UWL configuration for Federated Portals logging errors in defaultTrace
Hi everyone,
I've just finished configuring UWL for Guided Procedures on federated portals using the help provided in the links below:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/904ca240-63bc-2a10-1c98-de81b6a045bf|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/904ca240-63bc-2a10-1c98-de81b6a045bf]
[http://help.sap.com/saphelp_nw70/helpdata/EN/43/ef06a7860c7061e10000000a1553f6/content.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ef06a7860c7061e10000000a1553f6/content.htm]
Everything is running very well except for the fact that exceptions for the GPsystem I created are showing up in the defaultTrace log. The message repeats itself several times:
03/12/2009 , 15:56:12:234 , GPsystem | ACCESS.ERROR | null | | Permission=(com.sap.caf.eu.gp.model.permission.GPPermission GP.GET.WORKITEMS) , Error , /System/Security/Audit , com.sap.security.core.util.SecurityAudit , sap.com/cafeugpmodeleap , GPsystem
These log traces repeat themselves so many times that they seem to be causing an unnecessary load on the system. Other that that, both the Guided Procedure and UWL are working perfectly. Does anyone have any idea as to why this might be happening?
Thank you very much,
Luis
Hi
UWL Configuration is not proper so only this happening.
Refer the [Link1|https://wiki.sdn.sap.com/wiki/x/IwBbAQ ] [Link2|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45] [Link3|http://help.sap.com/saphelp_nwce10/helpdata/en/05/fe8ef669674991a4205666694b9c85/content.htm] .
Regards,
Surjith
Similar Messages
-
Want to delete all the mails in the mail box configured for BPM Portal
Hi All,
Do you have idea to perform this activity.
I want to delete all the mails in the Dev mail box configured for BPM Portal.
Server and mailbox details as given below :
Mail a/c = Y00123
Mail server = sap.mail.com
Thanks, Sanjayhttp://java.sun.com/developer/onlineTraining/JavaMail/contents.html
http://www.jguru.com/faq/view.jsp?EID=17035
if you know the password of the account, i think you can also access the mail using mail client, like you use outlook to deal with your company mail daily. -
Federated Portal Network - Error-"Unexpected Error - Unable to get IView
Hi,
I have configured FPN with EP and BI, both are on same SP level.The connection and the producer registration is successful.
The producer contents can be navigated in Consumer and I can able to copy and paste the producer content in the consumer.
But when I see the preview the content it shows error "
500 Internal Server Error
BEx Web Application
Faile to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Unexpected error - Unable to get IView:fpn:<consumer>/pcd:portal_content/Iviews_ID/BTMP_20110425_065001:NFd1NOBZQUPn2gQkVO65Lw%3D%3D:1:
I have checked the following thread, but I'm not able to find out solution,
Federated Portal Network - Unexpected Error - Unable to get IView
what could be the reason,
Really appriciated for your reply.
Regards,
Mahee.Hi Shanti,
Thank for reply.
I have checked with same user in both consumer & producer portals, In that case its working fine.
If you checked with other consumer users its asking password.
For this I have tried usermapping with producer id under goto personolize -->remote iviews --> select default alias -->enter id/pwd and save for other consumer id.
How we manage for all consumer users, is there any option to mapping to all users at time.
really appriciate your inputs.
Regards,
Mahee. -
Test IVIEWS in Consumers for Federal Portal.
Hi All,
This is the first time iam establishing Federal Portal and i have done with all the configuration steps ie
Setting Truct , SSO , creating and registering of Consumers and Producers etc.
Now i want to check it by creating some iviews etc.. But i dont know and not getting how to create it and test.
Could any body telthe steps to create I views in Consumers and how to test SSO and how to use COnsumers.
Points wil be assigned.
Thanks in Advance.
Regards,
Akash..Hi Akash,
Steps you need to take:
- Setup trust between consumer and producer portal by exchanging certificates and making Visual Administrator entries in the Security Provider Service.
- Create producer.
- Register producer.
See this document for good descriptions of steps to take:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70191d1e-2bd1-2a10-d9b7-ba19500da527
Also for remote role assignment in NW 7.0 SP15 you need to add some UME Actions to a role that is aasigned to pcd_service user. See following link for the material:
http://help.sap.com/saphelp_nw04s/helpdata/en/43/2236fc0b413fe1e10000000a11466f/frameset.htm
Please have a look and reward points if helpfull. Good luck!
