:01.0: reg 0x14: [io 0xef00-0xef7f]
    [ 0.126902] pci 0000:02:01.0: supports D2
    [ 0.126905] pci 0000:02:01.0: PME# supported from D2 D3hot D3cold
    [ 0.126989] pci 0000:02:05.0: [10ec:8169] type 00 class 0x020000
    [ 0.127012] pci 0000:02:05.0: reg 0x10: [io 0xec00-0xecff]
    [ 0.127025] pci 0000:02:05.0: reg 0x14: [mem 0xfdefe000-0xfdefe0ff]
    [ 0.127075] pci 0000:02:05.0: reg 0x30: [mem 0xfdec0000-0xfdedffff pref]
    [ 0.127109] pci 0000:02:05.0: supports D1 D2
    [ 0.127113] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.127196] pci 0000:02:08.0: [8086:27dc] type 00 class 0x020000
    [ 0.127218] pci 0000:02:08.0: reg 0x10: [mem 0xfdefd000-0xfdefdfff]
    [ 0.127230] pci 0000:02:08.0: reg 0x14: [io 0xee00-0xee3f]
    [ 0.127308] pci 0000:02:08.0: supports D1 D2
    [ 0.127311] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.127410] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
    [ 0.127417] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.127423] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.127431] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    [ 0.127435] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    [ 0.127448] pci_bus 0000:00: on NUMA node 0
    [ 0.128183] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
    [ 0.128303] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
    [ 0.128422] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.128542] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
    [ 0.128661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
    [ 0.128780] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.128900] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.129019] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
    [ 0.129353] ACPI: Enabled 2 GPEs in block 00 to 1F
    [ 0.129366] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.129414] Found 1 acpi root devices
    [ 0.129499] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.129499] vgaarb: loaded
    [ 0.129499] vgaarb: bridge control possible 0000:01:00.0
    [ 0.129499] PCI: Using ACPI for IRQ routing
    [ 0.131455] PCI: pci_cache_line_size set to 64 bytes
    [ 0.131514] e820: reserve RAM buffer [mem 0x00098800-0x0009ffff]
    [ 0.131517] e820: reserve RAM buffer [mem 0xcfedf800-0xcfffffff]
    [ 0.131681] NetLabel: Initializing
    [ 0.131684] NetLabel: domain hash size = 128
    [ 0.131686] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.131709] NetLabel: unlabeled traffic allowed by default
    [ 0.131784] Switched to clocksource refined-jiffies
    [ 0.141221] pnp: PnP ACPI init
    [ 0.141249] ACPI: bus type PNP registered
    [ 0.141516] system 00:00: [io 0x04d0-0x04d1] has been reserved
    [ 0.141521] system 00:00: [io 0x0800-0x087f] has been reserved
    [ 0.141526] system 00:00: [io 0x0880-0x088f] has been reserved
    [ 0.141533] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.141554] pnp 00:01: [dma 4]
    [ 0.141597] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.141664] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.141714] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.141773] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.142316] pnp 00:05: [dma 3]
    [ 0.142386] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.142549] system 00:06: [io 0x0400-0x04bf] has been reserved
    [ 0.142556] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.142624] pnp 00:07: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.143002] system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.143009] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.143327] system 00:09: [mem 0x000d4800-0x000d7fff] has been reserved
    [ 0.143339] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
    [ 0.143344] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
    [ 0.143349] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
    [ 0.143353] system 00:09: [mem 0xcfee0000-0xcfefffff] could not be reserved
    [ 0.143357] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.143361] system 00:09: [mem 0x00100000-0xcfedffff] could not be reserved
    [ 0.143365] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.143370] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.143374] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
    [ 0.143378] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.143382] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
    [ 0.143387] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.143401] pnp: PnP ACPI: found 10 devices
    [ 0.143404] ACPI: bus type PNP unregistered
    [ 0.181586] Switched to clocksource acpi_pm
    [ 0.181620] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.181626] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 0.181632] pci 0000:00:01.0: bridge window [mem 0xfb000000-0xfcffffff]
    [ 0.181637] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
    [ 0.181644] pci 0000:00:1e.0: PCI bridge to [bus 02]
    [ 0.181649] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.181655] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff]
    [ 0.181797] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.181804] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.181808] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.181812] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.181815] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
    [ 0.181819] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
    [ 0.181823] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.181826] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
    [ 0.181830] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
    [ 0.181833] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
    [ 0.181886] NET: Registered protocol family 2
    [ 0.182168] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.182210] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.182250] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.182288] TCP: reno registered
    [ 0.182293] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.182304] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.182388] NET: Registered protocol family 1
    [ 0.182388] pci 0000:01:00.0: Boot video device
    [ 0.182388] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
    [ 0.182388] PCI: CLS 32 bytes, default 64
    [ 0.182388] Unpacking initramfs...
    [ 3.767636] Freeing initrd memory: 17220K (f672d000 - f77fe000)
    [ 3.767832] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 3.767836] apm: disabled - APM is not SMP safe.
    [ 3.767883] Scanning for low memory corruption every 60 seconds
    [ 3.768350] audit: initializing netlink socket (disabled)
    [ 3.768369] type=2000 audit(1400530145.763:1): initialized
    [ 3.783776] bounce pool size: 64 pages
    [ 3.783794] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 3.786252] zbud: loaded
    [ 3.786379] VFS: Disk quotas dquot_6.5.2
    [ 3.786456] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 3.786770] msgmni has been set to 1692
    [ 3.787189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 3.787246] io scheduler noop registered
    [ 3.787250] io scheduler deadline registered
    [ 3.787303] io scheduler cfq registered (default)
    [ 3.787440] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 3.787553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 3.787585] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 3.787808] GHES: HEST is not enabled!
    [ 3.787828] isapnp: Scanning for PnP cards...
    [ 4.143916] isapnp: No Plug & Play device found
    [ 4.144002] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 4.144834] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 4.393708] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 4.393902] mousedev: PS/2 mouse device common for all mice
    [ 4.394026] rtc_cmos 00:02: RTC can wake from S4
    [ 4.394188] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 4.394220] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
    [ 4.394271] cpuidle: using governor ladder
    [ 4.394275] cpuidle: using governor menu
    [ 4.394354] drop_monitor: Initializing network drop monitor service
    [ 4.394463] TCP: cubic registered
    [ 4.394689] NET: Registered protocol family 10
    [ 4.394926] NET: Registered protocol family 17
    [ 4.394941] Key type dns_resolver registered
    [ 4.395148] Using IPI No-Shortcut mode
    [ 4.395277] PM: Hibernation image not present or could not be loaded.
    [ 4.395295] registered taskstats version 1
    [ 4.395849] Magic number: 14:160:195
    [ 4.395919] rtc_cmos 00:02: setting system clock to 2014-05-19 20:09:06 UTC (1400530146)
    [ 4.396373] Freeing unused kernel memory: 608K (c06e9000 - c0781000)
    [ 4.396483] Write protecting the kernel text: 4264k
    [ 4.396526] Write protecting the kernel read-only data: 1360k
    [ 4.409586] systemd-udevd[47]: starting version 208
    [ 4.441220] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 4.441231] ACPI: Power Button [PWRB]
    [ 4.441342] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 4.441349] ACPI: Power Button [PWRF]
    [ 4.453112] Linux agpgart interface v0.103
    [ 4.456375] [drm] Initialized drm 1.1.0 20060810
    [ 4.458668] wmi: Mapper loaded
    [ 4.464289] ACPI: bus type USB registered
    [ 4.464341] usbcore: registered new interface driver usbfs
    [ 4.464366] usbcore: registered new interface driver hub
    [ 4.465442] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 4.465645] r8169 0000:02:05.0 (unregistered net_device): not PCI Express
    [ 4.466029] r8169 0000:02:05.0 eth0: RTL8110s at 0xf850e000, 00:1e:2a:c2:08:13, XID 04000000 IRQ 17
    [ 4.466034] r8169 0000:02:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
    [ 4.466473] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
    [ 4.466476] e100: Copyright(c) 1999-2006 Intel Corporation
    [ 4.468849] SCSI subsystem initialized
    [ 4.470129] usbcore: registered new device driver usb
    [ 4.472537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 4.472967] uhci_hcd: USB Universal Host Controller Interface driver
    [ 4.473145] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 4.473151] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 4.473162] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 4.473215] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
    [ 4.474467] hub 1-0:1.0: USB hub found
    [ 4.474476] hub 1-0:1.0: 2 ports detected
    [ 4.476265] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 4.476273] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 4.476283] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [ 4.476285] ehci-pci: EHCI PCI platform driver
    [ 4.476334] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
    [ 4.477340] ACPI: bus type ATA registered
    [ 4.478267] hub 2-0:1.0: USB hub found
    [ 4.478276] hub 2-0:1.0: 2 ports detected
    [ 4.478975] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 4.479324] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 4.479335] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
    [ 4.483257] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
    [ 4.483270] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
    [ 4.483319] libata version 3.00 loaded.
    [ 4.490116] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 4.490318] hub 3-0:1.0: USB hub found
    [ 4.490328] hub 3-0:1.0: 8 ports detected
    [ 4.497666] e100 0000:02:08.0 eth1: addr 0xfdefd000, irq 20, MAC addr 00:17:31:0e:7b:1b
    [ 4.498311] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8280a2
    [ 4.498316] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
    [ 4.498320] nouveau [ DEVICE][0000:01:00.0] Family : NV50
    [ 4.499944] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
    [ 4.513467] hub 1-0:1.0: USB hub found
    [ 4.513476] hub 1-0:1.0: 2 ports detected
    [ 4.536751] hub 2-0:1.0: USB hub found
    [ 4.536759] hub 2-0:1.0: 2 ports detected
    [ 4.537041] ata_piix 0000:00:1f.1: version 2.13
    [ 4.537215] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 4.538319] scsi0 : ata_piix
    [ 4.539121] scsi1 : ata_piix
    [ 4.539242] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
    [ 4.539246] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
    [ 4.539349] ahci 0000:00:1f.2: version 3.0
    [ 4.539518] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 4.539607] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
    [ 4.539612] ahci 0000:00:1f.2: flags: 64bit ncq led clo
    [ 4.539618] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.540696] scsi2 : ahci
    [ 4.540853] scsi3 : ahci
    [ 4.540977] scsi4 : ahci
    [ 4.541096] scsi5 : ahci
    [ 4.541226] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 41
    [ 4.541231] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 41
    [ 4.541235] ata5: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 41
    [ 4.541239] ata6: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 41
    [ 4.541389] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 4.541395] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 4.541406] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [ 4.541450] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
    [ 4.541676] hub 4-0:1.0: USB hub found
    [ 4.541683] hub 4-0:1.0: 2 ports detected
    [ 4.541931] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [ 4.541937] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [ 4.541946] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [ 4.541985] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
    [ 4.542120] ata2: port disabled--ignoring
    [ 4.542317] hub 5-0:1.0: USB hub found
    [ 4.542325] hub 5-0:1.0: 2 ports detected
    [ 4.563395] firewire_ohci 0000:02:01.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
    [ 4.574546] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
    [ 4.574552] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
    [ 4.574662] nouveau [ VBIOS][0000:01:00.0] BIT signature found
    [ 4.574667] nouveau [ VBIOS][0000:01:00.0] version 70.18.36.00.00
    [ 4.575237] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
    [ 4.575243] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
    [ 4.575247] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
    [ 4.713759] ata1.00: ATAPI: TSSTcorpCD/DVDW TS-H652L, 0803, max UDMA/33
    [ 4.743671] ata1.00: configured for UDMA/33
    [ 4.744629] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H652L 0803 PQ: 0 ANSI: 5
    [ 4.770051] tsc: Refined TSC clocksource calibration: 3000.853 MHz
    [ 4.860047] ata3: SATA link down (SStatus 0 SControl 300)
    [ 5.020046] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.020077] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.021034] ata5.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
    [ 5.021039] ata5.00: 156301488 sectors, multi 0: LBA
    [ 5.021915] ata5.00: configured for UDMA/100
    [ 5.023691] ata4.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
    [ 5.023695] ata4.00: 156301488 sectors, multi 0: LBA
    [ 5.024602] ata4.00: configured for UDMA/100
    [ 5.024731] scsi 3:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
    [ 5.025019] scsi 4:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5
    [ 5.063459] firewire_core 0000:02:01.0: created device fw0: GUID 0011d800009e9dd1, S400
    [ 5.090025] usb 1-1: new low-speed USB device number 2 using uhci_hcd
    [ 5.180043] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.184039] ata6.00: ATA-6: ST380011A, 3.04, max UDMA/100
    [ 5.184044] ata6.00: 156301488 sectors, multi 0: LBA48
    [ 5.188337] ata6.00: configured for UDMA/100
    [ 5.188461] scsi 5:0:0:0: Direct-Access ATA ST380011A 3.04 PQ: 0 ANSI: 5
    [ 5.199621] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 5.199627] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 5.199923] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 5.200185] sd 3:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 5.200346] sd 3:0:0:0: [sda] Write Protect is off
    [ 5.200351] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.200393] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.200900] sd 4:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 5.200997] sd 4:0:0:0: [sdb] Write Protect is off
    [ 5.201002] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 5.201043] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.201527] sd 5:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [ 5.201623] sd 5:0:0:0: [sdc] Write Protect is off
    [ 5.201627] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 5.201669] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 5.207456] sdc: sdc1
    [ 5.207886] sd 5:0:0:0: [sdc] Attached SCSI disk
    [ 5.235174] sda: sda1 sda2 < sda5 >
    [ 5.235744] sd 3:0:0:0: [sda] Attached SCSI disk
    [ 5.237596] sdb: sdb1 sdb2 < sdb5 >
    [ 5.238117] sd 4:0:0:0: [sdb] Attached SCSI disk
    [ 5.260907] hidraw: raw HID events driver (C) Jiri Kosina
    [ 5.277654] usbcore: registered new interface driver usbhid
    [ 5.277659] usbhid: USB HID core driver
    [ 5.280199] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input2
    [ 5.280357] hid-generic 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1/input0
    [ 5.770105] Switched to clocksource tsc
    [ 6.481687] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
    [ 6.481702] nouveau [ PTHERM][0000:01:00.0] fan management: disabled
    [ 6.481708] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
    [ 6.481900] [TTM] Zone kernel: Available graphics memory: 433706 kiB
    [ 6.481904] [TTM] Zone highmem: Available graphics memory: 1682412 kiB
    [ 6.481907] [TTM] Initializing pool allocator
    [ 6.481924] nouveau [ DRM] VRAM: 512 MiB
    [ 6.481927] nouveau [ DRM] GART: 1048576 MiB
    [ 6.481933] nouveau [ DRM] TMDS table version 2.0
    [ 6.481936] nouveau [ DRM] DCB version 4.0
    [ 6.481940] nouveau [ DRM] DCB outp 00: 01000302 00020030
    [ 6.481944] nouveau [ DRM] DCB outp 01: 02000300 00000000
    [ 6.481948] nouveau [ DRM] DCB outp 03: 02011362 00020010
    [ 6.481951] nouveau [ DRM] DCB outp 04: 01022310 00000000
    [ 6.481954] nouveau [ DRM] DCB conn 00: 00001030
    [ 6.481959] nouveau [ DRM] DCB conn 01: 00202161
    [ 6.481964] nouveau [ DRM] DCB conn 02: 00000200
    [ 6.505501] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.505505] [drm] No driver support for vblank timestamp query.
    [ 6.505631] nouveau [ DRM] 2 available performance level(s)
    [ 6.505637] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 900mV
    [ 6.505642] nouveau [ DRM] 3: core 589MHz shader 1402MHz memory 405MHz voltage 1000mV
    [ 6.505646] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz voltage 900mV
    [ 6.531333] nouveau [ DRM] MM: using COPY for buffer copies
    [ 6.581567] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo f7015a00
    [ 6.581724] fbcon: nouveaufb (fb0) is primary device
    [ 6.653923] Console: switching to colour frame buffer device 160x64
    [ 6.655952] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
    [ 6.655955] nouveau 0000:01:00.0: registered panic notifier
    [ 6.655962] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
    [ 7.082698] ISO 9660 Extensions: RRIP_1991A
    [ 7.168774] loop: module loaded
    [ 8.253583] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [ 8.355925] device-mapper: uevent: version 1.0.3
    [ 8.356608] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
    [ 8.362693] bio: create slab <bio-1> at 1
    [ 8.386733] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
    [ 10.338096] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 10.417677] systemd[1]: Set hostname to <archiso>.
    [ 10.724871] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 10.724981] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 10.725005] systemd[1]: Starting Remote File Systems.
    [ 10.725151] systemd[1]: Reached target Remote File Systems.
    [ 10.725172] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 10.725323] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 10.725343] systemd[1]: Starting Delayed Shutdown Socket.
    [ 10.725469] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 10.725488] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 10.725627] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 10.725646] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 10.725770] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 10.725790] systemd[1]: Starting Root Slice.
    [ 10.726156] systemd[1]: Created slice Root Slice.
    [ 10.726176] systemd[1]: Starting User and Session Slice.
    [ 10.726413] systemd[1]: Created slice User and Session Slice.
    [ 10.726434] systemd[1]: Starting System Slice.
    [ 10.726647] systemd[1]: Created slice System Slice.
    [ 10.726682] systemd[1]: Starting system-getty.slice.
    [ 10.726921] systemd[1]: Created slice system-getty.slice.
    [ 10.726941] systemd[1]: Starting Slices.
    [ 10.727040] systemd[1]: Reached target Slices.
    [ 10.727064] systemd[1]: Starting Journal Socket.
    [ 10.727235] systemd[1]: Listening on Journal Socket.
    [ 10.727662] systemd[1]: Starting Load Kernel Modules...
    [ 10.728292] systemd[1]: Mounting POSIX Message Queue File System...
    [ 10.880863] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 10.881454] systemd[1]: Starting Journal Service...
    [ 10.882180] systemd[1]: Started Journal Service.
    [ 11.716066] systemd-journald[149]: Vacuuming done, freed 0 bytes
    [ 11.916159] FS-Cache: Loaded
    [ 12.202893] RPC: Registered named UNIX socket transport module.
    [ 12.202899] RPC: Registered udp transport module.
    [ 12.202902] RPC: Registered tcp transport module.
    [ 12.202904] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 12.619444] FS-Cache: Netfs 'nfs' registered for caching
    [ 12.812715] systemd-udevd[181]: starting version 208
    [ 12.905896] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 15.580133] thermal LNXTHERM:00: registered as thermal_zone0
    [ 15.580139] ACPI: Thermal Zone [THRM] (40 C)
    [ 15.915160] ACPI: Fan [FAN] (on)
    [ 16.002108] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM2S 1 (20130517/utaddress-251)
    [ 16.002119] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PM1K 2 (20130517/utaddress-251)
    [ 16.002126] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GPE1 3 (20130517/utaddress-251)
    [ 16.002133] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.002139] ACPI Warning: 0x000004b0-0x000004bf SystemIO conflicts with Region \GPO2 1 (20130517/utaddress-251)
    [ 16.002145] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.002148] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPIV 1 (20130517/utaddress-251)
    [ 16.002153] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \GPO_ 2 (20130517/utaddress-251)
    [ 16.002158] ACPI Warning: 0x00000480-0x000004af SystemIO conflicts with Region \PALD 3 (20130517/utaddress-251)
    [ 16.002164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.002166] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 16.342474] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 16.403348] leds_ss4200: no LED devices found
    [ 16.664449] parport_pc 00:05: reported by Plug and Play ACPI
    [ 16.664509] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
    [ 16.686843] systemd-udevd[203]: renamed network interface eth0 to enp2s5
    [ 16.770163] systemd-udevd[209]: renamed network interface eth1 to enp2s8
    [ 17.098798] input: PC Speaker as /devices/platform/pcspkr/input/input3
    [ 17.779883] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 17.780620] ppdev: user-space parallel port driver
    [ 17.849790] microcode: CPU0 sig=0xf62, pf=0x4, revision=0xf
    [ 17.944384] iTCO_vendor_support: vendor-support=0
    [ 17.946278] microcode: CPU1 sig=0xf62, pf=0x4, revision=0xf
    [ 17.947486] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 17.950629] r8169 0000:02:05.0 enp2s5: link down
    [ 17.950649] r8169 0000:02:05.0 enp2s5: link down
    [ 17.950666] IPv6: ADDRCONF(NETDEV_UP): enp2s5: link is not ready
    [ 17.965112] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
    [ 18.405080] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 18.405126] iTCO_wdt: Found a ICH7DH TCO device (Version=2, TCOBASE=0x0460)
    [ 18.405284] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 18.872915] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
    [ 19.433622] hda_codec: ALC882: SKU not ready 0x411111f0
    [ 19.445025] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
    [ 19.479013] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 19.479156] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 19.479804] hda_intel: Disabling MSI
    [ 19.479816] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 20.178014] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
    [ 20.178270] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
    [ 20.178485] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 20.178696] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
    [44490.433683] md: bind<sda1>
    [44490.446722] md: bind<sdb1>
    [44490.449241] md: raid1 personality registered for level 1
    [44490.450198] md/raid1:md1: not clean -- starting background reconstruction
    [44490.450203] md/raid1:md1: active with 2 out of 2 mirrors
    [44490.450235] md1: detected capacity change from 0 to 75934400512
    [44490.452050] md: resync of RAID array md1
    [44490.452056] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
    [44490.452059] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
    [44490.452064] md: using 128k window, over a total of 74154688k.
    [44490.454641] md1: unknown partition table
    [45968.754029] md: md1: resync done.
    [45968.841250] RAID1 conf printout:
    [45968.841254] --- wd:2 rd:2
    [45968.841258] disk 0, wo:0, o:1, dev:sda1
    [45968.841261] disk 1, wo:0, o:1, dev:sdb1
    [47642.847783] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
    [47687.134362] r8169 0000:02:05.0 enp2s5: link up
    [47687.134376] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s5: link becomes ready
    [47825.775238] usb 3-6: new high-speed USB device number 3 using ehci-pci
    [47825.899362] usb 3-6: unable to get BOS descriptor set
    [47826.017245] usb-storage 3-6:1.0: USB Mass Storage device detected
    [47826.017363] scsi6 : usb-storage 3-6:1.0
    [47826.017504] usbcore: registered new interface driver usb-storage
    [47827.081919] scsi 6:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
    [47827.802316] sd 6:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
    [47827.804809] sd 6:0:0:0: [sdd] Write Protect is off
    [47827.804814] sd 6:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [47827.807314] sd 6:0:0:0: [sdd] No Caching mode page found
    [47827.807763] sd 6:0:0:0: [sdd] Assuming drive cache: write through
    [47827.816453] sd 6:0:0:0: [sdd] No Caching mode page found
    [47827.816915] sd 6:0:0:0: [sdd] Assuming drive cache: write through
    [47827.845089] sdd: sdd1
    [47827.851818] sd 6:0:0:0: [sdd] No Caching mode page found
    [47827.852305] sd 6:0:0:0: [sdd] Assuming drive cache: write through
    [47827.852776] sd 6:0:0:0: [sdd] Attached SCSI removable disk
    [47901.177187] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [48255.001967] usb 3-6: USB disconnect, device number 3
    [48456.278507] usb 3-6: new high-speed USB device number 4 using ehci-pci
    [48456.402614] usb 3-6: unable to get BOS descriptor set
    [48456.425683] usb-storage 3-6:1.0: USB Mass Storage device detected
    [48456.425763] scsi7 : usb-storage 3-6:1.0
    [48457.491544] scsi 7:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
    [48458.209938] sd 7:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
    [48458.212437] sd 7:0:0:0: [sdd] Write Protect is off
    [48458.212442] sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [48458.214932] sd 7:0:0:0: [sdd] No Caching mode page found
    [48458.215426] sd 7:0:0:0: [sdd] Assuming drive cache: write through
    [48458.224684] sd 7:0:0:0: [sdd] No Caching mode page found
    [48458.225143] sd 7:0:0:0: [sdd] Assuming drive cache: write through
    [48458.253332] sdd: sdd1
    [48458.265813] sd 7:0:0:0: [sdd] No Caching mode page found
    [48458.266295] sd 7:0:0:0: [sdd] Assuming drive cache: write through
    [48458.266755] sd 7:0:0:0: [sdd] Attached SCSI removable disk
    [48470.450341] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [50093.387926] Adding 3930408k swap on /dev/sda5. Priority:-1 extents:1 across:3930408k FS
    [50096.410969] Adding 3930408k swap on /dev/sdb5. Priority:-2 extents:1 across:3930408k FS
    [54374.314336] ata4.00: exception Emask 0x50 SAct 0x0 SErr 0x480900 action 0x6 frozen
    [54374.314836] ata4.00: irq_stat 0x08000000, interface fatal error
    [54374.315323] ata4: SError: { UnrecovData HostInt 10B8B Handshk }
    [54374.315764] ata4.00: failed command: WRITE DMA
    [54374.316198] ata4.00: cmd ca/00:88:9f:ca:8d/00:00:00:00:00/e8 tag 0 dma 69632 out
    res 50/00:00:9e:ca:8d/00:00:9e:c9:8d/e8 Emask 0x50 (ATA bus error)
    [54374.317334] ata4.00: status: { DRDY }
    [54374.318002] ata4: hard resetting link
    [54374.904585] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [54374.906314] ata4.00: configured for UDMA/100
    [54374.906332] ata4: EH complete
    [56161.610355] sdd: detected capacity change from 7918845952 to 0
    [56178.066775] usb 3-6: USB disconnect, device number 4
    [56193.205154] ata6: exception Emask 0x50 SAct 0x0 SErr 0x90800 action 0xe frozen
    [56193.205703] ata6: irq_stat 0x00400000, PHY RDY changed
    [56193.206232] ata6: SError: { HostInt PHYRdyChg 10B8B }
    [56193.206732] ata6: hard resetting link
    [56193.924403] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [56193.932798] ata6.00: configured for UDMA/100
    [56193.932805] ata6: EH complete
    [56195.044927] ata6: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
    [56195.045472] ata6: irq_stat 0x00400000, PHY RDY changed
    [56195.046003] ata6: SError: { PHYRdyChg 10B8B }
    [56195.046511] ata6: hard resetting link
    [56195.764407] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [56195.772826] ata6.00: configured for UDMA/100
    [56195.772832] ata6: EH complete
    [56217.331067] usb 3-6: new high-speed USB device number 5 using ehci-pci
    [56217.455149] usb 3-6: unable to get BOS descriptor set
    [56217.478526] usb-storage 3-6:1.0: USB Mass Storage device detected
    [56217.478662] scsi8 : usb-storage 3-6:1.0
    [56218.544212] scsi 8:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 4
    [56219.262349] sd 8:0:0:0: [sdd] 15466496 512-byte logical blocks: (7.91 GB/7.37 GiB)
    [56219.264849] sd 8:0:0:0: [sdd] Write Protect is off
    [56219.264855] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [56219.267343] sd 8:0:0:0: [sdd] No Caching mode page found
    [56219.267939] sd 8:0:0:0: [sdd] Assuming drive cache: write through
    [56219.277220] sd 8:0:0:0: [sdd] No Caching mode page found
    [56219.277802] sd 8:0:0:0: [sdd] Assuming drive cache: write through
    [56219.305984] sdd: sdd1
    [56219.318099] sd 8:0:0:0: [sdd] No Caching mode page found
    [56219.318677] sd 8:0:0:0: [sdd] Assuming drive cache: write through
    [56219.319238] sd 8:0:0:0: [sdd] Attached SCSI removable disk
    [56234.556099] FAT-fs (sdd1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    Edit: Just after I took out my flashdrive, when I accidentally bumped one of the HDs, this popped up:
    [56193.205154] ata6: exception Emask 0x50 SAct 0x0 SErr 0x90800 action 0xe frozen
    [56193.205703] ata6: irq_stat 0x00400000, PHY RDY changed
    [56193.206232] ata6: SError: { HostInt PHYRdyChg 10B8B }
    [56193.206732] ata6: hard resetting link
    [56193.924403] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [56193.932798] ata6.00: configured for UDMA/100
    [56193.932805] ata6: EH complete
    [56195.044927] ata6: exception Emask 0x10 SAct 0x0 SErr 0x90000 action 0xe frozen
    [56195.045472] ata6: irq_stat 0x00400000, PHY RDY changed
    [56195.046003] ata6: SError: { PHYRdyChg 10B8B }
    [56195.046511] ata6: hard resetting link
    Last edited by Dornith (2014-05-20 16:08:40)

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • Error message when installing nvidia-173xx package

    I get an error message when I try to install nvidia-173xx driver:
    pacaur -S nvidia-173xx
    :: Package(s) nvidia-173xx not found in repositories, trying AUR...
    :: resolving dependencies...
    cat: /usr/lib/modules/extramodules-3.15-ARCH/version: No such file or directory
    :: no results found for linux
    :: no results found for linux-headers
    My kernel version: 3.16.1-1-ARCH
    What can I do to install it correctly?

    nvidia-173xx AUR page wrote:inux>=3.15.5
    linux<3.16
    linux-headers>=3.15.5 (make)
    linux-headers<3.16 (make)
    nvidia-173xx-utils
    Looks like you can choose from :
    -contact the maintainer to see if you can help with getting it to work with kernel 3.16
    - downgrade the kernel
    - switch to nouveau
    Note that there are comments on the aur page that state nvidia-173xx doesn't work with xorg 1.16, so you may have to downgrade more then just the kernel.

