UWL - FROM field

Hello UWL experts,
Where is the FROM column in the UWL mapped from the backend Workflow item?
Thanks,
zryxel

I think its the below one:
<Attribute name="ZFROM" type="string" displayName="From"/>
For ex:
<ItemType name="uwl.completedtask.webflow.<enter your TS ID here>" connector="WebFlowConnector" defaultView="WorkItemsCompletedView" defaultAction="viewDetail" executionMode="pessimistic">
     <CustomAttributes>
          <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId"                     objectType="WEBFLOW_CONTAINER" cacheValidity="final">
               <Attribute name="ZAMOUNT" type="string" displayName="Amount"/>
               <Attribute name="ZFROM" type="string" displayName="From"/>
               <Attribute name="ZREFERENCE" type="string" displayName="Reference"/>
               </CustomAttributeSource>
          </CustomAttributes>
</ItemType>

Similar Messages

HT5624 Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ????

Why in my email ( the one on my ipod5 that I use with my apple ID) when I get emails about my use of my apple ID to use a service in the from field it has my fathers name and when I click on it it shows his contact info ???? I also set up my apple ID with a new email account and also I signed up for iCloud but used the same apple I'd email and password but it gave me a I cloud email! I did activate the favorites in my email . Noticed the from field has my fathers name and contact and it is a notification about me using my apple ID to sign in to FaceTime! Something is messed up, not sure how or why???

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

How can I change the "From:" field in iOS Mail?

This is a weird one.
I have a gmail work email account that has been set up for me. There's a primary email address assigned to it, and a secondary one (which is the one I want to use).
No problem at all sending from the secondary account on my MacBook Pro. I just hit the drop down menu by the "From:" field, and I can select it from there.
However, when I send from my iPhone, I'm only given the option of sending from my primary email address, not the secondary one. This is despite the fact that I've synced Mail accounts via iTunes.
Any idea how I might fix this so I can send from the secondary account on my iPhone?

First of all, please fill in the Computer Model and Operating System fields on your My Settings’s profile (and click Save). This is essential information that should always be provided when asking for help.
Now, what does “I can't change it” mean? What appears in the From header of the messages you send is determined by your Mail > Preferences > Accounts > Account Information settings...

How to use alias in "From" field when I send a mail with utl_smtp ?

Hi all,
I'm using a PL/SQL package with an Oracle 11G database to send mails. It works fine but instead of use of my mail in "From" field like "[email protected]" as sender E-mail address, I would like to have "Toto" in the sender address. I tryied to use utl_smtp.mail(l_connection, '<toto> [email protected]') but it doesn't work. The only way I can send mail is when I set utl_smtp.mail(l_connection, '<[email protected]>') directly. When I use the Alias, I have an error from smtp server telling that I use a bad syntax address.
Does someone know how to use the alias ? Where do I do a mistake ?
Thank you for your help.
sis2b

Thank you, I find how to solve the problem thanks to your link.
I try to send HTML E-mail so I had the From in the from field writen in the header of the mail and not to initialize the connection.
sis2b.

Apple Mail "From:" Field Customization

I have several IMAP accounts in Apple Mail. One of them is a Gmail account that I use as a conduit account for work, so when I reply to messages or compose new mail, I would like it to display a specific address in the "From:" field, instead of selecting it every time (I added my work account to Mail as well, though I forward messages to my Gmail account). So, for example, my Gmail account is "[email protected]" and my work email is "[email protected]".
When I compose messages from the Gmail account I would like the "From:" field to display "[email protected]" instead of "[email protected]". I am able to set up Gmail web interface to do this, but have not been able to set up Apple Mail to do the same (aside from instructing it to send messages using my work server, instead of the Gmail server).
In Lion, Mail was able to specify that address if I was replying to a messages sent to "[email protected]" but would show "[email protected]" for every new message. In ML, even replying to a message sent to "[email protected]" shows "[email protected]" in the "From:" field.
Does anyone know how to instruct Mail to choose only "[email protected]" when replying or composing new messages?
Thanks for your help!