Best regards,
Jan Laros -
LDAP configuration for HR Portal in dual stack EHP4 - Best Practice
Hi Experts,
Hello Experts,
We are trying to use the JAVA Stack of ECC server for HR Portal i.e Dual Stack and have applied EHP4 package for ESS/MSS Appraisal. When we are trying to configure the LDAP ADS datasource through portal , we are not able to do it since ABAP datasorce file is available by default.This we are doing for HR(ESS/MSS) Portal.This is for access to the object data stored in the Active Directory.
We have already checked note 718383.
Also, for the scenatrio ,LDAP <-> ABAP <-> J2EE
We have already checked sap help doc.here:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/e6/0bfa3823e5d841e10000000a11402f/frameset.htm
What should now be the best practice to follow for configuration ? Should we go for separate Portal server or is it possible to use Java Stack of ECC server for configuration ?
Also, LDAP <-> ABAP <-> J2EE scenario please suggest if it a best practice and we can follow the same .What are the limitations , risks and issues ? Please suggest if this has been implemented and running well in any live project .
Are the suggestions applicable for load balanced production servers as well?
Thanks,
RakeshHi,
the UME datasource must remain ABAP but you can sync the users between ABAP and LDAP using the LDAP connector:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/48/74040175bb501ae10000000a42189b/frameset.htm
Regards,
Jozsef -
Configurations for extracting portal activity data from netweaver portal.
Hi,
I need to fetch the portal activity data from the portal into Solution Manager. I would like to know the configurations on the portal that will be needed in order to extract the portal actvity data . How will i proceed extracting the portal activity data?
thanks and regards,
Divya.Hi Divya,
We can not say that Early Watch Alerts is same as the the portal activity report.
Its a diagnosis service, for the solution monitoring of SAP and non-SAP systems
in the SAP Solution Manager. Its gives you the complete details of your System.
If we talk about Portal then you can get the details like :
1. Java Heap details
2. Memory Uses
3.Portal Objects access details (Like Activity report )
4.Server Nodes details
and many more things.................
The Underlying concept is to ensure smooth operation of individual SAP Systems
by keeping you informed of their status and allowing you to take action,
before severe technical problem occurs.
Check the below link for ewa:
[SAP EarlyWatch Alert overview|http://www.mediafire.com/?gilijcnnwet]
[SAP EarlyWatch Alert|http://help.sap.com/saphelp_sm40/helpdata/en/87/50cce344ae495bae240add66a28ed7/content.htm]
[Using SAP EarlyWatch Alert|http://help.sap.com/saphelp_sm40/helpdata/en/5a/b27f17edb04a6882c59f6619a267b9/content.htm]
Regards,
Piyush -
Error in UWL configuration for MSS in portal..
HI,
I want to configure UWL in portal so that I can see/approve leave in UWL in MSS. Please let me know how to configure the same.
When I am trying to configure the UWL in system admin> system configuration> Univerasal Worklist Administration, under that i clicked in new button to add my R/3 system, in that popup i mentioned my system alias name of R/3 system and connector as Webflow connector and remaining field i kept as empty and i clicked on save button after that when i click on Register button OR Register item type for all system than I am getting the following error, please let me know what the issue is ?
Error is:
Errors:
System SandBoxCLNT300: Wed Mar 16 09:18:38 IST 2011
(Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Wed Mar 16 09:18:38 IST 2011
(Connector) :com.sap.portal.connectivity.destinations.PortalDestinationsServiceException:User is missing credentials for connecting to alias SandBoxCLNT300. Contact your system administrator.
SandBoxCLNT300 is the system alias of system I have created for R/3. in that system object I am using logon ticket.
Also when i try to test that system , SAP Web AS Connection AND ITS Connection connection are tested properly with green tick but the third parameter Test Connection with Connector is failing and the error is
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Also the transaction iview i created using this system object is coming absolutely proper, than why Test Connection with Connector is failing , please let me know , might be UWL issue is related to this one..
ThanksPlease first let us know if you have done the configuration as per
the Note 779075, Please do this and re register the work items and
let us know.
Make
Check the configuration of SAP_WebDynpro_XSS
Here is the help documentation:
http://help.sap.com/saphelp_nw70/helpdata/en/92
/a88931f2dd4631b9e8d530697d89c9/content.htm
in regards to this parameter.