  • [Solved] HP Omen 15 - Slow SSD after IRQ 16 error

    [EDIT]
    Sorry for wasting everyone's time. It turned out that I had only tried installing nvidia/bumblebee without the nomodeset option..and apparently that didn't work properly for some reason.
    So if anyone else runs into this problem here's the solution:
    1) Boot your installation media with the 'nomodeset' kernel option (this is especially important for live images (fedora,ubuntu,...) which are completely unusable otherwise
    2) With nomodeset still enabled, install the nvidia driver, bumblebee and bbswitch
    4) Enable bumblebeed.service
    3) remove the nomodeset option
    Also I updated the microcode on the CPU, but as far as I could tell that didn't affect anything.
    [/EDIT]
    Hi everyone,
    I bought a new HP Omen 15 laptop. In Windows everything runs fine, but on Linux I get an IRQ 16 error after which SSD reads become so painfully slow that the system becomes mostly unusable. This issue has been posted by someone on the Ubuntu forums, but nobody had a solution there.
    Hopefully one of you will be able to help me, because right now I'm stuck on Windows for doing my work...and I get absolutely no joy out of that
    Hardware:
    i7-4710HQ
    Nvidia GeForce GTX 860 and Intel® HD Graphics 4600
    512GB Samsung XP941 SSD (M.2)
    Currently the system dual-boots with Windows 8.1, secure boot disabled, using gummiboot on the windows UEFI partition.
    The actual error that (I think) leads to the performance hit is
    [ 13.608625] 0000000000000000 96859b6ad089d33d ffff88045f243e28 ffffffff8154fb74
    [ 13.608632] 0000000000000000 ffff880083514e00 ffff88045f243e58 ffffffff810cd406
    [ 13.608637] 000000013ffeb056 ffff880083514e00 0000000000000000 0000000000000010
    [ 13.608643] Call Trace:
    [ 13.608646] <IRQ> [<ffffffff8154fb74>] dump_stack+0x4e/0x71
    [ 13.608665] [<ffffffff810cd406>] __report_bad_irq+0x36/0xd0
    [ 13.608671] [<ffffffff810cd7b7>] note_interrupt+0x257/0x2a0
    [ 13.608677] [<ffffffff810cacee>] handle_irq_event_percpu+0xae/0x1f0
    [ 13.608682] [<ffffffff810cae71>] handle_irq_event+0x41/0x70
    [ 13.608689] [<ffffffff810cdd47>] handle_fasteoi_irq+0x87/0x140
    [ 13.608698] [<ffffffff81017362>] handle_irq+0x22/0x40
    [ 13.608704] [<ffffffff815581b1>] do_IRQ+0x51/0xf0
    [ 13.608711] [<ffffffff815561ad>] common_interrupt+0x6d/0x6d
    [ 13.608714] <EOI> [<ffffffff81403aa5>] ? cpuidle_enter_state+0x65/0x1a0
    [ 13.608730] [<ffffffff81403a91>] ? cpuidle_enter_state+0x51/0x1a0
    [ 13.608737] [<ffffffff81403cc7>] cpuidle_enter+0x17/0x20
    [ 13.608745] [<ffffffff810b3539>] cpu_startup_entry+0x3d9/0x460
    [ 13.608752] [<ffffffff8104a994>] start_secondary+0x1b4/0x1f0
    [ 13.608756] handlers:
    [ 13.608809] [<ffffffffa0128410>] ahci_single_irq_intr [libahci]
    [ 13.608873] Disabling IRQ #16
    What's interesting is, that this problem does not occur if I set the 'nomodeset' kernel option. So probably it's somehow related to graphics. The performance drop is quite visible:
    With nomodeset:
    hdparm -Tt --verbose /dev/sda
    /dev/sda:
    Timing cached reads: 21006 MB in 2.00 seconds = 10513.48 MB/sec
    Timing buffered disk reads: 2378 MB in 3.00 seconds = 792.36 MB/sec
    ...and without:
    hdparm -Tt --verbose /dev/sda
    /dev/sda:
    Timing cached reads: 12274 MB in 2.00 seconds = 6140.85 MB/sec
    Timing buffered disk reads: 8 MB in 3.20 seconds = 2.50 MB/sec
    So just about 0.3% of the original speed.
    The above information are form a fresh install without any additional packages installed. Installing nvidia/intel/bumblebee did not help either, so I've left it in the fresh state to be debuggable.
    Here are various outputs from some commands that might be useful to determine the error source, let me know if you need anything else!
    hdparm /dev/sda
    /dev/sda:
    multcount = 0 (off)
    IO_support = 1 (32-bit)
    readonly = 0 (off)
    readahead = 256 (on)
    geometry = 62260/255/63, sectors = 1000215216, start = 0
    lspci
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
    07:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01)
    08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
    09:00.0 Network controller: Intel Corporation Wireless 7260 (rev c3)
    cat /proc/interrupts
    CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
    0: 24 0 0 0 0 0 0 0 IR-IO-APIC-edge timer
    1: 901 2 2 1 3 1 1 0 IR-IO-APIC-edge i8042
    8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0
    9: 199 49 37 75 13 25 6 18 IR-IO-APIC-fasteoi acpi
    12: 4419 17 5 8 2 6 7 7 IR-IO-APIC-edge i8042
    16: 3146 195401 312 395 353 184 102 108 IR-IO-APIC 16-fasteoi 0000:07:00.0
    24: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
    25: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar1
    26: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    27: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    28: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    29: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
    30: 6 1 2 9 1 0 1 2 IR-PCI-MSI-edge rtsx_pci
    31: 574 190 28 34 154 29 11 7 IR-PCI-MSI-edge xhci_hcd
    32: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge 0000:00:1f.2
    33: 1 0 0 0 0 0 3 7 IR-PCI-MSI-edge mei_me
    34: 5 138 79 0 5 76 10 0 IR-PCI-MSI-edge snd_hda_intel
    35: 169 0 1 0 1 0 0 0 IR-PCI-MSI-edge i915
    36: 17 3 2 7 6 14 2 11 IR-PCI-MSI-edge iwlwifi
    37: 1 26 0 0 32 0 0 0 IR-PCI-MSI-edge snd_hda_intel
    NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
    LOC: 958 2678 1069 355 1505 562 682 321 Local timer interrupts
    SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
    PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
    IWI: 1 1 0 1 0 0 0 0 IRQ work interrupts
    RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries
    RES: 204 193 207 200 136 177 195 285 Rescheduling interrupts
    CAL: 898 819 847 830 822 853 843 869 Function call interrupts
    TLB: 10 6 8 3 4 7 3 5 TLB shootdowns
    TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
    THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
    MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
    MCP: 2 2 2 2 2 2 2 2 Machine check polls
    HYP: 0 0 0 0 0 0 0 0 Hypervisor callback interrupts
    ERR: 0
    MIS: 0
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c07efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] e820: update [mem 0x78e8e018-0x78ea7657] usable ==> usable
    [ 0.000000] e820: update [mem 0x78e7d018-0x78e8d057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000078e7d017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078e7d018-0x0000000078e8d057] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078e8d058-0x0000000078e8e017] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078e8e018-0x0000000078ea7657] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000078ea7658-0x000000009c07efff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
    [ 0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
    [ 0.000000] efi: EFI v2.31 by INSYDE Corp.
    [ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce7df18
    [ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x000000000006f000) (0MB)
    [ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
    [ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000088000) (0MB)
    [ 0.000000] efi: mem05: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
    [ 0.000000] efi: mem06: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e3b000) (14MB)
    [ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e3b000-0x0000000078680000) (1896MB)
    [ 0.000000] efi: mem10: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000078680000-0x00000000786a0000) (0MB)
    [ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000786a0000-0x0000000078e7d000) (7MB)
    [ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000078e7d000-0x0000000078ea8000) (0MB)
    [ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000078ea8000-0x000000007ace3000) (30MB)
    [ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000007ace3000-0x000000007b670000) (9MB)
    [ 0.000000] efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b670000-0x000000007b67a000) (0MB)
    [ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007b67a000-0x000000007b67f000) (0MB)
    [ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b67f000-0x000000007b865000) (1MB)
    [ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000007b865000-0x000000007b87f000) (0MB)
    [ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b87f000-0x000000007f7d2000) (63MB)
    [ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007f7d2000-0x000000008001a000) (8MB)
    [ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008001a000-0x0000000081106000) (16MB)
    [ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081106000-0x00000000815f5000) (4MB)
    [ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000815f5000-0x000000008161b000) (0MB)
    [ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008161b000-0x0000000081659000) (0MB)
    [ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081659000-0x00000000819e1000) (3MB)
    [ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819e1000-0x00000000819e2000) (0MB)
    [ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000819e2000-0x00000000819fe000) (0MB)
    [ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819fe000-0x0000000081a04000) (0MB)
    [ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a04000-0x0000000081a0c000) (0MB)
    [ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a0c000-0x0000000081a0d000) (0MB)
    [ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a0d000-0x0000000081a38000) (0MB)
    [ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a38000-0x0000000081a3a000) (0MB)
    [ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a3a000-0x0000000081b48000) (1MB)
    [ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081b48000-0x0000000081b49000) (0MB)
    [ 0.000000] efi: mem35: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081b49000-0x0000000081bcc000) (0MB)
    [ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bcc000-0x0000000081bd4000) (0MB)
    [ 0.000000] efi: mem37: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd4000-0x0000000081bd5000) (0MB)
    [ 0.000000] efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd5000-0x0000000081bd7000) (0MB)
    [ 0.000000] efi: mem39: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd7000-0x0000000081bd8000) (0MB)
    [ 0.000000] efi: mem40: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd8000-0x0000000081bd9000) (0MB)
    [ 0.000000] efi: mem41: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd9000-0x0000000081c1b000) (0MB)
    [ 0.000000] efi: mem42: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c1b000-0x0000000081c1c000) (0MB)
    [ 0.000000] efi: mem43: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c1c000-0x0000000081c20000) (0MB)
    [ 0.000000] efi: mem44: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c20000-0x0000000081c22000) (0MB)
    [ 0.000000] efi: mem45: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c22000-0x0000000081c2d000) (0MB)
    [ 0.000000] efi: mem46: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c2d000-0x0000000081c30000) (0MB)
    [ 0.000000] efi: mem47: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c30000-0x0000000081c52000) (0MB)
    [ 0.000000] efi: mem48: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c52000-0x0000000081c53000) (0MB)
    [ 0.000000] efi: mem49: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c53000-0x0000000081c76000) (0MB)
    [ 0.000000] efi: mem50: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c76000-0x0000000081c77000) (0MB)
    [ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c77000-0x0000000081c78000) (0MB)
    [ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c78000-0x0000000081c7a000) (0MB)
    [ 0.000000] efi: mem53: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c7a000-0x000000008387f000) (28MB)
    [ 0.000000] efi: mem54: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008387f000-0x000000009bc0e000) (387MB)
    [ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bc0e000-0x000000009c07f000) (4MB)
    [ 0.000000] efi: mem56: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c07f000-0x000000009c47f000) (4MB)
    [ 0.000000] efi: mem57: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c47f000-0x000000009c67f000) (2MB)
    [ 0.000000] efi: mem58: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009c67f000-0x000000009ce7f000) (8MB)
    [ 0.000000] efi: mem59: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009ce7f000-0x000000009cf7f000) (1MB)
    [ 0.000000] efi: mem60: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cf7f000-0x000000009cfff000) (0MB)
    [ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
    [ 0.000000] efi: mem62: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000045f600000) (13814MB)
    [ 0.000000] efi: mem63: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem64: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
    [ 0.000000] efi: mem65: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] efi: mem66: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
    [ 0.000000] efi: mem67: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] efi: mem68: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
    [ 0.000000] efi: mem69: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
    [ 0.000000] efi: mem71: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb00000-0x0000000100000000) (5MB)
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Hewlett-Packard HP OMEN Notebook PC 15/2332, BIOS F.09 12/27/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-E7FFF write-protect
    [ 0.000000] E8000-EFFFF write-combining
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7800000000 write-back
    [ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
    [ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
    [ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
    [ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
    [ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
    [ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
    [ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
    [ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9c07efff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9bffffff] page 2M
    [ 0.000000] [mem 0x9c000000-0x9c07efff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
    [ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x7f7d2000-0x80019fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM)
    [ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000F4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
    [ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: DSDT 0x000000009CFDB000 018700 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x000000009CF67000 000040
    [ 0.000000] ACPI: TCPA 0x000000009CFFD000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
    [ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: WDAT 0x000000009CFDA000 000224 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD9000 0007F6 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x000000009CFD7000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: LPIT 0x000000009CFD6000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFD5000 0003E1 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: ASPT 0x000000009CFD4000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: DBGP 0x000000009CFD3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFCB000 000539 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFCA000 000AD8 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFC6000 003361 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFBE000 003FC4 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFC5000 00040A (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: WDTT 0x000000009CFC4000 000224 (v02 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: SSDT 0x000000009CFC3000 00006B (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
    [ 0.000000] ACPI: BGRT 0x000000009CFC2000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: TPM2 0x000000009CFBD000 000044 (v03 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: DMAR 0x000000009CFBC000 0000A8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x45f5fa000-0x45f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0006efff]
    [ 0.000000] node 0: [mem 0x00070000-0x00087fff]
    [ 0.000000] node 0: [mem 0x00100000-0x9c07efff]
    [ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x45f5fffff]
    [ 0.000000] On node 0 totalpages: 4175366
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3974 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 9922 pages used for memmap
    [ 0.000000] DMA32 zone: 635008 pages, LIFO batch:31
    [ 0.000000] Normal zone: 55256 pages used for memmap
    [ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78e7d000-0x78e7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78e8d000-0x78e8dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78e8e000-0x78e8efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x78ea7000-0x78ea7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9c07f000-0x9ce7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
    [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88045f200000 s82880 r8192 d31808 u262144
    [ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4110103
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16285004K/16701464K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 416460K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:488 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.211 MHz processor
    [ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.27 BogoMIPS (lpj=8314036)
    [ 0.000023] pid_max: default: 32768 minimum: 301
    [ 0.000028] ACPI: Core revision 20140926
    [ 0.014940] ACPI: All ACPI Tables successfully acquired
    [ 0.048477] Security Framework initialized
    [ 0.048484] Yama: becoming mindful.
    [ 0.049168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.051306] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.052245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.052257] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.052448] Initializing cgroup subsys memory
    [ 0.052452] Initializing cgroup subsys devices
    [ 0.052454] Initializing cgroup subsys freezer
    [ 0.052455] Initializing cgroup subsys net_cls
    [ 0.052457] Initializing cgroup subsys blkio
    [ 0.052472] CPU: Physical Processor ID: 0
    [ 0.052473] CPU: Processor Core ID: 0
    [ 0.052476] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.053226] mce: CPU supports 9 MCE banks
    [ 0.053236] CPU0: Thermal monitoring enabled (TM1)
    [ 0.053246] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    [ 0.053323] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    [ 0.053911] Ignoring BGRT: invalid status 0 (expected 1)
    [ 0.055124] ftrace: allocating 20931 entries in 82 pages
    [ 0.061596] dmar: Host address width 39
    [ 0.061597] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.061601] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.061602] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.061605] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
    [ 0.061606] dmar: RMRR base: 0x0000009cd6f000 end: 0x0000009cd8efff
    [ 0.061606] dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
    [ 0.061670] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
    [ 0.061671] HPET id 0 under DRHD base 0xfed91000
    [ 0.061671] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.061783] Enabled IRQ remapping in x2apic mode
    [ 0.061784] Enabling x2apic
    [ 0.061784] Enabled x2apic
    [ 0.061789] Switched APIC routing to cluster x2apic.
    [ 0.062206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.095245] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.095250] TSC deadline timer enabled
    [ 0.095266] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.095280] ... version: 3
    [ 0.095281] ... bit width: 48
    [ 0.095281] ... generic registers: 4
    [ 0.095282] ... value mask: 0000ffffffffffff
    [ 0.095283] ... max period: 0000ffffffffffff
    [ 0.095283] ... fixed-purpose events: 3
    [ 0.095284] ... event mask: 000000070000000f
    [ 0.118723] x86: Booting SMP configuration:
    [ 0.118724] .... node #0, CPUs: #1
    [ 0.132727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.139403] #2 #3 #4 #5 #6 #7
    [ 0.253216] x86: Booted up 1 node, 8 CPUs
    [ 0.253219] smpboot: Total of 8 processors activated (39923.18 BogoMIPS)
    [ 0.259240] devtmpfs: initialized
    [ 0.261225] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
    [ 0.261788] pinctrl core: initialized pinctrl subsystem
    [ 0.261821] RTC time: 15:05:14, date: 03/07/15
    [ 0.261896] NET: Registered protocol family 16
    [ 0.272461] cpuidle: using governor ladder
    [ 0.285819] cpuidle: using governor menu
    [ 0.285860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.285861] ACPI: bus type PCI registered
    [ 0.285863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.285923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.285925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.286198] PCI: Using configuration type 1 for base access
    [ 0.299479] ACPI: Added _OSI(Module Device)
    [ 0.299481] ACPI: Added _OSI(Processor Device)
    [ 0.299482] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.299483] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.302912] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.305266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.306241] ACPI: Dynamic OEM Table Load:
    [ 0.306250] ACPI: SSDT 0xFFFF880448503800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
    [ 0.319415] ACPI: Dynamic OEM Table Load:
    [ 0.319425] ACPI: SSDT 0xFFFF8804485D2000 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
    [ 0.332651] ACPI: Dynamic OEM Table Load:
    [ 0.332660] ACPI: SSDT 0xFFFF88044858EE00 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
    [ 0.384073] ACPI: Interpreter enabled
    [ 0.384081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    [ 0.384088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    [ 0.384107] ACPI: (supports S0 S3 S4 S5)
    [ 0.384108] ACPI: Using IOAPIC for interrupt routing
    [ 0.384130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.388473] ACPI: Power Resource [PG00] (on)
    [ 0.390539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [ 0.390543] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.390880] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
    [ 0.391231] PCI host bridge to bus 0000:00
    [ 0.391233] pci_bus 0000:00: root bus resource [bus 00-fe]
    [ 0.391234] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.391236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.391238] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.391239] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.391240] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.391241] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.391242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.391243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.391244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.391245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.391246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.391247] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    [ 0.391249] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
    [ 0.391255] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.391363] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.391390] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.391467] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.391495] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.391503] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
    [ 0.391507] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.391511] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
    [ 0.391611] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.391617] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
    [ 0.391739] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.391754] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
    [ 0.391806] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.391878] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.391904] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.391922] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
    [ 0.391977] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.392081] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.392094] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
    [ 0.392153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.392226] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.392251] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.392316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.392392] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.392418] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 0.392477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.392552] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.392576] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
    [ 0.392635] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.392713] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.392742] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.392924] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.392937] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
    [ 0.392943] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
    [ 0.392950] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
    [ 0.392956] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
    [ 0.392962] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
    [ 0.392968] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
    [ 0.393001] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.393092] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.393105] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
    [ 0.393121] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
    [ 0.393269] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
    [ 0.393285] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
    [ 0.393301] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [ 0.393317] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [ 0.393328] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
    [ 0.393338] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.393417] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.399365] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 0.399367] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.399370] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
    [ 0.399373] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.399511] pci 0000:07:00.0: [144d:a800] type 00 class 0x010601
    [ 0.399581] pci 0000:07:00.0: reg 0x24: [mem 0xd1600000-0xd1601fff]
    [ 0.399611] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.399698] pci 0000:07:00.0: PME# supported from D3hot D3cold
    [ 0.399751] pci 0000:07:00.0: System wakeup disabled by ACPI
    [ 0.406055] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.406061] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
    [ 0.406133] pci 0000:08:00.0: [10ec:5227] type 00 class 0xff0000
    [ 0.406153] pci 0000:08:00.0: reg 0x10: [mem 0xd1500000-0xd1500fff]
    [ 0.406285] pci 0000:08:00.0: supports D1 D2
    [ 0.406286] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.406316] pci 0000:08:00.0: System wakeup disabled by ACPI
    [ 0.412720] pci 0000:00:1c.4: PCI bridge to [bus 08]
    [ 0.412725] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
    [ 0.412836] pci 0000:09:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.412890] pci 0000:09:00.0: reg 0x10: [mem 0xd1400000-0xd1401fff 64bit]
    [ 0.413128] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
    [ 0.413183] pci 0000:09:00.0: System wakeup disabled by ACPI
    [ 0.419415] pci 0000:00:1c.5: PCI bridge to [bus 09]
    [ 0.419420] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
    [ 0.419464] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.420118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420195] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420269] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420377] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.420652] ACPI: Enabled 6 GPEs in block 00 to 3F
    [ 0.420689] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.420760] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.420762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.420764] vgaarb: loaded
    [ 0.420765] vgaarb: bridge control possible 0000:00:02.0
    [ 0.420853] PCI: Using ACPI for IRQ routing
    [ 0.425911] PCI: pci_cache_line_size set to 64 bytes
    [ 0.425949] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
    [ 0.425950] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
    [ 0.425951] e820: reserve RAM buffer [mem 0x78e7d018-0x7bffffff]
    [ 0.425952] e820: reserve RAM buffer [mem 0x78e8e018-0x7bffffff]
    [ 0.425953] e820: reserve RAM buffer [mem 0x9c07f000-0x9fffffff]
    [ 0.425954] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [ 0.425955] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
    [ 0.426019] NetLabel: Initializing
    [ 0.426020] NetLabel: domain hash size = 128
    [ 0.426021] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.426028] NetLabel: unlabeled traffic allowed by default
    [ 0.426041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.426044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.428075] Switched to clocksource hpet
    [ 0.431534] pnp: PnP ACPI init
    [ 0.431620] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.431622] system 00:00: [io 0xffff] has been reserved
    [ 0.431623] system 00:00: [io 0xffff] has been reserved
    [ 0.431624] system 00:00: [io 0xffff] has been reserved
    [ 0.431625] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.431626] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.431628] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.431656] system 00:01: [io 0x0800-0x087f] has been reserved
    [ 0.431658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.431677] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.431703] system 00:03: [io 0x1854-0x1857] has been reserved
    [ 0.431705] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.431750] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
    [ 0.431766] pnp 00:05: Plug and Play ACPI device, IDs SYN1ed8 SYN1e00 SYN0002 PNP0f13 (active)
    [ 0.431848] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.431849] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.431850] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.431852] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.431853] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.431854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.431855] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.431856] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.431857] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.431858] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
    [ 0.431860] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
    [ 0.431861] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.432212] pnp: PnP ACPI: found 7 devices
    [ 0.438072] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
    [ 0.438074] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.438102] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
    [ 0.438103] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [ 0.438105] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.438107] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
    [ 0.438109] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.438112] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1610000-0xd161ffff pref]
    [ 0.438113] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [ 0.438117] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
    [ 0.438123] pci 0000:00:1c.4: PCI bridge to [bus 08]
    [ 0.438127] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
    [ 0.438133] pci 0000:00:1c.5: PCI bridge to [bus 09]
    [ 0.438137] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
    [ 0.438143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.438144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.438145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.438146] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.438147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.438148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.438149] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.438150] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.438151] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.438152] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.438153] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.438154] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.438155] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.438156] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.438157] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.438158] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    [ 0.438159] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
    [ 0.438160] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.438161] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
    [ 0.438161] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
    [ 0.438163] pci_bus 0000:07: resource 1 [mem 0xd1600000-0xd16fffff]
    [ 0.438164] pci_bus 0000:08: resource 1 [mem 0xd1500000-0xd15fffff]
    [ 0.438165] pci_bus 0000:09: resource 1 [mem 0xd1400000-0xd14fffff]
    [ 0.438182] NET: Registered protocol family 2
    [ 0.438329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.438470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.438574] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.438585] TCP: reno registered
    [ 0.438597] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.438635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.438690] NET: Registered protocol family 1
    [ 0.438701] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.440063] PCI: CLS 64 bytes, default 64
    [ 0.440092] Unpacking initramfs...
    [ 0.535471] Freeing initrd memory: 8480K (ffff88007f7d2000 - ffff88008001a000)
    [ 0.535494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.535496] software IO TLB [mem 0x97c0e000-0x9bc0e000] (64MB) mapped at [ffff880097c0e000-ffff88009bc0dfff]
    [ 0.535525] Simple Boot Flag at 0x44 set to 0x1
    [ 0.535703] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.535742] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535747] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535753] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535759] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535764] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535770] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535775] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535781] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
    [ 0.535821] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.535836] Scanning for low memory corruption every 60 seconds
    [ 0.536021] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.536041] Initialise system trusted keyring
    [ 0.536249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.537029] zpool: loaded
    [ 0.537031] zbud: loaded
    [ 0.537161] VFS: Disk quotas dquot_6.5.2
    [ 0.537181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.537256] msgmni has been set to 31953
    [ 0.537287] Key type big_key registered
    [ 0.537431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.537471] io scheduler noop registered
    [ 0.537473] io scheduler deadline registered
    [ 0.537490] io scheduler cfq registered (default)
    [ 0.537616] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
    [ 0.537711] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
    [ 0.537809] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
    [ 0.537906] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
    [ 0.537967] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 0.537968] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.537970] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 0.537981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.537982] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
    [ 0.537986] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.537996] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.537997] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
    [ 0.538000] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.538010] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.538011] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
    [ 0.538014] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.538023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.538035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.538055] efifb: probing for efifb
    [ 0.538070] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8100k, total 8100k
    [ 0.538071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
    [ 0.538071] efifb: scrolling: redraw
    [ 0.538072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.541482] Console: switching to colour frame buffer device 240x67
    [ 0.544794] fb0: EFI VGA frame buffer device
    [ 0.544800] intel_idle: MWAIT substates: 0x42120
    [ 0.544801] intel_idle: v0.4 model 0x3C
    [ 0.544801] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.545023] GHES: HEST is not enabled!
    [ 0.545063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.545351] Linux agpgart interface v0.103
    [ 0.545389] rtc_cmos 00:02: RTC can wake from S4
    [ 0.545490] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.545516] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 0.545524] Intel P-state driver initializing.
    [ 0.545680] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.545994] TCP: cubic registered
    [ 0.546216] NET: Registered protocol family 10
    [ 0.546732] NET: Registered protocol family 17
    [ 0.547560] Loading compiled-in X.509 certificates
    [ 0.547591] registered taskstats version 1
    [ 0.548780] Magic number: 7:609:82
    [ 0.548952] rtc_cmos 00:02: setting system clock to 2015-03-07 15:05:15 UTC (1425740715)
    [ 0.549136] PM: Hibernation image not present or could not be loaded.
    [ 0.551123] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    [ 0.551126] Write protecting the kernel read-only data: 8192k
    [ 0.555482] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
    [ 0.557272] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    [ 0.570421] random: systemd-tmpfile urandom read with 5 bits of entropy available
    [ 0.584356] device-mapper: uevent: version 1.0.3
    [ 0.584470] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
    [ 0.597541] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.602695] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.602710] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.603099] rtsx_pci 0000:08:00.0: irq 30 for MSI/MSI-X
    [ 0.603111] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 30
    [ 0.604239] ACPI: bus type USB registered
    [ 0.604267] usbcore: registered new interface driver usbfs
    [ 0.604273] SCSI subsystem initialized
    [ 0.604279] usbcore: registered new interface driver hub
    [ 0.604330] usbcore: registered new device driver usb
    [ 0.605601] libata version 3.00 loaded.
    [ 0.605678] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.605685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.605779] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.605808] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
    [ 0.606024] hub 1-0:1.0: USB hub found
    [ 0.606063] hub 1-0:1.0: 14 ports detected
    [ 0.609623] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.609626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.609780] hub 2-0:1.0: USB hub found
    [ 0.609795] hub 2-0:1.0: 6 ports detected
    [ 0.610944] ahci 0000:00:1f.2: version 3.0
    [ 0.611066] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
    [ 0.611083] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
    [ 0.611102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.611105] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
    [ 0.611516] scsi host0: ahci
    [ 0.611639] scsi host1: ahci
    [ 0.611727] scsi host2: ahci
    [ 0.611822] scsi host3: ahci
    [ 0.611861] ata1: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b100 irq 32
    [ 0.611863] ata2: DUMMY
    [ 0.611864] ata3: DUMMY
    [ 0.611865] ata4: DUMMY
    [ 0.621966] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.624998] ahci 0000:07:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
    [ 0.625001] ahci 0000:07:00.0: flags: 64bit ncq led clo only pio ccc
    [ 0.625238] scsi host4: ahci
    [ 0.625288] ata5: SATA max UDMA/133 abar m8192@0xd1600000 port 0xd1600100 irq 16
    [ 0.808604] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
    [ 0.808642] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
    [ 0.808673] usb usb2-port2: couldn't allocate usb_device
    [ 0.808738] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
    [ 0.808768] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
    [ 0.808798] usb usb2-port6: couldn't allocate usb_device
    [ 0.932036] ata1: SATA link down (SStatus 0 SControl 300)
    [ 0.952070] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.952367] ata5.00: ATA-9: SAMSUNG MZHPU512HCGL-000H1, UXM62H1Q, max UDMA/133
    [ 0.952370] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.952660] ata5.00: configured for UDMA/133
    [ 0.952785] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 2H1Q PQ: 0 ANSI: 5
    [ 0.955003] sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
    [ 0.955028] sd 4:0:0:0: [sda] Write Protect is off
    [ 0.955030] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.955038] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.956407] sda: sda1 sda2 sda3 sda4 sda5
    [ 0.956825] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 0.968695] usb 1-3: new full-speed USB device number 2 using xhci_hcd
    [ 1.302451] usb 1-4: new high-speed USB device number 3 using xhci_hcd
    [ 1.539371] tsc: Refined TSC clocksource calibration: 2494.224 MHz
    [ 1.646163] usb 1-13: new full-speed USB device number 4 using xhci_hcd
    [ 1.718430] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.821454] usb 1-13: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.972758] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.972914] systemd[1]: Detected architecture 'x86-64'.
    [ 1.973342] systemd[1]: Set hostname to <hp_arch>.
    [ 2.046

    Sorry should have mentioned that. Yeah I tried that and it delays the error message a little bit (about 20 seconds after boot vs instantly). In the end it leads to the exact same error though.

