UWL - conditional accessing of systems

Hello All,
I have configured the UWL system to retrieve data from 2 MDM repositories. Every portal user is not going to have access to both the MDM repositories. How can I stop UWL from retrieving data from both the repositories?
Currently the UWL is retrieving the data from the MDM system for which there is a User Mapping. But for the other UWL is displaying an error message. I need a way to restrict this behaviour (because the error message makes the end user confused).
Thanks in advance,
PKS.

Hi,
when you create a UWL system you have got the possibility to restrict access to this system. Have a look at the parameter "User Roles". There you can determine for which set of users the UWL should access this system.
For example, you can assign a portal role here, such as buyer. Only users with the role buyer will see items from the provider system in UWL. You can have multiple user roles separated by semi-colon.
Find detailed information in the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/92/a88931f2dd4631b9e8d530697d89c9/frameset.htm">SAP Library</a>.
Best regards,
Martin

Similar Messages

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

Field KOMP-ZZPRCTR1 is not known for condition accesses"

Hello friends,
In a sales order if I put the material I got the error below.
"Field KOMP-ZZPRCTR1 is not known for condition accesses"
I am not able to incert that perticular material into sales order.
Kindly suggest how to go ahead.
Regards,
Kunal

Hi,
You need to add the new field ZZPRCTR1 in the KOMP structure using SYSTEM MODIFICATIONS
Please check the system modifications for this
http://www.sap-img.com/sap-sd/add-a-field-to-new-condition-table-in-pricing.htm
regards,
santosh

ICH : SXMB_ADM - F7 Check says "No access to system landscape at present"

Hi
When I perform following :
tcode sxmb_adm -> Integration Engine Configuraion -> Check (F7)
I get "No access to system landscape at present"
This on our ICH-server.
Same check on the PI-server (X) is successful.
The SLD used is the same for both servers. I.e same url-address in "corresponding integration server".
Role of business system for ICH = Application system
Role of business system for PI = Integration server
Anyone that knows how to correct this? Some refresh, cache update or similar that must be performed?
/Regards
Joakim

Hi,
please run transactin sldcheck on the abap to see where the problem is.
Did you :
- run and configure transaction sldapicust
- the rfc connection pointing to the sld server
Kind regards,
Andreas

No access to system landscape at present

Hi
I am trying to establish connectivity between ECC and PI. I am in SXMB_ADM of ECC and under Global Configuration Data, I put the role of business system as Application System. Now when I click on the Systel Landscape, I am getting an error " No access to system landscape at present". How should I solve this?
What do I enter next to corresponding Integ server ?
Regards

Hi,
Check in SLDCHECK, from R/3 side, if everyhting is ok.
You may want to check:
#1143810 - Troubleshooting SLDCHECK - Releases 71X
Second point, check note below to about the components in SLD, if they are correctly registered.
#1334053 - No automatic PI 7.10 SLD Registration
And take into account the following notes mentioned in the note above:
#1117249 - Incomplete Registration of PI components in SLD
#764176 - Error in XI due to inconsistent SLD contents
Last recommendation, open the Exchange Profile and change all parameters that ends in *.name to FQDN, and don't forget to restart the system to activate the changes.
For more information about the FQHN, check the notes below:
#773830 - FQHN determination in ICM
#654982 - URL requirements due to Internet standards
Also ensure to apply the FQHN as per instructions on the note below:
#804124 - HTTP communication with XI Adapter Engine fails
And check for the parameter 'com.sap.aii.connect.integrationserver.sld.name' from note:
#1278563 - Specification of message server host in Exchange Profile
Regards,
Caio Cagnani

[Integration Engine Configuration Data] Error: No access to system landscap

Hi all,
When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
No access to system landscap
So that we can't load configuration from our System Landscape.
We have correctly configured other below:
     - We use http port for corresponding Integration Server.
     - Business System with role 'Integration Server' created correctly in SLD.
     - T-code SLDCHECK is all OK.
     - T-code SXI_CACHE is all OK.
Anyone can please help me correct this error ?
Point will be reward for any valuable answer,
Thanks a lot,
Vinh Vo

Please can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
just check the reply from Udo and jai's reply
R3 Connecte XI 3.0 Problem
also check page no 18
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283

Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

Link does not work for
End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
How do we get Cisco to fix?
see attachment

Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

Access to system perferences from second account

Can not access the system preferences folder from the second account setup on the Mac. I am a new user to the apple system but have many years with the other system. Gave the second account Admin status. Need to change the touch pad tap function for the second account.

Did you migrate accounts from a PPC Mac? Are you accessing the application from the /Applications/ folder or from /Home/Applications/ folder?
I do not think you are accessing the same file since the application cannot be an application icon on your account and a folder icon on hers since the application is the same one in the same Applications folder.

