UWL donu00B4t show the sender's name

Hello Masters:
I´m sending workflow tasks to the UWL. The tasks are showing ok in the portal, but these don't show the sender's name in the "From" column. This column appears empty.
I have two ECC systems configured to send tasks to the UWL, but only one of them have this problem. The tasks from the second system show the user's name who sent the task.
Does anybody know what could be happen?
Thank you.

Hi,
Populate the name of the person who triggered in WF_INITIATOR and bind it to Task element.
Workflow --> Task
&_WF_INITIATOR& --> &_WF_INITIATOR&
Hope this solves the issue.
Regards
Narin

Similar Messages

TS3276 On received mail, I delete sender's name, address, etc. then forward it. The forwarded mail has a duplicate of the original mail, show original sender's name, etc. How to prevent the duplicate from being sent?

How to prevent duplicate of orginal mail (with original sender's name, address) being "attached" when forwarded?

Maybe I am mis-understanding what you are seeing.
When I forward a message, the receiver will see the original mail (unless I edit it, such as removing any previous sender's information) and the length will be the same as the message was before forwarding except for the added line "Begin forwarded message" (again, unless I edit bits out), and there will be no attached copy of the original message.
So when you say in your reply above "The orginal email with the sender's name and address was also sent with my forwarded email." do you mean:
a) that it is still visible at the head of the text of the message (which I was saying does not happen for me because "after hitting delete, the previous sender's information disappears." [and since] "it has disappeared, it cannot be in your forwarded mail." Disappeared means it is not there.
b) another copy of the original message is attached to the forwarded email at the end, either as an included file or as repeated text.
c) some other situation.
Sorry about the previous mis-spellings! I hope that we can get to the bottom of this.

I have a MacBook Pro. In incoming emails strange symbols are replacing the sender's name that is usually in bold. Can anyone help?

Incoming emails are showing strange symbols where the sender's name used to be in bold. The messages themselves are ok, it's just the sender's name. Can anyone help me figure this out?

Back up all data.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them, then boot in safe mode to rebuild the font caches. Boot again as usual and test.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

How to hide or do not show the receipt's name after miss called?

1. How to hide or do not show the receipt's name after miss called?
2. I do not want to show my message statement in the screen.

I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
The strange thing is that the Embedded Web Server says:
"This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
Please help with solving this issues?

How to show the witholding tax name instead of the code in PLD

Hi Guys,
Is it possible to show the witholding tax name instead of the witholding tax code in the summary or end of report in the PLD(AR Invoice)?
Thanks.
Eric

Hi Eric
I have tried to get it directly from the table: Witholding Tax, field: WTaxName; but there's no way to relate that with the A/R Invoice document so it shows me a wrong WT Name.
As this tables is not directly exposed/related to the document the best way is try to create a Formatted Search in order to get the description you want. Please note the WT is get from a table and if you have more than 1 type of WT it may not work in a End of Report as it does not have the capacity as repetitive area to read multiple lines.
Paulo Calado
SAP Business One Forums Team

How to change the sender's name/email-id in the scheduled report

Hi,
We have SCOM 2007 R2. In the Reporting tab (SCOM Console), we have some scheduled reports. I need to change the sender's name/email-id in a scheduled report. When we receive the report through email, receiving with the person's name who moved out of the
team.
I tried to change but could not find the option to change while editing the properties in SCOM Console under Reporting -> Scheduled Reports.
When we are receiving mail from that scheduled report, instead of an individual name, would like to provide a generic name. Please help me out. Let me know, if you need more information.
Thanks,
Naren.
Thanks & regards, Naren.

Hello,
the SCOM scheduled reports feature rely on SQL Reporting Services. So, if you would like to change the SMTP configuration, you should go in SQL Reporting Services Configuration Manager:
Open in the Start Menu, Reporting Services Configuration Manager.
In the connection window, click OK.
Click on the tab E-mail settings.
Change the Sender Address.
Click Apply.
Alternatively, you could also change in the Scheduled report properties the field
Reply to. I think it should customize the reply address for each scheduled reports, but I have never used it. Anyway, doing it with Reporting Services Configuration Manager is more interesting in the long-run.

Changing the Sender's Name of an Email Address

Hello Experts
I am sending Emails from an Activity in the Interaction Center WinClient and is working good. The thing is that i don't want to display the name of the person that is sending the e-mail once the e-mail is sent.
For security reasons, i want to change the sender's name for a text.
For instance, if Jose Perez is sending the e-mail, i want change that for Solution Center. That way, when the customer receive the e-mail, he will see Solution Center and the e-mail address ('[email protected]) of the sender.
Can anyone help me solve this issue?
Points rewarded
Thanks

Hello Alberto,
In the function module SO_OBJECT_SEND, which is used to send e-mails, you can pass the parameter ORIGINATOR and ORIGINATOR_TYPE.
ORIGINATOR = the email address that will appear as 'From'
ORIGINATOR_TYPE = 'U' for internet e-mailadresses.
Hope this helps,
Kind regards,
Joost

Accessing the sender file name in the response email

Hi,
I have an asynchronous proxy scenario wherein I am calling an outbound proxy within an inbound proxy.
Basically a file is sent from an external partner and response is sent back to them if there are any errors. Also email notification will be sent and that email should include the sender file name so that they can know which file is erroneous and can resend that file after making changes. Any help will be appreciated.
Many Thanks.