IF the LeaveRequestApprover application is deployed on the SAP_Local
System, you needed the system alias of SAP_LocalSystem in the
Webdynpro Launch System value. With this setting when the user
manager clicks on the item, it will work fine.
the system SAP_Webdynrpo_XSS should have maintained the WAS properties
with the port of the portal. This is for normal working for
Leave request
"Mapping Logical Systems" in the following documentation:
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/2a/7a754297fdd142e10000000
a1550b0/content.htm
and the "sap-wd-arfc-useSys" bullet point in the following
documentation:
http://help.sap.com/saphelp_sm32/helpdata/en/f4/651741f163f023e10000000a
155106/content.htm
See in bold where it mentions that "The prerequisite for this is that,
in addition to the default JCo connections, you created the new logical
system name with the Web Dynpro Content Administrator and configured it
for the required SAP system." Meaning that there needs to be a JCO
Connection for "SAP_R3_SelfServiceGenerics_MetaData" since these are
the default JCo connections. In this case I kindly ask that you create
the default metadata and model JCO connections for
SAP_R3_SelfServiceGenerics and see if that resolves the issue. -
Federated Portals: SOAP Error
hi experts,
I have done all the required configurations as mentioned in many posts and on hellp.sap.com (viz setting up sso, trust relations, the visual admin configs and permissions on portal obejcts). however when i try to view the content from the remote system the following error gets logged in the trace file of the consumer
The user authentication is not correct to access to the portal service com.sap.portal.prt.soap.Bridge or the service eas not found
I am trying to acheive federationb between EP7 and BI 7.0 both on SP 12.
KIndly assist> I checked the WSDL file and all seems correct...any
> other ideas.
Hi,
WSDL has no role in the process after the registration took place.
Please make sure that the end user exists on the producer portal and that you logged in at least once before invoking federated scenario.
Avi. -
Guest User permission for Federated portal setup
Hello SDNers,
I am trying to setup Federation between two portals. Both the portals are in the same domain and use the same LDAP user data source.
Both the portals are on NW 7.0 EHP1 SP 05.
I am following the online help and few other links. I have followed all the steps explained.
SSO and trust between portals is properly setup and is validated.
The point where I am stuck at is with the permissions on the producer portal for the "Guest" user.
If I assign Super Admin role to the Guest user in the producer portal, every thing works fine. I can see the roles in Consumer portal for Remote Role Assignment and also I am able to do Remote Delta Links.
However, this is not anticipated. (We cannot assign super admin to Guest user)
If I remove the Super Admin role to the Guest user in the producer portal, every thing breaks - I cannot see the remote roles from Consumer portal, I cannot see any content under Netweaver Content Producers for the given producer.
I have given "Everyone" group - read access to everything below "Portal Content" folder both on producer and consumer portals.
PCD_Service user is assigned the actions Remote_Producer_Write_Access and Remote_Producer_Read_Access in both portals.
Log says:
Call failed
EXCEPTION
SOAP Fault Exception (Actor SAPEPP) com.sapportals.portal.prt.service.soap.exception.SoapFaultHandler] : The User Authentification is not correct to access to the Portal Service com.sap.portal.prt.soap.Bridge or the service was not found.
My Questions are:
1. What does Guest user have to do in the whole process - Where it is exactly used ?
2. How can I give Guest user the required permissions (especially to portal service com.sap.portal.prt.soap.Bridge) ?
Please suggest.
Thank You ,
Raj KumarNo cross posting.
Read the "Rules of Engagement"
Regards
Juan -
UWL configuration for decision step
Hi!
We are using the decision task for approving trips (TS200000118).
We've to add a decision note as described in this forum (UserDecisionNote).
How do I get the standard xml for this step to modify this.
I just found the entries in the uwl.webflow:
<ItemType name="uwl.task.webflow.decision.TS20000118.mandant086" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="viewDetail" executionMode="default">
<ItemTypeCriteria systemId="mandant086" externalType="TS20000118" connector="WebFlowConnector"/>
</ItemType>
Kind regards and thanks for any hints!
PeterHi Peter,
As you are already aware of UWL supports a property called UserDecisionNote for the UserDecisionHandler action and can configure the XML file of UWL for this.
For example:-
Can add the following in UWL xml configuration file. And then upload the xml file.
