UWL at SP13 and Connection status button

Is it just me, but if you are on SP13 then the connection status button in the Universal Inbox gives no output, but the items still appear in the inbox. I have two sp13 systems which have this problem and I know it worked before sp13. I have another portal which is on SP12 and the connection status button works as expected.

Hi Chuckie,
We have not done the SP14 upgrade yet. We have captured a series of issues in SP13 that is clearly justifying the upgrade but we just need to find the time.
Issues that affect us include:
- upload of files to collab rooms (866283)
- pop-up for non-SSL warnings (872859)
- pop-up for non-SSL warnings for Life & Work events (666182)
- "Active Users" reporting (SDN Message)
- The UWL stuff (676253) for the "Workflow ID" message
I am sure that there are others but there are the direct reasons...
We would love to leverage any info you can get from the upgrade to SP14...
Of course, read the note on SP14 and the fixes/changes.
I guess that we will be there late in January.
Take care and have a nice weekend!
Judson

Similar Messages

IE10 rendering error in UWL sub dialogs like connections status

Hi,
I am using a custom framework and added the browser document mode iview with the sap-ie=EmulateIE8 parameter as described in various blogs. I also added this parameter to iviews where applicable but there are still rendering error messages in some UWL dialogs that are opened through the UWL dialog itself e.g. the connection status window or the delegate window.
Where can I add the sap-ie parameter to have these dialogs also rendered without warning?
Thanks for any helpful hints in advance!
Regards Stefan

Hi Stefan
I hope you are well and many thanks for using the SAP Discussion Forums .
I'd like to re-emphasize the importance of what Donald mentioned above:
Have you tried setting IE to use compatibility mode?
Tools->Compatibility View settings - Add your Portal URL in the list
In addition to this there are some important points to highlight regarding the utilization of IE10.
Kindly see the below SAP Note Documentation (Compatability Section also Included).
SAP Note 1785100 - Internet Explorer 10 Release Notes
I would like you to review all the content available on SAP Note 1785100. As you can see in the Symptom section of the note, it also summarizes the Internet Explorer 10 limitations and system requirements that are known in some areas, including Web Dynpro and JAVA which is thetechnology used by the UWL iViews.
- SAP Note: 1718465 - IE10 rendering issues with Web Dynpro Java
From researching previously reported scenarios similar to the one that you are experiencing it seems the activation of compatibility mode has been used as the resolution before. Another point of analysis is the browser window zoom and its current setting, is it set to 100%?
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer
Follow Troy Cronin

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

Facebook and Twitter status buttons in notification center?

Hi Apple community,
I was messing around on my ipad mini with iOS 7 today and noticed that I cannot update my Facebook and Twitter status from notification center. Does anyone know how to turn this feature back on or if it was done away with iOS 7 altogether?

Hey, thanks for the reply.
Yes, Facebook and Twitter are defined & enabled. I'm able to send out Tweets and Post to Facebook from Notification Centre.

HT1515 I've lost my wireless connection with light flashing amber, I've unplugged router and modem and pressed reset button on airport extreme

Any suggestions on retreiving wireless connection with airport extreme, have unlugged power to all sources and pressed reset button on router, still amber flashing light

Hello ebulloc,
It sounds like you are getting the flashing amber colored light and cannot connect to the internet with it. According to this article:
AirPort base stations: About AirPort base station status lights (LED)
http://support.apple.com/kb/ht4600
Flashing amber
Startup is complete, but the Wi-Fi base station has detected a condition that requires your assistance. To resolve flashing amber status light conditions click here to learn more. Launch AirPort Utility to find out what conditions are being reported.
This article should lead you to a resolution:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/TS1589
Thank you for using Apple Support Communities.
Take care,
Sterling

How to connect my ipod to itunes if my ipod is disabled and my top button is broken

how to connect my ipod to itunes if my ipod is disabled and my top button is broken

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

iOS: Unable to update or restore

Exchange 2010 all mail clients with internal cached and internal non-cached mode users having connection status issues, login prompt -- external is fine either way

