Utter failure on Comcast's Part to convert me from Dish.
I have been a Dish Customer for 10 years. I foolishly thought Comcast might be able to offer me better technology/value.more than a month later, and i still do not have the most basic local TV channels. 6 phone calls, and 3 chat people (Non Americans, or english speaking,) later, and I have wasted hours of my time, and no service. You seem to have been able to quickly figure out the bill, and remind me twice "Your bill is ready." Nope, it appears the internet complaints about service are correct.
Was the fresh install..before or after the "issue"?
Check Audio Hardware and Audio Preferences and any audio settings.
Similar Messages
-
Convert Catalog from Adobe Photoshop Album to Photoshop Elements 13
Hello Community!
I've searched for this question in Google, but I didn't find an answer that helped me.
The old computer from my client with Windows XP OS is getting replaced by a new one with Windows 7.
There was Adobe Photoshop Album on the old one which isn't supported anymore. My client had over 15'000 pictures on his old PC which I've already copied on the new computer. Now he wants his albums, tags and these things from Adobe Photoshop Album back, so I decided to install Photoshop Elements 13 because of the Elements Organizer tool.
Now I've seen answers in forums that sayed that all these informations are saved in the "My Albums.psa" Catalog file, which I've already found on the old computer and copied on the new one. Some people sayed it would work with the "convert" option in PSE, but this doesn't work for me, because PSE doesn't see the .psa file. So I tried to convert my .psa file with this Tool, but in the middle of the progress it says that it failed and that I should try to repair the file in PSE. I'm now stuck here, with several different solutions, and yet I don't know what to do now.
I've read something about the folder structure and that the pictures and folders have to be on the harddisk when trying to convert the .psa file. All pictures are on the new computer, but of course the folders aren't the same on the new OS.
It would be glad if I find a solution as soon as possible from someone in the community.
Thanks and have a nice day!Finally I could solve the problem.
I tried to import the Backup.tly in Photoshop Elements, but without success. Even there an Error appeared. The conversion tool also still got this failure at a progress of 15% conversion... So I searched a reason for the failure in google and found this helpful article from Adobe. It says that you should look for the corrupt images in the log file. So did I, and I found the error causing picture on the old computer and deleted it. After that I opened Photoshop Album, clicked on "File > Reconnect all missing files" and deleted this picture from the catalog.
Now I didn't want to make the backup again, because the last nearly had 1h. So I decided to try it again by just copying the catalog.psa from the old computer to the new one and to convert it again with the conversion tool. The error came again, but at a progress of 22% So i had to do this a few times: Searching the corrupt image in the log file, deleting it on the old computer, deleting the missing file in Photoshop Album and converting it. And finally, it worked, no error after conversion! I let photoshop elements 13 open the new .pse13 file. Now, all tags and albums were back on Photoshop Elements. Eventually, I let the programm searching the new paths of all the images. It takes a time but it works great now. Thanks for your help, I would recommend the Adobe Community & support! -
HT5409 can i convert movies from iPad to mac laptop
Ihave download a movie from ipad but it will not play on my mac air laptop with quicktime installed..??
Ihave download a movie from ipad but it will not play on my mac air laptop with quicktime installed..??
Are you going to give us any additional clues as to what you are really asking here?
1) The "HT5409" in your subject title reference implies you are dealing with AVCHD content. If true, then how did you transfer them to your iPad and how did you transfer them from your iPad to your your MacBook Air platform? As the HT409 topic clearly stated, this can be very important. In addition, how are the files stored? For instance , have you extracted the MPEG-4 AVC content as transport streams or is the content still in the device recorded file form? Are you trying to edit the content or convert it to M4V, MP4, or MOV files directly?
2) The "can i convert movies from iPad to mac laptop" part of your subject title is confusing. Yes, AVCHD files can be converted to simpler MPEG-4 AVC content that is compatible with all current and most older Mac computers and Apple mobile devices in MOV, MP4, and/or M4V file formats. However, how you do this will depend on the current form of the data and the target settings you wish to employ to ensure compatibility with the various target device possibilities. Further, non-AVCHD content (e.g., HD iPad video recordings) can also be downconverted to simpler settings in a similar manner if needed or required if that is your questing.
3) Depending on your operating system, both AVCHD and MPEG-4 AVC content should already be compatible with QT X v10.2 and v10.3 players if properly transferred to your laptop from the recording device. And, even if improperly transferred, may still be converted to useable/compatible formats as long as the file itself has not been corrupted by your, as yet, unspecified workflow.