<ItemType name="uwl.task.webflow.decision.TS90100366.SAP_ECC_FINANCIALS.SAP_ECC_Financials" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="viewDetail" executionMode="default">
<ItemTypeCriteria systemId="mandant086" externalType="TS20000118" connector="WebFlowConnector"/>
<Actions>
<Action name="send" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
<Properties>
<Property name="decisionKey" value="1"/>
</Properties>
<Descriptions default="send"/>
</Action>
<Action name="reject" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
<Properties>
<Property name="UserDecisionNote" value="true"/>
<Property name="decisionKey" value="2"/>
</Properties>
<Descriptions default="reject"/>
</Action>
</Actions>
</ItemType>
Please refer to [link|http://help.sap.com/saphelp_nw2004s/helpdata/en/7a/df014b037141ca9afc6433ed42b519/frameset.htm].
Thanks
Arun Singh -
UWL configuration for travel and leave
Hi,
Can anyone guide me on configuring leave and travel workflow and UWL connectors.
We have deployed ESS/MSS .
HR is configured in SAP ECC. Workflows are configured. I want to integrate to UWL.
I am very new to UWL , so i need steps from start to end like connectors creation and RFC creations etc
Thanking You,
JessiFor a good overview I suggest you [Look at this|http://www.google.com.au/url?sa=t&source=web&cd=1&ved=0CBQQFjAA&url=https%3A%2F%2Fcw.sdn.sap.com%2Fcw%2Fservlet%2FJiveServlet%2Fdownload%2F113876-4-51769%2FTop10RecommendationsUWL.pdf&ei=lSe2TOeQIY-yvgOdkICTCQ&usg=AFQjCNGLZGdkgGlY6T3CZOtfiYTJEIvA-A&sig2=MbZCgJbLaXEkL4ihq-ZYBw]
The help guide tells you how to do the basic configuration: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
BRgds,
Simon -
UWL Configuration for KM Resources
We are creating XML documents in KM folders using custom PAR file based iViews. These XML documents do go through approval process. When a notification received by an approver in UWL, the link the task is opening XML document in browser. Instead, our requirement is to open this document using another custom iView (that reads this XML document and displays the data in formatted HTML fields).
Please note that each KM folder stores different type of XML content. Thus, all documents in the same folder should be opened with one specific iView.
Is it possible do the above using standard configuration? If so, please advice on how we do it? Any documentation, guidance, info would be highly helpful.
If configuration task is not possible, is it possible to do the same by any custom coding? Please advise with additional info.
ThanksHi Leena,
Could you please tell me how did you solve the issue.
Regards,
Ramesh -
XML UWL Configuration for custom structure in container
Dear UWL experts,
We are adding a structure type: ZPRC_UWL_CUSTOM with 10 fields to a Workflow Task container and call it V_UWL_CUSTOM
Inside the structure, there are several fields called, for example:
V_OBJECT
V_SUBJECT
V_AUTHOR
We have trying hard, but we cannot find a way to make reference to the V_OBJECT, V_SUBJECT and V_AUTHOR fields from the UWL XML.
We tried things like:
<CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
<Attribute name="V_UWL_CUSTOM" type="string" displayName="V_UWL_CUSTOM"/>
</CustomAttributeSource>
<CustomAttributeSource id="ABAP_BOR" objectIdHolder="V_UWL_CUSTOM" objectType="ZPRC_UWL_CUSTOM" cacheValidity="final">
<Attribute name="V_OBJECT" type="string" displayName="Object Name"/>
</CustomAttributeSource>
Could you please help us here?
Thanks and kind regards,
Sergio Martinez
Edited by: Siralos on Oct 31, 2011 3:38 PMHi,
I only can assume how things are in your system, but I hope that you have a container element V_UWL_CUSTOM in your workflow container. Then you are binding it to the task container V_UWL_CUSTOM, right?
If the above is correct, then you need to create individual elements in your task container:
V_OBJECT
V_SUBJECT
V_AUTHOR, etc.
Do binding from workflow container to the task container:
V_UWL_CUSTOM.V_OBJECT -> V_OBJECT
V_UWL_CUSTOM.V_SUBJECT -> V_SUBJECT
V_UWL_CUSTOM.V_AUTHOR -> V_AUTHOR
Etc.
If you cannot do the binding from workflow container (=you don't have the element in WF container because of some strange reason), then things get a bit more interesting...
