UWL Configuration Wizard - Empty Dropdown

Hi All,
System Info : EP7 SP18.
UWL Navigation Node Configuration Wizard shows empty dropdown, under the property " Select the Navigation Node To Be Customized. In the UWL documentation , it shows one dropdown as MAIN,however in this case there are no dropdown and as such the below table is not available.
How can I resolve this?
Any help would be appreciated.
Kind Regards,
Vikram Saxena

The work around mentioned in the 'link' provided by Kumar does not work.
SAP has not responded to our OSS Note regarding the UWL Conf wizard not working.
Anyone else know how to get the wizard to work in NW 7.0. We are on SP 20.
Thanks,
D. Maupin
University of Kentucky

Similar Messages

Error after reload the standard XML file in UWL Configuration Wizard

Hi all,
We are working with UWL (EP7sp10) and encountered a problem. The UWL Configuration Wizard gave an error. We found on SDN/WIKI a posting with a workaround (<a href="https://www.sdn.sap.com/irj/sdn/wiki?path=/display/BPX/UWL%2bConfiguration%2bWizard%2bshows%2bempty%2bdropdown">WIKI - UWL Configuration Wizard shows empty dropdown</a>)
We tried this working around, but it did not work. We uploaded the standard XML file again. Now we cannot access the link "Customize the look of the UWL main page" in UWL Administration.
We get a shortdump: 500 Internal Server Error
LOGS & TRACES
Exception occured during processing of Web Dynpro application sap.com/tckmcbc.uwl.ui~wd_admin/UWLControlCenterConfiguration. The causing exception is nested.
[EXCEPTION]
com.sap.tc.webdynpro.progmodel.context.ContextException: dropDownEntryComboMaincom.sap.pct.erp.mss.Alert is not a valid name for a node or attribute
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.validateName(NodeInfo.java:973)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:513)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.addAttribute(NodeInfo.java:534)
at com.sap.netweaver.bc.uwl.ui.admin.wizard.NavigationNodeConfiguration.createTab(NavigationNodeConfiguration.java:830)
at com.sap.netweaver.bc.uwl.ui.admin.wizard.NavigationNodeConfiguration.populateTabs(NavigationNodeConfiguration.java:945)
at com.sap.netweaver.bc.uwl.ui.admin.wizard.NavigationNodeConfiguration.onActionFirstLevelNodeSelected(NavigationNodeConfiguration.java:252)
at com.sap.netweaver.bc.uwl.ui.admin.wizard.NavigationNodeConfiguration.onPlugfromListOfConfigurations(NavigationNodeConfiguration.java:223)
at com.sap.netweaver.bc.uwl.ui.admin.wizard.wdp.InternalNavigationNodeConfiguration.wdInvokeEventHandler(InternalNavigationNodeConfiguration.java:288)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:826)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
It seems getting wrong at: dropDownEntryComboMaincom.sap.pct.erp.mss.Alert
What do I have to do now? Also a clean XML file upload from another SNP installation did not work.
Best regards,
G. Leurs
Message was edited by:
 G. Leurs
Message was edited by:
 G. Leurs

Hi Leurs,
 Try doing the following:
 1. Upload the new Standard XML file from the another portal server with same support version or replace the changes u made to original and upload
 2. Remove the cache
 3. Register for all systems
 4. preview the UWL iView.
Regards,
Vinoth.M

UWL Configuration Wizard shows empty dropdown

Dear experts,
We tried to Customize the look of the UWL main page. But we are unable to see the tabs in dropdown list.
our portal version -
NW 7.0 EHP2
please suggest me on this.
Thanks
Veeranji

Hi Veeranji,
This is happening probably because there is overriding of the root navigation node. This is quite easy to test. With every xml file (other than the standard ones which are all with low priority), remove one by one then check the configuration wizard again. Once you do this and remove the faulty file, you will be able to see the tabs and the Navigation node Main in the dropdown. If you have a look on the wiki page: http://wiki.sdn.sap.com/wiki/x/ehU --> it also mentions how to solve this issue.
Best Regards,
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