What you are describing is what is known as "articulation work". To quote Suchman, "'Articulation work' names the continuous efforts required in order to bring together discontinuous elements - of organizations, of professional practices, of technologies - into working configurations". That makes it sound better than it is.
Ideally, your non-profit needs a decent webhost like Dreamhost that can transparently integrate with Google Mail and make the whole problem go away.
asmystiq wrote:
I configured Mail to use the work SMTP server to send messages from the Gmail account.
This is what is known as e-mail spoofing.
In the web Gmail interface, everything works smoothly.
Yes. Google is known for ignoring laws and facilitating any kind of network traffic, legitimate or not, in order to track activity and build value for its advertising business.
In Mail, even if the message was sent to [email protected], Mail replies show up with [email protected] in the "From:" field
Yes. That is the way it is supposed to work.
I also set up a rule for redirecting Sent messages to Gmail and moving the original copies to Trash on the work account. In Lion, all was well and the replies indicated [email protected] in the "From:" field and when I manually applied the rule to the Sent messages, they were sent to the Gmail account.
That's the "articulation work" in action.
I've looked at some of the discussion you linked (thank you for that) and found it enlighening, though I am not done reading all of it yet.
There are a number of different issues going on. Modern e-mail is extraordinarily complicated.
What I do now is not forward work email and keep the daily workflow focused on the Inbox of the [email protected] account, which handles replies appropriately. I then set up a rule to redirect any mail from the work account that is over a day old to the Gmail account. I then organize it on the web interface (which is not optimal, but cuts down my time spent on the web interface from "always" to once daily or so).
You could probably improve that by creating folders in GMail from within Apple Mail. Once you move an old message from the work server to GMail where you have more room, you can have additional rules to move it around within GMail.
The only real, definitive solution is to have more room for e-mail. You should contact your system administrator and suggest switching to GMail or Microsoft's version. Everyone hates dealing with e-mail. That is why these transparent e-mail services are so popular. Once it gets setup, all the magic happens in the name servers and all anyone ever sees is "work.org". Plus, you will likely gain some additional functionality that Microsoft Exchange supports that older systems do not.
In the interim, the best solution is to show the "Reply-to:" field and put your "[email protected]" address in there. Replies will be directed to that address but you will still have to move everything around after receipt. You should be able to configure your "work.org" e-mail system to automatically forward all you rmail to the GMail account. Combined with "Reply-to:", that is about as good as it is going to get.
If you need more clarification, let me know. Though I think that ML is behaving in a way that is not convenient and I don't see a way to create a hack to fix it. It seems like it would be an easy feature to add, but who knows what Apple folks are thinking...
What you have described is e-mail spoofing and Apple doesn't support that. No legitimate internet e-mail provider should support it. If Google does, then that is Google's problem. Most other e-mail servers would not allow that and that is why Apple doesn't support it. And, in general, Apple software is simply not very amenable to "hacks".
I have though about writing an Apple Mail plugin to automatically add a "Reply-to:" to certain e-mail messages. It will be a few months before I get time for that, so don't hold your breath.

HT1277 how can i remove the email add from a deleted mailbox from the prompts of the 'from' field?

how can i remove the email add from a deleted mailbox from the prompts of the 'from' field?

Thanks a lot, roam! That worked

The incorrect iCloud email (in the from field)address is appearing

The incorrect iCloud email (in the from field) address is appearing on my iPod touch, but not on my MacBook Pro. The I Pod's ICloud email account is using my account for Itunes etc., not the icloud email address, how can I reset the "from" address?

ok thanks, so if I do nothing straight away, they won't free the address up and give it to someone else, correct?

Can I have Mail format the "From" field based on my Address book entries?

I have most of my contacts in my address book, but Mail still displays the "From" field in the message list pane with the normal email address header.
Here's an example:
User A emails me a message from this address:
"User A" <[email protected]>
In my Address Book, I have User A's info as this:
First Name: Bob
Last Name: Marley
Email Address: [email protected]
In Mail, though, the "From" field in the message list view still says ...
User A
... when I want it to say ...
Bob Marley
Does that make sense? How can I do this?

All you need is a plug adaptor, if required. Apple sells an adapter kit:
http://store.apple.com/us/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

From field in shared mailbox displays LegacyexchangeDN instead of person's email address.

We have a situation where a group of users who utilize a shared mailbox are getting a weird issue from time to time. They will take mail from their own mailbox and drag it to the shared mailbox. Sometimes the email show up fine, other times the
from field shows the GUID of the person's mailbox rather than their email address after they move it. See attached pictures. Any idea what would cause this and how I would fix it? It appears this way in everyone's Outlook and OWA.