  • Random I/O errors (hdd) and failing to boot, Windows not affected

    I'm experiencing lots of I/O errors when booting and running my Linux partition. I am dual booting Windows 7 (x86_64) and Arch Linux (i686) on a single HDD.
    Im using a Lenovo Ideapad G505s with a Seagate ST1000LM HDD and an SDD currently not in use.
    Partition layout:
    NAME FSTYPE LABEL UUID MOUNTPOINT
    sda
    ├─sda1 ntfs System Reserved D8B40750B4073094
    ├─sda2 ntfs 00EA107FEA107360
    └─sda3 ext3 b753e7d2-6a23-4c20-8fa7-bf281a4a09e4 /
    sr0
    All three are primary partitions. Using ext4 yields the exact same result.
    The problem is easy to reproduce:
    Install Windows 7 to first half of HDD and Arch on the second half
    At first Arch works fine but over the next couple of days increasingly more I/O errors show up and at some point the system fails to boot
    Windows seems to work just fine
    Dmesg output:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:13:35 CEST 2014
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009555dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009555e000-0x0000000095d5efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000095d5f000-0x0000000095dbbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000095dbc000-0x00000000966bbfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000966bc000-0x000000009f8befff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009f8bf000-0x000000009fabefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009fabf000-0x000000009fbbefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009fbbf000-0x000000009fbfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000009fbff000-0x000000009fbfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009fc00000-0x00000000cfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: LENOVO 20255/Lenovo G505s, BIOS 83CN35WW(V2.05) 12/06/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x9fc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
    [ 0.000000] 2 base 00009FBBD000 mask FFFFFFFFF000 uncachable
    [ 0.000000] 3 base 0000FFC00000 mask FFFFFFC00000 write-protect
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000022f000000 aka 8944M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
    [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
    [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
    [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
    [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
    [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
    [ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x7fcaf000-0x7fffffff]
    [ 0.000000] Allocated new RAMDISK: [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] Move RAMDISK from [mem 0x7fcaf000-0x7ffff0d0] to [mem 0x374ad000-0x377fd0d0]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
    [ 0.000000] ACPI: XSDT 0x9FBFE120 000094 (v01 LENOVO CB-01 00000001 01000013)
    [ 0.000000] ACPI: FACP 0x9FBFB000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: DSDT 0x9FBEA000 00CA66 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FACS 0x9FB7C000 000040
    [ 0.000000] ACPI: SLIC 0x9FBFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: UEFI 0x9FBFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: HPET 0x9FBFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: APIC 0x9FBF9000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MCFG 0x9FBF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: ASF! 0x9FBF7000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: BOOT 0x9FBE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDRT 0x9FBE8000 000047 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: WDAT 0x9FBE7000 0001AC (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: FPDT 0x9FBE5000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: MSDM 0x9FBE4000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE3000 000B9C (v01 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: SSDT 0x9FBE1000 001F6E (v02 LENOVO CB-01 00000001 ACPI 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1668MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
    [ 0.000000] HighMem [mem 0x377fe000-0x9fbfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0x9555dfff]
    [ 0.000000] node 0: [mem 0x95d5f000-0x95dbbfff]
    [ 0.000000] node 0: [mem 0x966bc000-0x9f8befff]
    [ 0.000000] node 0: [mem 0x9fbff000-0x9fbfffff]
    [ 0.000000] On node 0 totalpages: 649053
    [ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f60b5020
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 3337 pages used for memmap
    [ 0.000000] HighMem zone: 421825 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f6071000 s33344 r0 d24000 u57344
    [ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 647277
    [ 0.000000] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda3 rw radeon.dpm=1 initrd=../initramfs-linux.img
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] allocated 5234680 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0009fc00)
    [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
    [ 0.000000] Memory: 2558328K/2596212K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 37884K reserved, 1687300K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1630000 - 0xc16be000 ( 568 kB)
    .data : 0xc146853a - 0xc162ec80 (1817 kB)
    .text : 0xc1000000 - 0xc146853a (4513 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
    [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1896.408 MHz processor
    [ 0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 3794.85 BogoMIPS (lpj=6321360)
    [ 0.000032] pid_max: default: 32768 minimum: 301
    [ 0.000037] ACPI: Core revision 20140424
    [ 0.009582] ACPI: All ACPI Tables successfully acquired
    [ 0.015209] Security Framework initialized
    [ 0.015217] Yama: becoming mindful.
    [ 0.015230] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015233] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.015472] Initializing cgroup subsys memory
    [ 0.015491] Initializing cgroup subsys devices
    [ 0.015498] Initializing cgroup subsys freezer
    [ 0.015502] Initializing cgroup subsys net_cls
    [ 0.015507] Initializing cgroup subsys blkio
    [ 0.015528] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.015531] CPU: Physical Processor ID: 0
    [ 0.015532] CPU: Processor Core ID: 0
    [ 0.015536] mce: CPU supports 7 MCE banks
    [ 0.015551] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    tlb_flushall_shift: 6
    [ 0.015678] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
    [ 0.016347] ftrace: allocating 19356 entries in 38 pages
    [ 0.023471] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056821] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)
    [ 0.162662] Performance Events: Fam15h core perfctr, AMD PMU driver.
    [ 0.162668] ... version: 0
    [ 0.162670] ... bit width: 48
    [ 0.162671] ... generic registers: 6
    [ 0.162672] ... value mask: 0000ffffffffffff
    [ 0.162674] ... max period: 00007fffffffffff
    [ 0.162675] ... fixed-purpose events: 0
    [ 0.162676] ... event mask: 000000000000003f
    [ 0.179472] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.186176] CPU 1 irqstacks, hard=f554a000 soft=f554c000
    [ 0.186179] x86: Booting SMP configuration:
    [ 0.186182] .... node #0, CPUs: #1
    [ 0.218942] Initializing CPU#1
    [ 0.218972] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.226174] CPU 2 irqstacks, hard=f5570000 soft=f5572000
    [ 0.226179] #2
    [ 0.258736] Initializing CPU#2
    [ 0.258760] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.266174] CPU 3 irqstacks, hard=f559a000 soft=f559c000
    [ 0.266180] #3
    [ 0.276300] Initializing CPU#3
    [ 0.277268] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
    [ 0.279379] x86: Booted up 1 node, 4 CPUs
    [ 0.279384] smpboot: Total of 4 processors activated (15177.40 BogoMIPS)
    [ 0.280484] devtmpfs: initialized
    [ 0.280769] PM: Registering ACPI NVS region [mem 0x9fabf000-0x9fbbefff] (1048576 bytes)
    [ 0.281973] pinctrl core: initialized pinctrl subsystem
    [ 0.282053] RTC time: 22:28:26, date: 09/21/14
    [ 0.282107] NET: Registered protocol family 16
    [ 0.282225] cpuidle: using governor ladder
    [ 0.282228] cpuidle: using governor menu
    [ 0.282436] ACPI: bus type PCI registered
    [ 0.282439] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.282552] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.282556] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.282558] PCI: Using MMCONFIG for extended config space
    [ 0.282559] PCI: Using configuration type 1 for base access
    [ 0.293370] ACPI: Added _OSI(Module Device)
    [ 0.293374] ACPI: Added _OSI(Processor Device)
    [ 0.293376] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.293378] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.297280] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.301911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.323484] ACPI: Interpreter enabled
    [ 0.323495] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.323501] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.323519] ACPI: (supports S0 S3 S4 S5)
    [ 0.323522] ACPI: Using IOAPIC for interrupt routing
    [ 0.323762] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.324136] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324308] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.324511] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.335527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.335534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.335540] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.335709] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
    [ 0.335713] acpi PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d07ff])
    [ 0.335718] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.335971] PCI host bridge to bus 0000:00
    [ 0.335974] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.335977] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.335985] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.335988] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.335990] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.335992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.335994] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.335996] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.335998] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.336000] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.336001] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.336003] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.336005] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.336007] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.336009] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
    [ 0.336011] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
    [ 0.336013] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
    [ 0.336022] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
    [ 0.336199] pci 0000:00:01.0: [1002:9903] type 00 class 0x030000
    [ 0.336211] pci 0000:00:01.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
    [ 0.336217] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
    [ 0.336224] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
    [ 0.336266] pci 0000:00:01.0: supports D1 D2
    [ 0.336358] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
    [ 0.336369] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
    [ 0.336417] pci 0000:00:01.1: supports D1 D2
    [ 0.336509] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
    [ 0.336560] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.336710] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
    [ 0.336759] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.336812] pci 0000:00:04.0: System wakeup disabled by ACPI
    [ 0.336867] pci 0000:00:05.0: [1022:1415] type 01 class 0x060400
    [ 0.336916] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.336970] pci 0000:00:05.0: System wakeup disabled by ACPI
    [ 0.337102] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
    [ 0.337124] pci 0000:00:10.0: reg 0x10: [mem 0xf0348000-0xf0349fff 64bit]
    [ 0.337221] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
    [ 0.337272] pci 0000:00:10.0: System wakeup disabled by ACPI
    [ 0.337330] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
    [ 0.337347] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
    [ 0.337356] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
    [ 0.337364] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
    [ 0.337373] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
    [ 0.337382] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
    [ 0.337390] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
    [ 0.337516] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
    [ 0.337528] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
    [ 0.337617] pci 0000:00:12.0: System wakeup disabled by ACPI
    [ 0.337703] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
    [ 0.338061] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
    [ 0.340177] pci 0000:00:12.2: supports D1 D2
    [ 0.340179] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.340285] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
    [ 0.340299] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
    [ 0.340392] pci 0000:00:13.0: System wakeup disabled by ACPI
    [ 0.340458] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
    [ 0.340887] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
    [ 0.343004] pci 0000:00:13.2: supports D1 D2
    [ 0.343006] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.343116] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
    [ 0.343284] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
    [ 0.343303] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
    [ 0.343360] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.343454] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
    [ 0.343595] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
    [ 0.343659] pci 0000:00:14.4: System wakeup disabled by ACPI
    [ 0.343722] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
    [ 0.343802] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
    [ 0.343878] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
    [ 0.343955] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
    [ 0.344036] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
    [ 0.344112] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
    [ 0.344337] pci 0000:01:00.0: [1002:6663] type 00 class 0x038000
    [ 0.344355] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.344367] pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf023ffff 64bit]
    [ 0.344375] pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
    [ 0.344388] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
    [ 0.344446] pci 0000:01:00.0: supports D1 D2
    [ 0.344449] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
    [ 0.349478] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.349488] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.349493] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.349498] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.349615] pci 0000:02:00.0: [1969:10a0] type 00 class 0x020000
    [ 0.349642] pci 0000:02:00.0: reg 0x10: [mem 0xf0100000-0xf013ffff 64bit]
    [ 0.349653] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
    [ 0.349752] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.356148] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.356157] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.356162] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.356295] pci 0000:03:00.0: [168c:0036] type 00 class 0x028000
    [ 0.356334] pci 0000:03:00.0: reg 0x10: [mem 0xf0000000-0xf007ffff 64bit]
    [ 0.356393] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.356487] pci 0000:03:00.0: supports D1 D2
    [ 0.356490] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.362836] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.362848] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.363018] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
    [ 0.363032] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.363036] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.363039] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.363041] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [ 0.363044] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [ 0.363047] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [ 0.363049] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.363052] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.363054] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.363057] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.363059] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.363062] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [ 0.363064] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [ 0.363067] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
    [ 0.363069] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode)
    [ 0.363072] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    [ 0.363129] pci_bus 0000:00: on NUMA node 0
    [ 0.366581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366668] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366752] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366834] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366902] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.366953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367062] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.367177] ACPI: Enabled 5 GPEs in block 00 to 1F
    [ 0.367230] ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.367446] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.367456] vgaarb: loaded
    [ 0.367458] vgaarb: bridge control possible 0000:00:01.0
    [ 0.367505] PCI: Using ACPI for IRQ routing
    [ 0.369255] PCI: pci_cache_line_size set to 64 bytes
    [ 0.369352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.369355] e820: reserve RAM buffer [mem 0x9555e000-0x97ffffff]
    [ 0.369357] e820: reserve RAM buffer [mem 0x95dbc000-0x97ffffff]
    [ 0.369358] e820: reserve RAM buffer [mem 0x9f8bf000-0x9fffffff]
    [ 0.369360] e820: reserve RAM buffer [mem 0x9fc00000-0x9fffffff]
    [ 0.369516] NetLabel: Initializing
    [ 0.369518] NetLabel: domain hash size = 128
    [ 0.369519] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.369532] NetLabel: unlabeled traffic allowed by default
    [ 0.369583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.369588] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.371730] Switched to clocksource hpet
    [ 0.378213] pnp: PnP ACPI init
    [ 0.378231] ACPI: bus type PNP registered
    [ 0.378374] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.378377] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.378381] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378616] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.378678] pnp 00:02: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
    [ 0.378740] pnp 00:03: Plug and Play ACPI device, IDs ETD061b ETD0001 PNP0f13 (active)
    [ 0.378836] system 00:04: [io 0x0400-0x04cf] could not be reserved
    [ 0.378839] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.378841] system 00:04: [io 0x04d6] has been reserved
    [ 0.378844] system 00:04: [io 0x0680-0x06ff] has been reserved
    [ 0.378846] system 00:04: [io 0x077a] has been reserved
    [ 0.378848] system 00:04: [io 0x0c00-0x0c01] has been reserved
    [ 0.378850] system 00:04: [io 0x0c14] has been reserved
    [ 0.378853] system 00:04: [io 0x0c50-0x0c52] has been reserved
    [ 0.378855] system 00:04: [io 0x0c6c] has been reserved
    [ 0.378857] system 00:04: [io 0x0c6f] has been reserved
    [ 0.378859] system 00:04: [io 0x0cd0-0x0cdb] has been reserved
    [ 0.378862] system 00:04: [io 0x0840-0x0847] has been reserved
    [ 0.378864] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.378944] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.378947] system 00:05: [mem 0xffc00000-0xffffffff] has been reserved
    [ 0.378950] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.382206] pnp: PnP ACPI: found 6 devices
    [ 0.382211] ACPI: bus type PNP unregistered
    [ 0.420296] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
    [ 0.420325] pci 0000:01:00.0: BAR 6: assigned [mem 0xf0240000-0xf025ffff pref]
    [ 0.420328] pci 0000:00:02.0: PCI bridge to [bus 01]
    [ 0.420331] pci 0000:00:02.0: bridge window [io 0x3000-0x3fff]
    [ 0.420335] pci 0000:00:02.0: bridge window [mem 0xf0200000-0xf02fffff]
    [ 0.420339] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420343] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.420346] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
    [ 0.420349] pci 0000:00:04.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.420355] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0080000-0xf008ffff pref]
    [ 0.420357] pci 0000:00:05.0: PCI bridge to [bus 03]
    [ 0.420361] pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff]
    [ 0.420366] pci 0000:00:14.4: PCI bridge to [bus 04]
    [ 0.420377] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.420380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.420382] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420384] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420386] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420388] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420391] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420393] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420395] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420397] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420399] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420401] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420403] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420405] pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420407] pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420409] pci_bus 0000:00: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420411] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.420413] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
    [ 0.420416] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.420418] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.420420] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.420422] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf00fffff]
    [ 0.420425] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.420427] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.420429] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.420431] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.420433] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.420435] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.420437] pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff]
    [ 0.420439] pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff]
    [ 0.420441] pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff]
    [ 0.420443] pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff]
    [ 0.420445] pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff]
    [ 0.420447] pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff]
    [ 0.420449] pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff]
    [ 0.420451] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff]
    [ 0.420453] pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfed3ffff]
    [ 0.420455] pci_bus 0000:04: resource 19 [mem 0xfed45000-0xffffffff]
    [ 0.420484] NET: Registered protocol family 2
    [ 0.420674] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.420689] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.420717] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.420733] TCP: reno registered
    [ 0.420736] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420742] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.420798] NET: Registered protocol family 1
    [ 0.420831] pci 0000:00:01.0: Boot video device
    [ 1.038734] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 1.038759] PCI: CLS 64 bytes, default 64
    [ 1.038818] Unpacking initramfs...
    [ 1.112669] Freeing initrd memory: 3396K (f74ad000 - f77fe000)
    [ 1.112753] Simple Boot Flag at 0x44 set to 0x1
    [ 1.113077] perf: AMD NB counters detected
    [ 1.113122] LVT offset 0 assigned for vector 0x400
    [ 1.113138] perf: AMD IBS detected (0x000000ff)
    [ 1.113149] apm: BIOS not found.
    [ 1.113200] Scanning for low memory corruption every 60 seconds
    [ 1.113689] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 1.114240] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 1.116388] zbud: loaded
    [ 1.116669] VFS: Disk quotas dquot_6.5.2
    [ 1.116720] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 1.116962] msgmni has been set to 1707
    [ 1.117034] Key type big_key registered
    [ 1.117325] bounce: pool size: 64 pages
    [ 1.117370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 1.117448] io scheduler noop registered
    [ 1.117452] io scheduler deadline registered
    [ 1.117524] io scheduler cfq registered (default)
    [ 1.118017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 1.118037] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 1.118114] GHES: HEST is not enabled!
    [ 1.118129] isapnp: Scanning for PnP cards...
    [ 1.513691] isapnp: No Plug & Play device found
    [ 1.513876] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.514746] rtc_cmos 00:01: RTC can wake from S4
    [ 1.515007] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 1.515032] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
    [ 1.515076] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.515246] TCP: cubic registered
    [ 1.515386] NET: Registered protocol family 10
    [ 1.515657] NET: Registered protocol family 17
    [ 1.516096] Using IPI No-Shortcut mode
    [ 1.516269] registered taskstats version 1
    [ 1.516866] Magic number: 14:856:502
    [ 1.516927] rtc_cmos 00:01: setting system clock to 2014-09-21 22:28:27 UTC (1411338507)
    [ 1.517032] PM: Hibernation image not present or could not be loaded.
    [ 1.517281] Freeing unused kernel memory: 568K (c1630000 - c16be000)
    [ 1.517350] Write protecting the kernel text: 4516k
    [ 1.517388] Write protecting the kernel read-only data: 1332k
    [ 1.527560] random: systemd-tmpfile urandom read with 0 bits of entropy available
    [ 1.529660] systemd-udevd[57]: starting version 216
    [ 1.549349] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSSG] at 0x60,0x64 irq 1,12
    [ 1.568048] ACPI: bus type USB registered
    [ 1.568103] usbcore: registered new interface driver usbfs
    [ 1.568141] usbcore: registered new interface driver hub
    [ 1.568537] SCSI subsystem initialized
    [ 1.574578] usbcore: registered new device driver usb
    [ 1.593572] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.593667] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.593746] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.594746] ehci-pci: EHCI PCI platform driver
    [ 1.594935] QUIRK: Enable AMD PLL fix
    [ 1.594970] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 1.594980] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 1.594989] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.595002] ehci-pci 0000:00:12.2: debug port 1
    [ 1.595055] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
    [ 1.595121] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.595830] ohci-pci: OHCI PCI platform driver
    [ 1.601895] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 1.602284] libata version 3.00 loaded.
    [ 1.602306] hub 1-0:1.0: USB hub found
    [ 1.602325] hub 1-0:1.0: 5 ports detected
    [ 1.602883] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 1.602893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 1.602899] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 1.602912] ehci-pci 0000:00:13.2: debug port 1
    [ 1.602945] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
    [ 1.612011] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 1.612308] hub 2-0:1.0: USB hub found
    [ 1.612317] hub 2-0:1.0: 5 ports detected
    [ 1.612814] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.612828] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
    [ 1.613042] xhci_hcd 0000:00:10.0: irq 40 for MSI/MSI-X
    [ 1.613048] xhci_hcd 0000:00:10.0: irq 41 for MSI/MSI-X
    [ 1.613052] xhci_hcd 0000:00:10.0: irq 42 for MSI/MSI-X
    [ 1.613056] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
    [ 1.613060] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
    [ 1.613374] hub 3-0:1.0: USB hub found
    [ 1.613388] hub 3-0:1.0: 2 ports detected
    [ 1.613609] xhci_hcd 0000:00:10.0: xHCI Host Controller
    [ 1.613614] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
    [ 1.616754] hub 4-0:1.0: USB hub found
    [ 1.616768] hub 4-0:1.0: 2 ports detected
    [ 1.617093] ohci-pci 0000:00:12.0: OHCI PCI host controller
    [ 1.617107] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
    [ 1.617152] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
    [ 1.645460] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.673072] hub 5-0:1.0: USB hub found
    [ 1.673098] hub 5-0:1.0: 5 ports detected
    [ 1.673547] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 1.673554] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
    [ 1.673585] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
    [ 1.729803] hub 6-0:1.0: USB hub found
    [ 1.729831] hub 6-0:1.0: 5 ports detected
    [ 1.730166] ahci 0000:00:11.0: version 3.0
    [ 1.730351] ahci 0000:00:11.0: irq 45 for MSI/MSI-X
    [ 1.730404] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
    [ 1.730409] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.731131] scsi0 : ahci
    [ 1.731321] scsi1 : ahci
    [ 1.731403] ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 45
    [ 1.731407] ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 45
    [ 1.962152] usb 1-4: new high-speed USB device number 3 using ehci-pci
    [ 2.115336] tsc: Refined TSC clocksource calibration: 1896.456 MHz
    [ 2.215395] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.215424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 2.216948] ata2.00: ATAPI: MATSHITADVD-RAM UJ8C2, 1.00, max UDMA/133
    [ 2.218438] ata2.00: configured for UDMA/133
    [ 2.274381] ata1.00: ATA-9: ST1000LM014-1EJ164, LVD3, max UDMA/133
    [ 2.274386] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 2.318651] ata1.00: configured for UDMA/133
    [ 2.318844] scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 LVD3 PQ: 0 ANSI: 5
    [ 2.320735] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 1.00 PQ: 0 ANSI: 5
    [ 2.337991] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 2.337996] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 2.338079] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.338085] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.338151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.338885] sda: sda1 sda2 sda3
    [ 2.339411] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.348995] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.348999] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.349240] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 2.395434] usb 3-1: new low-speed USB device number 2 using xhci_hcd
    [ 2.438944] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 2.438989] ata1.00: irq_stat 0x40000008
    [ 2.439030] ata1.00: failed command: READ FPDMA QUEUED
    [ 2.439074] ata1.00: cmd 60/08:38:18:08:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:18:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 2.439127] ata1.00: status: { DRDY ERR }
    [ 2.439166] ata1.00: error: { ICRC ABRT }
    [ 2.439207] ata1: hard resetting link
    [ 2.555934] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.555943] usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.559635] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.586950] usbcore: registered new interface driver usbhid
    [ 2.586953] usbhid: USB HID core driver
    [ 2.588065] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:045E:0780.0001/input/input2
    [ 2.588153] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input0
    [ 2.594030] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.1/0003:045E:0780.0002/input/input3
    [ 2.594150] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:10.0-1/input1
    [ 2.662213] usb 2-2: new high-speed USB device number 2 using ehci-pci
    [ 2.915446] usb 5-1: new low-speed USB device number 2 using ohci-pci
    [ 2.925441] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.039928] ata1.00: configured for UDMA/133
    [ 3.039955] ata1: EH complete
    [ 3.081259] input: USB Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0003/input/input4
    [ 3.081368] hid-generic 0003:05E3:1205.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:12.0-1/input0
    [ 3.089081] ata1.00: exception Emask 0x0 SAct 0x40000 SErr 0x0 action 0x6
    [ 3.089128] ata1.00: irq_stat 0x40000008
    [ 3.089168] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.089212] ata1.00: cmd 60/08:90:78:28:03/00:00:00:00:00/40 tag 18 ncq 4096 in
    res 41/84:08:7c:28:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.089265] ata1.00: status: { DRDY ERR }
    [ 3.089304] ata1.00: error: { ICRC ABRT }
    [ 3.089346] ata1: hard resetting link
    [ 3.115583] Switched to clocksource tsc
    [ 3.575598] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 3.694602] ata1.00: configured for UDMA/133
    [ 3.694621] ata1: EH complete
    [ 3.809120] ata1.00: exception Emask 0x0 SAct 0x1e00 SErr 0x0 action 0x6
    [ 3.809168] ata1.00: irq_stat 0x40000008
    [ 3.809208] ata1.00: failed command: READ FPDMA QUEUED
    [ 3.809251] ata1.00: cmd 60/08:48:10:08:00/00:00:00:00:00/40 tag 9 ncq 4096 in
    res 41/84:08:10:08:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 3.809305] ata1.00: status: { DRDY ERR }
    [ 3.809343] ata1.00: error: { ICRC ABRT }
    [ 3.809385] ata1: hard resetting link
    [ 4.295566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4.404835] ata1.00: configured for UDMA/133
    [ 4.404858] ata1: EH complete
    [ 4.453715] ata1.00: exception Emask 0x0 SAct 0x1fe000 SErr 0x0 action 0x0
    [ 4.453760] ata1.00: irq_stat 0x40000008
    [ 4.453799] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.453842] ata1.00: cmd 60/80:68:80:08:00/01:00:00:00:00/40 tag 13 ncq 196608 in
    res 41/40:80:b8:09:00/00:01:00:00:00/00 Emask 0x409 (media error) <F>
    [ 4.453894] ata1.00: status: { DRDY ERR }
    [ 4.453932] ata1.00: error: { UNC }
    [ 4.637639] ata1.00: configured for UDMA/133
    [ 4.637688] sd 0:0:0:0: [sda] Unhandled sense code
    [ 4.637691] sd 0:0:0:0: [sda]
    [ 4.637693] Result: hostbyte=0x00 driverbyte=0x08
    [ 4.637695] sd 0:0:0:0: [sda]
    [ 4.637697] Sense Key : 0x3 [current] [descriptor]
    [ 4.637700] Descriptor sense data with sense descriptors (in hex):
    [ 4.637702] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 4.637710] 00 00 09 b8
    [ 4.637714] sd 0:0:0:0: [sda]
    [ 4.637716] ASC=0x11 ASCQ=0x4
    [ 4.637718] sd 0:0:0:0: [sda] CDB:
    [ 4.637719] cdb[0]=0x28: 28 00 00 00 08 80 00 01 80 00
    [ 4.637727] end_request: I/O error, dev sda, sector 2488
    [ 4.637786] Buffer I/O error on device sda1, logical block 55
    [ 4.637826] Buffer I/O error on device sda1, logical block 56
    [ 4.637866] Buffer I/O error on device sda1, logical block 57
    [ 4.637905] Buffer I/O error on device sda1, logical block 58
    [ 4.637945] Buffer I/O error on device sda1, logical block 59
    [ 4.637984] Buffer I/O error on device sda1, logical block 60
    [ 4.638024] Buffer I/O error on device sda1, logical block 61
    [ 4.638063] Buffer I/O error on device sda1, logical block 62
    [ 4.638105] Buffer I/O error on device sda1, logical block 63
    [ 4.638188] ata1: EH complete
    [ 4.879313] ata1: limiting SATA link speed to 3.0 Gbps
    [ 4.879320] ata1.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x6
    [ 4.879364] ata1.00: irq_stat 0x40000008
    [ 4.879404] ata1.00: failed command: READ FPDMA QUEUED
    [ 4.879448] ata1.00: cmd 60/08:70:50:2b:03/00:00:00:00:00/40 tag 14 ncq 4096 in
    res 41/84:08:50:2b:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 4.879502] ata1.00: status: { DRDY ERR }
    [ 4.879540] ata1.00: error: { ICRC ABRT }
    [ 4.879583] ata1: hard resetting link
    [ 5.365653] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 5.469816] ata1.00: configured for UDMA/133
    [ 5.469845] ata1: EH complete
    [ 5.582799] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6
    [ 5.582859] ata1.00: irq_stat 0x40000008
    [ 5.582900] ata1.00: failed command: READ FPDMA QUEUED
    [ 5.582943] ata1.00: cmd 60/08:38:18:0b:00/00:00:00:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:19:0b:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 5.582997] ata1.00: status: { DRDY ERR }
    [ 5.583036] ata1.00: error: { ICRC ABRT }
    [ 5.583078] ata1: hard resetting link
    [ 6.069015] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.191135] ata1.00: configured for UDMA/133
    [ 6.191166] ata1: EH complete
    [ 6.256026] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6
    [ 6.256073] ata1.00: irq_stat 0x40000008
    [ 6.256114] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.256158] ata1.00: cmd 60/08:78:00:38:03/00:00:00:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:02:38:03/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.256212] ata1.00: status: { DRDY ERR }
    [ 6.256250] ata1.00: error: { ICRC ABRT }
    [ 6.256292] ata1: hard resetting link
    [ 6.742436] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 6.845773] ata1.00: configured for UDMA/133
    [ 6.845806] ata1: EH complete
    [ 6.986177] ata1.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6
    [ 6.986223] ata1.00: irq_stat 0x40000008
    [ 6.986264] ata1.00: failed command: READ FPDMA QUEUED
    [ 6.986308] ata1.00: cmd 60/08:98:b0:f8:b5/00:00:58:00:00/40 tag 19 ncq 4096 in
    res 41/84:08:b0:f8:b5/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 6.986360] ata1.00: status: { DRDY ERR }
    [ 6.986399] ata1.00: error: { ICRC ABRT }
    [ 6.986440] ata1: hard resetting link
    [ 7.472592] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    [ 7.578097] ata1.00: configured for UDMA/133
    [ 7.578124] ata1: EH complete
    [ 7.587216] random: nonblocking pool is initialized
    [ 7.602800] ata1: limiting SATA link speed to 1.5 Gbps
    [ 7.602806] ata1.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6
    [ 7.602850] ata1.00: irq_stat 0x40000008
    [ 7.602889] ata1.00: failed command: READ FPDMA QUEUED
    [ 7.602931] ata1.00: cmd 60/08:b8:c8:58:b6/00:00:58:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:cc:58:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 7.602982] ata1.00: status: { DRDY ERR }
    [ 7.603020] ata1.00: error: { ICRC ABRT }
    [ 7.603061] ata1: hard resetting link
    [ 8.089174] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.188490] ata1.00: configured for UDMA/133
    [ 8.188517] ata1: EH complete
    [ 8.216300] ata1.00: exception Emask 0x0 SAct 0x2000000 SErr 0x0 action 0x6
    [ 8.216361] ata1.00: irq_stat 0x40000008
    [ 8.216402] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.216446] ata1.00: cmd 60/08:c8:d0:78:b6/00:00:58:00:00/40 tag 25 ncq 4096 in
    res 41/84:08:d0:78:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.216500] ata1.00: status: { DRDY ERR }
    [ 8.216539] ata1.00: error: { ICRC ABRT }
    [ 8.216581] ata1: hard resetting link
    [ 8.702603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 8.809726] ata1.00: configured for UDMA/133
    [ 8.809758] ata1: EH complete
    [ 8.836250] ata1.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6
    [ 8.836295] ata1.00: irq_stat 0x40000008
    [ 8.836335] ata1.00: failed command: READ FPDMA QUEUED
    [ 8.836377] ata1.00: cmd 60/08:d8:d8:98:b6/00:00:58:00:00/40 tag 27 ncq 4096 in
    res 41/84:08:d8:98:b6/00:00:58:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 8.836429] ata1.00: status: { DRDY ERR }
    [ 8.836467] ata1.00: error: { ICRC ABRT }
    [ 8.836507] ata1: hard resetting link
    [ 9.322654] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 9.430994] ata1.00: configured for UDMA/133
    [ 9.431018] ata1: EH complete
    [ 9.664088] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [ 9.686362] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.837482] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 9.837542] ata1.00: irq_stat 0x40000008
    [ 9.837583] ata1.00: failed command: READ FPDMA QUEUED
    [ 9.837626] ata1.00: cmd 60/08:28:20:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:20:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 9.837680] ata1.00: status: { DRDY ERR }
    [ 9.837719] ata1.00: error: { ICRC ABRT }
    [ 9.837761] ata1: hard resetting link
    [ 10.322740] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 10.515900] ata1.00: configured for UDMA/133
    [ 10.515972] sd 0:0:0:0: [sda]
    [ 10.515975] Result: hostbyte=0x00 driverbyte=0x08
    [ 10.515978] sd 0:0:0:0: [sda]
    [ 10.515979] Sense Key : 0xb [current] [descriptor]
    [ 10.515983] Descriptor sense data with sense descriptors (in hex):
    [ 10.515984] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 10.515992] 5e 89 08 20
    [ 10.515997] sd 0:0:0:0: [sda]
    [ 10.515998] ASC=0x47 ASCQ=0x0
    [ 10.516001] sd 0:0:0:0: [sda] CDB:
    [ 10.516002] cdb[0]=0x28: 28 00 5e 89 08 20 00 00 08 00
    [ 10.516010] end_request: I/O error, dev sda, sector 1586038816
    [ 10.516148] ata1: EH complete
    [ 10.529733] ata1.00: limiting speed to UDMA/100:PIO4
    [ 10.529740] ata1.00: exception Emask 0x0 SAct 0x7fffff1f SErr 0x0 action 0x6
    [ 10.529786] ata1.00: irq_stat 0x40000008
    [ 10.529826] ata1.00: failed command: READ FPDMA QUEUED
    [ 10.529870] ata1.00: cmd 60/08:40:d0:08:89/00:00:5e:00:00/40 tag 8 ncq 4096 in
    res 41/84:08:d4:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 10.529924] ata1.00: status: { DRDY ERR }
    [ 10.529962] ata1.00: error: { ICRC ABRT }
    [ 10.530004] ata1: hard resetting link
    [ 11.016129] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.139673] ata1.00: configured for UDMA/100
    [ 11.139723] sd 0:0:0:0: [sda]
    [ 11.139725] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.139728] sd 0:0:0:0: [sda]
    [ 11.139730] Sense Key : 0xb [current] [descriptor]
    [ 11.139733] Descriptor sense data with sense descriptors (in hex):
    [ 11.139735] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.139743] 5e 89 08 d4
    [ 11.139747] sd 0:0:0:0: [sda]
    [ 11.139749] ASC=0x47 ASCQ=0x0
    [ 11.139751] sd 0:0:0:0: [sda] CDB:
    [ 11.139753] cdb[0]=0x28: 28 00 5e 89 08 d0 00 00 08 00
    [ 11.139761] end_request: I/O error, dev sda, sector 1586038992
    [ 11.139889] ata1: EH complete
    [ 11.153122] ata1.00: exception Emask 0x0 SAct 0x7fffffc1 SErr 0x0 action 0x6
    [ 11.153169] ata1.00: irq_stat 0x40000008
    [ 11.153210] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.153253] ata1.00: cmd 60/08:30:28:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:28:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.153306] ata1.00: status: { DRDY ERR }
    [ 11.153345] ata1.00: error: { ICRC ABRT }
    [ 11.153386] ata1: hard resetting link
    [ 11.639485] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 11.749884] ata1.00: configured for UDMA/100
    [ 11.749918] sd 0:0:0:0: [sda]
    [ 11.749920] Result: hostbyte=0x00 driverbyte=0x08
    [ 11.749923] sd 0:0:0:0: [sda]
    [ 11.749925] Sense Key : 0xb [current] [descriptor]
    [ 11.749928] Descriptor sense data with sense descriptors (in hex):
    [ 11.749930] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 11.749938] 5e 89 08 28
    [ 11.749942] sd 0:0:0:0: [sda]
    [ 11.749944] ASC=0x47 ASCQ=0x0
    [ 11.749946] sd 0:0:0:0: [sda] CDB:
    [ 11.749948] cdb[0]=0x28: 28 00 5e 89 08 28 00 00 08 00
    [ 11.749956] end_request: I/O error, dev sda, sector 1586038824
    [ 11.750093] ata1: EH complete
    [ 11.763159] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 11.763206] ata1.00: irq_stat 0x40000008
    [ 11.763247] ata1.00: failed command: READ FPDMA QUEUED
    [ 11.763290] ata1.00: cmd 60/08:28:c8:08:89/00:00:5e:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:c8:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 11.763343] ata1.00: status: { DRDY ERR }
    [ 11.763382] ata1.00: error: { ICRC ABRT }
    [ 11.763424] ata1: hard resetting link
    [ 12.249523] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.360321] ata1.00: configured for UDMA/100
    [ 12.360370] sd 0:0:0:0: [sda]
    [ 12.360372] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.360375] sd 0:0:0:0: [sda]
    [ 12.360377] Sense Key : 0xb [current] [descriptor]
    [ 12.360380] Descriptor sense data with sense descriptors (in hex):
    [ 12.360381] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.360390] 5e 89 08 c8
    [ 12.360394] sd 0:0:0:0: [sda]
    [ 12.360395] ASC=0x47 ASCQ=0x0
    [ 12.360398] sd 0:0:0:0: [sda] CDB:
    [ 12.360399] cdb[0]=0x28: 28 00 5e 89 08 c8 00 00 08 00
    [ 12.360407] end_request: I/O error, dev sda, sector 1586038984
    [ 12.360543] ata1: EH complete
    [ 12.369958] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.370005] ata1.00: irq_stat 0x40000008
    [ 12.370045] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.370090] ata1.00: cmd 60/08:28:38:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:3a:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.370143] ata1.00: status: { DRDY ERR }
    [ 12.370182] ata1.00: error: { ICRC ABRT }
    [ 12.370224] ata1: hard resetting link
    [ 12.856285] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 12.959379] ata1.00: configured for UDMA/100
    [ 12.959426] sd 0:0:0:0: [sda]
    [ 12.959429] Result: hostbyte=0x00 driverbyte=0x08
    [ 12.959432] sd 0:0:0:0: [sda]
    [ 12.959433] Sense Key : 0xb [current] [descriptor]
    [ 12.959437] Descriptor sense data with sense descriptors (in hex):
    [ 12.959438] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 12.959447] 63 89 08 3a
    [ 12.959462] sd 0:0:0:0: [sda]
    [ 12.959464] ASC=0x47 ASCQ=0x0
    [ 12.959466] sd 0:0:0:0: [sda] CDB:
    [ 12.959468] cdb[0]=0x28: 28 00 63 89 08 38 00 00 08 00
    [ 12.959476] end_request: I/O error, dev sda, sector 1669924920
    [ 12.959616] ata1: EH complete
    [ 12.973195] ata1.00: limiting speed to UDMA/33:PIO4
    [ 12.973202] ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6
    [ 12.973247] ata1.00: irq_stat 0x40000008
    [ 12.973287] ata1.00: failed command: READ FPDMA QUEUED
    [ 12.973331] ata1.00: cmd 60/08:30:c0:08:89/00:00:5e:00:00/40 tag 6 ncq 4096 in
    res 41/84:08:c0:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 12.973384] ata1.00: status: { DRDY ERR }
    [ 12.973423] ata1.00: error: { ICRC ABRT }
    [ 12.973464] ata1: hard resetting link
    [ 13.459735] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 13.569691] ata1.00: configured for UDMA/33
    [ 13.569750] sd 0:0:0:0: [sda]
    [ 13.569753] Result: hostbyte=0x00 driverbyte=0x08
    [ 13.569755] sd 0:0:0:0: [sda]
    [ 13.569757] Sense Key : 0xb [current] [descriptor]
    [ 13.569761] Descriptor sense data with sense descriptors (in hex):
    [ 13.569763] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 13.569771] 5e 89 08 c0
    [ 13.569775] sd 0:0:0:0: [sda]
    [ 13.569777] ASC=0x47 ASCQ=0x0
    [ 13.569779] sd 0:0:0:0: [sda] CDB:
    [ 13.569781] cdb[0]=0x28: 28 00 5e 89 08 c0 00 00 08 00
    [ 13.569789] end_request: I/O error, dev sda, sector 1586038976
    [ 13.569933] ata1: EH complete
    [ 13.583315] ata1.00: exception Emask 0x0 SAct 0x7fffff9f SErr 0x0 action 0x6
    [ 13.583360] ata1.00: irq_stat 0x40000008
    [ 13.583399] ata1.00: failed command: READ FPDMA QUEUED
    [ 13.583441] ata1.00: cmd 60/08:38:30:08:89/00:00:63:00:00/40 tag 7 ncq 4096 in
    res 41/84:08:30:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 13.585478] ata1.00: status: { DRDY ERR }
    [ 13.585516] ata1.00: error: { ICRC ABRT }
    [ 13.585558] ata1: hard resetting link
    [ 14.069688] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.180020] ata1.00: configured for UDMA/33
    [ 14.180069] sd 0:0:0:0: [sda]
    [ 14.180072] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.180074] sd 0:0:0:0: [sda]
    [ 14.180076] Sense Key : 0xb [current] [descriptor]
    [ 14.180079] Descriptor sense data with sense descriptors (in hex):
    [ 14.180081] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.180089] 63 89 08 30
    [ 14.180094] sd 0:0:0:0: [sda]
    [ 14.180095] ASC=0x47 ASCQ=0x0
    [ 14.180098] sd 0:0:0:0: [sda] CDB:
    [ 14.180099] cdb[0]=0x28: 28 00 63 89 08 30 00 00 08 00
    [ 14.180108] end_request: I/O error, dev sda, sector 1669924912
    [ 14.180245] ata1: EH complete
    [ 14.190091] ata1.00: exception Emask 0x0 SAct 0x7fffffe3 SErr 0x0 action 0x6
    [ 14.190153] ata1.00: irq_stat 0x40000008
    [ 14.190193] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.190237] ata1.00: cmd 60/a8:28:70:08:89/00:00:63:00:00/40 tag 5 ncq 86016 in
    res 41/84:a8:80:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.190290] ata1.00: status: { DRDY ERR }
    [ 14.190328] ata1.00: error: { ICRC ABRT }
    [ 14.190371] ata1: hard resetting link
    [ 14.676439] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 14.779168] ata1.00: configured for UDMA/33
    [ 14.779214] sd 0:0:0:0: [sda]
    [ 14.779216] Result: hostbyte=0x00 driverbyte=0x08
    [ 14.779218] sd 0:0:0:0: [sda]
    [ 14.779220] Sense Key : 0xb [current] [descriptor]
    [ 14.779223] Descriptor sense data with sense descriptors (in hex):
    [ 14.779225] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 14.779233] 63 89 08 80
    [ 14.779237] sd 0:0:0:0: [sda]
    [ 14.779239] ASC=0x47 ASCQ=0x0
    [ 14.779241] sd 0:0:0:0: [sda] CDB:
    [ 14.779243] cdb[0]=0x28: 28 00 63 89 08 70 00 00 a8 00
    [ 14.779251] end_request: I/O error, dev sda, sector 1669924976
    [ 14.779391] ata1: EH complete
    [ 14.793467] ata1.00: exception Emask 0x0 SAct 0x3fffffe0 SErr 0x0 action 0x6
    [ 14.793513] ata1.00: irq_stat 0x40000008
    [ 14.793554] ata1.00: failed command: READ FPDMA QUEUED
    [ 14.793597] ata1.00: cmd 60/08:28:28:08:89/00:00:63:00:00/40 tag 5 ncq 4096 in
    res 41/84:08:28:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 14.793651] ata1.00: status: { DRDY ERR }
    [ 14.793690] ata1.00: error: { ICRC ABRT }
    [ 14.793733] ata1: hard resetting link
    [ 15.279789] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.378218] ata1.00: configured for UDMA/33
    [ 15.378240] sd 0:0:0:0: [sda]
    [ 15.378243] Result: hostbyte=0x00 driverbyte=0x08
    [ 15.378245] sd 0:0:0:0: [sda]
    [ 15.378247] Sense Key : 0xb [current] [descriptor]
    [ 15.378250] Descriptor sense data with sense descriptors (in hex):
    [ 15.378252] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 15.378260] 63 89 08 28
    [ 15.378264] sd 0:0:0:0: [sda]
    [ 15.378266] ASC=0x47 ASCQ=0x0
    [ 15.378268] sd 0:0:0:0: [sda] CDB:
    [ 15.378269] cdb[0]=0x28: 28 00 63 89 08 28 00 00 08 00
    [ 15.378277] end_request: I/O error, dev sda, sector 1669924904
    [ 15.378427] ata1: EH complete
    [ 15.390101] ata1.00: exception Emask 0x0 SAct 0x7fffff SErr 0x0 action 0x6
    [ 15.390148] ata1.00: irq_stat 0x40000008
    [ 15.390188] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.390232] ata1.00: cmd 60/08:00:10:08:89/00:00:63:00:00/40 tag 0 ncq 4096 in
    res 41/84:08:10:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.390285] ata1.00: status: { DRDY ERR }
    [ 15.390324] ata1.00: error: { ICRC ABRT }
    [ 15.390366] ata1: hard resetting link
    [ 15.876541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 15.977410] ata1.00: configured for UDMA/33
    [ 15.977500] ata1: EH complete
    [ 15.986870] ata1.00: exception Emask 0x0 SAct 0x7f807fff SErr 0x0 action 0x6
    [ 15.986916] ata1.00: irq_stat 0x40000008
    [ 15.986957] ata1.00: failed command: READ FPDMA QUEUED
    [ 15.987000] ata1.00: cmd 60/08:b8:20:08:89/00:00:63:00:00/40 tag 23 ncq 4096 in
    res 41/84:08:20:08:89/00:00:63:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 15.987054] ata1.00: status: { DRDY ERR }
    [ 15.987093] ata1.00: error: { ICRC ABRT }
    [ 15.987135] ata1: hard resetting link
    [ 16.473350] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 16.576437] ata1.00: configured for UDMA/33
    [ 16.576509] sd 0:0:0:0: [sda]
    [ 16.576511] Result: hostbyte=0x00 driverbyte=0x08
    [ 16.576514] sd 0:0:0:0: [sda]
    [ 16.576516] Sense Key : 0xb [current] [descriptor]
    [ 16.576519] Descriptor sense data with sense descriptors (in hex):
    [ 16.576520] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 16.576529] 63 89 08 20
    [ 16.576533] sd 0:0:0:0: [sda]
    [ 16.576534] ASC=0x47 ASCQ=0x0
    [ 16.576537] sd 0:0:0:0: [sda] CDB:
    [ 16.576538] cdb[0]=0x28: 28 00 63 89 08 20 00 00 08 00
    [ 16.576546] end_request: I/O error, dev sda, sector 1669924896
    [ 16.576642] ata1: EH complete
    [ 16.586801] ata1.00: exception Emask 0x0 SAct 0x7fff803f SErr 0x0 action 0x6
    [ 16.586847] ata1.00: irq_stat 0x40000008
    [ 16.586886] ata1.00: failed command: READ FPDMA QUEUED
    [ 16.586928] ata1.00: cmd 60/08:78:50:08:89/00:00:5e:00:00/40 tag 15 ncq 4096 in
    res 41/84:08:54:08:89/00:00:5e:00:00/00 Emask 0x410 (ATA bus error) <F>
    [ 16.586980] ata1.00: status: { DRDY ERR }
    [ 16.587018] ata1.00: error: { ICRC ABRT }
    [ 16.587058] ata1: hard resetting link
    [ 17.073307] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 17.175907] ata1.00: configured for UDMA/33
    [ 17.175963] sd 0:0:0:0: [sda]
    [ 17.175965] Result: hostbyte=0x00 driverbyte=0x08
    [ 17.175968] sd 0:0:0:0: [sda]
    [ 17.175970] Sense Key : 0xb [current] [descriptor]
    [ 17.175973] Descriptor sense data with sense descriptors (in hex):
    [ 17.175974] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 17.175983] 5e 89 08 54
    [ 17.175987] sd