System has amnesia about non-admin access to system log

Time Machine Buddy often doesn't show current backups. So I used the tip from Pondini to give my user account system log access. That worked fine.
But it doesn't "stick." I fired up the Console app this morning, and the system log is grayed out.
Any idea why, and what to do?
Thanks,
Harv

Hey James,
I did indeed get a reply in the Unix forum, and it worked fine. Here's the content:
*BobHarris posted "Re: System has amnesia about non-admin access to system log" in "System has amnesia about non-admin access to system log" on Jun 2, 2010 6:21:28 PM.*
*You could try*
*sudo /bin/chmod +a "harv47 allow read,file_inherit" /var/log*
*This assumes that your usename is 'harv47' on your Mac. This also assumes that the log files are created in the /var/log directory.*
*In theory this will make sure that any file created in /var/log will inherit an ACL that allows harv47 read access to that file.*
*However, I have not spent much time working with Mac OS X ACLs, so your mileage may vary.*
*BobHarris posted "Re: System has amnesia about non-admin access to system log" in "System has amnesia about non-admin access to system log" on Jun 2, 2010 8:13:24 PM.*
*Oh yea. You can view the ACL you applied, and see if the inherit_file worked using*
*ls -leO@a /var/log*
*again, assuming /var/log is the directory containing the log you are trying to read.*
The system log continues to be accessible, even after the midnight "rollover."
I'm a happy camper. I'm not sure if it's a coincidence or not, but TM Buddy has so far continued to show the log excerpts after the rollover as well.
BTW, the SpamSieve app (Bayesian spam filter for Mail) is one of those database apps mentioned in your tips. It accounts for about 1 GB every backup.
Thanks!
Harv

Kerberos Configuration Manager for SQL Server: Access of system information failed!

I'm trying to use the new Kerberos Configuration Manager for SQL Server tool that was released recently to verify SPN on several SQL Servers, but any time I attempt to connect to a server I get the following error in the log:
6/24/2013 3:48:22 PM Info: Connect to WMI, \\<HOSTNAME>\root\cimv2
6/24/2013 3:48:25 PM Error: Access of system information failed System.DirectoryServices.AccountManagement.PrincipalOperationException: An error (1332) occurred while enumerating the group membership. The member's SID could not be resolved.
at System.DirectoryServices.AccountManagement.SAMMembersSet.IsLocalMember(Byte[] sid)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextLocal()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/24/2013 3:48:25 PM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)
Things I have tried to resolve this:
1. Verified that my account is a Domain Admin.
2. Attempt to connect locally without inputting any information for server/user/pw
3. Attempt to connect remotely using server/user/pw
I always receive the same error message and log: Access of system information failed!
Has anyone else run into this issue?

Update to this:
There were some invalid user accounts added to the Local Administrators group only showing up as a GUID. This caused the enumeration of the group to fail and generate the error in my original post. Removing those user accounts from the Administrators group
got past the enumeration error.
However, now when attempting to connect to the servers (locally or remotely) I get this error:
6/27/2013 10:24:24 AM Info: Connect to WMI, \root\cimv2
6/27/2013 10:24:38 AM Error: Access of system information failed System.Runtime.InteropServices.COMException (0x80070035): The network path was not found.
at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
at System.DirectoryServices.DirectoryEntry.Bind()
at System.DirectoryServices.DirectoryEntry.get_AdsObject()
at System.DirectoryServices.PropertyValueCollection.PopulateList()
at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
at System.DirectoryServices.AccountManagement.SAMStoreCtx.ResolveCrossStoreRefToPrincipal(Object o)
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNextForeign()
at System.DirectoryServices.AccountManagement.SAMMembersSet.MoveNext()
at System.DirectoryServices.AccountManagement.FindResultEnumerator`1.MoveNext()
at System.Linq.Enumerable.Contains[TSource](IEnumerable`1 source, TSource value, IEqualityComparer`1 comparer)
at KerberosCM.WMIHelper.isUserLocalAdmin(SystemInfo si, UserPrincipal user)
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
6/27/2013 10:24:38 AM Error: Error System.Exception: Access of system information failed!
at KerberosCM.WMIHelper.getUserInfo(SystemInfo mi)
at KerberosCM.SystemInfo.GetInfo()
at KerberosConfigMgr.Utility.Login(String serverName, String login, String password, Boolean isCmdLine, Form uiForm)

How do you get permission for FlexLm/HASP to access the system clock?

