UWC - 'not found' response from cal/addr/options tab

As the subject says, you log into UWC, the mail tab is working fine, but the Calendar Tab, Address Book and Options Tab all come back with 404 Not Found. I've seen several common issues in the past with odd links, but I've never seen all of them return not found while the mail tab works no problem.
Installation is UWC 05Q4, Messaging on the same host, Cal/AM/LDAP on a remote host.
Any experiences like I've described?

Hi,
122793 is the 6.3 UWC upgrade patch -- so not the right patch as there are a number of pre-requisite steps to perform prior to upgrading and a few post-steps:
http://www.sun.com/bigadmin/hubs/comms/downloads/updates.jsp
Regards.
Shane.

Similar Messages

Value not found in allowed list of options for field...

Hi,
I'm using RIDC on UCM 11g in order to checkin contents.
UCM hosts different projects.
I've the following problem: if somebody (from a different project) insert a new Information Field (e.g. xAnnoPubblicazione) of type Integer - Option List - Select List Validated and it does not make a default value for this field, when I perform checkin using RIDC, it fails with the error:
"oracle.stellent.ridc.protocol.ServiceException: Content item 'UCMRE010132' was not successfully checked in. Value not found in allowed list of options for field 'xAnnoPubblicazione'.
How can I solve this issue? what's the recommended way?
Thank you very much.
Best regards,
S.

In the database language, you have created a NON NULL column and you are trying to insert a record with NULL value to the column. Of course, it cannot work.
There are three options:
- do not declare the field as NON NULL (that is, you option list has to contain 'blank' as a possible value)
- provide the value on insert
- provide the default value

Not getting Response from RFC

Hi,
I am doing RFC to File. I could generate the FILE successfully. But I am not getting Response from RFC. I am getting empty payload. I am doing with out BPM. I did succesfully File-RFC-File. but here RFC is the sender. I have some doubts in defining Interface mapping and Message Mapping. Is this a Syscronous scenario by default ?
If I want to get the resonse of RFC to a file. How many Receivers and Senders do i need to create?
Regards,
Varun
Edited by: Varun on Sep 9, 2008 1:00 PM

hi,
Map Rfc.response to the File; hence rfc sender adapter and file receiver adapter..one sender n 1 receiver.Remember:
1. In the report that makes the call to XI , make sure that you use call RFC in a background task.
2. Make sure you use Commit Work at the end of the report.
Follow:
Send RFC to SAP XI Asynchronous
Also pls visit
Re: RFC to FILE
for the same scenario.
Thanks,
Durga
Edited by: NagaDurga Nannapaneni on Sep 9, 2008 10:55 AM

I get a "message not found" text from "Unknown". I'm getting some of my texts but I don't think all. I appreciate any help! Thx!

I get a "message not found" text from "unknown". what is this and how do I get it to stop? Thanks!!

Did you jailbreak your iPhone? If you did, that's probably why you're seeing those messages, see this Apple doc -> Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues
Try restarting or restoring the iPhone.

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

One socket and two ports, not getting response from the server

Hi everyone,
I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port. My problem is that i can't create another socket using this port and therefore not getting the response from the device.
Can you people tell me how to handle such socket communication in java ?
Thanks in advance.

I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.Are you sure? That's not usual. It would be usual for it to use the same port for listening, reading, and writing.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port.I would try just reading from the same socket you are sending on. I suggest you have misunderstood how the device works.

Not getting response from Client Proxy

Hi,
We are developing a scenario - File->PI->Proxy using ABAP Proxies.We are posting a file thru PI 7.0 to R/3 .In R/3 the server proxy(Inbound Asynchronous) will receive the message and BAPI will be called. The response from the BAPI will be reaching the server proxy and passed to the client proxy(Outbound Asynchronous).
Server Proxy(request) --> BAPI --> Server Proxy(response) --> Client Proxy(response)
The response from the client proxy has to be send to PI and a file will be generated as the output.
Can anyone provide me suggestions to call client proxy from a server proxy by passing the response message to client proxy???
Thanks in advance.
Regards,
Dibyajyoti