    I have only Arch installed, 64 bit, UEFI boot.
    The things got worse for me. Today I barely managed to boot the laptop. It was throwing a lot of errors at me:
    Sep 24 06:13:59 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:13:59 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:13:59 kernel: ata6.00: cmd 60/a8:00:40:0e:00/00:00:00:00:00/40 tag 0 ncq 86016 in
    res 41/84:a8:87:0e:00/00:00:00:00:00/00 Emask 0x410 (ATA bus error) <F>
    Sep 24 06:13:59 kernel: ata6.00: status: { DRDY ERR }
    Sep 24 06:13:59 kernel: ata6.00: error: { ICRC ABRT }
    Sep 24 06:13:59 kernel: ata6: hard resetting link
    Sep 24 06:13:59 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:13:59 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:13:59 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:13:59 kernel: 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:13:59 kernel: 00 00 0e 87
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:13:59 kernel: ASC=0x47 ASCQ=0x0
    Sep 24 06:13:59 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:13:59 kernel: cdb[0]=0x28: 28 00 00 00 0e 40 00 00 a8 00
    Sep 24 06:13:59 kernel: end_request: I/O error, dev sda, sector 3648
    Sep 24 06:13:59 kernel: ata6: EH complete
    Sep 24 06:14:30 kernel: ata6.00: exception Emask 0x1 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
    Sep 24 06:14:30 kernel: ata6.00: irq_stat 0x40000008
    Sep 24 06:14:30 kernel: ata6.00: failed command: WRITE FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 61/08:00:00:08:24/00:00:41:00:00/40 tag 0 ncq 4096 out
    res 40/00:a8:87:0e:00/00:00:00:00:00/00 Emask 0x5 (timeout)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/a8:08:60:0f:00/00:00:00:00:00/40 tag 1 ncq 86016 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/14:10:08:10:00/00:00:00:00:00/40 tag 2 ncq 10240 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:18:24:0f:00/00:00:00:00:00/40 tag 3 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:20:25:0f:00/00:00:00:00:00/40 tag 4 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:28:26:0f:00/00:00:00:00:00/40 tag 5 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6.00: failed command: READ FPDMA QUEUED
    Sep 24 06:14:30 kernel: ata6.00: cmd 60/01:30:27:0f:00/00:00:00:00:00/40 tag 6 ncq 512 in
    res 40/00:10:08:10:00/00:00:00:00:00/40 Emask 0x1 (device error)
    Sep 24 06:14:30 kernel: ata6.00: status: { DRDY }
    Sep 24 06:14:30 kernel: ata6: hard resetting link
    Sep 24 06:14:30 kernel: ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    Sep 24 06:14:30 kernel: ata6.00: configured for UDMA/133
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: ASC=0x0 ASCQ=0x0
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda] CDB:
    Sep 24 06:14:30 kernel: cdb[0]=0x28: 28 00 00 00 0f 60 00 00 a8 00
    Sep 24 06:14:30 kernel: end_request: I/O error, dev sda, sector 3936
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Result: hostbyte=0x00 driverbyte=0x08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    Sep 24 06:14:30 kernel: Sense Key : 0xb [current] [descriptor]
    Sep 24 06:14:30 kernel: Descriptor sense data with sense descriptors (in hex):
    Sep 24 06:14:30 kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    Sep 24 06:14:30 kernel: 00 00 10 08
    Sep 24 06:14:30 kernel: sd 5:0:0:0: [sda]
    and so on... It somehow booted, but now journalctl says:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
    while the Error hasn't occured yet.
    I think I wil take the emergency procedure, and start backing up my files and system ...
    I don't recall when this error first showed up, and I unluckily deleted my journal before noticing the problem, for it was getting big, so I can't trace back. But I have it in the journal since then (11.september). At begining only from time to time, but now things are getting worse.

  • Sata Errors on start-up.

