Utorrent will not workon mac. but it works on windows
utorrent stopped working a few days ago try everything but it will not work on my mac BUT IT WORKS ON WINDOWS.
Lucky you. Torrent sites are a notorious source of malware. Stay away from them.
Similar Messages
-
The backlight on my ipod touch 3rd generation will not come on, but everything else is working fine I even took the tech support advice by plugging it in and resetting it, but that didn't fix the issue either. I need help.
If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Can't send mail from iPad but IPhone is sending. Outgoing servers are set up exactly the same. I closed both safari and mail on the iPhone to try and avoid conflicts with iPad. I also shut down and restarted iPad. Still won't send.
Usually it's because you are not making internet connection via wifi.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
My iphone 4s will not turn on, It was working properly and then I noticed the battery was at 1% I then proceeded to charge my phone like normal but nothing happened. The phone was unable to turn back on it's been two hours I already, tried to reset but nothing works. I tried different chargers, my ihome nothing is working.
.
-
wi-fi is gray will not connect since ios7.03, worked fine before this version...now slow, very slow, using nothing but 4g, no wi-fi no solution from apple store but to purchase a new Iphone....other 4s phone purchased at same time connects via wi-fi what gives?
Also reloaded per Apple instructions via web, Apple stores only solution "purchase a new phone", no attempt to fix problem.https://discussions.apple.com/thread/5554599?tstart=0
-
My new Iphone 4s using the Icloud, will not push calendar changes back to my windows 7 laptop Outlook 10. It does perfectly push calendar changes from my laptop to the iphone, but it will not work the other way. We've checked the box in Itunes that says "sync the phone using WIFI" per the instructions from the Apple support people. any great ideas?
"Ok, new info. This gets better and better.
In OL2010, the Calendar in the navigation pane had no arrow indicating it had subcalendars within it. I right clicked on Calendar and chose New Calendar. It gave me a list of the existing calendars that were missing !!
When I cancelled, there was an expand arrow next to Calendar in the Navigation pane !!!!!
Expanding it showed the unchecked missing calendars. I checked them and synched again.
WRONG THING TO DO! ALL my wife's calendar entries in her iPhone since the laptop went down 3 weeks ago DISAPPEARED. No warnings, nothing at any step of this process. The OL files overwrote the iPhone data.
I can't find any way to get them back as this **** iStuff relies on iTunes for everything.
Is there any way to get her files back from before this synch?
Is there no way to save data files off the iPhone w/o iTunes?
Why doesn't iTunes let you control the direction of data transfer?
I now have one very ****** off wife. -
Hi
RDP connection over server 2008 R2 standard, if I disconnect and connect the session, which was currently working will not be avialable but a new session starts.
what features should I add and how to configure so that if connection is lost the user should see the same session when they connect back.
kind Regards,
JayanthHi,
Please enable this policy and try again.
Restrict Users to a Single Session
http://technet.microsoft.com/en-us/library/cc754762.aspx
Thanks.
Jeremy Wu
TechNet Community Support -
My iTouch will not show movies, but they are showing on my iTunes. When I try and play them through my iTunes it freezes on me and does not work. This problem only occurs whenever I am using my netbook. It doesn't happen when I use a different computer. I tried uninstalling and reinstalling itunes and am not sure what else to do from here.
You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer -
My Powerbook will not power up, but I can hear the fan running...
Please help!! My Powerbook will not power up, but I can hear the fan running when I press the power button to attempt to power it up. I just received a new power adapter because it wasn't working properly and it was doing this before and then it worked for a week and now it will not power up at all. It just starts the fan but nothing else turns on. When I plug the adapter, with the battery still connected, it will look as if it is charging but then the light on the plug turns from green to orange then off and doesn't power up at all. If I take the battery out and plug in the adapter, the light stays on but it does not power up except for the fan noise. Does anyone have any suggestions? I also followed the two articles listed online in regards to resetting the power setting and the command + alt + P + R as well. Nothing works. Thanks in advance.....
Same here. If I start up with the power adapter attached, it starts up fine. If I try to start up from battery only, the fan comes on, the sleep light comes on but nothing else happens. I tried letting it sit that way for about 15 minutes and nothing changed. I tried attaching the power cord while in this mode and nothing changed. I tried the PMU reset a couple of times but nothing helps.