Hi,
I hope, you are done till the Implementation of Server Proxy, where you are calling a Bapi and passing the Input variables the Interface received and BAPI is giving a response back.
Now your question, how to send the response back Asynchronously.
I think, you have to do the same, what you do for a client proxy and at last call the method EXECUTE_ASYNCHRONOUS before the Final Commit Staement. I think this should work.
But using Synchronous Interface in such cases is always a handy and easier option.
Regards,
Subhendu

Created serializable object, but get "Class not found" on "createObjectMessage()" cal

I'm using OC4J 9.0.2.1 and JDeveloper 9.0.2 with Oracle db. I have a set of queues created in the database.
Before I try to send my request, I create an instance of the serializable object I want to send. I do all of my queue connection setup, then I call:
queueSession.createObjectMessage(request);
Where "queueSession" is a QueueSession obtained from "queueConnection.createQueueSession()".
When I step over this function call, I get the following:
oracle.jms.AQjmsException: JMS-109: Class not found: com.attws.it.bsa.felix.mci.common.ServiceInfoRequest
(The indicated class name is the type of the "request" object.)
What could I be doing wrong?

The code below creates the following classes when I compile it (using jsk1.3):
DistanceBarApplication2.class
DistanceBarApplication2$1
DistanceBarApplication2$2
DistanceBarApplication2$3
DistanceBarApplication2$DistanceBar2
The error I receive is: load: class DistanceBarApplication2 not found
Here is my HTML code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<TITLE> New Document </TITLE>
</HEAD>
<BODY>
<applet code="DistanceBarApplication2.class" width=300 height=50>
</applet>
</BODY>
</HTML>
Here is the Java code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DistanceBarApplication2 extends JApplet {
private final DistanceBar2 bar = new DistanceBar2();
public void init() {
bar.setMaximum(100);
bar.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
bar.stop();
JOptionPane.showMessageDialog(bar, bar.getValue() + " yards");
bar.start();
this.getContentPane().add(bar);
bar.start();
static class DistanceBar2 extends JProgressBar {
private Thread mThread;
private boolean mRunning= false;
private int mValue = 0;
private boolean mUp = true;
private Runnable updater = new Runnable() {
public void run() {
setValue(mValue);
public void start() {
if (mRunning) {
return;
mRunning = true;
mThread = new Thread(new Runnable() {
public void run() {
while (mRunning) {
try {
Thread.sleep(30);
} catch (InterruptedException e) { }
adjust();
mThread.setDaemon(true);
mThread.start();
public void stop() {
mRunning= false;
// Best to let a thread run itself out
// if (mThread != null)
// mThread.interrupt();
// Don't need this for this applet, but possibly later
// public Dimension getPreferredSize() {
// return new Dimension(300,70);
private void adjust() {
int delta = getMaximum() / 40;
mValue += delta * (mUp ? 1 : -1);
if (mValue >= getMaximum()) {
mValue = getMaximum();
mUp = false;
} else if (mValue <= 0) {
mValue = 0;
mUp = true;
SwingUtilities.invokeLater(updater);

Socket Programming-Not getting response from server.

Hi,
I am trying to communicate with server using java socket programming, I am getting the response for first two times third time when I am trying to write some thing I am not getting any response from the server,
I am writing to migrate the vb code to Java the vb is using a c++ dll to communicate with the server and we tried accessing the dll from java using JNI then it is working fine, this dll is dependent on windows so we want to avoid the dependency with windows that is why we are going for socket programming, Please help on this.

Hi,
I am writing the data in forms of string
like
Socket sockt = new Socket(ipAddress, portNo);
out= new DataOutputStream(sockt.getOutputStream());
in = new DataInputStream(sockt.getInputStream());
out.writeBytes("Serv");
out.writeBytes("Serv,32");
out.writeBytes("home,serv32,run.prg,sucess");
these are the strings to communicate with server.
I am trying to read the same
StringBuffer buf = new StringBuffer();
          byte b = '\0';
                    try {
               while ((b = in.readByte()) != '\0')
                    char ch = (char) b;
                    buf.append(ch);
          } catch (Exception e) {
               System.out.println(e.getStackTrace());
we are getting the response for the first two strings, but for the third string it is getting stucked for some time and returing some junk values like '???' we are sending the same string using JNI and it is working.