    Hello, when I boot my laptop it gives me a repeating error after the Grub screen.
    [164266.343653] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen
    [164266.343662] ata1.00: failed command: WRITE FPDMA QUEUED
    [164266.343671] ata1.00: cmd 61/08:00:b8:02:47/00:00:13:00:00/40 tag 0 ncq 4096 out
    res 40/00:00:00:4f:c2/00:00:00:00:00/40 Emask 0x4 (timeout)
    [164266.343676] ata1.00: status: { DRDY }
    [164266.343680] ata1.00: failed command: WRITE FPDMA QUEUED
    [164266.343688] ata1.00: cmd 61/80:08:c0:02:47/00:00:13:00:00/40 tag 1 ncq 65536 out
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [164266.343692] ata1.00: status: { DRDY }
    [164266.343702] ata1.00: failed command: READ FPDMA QUEUED
    [164266.343709] ata1.00: cmd 60/00:10:e8:29:30/01:00:18:00:00/40 tag 2 ncq 131072 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [164266.343713] ata1.00: status: { DRDY }
    [164266.343716] ata1.00: failed command: READ FPDMA QUEUED
    [164266.343724] ata1.00: cmd 60/00:18:e8:2a:30/01:00:18:00:00/40 tag 3 ncq 131072 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [164266.343727] ata1.00: status: { DRDY }
    I am able to boot into my system, but it often will go through this error about 3-5 times.
    smartctl -a /dev/sda give me
    === START OF INFORMATION SECTION ===
    Device Model: SAMSUNG MZHPU128HCGM-00000
    Serial Number: S1ACNYAD532800
    LU WWN Device Id: 5 002538 60000baf3
    Firmware Version: UXM6401Q
    User Capacity: 128,035,676,160 bytes [128 GB]
    Sector Size: 512 bytes logical/physical
    Rotation Rate: Solid State Device
    Device is: Not in smartctl database [for details use: -P showall]
    ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
    SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
    Local Time is: Fri Jan 24 15:52:31 2014 PST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 0) seconds.
    Offline data collection
    capabilities: (0x5f) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Abort Offline collection upon new
    command.
    Offline surface scan supported.
    Self-test supported.
    No Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 2) minutes.
    Extended self-test routine
    recommended polling time: ( 10) minutes.
    SCT capabilities: (0x003d) SCT Status supported.
    SCT Error Recovery Control supported.
    SCT Feature Control supported.
    SCT Data Table supported.
    SMART Attributes Data Structure revision number: 1
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1484
    12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 5417
    177 Wear_Leveling_Count 0x0013 097 097 017 Pre-fail Always - 299
    178 Used_Rsvd_Blk_Cnt_Chip 0x0013 088 088 010 Pre-fail Always - 151
    179 Used_Rsvd_Blk_Cnt_Tot 0x0013 089 089 010 Pre-fail Always - 272
    180 Unused_Rsvd_Blk_Cnt_Tot 0x0013 089 089 010 Pre-fail Always - 2352
    183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
    SMART Error Log Version: 1
    No Errors Logged
    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]
    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    there are no logged errors which i find interesting.
    This is what i get from dmesg, you can see the ata stuff about halfway down, included thee rest in case it is relevant.
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86464 r8192 d24128 u524288
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1008698
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3951964K/4098932K available (5116K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 146968K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:8448 nr_irqs:984 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 16777216 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2294.540 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.29 BogoMIPS (lpj=7648466)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000027] Security Framework initialized
    [ 0.000033] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000034] Yama: becoming mindful.
    [ 0.000286] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001041] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001369] Mount-cache hash table entries: 256
    [ 0.001524] Initializing cgroup subsys memory
    [ 0.001546] Initializing cgroup subsys devices
    [ 0.001548] Initializing cgroup subsys freezer
    [ 0.001549] Initializing cgroup subsys net_cls
    [ 0.001550] Initializing cgroup subsys blkio
    [ 0.001570] CPU: Physical Processor ID: 0
    [ 0.001571] CPU: Processor Core ID: 0
    [ 0.001575] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.002546] mce: CPU supports 7 MCE banks
    [ 0.002557] CPU0: Thermal monitoring enabled (TM1)
    [ 0.002567] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.002659] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.003422] ACPI: Core revision 20130725
    [ 0.012141] ACPI: All ACPI Tables successfully acquired
    [ 0.019369] ftrace: allocating 20317 entries in 80 pages
    [ 0.027987] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.060971] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
    [ 0.060979] TSC deadline timer enabled
    [ 0.060986] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.060992] ... version: 3
    [ 0.060993] ... bit width: 48
    [ 0.060994] ... generic registers: 4
    [ 0.060995] ... value mask: 0000ffffffffffff
    [ 0.060996] ... max period: 0000ffffffffffff
    [ 0.060997] ... fixed-purpose events: 3
    [ 0.060998] ... event mask: 000000070000000f
    [ 0.098662] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.084392] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
    [ 0.140519] Brought up 4 CPUs
    [ 0.140522] smpboot: Total of 4 processors activated (18363.16 BogoMIPS)
    [ 0.144090] devtmpfs: initialized
    [ 0.146069] PM: Registering ACPI NVS region [mem 0xca4bb000-0xca4c1fff] (28672 bytes)
    [ 0.146071] PM: Registering ACPI NVS region [mem 0xdab56000-0xdbaaafff] (16076800 bytes)
    [ 0.146906] RTC time: 17:26:02, date: 01/24/14
    [ 0.146938] NET: Registered protocol family 16
    [ 0.147017] cpuidle: using governor ladder
    [ 0.147018] cpuidle: using governor menu
    [ 0.147040] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.147042] ACPI: bus type PCI registered
    [ 0.147043] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.147085] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.147086] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.153209] PCI: Using configuration type 1 for base access
    [ 0.153712] bio: create slab <bio-0> at 0
    [ 0.153800] ACPI: Added _OSI(Module Device)
    [ 0.153802] ACPI: Added _OSI(Processor Device)
    [ 0.153803] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.153804] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.155436] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.202559] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.204584] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.205103] ACPI: SSDT 00000000dab34c18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.205507] ACPI: Dynamic OEM Table Load:
    [ 0.205509] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.214255] ACPI: SSDT 00000000dab34618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.214935] ACPI: Dynamic OEM Table Load:
    [ 0.214937] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.227395] ACPI: SSDT 00000000daae6d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.227971] ACPI: Dynamic OEM Table Load:
    [ 0.227973] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.241337] ACPI: Interpreter enabled
    [ 0.241348] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.241356] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.241378] ACPI: (supports S0 S3 S4 S5)
    [ 0.241380] ACPI: Using IOAPIC for interrupt routing
    [ 0.241412] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.241594] ACPI: No dock devices found.
    [ 0.286876] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.287110] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.287277] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.287950] PCI host bridge to bus 0000:00
    [ 0.287952] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.287954] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.287956] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.287957] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.287959] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.287960] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.287961] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.287962] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.287964] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.287965] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.287966] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
    [ 0.287974] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.288152] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.288163] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
    [ 0.288170] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.288174] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.288346] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.288353] pci 0000:00:03.0: reg 0x10: [mem 0xf7d14000-0xf7d17fff 64bit]
    [ 0.288546] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.288562] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
    [ 0.288614] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.288748] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.288780] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.288799] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1c000-0xf7d1c01f 64bit]
    [ 0.288862] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.289032] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.289045] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
    [ 0.289100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.289235] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.289270] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
    [ 0.289338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.289476] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.289513] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.289580] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.289719] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.289754] pci 0000:00:1c.4: [8086:9c1a] type 01 class 0x060400
    [ 0.289822] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.289960] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.289995] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.290014] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d1a000-0xf7d1a3ff]
    [ 0.290097] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.290246] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.290278] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.290534] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.290547] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d19000-0xf7d190ff 64bit]
    [ 0.290564] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.290836] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.290876] pci 0000:01:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
    [ 0.291040] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.291084] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.297349] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.297356] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.297440] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.297445] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
    [ 0.297449] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf7bfffff]
    [ 0.297455] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
    [ 0.297600] pci 0000:03:00.0: [144d:a800] type 00 class 0x010601
    [ 0.297671] pci 0000:03:00.0: reg 0x24: [mem 0xf6810000-0xf6811fff]
    [ 0.297687] pci 0000:03:00.0: reg 0x30: [mem 0xf6800000-0xf680ffff pref]
    [ 0.297750] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.297784] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.307334] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.307338] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.307342] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.307347] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.307382] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.328006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.328066] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.328122] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.328177] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.328232] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.328287] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.328352] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.328401] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.328837] ACPI: Enabled 3 GPEs in block 00 to 7F
    [ 0.328844] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.328934] Found 1 acpi root devices
    [ 0.329121] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
    [ 0.329212] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.329215] vgaarb: loaded
    [ 0.329216] vgaarb: bridge control possible 0000:00:02.0
    [ 0.329252] PCI: Using ACPI for IRQ routing
    [ 0.330513] PCI: pci_cache_line_size set to 64 bytes
    [ 0.330545] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.330547] e820: reserve RAM buffer [mem 0xca4bb000-0xcbffffff]
    [ 0.330548] e820: reserve RAM buffer [mem 0xca8e5000-0xcbffffff]
    [ 0.330549] e820: reserve RAM buffer [mem 0xda898000-0xdbffffff]
    [ 0.330551] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
    [ 0.330617] NetLabel: Initializing
    [ 0.330618] NetLabel: domain hash size = 128
    [ 0.330618] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.330629] NetLabel: unlabeled traffic allowed by default
    [ 0.330642] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.330651] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.332671] Switched to clocksource hpet
    [ 0.336308] pnp: PnP ACPI init
    [ 0.336319] ACPI: bus type PNP registered
    [ 0.336423] pnp 00:00: [dma 4]
    [ 0.336442] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.336459] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.336535] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.336627] system 00:03: [io 0x0680-0x069f] has been reserved
    [ 0.336629] system 00:03: [io 0x2008-0x200b] has been reserved
    [ 0.336631] system 00:03: [io 0xffff] has been reserved
    [ 0.336632] system 00:03: [io 0xffff] has been reserved
    [ 0.336634] system 00:03: [io 0x1c00-0x1cfe] has been reserved
    [ 0.336635] system 00:03: [io 0x1d00-0x1dfe] has been reserved
    [ 0.336638] system 00:03: [io 0x1e00-0x1efe] has been reserved
    [ 0.336640] system 00:03: [io 0x1f00-0x1ffe] has been reserved
    [ 0.336641] system 00:03: [io 0x1800-0x18fe] could not be reserved
    [ 0.336643] system 00:03: [io 0x164e-0x164f] has been reserved
    [ 0.336645] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.336668] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.336702] system 00:05: [io 0x1854-0x1857] has been reserved
    [ 0.336705] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.336736] system 00:06: [io 0x04d0-0x04d1] has been reserved
    [ 0.336738] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.336768] pnp 00:07: Plug and Play ACPI device, IDs SNYa009 PNP030b (active)
    [ 0.336802] pnp 00:08: Plug and Play ACPI device, IDs FOX0015 PNP0f13 (active)
    [ 0.349893] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.349896] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.349899] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.349901] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.349903] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.349906] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.349908] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.349910] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.349912] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.349915] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.349917] system 00:09: [mem 0xf7fef000-0xf7feffff] has been reserved
    [ 0.349919] system 00:09: [mem 0xf7ff0000-0xf7ffffff] has been reserved
    [ 0.349922] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.350197] pnp: PnP ACPI: found 10 devices
    [ 0.350198] ACPI: bus type PNP unregistered
    [ 0.356468] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.356471] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.356484] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.356485] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.356489] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf200000-0xdf3fffff 64bit pref]
    [ 0.356491] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.356493] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.356496] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.356500] pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
    [ 0.356503] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff 64bit pref]
    [ 0.356507] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.356509] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
    [ 0.356513] pci 0000:00:1c.3: bridge window [mem 0xf7200000-0xf7bfffff]
    [ 0.356516] pci 0000:00:1c.3: bridge window [mem 0xf0a00000-0xf13fffff 64bit pref]
    [ 0.356521] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.356523] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.356526] pci 0000:00:1c.4: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.356529] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.356534] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.356536] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.356537] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.356539] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.356540] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.356541] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.356543] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.356544] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.356545] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.356547] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
    [ 0.356548] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.356550] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
    [ 0.356551] pci_bus 0000:01: resource 2 [mem 0xdf200000-0xdf3fffff 64bit pref]
    [ 0.356553] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.356554] pci_bus 0000:02: resource 1 [mem 0xf7200000-0xf7bfffff]
    [ 0.356555] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf13fffff 64bit pref]
    [ 0.356557] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.356558] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
    [ 0.356559] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf09fffff 64bit pref]
    [ 0.356585] NET: Registered protocol family 2
    [ 0.356724] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.356813] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.356873] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.356888] TCP: reno registered
    [ 0.356895] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.356909] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.356952] NET: Registered protocol family 1
    [ 0.356960] pci 0000:00:02.0: Boot video device
    [ 0.357196] PCI: CLS 64 bytes, default 64
    [ 0.357224] Unpacking initramfs...
    [ 0.407590] Freeing initrd memory: 3056K (ffff8800379f8000 - ffff880037cf4000)
    [ 0.407595] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.407597] software IO TLB [mem 0xd6898000-0xda898000] (64MB) mapped at [ffff8800d6898000-ffff8800da897fff]
    [ 0.407733] Scanning for low memory corruption every 60 seconds
    [ 0.407940] audit: initializing netlink socket (disabled)
    [ 0.407949] type=2000 audit(1390584362.399:1): initialized
    [ 0.419223] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.420210] zbud: loaded
    [ 0.420353] VFS: Disk quotas dquot_6.5.2
    [ 0.420384] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.420510] msgmni has been set to 7724
    [ 0.420720] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.420750] io scheduler noop registered
    [ 0.420751] io scheduler deadline registered
    [ 0.420772] io scheduler cfq registered (default)
    [ 0.421077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.421091] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.421125] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    [ 0.421126] vesafb: scrolling: redraw
    [ 0.421128] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.421958] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 8128k, total 8128k
    [ 0.526303] pci_bus 0000:01: Allocating resources
    [ 0.526317] pci_bus 0000:02: Allocating resources
    [ 0.526325] pci_bus 0000:03: Allocating resources
    [ 0.526335] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 0.526342] pci 0000:00:00.0: no hotplug settings from platform
    [ 0.526343] pci 0000:00:00.0: using default PCI settings
    [ 0.526347] pci 0000:00:02.0: no hotplug settings from platform
    [ 0.526347] pci 0000:00:02.0: using default PCI settings
    [ 0.526351] pci 0000:00:03.0: no hotplug settings from platform
    [ 0.526353] pci 0000:00:14.0: no hotplug settings from platform
    [ 0.526353] pci 0000:00:14.0: using default PCI settings
    [ 0.526359] pci 0000:00:16.0: no hotplug settings from platform
    [ 0.526360] pci 0000:00:16.0: using default PCI settings
    [ 0.526365] pci 0000:00:1b.0: no hotplug settings from platform
    [ 0.526367] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 0.526374] pci 0000:01:00.0: no hotplug settings from platform
    [ 0.526376] pcieport 0000:00:1c.3: no hotplug settings from platform
    [ 0.526378] pcieport 0000:00:1c.4: no hotplug settings from platform
    [ 0.526382] pci 0000:03:00.0: no hotplug settings from platform
    [ 0.526384] pci 0000:00:1d.0: no hotplug settings from platform
    [ 0.526385] pci 0000:00:1d.0: using default PCI settings
    [ 0.526391] pci 0000:00:1f.0: no hotplug settings from platform
    [ 0.526392] pci 0000:00:1f.0: using default PCI settings
    [ 0.526399] pci 0000:00:1f.3: no hotplug settings from platform
    [ 0.526400] pci 0000:00:1f.3: using default PCI settings
    [ 0.594158] Console: switching to colour frame buffer device 240x67
    [ 0.764658] fb0: VESA VGA frame buffer device
    [ 0.764669] intel_idle: MWAIT substates: 0x11142120
    [ 0.764670] intel_idle: v0.4 model 0x45
    [ 0.764671] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.764812] GHES: HEST is not enabled!
    [ 0.764852] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.765178] Linux agpgart interface v0.103
    [ 0.765230] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.767228] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.767247] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.767317] mousedev: PS/2 mouse device common for all mice
    [ 0.767349] rtc_cmos 00:04: RTC can wake from S4
    [ 0.767460] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 0.767485] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.767492] Intel P-state driver initializing.
    [ 0.767499] Intel pstate controlling: cpu 0
    [ 0.767512] Intel pstate controlling: cpu 1
    [ 0.767521] Intel pstate controlling: cpu 2
    [ 0.767534] Intel pstate controlling: cpu 3
    [ 0.767632] drop_monitor: Initializing network drop monitor service
    [ 0.767691] TCP: cubic registered
    [ 0.767762] NET: Registered protocol family 10
    [ 0.767892] NET: Registered protocol family 17
    [ 0.767899] Key type dns_resolver registered
    [ 0.768078] registered taskstats version 1
    [ 0.768458] Magic number: 14:948:441
    [ 0.768520] rtc_cmos 00:04: setting system clock to 2014-01-24 17:26:03 UTC (1390584363)
    [ 0.768563] PM: Hibernation image not present or could not be loaded.
    [ 0.769226] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    [ 0.769227] Write protecting the kernel read-only data: 8192k
    [ 0.771461] Freeing unused kernel memory: 1016K (ffff880001502000 - ffff880001600000)
    [ 0.772297] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    [ 0.779352] systemd-udevd[58]: starting version 208
    [ 0.785047] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.797392] ACPI: bus type USB registered
    [ 0.797414] usbcore: registered new interface driver usbfs
    [ 0.797421] usbcore: registered new interface driver hub
    [ 0.797466] usbcore: registered new device driver usb
    [ 0.797999] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.799071] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 0.799095] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.799102] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.799179] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.799199] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 0.799386] ehci-pci: EHCI PCI platform driver
    [ 0.799455] SCSI subsystem initialized
    [ 0.799607] hub 1-0:1.0: USB hub found
    [ 0.799622] hub 1-0:1.0: 9 ports detected
    [ 0.800521] libata version 3.00 loaded.
    [ 0.800968] ahci 0000:03:00.0: version 3.0
    [ 0.800973] pcieport 0000:00:1c.4: driver skip pci_set_master, fix it!
    [ 0.801055] ahci 0000:03:00.0: irq 57 for MSI/MSI-X
    [ 0.801379] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.801386] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.801629] hub 2-0:1.0: USB hub found
    [ 0.801641] hub 2-0:1.0: 4 ports detected
    [ 0.802611] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.802620] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.802628] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.802641] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.806555] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.806575] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d1a000
    [ 0.812432] ahci 0000:03:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
    [ 0.812437] ahci 0000:03:00.0: flags: 64bit ncq led clo only pio ccc
    [ 0.812628] scsi0 : ahci
    [ 0.812693] ata1: SATA max UDMA/133 abar m8192@0xf6810000 port 0xf6810100 irq 57
    [ 0.815754] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.815943] hub 3-0:1.0: USB hub found
    [ 0.815950] hub 3-0:1.0: 2 ports detected
    [ 1.138987] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.139321] ata1.00: ATA-9: SAMSUNG MZHPU128HCGM-00000, UXM6401Q, max UDMA/133
    [ 1.139325] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.144409] ata1.00: configured for UDMA/133
    [ 1.144657] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZHPU128 UXM6 PQ: 0 ANSI: 5
    [ 1.146113] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.146270] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.146275] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.146356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.146902] sda: sda1 sda2 sda3
    [ 1.147316] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.158944] usb 1-1: new full-speed USB device number 2 using xhci_hcd
    [ 1.182711] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.193496] usbcore: registered new interface driver usbhid
    [ 1.193500] usbhid: USB HID core driver
    [ 1.194234] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input2
    [ 1.194309] holtek_mouse 0003:04D9:A067.0001: input,hidraw0: USB HID v1.10 Keyboard [Holtek USB Gaming Mouse] on usb-0000:00:14.0-1/input0
    [ 1.194319] holtek_mouse 0003:04D9:A067.0002: Fixing up report descriptor
    [ 1.196141] input: Holtek USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/input/input3
    [ 1.196456] holtek_mouse 0003:04D9:A067.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Holtek USB Gaming Mouse] on usb-0000:00:14.0-1/input1
    [ 1.196878] holtek_mouse 0003:04D9:A067.0003: hiddev0,hidraw2: USB HID v1.10 Device [Holtek USB Gaming Mouse] on usb-0000:00:14.0-1/input2
    [ 1.338940] usb 1-2: new high-speed USB device number 3 using xhci_hcd
    [ 1.408820] tsc: Refined TSC clocksource calibration: 2294.688 MHz
    [ 1.512165] usb 1-3: new full-speed USB device number 4 using xhci_hcd
    [ 1.530066] input: eGalax Inc. eGalaxTouch EXC7910-1031-12.00.03 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input4
    [ 1.530235] hid-multitouch 0003:0EEF:A108.0004: input,hiddev0,hidraw3: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7910-1031-12.00.03] on usb-0000:00:14.0-3/input0
    [ 1.688734] usb 1-5: new high-speed USB device number 5 using xhci_hcd
    [ 1.901948] usb 1-6: new full-speed USB device number 6 using xhci_hcd
    [ 2.021826] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 2.145681] hub 3-1:1.0: USB hub found
    [ 2.145760] hub 3-1:1.0: 8 ports detected
    [ 2.408347] Switched to clocksource tsc
    [ 31.345489] ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x0 action 0x6 frozen
    [ 31.346708] ata1.00: failed command: READ FPDMA QUEUED
    [ 31.347389] ata1.00: cmd 60/08:00:18:34:e9/00:00:02:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 31.348976] ata1.00: status: { DRDY }
    [ 31.349377] ata1.00: failed command: READ FPDMA QUEUED
    [ 31.349939] ata1.00: cmd 60/08:08:77:29:54/00:00:02:00:00/40 tag 1 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 31.351514] ata1.00: status: { DRDY }
    [ 31.351915] ata1.00: failed command: READ FPDMA QUEUED
    [ 31.352479] ata1.00: cmd 60/08:10:b8:29:54/00:00:02:00:00/40 tag 2 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 31.354077] ata1.00: status: { DRDY }
    [ 31.354479] ata1: hard resetting link
    [ 31.678660] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 31.684167] ata1.00: configured for UDMA/133
    [ 31.684174] ata1.00: device reported invalid CHS sector 0
    [ 31.684176] ata1.00: device reported invalid CHS sector 0
    [ 31.684178] ata1.00: device reported invalid CHS sector 0
    [ 31.684201] ata1: EH complete
    [ 62.314918] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
    [ 62.316149] ata1.00: failed command: READ FPDMA QUEUED
    [ 62.316812] ata1.00: cmd 60/08:00:00:37:e9/00:00:02:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 62.318399] ata1.00: status: { DRDY }
    [ 62.318799] ata1.00: failed command: READ FPDMA QUEUED
    [ 62.319361] ata1.00: cmd 60/08:08:b0:2c:54/00:00:02:00:00/40 tag 1 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 62.320933] ata1.00: status: { DRDY }
    [ 62.321334] ata1: hard resetting link
    [ 62.644766] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 62.650110] ata1.00: configured for UDMA/133
    [ 62.650116] ata1.00: device reported invalid CHS sector 0
    [ 62.650119] ata1.00: device reported invalid CHS sector 0
    [ 62.650139] ata1: EH complete
    [ 93.337663] ata1.00: exception Emask 0x0 SAct 0x38 SErr 0x0 action 0x6 frozen
    [ 93.338882] ata1.00: failed command: READ FPDMA QUEUED
    [ 93.339687] ata1.00: cmd 60/08:18:4f:00:00/00:00:00:00:00/40 tag 3 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 93.341450] ata1.00: status: { DRDY }
    [ 93.341861] ata1.00: failed command: READ FPDMA QUEUED
    [ 93.342423] ata1.00: cmd 60/a8:20:67:01:00/00:00:00:00:00/40 tag 4 ncq 86016 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 93.344007] ata1.00: status: { DRDY }
    [ 93.344408] ata1.00: failed command: READ FPDMA QUEUED
    [ 93.344971] ata1.00: cmd 60/30:28:0f:02:00/00:00:00:00:00/40 tag 5 ncq 24576 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 93.346555] ata1.00: status: { DRDY }
    [ 93.346957] ata1: hard resetting link
    [ 93.670838] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 93.676247] ata1.00: configured for UDMA/133
    [ 93.676255] ata1.00: device reported invalid CHS sector 0
    [ 93.676257] ata1.00: device reported invalid CHS sector 0
    [ 93.676259] ata1.00: device reported invalid CHS sector 0
    [ 93.676282] ata1: EH complete
    [ 93.686876] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 124.360434] ata1.00: NCQ disabled due to excessive errors
    [ 124.360439] ata1.00: exception Emask 0x0 SAct 0x7ff00003 SErr 0x0 action 0x6 frozen
    [ 124.361725] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.362498] ata1.00: cmd 60/08:00:3f:02:c0/00:00:00:00:00/40 tag 0 ncq 4096 in
    res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.364214] ata1.00: status: { DRDY }
    [ 124.364614] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.365177] ata1.00: cmd 60/08:08:3f:01:c0/00:00:00:00:00/40 tag 1 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.366753] ata1.00: status: { DRDY }
    [ 124.367154] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.367717] ata1.00: cmd 60/08:a0:e7:01:c0/00:00:00:00:00/40 tag 20 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.369300] ata1.00: status: { DRDY }
    [ 124.369700] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.370263] ata1.00: cmd 60/08:a8:ef:01:c0/00:00:00:00:00/40 tag 21 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.371849] ata1.00: status: { DRDY }
    [ 124.372249] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.372811] ata1.00: cmd 60/08:b0:f7:01:c0/00:00:00:00:00/40 tag 22 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.374396] ata1.00: status: { DRDY }
    [ 124.374796] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.375357] ata1.00: cmd 60/08:b8:ff:01:c0/00:00:00:00:00/40 tag 23 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.376941] ata1.00: status: { DRDY }
    [ 124.377342] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.377904] ata1.00: cmd 60/08:c0:07:02:c0/00:00:00:00:00/40 tag 24 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.379488] ata1.00: status: { DRDY }
    [ 124.379888] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.380452] ata1.00: cmd 60/08:c8:0f:02:c0/00:00:00:00:00/40 tag 25 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.448312] ata1.00: status: { DRDY }
    [ 124.481867] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.515807] ata1.00: cmd 60/08:d0:17:02:c0/00:00:00:00:00/40 tag 26 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.583914] ata1.00: status: { DRDY }
    [ 124.617736] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.651626] ata1.00: cmd 60/08:d8:1f:02:c0/00:00:00:00:00/40 tag 27 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.719780] ata1.00: status: { DRDY }
    [ 124.753483] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.787434] ata1.00: cmd 60/08:e0:27:02:c0/00:00:00:00:00/40 tag 28 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.855720] ata1.00: status: { DRDY }
    [ 124.889475] ata1.00: failed command: READ FPDMA QUEUED
    [ 124.923145] ata1.00: cmd 60/08:e8:2f:02:c0/00:00:00:00:00/40 tag 29 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 124.991051] ata1.00: status: { DRDY }
    [ 125.024712] ata1.00: failed command: READ FPDMA QUEUED
    [ 125.058534] ata1.00: cmd 60/08:f0:37:02:c0/00:00:00:00:00/40 tag 30 ncq 4096 in
    res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 125.126745] ata1.00: status: { DRDY }
    [ 125.160422] ata1: hard resetting link
    [ 125.486470] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 125.491949] ata1.00: configured for UDMA/133
    [ 125.491955] ata1.00: device reported invalid CHS sector 0
    [ 125.491957] ata1.00: device reported invalid CHS sector 0
    [ 125.491960] ata1.00: device reported invalid CHS sector 0
    [ 125.491962] ata1.00: device reported invalid CHS sector 0
    [ 125.491963] ata1.00: device reported invalid CHS sector 0
    [ 125.491965] ata1.00: device reported invalid CHS sector 0
    [ 125.491967] ata1.00: device reported invalid CHS sector 0
    [ 125.491968] ata1.00: device reported invalid CHS sector 0
    [ 125.491970] ata1.00: device reported invalid CHS sector 0
    [ 125.491972] ata1.00: device reported invalid CHS sector 0
    [ 125.491973] ata1.00: device reported invalid CHS sector 0
    [ 125.491975] ata1.00: device reported invalid CHS sector 0
    [ 125.491977] ata1.00: device reported invalid CHS sector 0
    [ 125.491985] sd 0:0:0:0: [sda]
    [ 125.491987] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.491989] sd 0:0:0:0: [sda]
    [ 125.491990] Sense Key : 0xb [current] [descriptor]
    [ 125.491993] Descriptor sense data with sense descriptors (in hex):
    [ 125.491995] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.492003] 00 00 00 00
    [ 125.492006] sd 0:0:0:0: [sda]
    [ 125.492007] ASC=0x0 ASCQ=0x0
    [ 125.492009] sd 0:0:0:0: [sda] CDB:
    [ 125.492011] cdb[0]=0x28: 28 00 00 c0 02 3f 00 00 08 00
    [ 125.492018] end_request: I/O error, dev sda, sector 12583487
    [ 125.525741] sd 0:0:0:0: [sda]
    [ 125.525743] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.525745] sd 0:0:0:0: [sda]
    [ 125.525746] Sense Key : 0xb [current] [descriptor]
    [ 125.525748] Descriptor sense data with sense descriptors (in hex):
    [ 125.525749] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.525757] 00 00 00 00
    [ 125.525761] sd 0:0:0:0: [sda]
    [ 125.525762] ASC=0x0 ASCQ=0x0
    [ 125.525764] sd 0:0:0:0: [sda] CDB:
    [ 125.525765] cdb[0]=0x28: 28 00 00 c0 01 e7 00 00 08 00
    [ 125.525771] end_request: I/O error, dev sda, sector 12583399
    [ 125.559049] sd 0:0:0:0: [sda]
    [ 125.559050] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.559051] sd 0:0:0:0: [sda]
    [ 125.559052] Sense Key : 0xb [current] [descriptor]
    [ 125.559054] Descriptor sense data with sense descriptors (in hex):
    [ 125.559055] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.559062] 00 00 00 00
    [ 125.559065] sd 0:0:0:0: [sda]
    [ 125.559066] ASC=0x0 ASCQ=0x0
    [ 125.559067] sd 0:0:0:0: [sda] CDB:
    [ 125.559068] cdb[0]=0x28: 28 00 00 c0 01 ef 00 00 08 00
    [ 125.559074] end_request: I/O error, dev sda, sector 12583407
    [ 125.591752] sd 0:0:0:0: [sda]
    [ 125.591753] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.591754] sd 0:0:0:0: [sda]
    [ 125.591755] Sense Key : 0xb [current] [descriptor]
    [ 125.591756] Descriptor sense data with sense descriptors (in hex):
    [ 125.591757] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.591762] 00 00 00 00
    [ 125.591765] sd 0:0:0:0: [sda]
    [ 125.591765] ASC=0x0 ASCQ=0x0
    [ 125.591766] sd 0:0:0:0: [sda] CDB:
    [ 125.591767] cdb[0]=0x28: 28 00 00 c0 01 f7 00 00 08 00
    [ 125.591771] end_request: I/O error, dev sda, sector 12583415
    [ 125.624366] sd 0:0:0:0: [sda]
    [ 125.624368] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.624369] sd 0:0:0:0: [sda]
    [ 125.624370] Sense Key : 0xb [current] [descriptor]
    [ 125.624372] Descriptor sense data with sense descriptors (in hex):
    [ 125.624373] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.624379] 00 00 00 00
    [ 125.624383] sd 0:0:0:0: [sda]
    [ 125.624384] ASC=0x0 ASCQ=0x0
    [ 125.624385] sd 0:0:0:0: [sda] CDB:
    [ 125.624386] cdb[0]=0x28: 28 00 00 c0 01 ff 00 00 08 00
    [ 125.624391] end_request: I/O error, dev sda, sector 12583423
    [ 125.656331] sd 0:0:0:0: [sda]
    [ 125.656332] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.656334] sd 0:0:0:0: [sda]
    [ 125.656335] Sense Key : 0xb [current] [descriptor]
    [ 125.656336] Descriptor sense data with sense descriptors (in hex):
    [ 125.656337] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.656344] 00 00 00 00
    [ 125.656347] sd 0:0:0:0: [sda]
    [ 125.656348] ASC=0x0 ASCQ=0x0
    [ 125.656350] sd 0:0:0:0: [sda] CDB:
    [ 125.656351] cdb[0]=0x28: 28 00 00 c0 02 07 00 00 08 00
    [ 125.656356] end_request: I/O error, dev sda, sector 12583431
    [ 125.687903] sd 0:0:0:0: [sda]
    [ 125.687904] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.687905] sd 0:0:0:0: [sda]
    [ 125.687906] Sense Key : 0xb [current] [descriptor]
    [ 125.687907] Descriptor sense data with sense descriptors (in hex):
    [ 125.687908] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.687913] 00 00 00 00
    [ 125.687916] sd 0:0:0:0: [sda]
    [ 125.687916] ASC=0x0 ASCQ=0x0
    [ 125.687917] sd 0:0:0:0: [sda] CDB:
    [ 125.687918] cdb[0]=0x28: 28 00 00 c0 02 0f 00 00 08 00
    [ 125.687922] end_request: I/O error, dev sda, sector 12583439
    [ 125.718974] sd 0:0:0:0: [sda]
    [ 125.718975] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.718976] sd 0:0:0:0: [sda]
    [ 125.718977] Sense Key : 0xb [current] [descriptor]
    [ 125.718978] Descriptor sense data with sense descriptors (in hex):
    [ 125.718979] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.718983] 00 00 00 00
    [ 125.718986] sd 0:0:0:0: [sda]
    [ 125.718986] ASC=0x0 ASCQ=0x0
    [ 125.718987] sd 0:0:0:0: [sda] CDB:
    [ 125.718988] cdb[0]=0x28: 28 00 00 c0 02 17 00 00 08 00
    [ 125.718992] end_request: I/O error, dev sda, sector 12583447
    [ 125.749811] sd 0:0:0:0: [sda]
    [ 125.749812] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.749813] sd 0:0:0:0: [sda]
    [ 125.749813] Sense Key : 0xb [current] [descriptor]
    [ 125.749815] Descriptor sense data with sense descriptors (in hex):
    [ 125.749815] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.749820] 00 00 00 00
    [ 125.749823] sd 0:0:0:0: [sda]
    [ 125.749823] ASC=0x0 ASCQ=0x0
    [ 125.749825] sd 0:0:0:0: [sda] CDB:
    [ 125.749825] cdb[0]=0x28: 28 00 00 c0 02 1f 00 00 08 00
    [ 125.749829] end_request: I/O error, dev sda, sector 12583455
    [ 125.780191] sd 0:0:0:0: [sda]
    [ 125.780192] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.780194] sd 0:0:0:0: [sda]
    [ 125.780195] Sense Key : 0xb [current] [descriptor]
    [ 125.780196] Descriptor sense data with sense descriptors (in hex):
    [ 125.780198] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.780204] 00 00 00 00
    [ 125.780207] sd 0:0:0:0: [sda]
    [ 125.780208] ASC=0x0 ASCQ=0x0
    [ 125.780210] sd 0:0:0:0: [sda] CDB:
    [ 125.780211] cdb[0]=0x28: 28 00 00 c0 02 27 00 00 08 00
    [ 125.780216] end_request: I/O error, dev sda, sector 12583463
    [ 125.810208] sd 0:0:0:0: [sda]
    [ 125.810210] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.810211] sd 0:0:0:0: [sda]
    [ 125.810212] Sense Key : 0xb [current] [descriptor]
    [ 125.810214] Descriptor sense data with sense descriptors (in hex):
    [ 125.810215] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.810223] 00 00 00 00
    [ 125.810226] sd 0:0:0:0: [sda]
    [ 125.810227] ASC=0x0 ASCQ=0x0
    [ 125.810229] sd 0:0:0:0: [sda] CDB:
    [ 125.810230] cdb[0]=0x28: 28 00 00 c0 02 2f 00 00 08 00
    [ 125.810239] sd 0:0:0:0: [sda]
    [ 125.810240] Result: hostbyte=0x00 driverbyte=0x08
    [ 125.810242] sd 0:0:0:0: [sda]
    [ 125.810243] Sense Key : 0xb [current] [descriptor]
    [ 125.810245] Descriptor sense data with sense descriptors (in hex):
    [ 125.810246] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 125.810253] 00 00 00 00
    [ 125.810257] sd 0:0:0:0: [sda]
    [ 125.810258] ASC=0x0 ASCQ=0x0
    [ 125.810260] sd 0:0:0:0: [sda] CDB:
    [ 125.810261] cdb[0]=0x28: 28 00 00 c0 02 37 00 00 08 00
    [ 125.810273] ata1: EH complete
    [ 125.855545] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 125.855767] systemd[1]: No hostname configured.
    [ 125.855774] systemd[1]: Set hostname to <localhost>.
    [ 125.896662] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 125.896723] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 125.896736] systemd[1]: Starting Login Prompts.
    [ 125.896747] systemd[1]: Reached target Login Prompts.
    [ 125.896757] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
    [ 125.896765] systemd[1]: Starting Remote File Systems.
    [ 125.896773] systemd[1]: Reached target Remote File Systems.
    [ 125.896780] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
    [ 125.896788] systemd[1]: Expecting device sys-subsystem-net-devices-wlp0s20u2.device...
    [ 125.896796] systemd[1]: Expecting device sys-subsystem-net-devices-interface_name.device...
    [ 125.896805] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 125.896826] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 125.896834] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 125.896859] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 125.896867] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 125.896891] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 125.896898] systemd[1]: Starting Delayed Shutdown Socket.
    [ 125.896925] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 125.896950] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 125.897038] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 125.897049] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 125.897076] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 125.897084] systemd[1]: Starting Paths.
    [ 125.897091] systemd[1]: Reached target Paths.
    [ 125.897099] systemd[1]: Starting Encrypted Volumes.
    [ 125.897106] systemd[1]: Reached target Encrypted Volumes.
    [ 125.897114] systemd[1]: Starting Journal Socket.
    [ 125.897152] systemd[1]: Listening on Journal Socket.
    [ 125.897605] systemd[1]: Starting Apply Kernel Variables...
    [ 125.898095] systemd[1]: Mounting Huge Pages File System...
    [ 125.899047] systemd[1]: Started Load Kernel Modules.
    [ 125.901395] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 125.902589] systemd[1]: Started Set Up Additional Binary Formats.
    [ 125.902620] systemd[1]: Mounted FUSE Control File System.
    [ 125.902640] systemd[1]: Mounting Debug File System...
    [ 125.903016] systemd[1]: Starting Setup Virtual Console...
    [ 125.903358] systemd[1]: Mounting Configuration File System...
    [ 125.903640] systemd[1]: Mounting POSIX Message Queue File System...
    [ 125.903921] systemd[1]: Starting Journal Service...
    [ 125.904299] systemd[1]: Started Journal Service.
    [ 125.916845] EXT4-fs (sda1): re-mounted. Opts: data=ordered
    [ 125.919072] systemd-journald[122]: Vacuuming done, freed 0 bytes
    [ 125.959065] systemd-udevd[146]: starting version 208
    [ 126.006669] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 126.007045] ACPI: Requesting acpi_cpufreq
    [ 126.011801] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
    [ 126.011809] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.011813] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
    [ 126.011817] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
    [ 126.011821] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.011823] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20130725/utaddress-251)
    [ 126.011826] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20130725/utaddress-251)
    [ 126.011829] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.011831] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 126.016043] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 126.017806] mei_me 0000:00:16.0: setting latency timer to 64
    [ 126.017844] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 126.018168] ACPI: AC Adapter [ADP1] (on-line)
    [ 126.018533] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
    [ 126.018749] ACPI: Lid Switch [LID0]
    [ 126.024617] [drm] Initialized drm 1.1.0 20060810
    [ 126.025670] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input8
    [ 126.025678] ACPI: Power Button [PWRB]
    [ 126.027618] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130725/utaddress-251)
    [ 126.027625] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 126.029104] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 126.039570] sony_laptop: Sony Notebook Control Driver v0.6
    [ 126.040271] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input9
    [ 126.040323] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/SNY5001:00/input/input10
    [ 126.052679] sony_laptop: brightness ignored, must be controlled by ACPI video driver
    [ 126.053949] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
    [ 126.057104] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
    [ 126.061557] cfg80211: Calling CRDA to update world regulatory domain
    [ 126.063932] [drm] Memory usable by graphics device = 2048M
    [ 126.063939] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
    [ 126.063941] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 126.063958] Console: switching to colour dummy device 80x25
    [ 126.064087] i915 0000:00:02.0: setting latency timer to 64
    [ 126.065272] Bluetooth: Core ver 2.16
    [ 126.065288] NET: Registered protocol family 31
    [ 126.065290] Bluetooth: HCI device and connection manager initialized
    [ 126.065297] Bluetooth: HCI socket layer initialized
    [ 126.065300] Bluetooth: L2CAP socket layer initialized
    [ 126.065306] Bluetooth: SCO socket layer initialized
    [ 126.066200] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 126.066203] Copyright(c) 2003-2013 Intel Corporation
    [ 126.066234] pcieport 0000:00:1c.0: driver skip pci_set_master, fix it!
    [ 126.066379] iwlwifi 0000:01:00.0: irq 60 for MSI/MSI-X
    [ 126.066611] media: Linux media interface: v0.10
    [ 126.070972] Linux video capture interface: v2.00
    [ 126.071925] usbcore: registered new interface driver btusb
    [ 126.072283] iwlwifi 0000:01:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm
    [ 126.079665] uvcvideo: Found UVC 1.00 device USB Webcam (0bda:5727)
    [ 126.086285] Bluetooth: hci0: read Intel version: 370710018002030d33
    [ 126.086289] Bluetooth: hci0: Intel device is already patched. patch num: 33
    [ 126.086708] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
    [ 126.086756] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 126.086898] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 126.092008] input: USB Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
    [ 126.092641] usbcore: registered new interface driver uvcvideo
    [ 126.092643] USB Video Class driver (1.1.1)
    [ 126.097370] rtl8192cu: Chip version 0x10
    [ 126.099239] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x10
    [ 126.101863] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 126.101873] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 126.101874] [drm] Driver supports precise vblank timestamp query.
    [ 126.101936] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 126.103517] ACPI: Battery Slot [BAT0] (battery present)
    [ 126.106435] thermal LNXTHERM:00: registered as thermal_zone0
    [ 126.106438] ACPI: Thermal Zone [TZ00] (44 C)
    [ 126.113114] ACPI: Battery Slot [BAT1] (battery absent)
    [ 126.116315] iTCO_vendor_support: vendor-support=0
    [ 126.116847] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 126.116874] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 126.116974] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 126.126547] nfc: nfc_init: NFC Core ver 0.1
    [ 126.126568] NET: Registered protocol family 39
    [ 126.129879] Probing NFC pn544
    [ 126.140325] rtl8192cu: MAC address: 48:02:2a:7e:a6:e6
    [ 126.140330] rtl8192cu: Board Type 0
    [ 126.140406] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
    [ 126.140468] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
    [ 126.140647] usbcore: registered new interface driver rtl8192cu
    [ 126.141022] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x10
    [ 126.143777] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x10
    [ 126.145297] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x10
    [ 126.145956] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 126.146279] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
    [ 126.146546] rtlwifi: wireless switch is on
    [ 126.155037] Adding 4883756k swap on /dev/sda2. Priority:-1 extents:1 across:4883756k SSFS
    [ 126.157369] systemd-udevd[150]: renamed network interface wlan0 to wlp0s20u2
    [ 126.172432] fbcon: inteldrmfb (fb0) is primary device
    [ 126.174020] kvm: disabled by bios
    [ 126.191698] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 126.296157] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 126.316113] systemd-udevd[149]: renamed network interface wlan0 to wlp1s0
    [ 126.496564] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2699, fw id: 1401224
    [ 126.530856] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input13
    [ 127.272221] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 128.108351] Console: switching to colour frame buffer device 240x67
    [ 128.113031] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 128.113032] i915 0000:00:02.0: registered panic notifier
    [ 128.118797] systemd-journald[122]: Received request to flush runtime journal from PID 1
    [ 128.131283] rtl8192cu: MAC auto ON okay!
    [ 128.133182] acpi device:29: registered as cooling_device4
    [ 128.133807] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 128.133865] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14
    [ 128.133967] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 128.134326] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
    [ 128.142523] rtl8192cu: Tx queue select: 0x05
    [ 128.190200] hda_codec: invalid CONNECT_LIST verb 5[1]:0
    [ 128.190258] hda_codec: invalid CONNECT_LIST verb 6[1]:0
    [ 128.190324] hda_codec: invalid CONNECT_LIST verb 7[1]:0
    [ 128.191848] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
    [ 128.191965] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
    [ 128.192061] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
    [ 128.491245] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u2: link is not ready
    [ 128.491384] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 128.491528] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
    [ 128.502620] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
    [ 129.387913] wlp0s20u2: authenticate with 60:33:4b:e3:fe:31
    [ 129.409908] wlp0s20u2: send auth to 60:33:4b:e3:fe:31 (try 1/3)
    [ 129.415420] wlp0s20u2: authenticated
    [ 129.417546] wlp0s20u2: associate with 60:33:4b:e3:fe:31 (try 1/3)
    [ 129.426949] wlp0s20u2: RX AssocResp from 60:33:4b:e3:fe:31 (capab=0x1421 status=0 aid=3)
    [ 129.426980] wlp0s20u2: associated
    [ 129.427017] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u2: link becomes ready
    [ 132.215759] wlp1s0: authenticate with 28:c6:8e:38:76:40
    [ 132.216650] wlp1s0: send auth to 28:c6:8e:38:76:40 (try 1/3)
    [ 132.218773] wlp1s0: authenticated
    [ 132.219328] wlp1s0: associate with 28:c6:8e:38:76:40 (try 1/3)
    [ 132.223547] wlp1s0: RX AssocResp from 28:c6:8e:38:76:40 (capab=0x411 status=0 aid=2)
    [ 132.226025] wlp1s0: associated
    [ 132.226065] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
    [ 258.046843] fuse init (API version 7.22)
    [ 378.299290] ACPI: \_SB_.PCI0: Bus check notify on _handle_hotplug_event_root
    [ 383.308507] PM: Syncing filesystems ... done.
    [ 383.316136] PM: Preparing system for mem sleep
    [ 383.316489] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 383.318093] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 383.319198] PM: Entering mem sleep
    [ 383.319988] Suspending console(s) (use no_console_suspend to debug)
    [ 383.320296] wlp1s0: deauthenticating from 28:c6:8e:38:76:40 by local choice (reason=3)
    [ 383.363765] wlp0s20u2: deauthenticating from 60:33:4b:e3:fe:31 by local choice (reason=3)
    [ 383.410660] cfg80211: Calling CRDA for country: US
    [ 383.410789] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 383.411362] sd 0:0:0:0: [sda] Stopping disk
    [ 383.446489] mei_me 0000:00:16.0: suspend
    [ 383.446519] Removing pn544
    [ 383.672813] PM: suspend of devices complete after 352.743 msecs
    [ 383.672995] PM: late suspend of devices complete after 0.180 msecs
    [ 383.686193] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 383.712750] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 383.726404] PM: noirq suspend of devices complete after 53.436 msecs
    [ 383.726772] ACPI: Preparing to enter system sleep state S3
    [ 383.727125] PM: Saving platform NVS memory
    [ 383.738495] Disabling non-boot CPUs ...
    [ 383.740019] smpboot: CPU 1 is now offline
    [ 383.842641] smpboot: CPU 2 is now offline
    [ 383.945915] smpboot: CPU 3 is now offline
    [ 383.947636] ACPI: Low-level resume complete
    [ 383.947694] PM: Restoring platform NVS memory
    [ 383.950388] Enabling non-boot CPUs ...
    [ 383.950428] smpboot: Booting Node 0 Processor 1 APIC 0x2
    [ 383.964791] Intel pstate controlling: cpu 1
    [ 383.964841] CPU1 is up
    [ 383.964859] smpboot: Booting Node 0 Processor 2 APIC 0x1
    [ 383.979205] Intel pstate controlling: cpu 2
    [ 383.979242] CPU2 is up
    [ 383.979256] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 383.993602] Intel pstate controlling: cpu 3
    [ 383.993638] CPU3 is up
    [ 384.000372] ACPI: Waking up from system sleep state S3
    [ 384.040063] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 384.080048] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 384.106810] PM: noirq resume of devices complete after 105.593 msecs
    [ 384.106933] PM: early resume of devices complete after 0.104 msecs
    [ 384.106955] i915 0000:00:02.0: setting latency timer to 64
    [ 384.106964] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 384.107040] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 384.107043] snd_hda_intel 0000:00:03.0: irq 59 for MSI/MSI-X
    [ 384.107191] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
    [ 384.107217] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 384.143506] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
    [ 384.143557] Probing NFC pn544
    [ 384.446544] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 384.451776] ata1.00: c

    The first thing to do is use smartctl to test the drive. Start with the short test ( smartctl -t short /dev/sdX ), and if it passes run the long test ( ... -t long ... ).

