UWL is appearing in POWL instead of Shopping car iVew

Hi All,
UWL  Screen is appearing in POWL (Personal Object Work list) instead of Shopping cart in Portal. The source sytsem for the shopping cart is  SRM system(backend system).
if any body is having the idea on this ,you  can pls comeup with your views.
Raji

hi raji,
can you more specific about these solutions,i.e how an hover menu in Top level navigation effected the UWL and Navigation in URl? is there any implementation error or its only with Hover menu, its more useful if you provide some info regarding this issue
your navigation to url thread Removing the Navigation target from the browser URL
regards
Mahesh

Similar Messages

  • Purchase Order Quantity appear as 1 instead of 0.222 in PO print preview

    Hello MM Enthusiasts,
    I have a PO with acct assgt – P (Network) where Purchase order quantity updated as 0.222 but if I click on PO print preview the quantity appear as 1 instead of 0.222.
    Please let me know what has gone wrong in my case.
    PS: When I look at my Output type by click on message in ME23N the traffic light was green and no issues observed here.
    Cheers,
    Kumar S

    Hello ALL,
    Thanks for the response.
    This is a REAL issue.
    The purchase order has been created manually by user  with reference to purchase requisition.
    When I look at Purchase requisition in transaction ME53N it has been created for 0.222 quantity. Further to inform you that Purchase requisition has been created via network which is having the same quantity – 0.222.This I can verify it by executing transaction CJ20N.
    In this case Purchase order which has been created user manually and initially quantity has been entered as 0,224 later on date - 23.03.2014 another user has changed it to 0.222 which is as similar to Purchase requisition quantity.
    Please let us know via transaction OLME what needs to be checked.
    Hope now issue is clear and expecting your valuable input to proceed further.
    Cheers,
    Kumar.S

  • Bridge suddenly appearing in Russian instead of English

    By opening Bridge (CS4) yesterday, it suddenly appeared in Russian, instead of English. How to change this back?
    Cascam. (Photoshop CS4 is normally running in English)
    Casper Cammeraat

    It was my understanding that one could not change the language from the purchased edition, so like I say this is odd.
    I would reset the preferences to factory defaults and see if that gets it back to English.  To do this close Bridge and then press and hold the Ctrl key and start Bridge.  You should get a  reset window with 3 options.  Choose all 3.

  • My macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

    my macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

    Try this.
    Erase and Reinstall OS X
    Note: This will delete all data on the disk. Back up important files before continuing.
    Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
    Select Disk Utility and then choose Continue.
    Select your startup disk (Macintosh HD by default) from the left.
    Select the Erase tab.
    Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
    After the disk is erased, choose Disk Utility > Quit Disk Utility.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    I hope I solved your question.
    Austin

  • Keyboard is not working good, when i "click" space it appears number "6" instead

    from my macbook pro- the keyboard is not working good, when i "click" space it appears number "6" instead.
    Any idea what is wrong here?
    I do not hace a Apple store close to me.

    Firefox 3.6 requires at least OS X 10.4, the last version that works on OS X 10.2.8 is Firefox 2.0.0.20 available from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/

  • Why does my signature box appear as "none" instead of the signature I have designated?

    Why does my signature box appear as "none" instead of the signature I have designated?

    Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.

  • Is there a PS setting where it can read my Canon Mark 3 5D's monochrome setting so that the files will also appear in monochrome instead of colour? Or do I have to change from RAW each time to Monochrome within PS (even if I have set up for Monochrome in

    Is there a PS setting where it can read my Canon Mark 3 5D's monochrome setting so that the files will also appear in the same monochrome structure (instead of appearing in colour as it is now when i open in PS, not even monochrome)? Or do I have to change from RAW each time to Monochrome within PS (even if I have set up for Monochrome in my 5D)?
    1. Basically I am taking photos with a monochrome setting with my 5D and the screen shows monochrome.
    2. when i import this onto my computer and open with PS, it opens in colour.
    3. when I change this to Monochrome in PS. (It cannot read my monochrome setting with my preference of the greyscale mix when I viewed it on my 5D)
    4. my question is: is there a way so that PS can read the monochrome setting from my 5D and display the same monochrome setting as my 5D instead of a different one from PS.
    Lily

    you need camera raw 6.7 or better.
    i don't know what version of ps you have so i can't say if it can be updated to use that, but update anyway.
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
    if you can't update your cr sufficiently, use the dng converter. DNG Converters:
    Win
    Mac