Hi,
DisplayName is an Active Directory property which represents the display name of a recipient in an appropriate format to display to the end-user. This is a Unicode property which may contain non-ASCII characters so that a user name may contain DBCS characters.
In your case, you need to create a registry entry on Outlook side.
For more information, here is a helpful thread for your reference. (Note: Though it is Exchange 2010, it also replies to Exchange 2013 about this issue.)
Outlook 2013 and Exchange 2010
https://social.technet.microsoft.com/Forums/exchange/en-US/16e80e30-411c-4325-a7a7-1eb51a78700d/outlook-2013-and-exchange-2010?forum=exchangesvrclientslegacy
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Shared mailbox from field (exchange 2007)

Hi there,
I am not sure if this is the right forum to ask this question, but couldn't think of anywhere else.
My team at work has a normal exchange account and a shared mailbox they have access to. If you log on to outlook, you see 2 information stores - one for your personal mailbox and one for the shared mailbox.
If I reply from my personal mailbox, the from field gets correctly populated with my name, but when I reply to an email from the shared mailbox the from field gets populated with the shared mailbox email address, which we don't have permission to use, so
emails bounce if we do not manually change the from field.
We developed a vba solution to automatically do this for us but I was wondering if this can be somehow switched on the exchange side of things/
Does anyone know if there is?
Thanks,
B.

Hi
You can not control this behaviour from Exchange. This is controlled by Outlook.
Outlook chooses the from address from what additional mailbox you are replying from (just as you see :-))
There are a lot of registry tweaks for Outlook, but I don't think there are one to control this.
I see 3 possible sollutions.
1. The users can choose them self
2. You give the users "Send As" permissions on the mailbox
3. you use this tool
http://www.ivasoft.biz/setfrom2013.shtml
BR
Steen

Why is the "From:" field being changed in Mac Mail. I have multiple gmail accounts setup and it seems to change the "FROM" field even though I've selected which account to use to send the email.

So
I've got multiple gmail accounts setup in Mac Mail.
Somtimes when I send or forward emails, it uses the wrong FROM field even though I'm declaring
specifically which account to use.
This becomes apparent when the person replies to my message and it goes to the wrong account

Check you accounts in Mail and make sure each account has the correct outgoing server address. Check the box to use only that server.
Second, go to the gmail website and in settings under the account tab, make sure you have the correct settings for replying to messages.

How to get my Name in the From Field instead of email address?

For an Exchange Activesync account, how do you get your friendly "Name" to show in the From: field rather than email address ([email protected])?
I seem to be able to do this fro IMAP/POP accounts but not Exchange Activesync.
All the discussions I've found about gmail and Activesync seem to be centered on getting your messages to show a different return email address than your exchange account. I'm not looking for this, just to show the Name.
Thanks

If you add a contact ("Contacts app>> "+">> enter info) with that email address, it will appear in mail with whatever name you set in the email address' contact.

Setting From Field/Gmail?

I have two email addresses:
1. one from a university I attended (this is a virtual address)
2. one from the telephone company (this is a real address)
Mail can be sent to my university address and is forwarded to my real address.
The problem I'm having is that the telephone company rejects mail with a different From field when I send mail through it; I can't set the From field to my university address. (I was able to set the From field when we used a cable connection; we switched to the telephone company because it saved about $12-$15/month. As long as people use my university address, everything is OK. With cable, my cable address was never seen. With the telephone company, I can't hide my telephone company address.)
Can sending mail through gmail accomplish what I'm trying to do?
Any other thoughts?
Thanks.

I have a .edu address. There is no storage associated with the .edu address, which is why I call it virtual. All mail sent to the .edu address is forwarded to someplace else. I can login to the .edu server to control the forward.
I need to do this when I switch email providers, which, in my case, happened to be .net. When I switched from a cable to a telephone provider, my physical email address changed. I did not need to inform anyone sending email to me unless they happened to be using my .net address.
In the cable world, the provider accepted .edu From fields. So everything was OK. The telephone provider does not, however, accept different From fields, so the From field is my physical .net address. I've tried "Reply To", but it's effectiveness is sporadic.
Any thoughts?
Thanks.

From field in red font

I use mail to read mails from 3 different mail addresses and, since a few day, i realized that the "FROM" field (where you choose from wich account send mail) now is in a RED font. Strange, i'm sure it has been black since always and i cannot understand the reason of the change.
Who canhelp me?
thanks
marco

Got to Mail > Preferences > Composing.
Is there a tick in the box labelled 'Mark addresses not ending with'?
If so, that's probably the reason.

Wiki Server: how to change who "From" field in Mail

I have Mail set up to receive an RSS feed from our Wiki Server and in the "From" field it comes up as "Workgroup: Search Results."
Is there any way to change this, say to "Workgroup Intranet"?

>
Sukhi Singh wrote:
> Hi
> I want to change a Parameter field in Crystal report from YYYY-MM-DD format to DD/MM/YY format
What do you mean by Crystal Report? Are you sure you posted this to the correct forum?

UWL - FROM field

Similar Messages

Maybe you are looking for