  • Getting and fsck error on startup about /bin/plymouth

    Hello,
    Yesterday I was rebooting my laptop when this happened, during the booting up there was an usual filesystem check and the it gave me an error and asked me to enter my root password for maintenance or press ctrl+D to continue I just continued to the DM and did run
    journalctl -xb
    I run openbox with compton and conky and basic apps I do not have KDE installed although I did try installing kde5 but  was unable to install completely due to some depenecides not installing.
    this is the output:
    -- Logs begin at Mon 2014-06-30 10:27:20 IST, end at Mon 2014-07-28 07:02:38 IST. --
    Jul 28 06:47:43 sentinel systemd-journal[118]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.7M free of 491.9M available → current limit 49.8M).
    Jul 28 06:47:43 sentinel systemd-journal[118]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.7M free of 491.9M available → current limit 49.8M).
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpuset
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpu
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys cpuacct
    Jul 28 06:47:43 sentinel kernel: Linux version 3.14.4-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.0 20140507 (prerelease) (GCC) ) #1 SMP PREEMPT Tue May 13 16:44:54 CEST 2014
    Jul 28 06:47:43 sentinel kernel: e820: BIOS-provided physical RAM map:
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003f6cffff] usable
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000003f6d0000-0x000000003f6e2fff] ACPI NVS
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x000000003f6e3000-0x000000003fffffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Jul 28 06:47:43 sentinel kernel: BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    Jul 28 06:47:43 sentinel kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    Jul 28 06:47:43 sentinel kernel: SMBIOS 2.4 present.
    Jul 28 06:47:43 sentinel kernel: DMI: LENOVO LENOVO3000 Y410 /IGT30, BIOS 05CN39WW(V1.10) 08/29/2007
    Jul 28 06:47:43 sentinel kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Jul 28 06:47:43 sentinel kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jul 28 06:47:43 sentinel kernel: e820: last_pfn = 0x3f6d0 max_arch_pfn = 0x100000
    Jul 28 06:47:43 sentinel kernel: MTRR default type: uncachable
    Jul 28 06:47:43 sentinel kernel: MTRR fixed ranges enabled:
    Jul 28 06:47:43 sentinel kernel: 00000-9FFFF write-back
    Jul 28 06:47:43 sentinel kernel: A0000-BFFFF uncachable
    Jul 28 06:47:43 sentinel kernel: C0000-FFFFF write-protect
    Jul 28 06:47:43 sentinel kernel: MTRR variable ranges enabled:
    Jul 28 06:47:43 sentinel kernel: 0 base 000000000 mask FC0000000 write-back
    Jul 28 06:47:43 sentinel kernel: 1 base 03F700000 mask FFFF00000 uncachable
    Jul 28 06:47:43 sentinel kernel: 2 base 03F800000 mask FFF800000 uncachable
    Jul 28 06:47:43 sentinel kernel: 3 disabled
    Jul 28 06:47:43 sentinel kernel: 4 disabled
    Jul 28 06:47:43 sentinel kernel: 5 disabled
    Jul 28 06:47:43 sentinel kernel: 6 disabled
    Jul 28 06:47:43 sentinel kernel: 7 disabled
    Jul 28 06:47:43 sentinel kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jul 28 06:47:43 sentinel kernel: found SMP MP-table at [mem 0x000f70d0-0x000f70df] mapped at [c00f70d0]
    Jul 28 06:47:43 sentinel kernel: Scanning 1 areas for low memory corruption
    Jul 28 06:47:43 sentinel kernel: initial memory mapped: [mem 0x00000000-0x01bfffff]
    Jul 28 06:47:43 sentinel kernel: Base memory trampoline at [c009b000] 9b000 size 16384
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x00000000-0x000fffff] page 4k
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x37000000-0x373fffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x37000000-0x373fffff] page 2M
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x30000000-0x36ffffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x30000000-0x36ffffff] page 2M
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x00100000-0x2fffffff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x00100000-0x003fffff] page 4k
    Jul 28 06:47:43 sentinel kernel: [mem 0x00400000-0x2fffffff] page 2M
    Jul 28 06:47:43 sentinel kernel: init_memory_mapping: [mem 0x37400000-0x377fdfff]
    Jul 28 06:47:43 sentinel kernel: [mem 0x37400000-0x377fdfff] page 4k
    Jul 28 06:47:43 sentinel kernel: BRK [0x01798000, 0x01798fff] PGTABLE
    Jul 28 06:47:43 sentinel kernel: RAMDISK: [mem 0x37958000-0x37ca3fff]
    Jul 28 06:47:43 sentinel kernel: Allocated new RAMDISK: [mem 0x374b2000-0x377fda97]
    Jul 28 06:47:43 sentinel kernel: Move RAMDISK from [mem 0x37958000-0x37ca3a97] to [mem 0x374b2000-0x377fda97]
    Jul 28 06:47:43 sentinel kernel: ACPI: RSDP 000f7050 000024 (v02 LENOVO)
    Jul 28 06:47:43 sentinel kernel: ACPI: XSDT 3f6d7561 00008C (v01 LENOVO CB-01 06040000 LTP 00000000)
    Jul 28 06:47:43 sentinel kernel: ACPI: FACP 3f6dfc3a 0000F4 (v03 LENOVO CB-01 06040000 ALAN 00000001)
    Jul 28 06:47:43 sentinel kernel: ACPI: DSDT 3f6d92a6 006920 (v02 LENOVO CB-01 06040000 INTL 20060608)
    Jul 28 06:47:43 sentinel kernel: ACPI: FACS 3f6e2fc0 000040
    Jul 28 06:47:43 sentinel kernel: ACPI: HPET 3f6dfd2e 000038 (v01 LENOVO CB-01 06040000 LOHR 0000005A)
    Jul 28 06:47:43 sentinel kernel: ACPI: MCFG 3f6dfd66 00003C (v01 LENOVO CB-01 06040000 LOHR 0000005A)
    Jul 28 06:47:43 sentinel kernel: ACPI: TCPA 3f6dfda2 000032 (v01 LENOVO CB-01 06040000 LOHR 0000005A)
    Jul 28 06:47:43 sentinel kernel: ACPI: TMOR 3f6dfdd4 000026 (v01 LENOVO CB-01 06040000 PTL 00000003)
    Jul 28 06:47:43 sentinel kernel: ACPI: SLIC 3f6dfdfa 000176 (v01 LENOVO CB-01 06040000 TBD 00000001)
    Jul 28 06:47:43 sentinel kernel: ACPI: APIC 3f6dff70 000068 (v01 LENOVO CB-01 06040000 LTP 00000000)
    Jul 28 06:47:43 sentinel kernel: ACPI: BOOT 3f6dffd8 000028 (v01 LENOVO CB-01 06040000 LTP 00000001)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8c57 00064F (v01 SataRe SataPri 00001000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d85c5 000692 (v01 SataRe SataSec 00001000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7b79 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7ad3 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d75ed 0004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Local APIC address 0xfee00000
    Jul 28 06:47:43 sentinel kernel: 126MB HIGHMEM available.
    Jul 28 06:47:43 sentinel kernel: 887MB LOWMEM available.
    Jul 28 06:47:43 sentinel kernel: mapped low ram: 0 - 377fe000
    Jul 28 06:47:43 sentinel kernel: low ram: 0 - 377fe000
    Jul 28 06:47:43 sentinel kernel: BRK [0x01799000, 0x01799fff] PGTABLE
    Jul 28 06:47:43 sentinel kernel: Zone ranges:
    Jul 28 06:47:43 sentinel kernel: DMA [mem 0x00001000-0x00ffffff]
    Jul 28 06:47:43 sentinel kernel: Normal [mem 0x01000000-0x377fdfff]
    Jul 28 06:47:43 sentinel kernel: HighMem [mem 0x377fe000-0x3f6cffff]
    Jul 28 06:47:43 sentinel kernel: Movable zone start for each node
    Jul 28 06:47:43 sentinel kernel: Early memory node ranges
    Jul 28 06:47:43 sentinel kernel: node 0: [mem 0x00001000-0x0009efff]
    Jul 28 06:47:43 sentinel kernel: node 0: [mem 0x00100000-0x3f6cffff]
    Jul 28 06:47:43 sentinel kernel: On node 0 totalpages: 259694
    Jul 28 06:47:43 sentinel kernel: free_area_init_node: node 0, pgdat c15fc600, node_mem_map f6cc2020
    Jul 28 06:47:43 sentinel kernel: DMA zone: 32 pages used for memmap
    Jul 28 06:47:43 sentinel kernel: DMA zone: 0 pages reserved
    Jul 28 06:47:43 sentinel kernel: DMA zone: 3998 pages, LIFO batch:0
    Jul 28 06:47:43 sentinel kernel: Normal zone: 1744 pages used for memmap
    Jul 28 06:47:43 sentinel kernel: Normal zone: 223230 pages, LIFO batch:31
    Jul 28 06:47:43 sentinel kernel: HighMem zone: 254 pages used for memmap
    Jul 28 06:47:43 sentinel kernel: HighMem zone: 32466 pages, LIFO batch:7
    Jul 28 06:47:43 sentinel kernel: Using APIC driver default
    Jul 28 06:47:43 sentinel kernel: ACPI: PM-Timer IO Port: 0x1008
    Jul 28 06:47:43 sentinel kernel: ACPI: Local APIC address 0xfee00000
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    Jul 28 06:47:43 sentinel kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Jul 28 06:47:43 sentinel kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Jul 28 06:47:43 sentinel kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Jul 28 06:47:43 sentinel kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    Jul 28 06:47:43 sentinel kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jul 28 06:47:43 sentinel kernel: ACPI: IRQ0 used by override.
    Jul 28 06:47:43 sentinel kernel: ACPI: IRQ2 used by override.
    Jul 28 06:47:43 sentinel kernel: ACPI: IRQ9 used by override.
    Jul 28 06:47:43 sentinel kernel: Using ACPI (MADT) for SMP configuration information
    Jul 28 06:47:43 sentinel kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Jul 28 06:47:43 sentinel kernel: smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    Jul 28 06:47:43 sentinel kernel: nr_irqs_gsi: 40
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
    Jul 28 06:47:43 sentinel kernel: PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
    Jul 28 06:47:43 sentinel kernel: e820: [mem 0x40000000-0xdfffffff] available for PCI devices
    Jul 28 06:47:43 sentinel kernel: Booting paravirtualized kernel on bare hardware
    Jul 28 06:47:43 sentinel kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    Jul 28 06:47:43 sentinel kernel: PERCPU: Embedded 14 pages/cpu @f6ca0000 s33792 r0 d23552 u57344
    Jul 28 06:47:43 sentinel kernel: pcpu-alloc: s33792 r0 d23552 u57344 alloc=14*4096
    Jul 28 06:47:43 sentinel kernel: pcpu-alloc: [0] 0 [0] 1
    Jul 28 06:47:43 sentinel kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257918
    Jul 28 06:47:43 sentinel kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=45e3c622-e8c8-40b6-be7c-0c847fe91502 rw quiet
    Jul 28 06:47:43 sentinel kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
    Jul 28 06:47:43 sentinel kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Jul 28 06:47:43 sentinel kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jul 28 06:47:43 sentinel kernel: Initializing CPU#0
    Jul 28 06:47:43 sentinel kernel: allocated 2078328 bytes of page_cgroup
    Jul 28 06:47:43 sentinel kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jul 28 06:47:43 sentinel kernel: Initializing HighMem for node 0 (000377fe:0003f6d0)
    Jul 28 06:47:43 sentinel kernel: Initializing Movable for node 0 (00000000:00000000)
    Jul 28 06:47:43 sentinel kernel: Memory: 1016448K/1038776K available (4445K kernel code, 470K rwdata, 1280K rodata, 568K init, 956K bss, 22328K reserved, 129864K highmem)
    Jul 28 06:47:43 sentinel kernel: virtual kernel memory layout:
    fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc160f000 - 0xc169d000 ( 568 kB)
    .data : 0xc1457b12 - 0xc160eb40 (1756 kB)
    .text : 0xc1000000 - 0xc1457b12 (4446 kB)
    Jul 28 06:47:43 sentinel kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
    Jul 28 06:47:43 sentinel kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Jul 28 06:47:43 sentinel kernel: Preemptible hierarchical RCU implementation.
    Jul 28 06:47:43 sentinel kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jul 28 06:47:43 sentinel kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jul 28 06:47:43 sentinel kernel: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    Jul 28 06:47:43 sentinel kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    Jul 28 06:47:43 sentinel kernel: NR_IRQS:2304 nr_irqs:512 16
    Jul 28 06:47:43 sentinel kernel: CPU 0 irqstacks, hard=f6408000 soft=f640a000
    Jul 28 06:47:43 sentinel kernel: Console: colour dummy device 80x25
    Jul 28 06:47:43 sentinel kernel: console [tty0] enabled
    Jul 28 06:47:43 sentinel kernel: hpet clockevent registered
    Jul 28 06:47:43 sentinel kernel: tsc: Fast TSC calibration using PIT
    Jul 28 06:47:43 sentinel kernel: tsc: Detected 1463.025 MHz processor
    Jul 28 06:47:43 sentinel kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 2927.96 BogoMIPS (lpj=4876750)
    Jul 28 06:47:43 sentinel kernel: pid_max: default: 32768 minimum: 301
    Jul 28 06:47:43 sentinel kernel: ACPI: Core revision 20131218
    Jul 28 06:47:43 sentinel kernel: ACPI: All ACPI Tables successfully acquired
    Jul 28 06:47:43 sentinel kernel: Security Framework initialized
    Jul 28 06:47:43 sentinel kernel: Yama: becoming mindful.
    Jul 28 06:47:43 sentinel kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Jul 28 06:47:43 sentinel kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys memory
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys devices
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys freezer
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys net_cls
    Jul 28 06:47:43 sentinel kernel: Initializing cgroup subsys blkio
    Jul 28 06:47:43 sentinel kernel: CPU: Physical Processor ID: 0
    Jul 28 06:47:43 sentinel kernel: CPU: Processor Core ID: 0
    Jul 28 06:47:43 sentinel kernel: mce: CPU supports 6 MCE banks
    Jul 28 06:47:43 sentinel kernel: CPU0: Thermal monitoring handled by SMI
    Jul 28 06:47:43 sentinel kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    tlb_flushall_shift: -1
    Jul 28 06:47:43 sentinel kernel: Freeing SMP alternatives memory: 16K (c169d000 - c16a1000)
    Jul 28 06:47:43 sentinel kernel: ftrace: allocating 18913 entries in 37 pages
    Jul 28 06:47:43 sentinel kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
    Jul 28 06:47:43 sentinel kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jul 28 06:47:43 sentinel kernel: smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz (fam: 06, model: 0f, stepping: 0d)
    Jul 28 06:47:43 sentinel kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    Jul 28 06:47:43 sentinel kernel: perf_event_intel: PEBS disabled due to CPU errata
    Jul 28 06:47:43 sentinel kernel: ... version: 2
    Jul 28 06:47:43 sentinel kernel: ... bit width: 40
    Jul 28 06:47:43 sentinel kernel: ... generic registers: 2
    Jul 28 06:47:43 sentinel kernel: ... value mask: 000000ffffffffff
    Jul 28 06:47:43 sentinel kernel: ... max period: 000000007fffffff
    Jul 28 06:47:43 sentinel kernel: ... fixed-purpose events: 3
    Jul 28 06:47:43 sentinel kernel: ... event mask: 0000000700000003
    Jul 28 06:47:43 sentinel kernel: CPU 1 irqstacks, hard=f64cc000 soft=f64ce000
    Jul 28 06:47:43 sentinel kernel: x86: Booting SMP configuration:
    Jul 28 06:47:43 sentinel kernel: .... node #0, CPUs: #1
    Jul 28 06:47:43 sentinel kernel: Initializing CPU#1
    Jul 28 06:47:43 sentinel kernel: CPU1: Thermal monitoring handled by SMI
    Jul 28 06:47:43 sentinel kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jul 28 06:47:43 sentinel kernel: x86: Booted up 1 node, 2 CPUs
    Jul 28 06:47:43 sentinel kernel: smpboot: Total of 2 processors activated (5854.93 BogoMIPS)
    Jul 28 06:47:43 sentinel kernel: devtmpfs: initialized
    Jul 28 06:47:43 sentinel kernel: PM: Registering ACPI NVS region [mem 0x3f6d0000-0x3f6e2fff] (77824 bytes)
    Jul 28 06:47:43 sentinel kernel: pinctrl core: initialized pinctrl subsystem
    Jul 28 06:47:43 sentinel kernel: RTC time: 1:17:37, date: 07/28/14
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 16
    Jul 28 06:47:43 sentinel kernel: cpuidle: using governor ladder
    Jul 28 06:47:43 sentinel kernel: cpuidle: using governor menu
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type PCI registered
    Jul 28 06:47:43 sentinel kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jul 28 06:47:43 sentinel kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    Jul 28 06:47:43 sentinel kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    Jul 28 06:47:43 sentinel kernel: PCI: Using MMCONFIG for extended config space
    Jul 28 06:47:43 sentinel kernel: PCI: Using configuration type 1 for base access
    Jul 28 06:47:43 sentinel kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    Jul 28 06:47:43 sentinel kernel: mtrr: probably your BIOS does not setup all CPUs.
    Jul 28 06:47:43 sentinel kernel: mtrr: corrected configuration.
    Jul 28 06:47:43 sentinel kernel: bio: create slab <bio-0> at 0
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Module Device)
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Processor Device)
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jul 28 06:47:43 sentinel kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jul 28 06:47:43 sentinel kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8307 0001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d7dd8 0004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d84fd 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT 3f6d8282 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Dynamic OEM Table Load:
    Jul 28 06:47:43 sentinel kernel: ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    Jul 28 06:47:43 sentinel kernel: ACPI: Interpreter enabled
    Jul 28 06:47:43 sentinel kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
    Jul 28 06:47:43 sentinel kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
    Jul 28 06:47:43 sentinel kernel: ACPI: (supports S0 S3 S4 S5)
    Jul 28 06:47:43 sentinel kernel: ACPI: Using IOAPIC for interrupt routing
    Jul 28 06:47:43 sentinel kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    Jul 28 06:47:43 sentinel kernel: ACPI: No dock devices found.
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0x40000000-0xdfffffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: acpi PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
    Jul 28 06:47:43 sentinel kernel: PCI: root bus 00: using default resources
    Jul 28 06:47:43 sentinel kernel: PCI host bridge to bus 0000:00
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf8000000-0xf80fffff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf8100000-0xf81fffff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf8504000-0xf85043ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1a.7: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xf8300000-0xf8303fff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xf8504400-0xf85047ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: [8086:2828] type 00 class 0x010180
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: reg 0x24: [io 0x18d0-0x18df]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: [8086:4222] type 00 class 0x028000
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: reg 0x10: [mem 0xf0000000-0xf0000fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PCI bridge to [bus 04]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: acpiphp: Slot [1] registered
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PCI bridge to [bus 05]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: [14e4:1713] type 00 class 0x020000
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: reg 0x10: [mem 0xb8000000-0xb800ffff 64bit]
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: PME# supported from D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:06:00.0: System wakeup disabled by ACPI
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PCI bridge to [bus 06]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xb8000000-0xbbffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: [1180:0832] type 00 class 0x0c0010
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: MMC cards are now supported by standard SDHCI controller
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: reg 0x10: [mem 0xf8200000-0xf82007ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: [1180:0822] type 00 class 0x080500
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: reg 0x10: [mem 0xf8200800-0xf82008ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: [1180:0592] type 00 class 0x088000
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: reg 0x10: [mem 0xf8201000-0xf82010ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: [1180:0852] type 00 class 0x088000
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: reg 0x10: [mem 0xf8201400-0xf82014ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: supports D1 D2
    Jul 28 06:47:43 sentinel kernel: pci 0000:08:06.3: PME# supported from D0 D1 D2 D3hot D3cold
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: on NUMA node 0
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Jul 28 06:47:43 sentinel kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Jul 28 06:47:43 sentinel kernel: ACPI: Enabled 4 GPEs in block 00 to 1F
    Jul 28 06:47:43 sentinel kernel: ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    Jul 28 06:47:43 sentinel kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Jul 28 06:47:43 sentinel kernel: vgaarb: loaded
    Jul 28 06:47:43 sentinel kernel: vgaarb: bridge control possible 0000:00:02.0
    Jul 28 06:47:43 sentinel kernel: PCI: Using ACPI for IRQ routing
    Jul 28 06:47:43 sentinel kernel: PCI: pci_cache_line_size set to 64 bytes
    Jul 28 06:47:43 sentinel kernel: e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
    Jul 28 06:47:43 sentinel kernel: e820: reserve RAM buffer [mem 0x3f6d0000-0x3fffffff]
    Jul 28 06:47:43 sentinel kernel: NetLabel: Initializing
    Jul 28 06:47:43 sentinel kernel: NetLabel: domain hash size = 128
    Jul 28 06:47:43 sentinel kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jul 28 06:47:43 sentinel kernel: NetLabel: unlabeled traffic allowed by default
    Jul 28 06:47:43 sentinel kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    Jul 28 06:47:43 sentinel kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    Jul 28 06:47:43 sentinel kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Jul 28 06:47:43 sentinel kernel: Switched to clocksource hpet
    Jul 28 06:47:43 sentinel kernel: pnp: PnP ACPI init
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type PNP registered
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:01: [dma 4]
    Jul 28 06:47:43 sentinel kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    Jul 28 06:47:43 sentinel kernel: system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x0680-0x069f] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x0800-0x080f] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x1000-0x107f] could not be reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0x1180-0x11bf] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0xfe00] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: [io 0xff00-0xff7f] has been reserved
    Jul 28 06:47:43 sentinel kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    Jul 28 06:47:43 sentinel kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
    Jul 28 06:47:43 sentinel kernel: pnp: PnP ACPI: found 9 devices
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type PNP unregistered
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1f.3: BAR 0: assigned [mem 0x40000000-0x400000ff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: PCI bridge to [bus 04]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: PCI bridge to [bus 05]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: PCI bridge to [bus 06]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xb8000000-0xbbffffff]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: PCI bridge to [bus 08]
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:1e.0: bridge window [mem 0xf8200000-0xf82fffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 1 [mem 0xf4000000-0xf7ffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:05: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 1 [mem 0xb8000000-0xbbffffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:06: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 1 [mem 0xf8200000-0xf82fffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 4 [io 0x0000-0xffff]
    Jul 28 06:47:43 sentinel kernel: pci_bus 0000:08: resource 5 [mem 0x00000000-0xffffffff]
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 2
    Jul 28 06:47:43 sentinel kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    Jul 28 06:47:43 sentinel kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    Jul 28 06:47:43 sentinel kernel: TCP: Hash tables configured (established 8192 bind 8192)
    Jul 28 06:47:43 sentinel kernel: TCP: reno registered
    Jul 28 06:47:43 sentinel kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
    Jul 28 06:47:43 sentinel kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 1
    Jul 28 06:47:43 sentinel kernel: pci 0000:00:02.0: Boot video device
    Jul 28 06:47:43 sentinel kernel: PCI: CLS 64 bytes, default 64
    Jul 28 06:47:43 sentinel kernel: Unpacking initramfs...
    Jul 28 06:47:43 sentinel kernel: Freeing initrd memory: 3376K (f74b2000 - f77fe000)
    Jul 28 06:47:43 sentinel kernel: Simple Boot Flag at 0x37 set to 0x1
    Jul 28 06:47:43 sentinel kernel: apm: BIOS not found.
    Jul 28 06:47:43 sentinel kernel: Scanning for low memory corruption every 60 seconds
    Jul 28 06:47:43 sentinel kernel: futex hash table entries: 512 (order: 3, 32768 bytes)
    Jul 28 06:47:43 sentinel kernel: bounce pool size: 64 pages
    Jul 28 06:47:43 sentinel kernel: HugeTLB registered 4 MB page size, pre-allocated 0 pages
    Jul 28 06:47:43 sentinel kernel: zbud: loaded
    Jul 28 06:47:43 sentinel kernel: VFS: Disk quotas dquot_6.5.2
    Jul 28 06:47:43 sentinel kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Jul 28 06:47:43 sentinel kernel: msgmni has been set to 1738
    Jul 28 06:47:43 sentinel kernel: Key type big_key registered
    Jul 28 06:47:43 sentinel kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jul 28 06:47:43 sentinel kernel: io scheduler noop registered
    Jul 28 06:47:43 sentinel kernel: io scheduler deadline registered
    Jul 28 06:47:43 sentinel kernel: io scheduler cfq registered (default)
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
    Jul 28 06:47:43 sentinel kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jul 28 06:47:43 sentinel kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jul 28 06:47:43 sentinel kernel: vesafb: mode is 1280x800x32, linelength=5120, pages=0
    Jul 28 06:47:43 sentinel kernel: vesafb: scrolling: redraw
    Jul 28 06:47:43 sentinel kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Jul 28 06:47:43 sentinel kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 4032k, total 4032k
    Jul 28 06:47:43 sentinel kernel: Console: switching to colour frame buffer device 160x50
    Jul 28 06:47:43 sentinel kernel: fb0: VESA VGA frame buffer device
    Jul 28 06:47:43 sentinel kernel: intel_idle: does not run on family 6 model 15
    Jul 28 06:47:43 sentinel kernel: GHES: HEST is not enabled!
    Jul 28 06:47:43 sentinel kernel: isapnp: Scanning for PnP cards...
    Jul 28 06:47:43 sentinel kernel: isapnp: No Plug & Play device found
    Jul 28 06:47:43 sentinel kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: RTC can wake from S4
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    Jul 28 06:47:43 sentinel kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Jul 28 06:47:43 sentinel kernel: TCP: cubic registered
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 10
    Jul 28 06:47:43 sentinel kernel: NET: Registered protocol family 17
    Jul 28 06:47:43 sentinel kernel: Using IPI No-Shortcut mode
    Jul 28 06:47:43 sentinel kernel: registered taskstats version 1
    Jul 28 06:47:43 sentinel kernel: Magic number: 6:931:256
    Jul 28 06:47:43 sentinel kernel: rtc_cmos 00:06: setting system clock to 2014-07-28 01:17:37 UTC (1406510257)
    Jul 28 06:47:43 sentinel kernel: PM: Hibernation image not present or could not be loaded.
    Jul 28 06:47:43 sentinel kernel: Freeing unused kernel memory: 568K (c160f000 - c169d000)
    Jul 28 06:47:43 sentinel kernel: Write protecting the kernel text: 4448k
    Jul 28 06:47:43 sentinel kernel: Write protecting the kernel read-only data: 1284k
    Jul 28 06:47:43 sentinel kernel: random: systemd-tmpfile urandom read with 0 bits of entropy available
    Jul 28 06:47:43 sentinel systemd-udevd[47]: starting version 215
    Jul 28 06:47:43 sentinel kernel: ACPI: bus type USB registered
    Jul 28 06:47:43 sentinel kernel: usbcore: registered new interface driver usbfs
    Jul 28 06:47:43 sentinel kernel: usbcore: registered new interface driver hub
    Jul 28 06:47:43 sentinel kernel: usbcore: registered new device driver usb
    Jul 28 06:47:43 sentinel kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jul 28 06:47:43 sentinel kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jul 28 06:47:43 sentinel kernel: ehci-pci: EHCI PCI platform driver
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    Jul 28 06:47:43 sentinel kernel: SCSI subsystem initialized
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: debug port 1
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: irq 18, io mem 0xf8504000
    Jul 28 06:47:43 sentinel kernel: sdhci: Secure Digital Host Controller Interface driver
    Jul 28 06:47:43 sentinel kernel: sdhci: Copyright(c) Pierre Ossman
    Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: SDHCI controller found [1180:0822] (rev 22)
    Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Jul 28 06:47:43 sentinel kernel: sdhci-pci 0000:08:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Jul 28 06:47:43 sentinel kernel: mmc0: SDHCI controller on PCI [0000:08:06.1] using DMA
    Jul 28 06:47:43 sentinel kernel: libata version 3.00 loaded.
    Jul 28 06:47:43 sentinel kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jul 28 06:47:43 sentinel kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Jul 28 06:47:43 sentinel kernel: hub 3-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 3-0:1.0: 4 ports detected
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 1-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 2-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: debug port 1
    Jul 28 06:47:43 sentinel kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8504400
    Jul 28 06:47:43 sentinel kernel: firewire_ohci 0000:08:06.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
    Jul 28 06:47:43 sentinel kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jul 28 06:47:43 sentinel kernel: hub 4-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 4-0:1.0: 6 ports detected
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
    Jul 28 06:47:43 sentinel kernel: hub 5-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 5-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
    Jul 28 06:47:43 sentinel kernel: hub 6-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 6-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
    Jul 28 06:47:43 sentinel kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
    Jul 28 06:47:43 sentinel kernel: hub 7-0:1.0: USB hub found
    Jul 28 06:47:43 sentinel kernel: hub 7-0:1.0: 2 ports detected
    Jul 28 06:47:43 sentinel kernel: ata_piix 0000:00:1f.2: version 2.13
    Jul 28 06:47:43 sentinel kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    Jul 28 06:47:43 sentinel kernel: scsi0 : ata_piix
    Jul 28 06:47:43 sentinel kernel: scsi1 : ata_piix
    Jul 28 06:47:43 sentinel kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
    Jul 28 06:47:43 sentinel kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
    Jul 28 06:47:43 sentinel kernel: usb 4-4: new high-speed USB device number 2 using ehci-pci
    Jul 28 06:47:43 sentinel kernel: ata2.00: ATAPI: MATSHITADVD-RAM UJ-85JS, FYX4, max UDMA/66
    Jul 28 06:47:43 sentinel kernel: ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
    Jul 28 06:47:43 sentinel kernel: ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Jul 28 06:47:43 sentinel kernel: ata2.00: configured for UDMA/66
    Jul 28 06:47:43 sentinel kernel: ata1.00: configured for UDMA/100
    Jul 28 06:47:43 sentinel kernel: scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
    Jul 28 06:47:43 sentinel kernel: scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-85JS FYX4 PQ: 0 ANSI: 5
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jul 28 06:47:43 sentinel kernel: sda: sda1 sda2 sda3 sda4
    Jul 28 06:47:43 sentinel kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jul 28 06:47:43 sentinel kernel: sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    Jul 28 06:47:43 sentinel kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jul 28 06:47:43 sentinel kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jul 28 06:47:43 sentinel kernel: tsc: Refined TSC clocksource calibration: 1462.999 MHz
    Jul 28 06:47:43 sentinel kernel: firewire_core 0000:08:06.0: created device fw0: GUID 00023f79af40a4d3, S400
    Jul 28 06:47:43 sentinel kernel: Switched to clocksource tsc
    Jul 28 06:47:43 sentinel kernel: random: nonblocking pool is initialized
    Jul 28 06:47:43 sentinel kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    Jul 28 06:47:43 sentinel kernel: EXT4-fs (sda2): re-mounted. Opts: data=ordered
    Jul 28 06:47:43 sentinel systemd-journal[118]: Journal started
    -- Subject: The Journal has been started
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The system journal process has been starting up, opened the journal
    -- files for writing and is now ready to process requests.
    Jul 28 06:47:43 sentinel systemd-udevd[141]: starting version 215
    Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-1 state
    Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-2 state
    Jul 28 06:47:44 sentinel kernel: Monitor-Mwait will be used to enter C-3 state
    Jul 28 06:47:44 sentinel kernel: tsc: Marking TSC unstable due to TSC halts in idle
    Jul 28 06:47:44 sentinel kernel: ACPI: acpi_idle registered with cpuidle
    Jul 28 06:47:44 sentinel kernel: Switched to clocksource hpet
    Jul 28 06:47:44 sentinel kernel: input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    Jul 28 06:47:44 sentinel kernel: ACPI: Lid Switch [LID0]
    Jul 28 06:47:44 sentinel kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    Jul 28 06:47:44 sentinel kernel: ACPI: Power Button [PWRB]
    Jul 28 06:47:44 sentinel kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
    Jul 28 06:47:44 sentinel kernel: ACPI: Sleep Button [SLPB]
    Jul 28 06:47:44 sentinel kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    Jul 28 06:47:44 sentinel kernel: ACPI: Power Button [PWRF]
    Jul 28 06:47:44 sentinel kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Jul 28 06:47:44 sentinel kernel: wmi: Mapper loaded
    Jul 28 06:47:44 sentinel kernel: ACPI: Battery Slot [BAT1] (battery present)
    Jul 28 06:47:44 sentinel kernel: ACPI: AC Adapter [ACAD] (on-line)
    Jul 28 06:47:44 sentinel kernel: Linux agpgart interface v0.103
    Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\PMIO) (20131218/utaddress-258)
    Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
    Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:44 sentinel kernel: ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011bb (\GPIO) (20131218/utaddress-258)
    Jul 28 06:47:44 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:44 sentinel kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    Jul 28 06:47:45 sentinel kernel: agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    Jul 28 06:47:45 sentinel kernel: ACPI: Invalid active0 threshold
    Jul 28 06:47:45 sentinel kernel: thermal LNXTHERM:00: registered as thermal_zone0
    Jul 28 06:47:45 sentinel kernel: ACPI: Thermal Zone [TZ00] (44 C)
    Jul 28 06:47:45 sentinel kernel: ACPI Warning: SystemIO range 0x00001c00-0x00001c1f conflicts with OpRegion 0x00001c00-0x00001c0f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
    Jul 28 06:47:45 sentinel kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Jul 28 06:47:45 sentinel kernel: [drm] Initialized drm 1.1.0 20060810
    Jul 28 06:47:45 sentinel kernel: ideapad_laptop: timeout in read_ec_cmd
    Jul 28 06:47:45 sentinel kernel: input: Ideapad extra buttons as /devices/platform/VPC2004:00/input/input6
    Jul 28 06:47:45 sentinel kernel: cfg80211: Calling CRDA to update world regulatory domain
    Jul 28 06:47:45 sentinel kernel: pps_core: LinuxPPS API ver. 1 registered
    Jul 28 06:47:45 sentinel kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    Jul 28 06:47:45 sentinel kernel: r852: driver loaded successfully
    Jul 28 06:47:45 sentinel kernel: PTP clock support registered
    Jul 28 06:47:45 sentinel kernel: [drm] Memory usable by graphics device = 512M
    Jul 28 06:47:45 sentinel kernel: checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
    Jul 28 06:47:45 sentinel kernel: fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    Jul 28 06:47:45 sentinel kernel: Console: switching to colour dummy device 80x25
    Jul 28 06:47:45 sentinel kernel: i915 0000:00:02.0: irq 44 for MSI/MSI-X
    Jul 28 06:47:45 sentinel kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    Jul 28 06:47:45 sentinel kernel: [drm] Driver supports precise vblank timestamp query.
    Jul 28 06:47:45 sentinel kernel: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    Jul 28 06:47:45 sentinel kernel: [drm] initialized overlay support
    Jul 28 06:47:46 sentinel kernel: tg3.c:v3.136 (Jan 03, 2014)
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: Tigon3 [partno(BCM95906) rev c002] (PCI Express) MAC address 00:1b:38:98:bc:f2
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: attached PHY is 5906 (10/100Base-TX Ethernet) (WireSpeed[0], EEE[0])
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    Jul 28 06:47:46 sentinel kernel: tg3 0000:06:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    Jul 28 06:47:46 sentinel kernel: iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    Jul 28 06:47:46 sentinel kernel: iwl3945: Copyright(c) 2003-2011 Intel Corporation
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
    Jul 28 06:47:46 sentinel kernel: snd_hda_intel: unknown parameter 'vid' ignored
    Jul 28 06:47:46 sentinel kernel: snd_hda_intel: unknown parameter 'pid' ignored
    Jul 28 06:47:46 sentinel kernel: fbcon: inteldrmfb (fb0) is primary device
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
    Jul 28 06:47:46 sentinel kernel: iwl3945 0000:04:00.0: irq 45 for MSI/MSI-X
    Jul 28 06:47:46 sentinel kernel: r592: driver successfully loaded
    Jul 28 06:47:46 sentinel kernel: input: PC Speaker as /devices/platform/pcspkr/input/input7
    Jul 28 06:47:46 sentinel kernel: media: Linux media interface: v0.10
    Jul 28 06:47:46 sentinel kernel: ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    Jul 28 06:47:46 sentinel kernel: microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
    Jul 28 06:47:46 sentinel kernel: microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
    Jul 28 06:47:46 sentinel kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Jul 28 06:47:46 sentinel kernel: Adding 2000088k swap on /dev/sda3. Priority:-1 extents:1 across:2000088k FS
    Jul 28 06:47:46 sentinel kernel: iTCO_vendor_support: vendor-support=0
    Jul 28 06:47:46 sentinel systemd-udevd[152]: renamed network interface wlan0 to wlp4s0
    Jul 28 06:47:46 sentinel kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    Jul 28 06:47:46 sentinel kernel: iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    Jul 28 06:47:46 sentinel kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    Jul 28 06:47:46 sentinel kernel: Console: switching to colour frame buffer device 160x50
    Jul 28 06:47:46 sentinel kernel: i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    Jul 28 06:47:46 sentinel kernel: i915 0000:00:02.0: registered panic notifier
    Jul 28 06:47:46 sentinel kernel: Linux video capture interface: v2.00
    Jul 28 06:47:46 sentinel systemd-udevd[148]: renamed network interface eth0 to enp6s0
    Jul 28 06:47:46 sentinel kernel: ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    Jul 28 06:47:46 sentinel kernel: ideapad_laptop: timeout in write_ec_cmd
    Jul 28 06:47:46 sentinel kernel: acpi device:09: registered as cooling_device2
    Jul 28 06:47:46 sentinel kernel: input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
    Jul 28 06:47:46 sentinel kernel: [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    Jul 28 06:47:46 sentinel kernel: snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    Jul 28 06:47:47 sentinel kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
    Jul 28 06:47:47 sentinel kernel: uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008)
    Jul 28 06:47:47 sentinel kernel: input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input11
    Jul 28 06:47:47 sentinel kernel: usbcore: registered new interface driver uvcvideo
    Jul 28 06:47:47 sentinel kernel: USB Video Class driver (1.1.1)
    Jul 28 06:47:47 sentinel kernel: input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    Jul 28 06:47:47 sentinel kernel: input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    Jul 28 06:47:47 sentinel systemd-fsck[178]: /dev/sda4: recovering journal
    Jul 28 06:47:47 sentinel kernel: input: ALPS PS/2 Device as /devices/platform/i8042/serio1/input/input12
    Jul 28 06:47:47 sentinel kernel: input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
    Jul 28 06:47:47 sentinel kernel: mousedev: PS/2 mouse device common for all mice
    Jul 28 06:47:47 sentinel kernel: usb 1-2: new full-speed USB device number 2 using uhci_hcd
    Jul 28 06:47:48 sentinel systemd-fsck[178]: /dev/sda4 contains a file system with errors, check forced.
    Jul 28 06:47:48 sentinel kernel: Bluetooth: Core ver 2.18
    Jul 28 06:47:48 sentinel kernel: NET: Registered protocol family 31
    Jul 28 06:47:48 sentinel kernel: Bluetooth: HCI device and connection manager initialized
    Jul 28 06:47:48 sentinel kernel: Bluetooth: HCI socket layer initialized
    Jul 28 06:47:48 sentinel kernel: Bluetooth: L2CAP socket layer initialized
    Jul 28 06:47:48 sentinel kernel: Bluetooth: SCO socket layer initialized
    Jul 28 06:47:48 sentinel kernel: usbcore: registered new interface driver btusb
    Jul 28 06:47:48 sentinel kernel: hda-codec: out of range cmd 1:a:100:fffffffe
    Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: Inode 2753367, i_blocks is 1552, should be 1536. FIXED.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: Inodes that were part of a corrupted orphan linked list found.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: /dev/sda4: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: (i.e., without -a or -p options)
    Jul 28 06:47:50 sentinel systemd-fsck[178]: fsck failed with error code 4.
    Jul 28 06:47:50 sentinel systemd-fsck[178]: Running request emergency.target/start/replace
    Jul 28 06:47:50 sentinel kernel: EXT4-fs (sda4): warning: mounting fs with errors, running e2fsck is recommended
    Jul 28 06:47:50 sentinel kernel: EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
    Jul 28 06:47:51 sentinel systemd-journal[118]: Permanent journal is using 520.1M (max allowed 2.8G, trying to leave 354.1M free of 18.5G available → current limit 2.8G).
    Jul 28 06:47:51 sentinel systemd-journal[118]: Time spent on flushing to /var is 509.727ms for 733 entries.
    Jul 28 06:47:50 sentinel systemd[203]: Failed at step EXEC spawning /bin/plymouth: No such file or directory
    -- Subject: Process /bin/plymouth could not be executed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- The process /bin/plymouth could not be executed and failed.
    -- The error number returned while executing this process is 2.
    Jul 28 06:48:05 sentinel dbus[241]: [system] Successfully activated service 'org.freedesktop.systemd1'
    Jul 28 06:48:05 sentinel systemd-logind[240]: New seat seat0.
    -- Subject: A new seat seat0 is now available
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/multiseat
    -- A new seat seat0 has been configured and is now available.
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event4 (Power Button)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event7 (Video Bus)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event2 (Power Button)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /dev/input/event1 (Lid Switch)
    Jul 28 06:48:05 sentinel systemd-logind[240]: Watching system buttons on /