500 Internal Server Error in UWL Configuration Wizards

Hi All.
I'm trying to configure UWL view thru wizards options.
Unfortunately it comes with "500 Internal Server Error".
The Root cause section tell me "The initial exception that caused the request to fail, was: java.lang.ClassCastException"
Does any body have a clue how to fix this issue?
Thanks

Hi Sandy,
I am having the same issue, did you resolve it?
Thanks
Jean

UWL Configuration wizard is appearing as blank

Hi,
I Would like to do the customization in the UWL Customization main page. after clicking on the " customize the look of the UWL main page" , .it is appearing as blank . and the drop down is appearing as blank.usually it supposed to be appear as a table with all the tabs of UWL .which allows customization.
if anyone aware of the resolution to this problem, pls let me know.
Rajyalakshmi.

Hi Baue,
download the standard XML file from the system administration. and rename the file and upload it. while uploading the file if you got any popup window saying " default view / anyother view(notification,alerts) "etc. is getting effected do you want to delete........> then dont select any view to delete and click on cancel.
after uploading the file clear the cashe.
Raji.

UWL Configuration Problem

When trying to configure the UWL by clicking the link:
Click to Configure Item Types and Customize Views Using a Wizard, and then in the wizard selecting:
Customize the look of the UWL main page
The Navigation Node Configuration page is not correct. The dropdown list and other controls are not populated.
Anyone know how to fix this?

Hi Paul,
See if this can help:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bpx/uwl%2bconfiguration%2bwizard%2bshows%2bempty%2bdropdown
"Issue :
While using EP7.0 and customizing UWL look and feel through UWL Configuration Wizard, you see an empty dropdown under the property "Select the Navigation Node To Be Customized".
Workaround :
The issue is due to a programming error in the XML. The basic problem is that the wizard does not support the Navigation
Node name format that the mss file uses (<NavigationNode name="com.sap.pct.erp.mss.Main"....) This is fixed in newer releases, but there is no need to upgrade since the workaround provided here is fine.
Open the XML configuration file named "com.sap.pct.erp.mss.001". The top navigation node should be changed to "Main" instead of the longer name "com.sap.pct.erp.mss.Main". Just replace this string with "Main".This is what I just did and have attached the new com.sap.pct.erp.mss.001 file.
So that the UWL knows what navigation configuration to use, you need to go to the UWL iview properties and change the property 'useNavigationId' to "Main". Otherwise, you will run into problems.
So, in summary, the solution is two parts: changing the navigaiton node from "com.sap.pct.erp.mss.Main" to Main, and setting the "useNavigationId" iview property to Main."
Best regards,
José
Edited by: José Esteves on Apr 23, 2008 10:34 AM

PI 7.1 Configuration Issue - Configuration wizard -StringIndexOutOfBounds

Hi ,
I have installed the PI 7.1 EHP1 and started configuring it . The Configuration wizard step ( NWA-> Scenarios -> Configuration Wizard --> Initial Configuration (dropdown menu) -> NetWeaver Initial Setup ) is failing , I am getting the following error message . Can you please let me know if you have any thoughts on this issue ?
The initial exception that caused the request to fail, was:
java.lang.StringIndexOutOfBoundsException: String index out of range: 10
    at java.lang.String.charAt(String.java:571)
    at java.util.regex.Matcher.appendReplacement(Matcher.java:704)
    at java.util.regex.Matcher.replaceFirst(Matcher.java:848)
    at java.lang.String.replaceFirst(String.java:2001)
    at com.sap.tc.lm.ctc.metamodel.util.StringUtil.decryptPasswords(StringUtil.java:48)
    ... 83 more
See full exception chain for details.
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
For further information about the Web Dynpro error page, error analysis and a description of well-known error situations, see SAP note 1113811.

hi kris
You can connect to different SLD also. just you need to configure
follow the installation guide for PI7.1
https://websmp105.sap-ag.de/instguidesNWPI71
https://websmp105.sap-ag.de/instguidesnw
regards
sandeep

Error while opening UWL configuration file

Hello SDN,
I am customizing UWL config file. I have download file and saved it to desktop. But while opening that file i am getting following error.
The system cannot locate the resource specified. Error processing resource 'uwl_configuration.dtd'. Can you please tell me how to download and customize file.
regards,
Sree.