  • Elements default format appear as blocks instead of inline text

    I am creating an EDD and I have some issues with the way FrameMaker breaks each element instead of leaving it inline. This wouldn't be a problem if I was allowed to format children instead of elements; then I could fix the problems I am having.
    Short question is, is there a way to tell FrameMaker to open unformatted elements inline instead of as blocks?
    For instance, I have acronym elements within the text that wrap the definition and then wrap the term. When formatting it, it must show up as text and then the acronym after it with parentheses around it. I was able to make that happen by using run-ins, but the acronym element itself is no longer a part of the para. It is broken down to its own paragraph.
    Example: <para>Reference will be made to the <acronym><def>Air Force</def><term>AF</term></acronym> serial number.</para>
    should look like this:
    Reference will be made to the Air Force (AF) serial number.
    but instead looks like this:
    Reference will be made to the
    Air Force (AF) serial number.
    because I can't edit the EDD to have any para element with an acronym within it to format as a run-in.

    If you have solved the problem, fine; but let me clarify a few things:
    Example: <para>Reference will be made to the <acronym><def>Air Force</def><term>AF</term></acronym> serial number.</para>
    I also have <acronym> as a text range and it does not appear inline; it is still blocked as a paragraph.
    The FrameMaker EDD rules assume every element is to be formatted as a paragraph unless you tell it otherwise. Giving the acronym element text range formatting (inline) is not enough; you must also set def and term elements to be text range. This is a little bit of a guess on my part, because I have never tried putting paragraph-formatted elements inside a text-range-formatted element.
    Regarding the children without parents, the parent is there in the structure view but when typing down through the page view to make sure paragraph tags were placed correctly, some don't appear.
    This is still not clear; every element (except the document root element) must have a parent; othewise, the structure is invalid. You see the parent in the structure view, so the parent IS there.
    Not every element has to have a paragraph tag associated with it. The typical examples are elements that serve no formatting purpose but simply contain other elements. For example, suppose you have a chapter that has several sections. Each section may have a title element and several paragraph elements. The title element and the paragraph elements are formatted as paragraphs, each with a paragraph tag (if the EDD assigns paragraph tags). The containing section element does not have a paragraph tag; it simply contains the title and paragraph elements.
    NOTE that the EDD can assign formatting without assigning a paragraph tag. Maybe this is the cause of your concern. If your EDD is doing this, then some elements will not have tags, even thought the formatting is correct. {CAVEAT: My EDD assigns a default format list to the root element in a document. Except for a very few elements, all formatting is done as overrides to the default tag. In my case, each element displays the same tag, the default tag. I am not sure what happens when NO tag is assigned as the default.}}
    I haven't even begun to grasp how I'm going to work out building the
    LEP, TOC, LOI, LOT, and Indices yet. I know the build can be done
    manually, because I've done it and have templates for that already
    (although they are about ten years old).
    You likely need not do these lists manually. In a structured document or book, you can create these lists either as lists of paragraph tags (as one does in unstructured documents) or as lists of elements (for example, an LOT is a list of Table elements, if Table is the name of your table element). The elements in the list need not have paragraph tags in the document; typically they do not. See the FrameMaker user manual for details.
    Van

  • Now have V.5-No longer able to have home page appear (Mytelus). Instead blank page except for Bing Search window. I want to go back to earlier version.

    With earlier versions of Firefox, when I clicked on desktop icon, my home page of www.mytelus.com automatically appeared. I don't need the search engine called Bing which appears instead. You use to have a page that asked if one wanted to go back to an earlier version of Firefox. Also all my familiar menu bars are gone.
    Can you give me the site to visit that will allow me to delete version 5, and go back to say about version 3.5 or 4?