    I'm not a hardware person, but I doubt it can be repaired.
    You might put it in a USB enclosure and try to access the data from another computer. Some have had luck with this treatment.
    -Jerry

  • Upgrade to 3.13.4-1 causes drm error message

    Before the recent update to kernel 3.13.4-1 to accommodate modular keyboard support, I didn't have any error messages printing at boot time. Now drm is complaining:
    dmesg | grep drm
    [ 0.651849] [drm] Initialized drm 1.1.0 20060810
    [ 0.678595] [drm] Memory usable by graphics device = 2048M
    [ 0.678602] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 0.781919] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 0.781922] [drm] Driver supports precise vblank timestamp query.
    [ 0.878594] [drm] Wrong MCH_SSKPD value: 0x16040307
    [ 0.878597] [drm] This can cause pipe underruns and display issues.
    [ 0.878598] [drm] Please upgrade your BIOS to fix this.
    [ 0.894216] fbcon: inteldrmfb (fb0) is primary device
    [ 2.348167] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 2.381521] [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up
    [ 3.077032] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 3.105865] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    I'm running on an ASUS UX31E, so I have i915.i915_enable_rc6=1 in my kernel line.

    I'm pretty sure my original upgrade was from 3.12.
    I just upgraded to 3.13.6 today, and now I'm experiencing crashing sometimes when xscreensaver starts (it was while watching a youtube video; my window manager is XMonad, which also crashed; I killed X from another tty and it automatically came back to my lightdm login). This crashing was happening pre-3.12 as well, but went away with 3.12 and also wasn't there with 3.13.{4,5}.
    My guess is the xf86-video-intel package sucks and isn't keeping up with changes to the kernel.