Hi Sushil,
I have followed the same procedure what you have explained. But when i am opening XML file with XML editor , it is not opening and not giving any error. But when open with word it is saying "file must contain one root element".
When open with notepad below is the content.
<?xml version="1.0" encoding="UTF-8"?>

<!ELEMENT UWLConfiguration (Principals?, DescriptionBundles?, Actions?, ItemTypes?, Views?, GlobalDisplayAttributes?, NavigationNode?)>
<!ATTLIST UWLConfiguration
 version CDATA "1.0"
>




<!ELEMENT Principals (Principal+)>
<!ELEMENT Principal EMPTY>
<!ATTLIST Principal uniqueID CDATA #REQUIRED>

<!ELEMENT ItemTypes (ItemType*)>
<!ELEMENT Views (View*)>

<!ELEMENT ItemType (Caching?, ItemTypeCriteria?, CustomAttributes?, Actions?, Menu?)>
<!ATTLIST ItemType
 name NMTOKEN #REQUIRED
 connector CDATA #REQUIRED
 defaultView NMTOKEN #REQUIRED
 defaultAction NMTOKEN #IMPLIED
 executionMode (optimistic|pessimistic|default) "default"
> following file like this........
when i copy the content directly from portal below is the format....
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
<ItemTypes>
 <ItemType name="uwl.task.webflow.TS01000096.ESS_Webdynpro" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">
 <ItemTypeCriteria systemId="ESS_Webdynpro" externalType="TS01000096" connector="WebFlowConnector"/>
 <Actions>
 <Action name="launchSAPAction" groupAction="" handler="SAPIACLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
 <Properties>
 <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
 <Property name="openInNewWindow" value="yes"/>
 <Property name="display_order_priority" value="5"/>
 <Property name="IAC" value="WS01000060"/>
 </Properties>
 <Descriptions default=""/>
 </Action>
 </Actions>
 </ItemType>
 <ItemType name="uwl.task.webflow.TS01000097.ESS_Webdynpro" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchSAPAction" executionMode="default">
 <ItemTypeCriteria systemId="ESS_Webdynpro" externalType="TS01000097" connector="WebFlowConnector"/>
 <Actions>
Can you please check and let me know if anything is missing.
regards,
Sree.

Configuration wizard not working

Hi All,
I could install the WL Server 7.0.2 on Solaris 8 successfuly using the
typical installation.
But when i try to configure it, create a domain and add Admin and Managed
Servers,
it doesnt create my managed server and keeps looping.
Here is what I get
<------------- BEA Configuration Wizard - WebLogic Platform
7.0.2.0 ------------->
Configure Managed Servers:
|Managed Server Name|Listen Address|Port|SSL Port|
_|___________________|______________|____|________|
Select Option:
1 - Add "Managed Server Name"
2 - Add "Listen Address"
3 - Add "Port"
4 - Add "SSL Port"
5 - Discard Changes
** Managed Server Name = [mserver1] Listen Address = [] Port = [7003]
** SSL Port = []
Enter index number to select OR [Exit][Previous][Next]>Next
<------------- BEA Configuration Wizard - WebLogic Platform
7.0.2.0 ------------->
Configure Managed Servers:
|Managed Server Name|Listen Address|Port|SSL Port|
_|___________________|______________|____|________|
Select Option:
1 - Add "Managed Server Name"
2 - Add "Listen Address"
3 - Add "Port"
4 - Add "SSL Port"
5 - Discard Changes
** The list of managed servers is empty.
It says the List of Managed Servers is empty..How am I to proceed.
It didnt even ask for username and password when I created the admin server.
I have tried this on 3 different machines and get the same error on all of
them.
Help Please!!
Regards
Sapan