4) What does "will not play on my mac air laptop with quicktime installed" mean here? Are you trying to play an AVCHD movie in the QT 7 player or one of the QT X players? If the latter, which one? Are you getting any error message? If so, what are they? If not playing in your main user account on the computer, does it play useing a different account? Do the files play in other, third-party multimedia players?
Basically, your question is the equivalent of my saying my car won't start but failing to mention whether or not I am out of gas, my battery is dead, or that I have removoed the distributor cap, wires, or spark plugs from the engine. To properly solve the issue we need all possible information that you can provide describing exactly what you are doing, how you are doing it, what is not working as your expect it should, and what your goals are. In cases where you cannot answer such questions, it is often helpful to simply post/upload a sample "problem" file and let other users here examine it to determine the problem and/or suggest a specific solution for your particular system/configuration combination. -
Need to convert Date from calendar to String in the format dd-mom-yyyy
Need to convert Date from calendar to String in the format dd-mom-yyyy+..
This is absolutely necessary... any help plz..
Rgds
ArwinderLook up the SimpleDateFormat class: http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html
Arwinder wrote:
This is absolutely necessary... any help plz..For you maybe, not others. Please refrain from trying to urge others to answer your queries. They'll do it at their own pace ( if at all ).
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
---------------------------------------------------------------- -
How can I convert Pdf from RGB to CMYK, keeping font color 100% K while working in Illustrator?
When I try to open the document in Illustrator and I convert to CMYK the black font converts to rich black, but to set up for Offset printintg I need the text to be only in Black (100%K).
The original source of the document is a Microsoft Word file, I have converted the Word file to Pdf in order to setup for OFfset Printing.
ThanksI have tried that way, but the downside is that the fonts are set in gray not in a 100%K, also I have to deal with other fonts that are composites and meant to stay Full Color. I could select text by text and convert to gray but, its a 64 page document and I wouldn't want to make a expensive mistake.
-
Error when starting a converted VM (from vmware server edition)
Hi, i am trying to start a converted VM from VMWARE SERVER. I think i have followed steps to import an VMWARE machine (using resources >> virtual machines images) and it does not return errors when converting VM but then, when trying to start it, it returns
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise e
I have also checked that there is enough memory.
This is the contect for vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/OVS/running_pool/SIR_xxx/SIR_xxx.img,hda,w',
'file:/OVS/running_pool/SIR_consulnor/SIR_xxx (2).img,hdb,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '512'
name = 'SIR_xxx'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '1'
uuid = 'e23767cc-dc3d-0255-a7ac-65f111b589d7'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:71:AF:B1,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xxx'
vncunused = 1
Thanks for your helpuser559432 wrote:
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise eDo your servers have Hardware/Full Virtualization enabled? You can check on the console and ensure the console says that Hardware Virtualization is enabled. If not, check in your BIOS that the processor hardware virtualization is enabled. If you don't have an option, your PC may not have the Intel VT-x or AMD-v extensions required to support hardware virtualization.
You can check to see if your processor supports this extension by using:
Intel processor:
# cat /proc/cpuinfo | grep vmxAMD processor:
# cat /proc/cpuinfo | grep svmIf you see a result, it means the processor has that support. You still need to ensure that it is enabled in the BIOS. -
How can I paste a part of a sheet that I copied in Numers in a pages document without the formulas, simply as text. Used this a lot in Office. When I make some changes in the pages document. f.i. deleting a cell, I don't want to change other cells. Also when I copy a part of a sheet from Numbers and one of the cells that is part of the formula is not also copied, when I paste in Pages it shows as an error.
Hope that You can me help with this.Leon,
There are two solutions to the first question, narrowing to one solution when you have a broken link causing an error.
Here's the "works always" solution.
Copy (Command-C) the table or range in Numbers
Click off the table on the blank canvas of the sheet.
Edit > Paste Values
Command-C
Switch to Pages
Command-V
Regards,
Jerry -
following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?http://www.apple.com/support/mac/app-store/contact/
-
How to convert date from "yyyymmdd" to "MM/DD/YYYY" format
1. I have one BLDAT field in my internal table.
its getting updated from input file.
2. The value in the input file is like yyyymmdd.
So the internal table field is filled like this
"YYYYMMDD".
3. After this,I have to compare this internal table
field with BSAD table.
4. The BLDAT field in BSAD table is in the format of
"MM/DD/YYYY".
5. the BLDAT field is having diff format in internal table and BSAD table.So I am unable to check this value.
How to convert it as like the BSAD table format."MM/DD/YYYY" format.
Thanks in advance!!Using the WRITE statement
data: gd_date(10). "field to store output date
* Converts date from 20020901 to 09.01.2002
write sy-datum to gd_date mm/dd/yyyy.