  • Several errors of the form [drm:.... ] *ERROR*, especially checksum

    Hello to all,
    I am new to Arch Linux and not that experienced in Linux. But I want to learn more. In fact, I have learned a lot since I switched from Fedora to Arch.
    I will straight away go to my problem:
    As indicated in the subject, I have noticed several errors concerning [drm:....] this morning when I booted and checked my system with journalctl -b.
    I do not know how long these errors are there because I yesterday used journalctl for the first time.
    Here is the result of journalctl -b:
    -- Logs begin at Mi 2013-03-13 19:24:10 CET, end at Fr 2013-05-17 10:19:37 CEST. --
    Mai 17 08:07:45 Nathan systemd-journal[113]: Allowing runtime journal files to grow to 193.3M.
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys cpuset
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys cpu
    Mai 17 08:07:45 Nathan kernel: Linux version 3.9.2-1-ARCH (nobody@thomas) (gcc version 4.8.0 20130502 (prerelease) (GCC) ) #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013
    Mai 17 08:07:45 Nathan kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=65820d33-ca90-4ed3-9b9e-e26a75f9331f ro quiet
    Mai 17 08:07:45 Nathan kernel: e820: BIOS-provided physical RAM map:
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000008dfff] usable
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000000008e000-0x000000000008ffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000000090000-0x000000000009fbff] usable
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000000009fc00-0x00000000000fffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000040200000-0x000000008ad33fff] usable
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008ad34000-0x000000008ad5efff] ACPI NVS
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008ad5f000-0x000000008afa1fff] ACPI data
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008afa2000-0x000000008affefff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008afff000-0x000000008affffff] ACPI data
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x000000008b000000-0x000000008f9fffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
    Mai 17 08:07:45 Nathan kernel: BIOS-e820: [mem 0x0000000100000000-0x000000016fdfffff] usable
    Mai 17 08:07:45 Nathan kernel: NX (Execute Disable) protection: active
    Mai 17 08:07:45 Nathan kernel: SMBIOS 2.4 present.
    Mai 17 08:07:45 Nathan kernel: DMI: Apple Inc. MacBookAir4,2/Mac-742912EFDBEE19B3, BIOS MBA41.88Z.0077.B0F.1201241549 01/24/2012
    Mai 17 08:07:45 Nathan kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Mai 17 08:07:45 Nathan kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Mai 17 08:07:45 Nathan kernel: No AGP bridge found
    Mai 17 08:07:45 Nathan kernel: e820: last_pfn = 0x16fe00 max_arch_pfn = 0x400000000
    Mai 17 08:07:45 Nathan kernel: MTRR default type: write-back
    Mai 17 08:07:45 Nathan kernel: MTRR fixed ranges enabled:
    Mai 17 08:07:45 Nathan kernel: 00000-9FFFF write-back
    Mai 17 08:07:45 Nathan kernel: A0000-BFFFF uncachable
    Mai 17 08:07:45 Nathan kernel: C0000-DFFFF write-protect
    Mai 17 08:07:45 Nathan kernel: E0000-FFFFF uncachable
    Mai 17 08:07:45 Nathan kernel: MTRR variable ranges enabled:
    Mai 17 08:07:45 Nathan kernel: 0 base 0C0000000 mask FC0000000 uncachable
    Mai 17 08:07:45 Nathan kernel: 1 base 0A0000000 mask FE0000000 uncachable
    Mai 17 08:07:45 Nathan kernel: 2 base 090000000 mask FF0000000 uncachable
    Mai 17 08:07:45 Nathan kernel: 3 base 08C000000 mask FFC000000 uncachable
    Mai 17 08:07:45 Nathan kernel: 4 base 08B800000 mask FFF800000 uncachable
    Mai 17 08:07:45 Nathan kernel: 5 disabled
    Mai 17 08:07:45 Nathan kernel: 6 disabled
    Mai 17 08:07:45 Nathan kernel: 7 disabled
    Mai 17 08:07:45 Nathan kernel: 8 disabled
    Mai 17 08:07:45 Nathan kernel: 9 disabled
    Mai 17 08:07:45 Nathan kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Mai 17 08:07:45 Nathan kernel: e820: last_pfn = 0x8ad34 max_arch_pfn = 0x400000000
    Mai 17 08:07:45 Nathan kernel: Scanning 1 areas for low memory corruption
    Mai 17 08:07:45 Nathan kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Mai 17 08:07:45 Nathan kernel: reserving inaccessible SNB gfx pages
    Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Mai 17 08:07:45 Nathan kernel: [mem 0x00000000-0x000fffff] page 4k
    Mai 17 08:07:45 Nathan kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
    Mai 17 08:07:45 Nathan kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
    Mai 17 08:07:45 Nathan kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
    Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x16fc00000-0x16fdfffff]
    Mai 17 08:07:45 Nathan kernel: [mem 0x16fc00000-0x16fdfffff] page 2M
    Mai 17 08:07:45 Nathan kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
    Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x16c000000-0x16fbfffff]
    Mai 17 08:07:45 Nathan kernel: [mem 0x16c000000-0x16fbfffff] page 2M
    Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x100000000-0x16bffffff]
    Mai 17 08:07:45 Nathan kernel: [mem 0x100000000-0x16bffffff] page 2M
    Mai 17 08:07:45 Nathan kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
    Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x00100000-0x1fffffff]
    Mai 17 08:07:45 Nathan kernel: [mem 0x00100000-0x001fffff] page 4k
    Mai 17 08:07:45 Nathan kernel: [mem 0x00200000-0x1fffffff] page 2M
    Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x20200000-0x3fffffff]
    Mai 17 08:07:45 Nathan kernel: [mem 0x20200000-0x3fffffff] page 2M
    Mai 17 08:07:45 Nathan kernel: init_memory_mapping: [mem 0x40200000-0x8ad33fff]
    Mai 17 08:07:45 Nathan kernel: [mem 0x40200000-0x8abfffff] page 2M
    Mai 17 08:07:45 Nathan kernel: [mem 0x8ac00000-0x8ad33fff] page 4k
    Mai 17 08:07:45 Nathan kernel: RAMDISK: [mem 0x37a56000-0x37d22fff]
    Mai 17 08:07:45 Nathan kernel: ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
    Mai 17 08:07:45 Nathan kernel: ACPI: XSDT 000000008ad8e1c0 000AC (v01 APPLE Apple00 00000060 01000013)
    Mai 17 08:07:45 Nathan kernel: ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00 00000060 Loki 0000005F)
    Mai 17 08:07:45 Nathan kernel: ACPI: DSDT 000000008ad81000 05050 (v01 APPLE MacBookA 00040001 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: FACS 000000008ad3e000 00040
    Mai 17 08:07:45 Nathan kernel: ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    Mai 17 08:07:45 Nathan kernel: ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
    Mai 17 08:07:45 Nathan kernel: ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    Mai 17 08:07:45 Nathan kernel: ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7d000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7b000 006CA (v01 APPLE UsbSD 00001000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad72000 00506 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad71000 009B1 (v01 PmRef CpuPm 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad70000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad6f000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad80000 000FA (v01 SataRe SataPri 00001000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7f000 000D0 (v01 SataRe SataSec 00001000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad7e000 00032 (v01 Apple SsdtS3 00001000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: Local APIC address 0xfee00000
    Mai 17 08:07:45 Nathan kernel: No NUMA configuration found
    Mai 17 08:07:45 Nathan kernel: Faking a node at [mem 0x0000000000000000-0x000000016fdfffff]
    Mai 17 08:07:45 Nathan kernel: Initmem setup node 0 [mem 0x00000000-0x16fdfffff]
    Mai 17 08:07:45 Nathan kernel: NODE_DATA [mem 0x16fdf8000-0x16fdfcfff]
    Mai 17 08:07:45 Nathan kernel: [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff88016b400000-ffff88016f3fffff] on node 0
    Mai 17 08:07:45 Nathan kernel: Zone ranges:
    Mai 17 08:07:45 Nathan kernel: DMA [mem 0x00001000-0x00ffffff]
    Mai 17 08:07:45 Nathan kernel: DMA32 [mem 0x01000000-0xffffffff]
    Mai 17 08:07:45 Nathan kernel: Normal [mem 0x100000000-0x16fdfffff]
    Mai 17 08:07:45 Nathan kernel: Movable zone start for each node
    Mai 17 08:07:45 Nathan kernel: Early memory node ranges
    Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x00001000-0x0008dfff]
    Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x00090000-0x0009efff]
    Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x00100000-0x1fffffff]
    Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x20200000-0x3fffffff]
    Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x40200000-0x8ad33fff]
    Mai 17 08:07:45 Nathan kernel: node 0: [mem 0x100000000-0x16fdfffff]
    Mai 17 08:07:45 Nathan kernel: On node 0 totalpages: 1025744
    Mai 17 08:07:45 Nathan kernel: DMA zone: 64 pages used for memmap
    Mai 17 08:07:45 Nathan kernel: DMA zone: 156 pages reserved
    Mai 17 08:07:45 Nathan kernel: DMA zone: 3996 pages, LIFO batch:0
    Mai 17 08:07:45 Nathan kernel: DMA32 zone: 8805 pages used for memmap
    Mai 17 08:07:45 Nathan kernel: DMA32 zone: 563508 pages, LIFO batch:31
    Mai 17 08:07:45 Nathan kernel: Normal zone: 7160 pages used for memmap
    Mai 17 08:07:45 Nathan kernel: Normal zone: 458240 pages, LIFO batch:31
    Mai 17 08:07:45 Nathan kernel: ACPI: PM-Timer IO Port: 0x408
    Mai 17 08:07:45 Nathan kernel: ACPI: Local APIC address 0xfee00000
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
    Mai 17 08:07:45 Nathan kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    Mai 17 08:07:45 Nathan kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    Mai 17 08:07:45 Nathan kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Mai 17 08:07:45 Nathan kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Mai 17 08:07:45 Nathan kernel: ACPI: IRQ0 used by override.
    Mai 17 08:07:45 Nathan kernel: ACPI: IRQ2 used by override.
    Mai 17 08:07:45 Nathan kernel: ACPI: IRQ9 used by override.
    Mai 17 08:07:45 Nathan kernel: Using ACPI (MADT) for SMP configuration information
    Mai 17 08:07:45 Nathan kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Mai 17 08:07:45 Nathan kernel: smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    Mai 17 08:07:45 Nathan kernel: nr_irqs_gsi: 40
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000000008e000 - 0000000000090000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 0000000040000000 - 0000000040200000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008ad34000 - 000000008ad5f000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008ad5f000 - 000000008afa2000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008afa2000 - 000000008afff000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008afff000 - 000000008b000000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008b000000 - 000000008fa00000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 000000008fa00000 - 00000000e0000000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed04000 - 00000000fed10000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
    Mai 17 08:07:45 Nathan kernel: PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
    Mai 17 08:07:45 Nathan kernel: e820: [mem 0x8fa00000-0xdfffffff] available for PCI devices
    Mai 17 08:07:45 Nathan kernel: Booting paravirtualized kernel on bare hardware
    Mai 17 08:07:45 Nathan kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    Mai 17 08:07:45 Nathan kernel: PERCPU: Embedded 28 pages/cpu @ffff88016fa00000 s85824 r8192 d20672 u262144
    Mai 17 08:07:45 Nathan kernel: pcpu-alloc: s85824 r8192 d20672 u262144 alloc=1*2097152
    Mai 17 08:07:45 Nathan kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    Mai 17 08:07:45 Nathan kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1009559
    Mai 17 08:07:45 Nathan kernel: Policy zone: Normal
    Mai 17 08:07:45 Nathan kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=65820d33-ca90-4ed3-9b9e-e26a75f9331f ro quiet
    Mai 17 08:07:45 Nathan kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Mai 17 08:07:45 Nathan kernel: __ex_table already sorted, skipping sort
    Mai 17 08:07:45 Nathan kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340
    Mai 17 08:07:45 Nathan kernel: Checking aperture...
    Mai 17 08:07:45 Nathan kernel: No AGP bridge found
    Mai 17 08:07:45 Nathan kernel: Calgary: detecting Calgary via BIOS EBDA area
    Mai 17 08:07:45 Nathan kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Mai 17 08:07:45 Nathan kernel: Memory: 3955240k/6027264k available (4981k kernel code, 1924288k absent, 147736k reserved, 3968k data, 1092k init)
    Mai 17 08:07:45 Nathan kernel: SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    Mai 17 08:07:45 Nathan kernel: Preemptible hierarchical RCU implementation.
    Mai 17 08:07:45 Nathan kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Mai 17 08:07:45 Nathan kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Mai 17 08:07:45 Nathan kernel: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    Mai 17 08:07:45 Nathan kernel: NR_IRQS:4352 nr_irqs:744 16
    Mai 17 08:07:45 Nathan kernel: Console: colour dummy device 80x25
    Mai 17 08:07:45 Nathan kernel: console [tty0] enabled
    Mai 17 08:07:45 Nathan kernel: allocated 16777216 bytes of page_cgroup
    Mai 17 08:07:45 Nathan kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Mai 17 08:07:45 Nathan kernel: hpet clockevent registered
    Mai 17 08:07:45 Nathan kernel: tsc: Fast TSC calibration using PIT
    Mai 17 08:07:45 Nathan kernel: tsc: Detected 1699.863 MHz processor
    Mai 17 08:07:45 Nathan kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3401.38 BogoMIPS (lpj=5666210)
    Mai 17 08:07:45 Nathan kernel: pid_max: default: 32768 minimum: 301
    Mai 17 08:07:45 Nathan kernel: Security Framework initialized
    Mai 17 08:07:45 Nathan kernel: AppArmor: AppArmor disabled by boot time parameter
    Mai 17 08:07:45 Nathan kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Mai 17 08:07:45 Nathan kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mai 17 08:07:45 Nathan kernel: Mount-cache hash table entries: 256
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys cpuacct
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys memory
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys devices
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys freezer
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys net_cls
    Mai 17 08:07:45 Nathan kernel: Initializing cgroup subsys blkio
    Mai 17 08:07:45 Nathan kernel: CPU: Physical Processor ID: 0
    Mai 17 08:07:45 Nathan kernel: CPU: Processor Core ID: 0
    Mai 17 08:07:45 Nathan kernel: mce: CPU supports 7 MCE banks
    Mai 17 08:07:45 Nathan kernel: CPU0: Thermal monitoring enabled (TM1)
    Mai 17 08:07:45 Nathan kernel: [117B blob data]
    Mai 17 08:07:45 Nathan kernel: Freeing SMP alternatives: 20k freed
    Mai 17 08:07:45 Nathan kernel: ACPI: Core revision 20130117
    Mai 17 08:07:45 Nathan kernel: ACPI: All ACPI Tables successfully acquired
    Mai 17 08:07:45 Nathan kernel: ftrace: allocating 19539 entries in 77 pages
    Mai 17 08:07:45 Nathan kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Mai 17 08:07:45 Nathan kernel: smpboot: CPU0: Intel(R) Core(TM) i5-2557M CPU @ 1.70GHz (fam: 06, model: 2a, stepping: 07)
    Mai 17 08:07:45 Nathan kernel: TSC deadline timer enabled
    Mai 17 08:07:45 Nathan kernel: Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    Mai 17 08:07:45 Nathan kernel: perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    Mai 17 08:07:45 Nathan kernel: ... version: 3
    Mai 17 08:07:45 Nathan kernel: ... bit width: 48
    Mai 17 08:07:45 Nathan kernel: ... generic registers: 4
    Mai 17 08:07:45 Nathan kernel: ... value mask: 0000ffffffffffff
    Mai 17 08:07:45 Nathan kernel: ... max period: 000000007fffffff
    Mai 17 08:07:45 Nathan kernel: ... fixed-purpose events: 3
    Mai 17 08:07:45 Nathan kernel: ... event mask: 000000070000000f
    Mai 17 08:07:45 Nathan kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Mai 17 08:07:45 Nathan kernel: smpboot: Booting Node 0, Processors #1 #2 #3
    Mai 17 08:07:45 Nathan kernel: Brought up 4 CPUs
    Mai 17 08:07:45 Nathan kernel: smpboot: Total of 4 processors activated (13604.52 BogoMIPS)
    Mai 17 08:07:45 Nathan kernel: devtmpfs: initialized
    Mai 17 08:07:45 Nathan kernel: PM: Registering ACPI NVS region [mem 0x8ad34000-0x8ad5efff] (176128 bytes)
    Mai 17 08:07:45 Nathan kernel: RTC time: 6:07:41, date: 05/17/13
    Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 16
    Mai 17 08:07:45 Nathan kernel: ACPI: bus type PCI registered
    Mai 17 08:07:45 Nathan kernel: PCI: MMCONFIG for domain 0000 [bus 00-97] at [mem 0xe0000000-0xe97fffff] (base 0xe0000000)
    Mai 17 08:07:45 Nathan kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe97fffff] reserved in E820
    Mai 17 08:07:45 Nathan kernel: PCI: Using configuration type 1 for base access
    Mai 17 08:07:45 Nathan kernel: bio: create slab <bio-0> at 0
    Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(Module Device)
    Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(Processor Device)
    Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Mai 17 08:07:45 Nathan kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Mai 17 08:07:45 Nathan kernel: ACPI: EC: EC description table is found, configuring boot EC
    Mai 17 08:07:45 Nathan kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad39190 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: Dynamic OEM Table Load:
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT (null) 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad3a710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: Dynamic OEM Table Load:
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT 000000008ad38d90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: Dynamic OEM Table Load:
    Mai 17 08:07:45 Nathan kernel: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
    Mai 17 08:07:45 Nathan kernel: ACPI: Interpreter enabled
    Mai 17 08:07:45 Nathan kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
    Mai 17 08:07:45 Nathan kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
    Mai 17 08:07:45 Nathan kernel: ACPI: (supports S0 S3 S4 S5)
    Mai 17 08:07:45 Nathan kernel: ACPI: Using IOAPIC for interrupt routing
    Mai 17 08:07:45 Nathan kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Mai 17 08:07:45 Nathan kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-97] only partially covers this bridge
    Mai 17 08:07:45 Nathan kernel: PCI host bridge to bus 0000:00
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [mem 0x8fa00000-0xfeafffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: reg 10: [mem 0xa0000000-0xa03fffff 64bit]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: reg 18: [mem 0x90000000-0x9fffffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: reg 20: [io 0x2000-0x203f]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:16.0: reg 10: [mem 0xa0607100-0xa060710f 64bit]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.0: [8086:1c2c] type 00 class 0x0c0300
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.0: reg 20: [io 0x2140-0x215f]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: [8086:1c2d] type 00 class 0x0c0320
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: reg 10: [mem 0xa0606c00-0xa0606fff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1a.7: System wakeup disabled by ACPI
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: reg 10: [mem 0xa0600000-0xa0603fff 64bit]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1b.0: System wakeup disabled by ACPI
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.0: [8086:1c27] type 00 class 0x0c0300
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.0: reg 20: [io 0x20e0-0x20ff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: [8086:1c26] type 00 class 0x0c0320
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: reg 10: [mem 0xa0606800-0xa0606bff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.0: [8086:1c4d] type 00 class 0x060100
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: [8086:1c01] type 00 class 0x01018f
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 10: [io 0x2168-0x216f]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 14: [io 0x217c-0x217f]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 18: [io 0x2160-0x2167]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 1c: [io 0x2178-0x217b]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 20: [io 0x2060-0x206f]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.2: reg 24: [io 0xffe0-0xffef]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.3: reg 10: [mem 0xa0607000-0xa06070ff 64bit]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: [8086:151a] type 01 class 0x060400
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: supports D1 D2
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: PCI bridge to [bus 03-97]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa0700000-0xa49fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa4a00000-0xa89fffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: [8086:151a] type 01 class 0x060400
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: supports D1 D2
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: [8086:151a] type 01 class 0x060400
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: supports D1 D2
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: [8086:151a] type 01 class 0x060400
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: supports D1 D2
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: PCI bridge to [bus 04-67]
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0xa0700000-0xa09fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: [8086:151a] type 00 class 0x088000
    Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: reg 10: [mem 0xa0700000-0xa073ffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: reg 14: [mem 0xa0740000-0xa0740fff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: supports D1 D2
    Mai 17 08:07:45 Nathan kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: PCI bridge to [bus 05]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: bridge window [mem 0xa0700000-0xa07fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: PCI bridge to [bus 06-36]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0xa0800000-0xa08fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: PCI bridge to [bus 37-67]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0xa0900000-0xa09fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: [14e4:4353] type 00 class 0x028000
    Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: reg 10: [mem 0xa0400000-0xa0403fff 64bit]
    Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: supports D1 D2
    Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    Mai 17 08:07:45 Nathan kernel: pci 0000:02:00.0: System wakeup disabled by ACPI
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
    Mai 17 08:07:45 Nathan kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    Mai 17 08:07:45 Nathan kernel: acpi PNP0A08:00: ACPI _OSC control (0x19) granted
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    Mai 17 08:07:45 Nathan kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Mai 17 08:07:45 Nathan kernel: ACPI: Enabled 3 GPEs in block 00 to 3F
    Mai 17 08:07:45 Nathan kernel: acpi root: \_SB_.PCI0 notify handler is installed
    Mai 17 08:07:45 Nathan kernel: Found 1 acpi root devices
    Mai 17 08:07:45 Nathan kernel: ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    Mai 17 08:07:45 Nathan kernel: ACPI: No dock devices found.
    Mai 17 08:07:45 Nathan kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Mai 17 08:07:45 Nathan kernel: vgaarb: loaded
    Mai 17 08:07:45 Nathan kernel: vgaarb: bridge control possible 0000:00:02.0
    Mai 17 08:07:45 Nathan kernel: PCI: Using ACPI for IRQ routing
    Mai 17 08:07:45 Nathan kernel: PCI: pci_cache_line_size set to 64 bytes
    Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x0008e000-0x0008ffff]
    Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x8ad34000-0x8bffffff]
    Mai 17 08:07:45 Nathan kernel: e820: reserve RAM buffer [mem 0x16fe00000-0x16fffffff]
    Mai 17 08:07:45 Nathan kernel: NetLabel: Initializing
    Mai 17 08:07:45 Nathan kernel: NetLabel: domain hash size = 128
    Mai 17 08:07:45 Nathan kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Mai 17 08:07:45 Nathan kernel: NetLabel: unlabeled traffic allowed by default
    Mai 17 08:07:45 Nathan kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    Mai 17 08:07:45 Nathan kernel: hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    Mai 17 08:07:45 Nathan kernel: Switching to clocksource hpet
    Mai 17 08:07:45 Nathan kernel: pnp: PnP ACPI init
    Mai 17 08:07:45 Nathan kernel: ACPI: bus type PNP registered
    Mai 17 08:07:45 Nathan kernel: pnp 00:00: [dma 4]
    Mai 17 08:07:45 Nathan kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    Mai 17 08:07:45 Nathan kernel: pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    Mai 17 08:07:45 Nathan kernel: system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    Mai 17 08:07:45 Nathan kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    Mai 17 08:07:45 Nathan kernel: system 00:04: [io 0x1000-0x100f] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:04: [io 0x0400-0x047f] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:04: [io 0x0500-0x057f] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    Mai 17 08:07:45 Nathan kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    Mai 17 08:07:45 Nathan kernel: pnp 00:06: Plug and Play ACPI device, IDs APP0001 (active)
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed10000-0xfed17fff] could not be reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    Mai 17 08:07:45 Nathan kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    Mai 17 08:07:45 Nathan kernel: system 00:08: [mem 0x20000000-0x201fffff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:08: [mem 0x40000000-0x401fffff] has been reserved
    Mai 17 08:07:45 Nathan kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
    Mai 17 08:07:45 Nathan kernel: pnp: PnP ACPI: found 9 devices
    Mai 17 08:07:45 Nathan kernel: ACPI: bus type PNP unregistered
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [io 0x1000-0x0fff] to [bus 06-36] add_size 1000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-36] add_size 200000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [io 0x1000-0x0fff] to [bus 37-67] add_size 1000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 37-67] add_size 200000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04-67] add_size 2000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-67] add_size 400000
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 400000
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 2000
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 15: assigned [mem 0xa4a00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 13: can't assign io (size 0x2000)
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 15: assigned [mem 0xa4a00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: BAR 13: can't assign io (size 0x2000)
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 15: assigned [mem 0xa4a00000-0xa4bfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 15: assigned [mem 0xa4c00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 13: can't assign io (size 0x1000)
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 13: can't assign io (size 0x1000)
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 15: assigned [mem 0xa4a00000-0xa4bfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: BAR 13: can't assign io (size 0x1000)
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 15: assigned [mem 0xa4c00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: BAR 13: can't assign io (size 0x1000)
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: PCI bridge to [bus 05]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:00.0: bridge window [mem 0xa0700000-0xa07fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: PCI bridge to [bus 06-36]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0xa0800000-0xa08fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: bridge window [mem 0xa4c00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: PCI bridge to [bus 37-67]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0xa0900000-0xa09fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: bridge window [mem 0xa4a00000-0xa4bfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: PCI bridge to [bus 04-67]
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0xa0700000-0xa09fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:03:00.0: bridge window [mem 0xa4a00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: PCI bridge to [bus 03-97]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa0700000-0xa49fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:01.0: bridge window [mem 0xa4a00000-0xa89fffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: PCI bridge to [bus 01]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: PCI bridge to [bus 02]
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:03.0: enabling device (0000 -> 0002)
    Mai 17 08:07:45 Nathan kernel: pci 0000:04:04.0: enabling device (0000 -> 0002)
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:1c.0: enabling device (0000 -> 0002)
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 7 [mem 0x8fa00000-0xfeafffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:03: resource 1 [mem 0xa0700000-0xa49fffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:03: resource 2 [mem 0xa4a00000-0xa89fffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:04: resource 1 [mem 0xa0700000-0xa09fffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:04: resource 2 [mem 0xa4a00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:05: resource 1 [mem 0xa0700000-0xa07fffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:06: resource 1 [mem 0xa0800000-0xa08fffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:06: resource 2 [mem 0xa4c00000-0xa4dfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:37: resource 1 [mem 0xa0900000-0xa09fffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:37: resource 2 [mem 0xa4a00000-0xa4bfffff 64bit pref]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:01: resource 1 [mem 0xa0500000-0xa05fffff]
    Mai 17 08:07:45 Nathan kernel: pci_bus 0000:02: resource 1 [mem 0xa0400000-0xa04fffff]
    Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 2
    Mai 17 08:07:45 Nathan kernel: TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    Mai 17 08:07:45 Nathan kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    Mai 17 08:07:45 Nathan kernel: TCP: Hash tables configured (established 32768 bind 32768)
    Mai 17 08:07:45 Nathan kernel: TCP: reno registered
    Mai 17 08:07:45 Nathan kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
    Mai 17 08:07:45 Nathan kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 1
    Mai 17 08:07:45 Nathan kernel: pci 0000:00:02.0: Boot video device
    Mai 17 08:07:45 Nathan kernel: PCI: CLS 256 bytes, default 64
    Mai 17 08:07:45 Nathan kernel: Unpacking initramfs...
    Mai 17 08:07:45 Nathan kernel: Freeing initrd memory: 2868k freed
    Mai 17 08:07:45 Nathan kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Mai 17 08:07:45 Nathan kernel: software IO TLB [mem 0x86d34000-0x8ad34000] (64MB) mapped at [ffff880086d34000-ffff88008ad33fff]
    Mai 17 08:07:45 Nathan kernel: Scanning for low memory corruption every 60 seconds
    Mai 17 08:07:45 Nathan kernel: audit: initializing netlink socket (disabled)
    Mai 17 08:07:45 Nathan kernel: type=2000 audit(1368770861.326:1): initialized
    Mai 17 08:07:45 Nathan kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Mai 17 08:07:45 Nathan kernel: VFS: Disk quotas dquot_6.5.2
    Mai 17 08:07:45 Nathan kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Mai 17 08:07:45 Nathan kernel: msgmni has been set to 7730
    Mai 17 08:07:45 Nathan kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Mai 17 08:07:45 Nathan kernel: io scheduler noop registered
    Mai 17 08:07:45 Nathan kernel: io scheduler deadline registered
    Mai 17 08:07:45 Nathan kernel: io scheduler cfq registered (default)
    Mai 17 08:07:45 Nathan kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    Mai 17 08:07:45 Nathan kernel: pcieport 0000:03:00.0: irq 41 for MSI/MSI-X
    Mai 17 08:07:45 Nathan kernel: pcieport 0000:04:00.0: irq 42 for MSI/MSI-X
    Mai 17 08:07:45 Nathan kernel: pcieport 0000:04:03.0: irq 43 for MSI/MSI-X
    Mai 17 08:07:45 Nathan kernel: pcieport 0000:04:04.0: irq 44 for MSI/MSI-X
    Mai 17 08:07:45 Nathan kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=0
    Mai 17 08:07:45 Nathan kernel: vesafb: scrolling: redraw
    Mai 17 08:07:45 Nathan kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Mai 17 08:07:45 Nathan kernel: vesafb: framebuffer at 0x90000000, mapped to 0xffffc9000a000000, using 3072k, total 3072k
    Mai 17 08:07:45 Nathan kernel: Console: switching to colour frame buffer device 128x48
    Mai 17 08:07:45 Nathan kernel: fb0: VESA VGA frame buffer device
    Mai 17 08:07:45 Nathan kernel: intel_idle: MWAIT substates: 0x21120
    Mai 17 08:07:45 Nathan kernel: intel_idle: v0.4 model 0x2A
    Mai 17 08:07:45 Nathan kernel: intel_idle: lapic_timer_reliable_states 0xffffffff
    Mai 17 08:07:45 Nathan kernel: GHES: HEST is not enabled!
    Mai 17 08:07:45 Nathan kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Mai 17 08:07:45 Nathan kernel: Linux agpgart interface v0.103
    Mai 17 08:07:45 Nathan kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
    Mai 17 08:07:45 Nathan kernel: tsc: Refined TSC clocksource calibration: 1700.009 MHz
    Mai 17 08:07:45 Nathan kernel: Switching to clocksource tsc
    Mai 17 08:07:45 Nathan kernel: i8042: No controller found
    Mai 17 08:07:45 Nathan kernel: mousedev: PS/2 mouse device common for all mice
    Mai 17 08:07:45 Nathan kernel: rtc_cmos 00:05: RTC can wake from S4
    Mai 17 08:07:45 Nathan kernel: rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    Mai 17 08:07:45 Nathan kernel: rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    Mai 17 08:07:45 Nathan kernel: Intel P-state driver initializing.
    Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 0
    Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 1
    Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 2
    Mai 17 08:07:45 Nathan kernel: Intel pstate controlling: cpu 3
    Mai 17 08:07:45 Nathan kernel: cpuidle: using governor ladder
    Mai 17 08:07:45 Nathan kernel: cpuidle: using governor menu
    Mai 17 08:07:45 Nathan kernel: EFI Variables Facility v0.08 2004-May-17
    Mai 17 08:07:45 Nathan kernel: drop_monitor: Initializing network drop monitor service
    Mai 17 08:07:45 Nathan kernel: TCP: cubic registered
    Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 10
    Mai 17 08:07:45 Nathan kernel: NET: Registered protocol family 17
    Mai 17 08:07:45 Nathan kernel: Key type dns_resolver registered
    Mai 17 08:07:45 Nathan kernel: PM: Hibernation image not present or could not be loaded.
    Mai 17 08:07:45 Nathan kernel: registered taskstats version 1
    Mai 17 08:07:45 Nathan kernel: Magic number: 13:967:114
    Mai 17 08:07:45 Nathan kernel: Freeing unused kernel memory: 1092k freed
    Mai 17 08:07:45 Nathan kernel: Write protecting the kernel read-only data: 8192k
    Mai 17 08:07:45 Nathan kernel: Freeing unused kernel memory: 1152k freed
    Mai 17 08:07:45 Nathan kernel: Freeing unused kernel memory: 420k freed
    Mai 17 08:07:45 Nathan systemd-udevd[56]: starting version 203
    Mai 17 08:07:45 Nathan kernel: ACPI: bus type USB registered
    Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver usbfs
    Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver hub
    Mai 17 08:07:45 Nathan kernel: usbcore: registered new device driver usb
    Mai 17 08:07:45 Nathan kernel: SCSI subsystem initialized
    Mai 17 08:07:45 Nathan kernel: ACPI: bus type ATA registered
    Mai 17 08:07:45 Nathan kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Mai 17 08:07:45 Nathan kernel: libata version 3.00 loaded.
    Mai 17 08:07:45 Nathan kernel: ehci-pci: EHCI PCI platform driver
    Mai 17 08:07:45 Nathan kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: debug port 2
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: irq 23, io mem 0xa0606c00
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Mai 17 08:07:45 Nathan kernel: hub 1-0:1.0: USB hub found
    Mai 17 08:07:45 Nathan kernel: hub 1-0:1.0: 6 ports detected
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: debug port 2
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: irq 22, io mem 0xa0606800
    Mai 17 08:07:45 Nathan kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Mai 17 08:07:45 Nathan kernel: hub 2-0:1.0: USB hub found
    Mai 17 08:07:45 Nathan kernel: hub 2-0:1.0: 8 ports detected
    Mai 17 08:07:45 Nathan kernel: ata_piix 0000:00:1f.2: version 2.13
    Mai 17 08:07:45 Nathan kernel: ata_piix 0000:00:1f.2: MAP [
    Mai 17 08:07:45 Nathan kernel: P0 P2 P1 P3 ]
    Mai 17 08:07:45 Nathan kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
    Mai 17 08:07:45 Nathan kernel: scsi0 : ata_piix
    Mai 17 08:07:45 Nathan kernel: scsi1 : ata_piix
    Mai 17 08:07:45 Nathan kernel: ata1: SATA max UDMA/133 cmd 0x2168 ctl 0x217c bmdma 0x2060 irq 19
    Mai 17 08:07:45 Nathan kernel: ata2: SATA max UDMA/133 cmd 0x2160 ctl 0x2178 bmdma 0x2068 irq 19
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1a.0: irq 21, io base 0x00002140
    Mai 17 08:07:45 Nathan kernel: hub 3-0:1.0: USB hub found
    Mai 17 08:07:45 Nathan kernel: hub 3-0:1.0: 2 ports detected
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    Mai 17 08:07:45 Nathan kernel: uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020e0
    Mai 17 08:07:45 Nathan kernel: hub 4-0:1.0: USB hub found
    Mai 17 08:07:45 Nathan kernel: hub 4-0:1.0: 2 ports detected
    Mai 17 08:07:45 Nathan kernel: usb 1-1: new high-speed USB device number 2 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: hub 1-1:1.0: USB hub found
    Mai 17 08:07:45 Nathan kernel: hub 1-1:1.0: 3 ports detected
    Mai 17 08:07:45 Nathan kernel: usb 1-2: new high-speed USB device number 3 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: hub 2-1:1.0: USB hub found
    Mai 17 08:07:45 Nathan kernel: hub 2-1:1.0: 2 ports detected
    Mai 17 08:07:45 Nathan kernel: usb 1-1.1: new full-speed USB device number 4 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: hub 1-1.1:1.0: USB hub found
    Mai 17 08:07:45 Nathan kernel: hub 1-1.1:1.0: 3 ports detected
    Mai 17 08:07:45 Nathan kernel: usb 1-1.2: new full-speed USB device number 5 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: ata2.00: failed to resume link (SControl 0)
    Mai 17 08:07:45 Nathan kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver usbhid
    Mai 17 08:07:45 Nathan kernel: usbhid: USB HID core driver
    Mai 17 08:07:45 Nathan kernel: input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
    Mai 17 08:07:45 Nathan kernel: apple 0003:05AC:024D.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input0
    Mai 17 08:07:45 Nathan kernel: usb 2-1.1: new high-speed USB device number 3 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: apple 0003:05AC:024D.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input1
    Mai 17 08:07:45 Nathan kernel: Initializing USB Mass Storage driver...
    Mai 17 08:07:45 Nathan kernel: scsi2 : usb-storage 2-1.1:1.0
    Mai 17 08:07:45 Nathan kernel: usbcore: registered new interface driver usb-storage
    Mai 17 08:07:45 Nathan kernel: USB Mass Storage support registered.
    Mai 17 08:07:45 Nathan kernel: ata1.01: failed to resume link (SControl 0)
    Mai 17 08:07:45 Nathan kernel: usb 1-1.1.1: new full-speed USB device number 6 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Mai 17 08:07:45 Nathan kernel: ata1.01: SATA link down (SStatus 0 SControl 0)
    Mai 17 08:07:45 Nathan kernel: ata1.00: ATA-8: APPLE SSD SM128C, AXM09A1Q, max UDMA/133
    Mai 17 08:07:45 Nathan kernel: ata1.00: 236978176 sectors, multi 16: LBA48 NCQ (depth 0/32)
    Mai 17 08:07:45 Nathan kernel: usb 1-1.1.2: new full-speed USB device number 7 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: ata1.00: configured for UDMA/133
    Mai 17 08:07:45 Nathan kernel: scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM128C AXM0 PQ: 0 ANSI: 5
    Mai 17 08:07:45 Nathan kernel: usb 1-1.1.3: new full-speed USB device number 8 using ehci-pci
    Mai 17 08:07:45 Nathan kernel: ata2.01: failed to resume link (SControl 0)
    Mai 17 08:07:45 Nathan kernel: ata2.00: SATA link down (SStatus 0 SControl 0)
    Mai 17 08:07:45 Nathan kernel: ata2.01: SATA link down (SStatus 0 SControl 0)
    Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] 236978176 512-byte logical blocks: (121 GB/113 GiB)
    Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Write Protect is off
    Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Mai 17 08:07:45 Nathan kernel: sda: sda1 sda2
    Mai 17 08:07:45 Nathan kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Mai 17 08:07:45 Nathan kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Mai 17 08:07:45 Nathan systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    Mai 17 08:07:45 Nathan systemd[1]: Set hostname to <Nathan>.
    Mai 17 08:07:45 Nathan kernel: scsi 2:0:0:0: Direct-Access APPLE SD Card Reader 2.00 PQ: 0 ANSI: 0
    Mai 17 08:07:45 Nathan kernel: sd 2:0:0:0: [sdb] Attached SCSI removable disk
    Mai 17 08:07:45 Nathan systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Mai 17 08:07:45 Nathan systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Remote File Systems.
    Mai 17 08:07:45 Nathan systemd[1]: Reached target Remote File Systems.
    Mai 17 08:07:45 Nathan systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Mai 17 08:07:45 Nathan systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Device-mapper event daemon FIFOs.
    Mai 17 08:07:45 Nathan systemd[1]: Listening on Device-mapper event daemon FIFOs.
    Mai 17 08:07:45 Nathan systemd[1]: Starting LVM2 metadata daemon socket.
    Mai 17 08:07:45 Nathan systemd[1]: Listening on LVM2 metadata daemon socket.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Delayed Shutdown Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Listening on Delayed Shutdown Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Mai 17 08:07:45 Nathan systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Encrypted Volumes.
    Mai 17 08:07:45 Nathan systemd[1]: Reached target Encrypted Volumes.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Mai 17 08:07:45 Nathan systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Paths.
    Mai 17 08:07:45 Nathan systemd[1]: Reached target Paths.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Journal Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Listening on Journal Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Mounting Debug File System...
    Mai 17 08:07:45 Nathan systemd[1]: Started Set Up Additional Binary Formats.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Setup Virtual Console...
    Mai 17 08:07:45 Nathan systemd[1]: Starting Apply Kernel Variables...
    Mai 17 08:07:45 Nathan systemd[1]: Mounting Huge Pages File System...
    Mai 17 08:07:45 Nathan systemd[1]: Mounting POSIX Message Queue File System...
    Mai 17 08:07:45 Nathan systemd[1]: Starting Load Kernel Modules...
    Mai 17 08:07:45 Nathan systemd[1]: Starting Create static device nodes in /dev...
    Mai 17 08:07:45 Nathan systemd[1]: Starting Journal Service...
    Mai 17 08:07:45 Nathan systemd[1]: Started Journal Service.
    Mai 17 08:07:45 Nathan systemd[1]: Starting udev Kernel Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Listening on udev Kernel Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Starting udev Control Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Listening on udev Control Socket.
    Mai 17 08:07:45 Nathan systemd[1]: Starting udev Coldplug all Devices...
    Mai 17 08:07:45 Nathan systemd[1]: Starting Swap.
    Mai 17 08:07:45 Nathan systemd[1]: Reached target Swap.
    Mai 17 08:07:45 Nathan systemd[1]: Started File System Check on Root Device.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Remount Root and Kernel File Systems...
    Mai 17 08:07:45 Nathan systemd[1]: Mounting Temporary Directory...
    Mai 17 08:07:45 Nathan systemd[1]: Expecting device dev-disk-by\x2duuid-168d8e59\x2db7eb\x2d4af3\x2da286\x2dddb662307a59.device...
    Mai 17 08:07:45 Nathan kernel: cfg80211: Calling CRDA to update world regulatory domain
    Mai 17 08:07:45 Nathan systemd-udevd[120]: starting version 204
    Mai 17 08:07:45 Nathan kernel: lib80211: common routines for IEEE802.11 drivers
    Mai 17 08:07:45 Nathan kernel: lib80211_crypt: registered algorithm 'NULL'
    Mai 17 08:07:45 Nathan systemd-journal[113]: Journal started
    Mai 17 08:07:45 Nathan systemd-sysctl[108]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    Mai 17 08:07:45 Nathan systemd[1]: Started Apply Kernel Variables.
    Mai 17 08:07:45 Nathan systemd[1]: Started Create static device nodes in /dev.
    Mai 17 08:07:45 Nathan systemd[1]: Starting udev Kernel Device Manager...
    Mai 17 08:07:45 Nathan systemd[1]: Started udev Kernel Device Manager.
    Mai 17 08:07:45 Nathan systemd[1]: Started udev Coldplug all Devices.
    Mai 17 08:07:45 Nathan systemd[1]: Mounted Debug File System.
    Mai 17 08:07:45 Nathan systemd[1]: Mounted Temporary Directory.
    Mai 17 08:07:45 Nathan kernel: wl: module license 'Mixed/Proprietary' taints kernel.
    Mai 17 08:07:45 Nathan kernel: Disabling lock debugging due to kernel taint
    Mai 17 08:07:45 Nathan kernel: input: PC Speaker as /devices/platform/pcspkr/input/input1
    Mai 17 08:07:45 Nathan kernel: ACPI: Requesting acpi_cpufreq
    Mai 17 08:07:45 Nathan kernel: INFO @wl_cfg80211_attach : Registered CFG80211 phy
    Mai 17 08:07:45 Nathan kernel: ACPI: AC Adapter [ADP1] (on-line)
    Mai 17 08:07:45 Nathan kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
    Mai 17 08:07:45 Nathan kernel: ACPI: Lid Switch [LID0]
    Mai 17 08:07:45 Nathan kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
    Mai 17 08:07:45 Nathan kernel: ACPI: Power Button [PWRB]
    Mai 17 08:07:45 Nathan kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
    Mai 17 08:07:45 Nathan kernel: ACPI: Sleep Button [SLPB]
    Mai 17 08:07:45 Nathan systemd[1]: Mounted Huge Pages File System.
    Mai 17 08:07:45 Nathan systemd[1]: Mounted POSIX Message Queue File System.
    Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
    Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
    Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
    Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
    Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Mai 17 08:07:45 Nathan kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
    Mai 17 08:07:45 Nathan kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    Mai 17 08:07:45 Nathan kernel: ACPI: Power Button [PWRF]
    Mai 17 08:07:45 Nathan systemd[1]: Started Remount Root and Kernel File Systems.
    Mai 17 08:07:45 Nathan systemd[1]: Starting Local File Systems (Pre).
    Mai 17 08:07:45 Nathan systemd[1]: Reached target Local File Systems (Pre).
    Mai 17 08:07:45 Nathan systemd[1]: Starting Load Random Seed...
    Mai 17 08:07:45 Nathan kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
    Mai 17 08:07:45 Nathan systemd[1]: Started Load Random Seed.
    Mai 17 08:07:45 Nathan kernel: ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
    Mai 17 08:07:45 Nathan kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Mai 17 08:07:45 Nathan kernel: microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
    Mai 17 08:07:45 Nathan systemd-modules-load[111]: Inserted module 'wl'
    Mai 17 08:07:45 Nathan systemd[1]: Started Load Kernel Modules.
    Mai 17 08:07:45 Nathan systemd[1]: Mounted FUSE Control File System.
    Mai 17 08:07:45 Nathan systemd[1]: Mounting Configuration File System...
    Mai 17 08:07:45 Nathan kernel: lib80211_crypt: registered algorithm 'TKIP'
    Mai 17 08:07:45 Nathan kernel: eth0: Broadcom BCM4353 802.11 Hybrid Wireless Controller 5.100.82.112
    Mai 17 08:07:45 Nathan kernel: [drm] Initialized drm 1.1.0 20060810
    Mai 17 08:07:45 Nathan kernel: mei 0000:00:16.0: setting latency timer to 64
    Mai 17 08:07:45 Nathan kernel: mei 0000:00:16.0: irq 45 for MSI/MSI-X
    Mai 17 08:07:45 Nathan systemd[1]: Mounted Configuration File System.
    Mai 17 08:07:45 Nathan kernel: microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
    Mai 17 08:07:45 Nathan kernel: microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
    Mai 17 08:07:45 Nathan kernel: microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
    Mai 17 08:07:45 Nathan kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    Mai 17 08:07:45 Nathan systemd[1]: Found device APPLE_SSD_SM128C.
    Mai 17 08:07:45 Nathan systemd[1]: Starting File System Check on /dev/disk/by-uuid/168d8e59-b7eb-4af3-a286-ddb662307a59...
    Mai 17 08:07:45 Nathan kernel: ACPI: Battery Slot [BAT0] (battery present)
    Mai 17 08:07:45 Nathan kernel: snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    Mai 17 08:07:45 Nathan systemd[1]: Started Setup Virtual Console.
    Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    Mai 17 08:07:45 Nathan kernel: input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    Mai 17

    ewaller wrote:For the record, drm and EDID both have to do with your display system and have nothing do to with networking.drm is Direct Rendering M...  Okay, I don't know what the M means.  (not to be confused with Digital Rights Management)
    EDID is Extended Display Identification Data, information stored about you display's capabilities and geometry that are read by the video driver so provide automatic configuration.  The checksum error meant that there were inconsistencies in the data read.  No idea why.
    Edit,
    Oh, and welcome to Arch
    Thank you for the info and for the welcome. I will read more about EDID and drm.
    WonderWoofy wrote:I would also like to extend a welcome to the Arch forums and community.
    With journalctl, you have certainly discovered a powerful debugging tool.  It will no doublt come in handy along your learning adventures here.
    I will admit being very impressed by your use of code tags in a first post as a new Arch Linux user.  Bravo sir!
    Thank you also for your welcome and your advises. I  saw from other posts that the people here use some special style of representing code, so I searched a bit and clicked here and there and clicked on the BBCode link below the 'Quick post'-window and voila found the help site of the forum.
    Unfortunately, the errors came back this morning:
    Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
    Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
    Mai 18 08:22:29 Nathan kernel: iTCO_vendor_support: vendor-support=0
    Mai 18 08:22:29 Nathan kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    Mai 18 08:22:29 Nathan kernel: iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
    Mai 18 08:22:29 Nathan systemd-udevd[139]: renamed network interface eth0 to wlp2s0
    Mai 18 08:22:29 Nathan systemd-sysctl[590]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    Mai 18 08:22:29 Nathan kernel: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 250
    Mai 18 08:22:29 Nathan kernel: Raw EDID:
    Mai 18 08:22:29 Nathan kernel: 00 ff ff ff ff ff ff 00 10 df 9c 00 00 00 00 1a
    Mai 18 08:22:29 Nathan kernel: 15 01 04 95 1d 12 78 02 ef 05 97 57 54 92 27 22
    Mai 18 08:22:29 Nathan kernel: 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01
    Mai 18 08:22:29 Nathan kernel: 01 01 01 01 01 c2 23 a0 d4 50 84 1a 30 40 2a 36
    Mai 18 08:22:29 Nathan kernel: 00 1e b3 10 00 00 18 00 00 00 10 00 00 00 00 00
    Mai 18 08:22:29 Nathan kernel: iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
    Mai 18 08:22:29 Nathan systemd-udevd[139]: renamed network interface eth0 to wlp2s0
    Mai 18 08:22:29 Nathan systemd-sysctl[590]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    Mai 18 08:22:29 Nathan kernel: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 250
    Mai 18 08:22:29 Nathan kernel: Raw EDID:
    Mai 18 08:22:29 Nathan kernel: 00 ff ff ff ff ff ff 00 10 df 9c 00 00 00 00 1a
    Mai 18 08:22:29 Nathan kernel: 15 01 04 95 1d 12 78 02 ef 05 97 57 54 92 27 22
    Mai 18 08:22:29 Nathan kernel: 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01
    Mai 18 08:22:29 Nathan kernel: 01 01 01 01 01 c2 23 a0 d4 50 84 1a 30 40 2a 36
    Mai 18 08:22:29 Nathan kernel: 00 1e b3 10 00 00 18 00 00 00 10 00 00 00 00 00
    Mai 18 08:22:29 Nathan kernel: 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 4c 50
    Mai 18 08:22:29 Nathan kernel: 31 33 33 57 50 31 2d 54 4a 41 33 00 00 00 fc 00
    Mai 18 08:22:29 Nathan kernel: 43 6f 6c 6f 72 20 4c 43 44 0a 20 20 20 00 7e 00
    Mai 18 08:22:29 Nathan kernel: usb 1-1.1.2: USB disconnect, device number 7
    Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
    Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event1 (Lid Switch)
    Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event2 (Power Button)
    Mai 18 08:22:29 Nathan systemd[1]: Starting Bluetooth.
    Mai 18 08:22:29 Nathan systemd[1]: Reached target Bluetooth.
    Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event3 (Sleep Button)
    Mai 18 08:22:29 Nathan systemd-logind[335]: Watching system buttons on /dev/input/event4 (Power Button)
    Mai 18 08:22:29 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
    Mai 18 08:22:30 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
    Mai 18 08:22:30 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
    Mai 18 08:22:30 Nathan kernel: [drm:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal timeout (has irq: 1)!
    Mai 18 08:22:30 Nathan kernel: [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 8
    Mai 18 08:22:30 Nathan kernel: Raw EDID:
    Mai 18 08:22:30 Nathan kernel: 00 ff ff ff ff ff ff 00 06 10 df 9c 00 00 00 00
    Mai 18 08:22:30 Nathan kernel: 1a 15 01 04 95 1d 12 78 02 ef 05 97 57 54 92 27
    Mai 18 08:22:30 Nathan kernel: 22 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
    Mai 18 08:22:30 Nathan kernel: 01 01 01 01 01 c2 23 a0 d4 50 84 1a 30 40 2a 36
    Mai 18 08:22:30 Nathan kernel: 00 1e b3 10 00 00 18 00 00 00 10 00 00 00 00 00
    Mai 18 08:22:30 Nathan kernel: 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 4c 50
    Mai 18 08:22:30 Nathan kernel: 31 33 33 57 50 31 2d 54 4a 41 33 00 00 00 fc 00
    Mai 18 08:22:30 Nathan kernel: 43 6c 6f 72 20 4c 43 44 20 20 20 00 00 00 00 00
    I will search the net a bit and will report here what I have found on this issue.
    Edit,
    oh, and if someone here has an idea, I would be happy to 'hear' it.
    Last edited by Rhodan@Nathan (2013-05-18 08:20:22)

Maybe you are looking for