I've got exactly the same problem. The workaround we found out was to specify a
listen address for the managed server. Once completed, we removed the listen address
manually from config.xml.
"Sapan Agarwal" <[email protected]> wrote:
>
Hi All,
I could install the WL Server 7.0.2 on Solaris 8 successfuly using the
typical installation.
But when i try to configure it, create a domain and add Admin and Managed
Servers,
it doesnt create my managed server and keeps looping.
Here is what I get
<------------- BEA Configuration Wizard - WebLogic Platform
7.0.2.0 ------------->
Configure Managed Servers:
|Managed Server Name|Listen Address|Port|SSL Port|
_|___________________|______________|____|________|
Select Option:
1 - Add "Managed Server Name"
2 - Add "Listen Address"
3 - Add "Port"
4 - Add "SSL Port"
5 - Discard Changes
** Managed Server Name = [mserver1] Listen Address = [] Port = [7003]
** SSL Port = []
Enter index number to select OR [Exit][Previous][Next]>Next
<------------- BEA Configuration Wizard - WebLogic Platform
7.0.2.0 ------------->
Configure Managed Servers:
|Managed Server Name|Listen Address|Port|SSL Port|
_|___________________|______________|____|________|
Select Option:
1 - Add "Managed Server Name"
2 - Add "Listen Address"
3 - Add "Port"
4 - Add "SSL Port"
5 - Discard Changes
** The list of managed servers is empty.
It says the List of Managed Servers is empty..How am I to proceed.
It didnt even ask for username and password when I created the admin
server.
I have tried this on 3 different machines and get the same error on all
of
them.
Help Please!!
Regards
Sapan

UWL Configurations assistant only works sometimes

Hello Everyone,
I am having problems with the UWL configurations assistant.
The uwl version is 7.00 SP21(1000.7.00.21.0.2009.12.14204516)
The Problem is as follows:
When using the assitant to change attribute names (ie. Change subject to Theme ) I can change it but after saving the change and checking the UWL the change is not there (ie subject is still subject). This happens not only with attributes but also when I want to change the view name. Some of the changes that I have made work but then some of them don't. I've cleared cache and all and even restarted the portal but not all changes are always made. I have no definitive explanation why some changes are made and some are not. Removing views from the UWL always works properly with the assistant so at least that works
I have already been though the complete SAP Help, Xsearch and the UWL Forum so links to SAP Help Won't help much.
Thanks in advance for any help
Paul

Hi Beth,
Yes I am using the Wizard.
1. select the wizard link and in the next window select "Configure the main view of the UWL" (Please note I am translating everything because our portal is in German. So not all names will be exact)
2. In the Navigation node configuration window, Select Tasks -> New and in progress -> Customize the view button
3. I then select, for example, the "Substitute for" attribute and select "rename" in the "enter a name to be used in this view" area I enter "To" for this attribute and click on "accept".
4. I see that the change in the attribute name has been made in this window
5. I the click on the "save" button in the upper left corner.
6. This brings me back to the Navigation node configuration window. In this window I select the "save and return" button
7. The status page tells me in which .xml file my changes were saved (in this case MainCombinedTracking)
8. I then select the "back to main page button" and am brought back to the UWL configuration main page
9. I then go to the UWL page and check to see if the change has been made and I still see "Substitute for"
I did get this to work in one view (Tasks) but that took quite awhile and a few tries. I haven't been able to get it to work again in the other views (Completed Tasks and Tracking) or in other systems (Kon or Prod). I had cleared the cache everytime after checking and seeing that the attribute name had not changed. All of the customizing (personal) was deleted during this whole scenario so that it would not be in the way.
I have tried to use the wizard to rename the Tracking tab but this also did not work even though I selected the "Rename" button in the Personalize Tracking window
No errors are shown. I just see that the attribute name has not been changed unfortunately. I have not set uwl to debug mode but I will try that when I get a chance to.
Thanks for your speedy reply
Paul