This computer is just over 1 year old and I have not had any problems with the power cord (3rd party), the battery, or any problem like this before. It started after a proper shutdown last night and attempt to start without the power cord this afternoon.
Any answers to this yet? I think I'll call on this and report any success to this discussion.
15" PowerBook G4 Mac OS X (10.4.8) 1 GB DDR2 SDRAM, 100 GB HD -
2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light
The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
The TC runs too hot..
Look on ebay for "Time Capsule power supply"
You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
If you can DIY it is really only a few dollars worth of capacitors that go bad.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
For a bunch of alternatives. -
face book has stopped working on my I pad. I got to it through Safari as i do on my mac. It works on my mac but stopped working last night on my i-pad
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If you stillc an't access Facebook via Safari then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
There are a number of Facebook apps (including an 'official' one), which might be better than accessing it via Safari -
Brand new computer with Windows 8.1 will not sync to iPod Classic 120G. Windows does not recognize anything but iPod Touch? Is there a simple solution. Diagnostics have run and failed to point to a fix.
Might be worth tearing down the whole iTunes install and starting over...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Latest 64-bit Nightly will not install. Minefield was working fine!
I was regularly using Minefield on my 64-bit Windows 7 system. The updates installed fine. About the second update following the switch from Minefield to Nightly (roughly 04/25), the upgrade install completes but the program will not run. I just get a "Windows" window saying it won't run. I attempted to un-install, clean registry, reinstall, etc. Nothing works. I tried compatibility settings to no avail. Any suggestions. Windows (of course) hasn't found a solution.
There is a known problem with the latest 64 bit versions of the nightly builds. The 32 bit versions are working. One of the best places to keep track of issues with the nightly builds is the MozillaZine builds forum - http://forums.mozillazine.org/viewforum.php?f=23
-
Question
Firefox will not allow Flash player to work. Every site that uses Flash player gives me a message saying that I need to update to the latest version of Flash player, but I have done so, and I keep getting the same message. How do I enable Flash to work in Firefox? Thank you.You can hold down the Shift key and double click the Firefox desktop icon to start Firefox in [[Safe mode]].
-
After accepting the carrier update yesterday my iPhone 5s will not receive emails via my work Exchange system. I can send emails, but can not receive. I deleted my account and added it back with the directed provided by our Corporate IT, but I still can't receive emails. I've hard booted and soft booted my phone several times to no avail. What else can I do to help remedy this situation?
I don't have any other email accounts on my phone and I don't get any type of error message. It just says "Checking for Mail" and I receive nothing, so I know that it is accessing my work email system. I haven't made any changes to my account. I only accepted the message to update my carrier system.....I do have an appointment with the local Verizon store to see if they can help.
Just FYI, my Exchange email account still works on my iPad, so I'm pretty sure the settings are correct.
Maybe you are looking for
-
BT Infinity, Before and after!
Before infinity(isp was sky connect) [IMG] After: (bt infinity) Happy days, but i think it can go faster than right now although it is day 1. how do i access my router stats like in netgear?
-
I have Adobe LiveCycle installed on my computer, and I am upgrading my computer, how do I install LiveCycle on my new computer so I can enter in my product key?
-
I didn't find configure terminal command in the ios of aironet 1131AG
Dear All i bought cisco aironet 1131AG yesterday. when the AP get IP from DHCP and trying to access it by internet browser, the web page is empty so i tried to access AP by console and login in to the privileged mode but i did't find the configure te
-
ADOBE LiveCycle Desinger ES 8.2 Replacement
I have ADOBE LiveCycle Desinger ES 8.2 installed on a Windows XP PC that has been replaced with a Windows 7 PC. I went to install the software on the new system and I am unable to locate the disks. I realize that this version of the program is seriou
-
Can an autonomous 1252 be converted to Lightweight AP?
I have incorrectly received a 1252 AP (model number AIR-AP1252AS-E-K9) and was hoping to convert this to a lightweight AP. But in the documentation this device is missing from the list of devices that can be converted. I am also unable to find an upg