ESB is not receiving response from BPEL

I have routing rule in ESB which routes the input to BPEL process.
ESB is not receving any response from BPEL
When I execute BPEL process independently, BPEL process is completing successfully and returning response.
but when I invoked (Sync/Async) it from ESB, I am simply getting empty response back.
in ESB console I got following message
An unhandled exception has been thrown in the ESB system. The exception reported is: "com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 7836DD907BDE11DCBFEDA1C287EB1942. Please check the process instance for detail. at com.evermind.server.rmi.RMICall.EXCEPTION_ORIGINATES_FROM_THE_REMOTE_SERVER(RMICall.java:109) at com.evermind.server.rmi.RMICall.throwRecordedException(RMICall.java:125) at com.evermind.server.rmi.RMIClientConnection.obtainRemoteMethodResponse(RMIClientConnection.java:517) at com.evermind.server.rmi.RMIClientConnection.invokeMethod(RMIClientConnection.java:461) at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocationHandler.java:63) at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(RecoverableRemoteInvocationHandler.java:28) at com.evermind.server.ejb.StatelessSessionRemoteInvocationHandler.invoke(StatelessSessionRemoteInvocationHandler.java:43) at __Proxy10.request(Unknown Source) at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:104) at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:67) at oracle.tip.esb.server.service.impl.bpel.BPELService.processBusinessEvent(BPELService.java:380) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:106) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:85) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1416) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:105) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:273) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138) at oracle.tip.esb.server.dispatch.DeferredEventDispatcher.processSubscriptions(DeferredEventDispatcher.java:150) at oracle.tip.esb.se
Thanks
Praveen

Is it possible to add several checkpoint in embedded java too your process to see where (on which activity) it fails.
no extra information in the domain.log of bpel on this process ?
it's possible that the bpel is started, the first activity executes ok, but the second fails ( for example xslt error) and if the process isn't dehydrated , you wont see any output in the console, but the process is already started..

404 not found error from BB Protect download

Hi,
My sync/charge contact has broken off, so I am trying to download Blackberry Protect directly onto the phone. Every the browser seems to work fine, but every time I click 'Download Protect', whether from Google or within Blackberry's site logged on with BlackberryID, I get the 404 : Not found error on my phone.
Is it impossible to download directly, do Blackberry have a problem with downloads at the moment or is there another issue?
Thanks,
Tom

Hi,
My sync/charge contact has broken off, so I am trying to download Blackberry Protect directly onto the phone. Every the browser seems to work fine, but every time I click 'Download Protect', whether from Google or within Blackberry's site logged on with BlackberryID, I get the 404 : Not found error on my phone.
Is it impossible to download directly, do Blackberry have a problem with downloads at the moment or is there another issue?
Thanks,
Tom

How to install windows 7 when an error occurs: "Not Found returned from legacy loader" with refit?

SOLUTION FOR THIS QUESTION :
before you need to create a Windows partition ( boot camp assistant for example) and install rEFIt
1- download SLAX LIVE CD -->http://www.slax.org/
2- burn cd with slax
3- run slax live cd without reFIT ... press Option key ( ALT )
4- when slax operative system is open, turn off the computer!
5- donload UBuntu Live cd --> http://www.ubuntu.com/download/ubuntu/download
6- burn cd with ubuntu.
7- run ubuntu live cd and open without installing
8 - open administration --> partition and format the actual partition ( fat32 ) created on MAC OS X to NTFS.
9 - Restart computer and run REFIT ( press Option key ( ALT ) ). run live cd or USB pen with windows 7, xp or VIsta.
Note:
I use a external DVD drive -Samsung SE-S084D
Ubuntu version 9.04.

.