UWL: hide task type dropdown

Hi
In the header of each view in UWL, there is a dropdown to select the new tasks, tasks in process,...
Is it possible to hide this dropdown?
Thanks,
Wim

Hi Wim,
its all configuration of the UWL XML files.
Search for NavigationNode name="root" Under the subnote "Main" you have the node
NavigationNode name="CombinedTask" . Remove what is below and add what is left in a new XML.
Dropdowns are gone for the "Tasks" tab....
Regards,
Kai

PI 7.11 problem with configuration wizard

hello guys,
during the configuration wizard to use PI functionalty of my PI system I receive a massage regarding the not correct registration of my system into SLD
ABAP technical system 'SID on HOSTNAME\SID' not found . But it's correctly in the abap technical systems.
What could be wrong? Is it related to the fact I performed a NAMED INSTANCE installation with MSSQL ?
anyone of us had the same problem?

Hello Bruno,
Please follow the MANUAL wizard from the link below:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/a0/40084136b5f423e10000000a155106/frameset.htm
Perhaps the automatic wizard could lead to a lot of problems.
It should solve the issue with the wizard.
Regards,
Caio Cagnani

Re-Installing SharePoint Foundation 2010 - Product Configuration Wizard Error

So i recently had to start fresh on my SharePoint development server. My database was left remaining on a different server during this process.
So after re-installing SharePoint 2010, I told it to connect to an existing server farm, and then put my database server name in, from which it was able to retrieve the database name. After this step though i ran into my problems... For some reason it is
saying i don't have the appropriate software installed to finish the Configuration Wizard, when i know i have it.
What can I do to fix this problem?

Hi Zipatones,
Honestly, it is difficult to diagnose the cause of your issue since there could be several reasons. The best I can do is give you several options one of which might be the solution.
1) During the configuration I would let SharePoint setup a new Config database. Then setup a new web application with the same URL as your original one. Instead of creating a site collection, detach that database and attach your original database.
2) Do the same for the service applications. Setup new service applications and then detach and attach the original databases. I highly recommend you use powershell for service apps since you need to find the guids of both the application and its proxy.
3) You need to make sure that the new SharePoint app server has the same version of updates (such as hotfixes) installed on your previous farm.
Hope these recommendations help.
Daniel Christian (MCTS)

Error while configuring the database connection in sharepoint configuration wizard.Sharepoint 2007.

System
Provider
[ Name]
SharePoint
Products and Technologies Configuration
Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-11-06T02:03:00.000Z
EventRecordID
11054
Channel
Application
Computer
HZNTPMSWSMOS001.NEO-DIAGEO.com
Security
EventData
Failed
to create the configuration database. An exception of type
System.SystemException was thrown. Additional exception information: The trust
relationship between this workstation and the primary domain failed.
System.SystemException: The trust relationship between this workstation and the
primary domain failed. at
System.Security.Principal.NTAccount.TranslateToSids(IdentityReferenceCollection
sourceAccounts, Boolean& someFailed) at
System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
sourceAccounts, Type targetType, Boolean forceSuccess) at
System.Security.Principal.NTAccount.Translate(Type targetType) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GetMachineRelativeSecurityIdentifier(SPServer
server, Boolean& isMachineAccount) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityAccessToDatabase(SPProcessIdentity
identity, SPDatabase database) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityDatabaseAccess()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update() at
Microsoft.SharePoint.Administration.SPWindowsService.Update() at
Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder
administrationContentDatabase, IdentityType identityType, String farmUser,
SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
IdentityType identityType, String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at
Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()

Hi,
This issue seems to be a machine Issue. From message is seems that your Computer is not properly connected to Domain. use the steps in the below link and try doing your steps again.
https://support.microsoft.com/kb/162797?wa=wsignin1.0
Regards