I've got animation software that accesses the system clock to verify a security dongle. It works fine under 10.4.3, but I recently got a dual processor G5 with 10.4.5 on it. According to the s/w tech people, the dongle mgmt s/w doesn't have permission to access the system clock because of new security fixes. Anybody have any idea how I can open permissions to the system clock so I can get back to work?
Thanks for any help you can offer...
Brian

Moving this discussion to the Using Flash Builder forum.
I believe the software though is working as designed. From previous discussions I have seen the Design view was removed in Flash Builder 4.7. The users in this forum may be able to provide additional information around this.

Integrating with external access control system

Hi,
I am new at the network but have read a lot recently about the above subject as much as I could. However, I am a bit mixed up at something. I understand in order to update SAP HR module with employees time and attendance logs I need to interface with a certified PDC interface => (SAP ECC - PLANT DATA COLLECTION - TIME & ATTENDANCE AND EMPLOYEE EXPENDITURES (HR-PDC)
I wish to develop a system that updates the the SAP HR with employee attendance logs. In addition I also wish enroll new employees into my access control system database by polling the SAP HR database.
Now my question is if I use .NET connector:
1. Does the connector it include functions that can help with the above requirements?
2. Is the use of PDC interface here still a must?
Thanks

For time management with the help of transaction pt80 you can download the information about employees with the help of idoc. And there are some programs a.k.a connectors that link access control systems and SAP so that you do not hire the same employee in the access control problem. You hire the employee in SAP and SAP sends the information (HR Minimaster DATA) to the related program.
It is also do the same thing for the employees who resign. I mean if an employee is fired or resigned from the company than it is sent to the related system.
These can be found under PDC integrated systems. You can find information about the systems from Ecohub. http://ecohub.sap.com/
I hope this answer will help.

Bought a mac for my sons bday present of eBay :( it starts up in osx utilities screen, iv never seen the actual desktop(launch pad) I dnt know how to access the systemI know the basics for start up but says to delete files so I can dwnload the software?

AS above states the computer seems to run normally as far as turning it on, tabs & pages are fine. But I can't access the system to delete some files.. Which is what the 'error' keeps saying everytime I tr and download a helpful link/app or software.. The instal disc that seems to be stored on the comp says its mountain lion 10.8 install disk 'read only' & this is the only disc it gives me to select to startup.. I have the full software on USB as its very large.. So .. PLEASE TELL ME finally,
HOW to ... Access comp files to delete required memory for software install?? If this is the best option..
HOW to ... Erase everything on computer & install 10.8 via USB?
And when or what enables me to see and use this computer correctly..ie, launch pad? Etc..
PLease reply back in 'normal terms' as I'm already exceeding my boundaries of imac knowledge

First: no, you cannot use someone else's install DVD unless it is a retail version; all others are machine specific. It will not work and would be illegal.
Is this what you bought?
http://www.everymac.com/systems/apple/imac/specs/imac_cd_2.0_20.html
IF that is correct, then you are not on 10.8 because the highest OS it can go to would be 10.6
So, you'd either need the original install disks (preferred) or buy a retail Snow Leopard (10.6) - that is as high as you can go with that machine. And, your maximum RAM is 2 GB, so you couldn't go higher with the OS because of that either because it would not run well on 2 GB.
If you do get 10.6, then I'd suggest increasing the RAM to the max. of 2 GB.
If this is not the machine you got (maybe the seller just used any old box), then I'd suggest taking it to an Apple store/Genius Bar to have them sort out how to get out of this mess.

Applet access to system Clipboard

Hi all:
I am creating a customized version of the mud telnet application for a customer. They have requested cut/paste functionality and I have been able to provide this capability. The problem is the applet cannot get access to the system clipboard so all cut/paste functions can only occur within the applet. I am able to access the system clipboard by creating a java.policy file and setting a permission. The problem is that most of the workstations, and a good number that will be using home computers running Win 98. They don't want the users to have to download the new JRE from Sun (although I know this works). I am looking for a way to creat a JAR file using the old JDK 1.1 (or the current toolkit if it is possible) that will allow access from the Applet to the System Clipboard. I have search the web for an answer, with no success. Can anyone give me any suggestions?
Anybody had to do the same thing before?
Thanks.
John Kreiner