Hi,
Have a look just two threads below yours !!
File recr Adapter : How to set target directory based on sender interface ?
See "Adapter-Specific Message Attributes" for a Sender File Adapter
http://help.sap.com/saphelp_nw70/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
I suppose your flow is:
1. File -> PI -> proxy_req     (request)
2. proxy_resp -> PI -> Mail   (response)
Thanks to "Adapter-Specific Message Attributes" ofr a Sender File Adapter, you will be able to store filename in DynamicConfiguration and then you will able to use a UdF to catch the source file and provide it somewhere in your proxy_req.
After for the returned flow "2. proxy_resp -> PI -> Mail   (response)", your proxy_resp has to returned to PI the filename providen with the 1st step.
And then, In PI you will be able to send by email the source filename.
Regards.
Mickael

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

My inbox used to show the sender for each message and now it does not...how do I get it back to where it was?

Right click the heading at the top of the message list and select From from the list of options.

Urgent, SOS for help: How to show the pdf file name at the right bottow of the page?

I want to show the pdf file name at the right bottow of the page for filing purpose, anybody knows anything?
I know it can be showed at the left bottom through adobe printer, but i need it to be at the right bottom.
thanks.

The result is a UIWebView that displays a blank page. No errors occur in the UIWebView delegate method. The thing is that data has the correct length, in bytes, for the PDF I am trying to display, and I also get the pdf file in Library/Application Support/iPhone Simulator/4.3.2/Applications/ Does anyone have an idea as to what might be going wrong here or how I can better debug this problem?

IPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars

Hi my iPhone 4S has no signal bars but shows the network carriers name and the 3G icon but just doesn't have no siganl bars but it was working fine till today then all of a sudden lost signal what do i do any help much appreciated

I've been experiencing with the same problem lately. Have you tried getting a new sim card?
With the new sim it seems to work well for a few days and then it goes back to the same problem. The warranty on my phone just ended about a month ago, and I've never dropped it and no water damage either. When I do a erase all and reset, it seems to work for a few days again and comes back to the same issue. I've deleted all my apps and been using the phone just as a phone and txting device. New IOS update doesn't seem to change this issue either. I've been getting by with doing a network reset and turning it off and on a few times a day.
Anyone have any solution? Much appreciated!

My email will only show the sender and subject lines, but no content. What can I do?m

My email will only show the sender and subject lines and does not show the content of received emails on my ipad. How can I fix this?

I am having the same problem. As recently as this morning, I could read entire hotmail emails on my iPhone 4 now, I can see only the sender & subject. What us up? Any solutions? Thank you.

I can't change the sender/receiver name on my email

This seems like a simple problem, but I can't solve it. On my email, I send a message and it shows my wife's name as sender on the recipient's received email. I thought it was caused by my wife's entry in the Address Book showing our email address, so I deleted her entry from the Address Book, but it didn't remove the problem. I see no other connection of my wife to my email account so I cannot figure out how to have my name show as sender on my emails. Any suggestions?

Have you had any luck with this as I have the same issue

UWL list showing the workitems wrongly.

Hi ,
In the UWL list the sometimes the workitem is displayed with wrong information.
If I have 4 work items which are expected to be displayed in the UWL list, Instead the UWL shows three work items.
The work item combines the decription of the other work item and shows the wrong information.
E.g. I have three columns in the UWL list Item description ( this is the description of work item), name and status.
The work item
       Item Description                Name                         Status
1.   Test results of 1                ABCD                        Ready for acceptance
2.   Test result of 2                 MNGK                       Approved
The UWL instead of above results, shows the one record like below
1.    Test results of 1              MNGK                Ready for acceptance.
Has anyone faced this problem before? any pointers for this?
Thanks in adance.

Did you try to activate [Enabling Delta Pull Mechanism|http://help.sap.com/erp2005_ehp_04/helpdata/DE/eb/101fa0a53244deb955f6f91929e400/frameset.htm]

TS3672 Messages don't show the contact person name. Instead the number appears. How to get over the problem

All of a sudden, messages that I send and recieve from contact persons show the number instead of the name/ It happens to some of the contacts and when I open the list of messages to the person, the name show correctly above the list of the messages.
How do I overcome this?
Dov

Nah, it happens to all of us, at one time or another.
Glad to help!

UWL donu00B4t show the sender's name

Similar Messages

Maybe you are looking for