OutOfMemoryError when running Oracle BPM Enterprise's Configuration Wizard

Hi,
I was trying to configure Oracle BPM Enterprise via Oracle BPM Admin Center. I left most of the settings to their respective default values; only adding in passwords for the Directory, Engine, etc. However an error was encountered when it is trying to deploy the '01-eng-bpmengine' EAR file. A 'OutOfMemoryError: Java heap space' was logged after running the configuration for a while. Below is the full error log:
AdmCenterConsole.log
FuegoLauncher.main()
fix classpath: C:\OraBPMwlHome\bin;C:\OraBPMwlHome\bin\lax.jar;
new classpath: C:\OraBPMwlHome\bin\lax.jar;FuegoLauncher.main() - 2
arg[0] = C:\OraBPMwlHome\bin\obpmadmcenter.properties
StreamLogOutput: No log file specified in property 'fuego.log.admcenter.file'.
Defaulting to System.err.
[ 03/03/09 20:54:12]
[ 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
[ 03/03/09 20:54:12]
[ 03/03/09 20:54:12] PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\Java\JDK16~1.0_1\jre\bin;C:\Java\JDK16~1.0_1\bin;C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Java\jdk1.6.0_10\bin;C:\apache-ant-1.6.5\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8
[ 03/03/09 20:54:12]
[ 03/03/09 20:54:12] Your environment has been set.
[ 03/03/09 20:54:12]
[ 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar
[ 03/03/09 20:54:13]
[ 03/03/09 20:54:13] Initializing WebLogic Scripting Tool (WLST) ...
[ 03/03/09 20:54:13]
[ 03/03/09 20:54:19] Welcome to WebLogic Server Administration Scripting Shell
[ 03/03/09 20:54:19]
[ 03/03/09 20:54:19] Type help() for help on available commands
[ 03/03/09 20:54:19]
[ 03/03/09 20:54:19] t3://SN-06-SHENGYUEN:7001
[ 03/03/09 20:54:20] Connecting to t3://SN-06-SHENGYUEN:7001 with userid weblogic ...
[ 03/03/09 20:54:22] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'oft'.
[ 03/03/09 20:54:22]
[ 03/03/09 20:54:22] Warning: An insecure protocol was used to connect to the
[ 03/03/09 20:54:22] server. To ensure on-the-wire security, the SSL port or
[ 03/03/09 20:54:22] Admin port should be used instead.
[ 03/03/09 20:54:22]
[ 03/03/09 20:54:22] Location changed to edit tree. This is a writable tree with
[ 03/03/09 20:54:22] DomainMBean as the root. To make changes you will need to start
[ 03/03/09 20:54:22] an edit session via startEdit().
[ 03/03/09 20:54:22]
[ 03/03/09 20:54:22] For more help, use help(edit)
[ 03/03/09 20:54:22]
[ 03/03/09 20:54:22] Starting an edit session ...
[ 03/03/09 20:54:22] Started edit session, please be sure to save and activate your
[ 03/03/09 20:54:22] changes once you are done.
[ 03/03/09 20:54:22] creating mbean of type JMSServer ...
[ 03/03/09 20:54:22] creating mbean of type JMSSystemResource ...
[ 03/03/09 20:54:22] creating mbean of type SubDeployment ...
[ 03/03/09 20:54:22] creating mbean of type Queue ...
[ 03/03/09 20:54:22] creating mbean of type Topic ...
[ 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[ 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[ 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] creating mbean of type Property ...
[ 03/03/09 20:54:22] setting attributes for mbean type JMSServer
[ 03/03/09 20:54:22] setting attributes for mbean type JMSSystemResource
[ 03/03/09 20:54:22] setting attributes for mbean type SubDeployment
[ 03/03/09 20:54:22] setting attributes for mbean type Queue
[ 03/03/09 20:54:22] setting attributes for mbean type Topic
[ 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[ 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCXAParams
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[ 03/03/09 20:54:22] Saving all your changes ...
[ 03/03/09 20:54:22] Saved all your changes successfully.
[ 03/03/09 20:54:22] Your edit session is not stopped, you can continue your edits.
[ 03/03/09 20:54:22] Activating all your changes, this may take a while ...
[ 03/03/09 20:54:22] The edit lock associated with this edit session is released
[ 03/03/09 20:54:22] once the activation is completed.
[ 03/03/09 20:54:23] Activation completed
[ 03/03/09 20:54:23] Creating a user ...
[ 03/03/09 20:54:23]
[ 03/03/09 20:54:23] User already exist
[ 03/03/09 20:54:23] Deploying application from C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets AdminServer (upload=true) ...