    I found solution to problem when I was directed to go back to page that listed problems. I found sentence that stated, something like, "How to make your own home page"

  • POWL showing incorrect Shopping Carts

    Hello,
    We are implementing SRM on Portal 7.3. When a User 1 logs into the Portal , he is able to View his Shopping carts. Now he logs Off from the Portal,and User 2 Logs in to access the POWL, he gets the Shopping Carts of User 1. Is this related to User Cache?
    Any help would be highly Appreciated.

    Hey rohit
    its a very common problem I have faced this with almost all clients and testing systems of SRM I have worked on . I dont know why SAP doesn't fix it up .  This issue is also in the marketplace when you try to open through different IDs one after another ..
    You would have to completely log off which means
    - Cleanup the Cache
    - Delete the cookies
    - End the session in backend (by a Technical User) through tcode SM12
    - Create a New Query in the Portal
    Another way is to use 2 browsers .. one Mozilla another internet explorer or maybe something else ..
    Hope that helps

  • Icon appearing in Organizer instead of photo

    I have Elements 11, using a PC, windows 8.1. I imported some photos from my camera's card and all images appeared in Organizer. I made some minor changes to a few (crop, red eye), and did a "save as," giving the photo a new name, and making the name changes while in Elements. Now, both the original image and the save as image appear in Organizer and Editor as a grayed out box, with an icon of a page with the corner folded over and a jagged line in the bottom right corner. The file name shows in Organizer, as well as the General Information and Metadata Information. If I go to my File Explorer and set it for thumbnails, I can see the original and edited images there. What have I done wrong and how can I correct this?
    Thank you.

    It was my understanding that one could not change the language from the purchased edition, so like I say this is odd.
    I would reset the preferences to factory defaults and see if that gets it back to English.  To do this close Bridge and then press and hold the Ctrl key and start Bridge.  You should get a  reset window with 3 options.  Choose all 3.

  • Some text in Safari appears as fractions instead of readable text

    On some web pages certain blocks of text appear as numerical fractions. When I go to the same web page in another browser, such as Camino, the text appears as it should. I have tried to change the font in Safari's preferences, but nothing seems to fix it. This seems to be a fairly recent problem happening on all our Macs and it seems to have started since we upgraded to OS X 10.4, or maybe even after one of the recent updates. Any help resolving this annoyance would be appreciated.
    Stetson

    Thanks All,
    actually, these machines are all running Suitcase to manage fonts, so I eliminated Helvetica Fractions from any of the suitcases and it resolved the issue. It's curious the problem only showed up in Safari and not Camaro, but I've learned not to question things once they are working properly!!
    Stetson

  • How do I get my Bookmarks to appear with icons instead of text?

    I do not want my bookmarked websites that are in my toolbar to appear as text only. i want them to show with the icon as well.

    The Bookmark Toolbar Icons add-on will display icons on the bookmarks toolbar on the Mac for Firefox versions up to 3.6. On Firefox 4 on the Mac the icons appear by default - https://addons.mozilla.org/firefox/addon/bookmark-toolbar-icons/

  • My iPhone caller image is still appearing full screen instead of in the right-hand corner,even though I've assigned the images to them on my mac.

    I had originally assigned images to my contacts through my iPhone which made them appear full screen when recieving/making a call, but now I want the images to appear in the top-right corner. I've assigned all new photos to override the old photos through my Address Book on my Mac, but they still continue to be full screen. Can anybody please explain to me what's going on? I'm an intermediate-advanced user. Thanks!

    You did not try what I provided. There is a difference between syncing and replacing.
    As with MobileMe, there should be an option with iCloud to replace info on cloud with what is available in the Address Book - all at once. This may not make any difference in this regard.

  • I have just downloaded camera Raw 8.8 to my computer that runs Photoshop CS6 for my Canon 7D Mark II.  CR2 files appear as Icons instead of thumbnails.  Does anyone know a fix

    Is there a way for CR2 files that are downloaded to Bridge running CS6 to appear as thumbnails rather than Icons in Bridge

    rhobbs713 wrote:
    Is there a way for CR2 files that are downloaded to Bridge…
    You don't download anything "into Bridge".  Bridge is a just a File Browser, you put your image files wherever you want and you point Bridge to whatever folder you put your raw CR2s in.

Maybe you are looking for