Regards,
Karri -
UWL in Federated Portal Network
Hi All,
Can anyone please suggest how UWL works in case of Federated Portal Network? I have a requirement to show the tasks, alerts, notifications from more then one Producer in the same UWL iview on Consumer.
I followed the steps as mentioned in the SAP help document Running the UWL in the Consumer Portal http://help.sap.com/saphelp_nw70/helpdata/en/45/8084e2e8c9487fe10000000a114a6b/frameset.htm but no luck.
I would appreciate if anyone can let me know the proper process for doing this or could provide any document for it.
Thank you in advance.
Regards
Seema Rane.Hi Seema,
There are two ways to configure UWL on the federated portal:
1. Run UWL on the Consumer Portal:
a. Everything must be copied over, including xml files. Retrieve information directly from the backend. Use the IviewLauncher Handler. This uses the remote delta link from the producer.
Have a look here at the help documentation:
http://help.sap.com/saphelp_nw70/helpdata/en/45/8084e2e8c9487fe10000000a114a6b/content.htm
2. Run UWL in Producer Portal:
a. Here the configuration is predefined.
b. Use remote role assignment or remote delta links
producer remote delta links should be available as remote delta links on the consumer.
copy as remote delta links; config is done on the producer
Have a look here at the help documentation:
EP7
http://help.sap.com/saphelp_nw70/helpdata/en/45/81ab2f3bab6975e10000000a114a6b/content.htm
(for nw701, 702, 720 search the help documentation accordingly)
I hope that this information is helpful to you.
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq *** -
Hi,
Can someone tell me how to configure the UWL on a federated portal? We want a central UWL (uwl of federated portal and the uwl's of the producers). How can this be achieved?
I already tried the following link : http://help.sap.com/saphelp_nwesrce/helpdata/en/45/8084e2e8c9487fe10000000a114a6b/frameset.htm
Thx!
Regards,
JonasHi,
I don't have any real experience on configuring UWL into the federated portal, but just by knowing the basics and checking the document that you linked, I am pretty sure how it works.
1) Basically you need to go into the consumer portals and download the relevant XML configuration files (in System Admin -> System Config -> UWL). This should be clear if you are familiar with non-federated portal UWL configuration.
2) Then basically you must check what all tasks and workflows there are actually in use in your backend/portal system, and find the corresponding XML configuration for them. Basically you should find that which application is launched when you click a task in your UWL. If they are iViews, write them down, since you will need the info in the following steps.
3) Configure the backend system objects (=similar what you have already in the producers) into the consumer portal. Configure the system objects to be used with UWL (in System Admin -> System Config -> UWL) and register the systems.
4) Now, if you found out that there are some iViews (step 2) that are used in the XML configuration, you should copy them as remote delta links to the consumer from the producer portal. (Copy the pages/roles also if needed - depending on how everything has been setup).
5) Now you are ready to try to import the XML configuration files that you found in the producer portals, into the consumer portal. (in System Admin -> System Config -> UWL)
If all the system objects are found and registered properly in the consumer portal, and all the iViews that are used in the XML configuration files, can be found as remote delta links in the consumer, you should be able to import the XML files and the UWL should be up and running and getting the items from the all producers.
Sounds easy, but maybe isn't.
Regards,
Karri
Maybe you are looking for
-
I have a macbook pro, and a few months ago I had to find some hidden system files. I asked a discussion question, and someone helped me to display all the hidden folders. However, now I can't figure out a way to hide these files again (I no longer ne
-
Here's a wierd one for ya' (JNI - JVM Maladies!)
I'm at my wit's end, sorry for the abstract manner in which I'm going to describe this, I don't have time to write a novel about the intricacies of what the C code described herein does and I'm sure you won't have time to read it. I'm using JNI to wr
-
HT201328 how to unlock my iphone
How to unlock my iphone 4
-
Resolution issue b/w monitors and Internet
I've been working on some night photos I took of the northern lights and I've run into an issue. After doing my usual processing with Photoshop my pictures look the way I'd like them to on my desktop monitor. I then do my usual Convert to Profile--
-
I switched to a backup from LR4 to find some pictures that weren't on my main catalog (had been lost somehow). Now I want to go to my main (big) catalog but can't find it. I've tried a variety of catalogs with the File, Open Catalog command, but not