How to send a do not reply response from Ironport

Our business Ironport appliances are set up with several domains.   We have a requirement to send a receipt message responding to certain customers who email an address on only one of the configured domains.    The receipt message needs to come from a [email protected] address and is to confirm that the email has been received.
So far I have a notfiication template configured with the message that we want to send out, and a content filter with a condition that uses Envelope recipient to identify the address that has been emailed, and a notify action that uses the notification template to send the message out.     The problem with this is that when the customer receives the email it comes from the address ironport@hostname.     The only way I can see of changing this is to change the Notifications option under the System Admin/Return Addresses option, however this is a global change that then changes the address for all notification for all domains and for messages from the appliance itself.      If we then have a future requirement to do the same thing for a different domain we're stuck.
Can anyone suggest another way of doing this just for one domain.    I've wondering about custom message filters/text resources but don't know how to work them.
thanks
Chris

Within the Notify action on the Filter itself, you can override the Sender information that would have been populated from the Return Addresses page. If you are using a Content Filter, this is set in the 'Return Path:' field. For Message Filters, you would set it in the 3rd set of quotes, for example:
notify("$EnvelopeSender", "template_name", "[email protected]");
The email address specified here is used as the Envelope Sender, and the From: & Reply-To: headers.
- Jackie

CIM_ERR_FAILED: HTTP response code: 404 Not found

Hello!
We are installing NW7.0 PI with local SLD as HA system with virtual name and after patching it up to SPS17 we started Configuration wizard
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage
and on step 33/142 Configure the Integration server for sld we got an error:
CIM_ERR_FAILED: HTTP response code: 404 Not found
and from log:
InvokeService:Configure the integration server for sld
Library: sap.com/tclmctctemplateslevel1_4_tcc
SourcePath ./PIPostInstallProcess/configureIntegrationServer8
Time 2009/05/07 at 10:45:31
WSDL /content/NetWeaver/PI/service/SLDConfig_configureIntegrationServer_configureIntegrationServer.wsdl
Execute Java Service
Library:sap.com/tclmctcutilbasic_ear
Class:com.sap.ctc.util.SLDConfig
Method:void com.sap.ctc.util.SLDConfig.configureIntegrationServer(java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String, java.lang.String)
Arguments
SID : XRQ
CLIENT : 001
HOST : capitate
PORT : 8032
SLDUSER : PISUPER
SLDPASSWORD : % secure content %
InvokeService- Result: Failed
Exception Message:CIM_ERR_FAILED: HTTP response code: 404 Not found
Exception Class:com.sap.sld.api.wbem.exception.CIMCommunicationException
Stacktrace
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.newCommunicationException(WBEMHttpRequestSender.java:414)
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.processResponse(WBEMHttpRequestSender.java:323)
com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
This error would be normal with Central SLD but we have local SLD. Is there any parameters for systems with virtual name which is not configured?
Regards,
Mart

Thanks for answering.
Configuration is done by the Post-Installation Guide - SLD of SAP NetWeaver 7.0 , but there is still same error.
It seems, that point is in CPA Cache full refresh, because in SLD Java system on app.server still shows his patchlevel 9 not 17 .
CPA Cache refresh gives an error:
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://capitate:53200/CPACache/refresh?mode=full'. Li...
CPA cache refresh (mode=full) successfully executed in 703 milliseconds.
^
Regards,
Mart

Invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

Hi,
I have mentioned some issues that I am facing in SOAP receiver adapter:
[XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 404 Not Found;
Apart from that I am trying with unchecking 'Do Not Use SOAP envelope' and by using MessageTransformBean, for which I am getting the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
Need your help in resolving this.
Regards,
Vishal

I have some ideas which will help you out. Check the below option one by one:
1. Check receiver server is accessable from XI/PI system through IP address in command prompt.
2. Check whether any PORT is enabled for this server. ex: http://ipaddress:portno/XXX/XXX.asmx
3. You can download webservice tool(SOAP UI and etc..)to check your webservice(WSDL) file able to connect the server by importing webservice file in this tool.
4. Sometime customer may updated in their application(coding and etc) and not given the updated webservice file to us. so make sure you got updated one.
Regards,
Senthil

UWC - 'not found' response from cal/addr/options tab

Similar Messages

Maybe you are looking for