I know this is an old thread, but I thought I would answer it.
To access the clipboard via an applet, you need to use JavaScript.
The first thing to do is to create a class that uses reflection to use the JSObject. The reason why reflection is used is because it is a pain (ITA) to specify a compatible binary for eacy java version (e.g. java40.jar, plugin.jar, jaws.jar, etc). Here is the class:
import java.lang.reflect.*;
import java.applet.Applet;
public class JavaScript {
     public static void call(Applet applet, String methodName, Object[] param) {
          try {
               Class js = Class.forName("netscape.javascript.JSObject");
               Method callMethod = js.getMethod("call", new Class[] { String.class, Object[].class });
               callMethod.invoke(getWindow(applet), new Object[] { methodName, param});
          } catch (Throwable t) {}
     public static Object getWindow(Applet applet) {
          Object o = null;
          try {
               Class js = Class.forName("netscape.javascript.JSObject");
               Method getWindowMethod = js.getMethod("getWindow", new Class[] { Applet.class });
               o = getWindowMethod.invoke(null, new Object[] { applet });
          } catch (Throwable t) {}
          return o;
}Now, when you want to copy something to the clipboard, you will do:
JavaScript.call(someApplet, "copyToClipboard", text);
BUT the "copyToClipboard" function has not been defined yet. This will be a JavaScript function in the html:
<script language="JavaScript1.1">
function copyToClipboard(text) {
     document.myForm.myInput.value = text;
     var rng = document.myForm.myInput.createTextRange();
     rng.execCommand("RemoveFormat");
     rng.execCommand("Copy");
</script>And one last thing is that a JavaScript text component is required in order to create the "rng" variable. To do this, use a hidden field in the html:
<form name="myForm">
     <input name="myInput" type="hidden">
     </input>
</form>

When clicking websites my Avast 5.0 antivirus notifies me that a malicious URL is trying to access my system or that a Trojan has been prevented from access. The attempted Malware/Trojan is always from the same address:[Ticon.in/nte/kuz/.exe/xhdoe515bvo3

suspicious Maleware / Trojan.
== This happened ==
Every time Firefox opened
== I tried to access a website

Hello "Morbus",
Thank you for your quick and informative reply. First I would like to provide more information on this attempted Malware/Trojan. I have copied the full addresses for you and/or anyone who may have interest. It follows below.
28.06.2010 07:38:00 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\program files\Mozilla Firefox\Firefox.exe ( 5436 ) ]
28.06.2010 08:14:44 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 4476 ) ]
28.06.2010 13:32:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 1988 ) ]
28.06.2010 17:51:53 Network Shield: blocked access to malicious site 楴祣湯椮⽮瑮⽥畫⹺硥e [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5400 ) ]
29.06.2010 13:31:03 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 2444 ) ]
29.06.2010 23:15:14 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 480 ) ]
30.06.2010 09:36:22 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 5164 ) ]
30.06.2010 22:31:52 Network Shield: blocked access to malicious site ticyon.in/nte/kuz.exe/wHd0e51a5bV03006f36002Ra38dbe4f108T9ccfa9f8Q000002fe901801F0035010aJ14000601L656e2d55530000000000 [ C:\Program Files\Mozilla Firefox\Firefox.exe ( 3600 ) ]
I had failed to mention in my previous comments that each time the attempted attacks took place, a blank Adobe PDF page appeared. As you suggested, I disabled the Adobe add-on and have had no further attacks. I am extremely dilligent in keeping my SuperAntiSpyware Pro, AvastAntiVirus 5.0, ThreatFire, Vista Firewall Control, Malewarebytes and Windows Defender up to date. However, after any attack I always run these in safe mode just as a precaution. I had suspected the Adobe drop-in may have been the culprit because of the page that appeared and your suggested fix has in fact fixed it!
Thank you again for your unselfish time in coming to my rescue. "Deaf Dave"
From: [email protected]
Date: 7/1/2010 12:53:40 PM
To: [email protected]
Subject: Reply notification: when clicking websites my Avast 5.0 antivirus notifies me that a malicious URL is trying to access my system or that a Trojan has been prevented from access. The attempted Malware/Trojan is always from the same address:[ticon.in/nte/kuz/.exe/xhdoe515bvo38d
"Morbus" has posted a reply to a thread you're watching.
You can view the thread and reply at the following URL:
https://support.mozilla.com/en-US/forum/1/714170#threadId714337
Message:
Hello Deaf Dave.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
Also, it's possible that your system is infected with malware. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.
Did this response solve your problem with Firefox?
Yes, this solved my problem (click here):
https://support.mozilla.com/tiki-feedback.php?id=714170&hash=6d5f163b3092b464aa15d04188b5cca2&type=forum_topic&feedback=Firefox%20Support%20Forum&commentId=714337
No, this did not solve my problem (click here):
https://support.mozilla.com/en-US/forum/1/714170?hash=6d5f163b3092b464aa15d04188b5cca2#form
If you no longer wish to receive notifications for this thread,
visit the following URL to cancel your subscription:
https://support.mozilla.com/tiki-cancel_watch.php?section=forum&hash=6d5f163b3092b464aa15d04188b5cca2

UWL - conditional accessing of systems

Similar Messages

Maybe you are looking for