[ 03/03/09 20:54:23] <Mar 3, 2009 8:54:23 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear], to AdminServer .>
[ 03/03/09 20:54:27] .Completed the deployment of Application with status completed
[ 03/03/09 20:54:27] Current Status of your Deployment:
[ 03/03/09 20:54:27] Deployment command type: deploy
[ 03/03/09 20:54:27] Deployment State : completed
[ 03/03/09 20:54:27] Deployment Message : no message
[ 03/03/09 20:54:27] Deploying application from C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear to targets AdminServer (upload=true) ...
[ 03/03/09 20:54:27] <Mar 3, 2009 8:54:27 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear], to AdminServer .>
[ 03/03/09 20:54:43] Failed to deploy the application with status failed
[ 03/03/09 20:54:43] Current Status of your Deployment:
[ 03/03/09 20:54:43] Deployment command type: deploy
[ 03/03/09 20:54:43] Deployment State : failed
[ 03/03/09 20:54:43] Deployment Message : java.lang.OutOfMemoryError: Java heap space
[ 03/03/09 20:54:43] weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
[ 03/03/09 20:54:43] at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
[ 03/03/09 20:54:43] at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
[ 03/03/09 20:54:43] at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)
[ 03/03/09 20:54:43] at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)
[ 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ 03/03/09 20:54:43] No stack trace available.
[ 03/03/09 20:54:43] This Exception occurred at Tue Mar 03 20:54:43 SGT 2009.
[ 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[ 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[ 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[ 03/03/09 20:54:43] at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
[ 03/03/09 20:54:43] at org.python.core.PyMethod.__call__(PyMethod.java:96)
[ 03/03/09 20:54:43] at org.python.core.PyObject.__call__(PyObject.java:248)
[ 03/03/09 20:54:43] at org.python.core.PyObject.invoke(PyObject.java:2016)
[ 03/03/09 20:54:43] at org.python.pycode._pyx17.deploy$8(<iostream>:223)
[ 03/03/09 20:54:43] at org.python.pycode._pyx17.call_function(<iostream>)
[ 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[ 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:404)
[ 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:184)
[ 03/03/09 20:54:43] at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:623)
[ 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[ 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[ 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:256)
[ 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:169)
[ 03/03/09 20:54:43] at org.python.pycode._pyx16.f$0(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:738)
[ 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[ 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[ 03/03/09 20:54:43] at org.python.core.PyCode.call(PyCode.java:14)
[ 03/03/09 20:54:43] at org.python.core.Py.runCode(Py.java:1135)
[ 03/03/09 20:54:43] at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
[ 03/03/09 20:54:43]
[ 03/03/09 20:54:43] Exiting WebLogic Scripting Tool.
[ 03/03/09 20:54:43]
[ 03/03/09 20:54:43]
[ 03/03/09 20:54:43] at weblogic.management.scripting.WLST.main(WLST.java:129)
[ 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[ 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[ 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[ 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[ 03/03/09 20:54:43] at weblogic.WLST.main(WLST.java:29)
[ 03/03/09 20:54:43] <Mar 3, 2009 8:54:43 PM SGT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
Is there any way that I can increase the heap size of the Configuration Wizard? If not, is there any solution to this problem?

Hi,
It seems to be a Weblogic OOM (OutOfMemory).
Why don't you try increasing the weblogic memory (you have to modify your domain scripts)
I guess that after increasing your WLS domain memory settings you will be able to configure it using the config wizard.
Hope this helps,
Ariel

UWL Configuration Wizard - Empty Dropdown

Similar Messages

Maybe you are looking for