OR u can
CONCATENATE gd_date+4(2) gd_date+6(2) gd_date+0(4)
into gd_date seperated by '/' .
Hope this helps.
Kindly reward points and close the thread for the
answer which helped u OR get back with queries. -
How to I convert data from oracle database into excel sheet
how to I convert data from oracle database into excel sheet.
I need to import columns and there datas from oracle database to microsoft excel sheet.
Please let me know the different ways for doing this.
Thanks.asktom.oracle.com has an excellent article on writing a PL/SQL procedure that dumps data to an Excel spreadsheet-- search for 'Excel' and it'll come up.
You can also use your favorite connection protocol (ODBC, OLE DB, etc) to connect from Excel to Oracle and pull the data out that way.
Justin -
Convert report from SAP to Excel
Hi All,
How to convert report from SAP to Excel.Here now taking default text(.txt) format.But we want defualt taking (.xls) format only.
Regards
Ushahi usha
u can even export the text in txt format and later right click and open with excel , u wont be able to directly import it into excel as it is not giving u any option to upload in excel directly
Regards,
Manish -
I had a hard disc failure and had to reload Design suite 6 from disc. The program is now telling me I have 7 days to register the product or it will quit working. The serial number is already registered. It won't connect to the adobe site from the popup screen that comes up telling me I only have 7 days to register. What do I do?
Go to the Help menu in Photoshop and choose Activate. It should open a wizard allowing you to do this.
If that fails, Contact Customer Care after clicking on one of the activation links. The more information you give them, the easier it will be for them to help you.
Gene -
Error while converting schema from oracle to SQL server
Hello,
I am getting following error while converting schema from oracle to SQL server using SSMA.
I get Errors 1-3 while migrating procedures and error 4 while migrating a table.
1- O2SS0050: Conversion of identifier 'SYSDATE' is not supported.
2- O2SS0050: Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.
3- O2SS0050: Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported.
4- O2SS0486: <Primary key name> constraint is disabled in Oracle and cannot be converted because SQL Server does not support disabling of primary or unique constraint.
Please suggest.
Thanks.The exact statement in oracle side which causing this error (O2SS0050:
Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.) is below:
dStartDate:= to_date(sStartDate,'MON-YYYY');
Statement causing error O2SS0050:
Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported is below.
nCount2:= length(regexp_replace(sDataRow,'[^,]'));
So there is no statement which is using to_date(VARCHAR2,
CHAR) and regexp_replace(VARCHAR2, CHAR) in as such. 'MON-YYYY' and '[^,]'
are CHAR values hence SSMA is unable to convert it from varchar2 to char.
Regarding SYSDATE issue, you mean to put below code in target(SQL) side in SSMA ?
dDate date := sysdate;
Thanks. -
When attempting to open saved documents for viewing a box pops up "convert file from" with applications that can be chosen from to use. When any of the options are chosen the document then opens but is in symbols and is unreadable. This is happening with all saved documents. Can you offer any help with this?
Hi,
If you don't find any clue, you can send your file to me (guillaume.rouyreATgcosiDOTcom, replace cap) so I can give a try.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
Can I convert a from from Adobe Forms Central to a PDF Form?
Can I convert a from from Adobe Forms Central to a PDF Form?
Yes, you can save a FormsCentral form as a PDF form. In FormsCentral, the menu item when in design view is: File > Save as PDF Form
Maybe you are looking for
-
Whin I try and long into the icloud, I get a message that my Apple ID is valid, but the it is not an icloud account, how can I make it one?
-
How can I start System Preferences from the command line?
Hello All, I have an issue I'm not quite sure how to solve. I have been tasked within my business environment with tightening security on a Mac Leopard system and I've been granted Admin Rights to do this on a temporary basis. The problem is as foll
-
How to create an event marker with durations of upto 10mins
Hi, I want to record the time of an event, occuring on the acquired data or a user generated keyboard event, since the start of a recording sessions. A typical session of record will take 10-15 mins. The timer need to start as soon as the recording i
-
Creative Mediasource for Creative Zen (2-38
Hey everyone, I am well aware that the current version of Creative Mediasource is not available for the Creative Zen. Now I figured that eventually they would make a version compatible with the Zen. I'm currently up to my 3rd Generation of Creative M
-
How to enter EXECSQL in BW 7?
Hello Experts, I have a problem regarding a transaction which I know from the old SAP BW 3.5 it's called EXECSQL. Now I also would like to use this transaction on the new SAP BW 7.0 system but the transaction is not longer available. Could you please