Hello,
I'm seeing an issue that started this past Monday with no recent change to our environment.
External Outlook Anywhere users and Mobile users, OWA users are unaffected.
Internal Users are affected when using Outlook of any version, 2010 or 2013.
-Internal Users normally log into their workstation with their ad credentials, domain joined machines. Outlook opens without credentials prompting ideally.
1 . Using Cached Mode:
a. Login Prompts, slowness - Since Monday, users are getting prompted to login. The prompt goes away after logging in at startup. It is also causing high CPU
on the workstations.
b. Free/Busy, Out of Office doesn't work. I can, however complete auto-setup for a new user, so autodiscover is not completely down for internal users.
c. Checking Connection Status shows connecting status on highlighted entry below without ever establishing connection (just goes away).
The outlook icon in the system tray says "Outlook is requesting data from the server":
2. Using Non-cached mode
a. No Login Prompt at startup, business as usual
b. Free/Busy, Out of Office works fine. Autodiscover is fine.
c. Checking Connection Status shows normal except, it has "casarray URL, then status is referral" it seams to flicker this constantly then go away intermittently.
d. Main issue in non-cached mode is, sometimes a user will log into windows, open outlook and it will not open and says "server is unavailable. Retry, work offline, or cancel" I can try re-opening, same message.
Only after logging out of windows, logging back in, I can get back into outlook. This is not every time, or consistent with specific users, but random.
3. Lync Pop up for credentials often, though entering the password.
URLs are correct. Autodiscover, EWS, etc.
Already tried bypassing our loadmaster load balancer with host files on clients. same issue regardless of casarray node.
Not sure what is going on.
Josh

You have a hybrid configuration with Office 365, right? You didn't provide this valuable piece of information.
In Exchange Online PowerShell run this command:
Get-OrganizationConfig | FL PublicFoldersEnabled
If the value is "Remote" then users with Exchange Online mailboxes are looking to on-premises public folders. Be sure that you have legacy pubic folder interoperability properly configured.
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do?

Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT3302 My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

So i connected my ipod shuffle to my apple computer and the status light on my ipod shuffle shows that it is charging but when i look for it on the pc dock or in itunes it doesn't show it at all.... so what do I do???

so i connected my ipod shuffle to my apple computer and the status light on my ipod shuffle shows that it is charging but when i look for it on the pc dock or in itunes it doesn't show it at all.... so what do I do???

If you have not already, I would shut down (power off) your computer. Do this to Reset your shuffle
http://support.apple.com/kb/HT1655
Start up computer. Run iTunes. Connect shuffle.
If you have added a new USB device recently (since the last time it worked properly), you may want to try disconnecting it to see if that makes any difference.

Network Connectivity Status Indicator for IPv6 works wrong in Windows 7 and Windows 8

Hi Folks,
I am working on testing Network Connectivity Status Indicator for IPv6 in Windows 7 and 8.
Waht is "Network Connectivity Status Indicator(NCSI)" you can refer to https://technet.microsoft.com/en-us/library/ee126135%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
I found that even if Network Connectivity Status Indicator detect IPv6 connection to http://ipv6.msftncsi.com/ncsi.txt failed.
Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4.
It will cause IPv6 fallback to IPv4 problem, that's 21 secs and 7 secs delay for fallback in Windows 7 and 8.
Does anyone suffer the same problem?
Or someone know how this works?
Thanks!

Hi Roger_Wang0214,
"Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4."
By default Windows prefers IPv6 over IPv4,we can manually configure the IPv4 prefer over IPv6 if it has result in any troubles.
Here is a link for reference :
Resolving Internet connectivity issues after World IPv6 Launch (June 6, 2012)
https://support.microsoft.com/en-us/kb/2533454
"The "Prefer IPv4 over IPv6" Fix it solution will configure your computer to prefer IPv4, instead of IPv6. By default, Windows prefers IPv6 over IPv4. If you are having problems using IPv6 to connect to some websites, this may resolve the
problem."
For a Windows 7 machine ,we can try the following fixit tool to configure IPv4 prefer over IPv6 .For a Windows 8.1 machine ,we can configure it referring to the manual part .
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
If the DisabledComponents entry is unavailable, we can create it (DWORD (32-bit) Value).Then set a value with "0x20"to prefer IPv4 over IPv6 by changing entries in the prefix policy table.
Here is a link for reference :
How to disable IPv6 or its components in Windows
https://support.microsoft.com/en-us/kb/929852
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

stevejobsfan0123 wrote:
The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
I found that out 2 years ago, it's just that I thought Apple might have changed that.

My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?

1. If you are really on iOS 7.1, you may wish to try upgrading to 8.1.2 which is the latest (basing this on your signature).
2. If updating the phone doesn't help, is this only when you connect to a specific wifi network? Or all wifi networks (including public with no password)? If it is ALL wifi networks, you may have a hardware problem. Genius bar would be the next step.
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID

My Safari Icon ( Button) is missing in my iMac after I downloaded a update. How can I get the icon back on my desktop and connecting again to the Internet ?...

My Safari Icon ( Button) is missing on my iMac after I downloaded a update. How can I get the icon (Button Safari) back on my desktop and connecting again to the Internet ?...
Thanks for the help

Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

UWL at SP13 and Connection status button

Similar Messages

Maybe you are looking for